diff options
Diffstat (limited to 'arch/arm/mach-orion5x/rd88f5182-setup.c')
| -rw-r--r-- | arch/arm/mach-orion5x/rd88f5182-setup.c | 314 |
1 files changed, 314 insertions, 0 deletions
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c new file mode 100644 index 00000000..48da39b9 --- /dev/null +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -0,0 +1,314 @@ +/* + * arch/arm/mach-orion5x/rd88f5182-setup.c + * + * Marvell Orion-NAS Reference Design Setup + * + * Maintainer: Ronen Shitrit <rshitrit@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <linux/mtd/physmap.h> +#include <linux/mv643xx_eth.h> +#include <linux/ata_platform.h> +#include <linux/i2c.h> +#include <asm/mach-types.h> +#include <asm/gpio.h> +#include <asm/leds.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <mach/orion5x.h> +#include "common.h" +#include "mpp.h" + +/***************************************************************************** + * RD-88F5182 Info + ****************************************************************************/ + +/* + * 512K NOR flash Device bus boot chip select + */ + +#define RD88F5182_NOR_BOOT_BASE 0xf4000000 +#define RD88F5182_NOR_BOOT_SIZE SZ_512K + +/* + * 16M NOR flash on Device bus chip select 1 + */ + +#define RD88F5182_NOR_BASE 0xfc000000 +#define RD88F5182_NOR_SIZE SZ_16M + +/* + * PCI + */ + +#define RD88F5182_PCI_SLOT0_OFFS 7 +#define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7 +#define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6 + +/* + * GPIO Debug LED + */ + +#define RD88F5182_GPIO_DBG_LED 0 + +/***************************************************************************** + * 16M NOR Flash on Device bus CS1 + ****************************************************************************/ + +static struct physmap_flash_data rd88f5182_nor_flash_data = { + .width = 1, +}; + +static struct resource rd88f5182_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = RD88F5182_NOR_BASE, + .end = RD88F5182_NOR_BASE + RD88F5182_NOR_SIZE - 1, +}; + +static struct platform_device rd88f5182_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &rd88f5182_nor_flash_data, + }, + .num_resources = 1, + .resource = &rd88f5182_nor_flash_resource, +}; + +#ifdef CONFIG_LEDS + +/***************************************************************************** + * Use GPIO debug led as CPU active indication + ****************************************************************************/ + +static void rd88f5182_dbgled_event(led_event_t evt) +{ + int val; + + if (evt == led_idle_end) + val = 1; + else if (evt == led_idle_start) + val = 0; + else + return; + + gpio_set_value(RD88F5182_GPIO_DBG_LED, val); +} + +static int __init rd88f5182_dbgled_init(void) +{ + int pin; + + if (machine_is_rd88f5182()) { + pin = RD88F5182_GPIO_DBG_LED; + + if (gpio_request(pin, "DBGLED") == 0) { + if (gpio_direction_output(pin, 0) != 0) { + printk(KERN_ERR "rd88f5182_dbgled_init failed " + "to set output pin %d\n", pin); + gpio_free(pin); + return 0; + } + } else { + printk(KERN_ERR "rd88f5182_dbgled_init failed " + "to request gpio %d\n", pin); + return 0; + } + + leds_event = rd88f5182_dbgled_event; + } + + return 0; +} + +__initcall(rd88f5182_dbgled_init); + +#endif + +/***************************************************************************** + * PCI + ****************************************************************************/ + +void __init rd88f5182_pci_preinit(void) +{ + int pin; + + /* + * Configure PCI GPIO IRQ pins + */ + pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN; + if (gpio_request(pin, "PCI IntA") == 0) { + if (gpio_direction_input(pin) == 0) { + irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); + } else { + printk(KERN_ERR "rd88f5182_pci_preinit faield to " + "set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin); + } + + pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN; + if (gpio_request(pin, "PCI IntB") == 0) { + if (gpio_direction_input(pin) == 0) { + irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); + } else { + printk(KERN_ERR "rd88f5182_pci_preinit faield to " + "set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin); + } +} + +static int __init rd88f5182_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + /* + * Check for devices with hard-wired IRQs. + */ + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; + + /* + * PCI IRQs are connected via GPIOs + */ + switch (slot - RD88F5182_PCI_SLOT0_OFFS) { + case 0: + if (pin == 1) + return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN); + else + return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN); + default: + return -1; + } +} + +static struct hw_pci rd88f5182_pci __initdata = { + .nr_controllers = 2, + .preinit = rd88f5182_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, + .map_irq = rd88f5182_pci_map_irq, +}; + +static int __init rd88f5182_pci_init(void) +{ + if (machine_is_rd88f5182()) + pci_common_init(&rd88f5182_pci); + + return 0; +} + +subsys_initcall(rd88f5182_pci_init); + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data rd88f5182_eth_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +/***************************************************************************** + * RTC DS1338 on I2C bus + ****************************************************************************/ +static struct i2c_board_info __initdata rd88f5182_i2c_rtc = { + I2C_BOARD_INFO("ds1338", 0x68), +}; + +/***************************************************************************** + * Sata + ****************************************************************************/ +static struct mv_sata_platform_data rd88f5182_sata_data = { + .n_ports = 2, +}; + +/***************************************************************************** + * General Setup + ****************************************************************************/ +static unsigned int rd88f5182_mpp_modes[] __initdata = { + MPP0_GPIO, /* Debug Led */ + MPP1_GPIO, /* Reset Switch */ + MPP2_UNUSED, + MPP3_GPIO, /* RTC Int */ + MPP4_GPIO, + MPP5_GPIO, + MPP6_GPIO, /* PCI_intA */ + MPP7_GPIO, /* PCI_intB */ + MPP8_UNUSED, + MPP9_UNUSED, + MPP10_UNUSED, + MPP11_UNUSED, + MPP12_SATA_LED, /* SATA 0 presence */ + MPP13_SATA_LED, /* SATA 1 presence */ + MPP14_SATA_LED, /* SATA 0 active */ + MPP15_SATA_LED, /* SATA 1 active */ + MPP16_UNUSED, + MPP17_UNUSED, + MPP18_UNUSED, + MPP19_UNUSED, + 0, +}; + +static void __init rd88f5182_init(void) +{ + /* + * Setup basic Orion functions. Need to be called early. + */ + orion5x_init(); + + orion5x_mpp_conf(rd88f5182_mpp_modes); + + /* + * MPP[20] PCI Clock to MV88F5182 + * MPP[21] PCI Clock to mini PCI CON11 + * MPP[22] USB 0 over current indication + * MPP[23] USB 1 over current indication + * MPP[24] USB 1 over current enable + * MPP[25] USB 0 over current enable + */ + + /* + * Configure peripherals. + */ + orion5x_ehci0_init(); + orion5x_ehci1_init(); + orion5x_eth_init(&rd88f5182_eth_data); + orion5x_i2c_init(); + orion5x_sata_init(&rd88f5182_sata_data); + orion5x_uart0_init(); + orion5x_xor_init(); + + orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE, + RD88F5182_NOR_BOOT_SIZE); + + orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE); + platform_device_register(&rd88f5182_nor_flash); + + i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1); +} + +MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design") + /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */ + .boot_params = 0x00000100, + .init_machine = rd88f5182_init, + .map_io = orion5x_map_io, + .init_early = orion5x_init_early, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, +MACHINE_END |