diff options
Diffstat (limited to 'arch/arm/mach-omap2/sleep34xx.S')
| -rw-r--r-- | arch/arm/mach-omap2/sleep34xx.S | 754 |
1 files changed, 754 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S new file mode 100644 index 00000000..63f10669 --- /dev/null +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -0,0 +1,754 @@ +/* + * (C) Copyright 2007 + * Texas Instruments + * Karthik Dasu <karthik-dp@ti.com> + * + * (C) Copyright 2004 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <plat/sram.h> +#include <mach/io.h> + +#include "cm2xxx_3xxx.h" +#include "prm2xxx_3xxx.h" +#include "sdrc.h" +#include "control.h" + +/* + * Registers access definitions + */ +#define SDRC_SCRATCHPAD_SEM_OFFS 0xc +#define SDRC_SCRATCHPAD_SEM_V OMAP343X_SCRATCHPAD_REGADDR\ + (SDRC_SCRATCHPAD_SEM_OFFS) +#define PM_PREPWSTST_CORE_P OMAP3430_PRM_BASE + CORE_MOD +\ + OMAP3430_PM_PREPWSTST +#define PM_PWSTCTRL_MPU_P OMAP3430_PRM_BASE + MPU_MOD + OMAP2_PM_PWSTCTRL +#define CM_IDLEST1_CORE_V OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST1) +#define CM_IDLEST_CKGEN_V OMAP34XX_CM_REGADDR(PLL_MOD, CM_IDLEST) +#define SRAM_BASE_P OMAP3_SRAM_PA +#define CONTROL_STAT OMAP343X_CTRL_BASE + OMAP343X_CONTROL_STATUS +#define CONTROL_MEM_RTA_CTRL (OMAP343X_CTRL_BASE +\ + OMAP36XX_CONTROL_MEM_RTA_CTRL) + +/* Move this as correct place is available */ +#define SCRATCHPAD_MEM_OFFS 0x310 +#define SCRATCHPAD_BASE_P (OMAP343X_CTRL_BASE +\ + OMAP343X_CONTROL_MEM_WKUP +\ + SCRATCHPAD_MEM_OFFS) +#define SDRC_POWER_V OMAP34XX_SDRC_REGADDR(SDRC_POWER) +#define SDRC_SYSCONFIG_P (OMAP343X_SDRC_BASE + SDRC_SYSCONFIG) +#define SDRC_MR_0_P (OMAP343X_SDRC_BASE + SDRC_MR_0) +#define SDRC_EMR2_0_P (OMAP343X_SDRC_BASE + SDRC_EMR2_0) +#define SDRC_MANUAL_0_P (OMAP343X_SDRC_BASE + SDRC_MANUAL_0) +#define SDRC_MR_1_P (OMAP343X_SDRC_BASE + SDRC_MR_1) +#define SDRC_EMR2_1_P (OMAP343X_SDRC_BASE + SDRC_EMR2_1) +#define SDRC_MANUAL_1_P (OMAP343X_SDRC_BASE + SDRC_MANUAL_1) +#define SDRC_DLLA_STATUS_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS) +#define SDRC_DLLA_CTRL_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL) + +/* + * This file needs be built unconditionally as ARM to interoperate correctly + * with non-Thumb-2-capable firmware. + */ + .arm + +/* + * API functions + */ + +/* + * The "get_*restore_pointer" functions are used to provide a + * physical restore address where the ROM code jumps while waking + * up from MPU OFF/OSWR state. + * The restore pointer is stored into the scratchpad. + */ + + .text +/* Function call to get the restore pointer for resume from OFF */ +ENTRY(get_restore_pointer) + stmfd sp!, {lr} @ save registers on stack + adr r0, restore + ldmfd sp!, {pc} @ restore regs and return +ENDPROC(get_restore_pointer) + .align +ENTRY(get_restore_pointer_sz) + .word . - get_restore_pointer + + .text +/* Function call to get the restore pointer for 3630 resume from OFF */ +ENTRY(get_omap3630_restore_pointer) + stmfd sp!, {lr} @ save registers on stack + adr r0, restore_3630 + ldmfd sp!, {pc} @ restore regs and return +ENDPROC(get_omap3630_restore_pointer) + .align +ENTRY(get_omap3630_restore_pointer_sz) + .word . - get_omap3630_restore_pointer + + .text +/* Function call to get the restore pointer for ES3 to resume from OFF */ +ENTRY(get_es3_restore_pointer) + stmfd sp!, {lr} @ save registers on stack + adr r0, restore_es3 + ldmfd sp!, {pc} @ restore regs and return +ENDPROC(get_es3_restore_pointer) + .align +ENTRY(get_es3_restore_pointer_sz) + .word . - get_es3_restore_pointer + + .text +/* + * L2 cache needs to be toggled for stable OFF mode functionality on 3630. + * This function sets up a flag that will allow for this toggling to take + * place on 3630. Hopefully some version in the future may not need this. + */ +ENTRY(enable_omap3630_toggle_l2_on_restore) + stmfd sp!, {lr} @ save registers on stack + /* Setup so that we will disable and enable l2 */ + mov r1, #0x1 + adrl r2, l2dis_3630 @ may be too distant for plain adr + str r1, [r2] + ldmfd sp!, {pc} @ restore regs and return +ENDPROC(enable_omap3630_toggle_l2_on_restore) + + .text +/* Function to call rom code to save secure ram context */ + .align 3 +ENTRY(save_secure_ram_context) + stmfd sp!, {r1-r12, lr} @ save registers on stack + adr r3, api_params @ r3 points to parameters + str r0, [r3,#0x4] @ r0 has sdram address + ldr r12, high_mask + and r3, r3, r12 + ldr r12, sram_phy_addr_mask + orr r3, r3, r12 + mov r0, #25 @ set service ID for PPA + mov r12, r0 @ copy secure service ID in r12 + mov r1, #0 @ set task id for ROM code in r1 + mov r2, #4 @ set some flags in r2, r6 + mov r6, #0xff + dsb @ data write barrier + dmb @ data memory barrier + smc #1 @ call SMI monitor (smi #1) + nop + nop + nop + nop + ldmfd sp!, {r1-r12, pc} + .align +sram_phy_addr_mask: + .word SRAM_BASE_P +high_mask: + .word 0xffff +api_params: + .word 0x4, 0x0, 0x0, 0x1, 0x1 +ENDPROC(save_secure_ram_context) +ENTRY(save_secure_ram_context_sz) + .word . - save_secure_ram_context + +/* + * ====================== + * == Idle entry point == + * ====================== + */ + +/* + * Forces OMAP into idle state + * + * omap34xx_cpu_suspend() - This bit of code saves the CPU context if needed + * and executes the WFI instruction. Calling WFI effectively changes the + * power domains states to the desired target power states. + * + * + * Notes: + * - this code gets copied to internal SRAM at boot and after wake-up + * from OFF mode. The execution pointer in SRAM is _omap_sram_idle. + * - when the OMAP wakes up it continues at different execution points + * depending on the low power mode (non-OFF vs OFF modes), + * cf. 'Resume path for xxx mode' comments. + */ + .align 3 +ENTRY(omap34xx_cpu_suspend) + stmfd sp!, {r0-r12, lr} @ save registers on stack + + /* + * r0 contains CPU context save/restore pointer in sdram + * r1 contains information about saving context: + * 0 - No context lost + * 1 - Only L1 and logic lost + * 2 - Only L2 lost (Even L1 is retained we clean it along with L2) + * 3 - Both L1 and L2 lost and logic lost + */ + + /* Directly jump to WFI is the context save is not required */ + cmp r1, #0x0 + beq omap3_do_wfi + + /* Otherwise fall through to the save context code */ +save_context_wfi: + mov r8, r0 @ Store SDRAM address in r8 + mrc p15, 0, r5, c1, c0, 1 @ Read Auxiliary Control Register + mov r4, #0x1 @ Number of parameters for restore call + stmia r8!, {r4-r5} @ Push parameters for restore call + mrc p15, 1, r5, c9, c0, 2 @ Read L2 AUX ctrl register + stmia r8!, {r4-r5} @ Push parameters for restore call + + /* Check what that target sleep state is from r1 */ + cmp r1, #0x2 @ Only L2 lost, no need to save context + beq clean_caches + +l1_logic_lost: + mov r4, sp @ Store sp + mrs r5, spsr @ Store spsr + mov r6, lr @ Store lr + stmia r8!, {r4-r6} + + mrc p15, 0, r4, c1, c0, 2 @ Coprocessor access control register + mrc p15, 0, r5, c2, c0, 0 @ TTBR0 + mrc p15, 0, r6, c2, c0, 1 @ TTBR1 + mrc p15, 0, r7, c2, c0, 2 @ TTBCR + stmia r8!, {r4-r7} + + mrc p15, 0, r4, c3, c0, 0 @ Domain access Control Register + mrc p15, 0, r5, c10, c2, 0 @ PRRR + mrc p15, 0, r6, c10, c2, 1 @ NMRR + stmia r8!,{r4-r6} + + mrc p15, 0, r4, c13, c0, 1 @ Context ID + mrc p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID + mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address + mrs r7, cpsr @ Store current cpsr + stmia r8!, {r4-r7} + + mrc p15, 0, r4, c1, c0, 0 @ save control register + stmia r8!, {r4} + +clean_caches: + /* + * jump out to kernel flush routine + * - reuse that code is better + * - it executes in a cached space so is faster than refetch per-block + * - should be faster and will change with kernel + * - 'might' have to copy address, load and jump to it + * Flush all data from the L1 data cache before disabling + * SCTLR.C bit. + */ + ldr r1, kernel_flush + mov lr, pc + bx r1 + + /* + * Clear the SCTLR.C bit to prevent further data cache + * allocation. Clearing SCTLR.C would make all the data accesses + * strongly ordered and would not hit the cache. + */ + mrc p15, 0, r0, c1, c0, 0 + bic r0, r0, #(1 << 2) @ Disable the C bit + mcr p15, 0, r0, c1, c0, 0 + isb + + /* + * Invalidate L1 data cache. Even though only invalidate is + * necessary exported flush API is used here. Doing clean + * on already clean cache would be almost NOP. + */ + ldr r1, kernel_flush + blx r1 + /* + * The kernel doesn't interwork: v7_flush_dcache_all in particluar will + * always return in Thumb state when CONFIG_THUMB2_KERNEL is enabled. + * This sequence switches back to ARM. Note that .align may insert a + * nop: bx pc needs to be word-aligned in order to work. + */ + THUMB( .thumb ) + THUMB( .align ) + THUMB( bx pc ) + THUMB( nop ) + .arm + +omap3_do_wfi: + ldr r4, sdrc_power @ read the SDRC_POWER register + ldr r5, [r4] @ read the contents of SDRC_POWER + orr r5, r5, #0x40 @ enable self refresh on idle req + str r5, [r4] @ write back to SDRC_POWER register + + /* Data memory barrier and Data sync barrier */ + dsb + dmb + +/* + * =================================== + * == WFI instruction => Enter idle == + * =================================== + */ + wfi @ wait for interrupt + +/* + * =================================== + * == Resume path for non-OFF modes == + * =================================== + */ + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + bl wait_sdrc_ok + + mrc p15, 0, r0, c1, c0, 0 + tst r0, #(1 << 2) @ Check C bit enabled? + orreq r0, r0, #(1 << 2) @ Enable the C bit if cleared + mcreq p15, 0, r0, c1, c0, 0 + isb + +/* + * =================================== + * == Exit point from non-OFF modes == + * =================================== + */ + ldmfd sp!, {r0-r12, pc} @ restore regs and return + + +/* + * ============================== + * == Resume path for OFF mode == + * ============================== + */ + +/* + * The restore_* functions are called by the ROM code + * when back from WFI in OFF mode. + * Cf. the get_*restore_pointer functions. + * + * restore_es3: applies to 34xx >= ES3.0 + * restore_3630: applies to 36xx + * restore: common code for 3xxx + */ +restore_es3: + ldr r5, pm_prepwstst_core_p + ldr r4, [r5] + and r4, r4, #0x3 + cmp r4, #0x0 @ Check if previous power state of CORE is OFF + bne restore + adr r0, es3_sdrc_fix + ldr r1, sram_base + ldr r2, es3_sdrc_fix_sz + mov r2, r2, ror #2 +copy_to_sram: + ldmia r0!, {r3} @ val = *src + stmia r1!, {r3} @ *dst = val + subs r2, r2, #0x1 @ num_words-- + bne copy_to_sram + ldr r1, sram_base + blx r1 + b restore + +restore_3630: + ldr r1, pm_prepwstst_core_p + ldr r2, [r1] + and r2, r2, #0x3 + cmp r2, #0x0 @ Check if previous power state of CORE is OFF + bne restore + /* Disable RTA before giving control */ + ldr r1, control_mem_rta + mov r2, #OMAP36XX_RTA_DISABLE + str r2, [r1] + + /* Fall through to common code for the remaining logic */ + +restore: + /* + * Check what was the reason for mpu reset and store the reason in r9: + * 0 - No context lost + * 1 - Only L1 and logic lost + * 2 - Only L2 lost - In this case, we wont be here + * 3 - Both L1 and L2 lost + */ + ldr r1, pm_pwstctrl_mpu + ldr r2, [r1] + and r2, r2, #0x3 + cmp r2, #0x0 @ Check if target power state was OFF or RET + moveq r9, #0x3 @ MPU OFF => L1 and L2 lost + movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation + bne logic_l1_restore + + ldr r0, l2dis_3630 + cmp r0, #0x1 @ should we disable L2 on 3630? + bne skipl2dis + mrc p15, 0, r0, c1, c0, 1 + bic r0, r0, #2 @ disable L2 cache + mcr p15, 0, r0, c1, c0, 1 +skipl2dis: + ldr r0, control_stat + ldr r1, [r0] + and r1, #0x700 + cmp r1, #0x300 + beq l2_inv_gp + mov r0, #40 @ set service ID for PPA + mov r12, r0 @ copy secure Service ID in r12 + mov r1, #0 @ set task id for ROM code in r1 + mov r2, #4 @ set some flags in r2, r6 + mov r6, #0xff + adr r3, l2_inv_api_params @ r3 points to dummy parameters + dsb @ data write barrier + dmb @ data memory barrier + smc #1 @ call SMI monitor (smi #1) + /* Write to Aux control register to set some bits */ + mov r0, #42 @ set service ID for PPA + mov r12, r0 @ copy secure Service ID in r12 + mov r1, #0 @ set task id for ROM code in r1 + mov r2, #4 @ set some flags in r2, r6 + mov r6, #0xff + ldr r4, scratchpad_base + ldr r3, [r4, #0xBC] @ r3 points to parameters + dsb @ data write barrier + dmb @ data memory barrier + smc #1 @ call SMI monitor (smi #1) + +#ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE + /* Restore L2 aux control register */ + @ set service ID for PPA + mov r0, #CONFIG_OMAP3_L2_AUX_SECURE_SERVICE_SET_ID + mov r12, r0 @ copy service ID in r12 + mov r1, #0 @ set task ID for ROM code in r1 + mov r2, #4 @ set some flags in r2, r6 + mov r6, #0xff + ldr r4, scratchpad_base + ldr r3, [r4, #0xBC] + adds r3, r3, #8 @ r3 points to parameters + dsb @ data write barrier + dmb @ data memory barrier + smc #1 @ call SMI monitor (smi #1) +#endif + b logic_l1_restore + + .align +l2_inv_api_params: + .word 0x1, 0x00 +l2_inv_gp: + /* Execute smi to invalidate L2 cache */ + mov r12, #0x1 @ set up to invalidate L2 + smc #0 @ Call SMI monitor (smieq) + /* Write to Aux control register to set some bits */ + ldr r4, scratchpad_base + ldr r3, [r4,#0xBC] + ldr r0, [r3,#4] + mov r12, #0x3 + smc #0 @ Call SMI monitor (smieq) + ldr r4, scratchpad_base + ldr r3, [r4,#0xBC] + ldr r0, [r3,#12] + mov r12, #0x2 + smc #0 @ Call SMI monitor (smieq) +logic_l1_restore: + ldr r1, l2dis_3630 + cmp r1, #0x1 @ Test if L2 re-enable needed on 3630 + bne skipl2reen + mrc p15, 0, r1, c1, c0, 1 + orr r1, r1, #2 @ re-enable L2 cache + mcr p15, 0, r1, c1, c0, 1 +skipl2reen: + mov r1, #0 + /* + * Invalidate all instruction caches to PoU + * and flush branch target cache + */ + mcr p15, 0, r1, c7, c5, 0 + + ldr r4, scratchpad_base + ldr r3, [r4,#0xBC] + adds r3, r3, #16 + + ldmia r3!, {r4-r6} + mov sp, r4 @ Restore sp + msr spsr_cxsf, r5 @ Restore spsr + mov lr, r6 @ Restore lr + + ldmia r3!, {r4-r7} + mcr p15, 0, r4, c1, c0, 2 @ Coprocessor access Control Register + mcr p15, 0, r5, c2, c0, 0 @ TTBR0 + mcr p15, 0, r6, c2, c0, 1 @ TTBR1 + mcr p15, 0, r7, c2, c0, 2 @ TTBCR + + ldmia r3!,{r4-r6} + mcr p15, 0, r4, c3, c0, 0 @ Domain access Control Register + mcr p15, 0, r5, c10, c2, 0 @ PRRR + mcr p15, 0, r6, c10, c2, 1 @ NMRR + + + ldmia r3!,{r4-r7} + mcr p15, 0, r4, c13, c0, 1 @ Context ID + mcr p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID + mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address + msr cpsr, r7 @ store cpsr + + /* Enabling MMU here */ + mrc p15, 0, r7, c2, c0, 2 @ Read TTBRControl + /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1 */ + and r7, #0x7 + cmp r7, #0x0 + beq usettbr0 +ttbr_error: + /* + * More work needs to be done to support N[0:2] value other than 0 + * So looping here so that the error can be detected + */ + b ttbr_error +usettbr0: + mrc p15, 0, r2, c2, c0, 0 + ldr r5, ttbrbit_mask + and r2, r5 + mov r4, pc + ldr r5, table_index_mask + and r4, r5 @ r4 = 31 to 20 bits of pc + /* Extract the value to be written to table entry */ + ldr r1, table_entry + /* r1 has the value to be written to table entry*/ + add r1, r1, r4 + /* Getting the address of table entry to modify */ + lsr r4, #18 + /* r2 has the location which needs to be modified */ + add r2, r4 + /* Storing previous entry of location being modified */ + ldr r5, scratchpad_base + ldr r4, [r2] + str r4, [r5, #0xC0] + /* Modify the table entry */ + str r1, [r2] + /* + * Storing address of entry being modified + * - will be restored after enabling MMU + */ + ldr r5, scratchpad_base + str r2, [r5, #0xC4] + + mov r0, #0 + mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer + mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array + mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB + mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB + /* + * Restore control register. This enables the MMU. + * The caches and prediction are not enabled here, they + * will be enabled after restoring the MMU table entry. + */ + ldmia r3!, {r4} + /* Store previous value of control register in scratchpad */ + str r4, [r5, #0xC8] + ldr r2, cache_pred_disable_mask + and r4, r2 + mcr p15, 0, r4, c1, c0, 0 + dsb + isb + ldr r0, =restoremmu_on + bx r0 + +/* + * ============================== + * == Exit point from OFF mode == + * ============================== + */ +restoremmu_on: + ldmfd sp!, {r0-r12, pc} @ restore regs and return + + +/* + * Internal functions + */ + +/* This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0 */ + .text + .align 3 +ENTRY(es3_sdrc_fix) + ldr r4, sdrc_syscfg @ get config addr + ldr r5, [r4] @ get value + tst r5, #0x100 @ is part access blocked + it eq + biceq r5, r5, #0x100 @ clear bit if set + str r5, [r4] @ write back change + ldr r4, sdrc_mr_0 @ get config addr + ldr r5, [r4] @ get value + str r5, [r4] @ write back change + ldr r4, sdrc_emr2_0 @ get config addr + ldr r5, [r4] @ get value + str r5, [r4] @ write back change + ldr r4, sdrc_manual_0 @ get config addr + mov r5, #0x2 @ autorefresh command + str r5, [r4] @ kick off refreshes + ldr r4, sdrc_mr_1 @ get config addr + ldr r5, [r4] @ get value + str r5, [r4] @ write back change + ldr r4, sdrc_emr2_1 @ get config addr + ldr r5, [r4] @ get value + str r5, [r4] @ write back change + ldr r4, sdrc_manual_1 @ get config addr + mov r5, #0x2 @ autorefresh command + str r5, [r4] @ kick off refreshes + bx lr + + .align +sdrc_syscfg: + .word SDRC_SYSCONFIG_P +sdrc_mr_0: + .word SDRC_MR_0_P +sdrc_emr2_0: + .word SDRC_EMR2_0_P +sdrc_manual_0: + .word SDRC_MANUAL_0_P +sdrc_mr_1: + .word SDRC_MR_1_P +sdrc_emr2_1: + .word SDRC_EMR2_1_P +sdrc_manual_1: + .word SDRC_MANUAL_1_P +ENDPROC(es3_sdrc_fix) +ENTRY(es3_sdrc_fix_sz) + .word . - es3_sdrc_fix + +/* + * This function implements the erratum ID i581 WA: + * SDRC state restore before accessing the SDRAM + * + * Only used at return from non-OFF mode. For OFF + * mode the ROM code configures the SDRC and + * the DPLL before calling the restore code directly + * from DDR. + */ + +/* Make sure SDRC accesses are ok */ +wait_sdrc_ok: + +/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */ + ldr r4, cm_idlest_ckgen +wait_dpll3_lock: + ldr r5, [r4] + tst r5, #1 + beq wait_dpll3_lock + + ldr r4, cm_idlest1_core +wait_sdrc_ready: + ldr r5, [r4] + tst r5, #0x2 + bne wait_sdrc_ready + /* allow DLL powerdown upon hw idle req */ + ldr r4, sdrc_power + ldr r5, [r4] + bic r5, r5, #0x40 + str r5, [r4] + +/* + * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a + * base instead. + * Be careful not to clobber r7 when maintaing this code. + */ + +is_dll_in_lock_mode: + /* Is dll in lock mode? */ + ldr r4, sdrc_dlla_ctrl + ldr r5, [r4] + tst r5, #0x4 + bxne lr @ Return if locked + /* wait till dll locks */ + adr r7, kick_counter +wait_dll_lock_timed: + ldr r4, wait_dll_lock_counter + add r4, r4, #1 + str r4, [r7, #wait_dll_lock_counter - kick_counter] + ldr r4, sdrc_dlla_status + /* Wait 20uS for lock */ + mov r6, #8 +wait_dll_lock: + subs r6, r6, #0x1 + beq kick_dll + ldr r5, [r4] + and r5, r5, #0x4 + cmp r5, #0x4 + bne wait_dll_lock + bx lr @ Return when locked + + /* disable/reenable DLL if not locked */ +kick_dll: + ldr r4, sdrc_dlla_ctrl + ldr r5, [r4] + mov r6, r5 + bic r6, #(1<<3) @ disable dll + str r6, [r4] + dsb + orr r6, r6, #(1<<3) @ enable dll + str r6, [r4] + dsb + ldr r4, kick_counter + add r4, r4, #1 + str r4, [r7] @ kick_counter + b wait_dll_lock_timed + + .align +cm_idlest1_core: + .word CM_IDLEST1_CORE_V +cm_idlest_ckgen: + .word CM_IDLEST_CKGEN_V +sdrc_dlla_status: + .word SDRC_DLLA_STATUS_V +sdrc_dlla_ctrl: + .word SDRC_DLLA_CTRL_V +pm_prepwstst_core_p: + .word PM_PREPWSTST_CORE_P +pm_pwstctrl_mpu: + .word PM_PWSTCTRL_MPU_P +scratchpad_base: + .word SCRATCHPAD_BASE_P +sram_base: + .word SRAM_BASE_P + 0x8000 +sdrc_power: + .word SDRC_POWER_V +ttbrbit_mask: + .word 0xFFFFC000 +table_index_mask: + .word 0xFFF00000 +table_entry: + .word 0x00000C02 +cache_pred_disable_mask: + .word 0xFFFFE7FB +control_stat: + .word CONTROL_STAT +control_mem_rta: + .word CONTROL_MEM_RTA_CTRL +kernel_flush: + .word v7_flush_dcache_all +l2dis_3630: + .word 0 + /* + * When exporting to userspace while the counters are in SRAM, + * these 2 words need to be at the end to facilitate retrival! + */ +kick_counter: + .word 0 +wait_dll_lock_counter: + .word 0 +ENDPROC(omap34xx_cpu_suspend) + +ENTRY(omap34xx_cpu_suspend_sz) + .word . - omap34xx_cpu_suspend |