diff options
Diffstat (limited to 'arch/arm/mach-mv78xx0')
26 files changed, 2211 insertions, 0 deletions
diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig new file mode 100644 index 00000000..f2d309d0 --- /dev/null +++ b/arch/arm/mach-mv78xx0/Kconfig @@ -0,0 +1,25 @@ +if ARCH_MV78XX0 + +menu "Marvell MV78xx0 Implementations" + +config MACH_DB78X00_BP + bool "Marvell DB-78x00-BP Development Board" + help + Say 'Y' here if you want your kernel to support the + Marvell DB-78x00-BP Development Board. + +config MACH_RD78X00_MASA + bool "Marvell RD-78x00-mASA Reference Design" + help + Say 'Y' here if you want your kernel to support the + Marvell RD-78x00-mASA Reference Design. + +config MACH_TERASTATION_WXL + bool "Buffalo WLX (Terastation Duo) NAS" + help + Say 'Y' here if you want your kernel to support the + Buffalo WXL Nas. + +endmenu + +endif diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile new file mode 100644 index 00000000..67a13f9b --- /dev/null +++ b/arch/arm/mach-mv78xx0/Makefile @@ -0,0 +1,4 @@ +obj-y += common.o addr-map.o mpp.o irq.o pcie.o +obj-$(CONFIG_MACH_DB78X00_BP) += db78x00-bp-setup.o +obj-$(CONFIG_MACH_RD78X00_MASA) += rd78x00-masa-setup.o +obj-$(CONFIG_MACH_TERASTATION_WXL) += buffalo-wxl-setup.o diff --git a/arch/arm/mach-mv78xx0/Makefile.boot b/arch/arm/mach-mv78xx0/Makefile.boot new file mode 100644 index 00000000..67039c3e --- /dev/null +++ b/arch/arm/mach-mv78xx0/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c new file mode 100644 index 00000000..311d5b0e --- /dev/null +++ b/arch/arm/mach-mv78xx0/addr-map.c @@ -0,0 +1,156 @@ +/* + * arch/arm/mach-mv78xx0/addr-map.c + * + * Address map functions for Marvell MV78xx0 SoCs + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mbus.h> +#include <linux/io.h> +#include "common.h" + +/* + * Generic Address Decode Windows bit settings + */ +#define TARGET_DDR 0 +#define TARGET_DEV_BUS 1 +#define TARGET_PCIE0 4 +#define TARGET_PCIE1 8 +#define TARGET_PCIE(i) ((i) ? TARGET_PCIE1 : TARGET_PCIE0) +#define ATTR_DEV_SPI_ROM 0x1f +#define ATTR_DEV_BOOT 0x2f +#define ATTR_DEV_CS3 0x37 +#define ATTR_DEV_CS2 0x3b +#define ATTR_DEV_CS1 0x3d +#define ATTR_DEV_CS0 0x3e +#define ATTR_PCIE_IO(l) (0xf0 & ~(0x10 << (l))) +#define ATTR_PCIE_MEM(l) (0xf8 & ~(0x10 << (l))) + +/* + * Helpers to get DDR bank info + */ +#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3)) +#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3)) + +/* + * CPU Address Decode Windows registers + */ +#define WIN0_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4)) +#define WIN8_OFF(n) (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4)) +#define WIN_CTRL_OFF 0x0000 +#define WIN_BASE_OFF 0x0004 +#define WIN_REMAP_LO_OFF 0x0008 +#define WIN_REMAP_HI_OFF 0x000c + + +struct mbus_dram_target_info mv78xx0_mbus_dram_info; + +static void __init __iomem *win_cfg_base(int win) +{ + /* + * Find the control register base address for this window. + * + * BRIDGE_VIRT_BASE points to the right (CPU0's or CPU1's) + * MBUS bridge depending on which CPU core we're running on, + * so we don't need to take that into account here. + */ + + return (void __iomem *)((win < 8) ? WIN0_OFF(win) : WIN8_OFF(win)); +} + +static int __init cpu_win_can_remap(int win) +{ + if (win < 8) + return 1; + + return 0; +} + +static void __init setup_cpu_win(int win, u32 base, u32 size, + u8 target, u8 attr, int remap) +{ + void __iomem *addr = win_cfg_base(win); + u32 ctrl; + + base &= 0xffff0000; + ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1; + + writel(base, addr + WIN_BASE_OFF); + writel(ctrl, addr + WIN_CTRL_OFF); + if (cpu_win_can_remap(win)) { + if (remap < 0) + remap = base; + + writel(remap & 0xffff0000, addr + WIN_REMAP_LO_OFF); + writel(0, addr + WIN_REMAP_HI_OFF); + } +} + +void __init mv78xx0_setup_cpu_mbus(void) +{ + void __iomem *addr; + int i; + int cs; + + /* + * First, disable and clear windows. + */ + for (i = 0; i < 14; i++) { + addr = win_cfg_base(i); + + writel(0, addr + WIN_BASE_OFF); + writel(0, addr + WIN_CTRL_OFF); + if (cpu_win_can_remap(i)) { + writel(0, addr + WIN_REMAP_LO_OFF); + writel(0, addr + WIN_REMAP_HI_OFF); + } + } + + /* + * Setup MBUS dram target info. + */ + mv78xx0_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; + + if (mv78xx0_core_index() == 0) + addr = (void __iomem *)DDR_WINDOW_CPU0_BASE; + else + addr = (void __iomem *)DDR_WINDOW_CPU1_BASE; + + for (i = 0, cs = 0; i < 4; i++) { + u32 base = readl(addr + DDR_BASE_CS_OFF(i)); + u32 size = readl(addr + DDR_SIZE_CS_OFF(i)); + + /* + * Chip select enabled? + */ + if (size & 1) { + struct mbus_dram_window *w; + + w = &mv78xx0_mbus_dram_info.cs[cs++]; + w->cs_index = i; + w->mbus_attr = 0xf & ~(1 << i); + w->base = base & 0xffff0000; + w->size = (size | 0x0000ffff) + 1; + } + } + mv78xx0_mbus_dram_info.num_cs = cs; +} + +void __init mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size, + int maj, int min) +{ + setup_cpu_win(window, base, size, TARGET_PCIE(maj), + ATTR_PCIE_IO(min), -1); +} + +void __init mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size, + int maj, int min) +{ + setup_cpu_win(window, base, size, TARGET_PCIE(maj), + ATTR_PCIE_MEM(min), -1); +} diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c new file mode 100644 index 00000000..20f3f125 --- /dev/null +++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c @@ -0,0 +1,154 @@ +/* + * arch/arm/mach-mv78xx0/buffalo-wxl-setup.c + * + * Buffalo WXL (Terastation Duo) Setup routines + * + * sebastien requiem <sebastien@requiem.fr> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/ethtool.h> +#include <linux/i2c.h> +#include <mach/mv78xx0.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include "common.h" +#include "mpp.h" + + +/* This arch has 2 Giga Ethernet */ + +static struct mv643xx_eth_platform_data db78x00_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv643xx_eth_platform_data db78x00_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + + +/* 2 SATA controller supporting HotPlug */ + +static struct mv_sata_platform_data db78x00_sata_data = { + .n_ports = 2, +}; + +static struct i2c_board_info __initdata db78x00_i2c_rtc = { + I2C_BOARD_INFO("ds1338", 0x68), +}; + + +static unsigned int wxl_mpp_config[] __initdata = { + MPP0_GE1_TXCLK, + MPP1_GE1_TXCTL, + MPP2_GE1_RXCTL, + MPP3_GE1_RXCLK, + MPP4_GE1_TXD0, + MPP5_GE1_TXD1, + MPP6_GE1_TXD2, + MPP7_GE1_TXD3, + MPP8_GE1_RXD0, + MPP9_GE1_RXD1, + MPP10_GE1_RXD2, + MPP11_GE1_RXD3, + MPP12_GPIO, + MPP13_SYSRST_OUTn, + MPP14_SATA1_ACTn, + MPP15_SATA0_ACTn, + MPP16_GPIO, + MPP17_GPIO, + MPP18_GPIO, + MPP19_GPIO, + MPP20_GPIO, + MPP21_GPIO, + MPP22_GPIO, + MPP23_GPIO, + MPP24_UA2_TXD, + MPP25_UA2_RXD, + MPP26_UA2_CTSn, + MPP27_UA2_RTSn, + MPP28_GPIO, + MPP29_SYSRST_OUTn, + MPP30_GPIO, + MPP31_GPIO, + MPP32_GPIO, + MPP33_GPIO, + MPP34_GPIO, + MPP35_GPIO, + MPP36_GPIO, + MPP37_GPIO, + MPP38_GPIO, + MPP39_GPIO, + MPP40_UNUSED, + MPP41_UNUSED, + MPP42_UNUSED, + MPP43_UNUSED, + MPP44_UNUSED, + MPP45_UNUSED, + MPP46_UNUSED, + MPP47_UNUSED, + MPP48_SATA1_ACTn, + MPP49_SATA0_ACTn, + 0 +}; + + +static void __init wxl_init(void) +{ + /* + * Basic MV78xx0 setup. Needs to be called early. + */ + mv78xx0_init(); + mv78xx0_mpp_conf(wxl_mpp_config); + + /* + * Partition on-chip peripherals between the two CPU cores. + */ + mv78xx0_ehci0_init(); + mv78xx0_ehci1_init(); + mv78xx0_ehci2_init(); + mv78xx0_ge00_init(&db78x00_ge00_data); + mv78xx0_ge01_init(&db78x00_ge01_data); + mv78xx0_sata_init(&db78x00_sata_data); + mv78xx0_uart0_init(); + mv78xx0_uart1_init(); + mv78xx0_uart2_init(); + mv78xx0_uart3_init(); + mv78xx0_i2c_init(); + i2c_register_board_info(0, &db78x00_i2c_rtc, 1); +} + +static int __init wxl_pci_init(void) +{ + if (machine_is_terastation_wxl()) { + /* + * Assign the x16 PCIe slot on the board to CPU core + * #0, and let CPU core #1 have the four x1 slots. + */ + if (mv78xx0_core_index() == 0) + mv78xx0_pcie_init(0, 1); + else + mv78xx0_pcie_init(1, 0); + } + + return 0; +} +subsys_initcall(wxl_pci_init); + +MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL") + /* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */ + .boot_params = 0x00000100, + .init_machine = wxl_init, + .map_io = mv78xx0_map_io, + .init_early = mv78xx0_init_early, + .init_irq = mv78xx0_init_irq, + .timer = &mv78xx0_timer, +MACHINE_END diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c new file mode 100644 index 00000000..d90e244e --- /dev/null +++ b/arch/arm/mach-mv78xx0/common.c @@ -0,0 +1,404 @@ +/* + * arch/arm/mach-mv78xx0/common.c + * + * Core functions for Marvell MV78xx0 SoCs + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> +#include <linux/mbus.h> +#include <linux/ata_platform.h> +#include <linux/ethtool.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> +#include <mach/mv78xx0.h> +#include <mach/bridge-regs.h> +#include <plat/cache-feroceon-l2.h> +#include <plat/ehci-orion.h> +#include <plat/orion_nand.h> +#include <plat/time.h> +#include <plat/common.h> +#include "common.h" + +static int get_tclk(void); + +/***************************************************************************** + * Common bits + ****************************************************************************/ +int mv78xx0_core_index(void) +{ + u32 extra; + + /* + * Read Extra Features register. + */ + __asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (extra)); + + return !!(extra & 0x00004000); +} + +static int get_hclk(void) +{ + int hclk; + + /* + * HCLK tick rate is configured by DEV_D[7:5] pins. + */ + switch ((readl(SAMPLE_AT_RESET_LOW) >> 5) & 7) { + case 0: + hclk = 166666667; + break; + case 1: + hclk = 200000000; + break; + case 2: + hclk = 266666667; + break; + case 3: + hclk = 333333333; + break; + case 4: + hclk = 400000000; + break; + default: + panic("unknown HCLK PLL setting: %.8x\n", + readl(SAMPLE_AT_RESET_LOW)); + } + + return hclk; +} + +static void get_pclk_l2clk(int hclk, int core_index, int *pclk, int *l2clk) +{ + u32 cfg; + + /* + * Core #0 PCLK/L2CLK is configured by bits [13:8], core #1 + * PCLK/L2CLK by bits [19:14]. + */ + if (core_index == 0) { + cfg = (readl(SAMPLE_AT_RESET_LOW) >> 8) & 0x3f; + } else { + cfg = (readl(SAMPLE_AT_RESET_LOW) >> 14) & 0x3f; + } + + /* + * Bits [11:8] ([17:14] for core #1) configure the PCLK:HCLK + * ratio (1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6). + */ + *pclk = ((u64)hclk * (2 + (cfg & 0xf))) >> 1; + + /* + * Bits [13:12] ([19:18] for core #1) configure the PCLK:L2CLK + * ratio (1, 2, 3). + */ + *l2clk = *pclk / (((cfg >> 4) & 3) + 1); +} + +static int get_tclk(void) +{ + int tclk; + + /* + * TCLK tick rate is configured by DEV_A[2:0] strap pins. + */ + switch ((readl(SAMPLE_AT_RESET_HIGH) >> 6) & 7) { + case 1: + tclk = 166666667; + break; + case 3: + tclk = 200000000; + break; + default: + panic("unknown TCLK PLL setting: %.8x\n", + readl(SAMPLE_AT_RESET_HIGH)); + } + + return tclk; +} + + +/***************************************************************************** + * I/O Address Mapping + ****************************************************************************/ +static struct map_desc mv78xx0_io_desc[] __initdata = { + { + .virtual = MV78XX0_CORE_REGS_VIRT_BASE, + .pfn = 0, + .length = MV78XX0_CORE_REGS_SIZE, + .type = MT_DEVICE, + }, { + .virtual = MV78XX0_PCIE_IO_VIRT_BASE(0), + .pfn = __phys_to_pfn(MV78XX0_PCIE_IO_PHYS_BASE(0)), + .length = MV78XX0_PCIE_IO_SIZE * 8, + .type = MT_DEVICE, + }, { + .virtual = MV78XX0_REGS_VIRT_BASE, + .pfn = __phys_to_pfn(MV78XX0_REGS_PHYS_BASE), + .length = MV78XX0_REGS_SIZE, + .type = MT_DEVICE, + }, +}; + +void __init mv78xx0_map_io(void) +{ + unsigned long phys; + + /* + * Map the right set of per-core registers depending on + * which core we are running on. + */ + if (mv78xx0_core_index() == 0) { + phys = MV78XX0_CORE0_REGS_PHYS_BASE; + } else { + phys = MV78XX0_CORE1_REGS_PHYS_BASE; + } + mv78xx0_io_desc[0].pfn = __phys_to_pfn(phys); + + iotable_init(mv78xx0_io_desc, ARRAY_SIZE(mv78xx0_io_desc)); +} + + +/***************************************************************************** + * EHCI + ****************************************************************************/ +void __init mv78xx0_ehci0_init(void) +{ + orion_ehci_init(&mv78xx0_mbus_dram_info, + USB0_PHYS_BASE, IRQ_MV78XX0_USB_0, EHCI_PHY_NA); +} + + +/***************************************************************************** + * EHCI1 + ****************************************************************************/ +void __init mv78xx0_ehci1_init(void) +{ + orion_ehci_1_init(&mv78xx0_mbus_dram_info, + USB1_PHYS_BASE, IRQ_MV78XX0_USB_1); +} + + +/***************************************************************************** + * EHCI2 + ****************************************************************************/ +void __init mv78xx0_ehci2_init(void) +{ + orion_ehci_2_init(&mv78xx0_mbus_dram_info, + USB2_PHYS_BASE, IRQ_MV78XX0_USB_2); +} + + +/***************************************************************************** + * GE00 + ****************************************************************************/ +void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) +{ + orion_ge00_init(eth_data, &mv78xx0_mbus_dram_info, + GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM, + IRQ_MV78XX0_GE_ERR, get_tclk()); +} + + +/***************************************************************************** + * GE01 + ****************************************************************************/ +void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data) +{ + orion_ge01_init(eth_data, &mv78xx0_mbus_dram_info, + GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM, + NO_IRQ, get_tclk()); +} + + +/***************************************************************************** + * GE10 + ****************************************************************************/ +void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data) +{ + u32 dev, rev; + + /* + * On the Z0, ge10 and ge11 are internally connected back + * to back, and not brought out. + */ + mv78xx0_pcie_id(&dev, &rev); + if (dev == MV78X00_Z0_DEV_ID) { + eth_data->phy_addr = MV643XX_ETH_PHY_NONE; + eth_data->speed = SPEED_1000; + eth_data->duplex = DUPLEX_FULL; + } + + orion_ge10_init(eth_data, &mv78xx0_mbus_dram_info, + GE10_PHYS_BASE, IRQ_MV78XX0_GE10_SUM, + NO_IRQ, get_tclk()); +} + + +/***************************************************************************** + * GE11 + ****************************************************************************/ +void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data) +{ + u32 dev, rev; + + /* + * On the Z0, ge10 and ge11 are internally connected back + * to back, and not brought out. + */ + mv78xx0_pcie_id(&dev, &rev); + if (dev == MV78X00_Z0_DEV_ID) { + eth_data->phy_addr = MV643XX_ETH_PHY_NONE; + eth_data->speed = SPEED_1000; + eth_data->duplex = DUPLEX_FULL; + } + + orion_ge11_init(eth_data, &mv78xx0_mbus_dram_info, + GE11_PHYS_BASE, IRQ_MV78XX0_GE11_SUM, + NO_IRQ, get_tclk()); +} + +/***************************************************************************** + * I2C + ****************************************************************************/ +void __init mv78xx0_i2c_init(void) +{ + orion_i2c_init(I2C_0_PHYS_BASE, IRQ_MV78XX0_I2C_0, 8); + orion_i2c_1_init(I2C_1_PHYS_BASE, IRQ_MV78XX0_I2C_1, 8); +} + +/***************************************************************************** + * SATA + ****************************************************************************/ +void __init mv78xx0_sata_init(struct mv_sata_platform_data *sata_data) +{ + orion_sata_init(sata_data, &mv78xx0_mbus_dram_info, + SATA_PHYS_BASE, IRQ_MV78XX0_SATA); +} + + +/***************************************************************************** + * UART0 + ****************************************************************************/ +void __init mv78xx0_uart0_init(void) +{ + orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE, + IRQ_MV78XX0_UART_0, get_tclk()); +} + + +/***************************************************************************** + * UART1 + ****************************************************************************/ +void __init mv78xx0_uart1_init(void) +{ + orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE, + IRQ_MV78XX0_UART_1, get_tclk()); +} + + +/***************************************************************************** + * UART2 + ****************************************************************************/ +void __init mv78xx0_uart2_init(void) +{ + orion_uart2_init(UART2_VIRT_BASE, UART2_PHYS_BASE, + IRQ_MV78XX0_UART_2, get_tclk()); +} + +/***************************************************************************** + * UART3 + ****************************************************************************/ +void __init mv78xx0_uart3_init(void) +{ + orion_uart3_init(UART3_VIRT_BASE, UART3_PHYS_BASE, + IRQ_MV78XX0_UART_3, get_tclk()); +} + +/***************************************************************************** + * Time handling + ****************************************************************************/ +void __init mv78xx0_init_early(void) +{ + orion_time_set_base(TIMER_VIRT_BASE); +} + +static void mv78xx0_timer_init(void) +{ + orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, + IRQ_MV78XX0_TIMER_1, get_tclk()); +} + +struct sys_timer mv78xx0_timer = { + .init = mv78xx0_timer_init, +}; + + +/***************************************************************************** + * General + ****************************************************************************/ +static char * __init mv78xx0_id(void) +{ + u32 dev, rev; + + mv78xx0_pcie_id(&dev, &rev); + + if (dev == MV78X00_Z0_DEV_ID) { + if (rev == MV78X00_REV_Z0) + return "MV78X00-Z0"; + else + return "MV78X00-Rev-Unsupported"; + } else if (dev == MV78100_DEV_ID) { + if (rev == MV78100_REV_A0) + return "MV78100-A0"; + else if (rev == MV78100_REV_A1) + return "MV78100-A1"; + else + return "MV78100-Rev-Unsupported"; + } else if (dev == MV78200_DEV_ID) { + if (rev == MV78100_REV_A0) + return "MV78200-A0"; + else + return "MV78200-Rev-Unsupported"; + } else { + return "Device-Unknown"; + } +} + +static int __init is_l2_writethrough(void) +{ + return !!(readl(CPU_CONTROL) & L2_WRITETHROUGH); +} + +void __init mv78xx0_init(void) +{ + int core_index; + int hclk; + int pclk; + int l2clk; + int tclk; + + core_index = mv78xx0_core_index(); + hclk = get_hclk(); + get_pclk_l2clk(hclk, core_index, &pclk, &l2clk); + tclk = get_tclk(); + + printk(KERN_INFO "%s ", mv78xx0_id()); + printk("core #%d, ", core_index); + printk("PCLK = %dMHz, ", (pclk + 499999) / 1000000); + printk("L2 = %dMHz, ", (l2clk + 499999) / 1000000); + printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000); + printk("TCLK = %dMHz\n", (tclk + 499999) / 1000000); + + mv78xx0_setup_cpu_mbus(); + +#ifdef CONFIG_CACHE_FEROCEON_L2 + feroceon_l2_init(is_l2_writethrough()); +#endif +} diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h new file mode 100644 index 00000000..632e63d6 --- /dev/null +++ b/arch/arm/mach-mv78xx0/common.h @@ -0,0 +1,53 @@ +/* + * arch/arm/mach-mv78xx0/common.h + * + * Core functions for Marvell MV78xx0 SoCs + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ARCH_MV78XX0_COMMON_H +#define __ARCH_MV78XX0_COMMON_H + +struct mv643xx_eth_platform_data; +struct mv_sata_platform_data; + +/* + * Basic MV78xx0 init functions used early by machine-setup. + */ +int mv78xx0_core_index(void); +void mv78xx0_map_io(void); +void mv78xx0_init(void); +void mv78xx0_init_early(void); +void mv78xx0_init_irq(void); + +extern struct mbus_dram_target_info mv78xx0_mbus_dram_info; +void mv78xx0_setup_cpu_mbus(void); +void mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size, + int maj, int min); +void mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size, + int maj, int min); + +void mv78xx0_pcie_id(u32 *dev, u32 *rev); + +void mv78xx0_ehci0_init(void); +void mv78xx0_ehci1_init(void); +void mv78xx0_ehci2_init(void); +void mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data); +void mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data); +void mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data); +void mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data); +void mv78xx0_pcie_init(int init_port0, int init_port1); +void mv78xx0_sata_init(struct mv_sata_platform_data *sata_data); +void mv78xx0_uart0_init(void); +void mv78xx0_uart1_init(void); +void mv78xx0_uart2_init(void); +void mv78xx0_uart3_init(void); +void mv78xx0_i2c_init(void); + +extern struct sys_timer mv78xx0_timer; + + +#endif diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c new file mode 100644 index 00000000..df5aebe5 --- /dev/null +++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c @@ -0,0 +1,102 @@ +/* + * arch/arm/mach-mv78xx0/db78x00-bp-setup.c + * + * Marvell DB-78x00-BP Development Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/ethtool.h> +#include <linux/i2c.h> +#include <mach/mv78xx0.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include "common.h" + +static struct mv643xx_eth_platform_data db78x00_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static struct mv643xx_eth_platform_data db78x00_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(9), +}; + +static struct mv643xx_eth_platform_data db78x00_ge10_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(10), +}; + +static struct mv643xx_eth_platform_data db78x00_ge11_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(11), +}; + +static struct mv_sata_platform_data db78x00_sata_data = { + .n_ports = 2, +}; + +static struct i2c_board_info __initdata db78x00_i2c_rtc = { + I2C_BOARD_INFO("ds1338", 0x68), +}; + + +static void __init db78x00_init(void) +{ + /* + * Basic MV78xx0 setup. Needs to be called early. + */ + mv78xx0_init(); + + /* + * Partition on-chip peripherals between the two CPU cores. + */ + if (mv78xx0_core_index() == 0) { + mv78xx0_ehci0_init(); + mv78xx0_ehci1_init(); + mv78xx0_ehci2_init(); + mv78xx0_ge00_init(&db78x00_ge00_data); + mv78xx0_ge01_init(&db78x00_ge01_data); + mv78xx0_ge10_init(&db78x00_ge10_data); + mv78xx0_ge11_init(&db78x00_ge11_data); + mv78xx0_sata_init(&db78x00_sata_data); + mv78xx0_uart0_init(); + mv78xx0_uart2_init(); + mv78xx0_i2c_init(); + i2c_register_board_info(0, &db78x00_i2c_rtc, 1); + } else { + mv78xx0_uart1_init(); + mv78xx0_uart3_init(); + } +} + +static int __init db78x00_pci_init(void) +{ + if (machine_is_db78x00_bp()) { + /* + * Assign the x16 PCIe slot on the board to CPU core + * #0, and let CPU core #1 have the four x1 slots. + */ + if (mv78xx0_core_index() == 0) + mv78xx0_pcie_init(0, 1); + else + mv78xx0_pcie_init(1, 0); + } + + return 0; +} +subsys_initcall(db78x00_pci_init); + +MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board") + /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ + .boot_params = 0x00000100, + .init_machine = db78x00_init, + .map_io = mv78xx0_map_io, + .init_early = mv78xx0_init_early, + .init_irq = mv78xx0_init_irq, + .timer = &mv78xx0_timer, +MACHINE_END diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h new file mode 100644 index 00000000..c64dbb96 --- /dev/null +++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h @@ -0,0 +1,35 @@ +/* + * arch/arm/mach-mv78xx0/include/mach/bridge-regs.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_BRIDGE_REGS_H +#define __ASM_ARCH_BRIDGE_REGS_H + +#include <mach/mv78xx0.h> + +#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) +#define L2_WRITETHROUGH 0x00020000 + +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define SOFT_RESET_OUT_EN 0x00000004 + +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SOFT_RESET 0x00000001 + +#define BRIDGE_INT_TIMER1_CLR (~0x0004) + +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_CAUSE_ERR_OFF 0x0000 +#define IRQ_CAUSE_LOW_OFF 0x0004 +#define IRQ_CAUSE_HIGH_OFF 0x0008 +#define IRQ_MASK_ERR_OFF 0x000c +#define IRQ_MASK_LOW_OFF 0x0010 +#define IRQ_MASK_HIGH_OFF 0x0014 + +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) + +#endif diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S new file mode 100644 index 00000000..04891428 --- /dev/null +++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-mv78xx0/include/mach/debug-macro.S + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <mach/mv78xx0.h> + + .macro addruart, rp, rv + ldr \rp, =MV78XX0_REGS_PHYS_BASE + ldr \rv, =MV78XX0_REGS_VIRT_BASE + orr \rp, \rp, #0x00012000 + orr \rv, \rv, #0x00012000 + .endm + +#define UART_SHIFT 2 +#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S new file mode 100644 index 00000000..66ae2d29 --- /dev/null +++ b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S @@ -0,0 +1,47 @@ +/* + * arch/arm/mach-mv78xx0/include/mach/entry-macro.S + * + * Low-level IRQ helper macros for Marvell MV78xx0 platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <mach/bridge-regs.h> + + .macro disable_fiq + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =IRQ_VIRT_BASE + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + @ check low interrupts + ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF] + ldr \tmp, [\base, #IRQ_MASK_LOW_OFF] + mov \irqnr, #31 + ands \irqstat, \irqstat, \tmp + bne 1001f + + @ if no low interrupts set, check high interrupts + ldr \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF] + ldr \tmp, [\base, #IRQ_MASK_HIGH_OFF] + mov \irqnr, #63 + ands \irqstat, \irqstat, \tmp + bne 1001f + + @ if no high interrupts set, check error interrupts + ldr \irqstat, [\base, #IRQ_CAUSE_ERR_OFF] + ldr \tmp, [\base, #IRQ_MASK_ERR_OFF] + mov \irqnr, #95 + ands \irqstat, \irqstat, \tmp + + @ find first active interrupt source +1001: clzne \irqstat, \irqstat + subne \irqnr, \irqnr, \irqstat + .endm diff --git a/arch/arm/mach-mv78xx0/include/mach/gpio.h b/arch/arm/mach-mv78xx0/include/mach/gpio.h new file mode 100644 index 00000000..77e1b843 --- /dev/null +++ b/arch/arm/mach-mv78xx0/include/mach/gpio.h @@ -0,0 +1,9 @@ +/* + * arch/asm-arm/mach-mv78xx0/include/mach/gpio.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <plat/gpio.h> diff --git a/arch/arm/mach-mv78xx0/include/mach/hardware.h b/arch/arm/mach-mv78xx0/include/mach/hardware.h new file mode 100644 index 00000000..5d887557 --- /dev/null +++ b/arch/arm/mach-mv78xx0/include/mach/hardware.h @@ -0,0 +1,21 @@ +/* + * arch/arm/mach-mv78xx0/include/mach/hardware.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#include "mv78xx0.h" + +#define pcibios_assign_all_busses() 1 + +#define PCIBIOS_MIN_IO 0x00001000 +#define PCIBIOS_MIN_MEM 0x01000000 +#define PCIMEM_BASE MV78XX0_PCIE_MEM_PHYS_BASE /* mem base for VGA */ + + +#endif diff --git a/arch/arm/mach-mv78xx0/include/mach/io.h b/arch/arm/mach-mv78xx0/include/mach/io.h new file mode 100644 index 00000000..450e0e1a --- /dev/null +++ b/arch/arm/mach-mv78xx0/include/mach/io.h @@ -0,0 +1,26 @@ +/* + * arch/arm/mach-mv78xx0/include/mach/io.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_IO_H +#define __ASM_ARCH_IO_H + +#include "mv78xx0.h" + +#define IO_SPACE_LIMIT 0xffffffff + +static inline void __iomem *__io(unsigned long addr) +{ + return (void __iomem *)((addr - MV78XX0_PCIE_IO_PHYS_BASE(0)) + + MV78XX0_PCIE_IO_VIRT_BASE(0)); +} + +#define __io(a) __io(a) +#define __mem_pci(a) (a) + + +#endif diff --git a/arch/arm/mach-mv78xx0/include/mach/irqs.h b/arch/arm/mach-mv78xx0/include/mach/irqs.h new file mode 100644 index 00000000..fa1d4221 --- /dev/null +++ b/arch/arm/mach-mv78xx0/include/mach/irqs.h @@ -0,0 +1,94 @@ +/* + * arch/arm/mach-mv78xx0/include/mach/irqs.h + * + * IRQ definitions for Marvell MV78xx0 SoCs + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H + +/* + * MV78xx0 Low Interrupt Controller + */ +#define IRQ_MV78XX0_ERR 0 +#define IRQ_MV78XX0_SPI 1 +#define IRQ_MV78XX0_I2C_0 2 +#define IRQ_MV78XX0_I2C_1 3 +#define IRQ_MV78XX0_IDMA_0 4 +#define IRQ_MV78XX0_IDMA_1 5 +#define IRQ_MV78XX0_IDMA_2 6 +#define IRQ_MV78XX0_IDMA_3 7 +#define IRQ_MV78XX0_TIMER_0 8 +#define IRQ_MV78XX0_TIMER_1 9 +#define IRQ_MV78XX0_TIMER_2 10 +#define IRQ_MV78XX0_TIMER_3 11 +#define IRQ_MV78XX0_UART_0 12 +#define IRQ_MV78XX0_UART_1 13 +#define IRQ_MV78XX0_UART_2 14 +#define IRQ_MV78XX0_UART_3 15 +#define IRQ_MV78XX0_USB_0 16 +#define IRQ_MV78XX0_USB_1 17 +#define IRQ_MV78XX0_USB_2 18 +#define IRQ_MV78XX0_CRYPTO 19 +#define IRQ_MV78XX0_SDIO_0 20 +#define IRQ_MV78XX0_SDIO_1 21 +#define IRQ_MV78XX0_XOR_0 22 +#define IRQ_MV78XX0_XOR_1 23 +#define IRQ_MV78XX0_I2S_0 24 +#define IRQ_MV78XX0_I2S_1 25 +#define IRQ_MV78XX0_SATA 26 +#define IRQ_MV78XX0_TDMI 27 + +/* + * MV78xx0 High Interrupt Controller + */ +#define IRQ_MV78XX0_PCIE_00 32 +#define IRQ_MV78XX0_PCIE_01 33 +#define IRQ_MV78XX0_PCIE_02 34 +#define IRQ_MV78XX0_PCIE_03 35 +#define IRQ_MV78XX0_PCIE_10 36 +#define IRQ_MV78XX0_PCIE_11 37 +#define IRQ_MV78XX0_PCIE_12 38 +#define IRQ_MV78XX0_PCIE_13 39 +#define IRQ_MV78XX0_GE00_SUM 40 +#define IRQ_MV78XX0_GE00_RX 41 +#define IRQ_MV78XX0_GE00_TX 42 +#define IRQ_MV78XX0_GE00_MISC 43 +#define IRQ_MV78XX0_GE01_SUM 44 +#define IRQ_MV78XX0_GE01_RX 45 +#define IRQ_MV78XX0_GE01_TX 46 +#define IRQ_MV78XX0_GE01_MISC 47 +#define IRQ_MV78XX0_GE10_SUM 48 +#define IRQ_MV78XX0_GE10_RX 49 +#define IRQ_MV78XX0_GE10_TX 50 +#define IRQ_MV78XX0_GE10_MISC 51 +#define IRQ_MV78XX0_GE11_SUM 52 +#define IRQ_MV78XX0_GE11_RX 53 +#define IRQ_MV78XX0_GE11_TX 54 +#define IRQ_MV78XX0_GE11_MISC 55 +#define IRQ_MV78XX0_GPIO_0_7 56 +#define IRQ_MV78XX0_GPIO_8_15 57 +#define IRQ_MV78XX0_GPIO_16_23 58 +#define IRQ_MV78XX0_GPIO_24_31 59 +#define IRQ_MV78XX0_DB_IN 60 +#define IRQ_MV78XX0_DB_OUT 61 + +/* + * MV78xx0 Error Interrupt Controller + */ +#define IRQ_MV78XX0_GE_ERR 70 + +/* + * MV78XX0 General Purpose Pins + */ +#define IRQ_MV78XX0_GPIO_START 96 +#define NR_GPIO_IRQS 32 + +#define NR_IRQS (IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS) + + +#endif diff --git a/arch/arm/mach-mv78xx0/include/mach/memory.h b/arch/arm/mach-mv78xx0/include/mach/memory.h new file mode 100644 index 00000000..a648c51f --- /dev/null +++ b/arch/arm/mach-mv78xx0/include/mach/memory.h @@ -0,0 +1,10 @@ +/* + * arch/arm/mach-mv78xx0/include/mach/memory.h + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#define PLAT_PHYS_OFFSET UL(0x00000000) + +#endif diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h new file mode 100644 index 00000000..36744971 --- /dev/null +++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h @@ -0,0 +1,121 @@ +/* + * arch/arm/mach-mv78xx0/include/mach/mv78xx0.h + * + * Generic definitions for Marvell MV78xx0 SoC flavors: + * MV781x0 and MV782x0. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_MV78XX0_H +#define __ASM_ARCH_MV78XX0_H + +/* + * Marvell MV78xx0 address maps. + * + * phys + * c0000000 PCIe Memory space + * f0800000 PCIe #0 I/O space + * f0900000 PCIe #1 I/O space + * f0a00000 PCIe #2 I/O space + * f0b00000 PCIe #3 I/O space + * f0c00000 PCIe #4 I/O space + * f0d00000 PCIe #5 I/O space + * f0e00000 PCIe #6 I/O space + * f0f00000 PCIe #7 I/O space + * f1000000 on-chip peripheral registers + * + * virt phys size + * fe400000 f102x000 16K core-specific peripheral registers + * fe700000 f0800000 1M PCIe #0 I/O space + * fe800000 f0900000 1M PCIe #1 I/O space + * fe900000 f0a00000 1M PCIe #2 I/O space + * fea00000 f0b00000 1M PCIe #3 I/O space + * feb00000 f0c00000 1M PCIe #4 I/O space + * fec00000 f0d00000 1M PCIe #5 I/O space + * fed00000 f0e00000 1M PCIe #6 I/O space + * fee00000 f0f00000 1M PCIe #7 I/O space + * fef00000 f1000000 1M on-chip peripheral registers + */ +#define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000 +#define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000 +#define MV78XX0_CORE_REGS_VIRT_BASE 0xfe400000 +#define MV78XX0_CORE_REGS_SIZE SZ_16K + +#define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20)) +#define MV78XX0_PCIE_IO_VIRT_BASE(i) (0xfe700000 + ((i) << 20)) +#define MV78XX0_PCIE_IO_SIZE SZ_1M + +#define MV78XX0_REGS_PHYS_BASE 0xf1000000 +#define MV78XX0_REGS_VIRT_BASE 0xfef00000 +#define MV78XX0_REGS_SIZE SZ_1M + +#define MV78XX0_PCIE_MEM_PHYS_BASE 0xc0000000 +#define MV78XX0_PCIE_MEM_SIZE 0x30000000 + +/* + * Core-specific peripheral registers. + */ +#define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE) + +/* + * Register Map + */ +#define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x00000) +#define DDR_WINDOW_CPU0_BASE (DDR_VIRT_BASE | 0x1500) +#define DDR_WINDOW_CPU1_BASE (DDR_VIRT_BASE | 0x1570) + +#define DEV_BUS_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x10000) +#define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x10000) +#define SAMPLE_AT_RESET_LOW (DEV_BUS_VIRT_BASE | 0x0030) +#define SAMPLE_AT_RESET_HIGH (DEV_BUS_VIRT_BASE | 0x0034) +#define GPIO_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x0100) +#define I2C_0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1000) +#define I2C_1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1100) +#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000) +#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000) +#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100) +#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) +#define UART2_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2200) +#define UART2_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2200) +#define UART3_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2300) +#define UART3_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2300) + +#define GE10_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x30000) +#define GE11_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x34000) + +#define PCIE00_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x40000) +#define PCIE01_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x44000) +#define PCIE02_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x48000) +#define PCIE03_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x4c000) + +#define USB0_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x50000) +#define USB1_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x51000) +#define USB2_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x52000) + +#define GE00_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x70000) +#define GE01_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x74000) + +#define PCIE10_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x80000) +#define PCIE11_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x84000) +#define PCIE12_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x88000) +#define PCIE13_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x8c000) + +#define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0xa0000) + +/* + * Supported devices and revisions. + */ +#define MV78X00_Z0_DEV_ID 0x6381 +#define MV78X00_REV_Z0 1 + +#define MV78100_DEV_ID 0x7810 +#define MV78100_REV_A0 1 +#define MV78100_REV_A1 2 + +#define MV78200_DEV_ID 0x7820 +#define MV78200_REV_A0 1 + +#endif diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h new file mode 100644 index 00000000..66e7ce4e --- /dev/null +++ b/arch/arm/mach-mv78xx0/include/mach/system.h @@ -0,0 +1,36 @@ +/* + * arch/arm/mach-mv78xx0/include/mach/system.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +#include <mach/bridge-regs.h> + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode, const char *cmd) +{ + /* + * Enable soft reset to assert RSTOUTn. + */ + writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); + + /* + * Assert soft reset. + */ + writel(SOFT_RESET, SYSTEM_SOFT_RESET); + + while (1) + ; +} + + +#endif diff --git a/arch/arm/mach-mv78xx0/include/mach/timex.h b/arch/arm/mach-mv78xx0/include/mach/timex.h new file mode 100644 index 00000000..0e8c443c --- /dev/null +++ b/arch/arm/mach-mv78xx0/include/mach/timex.h @@ -0,0 +1,9 @@ +/* + * arch/arm/mach-mv78xx0/include/mach/timex.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-mv78xx0/include/mach/uncompress.h b/arch/arm/mach-mv78xx0/include/mach/uncompress.h new file mode 100644 index 00000000..36526429 --- /dev/null +++ b/arch/arm/mach-mv78xx0/include/mach/uncompress.h @@ -0,0 +1,47 @@ +/* + * arch/arm/mach-mv78xx0/include/mach/uncompress.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/serial_reg.h> +#include <mach/mv78xx0.h> + +#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE) + +static void putc(const char c) +{ + unsigned char *base = SERIAL_BASE; + int i; + + for (i = 0; i < 0x1000; i++) { + if (base[UART_LSR << 2] & UART_LSR_THRE) + break; + barrier(); + } + + base[UART_TX << 2] = c; +} + +static void flush(void) +{ + unsigned char *base = SERIAL_BASE; + unsigned char mask; + int i; + + mask = UART_LSR_TEMT | UART_LSR_THRE; + + for (i = 0; i < 0x1000; i++) { + if ((base[UART_LSR << 2] & mask) == mask) + break; + barrier(); + } +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/arch/arm/mach-mv78xx0/include/mach/vmalloc.h b/arch/arm/mach-mv78xx0/include/mach/vmalloc.h new file mode 100644 index 00000000..ba26fe98 --- /dev/null +++ b/arch/arm/mach-mv78xx0/include/mach/vmalloc.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-mv78xx0/include/mach/vmalloc.h + */ + +#define VMALLOC_END 0xfe000000UL diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c new file mode 100644 index 00000000..3e24431b --- /dev/null +++ b/arch/arm/mach-mv78xx0/irq.c @@ -0,0 +1,45 @@ +/* + * arch/arm/mach-mv78xx0/irq.c + * + * MV78xx0 IRQ handling. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <asm/gpio.h> +#include <mach/bridge-regs.h> +#include <plat/irq.h> +#include "common.h" + +static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + BUG_ON(irq < IRQ_MV78XX0_GPIO_0_7 || irq > IRQ_MV78XX0_GPIO_24_31); + + orion_gpio_irq_handler((irq - IRQ_MV78XX0_GPIO_0_7) << 3); +} + +void __init mv78xx0_init_irq(void) +{ + orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)); + orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)); + orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF)); + + /* + * Initialize gpiolib for GPIOs 0-31. (The GPIO interrupt mask + * registers for core #1 are at an offset of 0x18 from those of + * core #0.) + */ + orion_gpio_init(0, 32, GPIO_VIRT_BASE, + mv78xx0_core_index() ? 0x18 : 0, + IRQ_MV78XX0_GPIO_START); + irq_set_chained_handler(IRQ_MV78XX0_GPIO_0_7, gpio_irq_handler); + irq_set_chained_handler(IRQ_MV78XX0_GPIO_8_15, gpio_irq_handler); + irq_set_chained_handler(IRQ_MV78XX0_GPIO_16_23, gpio_irq_handler); + irq_set_chained_handler(IRQ_MV78XX0_GPIO_24_31, gpio_irq_handler); +} diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c new file mode 100644 index 00000000..59b7686b --- /dev/null +++ b/arch/arm/mach-mv78xx0/mpp.c @@ -0,0 +1,39 @@ +/* + * arch/arm/mach-mv78x00/mpp.c + * + * MPP functions for Marvell MV78x00 SoCs + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mbus.h> +#include <linux/io.h> +#include <plat/mpp.h> +#include <asm/gpio.h> +#include <mach/hardware.h> +#include "common.h" +#include "mpp.h" + +static unsigned int __init mv78xx0_variant(void) +{ + u32 dev, rev; + + mv78xx0_pcie_id(&dev, &rev); + + if (dev == MV78100_DEV_ID && rev >= MV78100_REV_A0) + return MPP_78100_A0_MASK; + + printk(KERN_ERR "MPP setup: unknown mv78x00 variant " + "(dev %#x rev %#x)\n", dev, rev); + return 0; +} + +void __init mv78xx0_mpp_conf(unsigned int *mpp_list) +{ + orion_mpp_conf(mpp_list, mv78xx0_variant(), + MPP_MAX, DEV_BUS_VIRT_BASE); +} diff --git a/arch/arm/mach-mv78xx0/mpp.h b/arch/arm/mach-mv78xx0/mpp.h new file mode 100644 index 00000000..3752302a --- /dev/null +++ b/arch/arm/mach-mv78xx0/mpp.h @@ -0,0 +1,341 @@ +/* + * linux/arch/arm/mach-mv78xx0/mpp.h -- Multi Purpose Pins + * + * + * sebastien requiem <sebastien@requiem.fr> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MV78X00_MPP_H +#define __MV78X00_MPP_H + +#define MPP(_num, _sel, _in, _out, _78100_A0) (\ + /* MPP number */ ((_num) & 0xff) | \ + /* MPP select value */ (((_sel) & 0xf) << 8) | \ + /* may be input signal */ ((!!(_in)) << 12) | \ + /* may be output signal */ ((!!(_out)) << 13) | \ + /* available on A0 */ ((!!(_78100_A0)) << 14)) + + /* num sel i o 78100_A0 */ + +#define MPP_78100_A0_MASK MPP(0, 0x0, 0, 0, 1) + +#define MPP0_GPIO MPP(0, 0x0, 1, 1, 1) +#define MPP0_GE0_COL MPP(0, 0x1, 0, 0, 1) +#define MPP0_GE1_TXCLK MPP(0, 0x2, 0, 0, 1) +#define MPP0_UNUSED MPP(0, 0x3, 0, 0, 1) + +#define MPP1_GPIO MPP(1, 0x0, 1, 1, 1) +#define MPP1_GE0_RXERR MPP(1, 0x1, 0, 0, 1) +#define MPP1_GE1_TXCTL MPP(1, 0x2, 0, 0, 1) +#define MPP1_UNUSED MPP(1, 0x3, 0, 0, 1) + +#define MPP2_GPIO MPP(2, 0x0, 1, 1, 1) +#define MPP2_GE0_CRS MPP(2, 0x1, 0, 0, 1) +#define MPP2_GE1_RXCTL MPP(2, 0x2, 0, 0, 1) +#define MPP2_UNUSED MPP(2, 0x3, 0, 0, 1) + +#define MPP3_GPIO MPP(3, 0x0, 1, 1, 1) +#define MPP3_GE0_TXERR MPP(3, 0x1, 0, 0, 1) +#define MPP3_GE1_RXCLK MPP(3, 0x2, 0, 0, 1) +#define MPP3_UNUSED MPP(3, 0x3, 0, 0, 1) + +#define MPP4_GPIO MPP(4, 0x0, 1, 1, 1) +#define MPP4_GE0_TXD4 MPP(4, 0x1, 0, 0, 1) +#define MPP4_GE1_TXD0 MPP(4, 0x2, 0, 0, 1) +#define MPP4_UNUSED MPP(4, 0x3, 0, 0, 1) + +#define MPP5_GPIO MPP(5, 0x0, 1, 1, 1) +#define MPP5_GE0_TXD5 MPP(5, 0x1, 0, 0, 1) +#define MPP5_GE1_TXD1 MPP(5, 0x2, 0, 0, 1) +#define MPP5_UNUSED MPP(5, 0x3, 0, 0, 1) + +#define MPP6_GPIO MPP(6, 0x0, 1, 1, 1) +#define MPP6_GE0_TXD6 MPP(6, 0x1, 0, 0, 1) +#define MPP6_GE1_TXD2 MPP(6, 0x2, 0, 0, 1) +#define MPP6_UNUSED MPP(6, 0x3, 0, 0, 1) + +#define MPP7_GPIO MPP(7, 0x0, 1, 1, 1) +#define MPP7_GE0_TXD7 MPP(7, 0x1, 0, 0, 1) +#define MPP7_GE1_TXD3 MPP(7, 0x2, 0, 0, 1) +#define MPP7_UNUSED MPP(7, 0x3, 0, 0, 1) + +#define MPP8_GPIO MPP(8, 0x0, 1, 1, 1) +#define MPP8_GE0_RXD4 MPP(8, 0x1, 0, 0, 1) +#define MPP8_GE1_RXD0 MPP(8, 0x2, 0, 0, 1) +#define MPP8_UNUSED MPP(8, 0x3, 0, 0, 1) + +#define MPP9_GPIO MPP(9, 0x0, 1, 1, 1) +#define MPP9_GE0_RXD5 MPP(9, 0x1, 0, 0, 1) +#define MPP9_GE1_RXD1 MPP(9, 0x2, 0, 0, 1) +#define MPP9_UNUSED MPP(9, 0x3, 0, 0, 1) + +#define MPP10_GPIO MPP(10, 0x0, 1, 1, 1) +#define MPP10_GE0_RXD6 MPP(10, 0x1, 0, 0, 1) +#define MPP10_GE1_RXD2 MPP(10, 0x2, 0, 0, 1) +#define MPP10_UNUSED MPP(10, 0x3, 0, 0, 1) + +#define MPP11_GPIO MPP(11, 0x0, 1, 1, 1) +#define MPP11_GE0_RXD7 MPP(11, 0x1, 0, 0, 1) +#define MPP11_GE1_RXD3 MPP(11, 0x2, 0, 0, 1) +#define MPP11_UNUSED MPP(11, 0x3, 0, 0, 1) + +#define MPP12_GPIO MPP(12, 0x0, 1, 1, 1) +#define MPP12_M_BB MPP(12, 0x3, 0, 0, 1) +#define MPP12_UA0_CTSn MPP(12, 0x4, 0, 0, 1) +#define MPP12_NAND_FLASH_REn0 MPP(12, 0x5, 0, 0, 1) +#define MPP12_TDM0_SCSn MPP(12, 0X6, 0, 0, 1) +#define MPP12_UNUSED MPP(12, 0x1, 0, 0, 1) + +#define MPP13_GPIO MPP(13, 0x0, 1, 1, 1) +#define MPP13_SYSRST_OUTn MPP(13, 0x3, 0, 0, 1) +#define MPP13_UA0_RTSn MPP(13, 0x4, 0, 0, 1) +#define MPP13_NAN_FLASH_WEn0 MPP(13, 0x5, 0, 0, 1) +#define MPP13_TDM_SCLK MPP(13, 0x6, 0, 0, 1) +#define MPP13_UNUSED MPP(13, 0x1, 0, 0, 1) + +#define MPP14_GPIO MPP(14, 0x0, 1, 1, 1) +#define MPP14_SATA1_ACTn MPP(14, 0x3, 0, 0, 1) +#define MPP14_UA1_CTSn MPP(14, 0x4, 0, 0, 1) +#define MPP14_NAND_FLASH_REn1 MPP(14, 0x5, 0, 0, 1) +#define MPP14_TDM_SMOSI MPP(14, 0x6, 0, 0, 1) +#define MPP14_UNUSED MPP(14, 0x1, 0, 0, 1) + +#define MPP15_GPIO MPP(15, 0x0, 1, 1, 1) +#define MPP15_SATA0_ACTn MPP(15, 0x3, 0, 0, 1) +#define MPP15_UA1_RTSn MPP(15, 0x4, 0, 0, 1) +#define MPP15_NAND_FLASH_WEn1 MPP(15, 0x5, 0, 0, 1) +#define MPP15_TDM_SMISO MPP(15, 0x6, 0, 0, 1) +#define MPP15_UNUSED MPP(15, 0x1, 0, 0, 1) + +#define MPP16_GPIO MPP(16, 0x0, 1, 1, 1) +#define MPP16_SATA1_PRESENTn MPP(16, 0x3, 0, 0, 1) +#define MPP16_UA2_TXD MPP(16, 0x4, 0, 0, 1) +#define MPP16_NAND_FLASH_REn3 MPP(16, 0x5, 0, 0, 1) +#define MPP16_TDM_INTn MPP(16, 0x6, 0, 0, 1) +#define MPP16_UNUSED MPP(16, 0x1, 0, 0, 1) + + +#define MPP17_GPIO MPP(17, 0x0, 1, 1, 1) +#define MPP17_SATA0_PRESENTn MPP(17, 0x3, 0, 0, 1) +#define MPP17_UA2_RXD MPP(17, 0x4, 0, 0, 1) +#define MPP17_NAND_FLASH_WEn3 MPP(17, 0x5, 0, 0, 1) +#define MPP17_TDM_RSTn MPP(17, 0x6, 0, 0, 1) +#define MPP17_UNUSED MPP(17, 0x1, 0, 0, 1) + + +#define MPP18_GPIO MPP(18, 0x0, 1, 1, 1) +#define MPP18_UA0_CTSn MPP(18, 0x4, 0, 0, 1) +#define MPP18_BOOT_FLASH_REn MPP(18, 0x5, 0, 0, 1) +#define MPP18_UNUSED MPP(18, 0x1, 0, 0, 1) + + + +#define MPP19_GPIO MPP(19, 0x0, 1, 1, 1) +#define MPP19_UA0_CTSn MPP(19, 0x4, 0, 0, 1) +#define MPP19_BOOT_FLASH_WEn MPP(19, 0x5, 0, 0, 1) +#define MPP19_UNUSED MPP(19, 0x1, 0, 0, 1) + + +#define MPP20_GPIO MPP(20, 0x0, 1, 1, 1) +#define MPP20_UA1_CTSs MPP(20, 0x4, 0, 0, 1) +#define MPP20_TDM_PCLK MPP(20, 0x6, 0, 0, 0) +#define MPP20_UNUSED MPP(20, 0x1, 0, 0, 1) + + + +#define MPP21_GPIO MPP(21, 0x0, 1, 1, 1) +#define MPP21_UA1_CTSs MPP(21, 0x4, 0, 0, 1) +#define MPP21_TDM_FSYNC MPP(21, 0x6, 0, 0, 0) +#define MPP21_UNUSED MPP(21, 0x1, 0, 0, 1) + + + +#define MPP22_GPIO MPP(22, 0x0, 1, 1, 1) +#define MPP22_UA3_TDX MPP(22, 0x4, 0, 0, 1) +#define MPP22_NAND_FLASH_REn2 MPP(22, 0x5, 0, 0, 1) +#define MPP22_TDM_DRX MPP(22, 0x6, 0, 0, 1) +#define MPP22_UNUSED MPP(22, 0x1, 0, 0, 1) + + + +#define MPP23_GPIO MPP(23, 0x0, 1, 1, 1) +#define MPP23_UA3_RDX MPP(23, 0x4, 0, 0, 1) +#define MPP23_NAND_FLASH_WEn2 MPP(23, 0x5, 0, 0, 1) +#define MPP23_TDM_DTX MPP(23, 0x6, 0, 0, 1) +#define MPP23_UNUSED MPP(23, 0x1, 0, 0, 1) + + +#define MPP24_GPIO MPP(24, 0x0, 1, 1, 1) +#define MPP24_UA2_TXD MPP(24, 0x4, 0, 0, 1) +#define MPP24_TDM_INTn MPP(24, 0x6, 0, 0, 1) +#define MPP24_UNUSED MPP(24, 0x1, 0, 0, 1) + + +#define MPP25_GPIO MPP(25, 0x0, 1, 1, 1) +#define MPP25_UA2_RXD MPP(25, 0x4, 0, 0, 1) +#define MPP25_TDM_RSTn MPP(25, 0x6, 0, 0, 1) +#define MPP25_UNUSED MPP(25, 0x1, 0, 0, 1) + + +#define MPP26_GPIO MPP(26, 0x0, 1, 1, 1) +#define MPP26_UA2_CTSn MPP(26, 0x4, 0, 0, 1) +#define MPP26_TDM_PCLK MPP(26, 0x6, 0, 0, 1) +#define MPP26_UNUSED MPP(26, 0x1, 0, 0, 1) + + +#define MPP27_GPIO MPP(27, 0x0, 1, 1, 1) +#define MPP27_UA2_RTSn MPP(27, 0x4, 0, 0, 1) +#define MPP27_TDM_FSYNC MPP(27, 0x6, 0, 0, 1) +#define MPP27_UNUSED MPP(27, 0x1, 0, 0, 1) + + +#define MPP28_GPIO MPP(28, 0x0, 1, 1, 1) +#define MPP28_UA3_TXD MPP(28, 0x4, 0, 0, 1) +#define MPP28_TDM_DRX MPP(28, 0x6, 0, 0, 1) +#define MPP28_UNUSED MPP(28, 0x1, 0, 0, 1) + +#define MPP29_GPIO MPP(29, 0x0, 1, 1, 1) +#define MPP29_UA3_RXD MPP(29, 0x4, 0, 0, 1) +#define MPP29_SYSRST_OUTn MPP(29, 0x5, 0, 0, 1) +#define MPP29_TDM_DTX MPP(29, 0x6, 0, 0, 1) +#define MPP29_UNUSED MPP(29, 0x1, 0, 0, 1) + +#define MPP30_GPIO MPP(30, 0x0, 1, 1, 1) +#define MPP30_UA3_CTSn MPP(30, 0x4, 0, 0, 1) +#define MPP30_UNUSED MPP(30, 0x1, 0, 0, 1) + +#define MPP31_GPIO MPP(31, 0x0, 1, 1, 1) +#define MPP31_UA3_RTSn MPP(31, 0x4, 0, 0, 1) +#define MPP31_TDM1_SCSn MPP(31, 0x6, 0, 0, 1) +#define MPP31_UNUSED MPP(31, 0x1, 0, 0, 1) + + +#define MPP32_GPIO MPP(32, 0x1, 1, 1, 1) +#define MPP32_UA3_TDX MPP(32, 0x4, 0, 0, 1) +#define MPP32_SYSRST_OUTn MPP(32, 0x5, 0, 0, 1) +#define MPP32_TDM0_RXQ MPP(32, 0x6, 0, 0, 1) +#define MPP32_UNUSED MPP(32, 0x3, 0, 0, 1) + + +#define MPP33_GPIO MPP(33, 0x1, 1, 1, 1) +#define MPP33_UA3_RDX MPP(33, 0x4, 0, 0, 1) +#define MPP33_TDM0_TXQ MPP(33, 0x6, 0, 0, 1) +#define MPP33_UNUSED MPP(33, 0x3, 0, 0, 1) + + + +#define MPP34_GPIO MPP(34, 0x1, 1, 1, 1) +#define MPP34_UA2_TDX MPP(34, 0x4, 0, 0, 1) +#define MPP34_TDM1_RXQ MPP(34, 0x6, 0, 0, 1) +#define MPP34_UNUSED MPP(34, 0x3, 0, 0, 1) + + + +#define MPP35_GPIO MPP(35, 0x1, 1, 1, 1) +#define MPP35_UA2_RDX MPP(35, 0x4, 0, 0, 1) +#define MPP35_TDM1_TXQ MPP(35, 0x6, 0, 0, 1) +#define MPP35_UNUSED MPP(35, 0x3, 0, 0, 1) + +#define MPP36_GPIO MPP(36, 0x1, 1, 1, 1) +#define MPP36_UA0_CTSn MPP(36, 0x2, 0, 0, 1) +#define MPP36_UA2_TDX MPP(36, 0x4, 0, 0, 1) +#define MPP36_TDM0_SCSn MPP(36, 0x6, 0, 0, 1) +#define MPP36_UNUSED MPP(36, 0x3, 0, 0, 1) + + +#define MPP37_GPIO MPP(37, 0x1, 1, 1, 1) +#define MPP37_UA0_RTSn MPP(37, 0x2, 0, 0, 1) +#define MPP37_UA2_RXD MPP(37, 0x4, 0, 0, 1) +#define MPP37_SYSRST_OUTn MPP(37, 0x5, 0, 0, 1) +#define MPP37_TDM_SCLK MPP(37, 0x6, 0, 0, 1) +#define MPP37_UNUSED MPP(37, 0x3, 0, 0, 1) + + + + +#define MPP38_GPIO MPP(38, 0x1, 1, 1, 1) +#define MPP38_UA1_CTSn MPP(38, 0x2, 0, 0, 1) +#define MPP38_UA3_TXD MPP(38, 0x4, 0, 0, 1) +#define MPP38_SYSRST_OUTn MPP(38, 0x5, 0, 0, 1) +#define MPP38_TDM_SMOSI MPP(38, 0x6, 0, 0, 1) +#define MPP38_UNUSED MPP(38, 0x3, 0, 0, 1) + + + + +#define MPP39_GPIO MPP(39, 0x1, 1, 1, 1) +#define MPP39_UA1_RTSn MPP(39, 0x2, 0, 0, 1) +#define MPP39_UA3_RXD MPP(39, 0x4, 0, 0, 1) +#define MPP39_SYSRST_OUTn MPP(39, 0x5, 0, 0, 1) +#define MPP39_TDM_SMISO MPP(39, 0x6, 0, 0, 1) +#define MPP39_UNUSED MPP(39, 0x3, 0, 0, 1) + + + +#define MPP40_GPIO MPP(40, 0x1, 1, 1, 1) +#define MPP40_TDM_INTn MPP(40, 0x6, 0, 0, 1) +#define MPP40_UNUSED MPP(40, 0x0, 0, 0, 1) + + + +#define MPP41_GPIO MPP(41, 0x1, 1, 1, 1) +#define MPP41_TDM_RSTn MPP(41, 0x6, 0, 0, 1) +#define MPP41_UNUSED MPP(41, 0x0, 0, 0, 1) + + + +#define MPP42_GPIO MPP(42, 0x1, 1, 1, 1) +#define MPP42_TDM_PCLK MPP(42, 0x6, 0, 0, 1) +#define MPP42_UNUSED MPP(42, 0x0, 0, 0, 1) + + + +#define MPP43_GPIO MPP(43, 0x1, 1, 1, 1) +#define MPP43_TDM_FSYNC MPP(43, 0x6, 0, 0, 1) +#define MPP43_UNUSED MPP(43, 0x0, 0, 0, 1) + + + +#define MPP44_GPIO MPP(44, 0x1, 1, 1, 1) +#define MPP44_TDM_DRX MPP(44, 0x6, 0, 0, 1) +#define MPP44_UNUSED MPP(44, 0x0, 0, 0, 1) + + + +#define MPP45_GPIO MPP(45, 0x1, 1, 1, 1) +#define MPP45_SATA0_ACTn MPP(45, 0x3, 0, 0, 1) +#define MPP45_TDM_DRX MPP(45, 0x6, 0, 0, 1) +#define MPP45_UNUSED MPP(45, 0x0, 0, 0, 1) + + +#define MPP46_GPIO MPP(46, 0x1, 1, 1, 1) +#define MPP46_TDM_SCSn MPP(46, 0x6, 0, 0, 1) +#define MPP46_UNUSED MPP(46, 0x0, 0, 0, 1) + + +#define MPP47_GPIO MPP(47, 0x1, 1, 1, 1) +#define MPP47_UNUSED MPP(47, 0x0, 0, 0, 1) + + + +#define MPP48_GPIO MPP(48, 0x1, 1, 1, 1) +#define MPP48_SATA1_ACTn MPP(48, 0x3, 0, 0, 1) +#define MPP48_UNUSED MPP(48, 0x2, 0, 0, 1) + + + +#define MPP49_GPIO MPP(49, 0x1, 1, 1, 1) +#define MPP49_SATA0_ACTn MPP(49, 0x3, 0, 0, 1) +#define MPP49_M_BB MPP(49, 0x4, 0, 0, 1) +#define MPP49_UNUSED MPP(49, 0x2, 0, 0, 1) + + +#define MPP_MAX 49 + +void mv78xx0_mpp_conf(unsigned int *mpp_list); + +#endif diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c new file mode 100644 index 00000000..a560439d --- /dev/null +++ b/arch/arm/mach-mv78xx0/pcie.c @@ -0,0 +1,319 @@ +/* + * arch/arm/mach-mv78xx0/pcie.c + * + * PCIe functions for Marvell MV78xx0 SoCs + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/mbus.h> +#include <asm/irq.h> +#include <asm/mach/pci.h> +#include <plat/pcie.h> +#include "common.h" + +struct pcie_port { + u8 maj; + u8 min; + u8 root_bus_nr; + void __iomem *base; + spinlock_t conf_lock; + char io_space_name[16]; + char mem_space_name[16]; + struct resource res[2]; +}; + +static struct pcie_port pcie_port[8]; +static int num_pcie_ports; +static struct resource pcie_io_space; +static struct resource pcie_mem_space; + + +void __init mv78xx0_pcie_id(u32 *dev, u32 *rev) +{ + *dev = orion_pcie_dev_id((void __iomem *)PCIE00_VIRT_BASE); + *rev = orion_pcie_rev((void __iomem *)PCIE00_VIRT_BASE); +} + +static void __init mv78xx0_pcie_preinit(void) +{ + int i; + u32 size_each; + u32 start; + int win; + + pcie_io_space.name = "PCIe I/O Space"; + pcie_io_space.start = MV78XX0_PCIE_IO_PHYS_BASE(0); + pcie_io_space.end = + MV78XX0_PCIE_IO_PHYS_BASE(0) + MV78XX0_PCIE_IO_SIZE * 8 - 1; + pcie_io_space.flags = IORESOURCE_IO; + if (request_resource(&iomem_resource, &pcie_io_space)) + panic("can't allocate PCIe I/O space"); + + pcie_mem_space.name = "PCIe MEM Space"; + pcie_mem_space.start = MV78XX0_PCIE_MEM_PHYS_BASE; + pcie_mem_space.end = + MV78XX0_PCIE_MEM_PHYS_BASE + MV78XX0_PCIE_MEM_SIZE - 1; + pcie_mem_space.flags = IORESOURCE_MEM; + if (request_resource(&iomem_resource, &pcie_mem_space)) + panic("can't allocate PCIe MEM space"); + + for (i = 0; i < num_pcie_ports; i++) { + struct pcie_port *pp = pcie_port + i; + + snprintf(pp->io_space_name, sizeof(pp->io_space_name), + "PCIe %d.%d I/O", pp->maj, pp->min); + pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0; + pp->res[0].name = pp->io_space_name; + pp->res[0].start = MV78XX0_PCIE_IO_PHYS_BASE(i); + pp->res[0].end = pp->res[0].start + MV78XX0_PCIE_IO_SIZE - 1; + pp->res[0].flags = IORESOURCE_IO; + + snprintf(pp->mem_space_name, sizeof(pp->mem_space_name), + "PCIe %d.%d MEM", pp->maj, pp->min); + pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0; + pp->res[1].name = pp->mem_space_name; + pp->res[1].flags = IORESOURCE_MEM; + } + + switch (num_pcie_ports) { + case 0: + size_each = 0; + break; + + case 1: + size_each = 0x30000000; + break; + + case 2 ... 3: + size_each = 0x10000000; + break; + + case 4 ... 6: + size_each = 0x08000000; + break; + + case 7: + size_each = 0x04000000; + break; + + default: + panic("invalid number of PCIe ports"); + } + + start = MV78XX0_PCIE_MEM_PHYS_BASE; + for (i = 0; i < num_pcie_ports; i++) { + struct pcie_port *pp = pcie_port + i; + + pp->res[1].start = start; + pp->res[1].end = start + size_each - 1; + start += size_each; + } + + for (i = 0; i < num_pcie_ports; i++) { + struct pcie_port *pp = pcie_port + i; + + if (request_resource(&pcie_io_space, &pp->res[0])) + panic("can't allocate PCIe I/O sub-space"); + + if (request_resource(&pcie_mem_space, &pp->res[1])) + panic("can't allocate PCIe MEM sub-space"); + } + + win = 0; + for (i = 0; i < num_pcie_ports; i++) { + struct pcie_port *pp = pcie_port + i; + + mv78xx0_setup_pcie_io_win(win++, pp->res[0].start, + pp->res[0].end - pp->res[0].start + 1, + pp->maj, pp->min); + + mv78xx0_setup_pcie_mem_win(win++, pp->res[1].start, + pp->res[1].end - pp->res[1].start + 1, + pp->maj, pp->min); + } +} + +static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys) +{ + struct pcie_port *pp; + + if (nr >= num_pcie_ports) + return 0; + + pp = &pcie_port[nr]; + pp->root_bus_nr = sys->busnr; + + /* + * Generic PCIe unit setup. + */ + orion_pcie_set_local_bus_nr(pp->base, sys->busnr); + orion_pcie_setup(pp->base, &mv78xx0_mbus_dram_info); + + sys->resource[0] = &pp->res[0]; + sys->resource[1] = &pp->res[1]; + sys->resource[2] = NULL; + + return 1; +} + +static struct pcie_port *bus_to_port(int bus) +{ + int i; + + for (i = num_pcie_ports - 1; i >= 0; i--) { + int rbus = pcie_port[i].root_bus_nr; + if (rbus != -1 && rbus <= bus) + break; + } + + return i >= 0 ? pcie_port + i : NULL; +} + +static int pcie_valid_config(struct pcie_port *pp, int bus, int dev) +{ + /* + * Don't go out when trying to access nonexisting devices + * on the local bus. + */ + if (bus == pp->root_bus_nr && dev > 1) + return 0; + + return 1; +} + +static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, + int size, u32 *val) +{ + struct pcie_port *pp = bus_to_port(bus->number); + unsigned long flags; + int ret; + + if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + spin_lock_irqsave(&pp->conf_lock, flags); + ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val); + spin_unlock_irqrestore(&pp->conf_lock, flags); + + return ret; +} + +static int pcie_wr_conf(struct pci_bus *bus, u32 devfn, + int where, int size, u32 val) +{ + struct pcie_port *pp = bus_to_port(bus->number); + unsigned long flags; + int ret; + + if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + spin_lock_irqsave(&pp->conf_lock, flags); + ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val); + spin_unlock_irqrestore(&pp->conf_lock, flags); + + return ret; +} + +static struct pci_ops pcie_ops = { + .read = pcie_rd_conf, + .write = pcie_wr_conf, +}; + +static void __devinit rc_pci_fixup(struct pci_dev *dev) +{ + /* + * Prevent enumeration of root complex. + */ + if (dev->bus->parent == NULL && dev->devfn == 0) { + int i; + + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + dev->resource[i].start = 0; + dev->resource[i].end = 0; + dev->resource[i].flags = 0; + } + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup); + +static struct pci_bus __init * +mv78xx0_pcie_scan_bus(int nr, struct pci_sys_data *sys) +{ + struct pci_bus *bus; + + if (nr < num_pcie_ports) { + bus = pci_scan_bus(sys->busnr, &pcie_ops, sys); + } else { + bus = NULL; + BUG(); + } + + return bus; +} + +static int __init mv78xx0_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + struct pcie_port *pp = bus_to_port(dev->bus->number); + + return IRQ_MV78XX0_PCIE_00 + (pp->maj << 2) + pp->min; +} + +static struct hw_pci mv78xx0_pci __initdata = { + .nr_controllers = 8, + .preinit = mv78xx0_pcie_preinit, + .swizzle = pci_std_swizzle, + .setup = mv78xx0_pcie_setup, + .scan = mv78xx0_pcie_scan_bus, + .map_irq = mv78xx0_pcie_map_irq, +}; + +static void __init add_pcie_port(int maj, int min, unsigned long base) +{ + printk(KERN_INFO "MV78xx0 PCIe port %d.%d: ", maj, min); + + if (orion_pcie_link_up((void __iomem *)base)) { + struct pcie_port *pp = &pcie_port[num_pcie_ports++]; + + printk("link up\n"); + + pp->maj = maj; + pp->min = min; + pp->root_bus_nr = -1; + pp->base = (void __iomem *)base; + spin_lock_init(&pp->conf_lock); + memset(pp->res, 0, sizeof(pp->res)); + } else { + printk("link down, ignoring\n"); + } +} + +void __init mv78xx0_pcie_init(int init_port0, int init_port1) +{ + if (init_port0) { + add_pcie_port(0, 0, PCIE00_VIRT_BASE); + if (!orion_pcie_x4_mode((void __iomem *)PCIE00_VIRT_BASE)) { + add_pcie_port(0, 1, PCIE01_VIRT_BASE); + add_pcie_port(0, 2, PCIE02_VIRT_BASE); + add_pcie_port(0, 3, PCIE03_VIRT_BASE); + } + } + + if (init_port1) { + add_pcie_port(1, 0, PCIE10_VIRT_BASE); + if (!orion_pcie_x4_mode((void __iomem *)PCIE10_VIRT_BASE)) { + add_pcie_port(1, 1, PCIE11_VIRT_BASE); + add_pcie_port(1, 2, PCIE12_VIRT_BASE); + add_pcie_port(1, 3, PCIE13_VIRT_BASE); + } + } + + pci_common_init(&mv78xx0_pci); +} diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c new file mode 100644 index 00000000..d927f14c --- /dev/null +++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c @@ -0,0 +1,87 @@ +/* + * arch/arm/mach-mv78x00/rd78x00-masa-setup.c + * + * Marvell RD-78x00-mASA Development Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/ethtool.h> +#include <mach/mv78xx0.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include "common.h" + +static struct mv643xx_eth_platform_data rd78x00_masa_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static struct mv643xx_eth_platform_data rd78x00_masa_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(9), +}; + +static struct mv643xx_eth_platform_data rd78x00_masa_ge10_data = { +}; + +static struct mv643xx_eth_platform_data rd78x00_masa_ge11_data = { +}; + +static struct mv_sata_platform_data rd78x00_masa_sata_data = { + .n_ports = 2, +}; + +static void __init rd78x00_masa_init(void) +{ + /* + * Basic MV78x00 setup. Needs to be called early. + */ + mv78xx0_init(); + + /* + * Partition on-chip peripherals between the two CPU cores. + */ + if (mv78xx0_core_index() == 0) { + mv78xx0_ehci0_init(); + mv78xx0_ehci1_init(); + mv78xx0_ge00_init(&rd78x00_masa_ge00_data); + mv78xx0_ge10_init(&rd78x00_masa_ge10_data); + mv78xx0_sata_init(&rd78x00_masa_sata_data); + mv78xx0_uart0_init(); + mv78xx0_uart2_init(); + } else { + mv78xx0_ehci2_init(); + mv78xx0_ge01_init(&rd78x00_masa_ge01_data); + mv78xx0_ge11_init(&rd78x00_masa_ge11_data); + mv78xx0_uart1_init(); + mv78xx0_uart3_init(); + } +} + +static int __init rd78x00_pci_init(void) +{ + /* + * Assign all PCIe devices to CPU core #0. + */ + if (machine_is_rd78x00_masa() && mv78xx0_core_index() == 0) + mv78xx0_pcie_init(1, 1); + + return 0; +} +subsys_initcall(rd78x00_pci_init); + +MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board") + /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ + .boot_params = 0x00000100, + .init_machine = rd78x00_masa_init, + .map_io = mv78xx0_map_io, + .init_early = mv78xx0_init_early, + .init_irq = mv78xx0_init_irq, + .timer = &mv78xx0_timer, +MACHINE_END |