1 files changed, 288 insertions, 0 deletions
diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c
new file mode 100644
index 00000000..563819a8
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/pci.c
@@ -0,0 +1,288 @@
+/*
+ * arch/arm/mach-ixp23xx/pci.c
+ *
+ * PCI routines for IXP23XX based systems
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ * based on original code:
+ *
+ * Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Copyright 2002-2005 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/sizes.h>
+#include <asm/system.h>
+#include <asm/mach/pci.h>
+#include <mach/hardware.h>
+
+extern int (*external_fault) (unsigned long, struct pt_regs *);
+
+static volatile int pci_master_aborts = 0;
+
+#ifdef DEBUG
+#define DBG(x...)	printk(x)
+#else
+#define DBG(x...)
+#endif
+
+int clear_master_aborts(void);
+
+static u32
+*ixp23xx_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where)
+{
+	u32 *paddress;
+
+	/*
+	 * Must be dword aligned
+	 */
+	where &= ~3;
+
+	/*
+	 * For top bus, generate type 0, else type 1
+	 */
+	if (!bus_nr) {
+		if (PCI_SLOT(devfn) >= 8)
+			return 0;
+
+		paddress = (u32 *) (IXP23XX_PCI_CFG0_VIRT
+				    | (1 << (PCI_SLOT(devfn) + 16))
+				    | (PCI_FUNC(devfn) << 8) | where);
+	} else {
+		paddress = (u32 *) (IXP23XX_PCI_CFG1_VIRT
+				    | (bus_nr << 16)
+				    | (PCI_SLOT(devfn) << 11)
+				    | (PCI_FUNC(devfn) << 8) | where);
+	}
+
+	return paddress;
+}
+
+/*
+ * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
+ * 0 and 3 are not valid indexes...
+ */
+static u32 bytemask[] = {
+	/*0*/	0,
+	/*1*/	0xff,
+	/*2*/	0xffff,
+	/*3*/	0,
+	/*4*/	0xffffffff,
+};
+
+static int ixp23xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+				int where, int size, u32 *value)
+{
+	u32 n;
+	u32 *addr;
+
+	n = where % 4;
+
+	DBG("In config_read(%d) %d from dev %d:%d:%d\n", size, where,
+		bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
+
+	addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
+	if (!addr)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	pci_master_aborts = 0;
+	*value = (*addr >> (8*n)) & bytemask[size];
+	if (pci_master_aborts) {
+			pci_master_aborts = 0;
+			*value = 0xffffffff;
+			return PCIBIOS_DEVICE_NOT_FOUND;
+		}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+/*
+ * We don't do error checking on the address for writes.
+ * It's assumed that the user checked for the device existing first
+ * by doing a read first.
+ */
+static int ixp23xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+					int where, int size, u32 value)
+{
+	u32 mask;
+	u32 *addr;
+	u32 temp;
+
+	mask = ~(bytemask[size] << ((where % 0x4) * 8));
+	addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
+	if (!addr)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	temp = (u32) (value) << ((where % 0x4) * 8);
+	*addr = (*addr & mask) | temp;
+
+	clear_master_aborts();
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops ixp23xx_pci_ops = {
+	.read	= ixp23xx_pci_read_config,
+	.write	= ixp23xx_pci_write_config,
+};
+
+struct pci_bus *ixp23xx_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
+{
+	return pci_scan_bus(sysdata->busnr, &ixp23xx_pci_ops, sysdata);
+}
+
+int ixp23xx_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+	volatile unsigned long temp;
+	unsigned long flags;
+
+	pci_master_aborts = 1;
+
+	local_irq_save(flags);
+	temp = *IXP23XX_PCI_CONTROL;
+
+	/*
+	 * master abort and cmd tgt err
+	 */
+	if (temp & ((1 << 8) | (1 << 5)))
+		*IXP23XX_PCI_CONTROL = temp;
+
+	temp = *IXP23XX_PCI_CMDSTAT;
+
+	if (temp & (1 << 29))
+		*IXP23XX_PCI_CMDSTAT = temp;
+	local_irq_restore(flags);
+
+	/*
+	 * If it was an imprecise abort, then we need to correct the
+	 * return address to be _after_ the instruction.
+	 */
+	if (fsr & (1 << 10))
+		regs->ARM_pc += 4;
+
+	return 0;
+}
+
+int clear_master_aborts(void)
+{
+	volatile u32 temp;
+
+	temp = *IXP23XX_PCI_CONTROL;
+
+	/*
+	 * master abort and cmd tgt err
+	 */
+	if (temp & ((1 << 8) | (1 << 5)))
+		*IXP23XX_PCI_CONTROL = temp;
+
+	temp = *IXP23XX_PCI_CMDSTAT;
+
+	if (temp & (1 << 29))
+		*IXP23XX_PCI_CMDSTAT = temp;
+
+	return 0;
+}
+
+static void __init ixp23xx_pci_common_init(void)
+{
+#ifdef __ARMEB__
+	*IXP23XX_PCI_CONTROL |= 0x20000;	/* set I/O swapping */
+#endif
+	/*
+	 * ADDR_31 needs to be clear for PCI memory access to CPP memory
+	 */
+	*IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_ADDR_31;
+	*IXP23XX_CPP2XSI_CURR_XFER_REG3 |= IXP23XX_CPP2XSI_PSH_OFF;
+
+	/*
+	 * Select correct memory for PCI inbound transactions
+	 */
+	if (ixp23xx_cpp_boot()) {
+		*IXP23XX_PCI_CPP_ADDR_BITS &= ~(1 << 1);
+	} else {
+		*IXP23XX_PCI_CPP_ADDR_BITS |= (1 << 1);
+
+		/*
+		 * Enable coherency on A2 silicon.
+		 */
+		if (arch_is_coherent())
+			*IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_COH_OFF;
+	}
+}
+
+void __init ixp23xx_pci_preinit(void)
+{
+	ixp23xx_pci_common_init();
+
+	hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS, 0,
+			"PCI config cycle to non-existent device");
+
+	*IXP23XX_PCI_ADDR_EXT = 0x0000e000;
+}
+
+/*
+ * Prevent PCI layer from seeing the inbound host-bridge resources
+ */
+static void __devinit pci_fixup_ixp23xx(struct pci_dev *dev)
+{
+	int i;
+
+	dev->class &= 0xff;
+	dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
+	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+		dev->resource[i].start = 0;
+		dev->resource[i].end   = 0;
+		dev->resource[i].flags = 0;
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9002, pci_fixup_ixp23xx);
+
+/*
+ * IXP2300 systems often have large resource requirements, so we just
+ * use our own resource space.
+ */
+static struct resource ixp23xx_pci_mem_space = {
+	.start	= IXP23XX_PCI_MEM_START,
+	.end	= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+	.name	= "PCI Mem Space"
+};
+
+static struct resource ixp23xx_pci_io_space = {
+	.start	= 0x00000100,
+	.end	= 0x01ffffff,
+	.flags	= IORESOURCE_IO,
+	.name	= "PCI I/O Space"
+};
+
+int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys)
+{
+	if (nr >= 1)
+		return 0;
+
+	sys->resource[0] = &ixp23xx_pci_io_space;
+	sys->resource[1] = &ixp23xx_pci_mem_space;
+	sys->resource[2] = NULL;
+
+	return 1;
+}
+
+void __init ixp23xx_pci_slave_init(void)
+{
+	ixp23xx_pci_common_init();
+}