diff options
Diffstat (limited to 'arch/arm/include/asm/hardware')
35 files changed, 4779 insertions, 0 deletions
diff --git a/arch/arm/include/asm/hardware/arm_timer.h b/arch/arm/include/asm/hardware/arm_timer.h new file mode 100644 index 00000000..c0f4e7bf --- /dev/null +++ b/arch/arm/include/asm/hardware/arm_timer.h @@ -0,0 +1,30 @@ +#ifndef __ASM_ARM_HARDWARE_ARM_TIMER_H +#define __ASM_ARM_HARDWARE_ARM_TIMER_H + +/* + * ARM timer implementation, found in Integrator, Versatile and Realview + * platforms. Not all platforms support all registers and bits in these + * registers, so we mark them with A for Integrator AP, C for Integrator + * CP, V for Versatile and R for Realview. + * + * Integrator AP has 16-bit timers, Integrator CP, Versatile and Realview + * can have 16-bit or 32-bit selectable via a bit in the control register. + */ +#define TIMER_LOAD 0x00 /* ACVR rw */ +#define TIMER_VALUE 0x04 /* ACVR ro */ +#define TIMER_CTRL 0x08 /* ACVR rw */ +#define TIMER_CTRL_ONESHOT (1 << 0) /* CVR */ +#define TIMER_CTRL_32BIT (1 << 1) /* CVR */ +#define TIMER_CTRL_DIV1 (0 << 2) /* ACVR */ +#define TIMER_CTRL_DIV16 (1 << 2) /* ACVR */ +#define TIMER_CTRL_DIV256 (2 << 2) /* ACVR */ +#define TIMER_CTRL_IE (1 << 5) /* VR */ +#define TIMER_CTRL_PERIODIC (1 << 6) /* ACVR */ +#define TIMER_CTRL_ENABLE (1 << 7) /* ACVR */ + +#define TIMER_INTCLR 0x0c /* ACVR wo */ +#define TIMER_RIS 0x10 /* CVR ro */ +#define TIMER_MIS 0x14 /* CVR ro */ +#define TIMER_BGLOAD 0x18 /* CVR rw */ + +#endif diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h new file mode 100644 index 00000000..2a20876e --- /dev/null +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -0,0 +1,82 @@ +/* + * arch/arm/include/asm/hardware/cache-l2x0.h + * + * Copyright (C) 2007 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARM_HARDWARE_L2X0_H +#define __ASM_ARM_HARDWARE_L2X0_H + +#define L2X0_CACHE_ID 0x000 +#define L2X0_CACHE_TYPE 0x004 +#define L2X0_CTRL 0x100 +#define L2X0_AUX_CTRL 0x104 +#define L2X0_TAG_LATENCY_CTRL 0x108 +#define L2X0_DATA_LATENCY_CTRL 0x10C +#define L2X0_EVENT_CNT_CTRL 0x200 +#define L2X0_EVENT_CNT1_CFG 0x204 +#define L2X0_EVENT_CNT0_CFG 0x208 +#define L2X0_EVENT_CNT1_VAL 0x20C +#define L2X0_EVENT_CNT0_VAL 0x210 +#define L2X0_INTR_MASK 0x214 +#define L2X0_MASKED_INTR_STAT 0x218 +#define L2X0_RAW_INTR_STAT 0x21C +#define L2X0_INTR_CLEAR 0x220 +#define L2X0_CACHE_SYNC 0x730 +#define L2X0_DUMMY_REG 0x740 +#define L2X0_INV_LINE_PA 0x770 +#define L2X0_INV_WAY 0x77C +#define L2X0_CLEAN_LINE_PA 0x7B0 +#define L2X0_CLEAN_LINE_IDX 0x7B8 +#define L2X0_CLEAN_WAY 0x7BC +#define L2X0_CLEAN_INV_LINE_PA 0x7F0 +#define L2X0_CLEAN_INV_LINE_IDX 0x7F8 +#define L2X0_CLEAN_INV_WAY 0x7FC +#define L2X0_LOCKDOWN_WAY_D 0x900 +#define L2X0_LOCKDOWN_WAY_I 0x904 +#define L2X0_TEST_OPERATION 0xF00 +#define L2X0_LINE_DATA 0xF10 +#define L2X0_LINE_TAG 0xF30 +#define L2X0_DEBUG_CTRL 0xF40 +#define L2X0_PREFETCH_CTRL 0xF60 +#define L2X0_POWER_CTRL 0xF80 +#define L2X0_DYNAMIC_CLK_GATING_EN (1 << 1) +#define L2X0_STNDBY_MODE_EN (1 << 0) + +/* Registers shifts and masks */ +#define L2X0_CACHE_ID_REV_MASK (0x3f) +#define L2X0_CACHE_ID_PART_MASK (0xf << 6) +#define L2X0_CACHE_ID_PART_L210 (1 << 6) +#define L2X0_CACHE_ID_PART_L310 (3 << 6) + +#define L2X0_AUX_CTRL_MASK 0xc0000fff +#define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT 16 +#define L2X0_AUX_CTRL_WAY_SIZE_SHIFT 17 +#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x7 << 17) +#define L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT 22 +#define L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT 26 +#define L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT 27 +#define L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT 28 +#define L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT 29 +#define L2X0_AUX_CTRL_EARLY_BRESP_SHIFT 30 + +#define REV_PL310_R2P0 4 + +#ifndef __ASSEMBLY__ +extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask); +#endif + +#endif diff --git a/arch/arm/include/asm/hardware/cache-tauros2.h b/arch/arm/include/asm/hardware/cache-tauros2.h new file mode 100644 index 00000000..538f17ca --- /dev/null +++ b/arch/arm/include/asm/hardware/cache-tauros2.h @@ -0,0 +1,11 @@ +/* + * arch/arm/include/asm/hardware/cache-tauros2.h + * + * Copyright (C) 2008 Marvell Semiconductor + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +extern void __init tauros2_init(void); diff --git a/arch/arm/include/asm/hardware/clps7111.h b/arch/arm/include/asm/hardware/clps7111.h new file mode 100644 index 00000000..44477225 --- /dev/null +++ b/arch/arm/include/asm/hardware/clps7111.h @@ -0,0 +1,184 @@ +/* + * arch/arm/include/asm/hardware/clps7111.h + * + * This file contains the hardware definitions of the CLPS7111 internal + * registers. + * + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_HARDWARE_CLPS7111_H +#define __ASM_HARDWARE_CLPS7111_H + +#define CLPS7111_PHYS_BASE (0x80000000) + +#ifndef __ASSEMBLY__ +#define clps_readb(off) __raw_readb(CLPS7111_BASE + (off)) +#define clps_readw(off) __raw_readw(CLPS7111_BASE + (off)) +#define clps_readl(off) __raw_readl(CLPS7111_BASE + (off)) +#define clps_writeb(val,off) __raw_writeb(val, CLPS7111_BASE + (off)) +#define clps_writew(val,off) __raw_writew(val, CLPS7111_BASE + (off)) +#define clps_writel(val,off) __raw_writel(val, CLPS7111_BASE + (off)) +#endif + +#define PADR (0x0000) +#define PBDR (0x0001) +#define PDDR (0x0003) +#define PADDR (0x0040) +#define PBDDR (0x0041) +#define PDDDR (0x0043) +#define PEDR (0x0080) +#define PEDDR (0x00c0) +#define SYSCON1 (0x0100) +#define SYSFLG1 (0x0140) +#define MEMCFG1 (0x0180) +#define MEMCFG2 (0x01c0) +#define DRFPR (0x0200) +#define INTSR1 (0x0240) +#define INTMR1 (0x0280) +#define LCDCON (0x02c0) +#define TC1D (0x0300) +#define TC2D (0x0340) +#define RTCDR (0x0380) +#define RTCMR (0x03c0) +#define PMPCON (0x0400) +#define CODR (0x0440) +#define UARTDR1 (0x0480) +#define UBRLCR1 (0x04c0) +#define SYNCIO (0x0500) +#define PALLSW (0x0540) +#define PALMSW (0x0580) +#define STFCLR (0x05c0) +#define BLEOI (0x0600) +#define MCEOI (0x0640) +#define TEOI (0x0680) +#define TC1EOI (0x06c0) +#define TC2EOI (0x0700) +#define RTCEOI (0x0740) +#define UMSEOI (0x0780) +#define COEOI (0x07c0) +#define HALT (0x0800) +#define STDBY (0x0840) + +#define FBADDR (0x1000) +#define SYSCON2 (0x1100) +#define SYSFLG2 (0x1140) +#define INTSR2 (0x1240) +#define INTMR2 (0x1280) +#define UARTDR2 (0x1480) +#define UBRLCR2 (0x14c0) +#define SS2DR (0x1500) +#define SRXEOF (0x1600) +#define SS2POP (0x16c0) +#define KBDEOI (0x1700) + +/* common bits: SYSCON1 / SYSCON2 */ +#define SYSCON_UARTEN (1 << 8) + +#define SYSCON1_KBDSCAN(x) ((x) & 15) +#define SYSCON1_KBDSCANMASK (15) +#define SYSCON1_TC1M (1 << 4) +#define SYSCON1_TC1S (1 << 5) +#define SYSCON1_TC2M (1 << 6) +#define SYSCON1_TC2S (1 << 7) +#define SYSCON1_UART1EN SYSCON_UARTEN +#define SYSCON1_BZTOG (1 << 9) +#define SYSCON1_BZMOD (1 << 10) +#define SYSCON1_DBGEN (1 << 11) +#define SYSCON1_LCDEN (1 << 12) +#define SYSCON1_CDENTX (1 << 13) +#define SYSCON1_CDENRX (1 << 14) +#define SYSCON1_SIREN (1 << 15) +#define SYSCON1_ADCKSEL(x) (((x) & 3) << 16) +#define SYSCON1_ADCKSEL_MASK (3 << 16) +#define SYSCON1_EXCKEN (1 << 18) +#define SYSCON1_WAKEDIS (1 << 19) +#define SYSCON1_IRTXM (1 << 20) + +/* common bits: SYSFLG1 / SYSFLG2 */ +#define SYSFLG_UBUSY (1 << 11) +#define SYSFLG_URXFE (1 << 22) +#define SYSFLG_UTXFF (1 << 23) + +#define SYSFLG1_MCDR (1 << 0) +#define SYSFLG1_DCDET (1 << 1) +#define SYSFLG1_WUDR (1 << 2) +#define SYSFLG1_WUON (1 << 3) +#define SYSFLG1_CTS (1 << 8) +#define SYSFLG1_DSR (1 << 9) +#define SYSFLG1_DCD (1 << 10) +#define SYSFLG1_UBUSY SYSFLG_UBUSY +#define SYSFLG1_NBFLG (1 << 12) +#define SYSFLG1_RSTFLG (1 << 13) +#define SYSFLG1_PFFLG (1 << 14) +#define SYSFLG1_CLDFLG (1 << 15) +#define SYSFLG1_URXFE SYSFLG_URXFE +#define SYSFLG1_UTXFF SYSFLG_UTXFF +#define SYSFLG1_CRXFE (1 << 24) +#define SYSFLG1_CTXFF (1 << 25) +#define SYSFLG1_SSIBUSY (1 << 26) +#define SYSFLG1_ID (1 << 29) + +#define SYSFLG2_SSRXOF (1 << 0) +#define SYSFLG2_RESVAL (1 << 1) +#define SYSFLG2_RESFRM (1 << 2) +#define SYSFLG2_SS2RXFE (1 << 3) +#define SYSFLG2_SS2TXFF (1 << 4) +#define SYSFLG2_SS2TXUF (1 << 5) +#define SYSFLG2_CKMODE (1 << 6) +#define SYSFLG2_UBUSY SYSFLG_UBUSY +#define SYSFLG2_URXFE SYSFLG_URXFE +#define SYSFLG2_UTXFF SYSFLG_UTXFF + +#define LCDCON_GSEN (1 << 30) +#define LCDCON_GSMD (1 << 31) + +#define SYSCON2_SERSEL (1 << 0) +#define SYSCON2_KBD6 (1 << 1) +#define SYSCON2_DRAMZ (1 << 2) +#define SYSCON2_KBWEN (1 << 3) +#define SYSCON2_SS2TXEN (1 << 4) +#define SYSCON2_PCCARD1 (1 << 5) +#define SYSCON2_PCCARD2 (1 << 6) +#define SYSCON2_SS2RXEN (1 << 7) +#define SYSCON2_UART2EN SYSCON_UARTEN +#define SYSCON2_SS2MAEN (1 << 9) +#define SYSCON2_OSTB (1 << 12) +#define SYSCON2_CLKENSL (1 << 13) +#define SYSCON2_BUZFREQ (1 << 14) + +/* common bits: UARTDR1 / UARTDR2 */ +#define UARTDR_FRMERR (1 << 8) +#define UARTDR_PARERR (1 << 9) +#define UARTDR_OVERR (1 << 10) + +/* common bits: UBRLCR1 / UBRLCR2 */ +#define UBRLCR_BAUD_MASK ((1 << 12) - 1) +#define UBRLCR_BREAK (1 << 12) +#define UBRLCR_PRTEN (1 << 13) +#define UBRLCR_EVENPRT (1 << 14) +#define UBRLCR_XSTOP (1 << 15) +#define UBRLCR_FIFOEN (1 << 16) +#define UBRLCR_WRDLEN5 (0 << 17) +#define UBRLCR_WRDLEN6 (1 << 17) +#define UBRLCR_WRDLEN7 (2 << 17) +#define UBRLCR_WRDLEN8 (3 << 17) +#define UBRLCR_WRDLEN_MASK (3 << 17) + +#define SYNCIO_SMCKEN (1 << 13) +#define SYNCIO_TXFRMEN (1 << 14) + +#endif /* __ASM_HARDWARE_CLPS7111_H */ diff --git a/arch/arm/include/asm/hardware/coresight.h b/arch/arm/include/asm/hardware/coresight.h new file mode 100644 index 00000000..dcf74d71 --- /dev/null +++ b/arch/arm/include/asm/hardware/coresight.h @@ -0,0 +1,185 @@ +/* + * linux/arch/arm/include/asm/hardware/coresight.h + * + * CoreSight components' registers + * + * Copyright (C) 2009 Nokia Corporation. + * Alexander Shishkin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_HARDWARE_CORESIGHT_H +#define __ASM_HARDWARE_CORESIGHT_H + +#define TRACER_ACCESSED_BIT 0 +#define TRACER_RUNNING_BIT 1 +#define TRACER_CYCLE_ACC_BIT 2 +#define TRACER_TRACE_DATA_BIT 3 +#define TRACER_TIMESTAMP_BIT 4 +#define TRACER_BRANCHOUTPUT_BIT 5 +#define TRACER_RETURN_STACK_BIT 6 +#define TRACER_ACCESSED BIT(TRACER_ACCESSED_BIT) +#define TRACER_RUNNING BIT(TRACER_RUNNING_BIT) +#define TRACER_CYCLE_ACC BIT(TRACER_CYCLE_ACC_BIT) +#define TRACER_TRACE_DATA BIT(TRACER_TRACE_DATA_BIT) +#define TRACER_TIMESTAMP BIT(TRACER_TIMESTAMP_BIT) +#define TRACER_BRANCHOUTPUT BIT(TRACER_BRANCHOUTPUT_BIT) +#define TRACER_RETURN_STACK BIT(TRACER_RETURN_STACK_BIT) + +#define TRACER_TIMEOUT 10000 + +#define etm_writel(t, id, v, x) \ + (__raw_writel((v), (t)->etm_regs[(id)] + (x))) +#define etm_readl(t, id, x) (__raw_readl((t)->etm_regs[(id)] + (x))) + +/* CoreSight Management Registers */ +#define CSMR_LOCKACCESS 0xfb0 +#define CSMR_LOCKSTATUS 0xfb4 +#define CSMR_AUTHSTATUS 0xfb8 +#define CSMR_DEVID 0xfc8 +#define CSMR_DEVTYPE 0xfcc +/* CoreSight Component Registers */ +#define CSCR_CLASS 0xff4 + +#define UNLOCK_MAGIC 0xc5acce55 + +/* ETM control register, "ETM Architecture", 3.3.1 */ +#define ETMR_CTRL 0 +#define ETMCTRL_POWERDOWN 1 +#define ETMCTRL_PROGRAM (1 << 10) +#define ETMCTRL_PORTSEL (1 << 11) +#define ETMCTRL_CONTEXTIDSIZE(x) (((x) & 3) << 14) +#define ETMCTRL_PORTMASK1 (7 << 4) +#define ETMCTRL_PORTMASK2 (1 << 21) +#define ETMCTRL_PORTMASK (ETMCTRL_PORTMASK1 | ETMCTRL_PORTMASK2) +#define ETMCTRL_PORTSIZE(x) ((((x) & 7) << 4) | (!!((x) & 8)) << 21) +#define ETMCTRL_DO_CPRT (1 << 1) +#define ETMCTRL_DATAMASK (3 << 2) +#define ETMCTRL_DATA_DO_DATA (1 << 2) +#define ETMCTRL_DATA_DO_ADDR (1 << 3) +#define ETMCTRL_DATA_DO_BOTH (ETMCTRL_DATA_DO_DATA | ETMCTRL_DATA_DO_ADDR) +#define ETMCTRL_BRANCH_OUTPUT (1 << 8) +#define ETMCTRL_CYCLEACCURATE (1 << 12) +#define ETMCTRL_TIMESTAMP_EN (1 << 28) +#define ETMCTRL_RETURN_STACK_EN (1 << 29) + +/* ETM configuration code register */ +#define ETMR_CONFCODE (0x04) +#define ETMCCR_ETMIDR_PRESENT BIT(31) + +/* ETM trace start/stop resource control register */ +#define ETMR_TRACESSCTRL (0x18) + +/* ETM trigger event register */ +#define ETMR_TRIGEVT (0x08) + +/* address access type register bits, "ETM architecture", + * table 3-27 */ +/* - access type */ +#define ETMAAT_IFETCH 0 +#define ETMAAT_IEXEC 1 +#define ETMAAT_IEXECPASS 2 +#define ETMAAT_IEXECFAIL 3 +#define ETMAAT_DLOADSTORE 4 +#define ETMAAT_DLOAD 5 +#define ETMAAT_DSTORE 6 +/* - comparison access size */ +#define ETMAAT_JAVA (0 << 3) +#define ETMAAT_THUMB (1 << 3) +#define ETMAAT_ARM (3 << 3) +/* - data value comparison control */ +#define ETMAAT_NOVALCMP (0 << 5) +#define ETMAAT_VALMATCH (1 << 5) +#define ETMAAT_VALNOMATCH (3 << 5) +/* - exact match */ +#define ETMAAT_EXACTMATCH (1 << 7) +/* - context id comparator control */ +#define ETMAAT_IGNCONTEXTID (0 << 8) +#define ETMAAT_VALUE1 (1 << 8) +#define ETMAAT_VALUE2 (2 << 8) +#define ETMAAT_VALUE3 (3 << 8) +/* - security level control */ +#define ETMAAT_IGNSECURITY (0 << 10) +#define ETMAAT_NSONLY (1 << 10) +#define ETMAAT_SONLY (2 << 10) + +#define ETMR_COMP_VAL(x) (0x40 + (x) * 4) +#define ETMR_COMP_ACC_TYPE(x) (0x80 + (x) * 4) + +/* ETM status register, "ETM Architecture", 3.3.2 */ +#define ETMR_STATUS (0x10) +#define ETMST_OVERFLOW BIT(0) +#define ETMST_PROGBIT BIT(1) +#define ETMST_STARTSTOP BIT(2) +#define ETMST_TRIGGER BIT(3) + +#define etm_progbit(t) (etm_readl((t), ETMR_STATUS) & ETMST_PROGBIT) +#define etm_started(t) (etm_readl((t), ETMR_STATUS) & ETMST_STARTSTOP) +#define etm_triggered(t) (etm_readl((t), ETMR_STATUS) & ETMST_TRIGGER) + +#define ETMR_TRACEENCTRL2 0x1c +#define ETMR_TRACEENCTRL 0x24 +#define ETMTE_INCLEXCL BIT(24) +#define ETMR_TRACEENEVT 0x20 + +#define ETMR_VIEWDATAEVT 0x30 +#define ETMR_VIEWDATACTRL1 0x34 +#define ETMR_VIEWDATACTRL2 0x38 +#define ETMR_VIEWDATACTRL3 0x3c +#define ETMVDC3_EXCLONLY BIT(16) + +#define ETMCTRL_OPTS (ETMCTRL_DO_CPRT) + +#define ETMR_ID 0x1e4 +#define ETMIDR_VERSION(x) (((x) >> 4) & 0xff) +#define ETMIDR_VERSION_3_1 0x21 +#define ETMIDR_VERSION_PFT_1_0 0x30 + +#define ETMR_CCE 0x1e8 +#define ETMCCER_RETURN_STACK_IMPLEMENTED BIT(23) +#define ETMCCER_TIMESTAMPING_IMPLEMENTED BIT(22) + +#define ETMR_TRACEIDR 0x200 + +/* ETM management registers, "ETM Architecture", 3.5.24 */ +#define ETMMR_OSLAR 0x300 +#define ETMMR_OSLSR 0x304 +#define ETMMR_OSSRR 0x308 +#define ETMMR_PDSR 0x314 + +/* ETB registers, "CoreSight Components TRM", 9.3 */ +#define ETBR_DEPTH 0x04 +#define ETBR_STATUS 0x0c +#define ETBR_READMEM 0x10 +#define ETBR_READADDR 0x14 +#define ETBR_WRITEADDR 0x18 +#define ETBR_TRIGGERCOUNT 0x1c +#define ETBR_CTRL 0x20 +#define ETBR_FORMATTERCTRL 0x304 +#define ETBFF_ENFTC 1 +#define ETBFF_ENFCONT BIT(1) +#define ETBFF_FONFLIN BIT(4) +#define ETBFF_MANUAL_FLUSH BIT(6) +#define ETBFF_TRIGIN BIT(8) +#define ETBFF_TRIGEVT BIT(9) +#define ETBFF_TRIGFL BIT(10) +#define ETBFF_STOPFL BIT(12) + +#define etb_writel(t, v, x) \ + (__raw_writel((v), (t)->etb_regs + (x))) +#define etb_readl(t, x) (__raw_readl((t)->etb_regs + (x))) + +#define etm_lock(t, id) \ + do { etm_writel((t), (id), 0, CSMR_LOCKACCESS); } while (0) +#define etm_unlock(t, id) \ + do { etm_writel((t), (id), UNLOCK_MAGIC, CSMR_LOCKACCESS); } while (0) + +#define etb_lock(t) do { etb_writel((t), 0, CSMR_LOCKACCESS); } while (0) +#define etb_unlock(t) \ + do { etb_writel((t), UNLOCK_MAGIC, CSMR_LOCKACCESS); } while (0) + +#endif /* __ASM_HARDWARE_CORESIGHT_H */ + diff --git a/arch/arm/include/asm/hardware/cs89712.h b/arch/arm/include/asm/hardware/cs89712.h new file mode 100644 index 00000000..f7562693 --- /dev/null +++ b/arch/arm/include/asm/hardware/cs89712.h @@ -0,0 +1,49 @@ +/* + * arch/arm/include/asm/hardware/cs89712.h + * + * This file contains the hardware definitions of the CS89712 + * additional internal registers. + * + * Copyright (C) 2001 Thomas Gleixner autronix automation <gleixner@autronix.de> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_HARDWARE_CS89712_H +#define __ASM_HARDWARE_CS89712_H + +/* +* CS89712 additional registers +*/ + +#define PCDR 0x0002 /* Port C Data register ---------------------------- */ +#define PCDDR 0x0042 /* Port C Data Direction register ------------------ */ +#define SDCONF 0x2300 /* SDRAM Configuration register ---------------------*/ +#define SDRFPR 0x2340 /* SDRAM Refresh period register --------------------*/ + +#define SDCONF_ACTIVE (1 << 10) +#define SDCONF_CLKCTL (1 << 9) +#define SDCONF_WIDTH_4 (0 << 7) +#define SDCONF_WIDTH_8 (1 << 7) +#define SDCONF_WIDTH_16 (2 << 7) +#define SDCONF_WIDTH_32 (3 << 7) +#define SDCONF_SIZE_16 (0 << 5) +#define SDCONF_SIZE_64 (1 << 5) +#define SDCONF_SIZE_128 (2 << 5) +#define SDCONF_SIZE_256 (3 << 5) +#define SDCONF_CASLAT_2 (2) +#define SDCONF_CASLAT_3 (3) + +#endif /* __ASM_HARDWARE_CS89712_H */ diff --git a/arch/arm/include/asm/hardware/debug-8250.S b/arch/arm/include/asm/hardware/debug-8250.S new file mode 100644 index 00000000..22c68925 --- /dev/null +++ b/arch/arm/include/asm/hardware/debug-8250.S @@ -0,0 +1,29 @@ +/* + * arch/arm/include/asm/hardware/debug-8250.S + * + * Copyright (C) 1994-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/serial_reg.h> + + .macro senduart,rd,rx + strb \rd, [\rx, #UART_TX << UART_SHIFT] + .endm + + .macro busyuart,rd,rx +1002: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT] + and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE + teq \rd, #UART_LSR_TEMT | UART_LSR_THRE + bne 1002b + .endm + + .macro waituart,rd,rx +#ifdef FLOW_CONTROL +1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT] + tst \rd, #UART_MSR_CTS + beq 1001b +#endif + .endm diff --git a/arch/arm/include/asm/hardware/debug-pl01x.S b/arch/arm/include/asm/hardware/debug-pl01x.S new file mode 100644 index 00000000..f9fd083e --- /dev/null +++ b/arch/arm/include/asm/hardware/debug-pl01x.S @@ -0,0 +1,29 @@ +/* arch/arm/include/asm/hardware/debug-pl01x.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ +#include <linux/amba/serial.h> + + .macro senduart,rd,rx + strb \rd, [\rx, #UART01x_DR] + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #UART01x_FR] + tst \rd, #UART01x_FR_TXFF + bne 1001b + .endm + + .macro busyuart,rd,rx +1001: ldr \rd, [\rx, #UART01x_FR] + tst \rd, #UART01x_FR_BUSY + bne 1001b + .endm diff --git a/arch/arm/include/asm/hardware/dec21285.h b/arch/arm/include/asm/hardware/dec21285.h new file mode 100644 index 00000000..0d755275 --- /dev/null +++ b/arch/arm/include/asm/hardware/dec21285.h @@ -0,0 +1,147 @@ +/* + * arch/arm/include/asm/hardware/dec21285.h + * + * Copyright (C) 1998 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * DC21285 registers + */ +#define DC21285_PCI_IACK 0x79000000 +#define DC21285_ARMCSR_BASE 0x42000000 +#define DC21285_PCI_TYPE_0_CONFIG 0x7b000000 +#define DC21285_PCI_TYPE_1_CONFIG 0x7a000000 +#define DC21285_OUTBOUND_WRITE_FLUSH 0x78000000 +#define DC21285_FLASH 0x41000000 +#define DC21285_PCI_IO 0x7c000000 +#define DC21285_PCI_MEM 0x80000000 + +#ifndef __ASSEMBLY__ +#include <mach/hardware.h> +#define DC21285_IO(x) ((volatile unsigned long *)(ARMCSR_BASE+(x))) +#else +#define DC21285_IO(x) (x) +#endif + +#define CSR_PCICMD DC21285_IO(0x0004) +#define CSR_CLASSREV DC21285_IO(0x0008) +#define CSR_PCICACHELINESIZE DC21285_IO(0x000c) +#define CSR_PCICSRBASE DC21285_IO(0x0010) +#define CSR_PCICSRIOBASE DC21285_IO(0x0014) +#define CSR_PCISDRAMBASE DC21285_IO(0x0018) +#define CSR_PCIROMBASE DC21285_IO(0x0030) +#define CSR_MBOX0 DC21285_IO(0x0050) +#define CSR_MBOX1 DC21285_IO(0x0054) +#define CSR_MBOX2 DC21285_IO(0x0058) +#define CSR_MBOX3 DC21285_IO(0x005c) +#define CSR_DOORBELL DC21285_IO(0x0060) +#define CSR_DOORBELL_SETUP DC21285_IO(0x0064) +#define CSR_ROMWRITEREG DC21285_IO(0x0068) +#define CSR_CSRBASEMASK DC21285_IO(0x00f8) +#define CSR_CSRBASEOFFSET DC21285_IO(0x00fc) +#define CSR_SDRAMBASEMASK DC21285_IO(0x0100) +#define CSR_SDRAMBASEOFFSET DC21285_IO(0x0104) +#define CSR_ROMBASEMASK DC21285_IO(0x0108) +#define CSR_SDRAMTIMING DC21285_IO(0x010c) +#define CSR_SDRAMADDRSIZE0 DC21285_IO(0x0110) +#define CSR_SDRAMADDRSIZE1 DC21285_IO(0x0114) +#define CSR_SDRAMADDRSIZE2 DC21285_IO(0x0118) +#define CSR_SDRAMADDRSIZE3 DC21285_IO(0x011c) +#define CSR_I2O_INFREEHEAD DC21285_IO(0x0120) +#define CSR_I2O_INPOSTTAIL DC21285_IO(0x0124) +#define CSR_I2O_OUTPOSTHEAD DC21285_IO(0x0128) +#define CSR_I2O_OUTFREETAIL DC21285_IO(0x012c) +#define CSR_I2O_INFREECOUNT DC21285_IO(0x0130) +#define CSR_I2O_OUTPOSTCOUNT DC21285_IO(0x0134) +#define CSR_I2O_INPOSTCOUNT DC21285_IO(0x0138) +#define CSR_SA110_CNTL DC21285_IO(0x013c) +#define SA110_CNTL_INITCMPLETE (1 << 0) +#define SA110_CNTL_ASSERTSERR (1 << 1) +#define SA110_CNTL_RXSERR (1 << 3) +#define SA110_CNTL_SA110DRAMPARITY (1 << 4) +#define SA110_CNTL_PCISDRAMPARITY (1 << 5) +#define SA110_CNTL_DMASDRAMPARITY (1 << 6) +#define SA110_CNTL_DISCARDTIMER (1 << 8) +#define SA110_CNTL_PCINRESET (1 << 9) +#define SA110_CNTL_I2O_256 (0 << 10) +#define SA110_CNTL_I20_512 (1 << 10) +#define SA110_CNTL_I2O_1024 (2 << 10) +#define SA110_CNTL_I2O_2048 (3 << 10) +#define SA110_CNTL_I2O_4096 (4 << 10) +#define SA110_CNTL_I2O_8192 (5 << 10) +#define SA110_CNTL_I2O_16384 (6 << 10) +#define SA110_CNTL_I2O_32768 (7 << 10) +#define SA110_CNTL_WATCHDOG (1 << 13) +#define SA110_CNTL_ROMWIDTH_UNDEF (0 << 14) +#define SA110_CNTL_ROMWIDTH_16 (1 << 14) +#define SA110_CNTL_ROMWIDTH_32 (2 << 14) +#define SA110_CNTL_ROMWIDTH_8 (3 << 14) +#define SA110_CNTL_ROMACCESSTIME(x) ((x)<<16) +#define SA110_CNTL_ROMBURSTTIME(x) ((x)<<20) +#define SA110_CNTL_ROMTRISTATETIME(x) ((x)<<24) +#define SA110_CNTL_XCSDIR(x) ((x)<<28) +#define SA110_CNTL_PCICFN (1 << 31) + +/* + * footbridge_cfn_mode() is used when we want + * to check whether we are the central function + */ +#define __footbridge_cfn_mode() (*CSR_SA110_CNTL & SA110_CNTL_PCICFN) +#if defined(CONFIG_FOOTBRIDGE_HOST) && defined(CONFIG_FOOTBRIDGE_ADDIN) +#define footbridge_cfn_mode() __footbridge_cfn_mode() +#elif defined(CONFIG_FOOTBRIDGE_HOST) +#define footbridge_cfn_mode() (1) +#else +#define footbridge_cfn_mode() (0) +#endif + +#define CSR_PCIADDR_EXTN DC21285_IO(0x0140) +#define CSR_PREFETCHMEMRANGE DC21285_IO(0x0144) +#define CSR_XBUS_CYCLE DC21285_IO(0x0148) +#define CSR_XBUS_IOSTROBE DC21285_IO(0x014c) +#define CSR_DOORBELL_PCI DC21285_IO(0x0150) +#define CSR_DOORBELL_SA110 DC21285_IO(0x0154) +#define CSR_UARTDR DC21285_IO(0x0160) +#define CSR_RXSTAT DC21285_IO(0x0164) +#define CSR_H_UBRLCR DC21285_IO(0x0168) +#define CSR_M_UBRLCR DC21285_IO(0x016c) +#define CSR_L_UBRLCR DC21285_IO(0x0170) +#define CSR_UARTCON DC21285_IO(0x0174) +#define CSR_UARTFLG DC21285_IO(0x0178) +#define CSR_IRQ_STATUS DC21285_IO(0x0180) +#define CSR_IRQ_RAWSTATUS DC21285_IO(0x0184) +#define CSR_IRQ_ENABLE DC21285_IO(0x0188) +#define CSR_IRQ_DISABLE DC21285_IO(0x018c) +#define CSR_IRQ_SOFT DC21285_IO(0x0190) +#define CSR_FIQ_STATUS DC21285_IO(0x0280) +#define CSR_FIQ_RAWSTATUS DC21285_IO(0x0284) +#define CSR_FIQ_ENABLE DC21285_IO(0x0288) +#define CSR_FIQ_DISABLE DC21285_IO(0x028c) +#define CSR_FIQ_SOFT DC21285_IO(0x0290) +#define CSR_TIMER1_LOAD DC21285_IO(0x0300) +#define CSR_TIMER1_VALUE DC21285_IO(0x0304) +#define CSR_TIMER1_CNTL DC21285_IO(0x0308) +#define CSR_TIMER1_CLR DC21285_IO(0x030c) +#define CSR_TIMER2_LOAD DC21285_IO(0x0320) +#define CSR_TIMER2_VALUE DC21285_IO(0x0324) +#define CSR_TIMER2_CNTL DC21285_IO(0x0328) +#define CSR_TIMER2_CLR DC21285_IO(0x032c) +#define CSR_TIMER3_LOAD DC21285_IO(0x0340) +#define CSR_TIMER3_VALUE DC21285_IO(0x0344) +#define CSR_TIMER3_CNTL DC21285_IO(0x0348) +#define CSR_TIMER3_CLR DC21285_IO(0x034c) +#define CSR_TIMER4_LOAD DC21285_IO(0x0360) +#define CSR_TIMER4_VALUE DC21285_IO(0x0364) +#define CSR_TIMER4_CNTL DC21285_IO(0x0368) +#define CSR_TIMER4_CLR DC21285_IO(0x036c) + +#define TIMER_CNTL_ENABLE (1 << 7) +#define TIMER_CNTL_AUTORELOAD (1 << 6) +#define TIMER_CNTL_DIV1 (0) +#define TIMER_CNTL_DIV16 (1 << 2) +#define TIMER_CNTL_DIV256 (2 << 2) +#define TIMER_CNTL_CNTEXT (3 << 2) + + diff --git a/arch/arm/include/asm/hardware/entry-macro-gic.S b/arch/arm/include/asm/hardware/entry-macro-gic.S new file mode 100644 index 00000000..c115b82f --- /dev/null +++ b/arch/arm/include/asm/hardware/entry-macro-gic.S @@ -0,0 +1,75 @@ +/* + * arch/arm/include/asm/hardware/entry-macro-gic.S + * + * Low-level IRQ helper macros for GIC + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <asm/hardware/gic.h> + +#ifndef HAVE_GET_IRQNR_PREAMBLE + .macro get_irqnr_preamble, base, tmp + ldr \base, =gic_cpu_base_addr + ldr \base, [\base] + .endm +#endif + +/* + * The interrupt numbering scheme is defined in the + * interrupt controller spec. To wit: + * + * Interrupts 0-15 are IPI + * 16-28 are reserved + * 29-31 are local. We allow 30 to be used for the watchdog. + * 32-1020 are global + * 1021-1022 are reserved + * 1023 is "spurious" (no interrupt) + * + * For now, we ignore all local interrupts so only return an interrupt if it's + * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. + * + * A simple read from the controller will tell us the number of the highest + * priority enabled interrupt. We then just need to check whether it is in the + * valid range for an IRQ (30-1020 inclusive). + */ + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + ldr \irqstat, [\base, #GIC_CPU_INTACK] + /* bits 12-10 = src CPU, 9-0 = int # */ + + ldr \tmp, =1021 + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #29 + cmpcc \irqnr, \irqnr + cmpne \irqnr, \tmp + cmpcs \irqnr, \irqnr + .endm + +/* We assume that irqstat (the raw value of the IRQ acknowledge + * register) is preserved from the macro above. + * If there is an IPI, we immediately signal end of interrupt on the + * controller, since this requires the original irqstat value which + * we won't easily be able to recreate later. + */ + + .macro test_for_ipi, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #16 + strcc \irqstat, [\base, #GIC_CPU_EOI] + cmpcs \irqnr, \irqnr + .endm + +/* As above, this assumes that irqstat and base are preserved.. */ + + .macro test_for_ltirq, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + mov \tmp, #0 + cmp \irqnr, #29 + moveq \tmp, #1 + streq \irqstat, [\base, #GIC_CPU_EOI] + cmp \tmp, #0 + .endm diff --git a/arch/arm/include/asm/hardware/entry-macro-iomd.S b/arch/arm/include/asm/hardware/entry-macro-iomd.S new file mode 100644 index 00000000..e0af4983 --- /dev/null +++ b/arch/arm/include/asm/hardware/entry-macro-iomd.S @@ -0,0 +1,139 @@ +/* + * arch/arm/include/asm/hardware/entry-macro-iomd.S + * + * Low-level IRQ helper macros for IOC/IOMD based platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/* IOC / IOMD based hardware */ +#include <asm/hardware/iomd.h> + + .macro disable_fiq + mov r12, #ioc_base_high + .if ioc_base_low + orr r12, r12, #ioc_base_low + .endif + strb r12, [r12, #0x38] @ Disable FIQ register + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldrb \irqstat, [\base, #IOMD_IRQREQB] @ get high priority first + ldr \tmp, =irq_prio_h + teq \irqstat, #0 +#ifdef IOMD_BASE + ldreqb \irqstat, [\base, #IOMD_DMAREQ] @ get dma + addeq \tmp, \tmp, #256 @ irq_prio_h table size + teqeq \irqstat, #0 + bne 2406f +#endif + ldreqb \irqstat, [\base, #IOMD_IRQREQA] @ get low priority + addeq \tmp, \tmp, #256 @ irq_prio_d table size + teqeq \irqstat, #0 +#ifdef IOMD_IRQREQC + ldreqb \irqstat, [\base, #IOMD_IRQREQC] + addeq \tmp, \tmp, #256 @ irq_prio_l table size + teqeq \irqstat, #0 +#endif +#ifdef IOMD_IRQREQD + ldreqb \irqstat, [\base, #IOMD_IRQREQD] + addeq \tmp, \tmp, #256 @ irq_prio_lc table size + teqeq \irqstat, #0 +#endif +2406: ldrneb \irqnr, [\tmp, \irqstat] @ get IRQ number + .endm + +/* + * Interrupt table (incorporates priority). Please note that we + * rely on the order of these tables (see above code). + */ + .align 5 +irq_prio_h: .byte 0, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 12, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 +#ifdef IOMD_BASE +irq_prio_d: .byte 0,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 20,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 +#endif +irq_prio_l: .byte 0, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3 + .byte 4, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3 + .byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 + .byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 + .byte 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3 + .byte 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3 + .byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 + .byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 + .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 + .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 + .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 + .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 + .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 + .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 + .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 + .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 +#ifdef IOMD_IRQREQC +irq_prio_lc: .byte 24,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27 + .byte 28,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27 + .byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29 + .byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29 + .byte 30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27 + .byte 30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27 + .byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29 + .byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29 + .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 + .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 + .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 + .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 + .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 + .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 + .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 + .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 +#endif +#ifdef IOMD_IRQREQD +irq_prio_ld: .byte 40,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43 + .byte 44,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43 + .byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45 + .byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45 + .byte 46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43 + .byte 46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43 + .byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45 + .byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45 + .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 + .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 + .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 + .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 + .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 + .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 + .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 + .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 +#endif + diff --git a/arch/arm/include/asm/hardware/ep7211.h b/arch/arm/include/asm/hardware/ep7211.h new file mode 100644 index 00000000..654d5f62 --- /dev/null +++ b/arch/arm/include/asm/hardware/ep7211.h @@ -0,0 +1,40 @@ +/* + * arch/arm/include/asm/hardware/ep7211.h + * + * This file contains the hardware definitions of the EP7211 internal + * registers. + * + * Copyright (C) 2001 Blue Mug, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_HARDWARE_EP7211_H +#define __ASM_HARDWARE_EP7211_H + +#include <asm/hardware/clps7111.h> + +/* + * define EP7211_BASE to be the base address of the region + * you want to access. + */ + +#define EP7211_PHYS_BASE (0x80000000) + +/* + * XXX miket@bluemug.com: need to introduce EP7211 registers (those not + * present in 7212) here. + */ + +#endif /* __ASM_HARDWARE_EP7211_H */ diff --git a/arch/arm/include/asm/hardware/ep7212.h b/arch/arm/include/asm/hardware/ep7212.h new file mode 100644 index 00000000..3b43bbea --- /dev/null +++ b/arch/arm/include/asm/hardware/ep7212.h @@ -0,0 +1,83 @@ +/* + * arch/arm/include/asm/hardware/ep7212.h + * + * This file contains the hardware definitions of the EP7212 internal + * registers. + * + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_HARDWARE_EP7212_H +#define __ASM_HARDWARE_EP7212_H + +/* + * define EP7212_BASE to be the base address of the region + * you want to access. + */ + +#define EP7212_PHYS_BASE (0x80000000) + +#ifndef __ASSEMBLY__ +#define ep_readl(off) __raw_readl(EP7212_BASE + (off)) +#define ep_writel(val,off) __raw_writel(val, EP7212_BASE + (off)) +#endif + +/* + * These registers are specific to the EP7212 only + */ +#define DAIR 0x2000 +#define DAIR0 0x2040 +#define DAIDR1 0x2080 +#define DAIDR2 0x20c0 +#define DAISR 0x2100 +#define SYSCON3 0x2200 +#define INTSR3 0x2240 +#define INTMR3 0x2280 +#define LEDFLSH 0x22c0 + +#define DAIR_DAIEN (1 << 16) +#define DAIR_ECS (1 << 17) +#define DAIR_LCTM (1 << 19) +#define DAIR_LCRM (1 << 20) +#define DAIR_RCTM (1 << 21) +#define DAIR_RCRM (1 << 22) +#define DAIR_LBM (1 << 23) + +#define DAIDR2_FIFOEN (1 << 15) +#define DAIDR2_FIFOLEFT (0x0d << 16) +#define DAIDR2_FIFORIGHT (0x11 << 16) + +#define DAISR_RCTS (1 << 0) +#define DAISR_RCRS (1 << 1) +#define DAISR_LCTS (1 << 2) +#define DAISR_LCRS (1 << 3) +#define DAISR_RCTU (1 << 4) +#define DAISR_RCRO (1 << 5) +#define DAISR_LCTU (1 << 6) +#define DAISR_LCRO (1 << 7) +#define DAISR_RCNF (1 << 8) +#define DAISR_RCNE (1 << 9) +#define DAISR_LCNF (1 << 10) +#define DAISR_LCNE (1 << 11) +#define DAISR_FIFO (1 << 12) + +#define SYSCON3_ADCCON (1 << 0) +#define SYSCON3_DAISEL (1 << 3) +#define SYSCON3_ADCCKNSEN (1 << 4) +#define SYSCON3_FASTWAKE (1 << 8) +#define SYSCON3_DAIEN (1 << 9) + +#endif /* __ASM_HARDWARE_EP7212_H */ diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h new file mode 100644 index 00000000..c8647b30 --- /dev/null +++ b/arch/arm/include/asm/hardware/gic.h @@ -0,0 +1,77 @@ +/* + * arch/arm/include/asm/hardware/gic.h + * + * Copyright (C) 2002 ARM Limited, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_HARDWARE_GIC_H +#define __ASM_ARM_HARDWARE_GIC_H + +#include <linux/compiler.h> + +#define GIC_CPU_CTRL 0x00 +#define GIC_CPU_PRIMASK 0x04 +#define GIC_CPU_BINPOINT 0x08 +#define GIC_CPU_INTACK 0x0c +#define GIC_CPU_EOI 0x10 +#define GIC_CPU_RUNNINGPRI 0x14 +#define GIC_CPU_HIGHPRI 0x18 + +#define GIC_DIST_CTRL 0x000 +#define GIC_DIST_CTR 0x004 +#define GIC_DIST_ENABLE_SET 0x100 +#define GIC_DIST_ENABLE_CLEAR 0x180 +#define GIC_DIST_PENDING_SET 0x200 +#define GIC_DIST_PENDING_CLEAR 0x280 +#define GIC_DIST_ACTIVE_BIT 0x300 +#define GIC_DIST_PRI 0x400 +#define GIC_DIST_TARGET 0x800 +#define GIC_DIST_CONFIG 0xc00 +#define GIC_DIST_SOFTINT 0xf00 + +#ifndef __ASSEMBLY__ +extern void __iomem *gic_cpu_base_addr; +extern struct irq_chip gic_arch_extn; + +struct gic_dist_state { + u32 icddcr; /* 0x000 */ + /* 0x004 RO */ + /* 0x008 RO */ + /* 0x00c ~ 0x07c Reserved */ + u32 icdisrn[8]; /* 0x080 ~ 0x09c */ + u32 icdisern[8]; /* 0x100 ~ 0x11c Reserved */ + /* 0x120 ~ 0x17c */ + u32 icdicern[8]; /* 0x180 ~ 0x19c */ + u32 icdisprn[32]; /* 0x200 ~ 0x27c */ + u32 icdicprn[8]; /* 0x280 ~ 0x29c */ + u32 icdabrn[8]; /* 0x300 ~ 0x31c */ + /* 0x320 ~ 0x3fc Reserved */ + u32 icdiprn[64]; /* 0x400 ~ 0x4fc */ + /* 0x500 ~ 0x7fc Reserved */ + u32 icdiptrn[64]; /* 0x800 ~ 0x8fc */ + /* 0x900 ~ 0xbfc Reserved */ + u32 icdicfrn[16]; /* 0xc00 ~ 0xc3c */ +}; + +struct gic_cpu_state { + u32 iccicr; /* 0x000 */ + u32 iccpmr; /* 0x004 */ + u32 iccbpr; /* 0x008 */ +}; + +void gic_init(unsigned int, unsigned int, void __iomem *, void __iomem *); +void gic_secondary_init(unsigned int); +void gic_cascade_irq(unsigned int gic_nr, unsigned int irq); +void gic_raise_softirq(const struct cpumask *mask, unsigned int irq); +void gic_enable_ppi(unsigned int); +void gic_disable_ppi(unsigned int); +void save_gic_cpu_state(unsigned int gic_nr, struct gic_cpu_state *gcs); +void restore_gic_cpu_state(unsigned int gic_nr, struct gic_cpu_state *gcs); +void save_gic_dist_state(unsigned int gic_nr, struct gic_dist_state *gds); +void restore_gic_dist_state(unsigned int gic_nr, struct gic_dist_state *gds); +#endif + +#endif diff --git a/arch/arm/include/asm/hardware/icst.h b/arch/arm/include/asm/hardware/icst.h new file mode 100644 index 00000000..794220b0 --- /dev/null +++ b/arch/arm/include/asm/hardware/icst.h @@ -0,0 +1,59 @@ +/* + * arch/arm/include/asm/hardware/icst.h + * + * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Support functions for calculating clocks/divisors for the ICST + * clock generators. See http://www.idt.com/ for more information + * on these devices. + */ +#ifndef ASMARM_HARDWARE_ICST_H +#define ASMARM_HARDWARE_ICST_H + +struct icst_params { + unsigned long ref; + unsigned long vco_max; /* inclusive */ + unsigned long vco_min; /* exclusive */ + unsigned short vd_min; /* inclusive */ + unsigned short vd_max; /* inclusive */ + unsigned char rd_min; /* inclusive */ + unsigned char rd_max; /* inclusive */ + const unsigned char *s2div; /* chip specific s2div array */ + const unsigned char *idx2s; /* chip specific idx2s array */ +}; + +struct icst_vco { + unsigned short v; + unsigned char r; + unsigned char s; +}; + +unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco); +struct icst_vco icst_hz_to_vco(const struct icst_params *p, unsigned long freq); + +/* + * ICST307 VCO frequency must be between 6MHz and 200MHz (3.3 or 5V). + * This frequency is pre-output divider. + */ +#define ICST307_VCO_MIN 6000000 +#define ICST307_VCO_MAX 200000000 + +extern const unsigned char icst307_s2div[]; +extern const unsigned char icst307_idx2s[]; + +/* + * ICST525 VCO frequency must be between 10MHz and 200MHz (3V) or 320MHz (5V). + * This frequency is pre-output divider. + */ +#define ICST525_VCO_MIN 10000000 +#define ICST525_VCO_MAX_3V 200000000 +#define ICST525_VCO_MAX_5V 320000000 + +extern const unsigned char icst525_s2div[]; +extern const unsigned char icst525_idx2s[]; + +#endif diff --git a/arch/arm/include/asm/hardware/ioc.h b/arch/arm/include/asm/hardware/ioc.h new file mode 100644 index 00000000..1f6b8013 --- /dev/null +++ b/arch/arm/include/asm/hardware/ioc.h @@ -0,0 +1,72 @@ +/* + * arch/arm/include/asm/hardware/ioc.h + * + * Copyright (C) Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Use these macros to read/write the IOC. All it does is perform the actual + * read/write. + */ +#ifndef __ASMARM_HARDWARE_IOC_H +#define __ASMARM_HARDWARE_IOC_H + +#ifndef __ASSEMBLY__ + +/* + * We use __raw_base variants here so that we give the compiler the + * chance to keep IOC_BASE in a register. + */ +#define ioc_readb(off) __raw_readb(IOC_BASE + (off)) +#define ioc_writeb(val,off) __raw_writeb(val, IOC_BASE + (off)) + +#endif + +#define IOC_CONTROL (0x00) +#define IOC_KARTTX (0x04) +#define IOC_KARTRX (0x04) + +#define IOC_IRQSTATA (0x10) +#define IOC_IRQREQA (0x14) +#define IOC_IRQCLRA (0x14) +#define IOC_IRQMASKA (0x18) + +#define IOC_IRQSTATB (0x20) +#define IOC_IRQREQB (0x24) +#define IOC_IRQMASKB (0x28) + +#define IOC_FIQSTAT (0x30) +#define IOC_FIQREQ (0x34) +#define IOC_FIQMASK (0x38) + +#define IOC_T0CNTL (0x40) +#define IOC_T0LTCHL (0x40) +#define IOC_T0CNTH (0x44) +#define IOC_T0LTCHH (0x44) +#define IOC_T0GO (0x48) +#define IOC_T0LATCH (0x4c) + +#define IOC_T1CNTL (0x50) +#define IOC_T1LTCHL (0x50) +#define IOC_T1CNTH (0x54) +#define IOC_T1LTCHH (0x54) +#define IOC_T1GO (0x58) +#define IOC_T1LATCH (0x5c) + +#define IOC_T2CNTL (0x60) +#define IOC_T2LTCHL (0x60) +#define IOC_T2CNTH (0x64) +#define IOC_T2LTCHH (0x64) +#define IOC_T2GO (0x68) +#define IOC_T2LATCH (0x6c) + +#define IOC_T3CNTL (0x70) +#define IOC_T3LTCHL (0x70) +#define IOC_T3CNTH (0x74) +#define IOC_T3LTCHH (0x74) +#define IOC_T3GO (0x78) +#define IOC_T3LATCH (0x7c) + +#endif diff --git a/arch/arm/include/asm/hardware/iomd.h b/arch/arm/include/asm/hardware/iomd.h new file mode 100644 index 00000000..f9ee69e4 --- /dev/null +++ b/arch/arm/include/asm/hardware/iomd.h @@ -0,0 +1,185 @@ +/* + * arch/arm/include/asm/hardware/iomd.h + * + * Copyright (C) 1999 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file contains information out the IOMD ASIC used in the + * Acorn RiscPC and subsequently integrated into the CLPS7500 chips. + */ +#ifndef __ASMARM_HARDWARE_IOMD_H +#define __ASMARM_HARDWARE_IOMD_H + + +#ifndef __ASSEMBLY__ + +/* + * We use __raw_base variants here so that we give the compiler the + * chance to keep IOC_BASE in a register. + */ +#define iomd_readb(off) __raw_readb(IOMD_BASE + (off)) +#define iomd_readl(off) __raw_readl(IOMD_BASE + (off)) +#define iomd_writeb(val,off) __raw_writeb(val, IOMD_BASE + (off)) +#define iomd_writel(val,off) __raw_writel(val, IOMD_BASE + (off)) + +#endif + +#define IOMD_CONTROL (0x000) +#define IOMD_KARTTX (0x004) +#define IOMD_KARTRX (0x004) +#define IOMD_KCTRL (0x008) + +#define IOMD_IRQSTATA (0x010) +#define IOMD_IRQREQA (0x014) +#define IOMD_IRQCLRA (0x014) +#define IOMD_IRQMASKA (0x018) + +#define IOMD_IRQSTATB (0x020) +#define IOMD_IRQREQB (0x024) +#define IOMD_IRQMASKB (0x028) + +#define IOMD_FIQSTAT (0x030) +#define IOMD_FIQREQ (0x034) +#define IOMD_FIQMASK (0x038) + +#define IOMD_T0CNTL (0x040) +#define IOMD_T0LTCHL (0x040) +#define IOMD_T0CNTH (0x044) +#define IOMD_T0LTCHH (0x044) +#define IOMD_T0GO (0x048) +#define IOMD_T0LATCH (0x04c) + +#define IOMD_T1CNTL (0x050) +#define IOMD_T1LTCHL (0x050) +#define IOMD_T1CNTH (0x054) +#define IOMD_T1LTCHH (0x054) +#define IOMD_T1GO (0x058) +#define IOMD_T1LATCH (0x05c) + +#define IOMD_ROMCR0 (0x080) +#define IOMD_ROMCR1 (0x084) +#ifdef CONFIG_ARCH_RPC +#define IOMD_DRAMCR (0x088) +#endif +#define IOMD_REFCR (0x08C) + +#define IOMD_FSIZE (0x090) +#define IOMD_ID0 (0x094) +#define IOMD_ID1 (0x098) +#define IOMD_VERSION (0x09C) + +#ifdef CONFIG_ARCH_RPC +#define IOMD_MOUSEX (0x0A0) +#define IOMD_MOUSEY (0x0A4) +#endif + +#ifdef CONFIG_ARCH_RPC +#define IOMD_DMATCR (0x0C0) +#endif +#define IOMD_IOTCR (0x0C4) +#define IOMD_ECTCR (0x0C8) +#ifdef CONFIG_ARCH_RPC +#define IOMD_DMAEXT (0x0CC) +#endif + +#ifdef CONFIG_ARCH_RPC +#define DMA_EXT_IO0 1 +#define DMA_EXT_IO1 2 +#define DMA_EXT_IO2 4 +#define DMA_EXT_IO3 8 + +#define IOMD_IO0CURA (0x100) +#define IOMD_IO0ENDA (0x104) +#define IOMD_IO0CURB (0x108) +#define IOMD_IO0ENDB (0x10C) +#define IOMD_IO0CR (0x110) +#define IOMD_IO0ST (0x114) + +#define IOMD_IO1CURA (0x120) +#define IOMD_IO1ENDA (0x124) +#define IOMD_IO1CURB (0x128) +#define IOMD_IO1ENDB (0x12C) +#define IOMD_IO1CR (0x130) +#define IOMD_IO1ST (0x134) + +#define IOMD_IO2CURA (0x140) +#define IOMD_IO2ENDA (0x144) +#define IOMD_IO2CURB (0x148) +#define IOMD_IO2ENDB (0x14C) +#define IOMD_IO2CR (0x150) +#define IOMD_IO2ST (0x154) + +#define IOMD_IO3CURA (0x160) +#define IOMD_IO3ENDA (0x164) +#define IOMD_IO3CURB (0x168) +#define IOMD_IO3ENDB (0x16C) +#define IOMD_IO3CR (0x170) +#define IOMD_IO3ST (0x174) +#endif + +#define IOMD_SD0CURA (0x180) +#define IOMD_SD0ENDA (0x184) +#define IOMD_SD0CURB (0x188) +#define IOMD_SD0ENDB (0x18C) +#define IOMD_SD0CR (0x190) +#define IOMD_SD0ST (0x194) + +#ifdef CONFIG_ARCH_RPC +#define IOMD_SD1CURA (0x1A0) +#define IOMD_SD1ENDA (0x1A4) +#define IOMD_SD1CURB (0x1A8) +#define IOMD_SD1ENDB (0x1AC) +#define IOMD_SD1CR (0x1B0) +#define IOMD_SD1ST (0x1B4) +#endif + +#define IOMD_CURSCUR (0x1C0) +#define IOMD_CURSINIT (0x1C4) + +#define IOMD_VIDCUR (0x1D0) +#define IOMD_VIDEND (0x1D4) +#define IOMD_VIDSTART (0x1D8) +#define IOMD_VIDINIT (0x1DC) +#define IOMD_VIDCR (0x1E0) + +#define IOMD_DMASTAT (0x1F0) +#define IOMD_DMAREQ (0x1F4) +#define IOMD_DMAMASK (0x1F8) + +#define DMA_END_S (1 << 31) +#define DMA_END_L (1 << 30) + +#define DMA_CR_C 0x80 +#define DMA_CR_D 0x40 +#define DMA_CR_E 0x20 + +#define DMA_ST_OFL 4 +#define DMA_ST_INT 2 +#define DMA_ST_AB 1 + +/* + * DMA (MEMC) compatibility + */ +#define HALF_SAM vram_half_sam +#define VDMA_ALIGNMENT (HALF_SAM * 2) +#define VDMA_XFERSIZE (HALF_SAM) +#define VDMA_INIT IOMD_VIDINIT +#define VDMA_START IOMD_VIDSTART +#define VDMA_END IOMD_VIDEND + +#ifndef __ASSEMBLY__ +extern unsigned int vram_half_sam; +#define video_set_dma(start,end,offset) \ +do { \ + outl (SCREEN_START + start, VDMA_START); \ + outl (SCREEN_START + end - VDMA_XFERSIZE, VDMA_END); \ + if (offset >= end - VDMA_XFERSIZE) \ + offset |= 0x40000000; \ + outl (SCREEN_START + offset, VDMA_INIT); \ +} while (0) +#endif + +#endif diff --git a/arch/arm/include/asm/hardware/iop3xx-adma.h b/arch/arm/include/asm/hardware/iop3xx-adma.h new file mode 100644 index 00000000..9b28f124 --- /dev/null +++ b/arch/arm/include/asm/hardware/iop3xx-adma.h @@ -0,0 +1,962 @@ +/* + * Copyright © 2006, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + */ +#ifndef _ADMA_H +#define _ADMA_H +#include <linux/types.h> +#include <linux/io.h> +#include <mach/hardware.h> +#include <asm/hardware/iop_adma.h> + +/* Memory copy units */ +#define DMA_CCR(chan) (chan->mmr_base + 0x0) +#define DMA_CSR(chan) (chan->mmr_base + 0x4) +#define DMA_DAR(chan) (chan->mmr_base + 0xc) +#define DMA_NDAR(chan) (chan->mmr_base + 0x10) +#define DMA_PADR(chan) (chan->mmr_base + 0x14) +#define DMA_PUADR(chan) (chan->mmr_base + 0x18) +#define DMA_LADR(chan) (chan->mmr_base + 0x1c) +#define DMA_BCR(chan) (chan->mmr_base + 0x20) +#define DMA_DCR(chan) (chan->mmr_base + 0x24) + +/* Application accelerator unit */ +#define AAU_ACR(chan) (chan->mmr_base + 0x0) +#define AAU_ASR(chan) (chan->mmr_base + 0x4) +#define AAU_ADAR(chan) (chan->mmr_base + 0x8) +#define AAU_ANDAR(chan) (chan->mmr_base + 0xc) +#define AAU_SAR(src, chan) (chan->mmr_base + (0x10 + ((src) << 2))) +#define AAU_DAR(chan) (chan->mmr_base + 0x20) +#define AAU_ABCR(chan) (chan->mmr_base + 0x24) +#define AAU_ADCR(chan) (chan->mmr_base + 0x28) +#define AAU_SAR_EDCR(src_edc) (chan->mmr_base + (0x02c + ((src_edc-4) << 2))) +#define AAU_EDCR0_IDX 8 +#define AAU_EDCR1_IDX 17 +#define AAU_EDCR2_IDX 26 + +#define DMA0_ID 0 +#define DMA1_ID 1 +#define AAU_ID 2 + +struct iop3xx_aau_desc_ctrl { + unsigned int int_en:1; + unsigned int blk1_cmd_ctrl:3; + unsigned int blk2_cmd_ctrl:3; + unsigned int blk3_cmd_ctrl:3; + unsigned int blk4_cmd_ctrl:3; + unsigned int blk5_cmd_ctrl:3; + unsigned int blk6_cmd_ctrl:3; + unsigned int blk7_cmd_ctrl:3; + unsigned int blk8_cmd_ctrl:3; + unsigned int blk_ctrl:2; + unsigned int dual_xor_en:1; + unsigned int tx_complete:1; + unsigned int zero_result_err:1; + unsigned int zero_result_en:1; + unsigned int dest_write_en:1; +}; + +struct iop3xx_aau_e_desc_ctrl { + unsigned int reserved:1; + unsigned int blk1_cmd_ctrl:3; + unsigned int blk2_cmd_ctrl:3; + unsigned int blk3_cmd_ctrl:3; + unsigned int blk4_cmd_ctrl:3; + unsigned int blk5_cmd_ctrl:3; + unsigned int blk6_cmd_ctrl:3; + unsigned int blk7_cmd_ctrl:3; + unsigned int blk8_cmd_ctrl:3; + unsigned int reserved2:7; +}; + +struct iop3xx_dma_desc_ctrl { + unsigned int pci_transaction:4; + unsigned int int_en:1; + unsigned int dac_cycle_en:1; + unsigned int mem_to_mem_en:1; + unsigned int crc_data_tx_en:1; + unsigned int crc_gen_en:1; + unsigned int crc_seed_dis:1; + unsigned int reserved:21; + unsigned int crc_tx_complete:1; +}; + +struct iop3xx_desc_dma { + u32 next_desc; + union { + u32 pci_src_addr; + u32 pci_dest_addr; + u32 src_addr; + }; + union { + u32 upper_pci_src_addr; + u32 upper_pci_dest_addr; + }; + union { + u32 local_pci_src_addr; + u32 local_pci_dest_addr; + u32 dest_addr; + }; + u32 byte_count; + union { + u32 desc_ctrl; + struct iop3xx_dma_desc_ctrl desc_ctrl_field; + }; + u32 crc_addr; +}; + +struct iop3xx_desc_aau { + u32 next_desc; + u32 src[4]; + u32 dest_addr; + u32 byte_count; + union { + u32 desc_ctrl; + struct iop3xx_aau_desc_ctrl desc_ctrl_field; + }; + union { + u32 src_addr; + u32 e_desc_ctrl; + struct iop3xx_aau_e_desc_ctrl e_desc_ctrl_field; + } src_edc[31]; +}; + +struct iop3xx_aau_gfmr { + unsigned int gfmr1:8; + unsigned int gfmr2:8; + unsigned int gfmr3:8; + unsigned int gfmr4:8; +}; + +struct iop3xx_desc_pq_xor { + u32 next_desc; + u32 src[3]; + union { + u32 data_mult1; + struct iop3xx_aau_gfmr data_mult1_field; + }; + u32 dest_addr; + u32 byte_count; + union { + u32 desc_ctrl; + struct iop3xx_aau_desc_ctrl desc_ctrl_field; + }; + union { + u32 src_addr; + u32 e_desc_ctrl; + struct iop3xx_aau_e_desc_ctrl e_desc_ctrl_field; + u32 data_multiplier; + struct iop3xx_aau_gfmr data_mult_field; + u32 reserved; + } src_edc_gfmr[19]; +}; + +struct iop3xx_desc_dual_xor { + u32 next_desc; + u32 src0_addr; + u32 src1_addr; + u32 h_src_addr; + u32 d_src_addr; + u32 h_dest_addr; + u32 byte_count; + union { + u32 desc_ctrl; + struct iop3xx_aau_desc_ctrl desc_ctrl_field; + }; + u32 d_dest_addr; +}; + +union iop3xx_desc { + struct iop3xx_desc_aau *aau; + struct iop3xx_desc_dma *dma; + struct iop3xx_desc_pq_xor *pq_xor; + struct iop3xx_desc_dual_xor *dual_xor; + void *ptr; +}; + +/* No support for p+q operations */ +static inline int +iop_chan_pq_slot_count(size_t len, int src_cnt, int *slots_per_op) +{ + BUG(); + return 0; +} + +static inline void +iop_desc_init_pq(struct iop_adma_desc_slot *desc, int src_cnt, + unsigned long flags) +{ + BUG(); +} + +static inline void +iop_desc_set_pq_addr(struct iop_adma_desc_slot *desc, dma_addr_t *addr) +{ + BUG(); +} + +static inline void +iop_desc_set_pq_src_addr(struct iop_adma_desc_slot *desc, int src_idx, + dma_addr_t addr, unsigned char coef) +{ + BUG(); +} + +static inline int +iop_chan_pq_zero_sum_slot_count(size_t len, int src_cnt, int *slots_per_op) +{ + BUG(); + return 0; +} + +static inline void +iop_desc_init_pq_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt, + unsigned long flags) +{ + BUG(); +} + +static inline void +iop_desc_set_pq_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len) +{ + BUG(); +} + +#define iop_desc_set_pq_zero_sum_src_addr iop_desc_set_pq_src_addr + +static inline void +iop_desc_set_pq_zero_sum_addr(struct iop_adma_desc_slot *desc, int pq_idx, + dma_addr_t *src) +{ + BUG(); +} + +static inline int iop_adma_get_max_xor(void) +{ + return 32; +} + +static inline int iop_adma_get_max_pq(void) +{ + BUG(); + return 0; +} + +static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan) +{ + int id = chan->device->id; + + switch (id) { + case DMA0_ID: + case DMA1_ID: + return __raw_readl(DMA_DAR(chan)); + case AAU_ID: + return __raw_readl(AAU_ADAR(chan)); + default: + BUG(); + } + return 0; +} + +static inline void iop_chan_set_next_descriptor(struct iop_adma_chan *chan, + u32 next_desc_addr) +{ + int id = chan->device->id; + + switch (id) { + case DMA0_ID: + case DMA1_ID: + __raw_writel(next_desc_addr, DMA_NDAR(chan)); + break; + case AAU_ID: + __raw_writel(next_desc_addr, AAU_ANDAR(chan)); + break; + } + +} + +#define IOP_ADMA_STATUS_BUSY (1 << 10) +#define IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT (1024) +#define IOP_ADMA_XOR_MAX_BYTE_COUNT (16 * 1024 * 1024) +#define IOP_ADMA_MAX_BYTE_COUNT (16 * 1024 * 1024) + +static inline int iop_chan_is_busy(struct iop_adma_chan *chan) +{ + u32 status = __raw_readl(DMA_CSR(chan)); + return (status & IOP_ADMA_STATUS_BUSY) ? 1 : 0; +} + +static inline int iop_desc_is_aligned(struct iop_adma_desc_slot *desc, + int num_slots) +{ + /* num_slots will only ever be 1, 2, 4, or 8 */ + return (desc->idx & (num_slots - 1)) ? 0 : 1; +} + +/* to do: support large (i.e. > hw max) buffer sizes */ +static inline int iop_chan_memcpy_slot_count(size_t len, int *slots_per_op) +{ + *slots_per_op = 1; + return 1; +} + +/* to do: support large (i.e. > hw max) buffer sizes */ +static inline int iop_chan_memset_slot_count(size_t len, int *slots_per_op) +{ + *slots_per_op = 1; + return 1; +} + +static inline int iop3xx_aau_xor_slot_count(size_t len, int src_cnt, + int *slots_per_op) +{ + static const char slot_count_table[] = { + 1, 1, 1, 1, /* 01 - 04 */ + 2, 2, 2, 2, /* 05 - 08 */ + 4, 4, 4, 4, /* 09 - 12 */ + 4, 4, 4, 4, /* 13 - 16 */ + 8, 8, 8, 8, /* 17 - 20 */ + 8, 8, 8, 8, /* 21 - 24 */ + 8, 8, 8, 8, /* 25 - 28 */ + 8, 8, 8, 8, /* 29 - 32 */ + }; + *slots_per_op = slot_count_table[src_cnt - 1]; + return *slots_per_op; +} + +static inline int +iop_chan_interrupt_slot_count(int *slots_per_op, struct iop_adma_chan *chan) +{ + switch (chan->device->id) { + case DMA0_ID: + case DMA1_ID: + return iop_chan_memcpy_slot_count(0, slots_per_op); + case AAU_ID: + return iop3xx_aau_xor_slot_count(0, 2, slots_per_op); + default: + BUG(); + } + return 0; +} + +static inline int iop_chan_xor_slot_count(size_t len, int src_cnt, + int *slots_per_op) +{ + int slot_cnt = iop3xx_aau_xor_slot_count(len, src_cnt, slots_per_op); + + if (len <= IOP_ADMA_XOR_MAX_BYTE_COUNT) + return slot_cnt; + + len -= IOP_ADMA_XOR_MAX_BYTE_COUNT; + while (len > IOP_ADMA_XOR_MAX_BYTE_COUNT) { + len -= IOP_ADMA_XOR_MAX_BYTE_COUNT; + slot_cnt += *slots_per_op; + } + + slot_cnt += *slots_per_op; + + return slot_cnt; +} + +/* zero sum on iop3xx is limited to 1k at a time so it requires multiple + * descriptors + */ +static inline int iop_chan_zero_sum_slot_count(size_t len, int src_cnt, + int *slots_per_op) +{ + int slot_cnt = iop3xx_aau_xor_slot_count(len, src_cnt, slots_per_op); + + if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) + return slot_cnt; + + len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT; + while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) { + len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT; + slot_cnt += *slots_per_op; + } + + slot_cnt += *slots_per_op; + + return slot_cnt; +} + +static inline int iop_desc_is_pq(struct iop_adma_desc_slot *desc) +{ + return 0; +} + +static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc, + struct iop_adma_chan *chan) +{ + union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; + + switch (chan->device->id) { + case DMA0_ID: + case DMA1_ID: + return hw_desc.dma->dest_addr; + case AAU_ID: + return hw_desc.aau->dest_addr; + default: + BUG(); + } + return 0; +} + + +static inline u32 iop_desc_get_qdest_addr(struct iop_adma_desc_slot *desc, + struct iop_adma_chan *chan) +{ + BUG(); + return 0; +} + +static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc, + struct iop_adma_chan *chan) +{ + union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; + + switch (chan->device->id) { + case DMA0_ID: + case DMA1_ID: + return hw_desc.dma->byte_count; + case AAU_ID: + return hw_desc.aau->byte_count; + default: + BUG(); + } + return 0; +} + +/* translate the src_idx to a descriptor word index */ +static inline int __desc_idx(int src_idx) +{ + static const int desc_idx_table[] = { 0, 0, 0, 0, + 0, 1, 2, 3, + 5, 6, 7, 8, + 9, 10, 11, 12, + 14, 15, 16, 17, + 18, 19, 20, 21, + 23, 24, 25, 26, + 27, 28, 29, 30, + }; + + return desc_idx_table[src_idx]; +} + +static inline u32 iop_desc_get_src_addr(struct iop_adma_desc_slot *desc, + struct iop_adma_chan *chan, + int src_idx) +{ + union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; + + switch (chan->device->id) { + case DMA0_ID: + case DMA1_ID: + return hw_desc.dma->src_addr; + case AAU_ID: + break; + default: + BUG(); + } + + if (src_idx < 4) + return hw_desc.aau->src[src_idx]; + else + return hw_desc.aau->src_edc[__desc_idx(src_idx)].src_addr; +} + +static inline void iop3xx_aau_desc_set_src_addr(struct iop3xx_desc_aau *hw_desc, + int src_idx, dma_addr_t addr) +{ + if (src_idx < 4) + hw_desc->src[src_idx] = addr; + else + hw_desc->src_edc[__desc_idx(src_idx)].src_addr = addr; +} + +static inline void +iop_desc_init_memcpy(struct iop_adma_desc_slot *desc, unsigned long flags) +{ + struct iop3xx_desc_dma *hw_desc = desc->hw_desc; + union { + u32 value; + struct iop3xx_dma_desc_ctrl field; + } u_desc_ctrl; + + u_desc_ctrl.value = 0; + u_desc_ctrl.field.mem_to_mem_en = 1; + u_desc_ctrl.field.pci_transaction = 0xe; /* memory read block */ + u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; + hw_desc->desc_ctrl = u_desc_ctrl.value; + hw_desc->upper_pci_src_addr = 0; + hw_desc->crc_addr = 0; +} + +static inline void +iop_desc_init_memset(struct iop_adma_desc_slot *desc, unsigned long flags) +{ + struct iop3xx_desc_aau *hw_desc = desc->hw_desc; + union { + u32 value; + struct iop3xx_aau_desc_ctrl field; + } u_desc_ctrl; + + u_desc_ctrl.value = 0; + u_desc_ctrl.field.blk1_cmd_ctrl = 0x2; /* memory block fill */ + u_desc_ctrl.field.dest_write_en = 1; + u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; + hw_desc->desc_ctrl = u_desc_ctrl.value; +} + +static inline u32 +iop3xx_desc_init_xor(struct iop3xx_desc_aau *hw_desc, int src_cnt, + unsigned long flags) +{ + int i, shift; + u32 edcr; + union { + u32 value; + struct iop3xx_aau_desc_ctrl field; + } u_desc_ctrl; + + u_desc_ctrl.value = 0; + switch (src_cnt) { + case 25 ... 32: + u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */ + edcr = 0; + shift = 1; + for (i = 24; i < src_cnt; i++) { + edcr |= (1 << shift); + shift += 3; + } + hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = edcr; + src_cnt = 24; + /* fall through */ + case 17 ... 24: + if (!u_desc_ctrl.field.blk_ctrl) { + hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0; + u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */ + } + edcr = 0; + shift = 1; + for (i = 16; i < src_cnt; i++) { + edcr |= (1 << shift); + shift += 3; + } + hw_desc->src_edc[AAU_EDCR1_IDX].e_desc_ctrl = edcr; + src_cnt = 16; + /* fall through */ + case 9 ... 16: + if (!u_desc_ctrl.field.blk_ctrl) + u_desc_ctrl.field.blk_ctrl = 0x2; /* use EDCR0 */ + edcr = 0; + shift = 1; + for (i = 8; i < src_cnt; i++) { + edcr |= (1 << shift); + shift += 3; + } + hw_desc->src_edc[AAU_EDCR0_IDX].e_desc_ctrl = edcr; + src_cnt = 8; + /* fall through */ + case 2 ... 8: + shift = 1; + for (i = 0; i < src_cnt; i++) { + u_desc_ctrl.value |= (1 << shift); + shift += 3; + } + + if (!u_desc_ctrl.field.blk_ctrl && src_cnt > 4) + u_desc_ctrl.field.blk_ctrl = 0x1; /* use mini-desc */ + } + + u_desc_ctrl.field.dest_write_en = 1; + u_desc_ctrl.field.blk1_cmd_ctrl = 0x7; /* direct fill */ + u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; + hw_desc->desc_ctrl = u_desc_ctrl.value; + + return u_desc_ctrl.value; +} + +static inline void +iop_desc_init_xor(struct iop_adma_desc_slot *desc, int src_cnt, + unsigned long flags) +{ + iop3xx_desc_init_xor(desc->hw_desc, src_cnt, flags); +} + +/* return the number of operations */ +static inline int +iop_desc_init_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt, + unsigned long flags) +{ + int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op; + struct iop3xx_desc_aau *hw_desc, *prev_hw_desc, *iter; + union { + u32 value; + struct iop3xx_aau_desc_ctrl field; + } u_desc_ctrl; + int i, j; + + hw_desc = desc->hw_desc; + + for (i = 0, j = 0; (slot_cnt -= slots_per_op) >= 0; + i += slots_per_op, j++) { + iter = iop_hw_desc_slot_idx(hw_desc, i); + u_desc_ctrl.value = iop3xx_desc_init_xor(iter, src_cnt, flags); + u_desc_ctrl.field.dest_write_en = 0; + u_desc_ctrl.field.zero_result_en = 1; + u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; + iter->desc_ctrl = u_desc_ctrl.value; + + /* for the subsequent descriptors preserve the store queue + * and chain them together + */ + if (i) { + prev_hw_desc = + iop_hw_desc_slot_idx(hw_desc, i - slots_per_op); + prev_hw_desc->next_desc = + (u32) (desc->async_tx.phys + (i << 5)); + } + } + + return j; +} + +static inline void +iop_desc_init_null_xor(struct iop_adma_desc_slot *desc, int src_cnt, + unsigned long flags) +{ + struct iop3xx_desc_aau *hw_desc = desc->hw_desc; + union { + u32 value; + struct iop3xx_aau_desc_ctrl field; + } u_desc_ctrl; + + u_desc_ctrl.value = 0; + switch (src_cnt) { + case 25 ... 32: + u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */ + hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0; + /* fall through */ + case 17 ... 24: + if (!u_desc_ctrl.field.blk_ctrl) { + hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0; + u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */ + } + hw_desc->src_edc[AAU_EDCR1_IDX].e_desc_ctrl = 0; + /* fall through */ + case 9 ... 16: + if (!u_desc_ctrl.field.blk_ctrl) + u_desc_ctrl.field.blk_ctrl = 0x2; /* use EDCR0 */ + hw_desc->src_edc[AAU_EDCR0_IDX].e_desc_ctrl = 0; + /* fall through */ + case 1 ... 8: + if (!u_desc_ctrl.field.blk_ctrl && src_cnt > 4) + u_desc_ctrl.field.blk_ctrl = 0x1; /* use mini-desc */ + } + + u_desc_ctrl.field.dest_write_en = 0; + u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; + hw_desc->desc_ctrl = u_desc_ctrl.value; +} + +static inline void iop_desc_set_byte_count(struct iop_adma_desc_slot *desc, + struct iop_adma_chan *chan, + u32 byte_count) +{ + union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; + + switch (chan->device->id) { + case DMA0_ID: + case DMA1_ID: + hw_desc.dma->byte_count = byte_count; + break; + case AAU_ID: + hw_desc.aau->byte_count = byte_count; + break; + default: + BUG(); + } +} + +static inline void +iop_desc_init_interrupt(struct iop_adma_desc_slot *desc, + struct iop_adma_chan *chan) +{ + union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; + + switch (chan->device->id) { + case DMA0_ID: + case DMA1_ID: + iop_desc_init_memcpy(desc, 1); + hw_desc.dma->byte_count = 0; + hw_desc.dma->dest_addr = 0; + hw_desc.dma->src_addr = 0; + break; + case AAU_ID: + iop_desc_init_null_xor(desc, 2, 1); + hw_desc.aau->byte_count = 0; + hw_desc.aau->dest_addr = 0; + hw_desc.aau->src[0] = 0; + hw_desc.aau->src[1] = 0; + break; + default: + BUG(); + } +} + +static inline void +iop_desc_set_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len) +{ + int slots_per_op = desc->slots_per_op; + struct iop3xx_desc_aau *hw_desc = desc->hw_desc, *iter; + int i = 0; + + if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) { + hw_desc->byte_count = len; + } else { + do { + iter = iop_hw_desc_slot_idx(hw_desc, i); + iter->byte_count = IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT; + len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT; + i += slots_per_op; + } while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT); + + iter = iop_hw_desc_slot_idx(hw_desc, i); + iter->byte_count = len; + } +} + +static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc, + struct iop_adma_chan *chan, + dma_addr_t addr) +{ + union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; + + switch (chan->device->id) { + case DMA0_ID: + case DMA1_ID: + hw_desc.dma->dest_addr = addr; + break; + case AAU_ID: + hw_desc.aau->dest_addr = addr; + break; + default: + BUG(); + } +} + +static inline void iop_desc_set_memcpy_src_addr(struct iop_adma_desc_slot *desc, + dma_addr_t addr) +{ + struct iop3xx_desc_dma *hw_desc = desc->hw_desc; + hw_desc->src_addr = addr; +} + +static inline void +iop_desc_set_zero_sum_src_addr(struct iop_adma_desc_slot *desc, int src_idx, + dma_addr_t addr) +{ + + struct iop3xx_desc_aau *hw_desc = desc->hw_desc, *iter; + int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op; + int i; + + for (i = 0; (slot_cnt -= slots_per_op) >= 0; + i += slots_per_op, addr += IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) { + iter = iop_hw_desc_slot_idx(hw_desc, i); + iop3xx_aau_desc_set_src_addr(iter, src_idx, addr); + } +} + +static inline void iop_desc_set_xor_src_addr(struct iop_adma_desc_slot *desc, + int src_idx, dma_addr_t addr) +{ + + struct iop3xx_desc_aau *hw_desc = desc->hw_desc, *iter; + int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op; + int i; + + for (i = 0; (slot_cnt -= slots_per_op) >= 0; + i += slots_per_op, addr += IOP_ADMA_XOR_MAX_BYTE_COUNT) { + iter = iop_hw_desc_slot_idx(hw_desc, i); + iop3xx_aau_desc_set_src_addr(iter, src_idx, addr); + } +} + +static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc, + u32 next_desc_addr) +{ + /* hw_desc->next_desc is the same location for all channels */ + union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; + + iop_paranoia(hw_desc.dma->next_desc); + hw_desc.dma->next_desc = next_desc_addr; +} + +static inline u32 iop_desc_get_next_desc(struct iop_adma_desc_slot *desc) +{ + /* hw_desc->next_desc is the same location for all channels */ + union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; + return hw_desc.dma->next_desc; +} + +static inline void iop_desc_clear_next_desc(struct iop_adma_desc_slot *desc) +{ + /* hw_desc->next_desc is the same location for all channels */ + union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; + hw_desc.dma->next_desc = 0; +} + +static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc, + u32 val) +{ + struct iop3xx_desc_aau *hw_desc = desc->hw_desc; + hw_desc->src[0] = val; +} + +static inline enum sum_check_flags +iop_desc_get_zero_result(struct iop_adma_desc_slot *desc) +{ + struct iop3xx_desc_aau *hw_desc = desc->hw_desc; + struct iop3xx_aau_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field; + + iop_paranoia(!(desc_ctrl.tx_complete && desc_ctrl.zero_result_en)); + return desc_ctrl.zero_result_err << SUM_CHECK_P; +} + +static inline void iop_chan_append(struct iop_adma_chan *chan) +{ + u32 dma_chan_ctrl; + + dma_chan_ctrl = __raw_readl(DMA_CCR(chan)); + dma_chan_ctrl |= 0x2; + __raw_writel(dma_chan_ctrl, DMA_CCR(chan)); +} + +static inline u32 iop_chan_get_status(struct iop_adma_chan *chan) +{ + return __raw_readl(DMA_CSR(chan)); +} + +static inline void iop_chan_disable(struct iop_adma_chan *chan) +{ + u32 dma_chan_ctrl = __raw_readl(DMA_CCR(chan)); + dma_chan_ctrl &= ~1; + __raw_writel(dma_chan_ctrl, DMA_CCR(chan)); +} + +static inline void iop_chan_enable(struct iop_adma_chan *chan) +{ + u32 dma_chan_ctrl = __raw_readl(DMA_CCR(chan)); + + dma_chan_ctrl |= 1; + __raw_writel(dma_chan_ctrl, DMA_CCR(chan)); +} + +static inline void iop_adma_device_clear_eot_status(struct iop_adma_chan *chan) +{ + u32 status = __raw_readl(DMA_CSR(chan)); + status &= (1 << 9); + __raw_writel(status, DMA_CSR(chan)); +} + +static inline void iop_adma_device_clear_eoc_status(struct iop_adma_chan *chan) +{ + u32 status = __raw_readl(DMA_CSR(chan)); + status &= (1 << 8); + __raw_writel(status, DMA_CSR(chan)); +} + +static inline void iop_adma_device_clear_err_status(struct iop_adma_chan *chan) +{ + u32 status = __raw_readl(DMA_CSR(chan)); + + switch (chan->device->id) { + case DMA0_ID: + case DMA1_ID: + status &= (1 << 5) | (1 << 3) | (1 << 2) | (1 << 1); + break; + case AAU_ID: + status &= (1 << 5); + break; + default: + BUG(); + } + + __raw_writel(status, DMA_CSR(chan)); +} + +static inline int +iop_is_err_int_parity(unsigned long status, struct iop_adma_chan *chan) +{ + return 0; +} + +static inline int +iop_is_err_mcu_abort(unsigned long status, struct iop_adma_chan *chan) +{ + return 0; +} + +static inline int +iop_is_err_int_tabort(unsigned long status, struct iop_adma_chan *chan) +{ + return 0; +} + +static inline int +iop_is_err_int_mabort(unsigned long status, struct iop_adma_chan *chan) +{ + return test_bit(5, &status); +} + +static inline int +iop_is_err_pci_tabort(unsigned long status, struct iop_adma_chan *chan) +{ + switch (chan->device->id) { + case DMA0_ID: + case DMA1_ID: + return test_bit(2, &status); + default: + return 0; + } +} + +static inline int +iop_is_err_pci_mabort(unsigned long status, struct iop_adma_chan *chan) +{ + switch (chan->device->id) { + case DMA0_ID: + case DMA1_ID: + return test_bit(3, &status); + default: + return 0; + } +} + +static inline int +iop_is_err_split_tx(unsigned long status, struct iop_adma_chan *chan) +{ + switch (chan->device->id) { + case DMA0_ID: + case DMA1_ID: + return test_bit(1, &status); + default: + return 0; + } +} +#endif /* _ADMA_H */ diff --git a/arch/arm/include/asm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h new file mode 100644 index 00000000..b69d972b --- /dev/null +++ b/arch/arm/include/asm/hardware/iop3xx-gpio.h @@ -0,0 +1,73 @@ +/* + * arch/arm/include/asm/hardware/iop3xx-gpio.h + * + * IOP3xx GPIO wrappers + * + * Copyright (c) 2008 Arnaud Patard <arnaud.patard@rtp-net.org> + * Based on IXP4XX gpio.h file + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARM_HARDWARE_IOP3XX_GPIO_H +#define __ASM_ARM_HARDWARE_IOP3XX_GPIO_H + +#include <mach/hardware.h> +#include <asm-generic/gpio.h> + +#define IOP3XX_N_GPIOS 8 + +static inline int gpio_get_value(unsigned gpio) +{ + if (gpio > IOP3XX_N_GPIOS) + return __gpio_get_value(gpio); + + return gpio_line_get(gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + if (gpio > IOP3XX_N_GPIOS) { + __gpio_set_value(gpio, value); + return; + } + gpio_line_set(gpio, value); +} + +static inline int gpio_cansleep(unsigned gpio) +{ + if (gpio < IOP3XX_N_GPIOS) + return 0; + else + return __gpio_cansleep(gpio); +} + +/* + * The GPIOs are not generating any interrupt + * Note : manuals are not clear about this + */ +static inline int gpio_to_irq(int gpio) +{ + return -EINVAL; +} + +static inline int irq_to_gpio(int gpio) +{ + return -EINVAL; +} + +#endif + diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h new file mode 100644 index 00000000..5daea296 --- /dev/null +++ b/arch/arm/include/asm/hardware/iop3xx.h @@ -0,0 +1,329 @@ +/* + * arch/arm/include/asm/hardware/iop3xx.h + * + * Intel IOP32X and IOP33X register definitions + * + * Author: Rory Bolt <rorybolt@pacbell.net> + * Copyright (C) 2002 Rory Bolt + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __IOP3XX_H +#define __IOP3XX_H + +/* + * IOP3XX GPIO handling + */ +#define GPIO_IN 0 +#define GPIO_OUT 1 +#define GPIO_LOW 0 +#define GPIO_HIGH 1 +#define IOP3XX_GPIO_LINE(x) (x) + +#ifndef __ASSEMBLY__ +extern void gpio_line_config(int line, int direction); +extern int gpio_line_get(int line); +extern void gpio_line_set(int line, int value); +extern int init_atu; +extern int iop3xx_get_init_atu(void); +#endif + + +/* + * IOP3XX processor registers + */ +#define IOP3XX_PERIPHERAL_PHYS_BASE 0xffffe000 +#define IOP3XX_PERIPHERAL_VIRT_BASE 0xfeffe000 +#define IOP3XX_PERIPHERAL_SIZE 0x00002000 +#define IOP3XX_PERIPHERAL_UPPER_PA (IOP3XX_PERIPHERAL_PHYS_BASE +\ + IOP3XX_PERIPHERAL_SIZE - 1) +#define IOP3XX_PERIPHERAL_UPPER_VA (IOP3XX_PERIPHERAL_VIRT_BASE +\ + IOP3XX_PERIPHERAL_SIZE - 1) +#define IOP3XX_PMMR_PHYS_TO_VIRT(addr) (u32) ((u32) (addr) -\ + (IOP3XX_PERIPHERAL_PHYS_BASE\ + - IOP3XX_PERIPHERAL_VIRT_BASE)) +#define IOP3XX_REG_ADDR(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + (reg)) + +/* Address Translation Unit */ +#define IOP3XX_ATUVID (volatile u16 *)IOP3XX_REG_ADDR(0x0100) +#define IOP3XX_ATUDID (volatile u16 *)IOP3XX_REG_ADDR(0x0102) +#define IOP3XX_ATUCMD (volatile u16 *)IOP3XX_REG_ADDR(0x0104) +#define IOP3XX_ATUSR (volatile u16 *)IOP3XX_REG_ADDR(0x0106) +#define IOP3XX_ATURID (volatile u8 *)IOP3XX_REG_ADDR(0x0108) +#define IOP3XX_ATUCCR (volatile u32 *)IOP3XX_REG_ADDR(0x0109) +#define IOP3XX_ATUCLSR (volatile u8 *)IOP3XX_REG_ADDR(0x010c) +#define IOP3XX_ATULT (volatile u8 *)IOP3XX_REG_ADDR(0x010d) +#define IOP3XX_ATUHTR (volatile u8 *)IOP3XX_REG_ADDR(0x010e) +#define IOP3XX_ATUBIST (volatile u8 *)IOP3XX_REG_ADDR(0x010f) +#define IOP3XX_IABAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0110) +#define IOP3XX_IAUBAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0114) +#define IOP3XX_IABAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0118) +#define IOP3XX_IAUBAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x011c) +#define IOP3XX_IABAR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0120) +#define IOP3XX_IAUBAR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0124) +#define IOP3XX_ASVIR (volatile u16 *)IOP3XX_REG_ADDR(0x012c) +#define IOP3XX_ASIR (volatile u16 *)IOP3XX_REG_ADDR(0x012e) +#define IOP3XX_ERBAR (volatile u32 *)IOP3XX_REG_ADDR(0x0130) +#define IOP3XX_ATUILR (volatile u8 *)IOP3XX_REG_ADDR(0x013c) +#define IOP3XX_ATUIPR (volatile u8 *)IOP3XX_REG_ADDR(0x013d) +#define IOP3XX_ATUMGNT (volatile u8 *)IOP3XX_REG_ADDR(0x013e) +#define IOP3XX_ATUMLAT (volatile u8 *)IOP3XX_REG_ADDR(0x013f) +#define IOP3XX_IALR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0140) +#define IOP3XX_IATVR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0144) +#define IOP3XX_ERLR (volatile u32 *)IOP3XX_REG_ADDR(0x0148) +#define IOP3XX_ERTVR (volatile u32 *)IOP3XX_REG_ADDR(0x014c) +#define IOP3XX_IALR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0150) +#define IOP3XX_IALR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0154) +#define IOP3XX_IATVR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0158) +#define IOP3XX_OIOWTVR (volatile u32 *)IOP3XX_REG_ADDR(0x015c) +#define IOP3XX_OMWTVR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0160) +#define IOP3XX_OUMWTVR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0164) +#define IOP3XX_OMWTVR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0168) +#define IOP3XX_OUMWTVR1 (volatile u32 *)IOP3XX_REG_ADDR(0x016c) +#define IOP3XX_OUDWTVR (volatile u32 *)IOP3XX_REG_ADDR(0x0178) +#define IOP3XX_ATUCR (volatile u32 *)IOP3XX_REG_ADDR(0x0180) +#define IOP3XX_PCSR (volatile u32 *)IOP3XX_REG_ADDR(0x0184) +#define IOP3XX_ATUISR (volatile u32 *)IOP3XX_REG_ADDR(0x0188) +#define IOP3XX_ATUIMR (volatile u32 *)IOP3XX_REG_ADDR(0x018c) +#define IOP3XX_IABAR3 (volatile u32 *)IOP3XX_REG_ADDR(0x0190) +#define IOP3XX_IAUBAR3 (volatile u32 *)IOP3XX_REG_ADDR(0x0194) +#define IOP3XX_IALR3 (volatile u32 *)IOP3XX_REG_ADDR(0x0198) +#define IOP3XX_IATVR3 (volatile u32 *)IOP3XX_REG_ADDR(0x019c) +#define IOP3XX_OCCAR (volatile u32 *)IOP3XX_REG_ADDR(0x01a4) +#define IOP3XX_OCCDR (volatile u32 *)IOP3XX_REG_ADDR(0x01ac) +#define IOP3XX_PDSCR (volatile u32 *)IOP3XX_REG_ADDR(0x01bc) +#define IOP3XX_PMCAPID (volatile u8 *)IOP3XX_REG_ADDR(0x01c0) +#define IOP3XX_PMNEXT (volatile u8 *)IOP3XX_REG_ADDR(0x01c1) +#define IOP3XX_APMCR (volatile u16 *)IOP3XX_REG_ADDR(0x01c2) +#define IOP3XX_APMCSR (volatile u16 *)IOP3XX_REG_ADDR(0x01c4) +#define IOP3XX_PCIXCAPID (volatile u8 *)IOP3XX_REG_ADDR(0x01e0) +#define IOP3XX_PCIXNEXT (volatile u8 *)IOP3XX_REG_ADDR(0x01e1) +#define IOP3XX_PCIXCMD (volatile u16 *)IOP3XX_REG_ADDR(0x01e2) +#define IOP3XX_PCIXSR (volatile u32 *)IOP3XX_REG_ADDR(0x01e4) +#define IOP3XX_PCIIRSR (volatile u32 *)IOP3XX_REG_ADDR(0x01ec) +#define IOP3XX_PCSR_OUT_Q_BUSY (1 << 15) +#define IOP3XX_PCSR_IN_Q_BUSY (1 << 14) +#define IOP3XX_ATUCR_OUT_EN (1 << 1) + +#define IOP3XX_INIT_ATU_DEFAULT 0 +#define IOP3XX_INIT_ATU_DISABLE -1 +#define IOP3XX_INIT_ATU_ENABLE 1 + +/* Messaging Unit */ +#define IOP3XX_IMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0310) +#define IOP3XX_IMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0314) +#define IOP3XX_OMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0318) +#define IOP3XX_OMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x031c) +#define IOP3XX_IDR (volatile u32 *)IOP3XX_REG_ADDR(0x0320) +#define IOP3XX_IISR (volatile u32 *)IOP3XX_REG_ADDR(0x0324) +#define IOP3XX_IIMR (volatile u32 *)IOP3XX_REG_ADDR(0x0328) +#define IOP3XX_ODR (volatile u32 *)IOP3XX_REG_ADDR(0x032c) +#define IOP3XX_OISR (volatile u32 *)IOP3XX_REG_ADDR(0x0330) +#define IOP3XX_OIMR (volatile u32 *)IOP3XX_REG_ADDR(0x0334) +#define IOP3XX_MUCR (volatile u32 *)IOP3XX_REG_ADDR(0x0350) +#define IOP3XX_QBAR (volatile u32 *)IOP3XX_REG_ADDR(0x0354) +#define IOP3XX_IFHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0360) +#define IOP3XX_IFTPR (volatile u32 *)IOP3XX_REG_ADDR(0x0364) +#define IOP3XX_IPHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0368) +#define IOP3XX_IPTPR (volatile u32 *)IOP3XX_REG_ADDR(0x036c) +#define IOP3XX_OFHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0370) +#define IOP3XX_OFTPR (volatile u32 *)IOP3XX_REG_ADDR(0x0374) +#define IOP3XX_OPHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0378) +#define IOP3XX_OPTPR (volatile u32 *)IOP3XX_REG_ADDR(0x037c) +#define IOP3XX_IAR (volatile u32 *)IOP3XX_REG_ADDR(0x0380) + +/* DMA Controller */ +#define IOP3XX_DMA_PHYS_BASE(chan) (IOP3XX_PERIPHERAL_PHYS_BASE + \ + (0x400 + (chan << 6))) +#define IOP3XX_DMA_UPPER_PA(chan) (IOP3XX_DMA_PHYS_BASE(chan) + 0x27) + +/* Peripheral bus interface */ +#define IOP3XX_PBCR (volatile u32 *)IOP3XX_REG_ADDR(0x0680) +#define IOP3XX_PBISR (volatile u32 *)IOP3XX_REG_ADDR(0x0684) +#define IOP3XX_PBBAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0688) +#define IOP3XX_PBLR0 (volatile u32 *)IOP3XX_REG_ADDR(0x068c) +#define IOP3XX_PBBAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0690) +#define IOP3XX_PBLR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0694) +#define IOP3XX_PBBAR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0698) +#define IOP3XX_PBLR2 (volatile u32 *)IOP3XX_REG_ADDR(0x069c) +#define IOP3XX_PBBAR3 (volatile u32 *)IOP3XX_REG_ADDR(0x06a0) +#define IOP3XX_PBLR3 (volatile u32 *)IOP3XX_REG_ADDR(0x06a4) +#define IOP3XX_PBBAR4 (volatile u32 *)IOP3XX_REG_ADDR(0x06a8) +#define IOP3XX_PBLR4 (volatile u32 *)IOP3XX_REG_ADDR(0x06ac) +#define IOP3XX_PBBAR5 (volatile u32 *)IOP3XX_REG_ADDR(0x06b0) +#define IOP3XX_PBLR5 (volatile u32 *)IOP3XX_REG_ADDR(0x06b4) +#define IOP3XX_PMBR0 (volatile u32 *)IOP3XX_REG_ADDR(0x06c0) +#define IOP3XX_PMBR1 (volatile u32 *)IOP3XX_REG_ADDR(0x06e0) +#define IOP3XX_PMBR2 (volatile u32 *)IOP3XX_REG_ADDR(0x06e4) + +/* Peripheral performance monitoring unit */ +#define IOP3XX_GTMR (volatile u32 *)IOP3XX_REG_ADDR(0x0700) +#define IOP3XX_ESR (volatile u32 *)IOP3XX_REG_ADDR(0x0704) +#define IOP3XX_EMISR (volatile u32 *)IOP3XX_REG_ADDR(0x0708) +#define IOP3XX_GTSR (volatile u32 *)IOP3XX_REG_ADDR(0x0710) +/* PERCR0 DOESN'T EXIST - index from 1! */ +#define IOP3XX_PERCR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0710) + +/* General Purpose I/O */ +#define IOP3XX_GPOE (volatile u32 *)IOP3XX_GPIO_REG(0x0000) +#define IOP3XX_GPID (volatile u32 *)IOP3XX_GPIO_REG(0x0004) +#define IOP3XX_GPOD (volatile u32 *)IOP3XX_GPIO_REG(0x0008) + +/* Timers */ +#define IOP3XX_TU_TMR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0000) +#define IOP3XX_TU_TMR1 (volatile u32 *)IOP3XX_TIMER_REG(0x0004) +#define IOP3XX_TU_TCR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0008) +#define IOP3XX_TU_TCR1 (volatile u32 *)IOP3XX_TIMER_REG(0x000c) +#define IOP3XX_TU_TRR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0010) +#define IOP3XX_TU_TRR1 (volatile u32 *)IOP3XX_TIMER_REG(0x0014) +#define IOP3XX_TU_TISR (volatile u32 *)IOP3XX_TIMER_REG(0x0018) +#define IOP3XX_TU_WDTCR (volatile u32 *)IOP3XX_TIMER_REG(0x001c) +#define IOP_TMR_EN 0x02 +#define IOP_TMR_RELOAD 0x04 +#define IOP_TMR_PRIVILEGED 0x08 +#define IOP_TMR_RATIO_1_1 0x00 + +/* Watchdog timer definitions */ +#define IOP_WDTCR_EN_ARM 0x1e1e1e1e +#define IOP_WDTCR_EN 0xe1e1e1e1 +/* iop3xx does not support stopping the watchdog, so we just re-arm */ +#define IOP_WDTCR_DIS_ARM (IOP_WDTCR_EN_ARM) +#define IOP_WDTCR_DIS (IOP_WDTCR_EN) + +/* Application accelerator unit */ +#define IOP3XX_AAU_PHYS_BASE (IOP3XX_PERIPHERAL_PHYS_BASE + 0x800) +#define IOP3XX_AAU_UPPER_PA (IOP3XX_AAU_PHYS_BASE + 0xa7) + +/* I2C bus interface unit */ +#define IOP3XX_ICR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1680) +#define IOP3XX_ISR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1684) +#define IOP3XX_ISAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1688) +#define IOP3XX_IDBR0 (volatile u32 *)IOP3XX_REG_ADDR(0x168c) +#define IOP3XX_IBMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1694) +#define IOP3XX_ICR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16a0) +#define IOP3XX_ISR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16a4) +#define IOP3XX_ISAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16a8) +#define IOP3XX_IDBR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16ac) +#define IOP3XX_IBMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16b4) + + +/* + * IOP3XX I/O and Mem space regions for PCI autoconfiguration + */ +#define IOP3XX_PCI_LOWER_MEM_PA 0x80000000 +#define IOP3XX_PCI_MEM_WINDOW_SIZE 0x08000000 + +#define IOP3XX_PCI_IO_WINDOW_SIZE 0x00010000 +#define IOP3XX_PCI_LOWER_IO_PA 0x90000000 +#define IOP3XX_PCI_LOWER_IO_VA 0xfe000000 +#define IOP3XX_PCI_LOWER_IO_BA 0x90000000 +#define IOP3XX_PCI_UPPER_IO_PA (IOP3XX_PCI_LOWER_IO_PA +\ + IOP3XX_PCI_IO_WINDOW_SIZE - 1) +#define IOP3XX_PCI_UPPER_IO_VA (IOP3XX_PCI_LOWER_IO_VA +\ + IOP3XX_PCI_IO_WINDOW_SIZE - 1) +#define IOP3XX_PCI_IO_PHYS_TO_VIRT(addr) (((u32) (addr) -\ + IOP3XX_PCI_LOWER_IO_PA) +\ + IOP3XX_PCI_LOWER_IO_VA) + + +#ifndef __ASSEMBLY__ +void iop3xx_map_io(void); +void iop_init_cp6_handler(void); +void iop_init_time(unsigned long tickrate); + +static inline u32 read_tmr0(void) +{ + u32 val; + asm volatile("mrc p6, 0, %0, c0, c1, 0" : "=r" (val)); + return val; +} + +static inline void write_tmr0(u32 val) +{ + asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (val)); +} + +static inline void write_tmr1(u32 val) +{ + asm volatile("mcr p6, 0, %0, c1, c1, 0" : : "r" (val)); +} + +static inline u32 read_tcr0(void) +{ + u32 val; + asm volatile("mrc p6, 0, %0, c2, c1, 0" : "=r" (val)); + return val; +} + +static inline void write_tcr0(u32 val) +{ + asm volatile("mcr p6, 0, %0, c2, c1, 0" : : "r" (val)); +} + +static inline u32 read_tcr1(void) +{ + u32 val; + asm volatile("mrc p6, 0, %0, c3, c1, 0" : "=r" (val)); + return val; +} + +static inline void write_tcr1(u32 val) +{ + asm volatile("mcr p6, 0, %0, c3, c1, 0" : : "r" (val)); +} + +static inline void write_trr0(u32 val) +{ + asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (val)); +} + +static inline void write_trr1(u32 val) +{ + asm volatile("mcr p6, 0, %0, c5, c1, 0" : : "r" (val)); +} + +static inline void write_tisr(u32 val) +{ + asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (val)); +} + +static inline u32 read_wdtcr(void) +{ + u32 val; + asm volatile("mrc p6, 0, %0, c7, c1, 0":"=r" (val)); + return val; +} +static inline void write_wdtcr(u32 val) +{ + asm volatile("mcr p6, 0, %0, c7, c1, 0"::"r" (val)); +} + +extern unsigned long get_iop_tick_rate(void); + +/* only iop13xx has these registers, we define these to present a + * common register interface for the iop_wdt driver. + */ +#define IOP_RCSR_WDT (0) +static inline u32 read_rcsr(void) +{ + return 0; +} +static inline void write_wdtsr(u32 val) +{ + do { } while (0); +} + +extern struct platform_device iop3xx_dma_0_channel; +extern struct platform_device iop3xx_dma_1_channel; +extern struct platform_device iop3xx_aau_channel; +extern struct platform_device iop3xx_i2c0_device; +extern struct platform_device iop3xx_i2c1_device; + +#endif + + +#endif diff --git a/arch/arm/include/asm/hardware/iop_adma.h b/arch/arm/include/asm/hardware/iop_adma.h new file mode 100644 index 00000000..59b8c389 --- /dev/null +++ b/arch/arm/include/asm/hardware/iop_adma.h @@ -0,0 +1,125 @@ +/* + * Copyright © 2006, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + */ +#ifndef IOP_ADMA_H +#define IOP_ADMA_H +#include <linux/types.h> +#include <linux/dmaengine.h> +#include <linux/interrupt.h> + +#define IOP_ADMA_SLOT_SIZE 32 +#define IOP_ADMA_THRESHOLD 4 +#ifdef DEBUG +#define IOP_PARANOIA 1 +#else +#define IOP_PARANOIA 0 +#endif +#define iop_paranoia(x) BUG_ON(IOP_PARANOIA && (x)) + +/** + * struct iop_adma_device - internal representation of an ADMA device + * @pdev: Platform device + * @id: HW ADMA Device selector + * @dma_desc_pool: base of DMA descriptor region (DMA address) + * @dma_desc_pool_virt: base of DMA descriptor region (CPU address) + * @common: embedded struct dma_device + */ +struct iop_adma_device { + struct platform_device *pdev; + int id; + dma_addr_t dma_desc_pool; + void *dma_desc_pool_virt; + struct dma_device common; +}; + +/** + * struct iop_adma_chan - internal representation of an ADMA device + * @pending: allows batching of hardware operations + * @completed_cookie: identifier for the most recently completed operation + * @lock: serializes enqueue/dequeue operations to the slot pool + * @mmr_base: memory mapped register base + * @chain: device chain view of the descriptors + * @device: parent device + * @common: common dmaengine channel object members + * @last_used: place holder for allocation to continue from where it left off + * @all_slots: complete domain of slots usable by the channel + * @slots_allocated: records the actual size of the descriptor slot pool + * @irq_tasklet: bottom half where iop_adma_slot_cleanup runs + */ +struct iop_adma_chan { + int pending; + dma_cookie_t completed_cookie; + spinlock_t lock; /* protects the descriptor slot pool */ + void __iomem *mmr_base; + struct list_head chain; + struct iop_adma_device *device; + struct dma_chan common; + struct iop_adma_desc_slot *last_used; + struct list_head all_slots; + int slots_allocated; + struct tasklet_struct irq_tasklet; +}; + +/** + * struct iop_adma_desc_slot - IOP-ADMA software descriptor + * @slot_node: node on the iop_adma_chan.all_slots list + * @chain_node: node on the op_adma_chan.chain list + * @hw_desc: virtual address of the hardware descriptor chain + * @phys: hardware address of the hardware descriptor chain + * @group_head: first operation in a transaction + * @slot_cnt: total slots used in an transaction (group of operations) + * @slots_per_op: number of slots per operation + * @idx: pool index + * @unmap_src_cnt: number of xor sources + * @unmap_len: transaction bytecount + * @tx_list: list of descriptors that are associated with one operation + * @async_tx: support for the async_tx api + * @group_list: list of slots that make up a multi-descriptor transaction + * for example transfer lengths larger than the supported hw max + * @xor_check_result: result of zero sum + * @crc32_result: result crc calculation + */ +struct iop_adma_desc_slot { + struct list_head slot_node; + struct list_head chain_node; + void *hw_desc; + struct iop_adma_desc_slot *group_head; + u16 slot_cnt; + u16 slots_per_op; + u16 idx; + u16 unmap_src_cnt; + size_t unmap_len; + struct list_head tx_list; + struct dma_async_tx_descriptor async_tx; + union { + u32 *xor_check_result; + u32 *crc32_result; + u32 *pq_check_result; + }; +}; + +struct iop_adma_platform_data { + int hw_id; + dma_cap_mask_t cap_mask; + size_t pool_size; +}; + +#define to_iop_sw_desc(addr_hw_desc) \ + container_of(addr_hw_desc, struct iop_adma_desc_slot, hw_desc) +#define iop_hw_desc_slot_idx(hw_desc, idx) \ + ( (void *) (((unsigned long) hw_desc) + ((idx) << 5)) ) +#endif diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h new file mode 100644 index 00000000..b2f95c72 --- /dev/null +++ b/arch/arm/include/asm/hardware/it8152.h @@ -0,0 +1,112 @@ +/* + * linux/include/arm/hardware/it8152.h + * + * Copyright Compulab Ltd., 2006,2007 + * Mike Rapoport <mike@compulab.co.il> + * + * ITE 8152 companion chip register definitions + */ + +#ifndef __ASM_HARDWARE_IT8152_H +#define __ASM_HARDWARE_IT8152_H +extern unsigned long it8152_base_address; + +#define IT8152_IO_BASE (it8152_base_address + 0x03e00000) +#define IT8152_CFGREG_BASE (it8152_base_address + 0x03f00000) + +#define __REG_IT8152(x) (it8152_base_address + (x)) + +#define IT8152_PCI_CFG_ADDR __REG_IT8152(0x3f00800) +#define IT8152_PCI_CFG_DATA __REG_IT8152(0x3f00804) + +#define IT8152_INTC_LDCNIRR __REG_IT8152(0x3f00300) +#define IT8152_INTC_LDPNIRR __REG_IT8152(0x3f00304) +#define IT8152_INTC_LDCNIMR __REG_IT8152(0x3f00308) +#define IT8152_INTC_LDPNIMR __REG_IT8152(0x3f0030C) +#define IT8152_INTC_LDNITR __REG_IT8152(0x3f00310) +#define IT8152_INTC_LDNIAR __REG_IT8152(0x3f00314) +#define IT8152_INTC_LPCNIRR __REG_IT8152(0x3f00320) +#define IT8152_INTC_LPPNIRR __REG_IT8152(0x3f00324) +#define IT8152_INTC_LPCNIMR __REG_IT8152(0x3f00328) +#define IT8152_INTC_LPPNIMR __REG_IT8152(0x3f0032C) +#define IT8152_INTC_LPNITR __REG_IT8152(0x3f00330) +#define IT8152_INTC_LPNIAR __REG_IT8152(0x3f00334) +#define IT8152_INTC_PDCNIRR __REG_IT8152(0x3f00340) +#define IT8152_INTC_PDPNIRR __REG_IT8152(0x3f00344) +#define IT8152_INTC_PDCNIMR __REG_IT8152(0x3f00348) +#define IT8152_INTC_PDPNIMR __REG_IT8152(0x3f0034C) +#define IT8152_INTC_PDNITR __REG_IT8152(0x3f00350) +#define IT8152_INTC_PDNIAR __REG_IT8152(0x3f00354) +#define IT8152_INTC_INTC_TYPER __REG_IT8152(0x3f003FC) + +#define IT8152_GPIO_GPDR __REG_IT8152(0x3f00500) + +/* + Interrupt controller per register summary: + --------------------------------------- + LCDNIRR: + IT8152_LD_IRQ(8) PCICLK stop + IT8152_LD_IRQ(7) MCLK ready + IT8152_LD_IRQ(6) s/w + IT8152_LD_IRQ(5) UART + IT8152_LD_IRQ(4) GPIO + IT8152_LD_IRQ(3) TIMER 4 + IT8152_LD_IRQ(2) TIMER 3 + IT8152_LD_IRQ(1) TIMER 2 + IT8152_LD_IRQ(0) TIMER 1 + + LPCNIRR: + IT8152_LP_IRQ(x) serial IRQ x + + PCIDNIRR: + IT8152_PD_IRQ(14) PCISERR + IT8152_PD_IRQ(13) CPU/PCI bridge target abort (h2pTADR) + IT8152_PD_IRQ(12) CPU/PCI bridge master abort (h2pMADR) + IT8152_PD_IRQ(11) PCI INTD + IT8152_PD_IRQ(10) PCI INTC + IT8152_PD_IRQ(9) PCI INTB + IT8152_PD_IRQ(8) PCI INTA + IT8152_PD_IRQ(7) serial INTD + IT8152_PD_IRQ(6) serial INTC + IT8152_PD_IRQ(5) serial INTB + IT8152_PD_IRQ(4) serial INTA + IT8152_PD_IRQ(3) serial IRQ IOCHK (IOCHKR) + IT8152_PD_IRQ(2) chaining DMA (CDMAR) + IT8152_PD_IRQ(1) USB (USBR) + IT8152_PD_IRQ(0) Audio controller (ACR) + */ +#define IT8152_IRQ(x) (IRQ_BOARD_START + (x)) +#define IT8152_LAST_IRQ (IRQ_BOARD_START + 40) + +/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */ +#define IT8152_LD_IRQ_COUNT 9 +#define IT8152_LP_IRQ_COUNT 16 +#define IT8152_PD_IRQ_COUNT 15 + +/* Priorities: */ +#define IT8152_PD_IRQ(i) IT8152_IRQ(i) +#define IT8152_LP_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT) +#define IT8152_LD_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT) + +/* frequently used interrupts */ +#define IT8152_PCISERR IT8152_PD_IRQ(14) +#define IT8152_H2PTADR IT8152_PD_IRQ(13) +#define IT8152_H2PMAR IT8152_PD_IRQ(12) +#define IT8152_PCI_INTD IT8152_PD_IRQ(11) +#define IT8152_PCI_INTC IT8152_PD_IRQ(10) +#define IT8152_PCI_INTB IT8152_PD_IRQ(9) +#define IT8152_PCI_INTA IT8152_PD_IRQ(8) +#define IT8152_CDMA_INT IT8152_PD_IRQ(2) +#define IT8152_USB_INT IT8152_PD_IRQ(1) +#define IT8152_AUDIO_INT IT8152_PD_IRQ(0) + +struct pci_dev; +struct pci_sys_data; + +extern void it8152_irq_demux(unsigned int irq, struct irq_desc *desc); +extern void it8152_init_irq(void); +extern int it8152_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin); +extern int it8152_pci_setup(int nr, struct pci_sys_data *sys); +extern struct pci_bus *it8152_pci_scan_bus(int nr, struct pci_sys_data *sys); + +#endif /* __ASM_HARDWARE_IT8152_H */ diff --git a/arch/arm/include/asm/hardware/linkup-l1110.h b/arch/arm/include/asm/hardware/linkup-l1110.h new file mode 100644 index 00000000..7ec91168 --- /dev/null +++ b/arch/arm/include/asm/hardware/linkup-l1110.h @@ -0,0 +1,48 @@ +/* +* +* Definitions for H3600 Handheld Computer +* +* Copyright 2001 Compaq Computer Corporation. +* +* Use consistent with the GNU GPL is permitted, +* provided that this copyright notice is +* preserved in its entirety in all copies and derived works. +* +* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, +* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS +* FITNESS FOR ANY PARTICULAR PURPOSE. +* +* Author: Jamey Hicks. +* +*/ + +/* LinkUp Systems PCCard/CompactFlash Interface for SA-1100 */ + +/* PC Card Status Register */ +#define LINKUP_PRS_S1 (1 << 0) /* voltage control bits S1-S4 */ +#define LINKUP_PRS_S2 (1 << 1) +#define LINKUP_PRS_S3 (1 << 2) +#define LINKUP_PRS_S4 (1 << 3) +#define LINKUP_PRS_BVD1 (1 << 4) +#define LINKUP_PRS_BVD2 (1 << 5) +#define LINKUP_PRS_VS1 (1 << 6) +#define LINKUP_PRS_VS2 (1 << 7) +#define LINKUP_PRS_RDY (1 << 8) +#define LINKUP_PRS_CD1 (1 << 9) +#define LINKUP_PRS_CD2 (1 << 10) + +/* PC Card Command Register */ +#define LINKUP_PRC_S1 (1 << 0) +#define LINKUP_PRC_S2 (1 << 1) +#define LINKUP_PRC_S3 (1 << 2) +#define LINKUP_PRC_S4 (1 << 3) +#define LINKUP_PRC_RESET (1 << 4) +#define LINKUP_PRC_APOE (1 << 5) /* Auto Power Off Enable: clears S1-S4 when either nCD goes high */ +#define LINKUP_PRC_CFE (1 << 6) /* CompactFlash mode Enable: addresses A[10:0] only, A[25:11] high */ +#define LINKUP_PRC_SOE (1 << 7) /* signal output driver enable */ +#define LINKUP_PRC_SSP (1 << 8) /* sock select polarity: 0 for socket 0, 1 for socket 1 */ +#define LINKUP_PRC_MBZ (1 << 15) /* must be zero */ + +struct linkup_l1110 { + volatile short prc; +}; diff --git a/arch/arm/include/asm/hardware/locomo.h b/arch/arm/include/asm/hardware/locomo.h new file mode 100644 index 00000000..74e51d6b --- /dev/null +++ b/arch/arm/include/asm/hardware/locomo.h @@ -0,0 +1,221 @@ +/* + * arch/arm/include/asm/hardware/locomo.h + * + * This file contains the definitions for the LoCoMo G/A Chip + * + * (C) Copyright 2004 John Lenz + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Based on sa1111.h + */ +#ifndef _ASM_ARCH_LOCOMO +#define _ASM_ARCH_LOCOMO + +#define locomo_writel(val,addr) ({ *(volatile u16 *)(addr) = (val); }) +#define locomo_readl(addr) (*(volatile u16 *)(addr)) + +/* LOCOMO version */ +#define LOCOMO_VER 0x00 + +/* Pin status */ +#define LOCOMO_ST 0x04 + +/* Pin status */ +#define LOCOMO_C32K 0x08 + +/* Interrupt controller */ +#define LOCOMO_ICR 0x0C + +/* MCS decoder for boot selecting */ +#define LOCOMO_MCSX0 0x10 +#define LOCOMO_MCSX1 0x14 +#define LOCOMO_MCSX2 0x18 +#define LOCOMO_MCSX3 0x1c + +/* Touch panel controller */ +#define LOCOMO_ASD 0x20 /* AD start delay */ +#define LOCOMO_HSD 0x28 /* HSYS delay */ +#define LOCOMO_HSC 0x2c /* HSYS period */ +#define LOCOMO_TADC 0x30 /* tablet ADC clock */ + + +/* Long time timer */ +#define LOCOMO_LTC 0xd8 /* LTC interrupt setting */ +#define LOCOMO_LTINT 0xdc /* LTC interrupt */ + +/* DAC control signal for LCD (COMADJ ) */ +#define LOCOMO_DAC 0xe0 +/* DAC control */ +#define LOCOMO_DAC_SCLOEB 0x08 /* SCL pin output data */ +#define LOCOMO_DAC_TEST 0x04 /* Test bit */ +#define LOCOMO_DAC_SDA 0x02 /* SDA pin level (read-only) */ +#define LOCOMO_DAC_SDAOEB 0x01 /* SDA pin output data */ + +/* SPI interface */ +#define LOCOMO_SPI 0x60 +#define LOCOMO_SPIMD 0x00 /* SPI mode setting */ +#define LOCOMO_SPICT 0x04 /* SPI mode control */ +#define LOCOMO_SPIST 0x08 /* SPI status */ +#define LOCOMO_SPI_TEND (1 << 3) /* Transfer end bit */ +#define LOCOMO_SPI_REND (1 << 2) /* Receive end bit */ +#define LOCOMO_SPI_RFW (1 << 1) /* write buffer bit */ +#define LOCOMO_SPI_RFR (1) /* read buffer bit */ + +#define LOCOMO_SPIIS 0x10 /* SPI interrupt status */ +#define LOCOMO_SPIWE 0x14 /* SPI interrupt status write enable */ +#define LOCOMO_SPIIE 0x18 /* SPI interrupt enable */ +#define LOCOMO_SPIIR 0x1c /* SPI interrupt request */ +#define LOCOMO_SPITD 0x20 /* SPI transfer data write */ +#define LOCOMO_SPIRD 0x24 /* SPI receive data read */ +#define LOCOMO_SPITS 0x28 /* SPI transfer data shift */ +#define LOCOMO_SPIRS 0x2C /* SPI receive data shift */ + +/* GPIO */ +#define LOCOMO_GPD 0x90 /* GPIO direction */ +#define LOCOMO_GPE 0x94 /* GPIO input enable */ +#define LOCOMO_GPL 0x98 /* GPIO level */ +#define LOCOMO_GPO 0x9c /* GPIO out data setting */ +#define LOCOMO_GRIE 0xa0 /* GPIO rise detection */ +#define LOCOMO_GFIE 0xa4 /* GPIO fall detection */ +#define LOCOMO_GIS 0xa8 /* GPIO edge detection status */ +#define LOCOMO_GWE 0xac /* GPIO status write enable */ +#define LOCOMO_GIE 0xb0 /* GPIO interrupt enable */ +#define LOCOMO_GIR 0xb4 /* GPIO interrupt request */ +#define LOCOMO_GPIO(Nb) (0x01 << (Nb)) +#define LOCOMO_GPIO_RTS LOCOMO_GPIO(0) +#define LOCOMO_GPIO_CTS LOCOMO_GPIO(1) +#define LOCOMO_GPIO_DSR LOCOMO_GPIO(2) +#define LOCOMO_GPIO_DTR LOCOMO_GPIO(3) +#define LOCOMO_GPIO_LCD_VSHA_ON LOCOMO_GPIO(4) +#define LOCOMO_GPIO_LCD_VSHD_ON LOCOMO_GPIO(5) +#define LOCOMO_GPIO_LCD_VEE_ON LOCOMO_GPIO(6) +#define LOCOMO_GPIO_LCD_MOD LOCOMO_GPIO(7) +#define LOCOMO_GPIO_DAC_ON LOCOMO_GPIO(8) +#define LOCOMO_GPIO_FL_VR LOCOMO_GPIO(9) +#define LOCOMO_GPIO_DAC_SDATA LOCOMO_GPIO(10) +#define LOCOMO_GPIO_DAC_SCK LOCOMO_GPIO(11) +#define LOCOMO_GPIO_DAC_SLOAD LOCOMO_GPIO(12) +#define LOCOMO_GPIO_CARD_DETECT LOCOMO_GPIO(13) +#define LOCOMO_GPIO_WRITE_PROT LOCOMO_GPIO(14) +#define LOCOMO_GPIO_CARD_POWER LOCOMO_GPIO(15) + +/* Start the definitions of the devices. Each device has an initial + * base address and a series of offsets from that base address. */ + +/* Keyboard controller */ +#define LOCOMO_KEYBOARD 0x40 +#define LOCOMO_KIB 0x00 /* KIB level */ +#define LOCOMO_KSC 0x04 /* KSTRB control */ +#define LOCOMO_KCMD 0x08 /* KSTRB command */ +#define LOCOMO_KIC 0x0c /* Key interrupt */ + +/* Front light adjustment controller */ +#define LOCOMO_FRONTLIGHT 0xc8 +#define LOCOMO_ALS 0x00 /* Adjust light cycle */ +#define LOCOMO_ALD 0x04 /* Adjust light duty */ + +#define LOCOMO_ALC_EN 0x8000 + +/* Backlight controller: TFT signal */ +#define LOCOMO_BACKLIGHT 0x38 +#define LOCOMO_TC 0x00 /* TFT control signal */ +#define LOCOMO_CPSD 0x04 /* CPS delay */ + +/* Audio controller */ +#define LOCOMO_AUDIO 0x54 +#define LOCOMO_ACC 0x00 /* Audio clock */ +#define LOCOMO_PAIF 0xD0 /* PCM audio interface */ +/* Audio clock */ +#define LOCOMO_ACC_XON 0x80 +#define LOCOMO_ACC_XEN 0x40 +#define LOCOMO_ACC_XSEL0 0x00 +#define LOCOMO_ACC_XSEL1 0x20 +#define LOCOMO_ACC_MCLKEN 0x10 +#define LOCOMO_ACC_64FSEN 0x08 +#define LOCOMO_ACC_CLKSEL000 0x00 /* mclk 2 */ +#define LOCOMO_ACC_CLKSEL001 0x01 /* mclk 3 */ +#define LOCOMO_ACC_CLKSEL010 0x02 /* mclk 4 */ +#define LOCOMO_ACC_CLKSEL011 0x03 /* mclk 6 */ +#define LOCOMO_ACC_CLKSEL100 0x04 /* mclk 8 */ +#define LOCOMO_ACC_CLKSEL101 0x05 /* mclk 12 */ +/* PCM audio interface */ +#define LOCOMO_PAIF_SCINV 0x20 +#define LOCOMO_PAIF_SCEN 0x10 +#define LOCOMO_PAIF_LRCRST 0x08 +#define LOCOMO_PAIF_LRCEVE 0x04 +#define LOCOMO_PAIF_LRCINV 0x02 +#define LOCOMO_PAIF_LRCEN 0x01 + +/* LED controller */ +#define LOCOMO_LED 0xe8 +#define LOCOMO_LPT0 0x00 +#define LOCOMO_LPT1 0x04 +/* LED control */ +#define LOCOMO_LPT_TOFH 0x80 +#define LOCOMO_LPT_TOFL 0x08 +#define LOCOMO_LPT_TOH(TOH) ((TOH & 0x7) << 4) +#define LOCOMO_LPT_TOL(TOL) ((TOL & 0x7)) + +extern struct bus_type locomo_bus_type; + +#define LOCOMO_DEVID_KEYBOARD 0 +#define LOCOMO_DEVID_FRONTLIGHT 1 +#define LOCOMO_DEVID_BACKLIGHT 2 +#define LOCOMO_DEVID_AUDIO 3 +#define LOCOMO_DEVID_LED 4 +#define LOCOMO_DEVID_UART 5 +#define LOCOMO_DEVID_SPI 6 + +struct locomo_dev { + struct device dev; + unsigned int devid; + unsigned int irq[1]; + + void *mapbase; + unsigned long length; + + u64 dma_mask; +}; + +#define LOCOMO_DEV(_d) container_of((_d), struct locomo_dev, dev) + +#define locomo_get_drvdata(d) dev_get_drvdata(&(d)->dev) +#define locomo_set_drvdata(d,p) dev_set_drvdata(&(d)->dev, p) + +struct locomo_driver { + struct device_driver drv; + unsigned int devid; + int (*probe)(struct locomo_dev *); + int (*remove)(struct locomo_dev *); + int (*suspend)(struct locomo_dev *, pm_message_t); + int (*resume)(struct locomo_dev *); +}; + +#define LOCOMO_DRV(_d) container_of((_d), struct locomo_driver, drv) + +#define LOCOMO_DRIVER_NAME(_ldev) ((_ldev)->dev.driver->name) + +void locomo_lcd_power(struct locomo_dev *, int, unsigned int); + +int locomo_driver_register(struct locomo_driver *); +void locomo_driver_unregister(struct locomo_driver *); + +/* GPIO control functions */ +void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir); +int locomo_gpio_read_level(struct device *dev, unsigned int bits); +int locomo_gpio_read_output(struct device *dev, unsigned int bits); +void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set); + +/* M62332 control function */ +void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel); + +/* Frontlight control */ +void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf); + +struct locomo_platform_data { + int irq_base; /* IRQ base for cascaded on-chip IRQs */ +}; + +#endif diff --git a/arch/arm/include/asm/hardware/memc.h b/arch/arm/include/asm/hardware/memc.h new file mode 100644 index 00000000..42ba7c16 --- /dev/null +++ b/arch/arm/include/asm/hardware/memc.h @@ -0,0 +1,26 @@ +/* + * arch/arm/include/asm/hardware/memc.h + * + * Copyright (C) Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#define VDMA_ALIGNMENT PAGE_SIZE +#define VDMA_XFERSIZE 16 +#define VDMA_INIT 0 +#define VDMA_START 1 +#define VDMA_END 2 + +#ifndef __ASSEMBLY__ +extern void memc_write(unsigned int reg, unsigned long val); + +#define video_set_dma(start,end,offset) \ +do { \ + memc_write (VDMA_START, (start >> 2)); \ + memc_write (VDMA_END, (end - VDMA_XFERSIZE) >> 2); \ + memc_write (VDMA_INIT, (offset >> 2)); \ +} while (0) + +#endif diff --git a/arch/arm/include/asm/hardware/pci_v3.h b/arch/arm/include/asm/hardware/pci_v3.h new file mode 100644 index 00000000..2811c7e2 --- /dev/null +++ b/arch/arm/include/asm/hardware/pci_v3.h @@ -0,0 +1,186 @@ +/* + * arch/arm/include/asm/hardware/pci_v3.h + * + * Internal header file PCI V3 chip + * + * Copyright (C) ARM Limited + * Copyright (C) 2000-2001 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef ASM_ARM_HARDWARE_PCI_V3_H +#define ASM_ARM_HARDWARE_PCI_V3_H + +/* ------------------------------------------------------------------------------- + * V3 Local Bus to PCI Bridge definitions + * ------------------------------------------------------------------------------- + * Registers (these are taken from page 129 of the EPC User's Manual Rev 1.04 + * All V3 register names are prefaced by V3_ to avoid clashing with any other + * PCI definitions. Their names match the user's manual. + * + * I'm assuming that I20 is disabled. + * + */ +#define V3_PCI_VENDOR 0x00000000 +#define V3_PCI_DEVICE 0x00000002 +#define V3_PCI_CMD 0x00000004 +#define V3_PCI_STAT 0x00000006 +#define V3_PCI_CC_REV 0x00000008 +#define V3_PCI_HDR_CFG 0x0000000C +#define V3_PCI_IO_BASE 0x00000010 +#define V3_PCI_BASE0 0x00000014 +#define V3_PCI_BASE1 0x00000018 +#define V3_PCI_SUB_VENDOR 0x0000002C +#define V3_PCI_SUB_ID 0x0000002E +#define V3_PCI_ROM 0x00000030 +#define V3_PCI_BPARAM 0x0000003C +#define V3_PCI_MAP0 0x00000040 +#define V3_PCI_MAP1 0x00000044 +#define V3_PCI_INT_STAT 0x00000048 +#define V3_PCI_INT_CFG 0x0000004C +#define V3_LB_BASE0 0x00000054 +#define V3_LB_BASE1 0x00000058 +#define V3_LB_MAP0 0x0000005E +#define V3_LB_MAP1 0x00000062 +#define V3_LB_BASE2 0x00000064 +#define V3_LB_MAP2 0x00000066 +#define V3_LB_SIZE 0x00000068 +#define V3_LB_IO_BASE 0x0000006E +#define V3_FIFO_CFG 0x00000070 +#define V3_FIFO_PRIORITY 0x00000072 +#define V3_FIFO_STAT 0x00000074 +#define V3_LB_ISTAT 0x00000076 +#define V3_LB_IMASK 0x00000077 +#define V3_SYSTEM 0x00000078 +#define V3_LB_CFG 0x0000007A +#define V3_PCI_CFG 0x0000007C +#define V3_DMA_PCI_ADR0 0x00000080 +#define V3_DMA_PCI_ADR1 0x00000090 +#define V3_DMA_LOCAL_ADR0 0x00000084 +#define V3_DMA_LOCAL_ADR1 0x00000094 +#define V3_DMA_LENGTH0 0x00000088 +#define V3_DMA_LENGTH1 0x00000098 +#define V3_DMA_CSR0 0x0000008B +#define V3_DMA_CSR1 0x0000009B +#define V3_DMA_CTLB_ADR0 0x0000008C +#define V3_DMA_CTLB_ADR1 0x0000009C +#define V3_DMA_DELAY 0x000000E0 +#define V3_MAIL_DATA 0x000000C0 +#define V3_PCI_MAIL_IEWR 0x000000D0 +#define V3_PCI_MAIL_IERD 0x000000D2 +#define V3_LB_MAIL_IEWR 0x000000D4 +#define V3_LB_MAIL_IERD 0x000000D6 +#define V3_MAIL_WR_STAT 0x000000D8 +#define V3_MAIL_RD_STAT 0x000000DA +#define V3_QBA_MAP 0x000000DC + +/* PCI COMMAND REGISTER bits + */ +#define V3_COMMAND_M_FBB_EN (1 << 9) +#define V3_COMMAND_M_SERR_EN (1 << 8) +#define V3_COMMAND_M_PAR_EN (1 << 6) +#define V3_COMMAND_M_MASTER_EN (1 << 2) +#define V3_COMMAND_M_MEM_EN (1 << 1) +#define V3_COMMAND_M_IO_EN (1 << 0) + +/* SYSTEM REGISTER bits + */ +#define V3_SYSTEM_M_RST_OUT (1 << 15) +#define V3_SYSTEM_M_LOCK (1 << 14) + +/* PCI_CFG bits + */ +#define V3_PCI_CFG_M_I2O_EN (1 << 15) +#define V3_PCI_CFG_M_IO_REG_DIS (1 << 14) +#define V3_PCI_CFG_M_IO_DIS (1 << 13) +#define V3_PCI_CFG_M_EN3V (1 << 12) +#define V3_PCI_CFG_M_RETRY_EN (1 << 10) +#define V3_PCI_CFG_M_AD_LOW1 (1 << 9) +#define V3_PCI_CFG_M_AD_LOW0 (1 << 8) + +/* PCI_BASE register bits (PCI -> Local Bus) + */ +#define V3_PCI_BASE_M_ADR_BASE 0xFFF00000 +#define V3_PCI_BASE_M_ADR_BASEL 0x000FFF00 +#define V3_PCI_BASE_M_PREFETCH (1 << 3) +#define V3_PCI_BASE_M_TYPE (3 << 1) +#define V3_PCI_BASE_M_IO (1 << 0) + +/* PCI MAP register bits (PCI -> Local bus) + */ +#define V3_PCI_MAP_M_MAP_ADR 0xFFF00000 +#define V3_PCI_MAP_M_RD_POST_INH (1 << 15) +#define V3_PCI_MAP_M_ROM_SIZE (3 << 10) +#define V3_PCI_MAP_M_SWAP (3 << 8) +#define V3_PCI_MAP_M_ADR_SIZE 0x000000F0 +#define V3_PCI_MAP_M_REG_EN (1 << 1) +#define V3_PCI_MAP_M_ENABLE (1 << 0) + +/* + * LB_BASE0,1 register bits (Local bus -> PCI) + */ +#define V3_LB_BASE_ADR_BASE 0xfff00000 +#define V3_LB_BASE_SWAP (3 << 8) +#define V3_LB_BASE_ADR_SIZE (15 << 4) +#define V3_LB_BASE_PREFETCH (1 << 3) +#define V3_LB_BASE_ENABLE (1 << 0) + +#define V3_LB_BASE_ADR_SIZE_1MB (0 << 4) +#define V3_LB_BASE_ADR_SIZE_2MB (1 << 4) +#define V3_LB_BASE_ADR_SIZE_4MB (2 << 4) +#define V3_LB_BASE_ADR_SIZE_8MB (3 << 4) +#define V3_LB_BASE_ADR_SIZE_16MB (4 << 4) +#define V3_LB_BASE_ADR_SIZE_32MB (5 << 4) +#define V3_LB_BASE_ADR_SIZE_64MB (6 << 4) +#define V3_LB_BASE_ADR_SIZE_128MB (7 << 4) +#define V3_LB_BASE_ADR_SIZE_256MB (8 << 4) +#define V3_LB_BASE_ADR_SIZE_512MB (9 << 4) +#define V3_LB_BASE_ADR_SIZE_1GB (10 << 4) +#define V3_LB_BASE_ADR_SIZE_2GB (11 << 4) + +#define v3_addr_to_lb_base(a) ((a) & V3_LB_BASE_ADR_BASE) + +/* + * LB_MAP0,1 register bits (Local bus -> PCI) + */ +#define V3_LB_MAP_MAP_ADR 0xfff0 +#define V3_LB_MAP_TYPE (7 << 1) +#define V3_LB_MAP_AD_LOW_EN (1 << 0) + +#define V3_LB_MAP_TYPE_IACK (0 << 1) +#define V3_LB_MAP_TYPE_IO (1 << 1) +#define V3_LB_MAP_TYPE_MEM (3 << 1) +#define V3_LB_MAP_TYPE_CONFIG (5 << 1) +#define V3_LB_MAP_TYPE_MEM_MULTIPLE (6 << 1) + +#define v3_addr_to_lb_map(a) (((a) >> 16) & V3_LB_MAP_MAP_ADR) + +/* + * LB_BASE2 register bits (Local bus -> PCI IO) + */ +#define V3_LB_BASE2_ADR_BASE 0xff00 +#define V3_LB_BASE2_SWAP (3 << 6) +#define V3_LB_BASE2_ENABLE (1 << 0) + +#define v3_addr_to_lb_base2(a) (((a) >> 16) & V3_LB_BASE2_ADR_BASE) + +/* + * LB_MAP2 register bits (Local bus -> PCI IO) + */ +#define V3_LB_MAP2_MAP_ADR 0xff00 + +#define v3_addr_to_lb_map2(a) (((a) >> 16) & V3_LB_MAP2_MAP_ADR) + +#endif diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h new file mode 100644 index 00000000..e4a04e4e --- /dev/null +++ b/arch/arm/include/asm/hardware/pl080.h @@ -0,0 +1,140 @@ +/* arch/arm/include/asm/hardware/pl080.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * ARM PrimeCell PL080 DMA controller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Note, there are some Samsung updates to this controller block which + * make it not entierly compatible with the PL080 specification from + * ARM. When in doubt, check the Samsung documentation first. + * + * The Samsung defines are PL080S, and add an extra control register, + * the ability to move more than 2^11 counts of data and some extra + * OneNAND features. +*/ + +#define PL080_INT_STATUS (0x00) +#define PL080_TC_STATUS (0x04) +#define PL080_TC_CLEAR (0x08) +#define PL080_ERR_STATUS (0x0C) +#define PL080_ERR_CLEAR (0x10) +#define PL080_RAW_TC_STATUS (0x14) +#define PL080_RAW_ERR_STATUS (0x18) +#define PL080_EN_CHAN (0x1c) +#define PL080_SOFT_BREQ (0x20) +#define PL080_SOFT_SREQ (0x24) +#define PL080_SOFT_LBREQ (0x28) +#define PL080_SOFT_LSREQ (0x2C) + +#define PL080_CONFIG (0x30) +#define PL080_CONFIG_M2_BE (1 << 2) +#define PL080_CONFIG_M1_BE (1 << 1) +#define PL080_CONFIG_ENABLE (1 << 0) + +#define PL080_SYNC (0x34) + +/* Per channel configuration registers */ + +#define PL080_Cx_STRIDE (0x20) +#define PL080_Cx_BASE(x) ((0x100 + (x * 0x20))) +#define PL080_Cx_SRC_ADDR(x) ((0x100 + (x * 0x20))) +#define PL080_Cx_DST_ADDR(x) ((0x104 + (x * 0x20))) +#define PL080_Cx_LLI(x) ((0x108 + (x * 0x20))) +#define PL080_Cx_CONTROL(x) ((0x10C + (x * 0x20))) +#define PL080_Cx_CONFIG(x) ((0x110 + (x * 0x20))) +#define PL080S_Cx_CONTROL2(x) ((0x110 + (x * 0x20))) +#define PL080S_Cx_CONFIG(x) ((0x114 + (x * 0x20))) + +#define PL080_CH_SRC_ADDR (0x00) +#define PL080_CH_DST_ADDR (0x04) +#define PL080_CH_LLI (0x08) +#define PL080_CH_CONTROL (0x0C) +#define PL080_CH_CONFIG (0x10) +#define PL080S_CH_CONTROL2 (0x10) +#define PL080S_CH_CONFIG (0x14) + +#define PL080_LLI_ADDR_MASK (0x3fffffff << 2) +#define PL080_LLI_ADDR_SHIFT (2) +#define PL080_LLI_LM_AHB2 (1 << 0) + +#define PL080_CONTROL_TC_IRQ_EN (1 << 31) +#define PL080_CONTROL_PROT_MASK (0x7 << 28) +#define PL080_CONTROL_PROT_SHIFT (28) +#define PL080_CONTROL_PROT_CACHE (1 << 30) +#define PL080_CONTROL_PROT_BUFF (1 << 29) +#define PL080_CONTROL_PROT_SYS (1 << 28) +#define PL080_CONTROL_DST_INCR (1 << 27) +#define PL080_CONTROL_SRC_INCR (1 << 26) +#define PL080_CONTROL_DST_AHB2 (1 << 25) +#define PL080_CONTROL_SRC_AHB2 (1 << 24) +#define PL080_CONTROL_DWIDTH_MASK (0x7 << 21) +#define PL080_CONTROL_DWIDTH_SHIFT (21) +#define PL080_CONTROL_SWIDTH_MASK (0x7 << 18) +#define PL080_CONTROL_SWIDTH_SHIFT (18) +#define PL080_CONTROL_DB_SIZE_MASK (0x7 << 15) +#define PL080_CONTROL_DB_SIZE_SHIFT (15) +#define PL080_CONTROL_SB_SIZE_MASK (0x7 << 12) +#define PL080_CONTROL_SB_SIZE_SHIFT (12) +#define PL080_CONTROL_TRANSFER_SIZE_MASK (0xfff << 0) +#define PL080_CONTROL_TRANSFER_SIZE_SHIFT (0) + +#define PL080_BSIZE_1 (0x0) +#define PL080_BSIZE_4 (0x1) +#define PL080_BSIZE_8 (0x2) +#define PL080_BSIZE_16 (0x3) +#define PL080_BSIZE_32 (0x4) +#define PL080_BSIZE_64 (0x5) +#define PL080_BSIZE_128 (0x6) +#define PL080_BSIZE_256 (0x7) + +#define PL080_WIDTH_8BIT (0x0) +#define PL080_WIDTH_16BIT (0x1) +#define PL080_WIDTH_32BIT (0x2) + +#define PL080_CONFIG_HALT (1 << 18) +#define PL080_CONFIG_ACTIVE (1 << 17) /* RO */ +#define PL080_CONFIG_LOCK (1 << 16) +#define PL080_CONFIG_TC_IRQ_MASK (1 << 15) +#define PL080_CONFIG_ERR_IRQ_MASK (1 << 14) +#define PL080_CONFIG_FLOW_CONTROL_MASK (0x7 << 11) +#define PL080_CONFIG_FLOW_CONTROL_SHIFT (11) +#define PL080_CONFIG_DST_SEL_MASK (0xf << 6) +#define PL080_CONFIG_DST_SEL_SHIFT (6) +#define PL080_CONFIG_SRC_SEL_MASK (0xf << 1) +#define PL080_CONFIG_SRC_SEL_SHIFT (1) +#define PL080_CONFIG_ENABLE (1 << 0) + +#define PL080_FLOW_MEM2MEM (0x0) +#define PL080_FLOW_MEM2PER (0x1) +#define PL080_FLOW_PER2MEM (0x2) +#define PL080_FLOW_SRC2DST (0x3) +#define PL080_FLOW_SRC2DST_DST (0x4) +#define PL080_FLOW_MEM2PER_PER (0x5) +#define PL080_FLOW_PER2MEM_PER (0x6) +#define PL080_FLOW_SRC2DST_SRC (0x7) + +/* DMA linked list chain structure */ + +struct pl080_lli { + u32 src_addr; + u32 dst_addr; + u32 next_lli; + u32 control0; +}; + +struct pl080s_lli { + u32 src_addr; + u32 dst_addr; + u32 next_lli; + u32 control0; + u32 control1; +}; + diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h new file mode 100644 index 00000000..575fa818 --- /dev/null +++ b/arch/arm/include/asm/hardware/pl330.h @@ -0,0 +1,217 @@ +/* linux/include/asm/hardware/pl330.h + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __PL330_CORE_H +#define __PL330_CORE_H + +#define PL330_MAX_CHAN 8 +#define PL330_MAX_IRQS 32 +#define PL330_MAX_PERI 32 + +enum pl330_srccachectrl { + SCCTRL0 = 0, /* Noncacheable and nonbufferable */ + SCCTRL1, /* Bufferable only */ + SCCTRL2, /* Cacheable, but do not allocate */ + SCCTRL3, /* Cacheable and bufferable, but do not allocate */ + SINVALID1, + SINVALID2, + SCCTRL6, /* Cacheable write-through, allocate on reads only */ + SCCTRL7, /* Cacheable write-back, allocate on reads only */ +}; + +enum pl330_dstcachectrl { + DCCTRL0 = 0, /* Noncacheable and nonbufferable */ + DCCTRL1, /* Bufferable only */ + DCCTRL2, /* Cacheable, but do not allocate */ + DCCTRL3, /* Cacheable and bufferable, but do not allocate */ + DINVALID1 = 8, + DINVALID2, + DCCTRL6, /* Cacheable write-through, allocate on writes only */ + DCCTRL7, /* Cacheable write-back, allocate on writes only */ +}; + +/* Populated by the PL330 core driver for DMA API driver's info */ +struct pl330_config { + u32 periph_id; + u32 pcell_id; +#define DMAC_MODE_NS (1 << 0) + unsigned int mode; + unsigned int data_bus_width:10; /* In number of bits */ + unsigned int data_buf_dep:10; + unsigned int num_chan:4; + unsigned int num_peri:6; + u32 peri_ns; + unsigned int num_events:6; + u32 irq_ns; +}; + +/* Handle to the DMAC provided to the PL330 core */ +struct pl330_info { + /* Owning device */ + struct device *dev; + /* Size of MicroCode buffers for each channel. */ + unsigned mcbufsz; + /* ioremap'ed address of PL330 registers. */ + void __iomem *base; + /* Client can freely use it. */ + void *client_data; + /* PL330 core data, Client must not touch it. */ + void *pl330_data; + /* Populated by the PL330 core driver during pl330_add */ + struct pl330_config pcfg; + /* + * If the DMAC has some reset mechanism, then the + * client may want to provide pointer to the method. + */ + void (*dmac_reset)(struct pl330_info *pi); +}; + +enum pl330_byteswap { + SWAP_NO = 0, + SWAP_2, + SWAP_4, + SWAP_8, + SWAP_16, +}; + +/** + * Request Configuration. + * The PL330 core does not modify this and uses the last + * working configuration if the request doesn't provide any. + * + * The Client may want to provide this info only for the + * first request and a request with new settings. + */ +struct pl330_reqcfg { + /* Address Incrementing */ + unsigned dst_inc:1; + unsigned src_inc:1; + + /* + * For now, the SRC & DST protection levels + * and burst size/length are assumed same. + */ + bool nonsecure; + bool privileged; + bool insnaccess; + unsigned brst_len:5; + unsigned brst_size:3; /* in power of 2 */ + + enum pl330_dstcachectrl dcctl; + enum pl330_srccachectrl scctl; + enum pl330_byteswap swap; +}; + +/* + * One cycle of DMAC operation. + * There may be more than one xfer in a request. + */ +struct pl330_xfer { + u32 src_addr; + u32 dst_addr; + /* Size to xfer */ + u32 bytes; + /* + * Pointer to next xfer in the list. + * The last xfer in the req must point to NULL. + */ + struct pl330_xfer *next; +}; + +/* The xfer callbacks are made with one of these arguments. */ +enum pl330_op_err { + /* The all xfers in the request were success. */ + PL330_ERR_NONE, + /* If req aborted due to global error. */ + PL330_ERR_ABORT, + /* If req failed due to problem with Channel. */ + PL330_ERR_FAIL, +}; + +enum pl330_reqtype { + MEMTOMEM, + MEMTODEV, + DEVTOMEM, + DEVTODEV, +}; + +/* A request defining Scatter-Gather List ending with NULL xfer. */ +struct pl330_req { + enum pl330_reqtype rqtype; + /* Index of peripheral for the xfer. */ + unsigned peri:5; + /* Unique token for this xfer, set by the client. */ + void *token; + /* Callback to be called after xfer. */ + void (*xfer_cb)(void *token, enum pl330_op_err err); + /* If NULL, req will be done at last set parameters. */ + struct pl330_reqcfg *cfg; + /* Pointer to first xfer in the request. */ + struct pl330_xfer *x; +}; + +/* + * To know the status of the channel and DMAC, the client + * provides a pointer to this structure. The PL330 core + * fills it with current information. + */ +struct pl330_chanstatus { + /* + * If the DMAC engine halted due to some error, + * the client should remove-add DMAC. + */ + bool dmac_halted; + /* + * If channel is halted due to some error, + * the client should ABORT/FLUSH and START the channel. + */ + bool faulting; + /* Location of last load */ + u32 src_addr; + /* Location of last store */ + u32 dst_addr; + /* + * Pointer to the currently active req, NULL if channel is + * inactive, even though the requests may be present. + */ + struct pl330_req *top_req; + /* Pointer to req waiting second in the queue if any. */ + struct pl330_req *wait_req; +}; + +enum pl330_chan_op { + /* Start the channel */ + PL330_OP_START, + /* Abort the active xfer */ + PL330_OP_ABORT, + /* Stop xfer and flush queue */ + PL330_OP_FLUSH, +}; + +extern int pl330_add(struct pl330_info *); +extern void pl330_del(struct pl330_info *pi); +extern int pl330_update(const struct pl330_info *pi); +extern void pl330_release_channel(void *ch_id); +extern void *pl330_request_channel(const struct pl330_info *pi); +extern int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus); +extern int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op); +extern int pl330_submit_req(void *ch_id, struct pl330_req *r); + +#endif /* __PL330_CORE_H */ diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h new file mode 100644 index 00000000..92ed254c --- /dev/null +++ b/arch/arm/include/asm/hardware/sa1111.h @@ -0,0 +1,585 @@ +/* + * arch/arm/include/asm/hardware/sa1111.h + * + * Copyright (C) 2000 John G Dorsey <john+@cs.cmu.edu> + * + * This file contains definitions for the SA-1111 Companion Chip. + * (Structure and naming borrowed from SA-1101.h, by Peter Danielsson.) + * + * Macro that calculates real address for registers in the SA-1111 + */ + +#ifndef _ASM_ARCH_SA1111 +#define _ASM_ARCH_SA1111 + +#include <mach/bitfield.h> + +/* + * The SA1111 is always located at virtual 0xf4000000, and is always + * "native" endian. + */ + +#define SA1111_VBASE 0xf4000000 + +/* Don't use these! */ +#define SA1111_p2v( x ) ((x) - SA1111_BASE + SA1111_VBASE) +#define SA1111_v2p( x ) ((x) - SA1111_VBASE + SA1111_BASE) + +#ifndef __ASSEMBLY__ +#define _SA1111(x) ((x) + sa1111->resource.start) +#endif + +#define sa1111_writel(val,addr) __raw_writel(val, addr) +#define sa1111_readl(addr) __raw_readl(addr) + +/* + * 26 bits of the SA-1110 address bus are available to the SA-1111. + * Use these when feeding target addresses to the DMA engines. + */ + +#define SA1111_ADDR_WIDTH (26) +#define SA1111_ADDR_MASK ((1<<SA1111_ADDR_WIDTH)-1) +#define SA1111_DMA_ADDR(x) ((x)&SA1111_ADDR_MASK) + +/* + * Don't ask the (SAC) DMA engines to move less than this amount. + */ + +#define SA1111_SAC_DMA_MIN_XFER (0x800) + +/* + * System Bus Interface (SBI) + * + * Registers + * SKCR Control Register + * SMCR Shared Memory Controller Register + * SKID ID Register + */ +#define SA1111_SKCR 0x0000 +#define SA1111_SMCR 0x0004 +#define SA1111_SKID 0x0008 + +#define SKCR_PLL_BYPASS (1<<0) +#define SKCR_RCLKEN (1<<1) +#define SKCR_SLEEP (1<<2) +#define SKCR_DOZE (1<<3) +#define SKCR_VCO_OFF (1<<4) +#define SKCR_SCANTSTEN (1<<5) +#define SKCR_CLKTSTEN (1<<6) +#define SKCR_RDYEN (1<<7) +#define SKCR_SELAC (1<<8) +#define SKCR_OPPC (1<<9) +#define SKCR_PLLTSTEN (1<<10) +#define SKCR_USBIOTSTEN (1<<11) +/* + * Don't believe the specs! Take them, throw them outside. Leave them + * there for a week. Spit on them. Walk on them. Stamp on them. + * Pour gasoline over them and finally burn them. Now think about coding. + * - The October 1999 errata (278260-007) says its bit 13, 1 to enable. + * - The Feb 2001 errata (278260-010) says that the previous errata + * (278260-009) is wrong, and its bit actually 12, fixed in spec + * 278242-003. + * - The SA1111 manual (278242) says bit 12, but 0 to enable. + * - Reality is bit 13, 1 to enable. + * -- rmk + */ +#define SKCR_OE_EN (1<<13) + +#define SMCR_DTIM (1<<0) +#define SMCR_MBGE (1<<1) +#define SMCR_DRAC_0 (1<<2) +#define SMCR_DRAC_1 (1<<3) +#define SMCR_DRAC_2 (1<<4) +#define SMCR_DRAC Fld(3, 2) +#define SMCR_CLAT (1<<5) + +#define SKID_SIREV_MASK (0x000000f0) +#define SKID_MTREV_MASK (0x0000000f) +#define SKID_ID_MASK (0xffffff00) +#define SKID_SA1111_ID (0x690cc200) + +/* + * System Controller + * + * Registers + * SKPCR Power Control Register + * SKCDR Clock Divider Register + * SKAUD Audio Clock Divider Register + * SKPMC PS/2 Mouse Clock Divider Register + * SKPTC PS/2 Track Pad Clock Divider Register + * SKPEN0 PWM0 Enable Register + * SKPWM0 PWM0 Clock Register + * SKPEN1 PWM1 Enable Register + * SKPWM1 PWM1 Clock Register + */ +#define SA1111_SKPCR 0x0200 +#define SA1111_SKCDR 0x0204 +#define SA1111_SKAUD 0x0208 +#define SA1111_SKPMC 0x020c +#define SA1111_SKPTC 0x0210 +#define SA1111_SKPEN0 0x0214 +#define SA1111_SKPWM0 0x0218 +#define SA1111_SKPEN1 0x021c +#define SA1111_SKPWM1 0x0220 + +#define SKPCR_UCLKEN (1<<0) +#define SKPCR_ACCLKEN (1<<1) +#define SKPCR_I2SCLKEN (1<<2) +#define SKPCR_L3CLKEN (1<<3) +#define SKPCR_SCLKEN (1<<4) +#define SKPCR_PMCLKEN (1<<5) +#define SKPCR_PTCLKEN (1<<6) +#define SKPCR_DCLKEN (1<<7) +#define SKPCR_PWMCLKEN (1<<8) + +/* + * USB Host controller + */ +#define SA1111_USB 0x0400 + +/* + * Offsets from SA1111_USB_BASE + */ +#define SA1111_USB_STATUS 0x0118 +#define SA1111_USB_RESET 0x011c +#define SA1111_USB_IRQTEST 0x0120 + +#define USB_RESET_FORCEIFRESET (1 << 0) +#define USB_RESET_FORCEHCRESET (1 << 1) +#define USB_RESET_CLKGENRESET (1 << 2) +#define USB_RESET_SIMSCALEDOWN (1 << 3) +#define USB_RESET_USBINTTEST (1 << 4) +#define USB_RESET_SLEEPSTBYEN (1 << 5) +#define USB_RESET_PWRSENSELOW (1 << 6) +#define USB_RESET_PWRCTRLLOW (1 << 7) + +#define USB_STATUS_IRQHCIRMTWKUP (1 << 7) +#define USB_STATUS_IRQHCIBUFFACC (1 << 8) +#define USB_STATUS_NIRQHCIM (1 << 9) +#define USB_STATUS_NHCIMFCLR (1 << 10) +#define USB_STATUS_USBPWRSENSE (1 << 11) + +/* + * Serial Audio Controller + * + * Registers + * SACR0 Serial Audio Common Control Register + * SACR1 Serial Audio Alternate Mode (I2C/MSB) Control Register + * SACR2 Serial Audio AC-link Control Register + * SASR0 Serial Audio I2S/MSB Interface & FIFO Status Register + * SASR1 Serial Audio AC-link Interface & FIFO Status Register + * SASCR Serial Audio Status Clear Register + * L3_CAR L3 Control Bus Address Register + * L3_CDR L3 Control Bus Data Register + * ACCAR AC-link Command Address Register + * ACCDR AC-link Command Data Register + * ACSAR AC-link Status Address Register + * ACSDR AC-link Status Data Register + * SADTCS Serial Audio DMA Transmit Control/Status Register + * SADTSA Serial Audio DMA Transmit Buffer Start Address A + * SADTCA Serial Audio DMA Transmit Buffer Count Register A + * SADTSB Serial Audio DMA Transmit Buffer Start Address B + * SADTCB Serial Audio DMA Transmit Buffer Count Register B + * SADRCS Serial Audio DMA Receive Control/Status Register + * SADRSA Serial Audio DMA Receive Buffer Start Address A + * SADRCA Serial Audio DMA Receive Buffer Count Register A + * SADRSB Serial Audio DMA Receive Buffer Start Address B + * SADRCB Serial Audio DMA Receive Buffer Count Register B + * SAITR Serial Audio Interrupt Test Register + * SADR Serial Audio Data Register (16 x 32-bit) + */ + +#define SA1111_SERAUDIO 0x0600 + +/* + * These are offsets from the above base. + */ +#define SA1111_SACR0 0x00 +#define SA1111_SACR1 0x04 +#define SA1111_SACR2 0x08 +#define SA1111_SASR0 0x0c +#define SA1111_SASR1 0x10 +#define SA1111_SASCR 0x18 +#define SA1111_L3_CAR 0x1c +#define SA1111_L3_CDR 0x20 +#define SA1111_ACCAR 0x24 +#define SA1111_ACCDR 0x28 +#define SA1111_ACSAR 0x2c +#define SA1111_ACSDR 0x30 +#define SA1111_SADTCS 0x34 +#define SA1111_SADTSA 0x38 +#define SA1111_SADTCA 0x3c +#define SA1111_SADTSB 0x40 +#define SA1111_SADTCB 0x44 +#define SA1111_SADRCS 0x48 +#define SA1111_SADRSA 0x4c +#define SA1111_SADRCA 0x50 +#define SA1111_SADRSB 0x54 +#define SA1111_SADRCB 0x58 +#define SA1111_SAITR 0x5c +#define SA1111_SADR 0x80 + +#ifndef CONFIG_ARCH_PXA + +#define SACR0_ENB (1<<0) +#define SACR0_BCKD (1<<2) +#define SACR0_RST (1<<3) + +#define SACR1_AMSL (1<<0) +#define SACR1_L3EN (1<<1) +#define SACR1_L3MB (1<<2) +#define SACR1_DREC (1<<3) +#define SACR1_DRPL (1<<4) +#define SACR1_ENLBF (1<<5) + +#define SACR2_TS3V (1<<0) +#define SACR2_TS4V (1<<1) +#define SACR2_WKUP (1<<2) +#define SACR2_DREC (1<<3) +#define SACR2_DRPL (1<<4) +#define SACR2_ENLBF (1<<5) +#define SACR2_RESET (1<<6) + +#define SASR0_TNF (1<<0) +#define SASR0_RNE (1<<1) +#define SASR0_BSY (1<<2) +#define SASR0_TFS (1<<3) +#define SASR0_RFS (1<<4) +#define SASR0_TUR (1<<5) +#define SASR0_ROR (1<<6) +#define SASR0_L3WD (1<<16) +#define SASR0_L3RD (1<<17) + +#define SASR1_TNF (1<<0) +#define SASR1_RNE (1<<1) +#define SASR1_BSY (1<<2) +#define SASR1_TFS (1<<3) +#define SASR1_RFS (1<<4) +#define SASR1_TUR (1<<5) +#define SASR1_ROR (1<<6) +#define SASR1_CADT (1<<16) +#define SASR1_SADR (1<<17) +#define SASR1_RSTO (1<<18) +#define SASR1_CLPM (1<<19) +#define SASR1_CRDY (1<<20) +#define SASR1_RS3V (1<<21) +#define SASR1_RS4V (1<<22) + +#define SASCR_TUR (1<<5) +#define SASCR_ROR (1<<6) +#define SASCR_DTS (1<<16) +#define SASCR_RDD (1<<17) +#define SASCR_STO (1<<18) + +#define SADTCS_TDEN (1<<0) +#define SADTCS_TDIE (1<<1) +#define SADTCS_TDBDA (1<<3) +#define SADTCS_TDSTA (1<<4) +#define SADTCS_TDBDB (1<<5) +#define SADTCS_TDSTB (1<<6) +#define SADTCS_TBIU (1<<7) + +#define SADRCS_RDEN (1<<0) +#define SADRCS_RDIE (1<<1) +#define SADRCS_RDBDA (1<<3) +#define SADRCS_RDSTA (1<<4) +#define SADRCS_RDBDB (1<<5) +#define SADRCS_RDSTB (1<<6) +#define SADRCS_RBIU (1<<7) + +#define SAD_CS_DEN (1<<0) +#define SAD_CS_DIE (1<<1) /* Not functional on metal 1 */ +#define SAD_CS_DBDA (1<<3) /* Not functional on metal 1 */ +#define SAD_CS_DSTA (1<<4) +#define SAD_CS_DBDB (1<<5) /* Not functional on metal 1 */ +#define SAD_CS_DSTB (1<<6) +#define SAD_CS_BIU (1<<7) /* Not functional on metal 1 */ + +#define SAITR_TFS (1<<0) +#define SAITR_RFS (1<<1) +#define SAITR_TUR (1<<2) +#define SAITR_ROR (1<<3) +#define SAITR_CADT (1<<4) +#define SAITR_SADR (1<<5) +#define SAITR_RSTO (1<<6) +#define SAITR_TDBDA (1<<8) +#define SAITR_TDBDB (1<<9) +#define SAITR_RDBDA (1<<10) +#define SAITR_RDBDB (1<<11) + +#endif /* !CONFIG_ARCH_PXA */ + +/* + * General-Purpose I/O Interface + * + * Registers + * PA_DDR GPIO Block A Data Direction + * PA_DRR/PA_DWR GPIO Block A Data Value Register (read/write) + * PA_SDR GPIO Block A Sleep Direction + * PA_SSR GPIO Block A Sleep State + * PB_DDR GPIO Block B Data Direction + * PB_DRR/PB_DWR GPIO Block B Data Value Register (read/write) + * PB_SDR GPIO Block B Sleep Direction + * PB_SSR GPIO Block B Sleep State + * PC_DDR GPIO Block C Data Direction + * PC_DRR/PC_DWR GPIO Block C Data Value Register (read/write) + * PC_SDR GPIO Block C Sleep Direction + * PC_SSR GPIO Block C Sleep State + */ + +#define _PA_DDR _SA1111( 0x1000 ) +#define _PA_DRR _SA1111( 0x1004 ) +#define _PA_DWR _SA1111( 0x1004 ) +#define _PA_SDR _SA1111( 0x1008 ) +#define _PA_SSR _SA1111( 0x100c ) +#define _PB_DDR _SA1111( 0x1010 ) +#define _PB_DRR _SA1111( 0x1014 ) +#define _PB_DWR _SA1111( 0x1014 ) +#define _PB_SDR _SA1111( 0x1018 ) +#define _PB_SSR _SA1111( 0x101c ) +#define _PC_DDR _SA1111( 0x1020 ) +#define _PC_DRR _SA1111( 0x1024 ) +#define _PC_DWR _SA1111( 0x1024 ) +#define _PC_SDR _SA1111( 0x1028 ) +#define _PC_SSR _SA1111( 0x102c ) + +#define SA1111_GPIO 0x1000 + +#define SA1111_GPIO_PADDR (0x000) +#define SA1111_GPIO_PADRR (0x004) +#define SA1111_GPIO_PADWR (0x004) +#define SA1111_GPIO_PASDR (0x008) +#define SA1111_GPIO_PASSR (0x00c) +#define SA1111_GPIO_PBDDR (0x010) +#define SA1111_GPIO_PBDRR (0x014) +#define SA1111_GPIO_PBDWR (0x014) +#define SA1111_GPIO_PBSDR (0x018) +#define SA1111_GPIO_PBSSR (0x01c) +#define SA1111_GPIO_PCDDR (0x020) +#define SA1111_GPIO_PCDRR (0x024) +#define SA1111_GPIO_PCDWR (0x024) +#define SA1111_GPIO_PCSDR (0x028) +#define SA1111_GPIO_PCSSR (0x02c) + +#define GPIO_A0 (1 << 0) +#define GPIO_A1 (1 << 1) +#define GPIO_A2 (1 << 2) +#define GPIO_A3 (1 << 3) + +#define GPIO_B0 (1 << 8) +#define GPIO_B1 (1 << 9) +#define GPIO_B2 (1 << 10) +#define GPIO_B3 (1 << 11) +#define GPIO_B4 (1 << 12) +#define GPIO_B5 (1 << 13) +#define GPIO_B6 (1 << 14) +#define GPIO_B7 (1 << 15) + +#define GPIO_C0 (1 << 16) +#define GPIO_C1 (1 << 17) +#define GPIO_C2 (1 << 18) +#define GPIO_C3 (1 << 19) +#define GPIO_C4 (1 << 20) +#define GPIO_C5 (1 << 21) +#define GPIO_C6 (1 << 22) +#define GPIO_C7 (1 << 23) + +/* + * Interrupt Controller + * + * Registers + * INTTEST0 Test register 0 + * INTTEST1 Test register 1 + * INTEN0 Interrupt Enable register 0 + * INTEN1 Interrupt Enable register 1 + * INTPOL0 Interrupt Polarity selection 0 + * INTPOL1 Interrupt Polarity selection 1 + * INTTSTSEL Interrupt source selection + * INTSTATCLR0 Interrupt Status/Clear 0 + * INTSTATCLR1 Interrupt Status/Clear 1 + * INTSET0 Interrupt source set 0 + * INTSET1 Interrupt source set 1 + * WAKE_EN0 Wake-up source enable 0 + * WAKE_EN1 Wake-up source enable 1 + * WAKE_POL0 Wake-up polarity selection 0 + * WAKE_POL1 Wake-up polarity selection 1 + */ +#define SA1111_INTC 0x1600 + +/* + * These are offsets from the above base. + */ +#define SA1111_INTTEST0 0x0000 +#define SA1111_INTTEST1 0x0004 +#define SA1111_INTEN0 0x0008 +#define SA1111_INTEN1 0x000c +#define SA1111_INTPOL0 0x0010 +#define SA1111_INTPOL1 0x0014 +#define SA1111_INTTSTSEL 0x0018 +#define SA1111_INTSTATCLR0 0x001c +#define SA1111_INTSTATCLR1 0x0020 +#define SA1111_INTSET0 0x0024 +#define SA1111_INTSET1 0x0028 +#define SA1111_WAKEEN0 0x002c +#define SA1111_WAKEEN1 0x0030 +#define SA1111_WAKEPOL0 0x0034 +#define SA1111_WAKEPOL1 0x0038 + +/* + * PS/2 Trackpad and Mouse Interfaces + * + * Registers + * PS2CR Control Register + * PS2STAT Status Register + * PS2DATA Transmit/Receive Data register + * PS2CLKDIV Clock Division Register + * PS2PRECNT Clock Precount Register + * PS2TEST1 Test register 1 + * PS2TEST2 Test register 2 + * PS2TEST3 Test register 3 + * PS2TEST4 Test register 4 + */ + +#define SA1111_KBD 0x0a00 +#define SA1111_MSE 0x0c00 + +/* + * These are offsets from the above bases. + */ +#define SA1111_PS2CR 0x0000 +#define SA1111_PS2STAT 0x0004 +#define SA1111_PS2DATA 0x0008 +#define SA1111_PS2CLKDIV 0x000c +#define SA1111_PS2PRECNT 0x0010 + +#define PS2CR_ENA 0x08 +#define PS2CR_FKD 0x02 +#define PS2CR_FKC 0x01 + +#define PS2STAT_STP 0x0100 +#define PS2STAT_TXE 0x0080 +#define PS2STAT_TXB 0x0040 +#define PS2STAT_RXF 0x0020 +#define PS2STAT_RXB 0x0010 +#define PS2STAT_ENA 0x0008 +#define PS2STAT_RXP 0x0004 +#define PS2STAT_KBD 0x0002 +#define PS2STAT_KBC 0x0001 + +/* + * PCMCIA Interface + * + * Registers + * PCSR Status Register + * PCCR Control Register + * PCSSR Sleep State Register + */ + +#define SA1111_PCMCIA 0x1600 + +/* + * These are offsets from the above base. + */ +#define SA1111_PCCR 0x0000 +#define SA1111_PCSSR 0x0004 +#define SA1111_PCSR 0x0008 + +#define PCSR_S0_READY (1<<0) +#define PCSR_S1_READY (1<<1) +#define PCSR_S0_DETECT (1<<2) +#define PCSR_S1_DETECT (1<<3) +#define PCSR_S0_VS1 (1<<4) +#define PCSR_S0_VS2 (1<<5) +#define PCSR_S1_VS1 (1<<6) +#define PCSR_S1_VS2 (1<<7) +#define PCSR_S0_WP (1<<8) +#define PCSR_S1_WP (1<<9) +#define PCSR_S0_BVD1 (1<<10) +#define PCSR_S0_BVD2 (1<<11) +#define PCSR_S1_BVD1 (1<<12) +#define PCSR_S1_BVD2 (1<<13) + +#define PCCR_S0_RST (1<<0) +#define PCCR_S1_RST (1<<1) +#define PCCR_S0_FLT (1<<2) +#define PCCR_S1_FLT (1<<3) +#define PCCR_S0_PWAITEN (1<<4) +#define PCCR_S1_PWAITEN (1<<5) +#define PCCR_S0_PSE (1<<6) +#define PCCR_S1_PSE (1<<7) + +#define PCSSR_S0_SLEEP (1<<0) +#define PCSSR_S1_SLEEP (1<<1) + + + + +extern struct bus_type sa1111_bus_type; + +#define SA1111_DEVID_SBI 0 +#define SA1111_DEVID_SK 1 +#define SA1111_DEVID_USB 2 +#define SA1111_DEVID_SAC 3 +#define SA1111_DEVID_SSP 4 +#define SA1111_DEVID_PS2 5 +#define SA1111_DEVID_GPIO 6 +#define SA1111_DEVID_INT 7 +#define SA1111_DEVID_PCMCIA 8 + +struct sa1111_dev { + struct device dev; + unsigned int devid; + struct resource res; + void __iomem *mapbase; + unsigned int skpcr_mask; + unsigned int irq[6]; + u64 dma_mask; +}; + +#define SA1111_DEV(_d) container_of((_d), struct sa1111_dev, dev) + +#define sa1111_get_drvdata(d) dev_get_drvdata(&(d)->dev) +#define sa1111_set_drvdata(d,p) dev_set_drvdata(&(d)->dev, p) + +struct sa1111_driver { + struct device_driver drv; + unsigned int devid; + int (*probe)(struct sa1111_dev *); + int (*remove)(struct sa1111_dev *); + int (*suspend)(struct sa1111_dev *, pm_message_t); + int (*resume)(struct sa1111_dev *); +}; + +#define SA1111_DRV(_d) container_of((_d), struct sa1111_driver, drv) + +#define SA1111_DRIVER_NAME(_sadev) ((_sadev)->dev.driver->name) + +/* + * These frob the SKPCR register. + */ +void sa1111_enable_device(struct sa1111_dev *); +void sa1111_disable_device(struct sa1111_dev *); + +unsigned int sa1111_pll_clock(struct sa1111_dev *); + +#define SA1111_AUDIO_ACLINK 0 +#define SA1111_AUDIO_I2S 1 + +void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode); +int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate); +int sa1111_get_audio_rate(struct sa1111_dev *sadev); + +int sa1111_check_dma_bug(dma_addr_t addr); + +int sa1111_driver_register(struct sa1111_driver *); +void sa1111_driver_unregister(struct sa1111_driver *); + +void sa1111_set_io_dir(struct sa1111_dev *sadev, unsigned int bits, unsigned int dir, unsigned int sleep_dir); +void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v); +void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v); + +struct sa1111_platform_data { + int irq_base; /* base for cascaded on-chip IRQs */ +}; + +#endif /* _ASM_ARCH_SA1111 */ diff --git a/arch/arm/include/asm/hardware/scoop.h b/arch/arm/include/asm/hardware/scoop.h new file mode 100644 index 00000000..ebb3ceaa --- /dev/null +++ b/arch/arm/include/asm/hardware/scoop.h @@ -0,0 +1,72 @@ +/* + * Definitions for the SCOOP interface found on various Sharp PDAs + * + * Copyright (c) 2004 Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#define SCOOP_MCR 0x00 +#define SCOOP_CDR 0x04 +#define SCOOP_CSR 0x08 +#define SCOOP_CPR 0x0C +#define SCOOP_CCR 0x10 +#define SCOOP_IRR 0x14 +#define SCOOP_IRM 0x14 +#define SCOOP_IMR 0x18 +#define SCOOP_ISR 0x1C +#define SCOOP_GPCR 0x20 +#define SCOOP_GPWR 0x24 +#define SCOOP_GPRR 0x28 + +#define SCOOP_CPR_OUT (1 << 7) +#define SCOOP_CPR_SD_3V (1 << 2) +#define SCOOP_CPR_CF_XV (1 << 1) +#define SCOOP_CPR_CF_3V (1 << 0) + +#define SCOOP_GPCR_PA22 (1 << 12) +#define SCOOP_GPCR_PA21 (1 << 11) +#define SCOOP_GPCR_PA20 (1 << 10) +#define SCOOP_GPCR_PA19 (1 << 9) +#define SCOOP_GPCR_PA18 (1 << 8) +#define SCOOP_GPCR_PA17 (1 << 7) +#define SCOOP_GPCR_PA16 (1 << 6) +#define SCOOP_GPCR_PA15 (1 << 5) +#define SCOOP_GPCR_PA14 (1 << 4) +#define SCOOP_GPCR_PA13 (1 << 3) +#define SCOOP_GPCR_PA12 (1 << 2) +#define SCOOP_GPCR_PA11 (1 << 1) + +struct scoop_config { + unsigned short io_out; + unsigned short io_dir; + unsigned short suspend_clr; + unsigned short suspend_set; + int gpio_base; +}; + +/* Structure for linking scoop devices to PCMCIA sockets */ +struct scoop_pcmcia_dev { + struct device *dev; /* Pointer to this socket's scoop device */ + int irq; /* irq for socket */ + int cd_irq; + const char *cd_irq_str; + unsigned char keep_vs; + unsigned char keep_rd; +}; + +struct scoop_pcmcia_config { + struct scoop_pcmcia_dev *devs; + int num_devs; + void (*pcmcia_init)(void); + void (*power_ctrl)(struct device *scoop, unsigned short cpr, int nr); +}; + +extern struct scoop_pcmcia_config *platform_scoop_config; + +void reset_scoop(struct device *dev); +unsigned short read_scoop_reg(struct device *dev, unsigned short reg); +void write_scoop_reg(struct device *dev, unsigned short reg, unsigned short data); diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h new file mode 100644 index 00000000..e0d1c0cf --- /dev/null +++ b/arch/arm/include/asm/hardware/sp810.h @@ -0,0 +1,68 @@ +/* + * arch/arm/include/asm/hardware/sp810.h + * + * ARM PrimeXsys System Controller SP810 header file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARM_SP810_H +#define __ASM_ARM_SP810_H + +#include <linux/io.h> + +/* sysctl registers offset */ +#define SCCTRL 0x000 +#define SCSYSSTAT 0x004 +#define SCIMCTRL 0x008 +#define SCIMSTAT 0x00C +#define SCXTALCTRL 0x010 +#define SCPLLCTRL 0x014 +#define SCPLLFCTRL 0x018 +#define SCPERCTRL0 0x01C +#define SCPERCTRL1 0x020 +#define SCPEREN 0x024 +#define SCPERDIS 0x028 +#define SCPERCLKEN 0x02C +#define SCPERSTAT 0x030 +#define SCSYSID0 0xEE0 +#define SCSYSID1 0xEE4 +#define SCSYSID2 0xEE8 +#define SCSYSID3 0xEEC +#define SCITCR 0xF00 +#define SCITIR0 0xF04 +#define SCITIR1 0xF08 +#define SCITOR 0xF0C +#define SCCNTCTRL 0xF10 +#define SCCNTDATA 0xF14 +#define SCCNTSTEP 0xF18 +#define SCPERIPHID0 0xFE0 +#define SCPERIPHID1 0xFE4 +#define SCPERIPHID2 0xFE8 +#define SCPERIPHID3 0xFEC +#define SCPCELLID0 0xFF0 +#define SCPCELLID1 0xFF4 +#define SCPCELLID2 0xFF8 +#define SCPCELLID3 0xFFC + +#define SCCTRL_TIMEREN0SEL_REFCLK (0 << 15) +#define SCCTRL_TIMEREN0SEL_TIMCLK (1 << 15) + +#define SCCTRL_TIMEREN1SEL_REFCLK (0 << 17) +#define SCCTRL_TIMEREN1SEL_TIMCLK (1 << 17) + +static inline void sysctl_soft_reset(void __iomem *base) +{ + /* switch to slow mode */ + writel(0x2, base + SCCTRL); + + /* writing any value to SCSYSSTAT reg will reset system */ + writel(0, base + SCSYSSTAT); +} + +#endif /* __ASM_ARM_SP810_H */ diff --git a/arch/arm/include/asm/hardware/ssp.h b/arch/arm/include/asm/hardware/ssp.h new file mode 100644 index 00000000..3b42e181 --- /dev/null +++ b/arch/arm/include/asm/hardware/ssp.h @@ -0,0 +1,28 @@ +/* + * ssp.h + * + * Copyright (C) 2003 Russell King, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef SSP_H +#define SSP_H + +struct ssp_state { + unsigned int cr0; + unsigned int cr1; +}; + +int ssp_write_word(u16 data); +int ssp_read_word(u16 *data); +int ssp_flush(void); +void ssp_enable(void); +void ssp_disable(void); +void ssp_save_state(struct ssp_state *ssp); +void ssp_restore_state(struct ssp_state *ssp); +int ssp_init(void); +void ssp_exit(void); + +#endif diff --git a/arch/arm/include/asm/hardware/timer-sp.h b/arch/arm/include/asm/hardware/timer-sp.h new file mode 100644 index 00000000..4384d81e --- /dev/null +++ b/arch/arm/include/asm/hardware/timer-sp.h @@ -0,0 +1,2 @@ +void sp804_clocksource_init(void __iomem *, const char *); +void sp804_clockevents_init(void __iomem *, unsigned int, const char *); diff --git a/arch/arm/include/asm/hardware/uengine.h b/arch/arm/include/asm/hardware/uengine.h new file mode 100644 index 00000000..b442d65c --- /dev/null +++ b/arch/arm/include/asm/hardware/uengine.h @@ -0,0 +1,62 @@ +/* + * Generic library functions for the microengines found on the Intel + * IXP2000 series of network processors. + * + * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as + * published by the Free Software Foundation; either version 2.1 of the + * License, or (at your option) any later version. + */ + +#ifndef __IXP2000_UENGINE_H +#define __IXP2000_UENGINE_H + +extern u32 ixp2000_uengine_mask; + +struct ixp2000_uengine_code +{ + u32 cpu_model_bitmask; + u8 cpu_min_revision; + u8 cpu_max_revision; + + u32 uengine_parameters; + + struct ixp2000_reg_value { + int reg; + u32 value; + } *initial_reg_values; + + int num_insns; + u8 *insns; +}; + +u32 ixp2000_uengine_csr_read(int uengine, int offset); +void ixp2000_uengine_csr_write(int uengine, int offset, u32 value); +void ixp2000_uengine_reset(u32 uengine_mask); +void ixp2000_uengine_set_mode(int uengine, u32 mode); +void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns); +void ixp2000_uengine_init_context(int uengine, int context, int pc); +void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask); +void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask); +int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c); + +#define IXP2000_UENGINE_8_CONTEXTS 0x00000000 +#define IXP2000_UENGINE_4_CONTEXTS 0x80000000 +#define IXP2000_UENGINE_PRN_UPDATE_EVERY 0x40000000 +#define IXP2000_UENGINE_PRN_UPDATE_ON_ACCESS 0x00000000 +#define IXP2000_UENGINE_NN_FROM_SELF 0x00100000 +#define IXP2000_UENGINE_NN_FROM_PREVIOUS 0x00000000 +#define IXP2000_UENGINE_ASSERT_EMPTY_AT_3 0x000c0000 +#define IXP2000_UENGINE_ASSERT_EMPTY_AT_2 0x00080000 +#define IXP2000_UENGINE_ASSERT_EMPTY_AT_1 0x00040000 +#define IXP2000_UENGINE_ASSERT_EMPTY_AT_0 0x00000000 +#define IXP2000_UENGINE_LM_ADDR1_GLOBAL 0x00020000 +#define IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT 0x00000000 +#define IXP2000_UENGINE_LM_ADDR0_GLOBAL 0x00010000 +#define IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT 0x00000000 + + +#endif diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h new file mode 100644 index 00000000..5d72550a --- /dev/null +++ b/arch/arm/include/asm/hardware/vic.h @@ -0,0 +1,47 @@ +/* + * arch/arm/include/asm/hardware/vic.h + * + * Copyright (c) ARM Limited 2003. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARM_HARDWARE_VIC_H +#define __ASM_ARM_HARDWARE_VIC_H + +#define VIC_IRQ_STATUS 0x00 +#define VIC_FIQ_STATUS 0x04 +#define VIC_RAW_STATUS 0x08 +#define VIC_INT_SELECT 0x0c /* 1 = FIQ, 0 = IRQ */ +#define VIC_INT_ENABLE 0x10 /* 1 = enable, 0 = disable */ +#define VIC_INT_ENABLE_CLEAR 0x14 +#define VIC_INT_SOFT 0x18 +#define VIC_INT_SOFT_CLEAR 0x1c +#define VIC_PROTECT 0x20 +#define VIC_PL190_VECT_ADDR 0x30 /* PL190 only */ +#define VIC_PL190_DEF_VECT_ADDR 0x34 /* PL190 only */ + +#define VIC_VECT_ADDR0 0x100 /* 0 to 15 (0..31 PL192) */ +#define VIC_VECT_CNTL0 0x200 /* 0 to 15 (0..31 PL192) */ +#define VIC_ITCR 0x300 /* VIC test control register */ + +#define VIC_VECT_CNTL_ENABLE (1 << 5) + +#define VIC_PL192_VECT_ADDR 0xF00 + +#ifndef __ASSEMBLY__ +void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources); +#endif + +#endif |