initial_commit

197 files changed, 27303 insertions, 0 deletions

diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
new file mode 100644
index 00000000..5d43c1f8
--- /dev/null
+++ b/arch/xtensa/Kconfig
@@ -0,0 +1,260 @@
+config FRAME_POINTER
+	def_bool n
+
+config ZONE_DMA
+	def_bool y
+
+config XTENSA
+	def_bool y
+	select HAVE_IDE
+	select HAVE_GENERIC_HARDIRQS
+	select GENERIC_IRQ_SHOW
+	help
+	  Xtensa processors are 32-bit RISC machines designed by Tensilica
+	  primarily for embedded systems.  These processors are both
+	  configurable and extensible.  The Linux port to the Xtensa
+	  architecture supports all processor configurations and extensions,
+	  with reasonable minimum requirements.  The Xtensa Linux project has
+	  a home page at <http://xtensa.sourceforge.net/>.
+
+config RWSEM_XCHGADD_ALGORITHM
+	def_bool y
+
+config GENERIC_HWEIGHT
+	def_bool y
+
+config GENERIC_GPIO
+	def_bool y
+
+config ARCH_HAS_ILOG2_U32
+	def_bool n
+
+config ARCH_HAS_ILOG2_U64
+	def_bool n
+
+config NO_IOPORT
+	def_bool y
+
+config HZ
+	int
+	default 100
+
+source "init/Kconfig"
+source "kernel/Kconfig.freezer"
+
+config MMU
+	def_bool n
+
+config VARIANT_IRQ_SWITCH
+	def_bool n
+
+menu "Processor type and features"
+
+choice
+	prompt "Xtensa Processor Configuration"
+	default XTENSA_VARIANT_FSF
+
+config XTENSA_VARIANT_FSF
+	bool "fsf - default (not generic) configuration"
+	select MMU
+
+config XTENSA_VARIANT_DC232B
+	bool "dc232b - Diamond 232L Standard Core Rev.B (LE)"
+	select MMU
+	help
+	  This variant refers to Tensilica's Diamond 232L Standard core Rev.B (LE).
+
+config XTENSA_VARIANT_S6000
+	bool "s6000 - Stretch software configurable processor"
+	select VARIANT_IRQ_SWITCH
+	select ARCH_REQUIRE_GPIOLIB
+	select XTENSA_CALIBRATE_CCOUNT
+endchoice
+
+config XTENSA_UNALIGNED_USER
+	bool "Unaligned memory access in use space"
+	help
+	  The Xtensa architecture currently does not handle unaligned
+	  memory accesses in hardware but through an exception handler.
+	  Per default, unaligned memory accesses are disabled in user space.
+
+	  Say Y here to enable unaligned memory access in user space.
+
+config PREEMPT
+	bool "Preemptible Kernel"
+	help
+          This option reduces the latency of the kernel when reacting to
+          real-time or interactive events by allowing a low priority process to
+          be preempted even if it is in kernel mode executing a system call.
+          Unfortunately the kernel code has some race conditions if both
+          CONFIG_SMP and CONFIG_PREEMPT are enabled, so this option is
+          currently disabled if you are building an SMP kernel.
+
+          Say Y here if you are building a kernel for a desktop, embedded
+          or real-time system.  Say N if you are unsure.
+
+config MATH_EMULATION
+	bool "Math emulation"
+	help
+	Can we use information of configuration file?
+
+endmenu
+
+config XTENSA_CALIBRATE_CCOUNT
+	def_bool n
+	help
+	  On some platforms (XT2000, for example), the CPU clock rate can
+	  vary.  The frequency can be determined, however, by measuring
+	  against a well known, fixed frequency, such as an UART oscillator.
+
+config SERIAL_CONSOLE
+	def_bool n
+
+config XTENSA_ISS_NETWORK
+	def_bool n
+
+menu "Bus options"
+
+config PCI
+	bool "PCI support"
+	default y
+	help
+	  Find out whether you have a PCI motherboard. PCI is the name of a
+	  bus system, i.e. the way the CPU talks to the other stuff inside
+	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+	  VESA. If you have PCI, say Y, otherwise N.
+
+source "drivers/pci/Kconfig"
+
+endmenu
+
+menu "Platform options"
+
+choice
+	prompt "Xtensa System Type"
+	default XTENSA_PLATFORM_ISS
+
+config XTENSA_PLATFORM_ISS
+	bool "ISS"
+	select XTENSA_CALIBRATE_CCOUNT
+	select SERIAL_CONSOLE
+	select XTENSA_ISS_NETWORK
+	help
+	  ISS is an acronym for Tensilica's Instruction Set Simulator.
+
+config XTENSA_PLATFORM_XT2000
+	bool "XT2000"
+	help
+	  XT2000 is the name of Tensilica's feature-rich emulation platform.
+	  This hardware is capable of running a full Linux distribution.
+
+config XTENSA_PLATFORM_S6105
+	bool "S6105"
+	select SERIAL_CONSOLE
+
+endchoice
+
+
+config XTENSA_CPU_CLOCK
+	int "CPU clock rate [MHz]"
+	depends on !XTENSA_CALIBRATE_CCOUNT
+	default 16
+
+config GENERIC_CALIBRATE_DELAY
+	bool "Auto calibration of the BogoMIPS value"
+	help
+	  The BogoMIPS value can easily be derived from the CPU frequency.
+
+config CMDLINE_BOOL
+	bool "Default bootloader kernel arguments"
+
+config CMDLINE
+	string "Initial kernel command string"
+	depends on CMDLINE_BOOL
+	default "console=ttyS0,38400 root=/dev/ram"
+	help
+	  On some architectures (EBSA110 and CATS), there is currently no way
+	  for the boot loader to pass arguments to the kernel. For these
+	  architectures, you should supply some command-line options at build
+	  time by entering them here. As a minimum, you should specify the
+	  memory size and the root device (e.g., mem=64M root=/dev/nfs).
+
+source "mm/Kconfig"
+
+config HOTPLUG
+	bool "Support for hot-pluggable devices"
+	help
+	  Say Y here if you want to plug devices into your computer while
+	  the system is running, and be able to use them quickly.  In many
+	  cases, the devices can likewise be unplugged at any time too.
+
+	  One well known example of this is PCMCIA- or PC-cards, credit-card
+	  size devices such as network cards, modems or hard drives which are
+	  plugged into slots found on all modern laptop computers.  Another
+	  example, used on modern desktops as well as laptops, is USB.
+
+	  Enable HOTPLUG and build a modular kernel.  Get agent software
+	  (from <http://linux-hotplug.sourceforge.net/>) and install it.
+	  Then your kernel will automatically call out to a user mode "policy
+	  agent" (/sbin/hotplug) to load modules and set up software needed
+	  to use devices as you hotplug them.
+
+source "drivers/pcmcia/Kconfig"
+
+source "drivers/pci/hotplug/Kconfig"
+
+endmenu
+
+menu "Executable file formats"
+
+# only elf supported
+config KCORE_ELF
+	def_bool y
+        depends on PROC_FS
+        help
+          If you enabled support for /proc file system then the file
+          /proc/kcore will contain the kernel core image in ELF format. This
+          can be used in gdb:
+
+          $ cd /usr/src/linux ; gdb vmlinux /proc/kcore
+
+          This is especially useful if you have compiled the kernel with the
+          "-g" option to preserve debugging information. It is mainly used
+	  for examining kernel data structures on the live kernel.
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+menu "Xtensa initrd options"
+	depends on BLK_DEV_INITRD
+
+config EMBEDDED_RAMDISK
+	bool "Embed root filesystem ramdisk into the kernel"
+
+config EMBEDDED_RAMDISK_IMAGE
+	string "Filename of gzipped ramdisk image"
+	depends on EMBEDDED_RAMDISK
+	default "ramdisk.gz"
+	help
+	  This is the filename of the ramdisk image to be built into the
+	  kernel.  Relative pathnames are relative to arch/xtensa/boot/ramdisk/.
+	  The ramdisk image is not part of the kernel distribution; you must
+	  provide one yourself.
+endmenu
+
+source "arch/xtensa/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
+
+
diff --git a/arch/xtensa/Kconfig.debug b/arch/xtensa/Kconfig.debug
new file mode 100644
index 00000000..11c58529
--- /dev/null
+++ b/arch/xtensa/Kconfig.debug
@@ -0,0 +1,7 @@
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+endmenu
+
+
diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile
new file mode 100644
index 00000000..7608559d
--- /dev/null
+++ b/arch/xtensa/Makefile
@@ -0,0 +1,96 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2001 - 2005  Tensilica Inc.
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies. Remember to do have actions
+# for "archclean" and "archdep" for cleaning up and making dependencies for
+# this architecture
+
+# Core configuration.
+# (Use VAR=<xtensa_config> to use another default compiler.)
+
+variant-$(CONFIG_XTENSA_VARIANT_FSF)		:= fsf
+variant-$(CONFIG_XTENSA_VARIANT_DC232B)		:= dc232b
+variant-$(CONFIG_XTENSA_VARIANT_S6000)		:= s6000
+variant-$(CONFIG_XTENSA_VARIANT_LINUX_CUSTOM)	:= custom
+
+VARIANT = $(variant-y)
+export VARIANT
+
+# Platform configuration
+
+platform-$(CONFIG_XTENSA_PLATFORM_XT2000)	:= xt2000
+platform-$(CONFIG_XTENSA_PLATFORM_ISS)		:= iss
+platform-$(CONFIG_XTENSA_PLATFORM_S6105)	:= s6105
+
+PLATFORM = $(platform-y)
+export PLATFORM
+
+# temporarily until string.h is fixed
+KBUILD_CFLAGS += -ffreestanding
+
+KBUILD_CFLAGS += -pipe -mlongcalls
+
+KBUILD_CFLAGS += $(call cc-option,-mforce-no-pic,)
+
+vardirs := $(patsubst %,arch/xtensa/variants/%/,$(variant-y))
+plfdirs := $(patsubst %,arch/xtensa/platforms/%/,$(platform-y))
+
+ifeq ($(KBUILD_SRC),)
+KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(vardirs) $(plfdirs))
+else
+KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(vardirs) $(plfdirs))
+endif
+
+KBUILD_DEFCONFIG := iss_defconfig
+
+# ramdisk/initrd support
+# You need a compressed ramdisk image, named ramdisk.gz in
+# arch/xtensa/boot/ramdisk
+
+core-$(CONFIG_EMBEDDED_RAMDISK)	+= arch/xtensa/boot/ramdisk/
+
+# Test for cross compiling
+
+ifneq ($(VARIANT),)
+  COMPILE_ARCH = $(shell uname -m)
+
+  ifneq ($(COMPILE_ARCH), xtensa)
+    ifndef CROSS_COMPILE
+      CROSS_COMPILE = xtensa_$(VARIANT)-
+    endif
+  endif
+endif
+
+# Only build variant and/or platform if it includes a Makefile
+
+buildvar := $(shell test -a $(srctree)/arch/xtensa/variants/$(VARIANT)/Makefile && echo arch/xtensa/variants/$(VARIANT)/)
+buildplf := $(shell test -a $(srctree)/arch/xtensa/platforms/$(PLATFORM)/Makefile && echo arch/xtensa/platforms/$(PLATFORM)/)
+
+# Find libgcc.a
+
+LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
+
+head-y		:= arch/xtensa/kernel/head.o
+core-y		+= arch/xtensa/kernel/ arch/xtensa/mm/
+core-y		+= $(buildvar) $(buildplf)
+
+libs-y		+= arch/xtensa/lib/ $(LIBGCC)
+
+boot		:= arch/xtensa/boot
+
+all: zImage
+
+bzImage : zImage
+
+zImage zImage.initrd: vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) $@
+
+define archhelp
+  @echo '* zImage      - Compressed kernel image (arch/xtensa/boot/images/zImage.*)'
+endef
+
diff --git a/arch/xtensa/boot/Makefile b/arch/xtensa/boot/Makefile
new file mode 100644
index 00000000..70fd1453
--- /dev/null
+++ b/arch/xtensa/boot/Makefile
@@ -0,0 +1,33 @@
+#
+# arch/xtensa/boot/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+#
+
+
+# KBUILD_CFLAGS used when building rest of boot (takes effect recursively)
+KBUILD_CFLAGS	+= -fno-builtin -Iarch/$(ARCH)/boot/include
+HOSTFLAGS	+= -Iarch/$(ARCH)/boot/include
+
+BIG_ENDIAN	:= $(shell echo -e __XTENSA_EB__ | $(CC) -E - | grep -v "\#")
+
+export ccflags-y
+export BIG_ENDIAN
+
+subdir-y	:= lib
+
+# Subdirs for the boot loader(s)
+
+bootdir-$(CONFIG_XTENSA_PLATFORM_ISS)	 += boot-elf
+bootdir-$(CONFIG_XTENSA_PLATFORM_XT2000) += boot-redboot boot-elf
+
+
+zImage zImage.initrd Image Image.initrd: $(bootdir-y)
+
+$(bootdir-y): $(addprefix $(obj)/,$(subdir-y)) \
+	      $(addprefix $(obj)/,$(host-progs))
+	$(Q)$(MAKE) $(build)=$(obj)/$@ $(MAKECMDGOALS)
+
diff --git a/arch/xtensa/boot/boot-elf/Makefile b/arch/xtensa/boot/boot-elf/Makefile
new file mode 100644
index 00000000..08e8814f
--- /dev/null
+++ b/arch/xtensa/boot/boot-elf/Makefile
@@ -0,0 +1,53 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+GZIP = gzip
+GZIP_FLAGS = -v9fc
+
+ifeq ($(BIG_ENDIAN),1)
+OBJCOPY_ARGS    := -O elf32-xtensa-be
+else
+OBJCOPY_ARGS    := -O elf32-xtensa-le
+endif
+
+export OBJCOPY_ARGS
+export CPPFLAGS_boot.lds += -P -C
+
+boot-y		:= bootstrap.o
+
+OBJS		:= $(addprefix $(obj)/,$(boot-y))
+
+Image:	vmlinux $(OBJS) arch/$(ARCH)/boot/boot-elf/boot.lds
+	$(OBJCOPY) --strip-all -R .comment -R .note.gnu.build-id -O binary \
+		vmlinux vmlinux.tmp
+	$(OBJCOPY) $(OBJCOPY_ARGS) -R .comment \
+		--add-section image=vmlinux.tmp \
+		--set-section-flags image=contents,alloc,load,load,data \
+		$(OBJS) $@.tmp
+	$(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) \
+		-T arch/$(ARCH)/boot/boot-elf/boot.lds \
+		-o arch/$(ARCH)/boot/$@.elf $@.tmp
+	rm -f $@.tmp vmlinux.tmp
+
+Image.initrd:	vmlinux $(OBJS)
+	$(OBJCOPY) --strip-all -R .comment -R .note.gnu.build-id -O binary \
+		--add-section .initrd=arch/$(ARCH)/boot/ramdisk \
+		--set-section-flags .initrd=contents,alloc,load,load,data \
+		vmlinux vmlinux.tmp
+	$(OBJCOPY) $(OBJCOPY_ARGS) -R .comment \
+		--add-section image=vmlinux.tmp \
+		--set-section-flags image=contents,alloc,load,load,data \
+		$(OBJS) $@.tmp
+	$(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) \
+		-T $(srctree)/arch/$(ARCH)/boot/boot-elf/boot.ld \
+		-o arch/$(ARCH)/boot/$@.elf $@.tmp
+	rm -f $@.tmp vmlinux.tmp
+
+
+zImage:	Image
+
+zImage.initrd:	Image.initrd
+
diff --git a/arch/xtensa/boot/boot-elf/boot.lds.S b/arch/xtensa/boot/boot-elf/boot.lds.S
new file mode 100644
index 00000000..4e53b74d
--- /dev/null
+++ b/arch/xtensa/boot/boot-elf/boot.lds.S
@@ -0,0 +1,73 @@
+#include <variant/core.h>
+OUTPUT_ARCH(xtensa)
+ENTRY(_ResetVector)
+
+SECTIONS
+{
+	.start 0xD0000000 : { *(.start) }
+
+	.text 0xD0000000:
+	{
+		__reloc_start = . ;
+		_text_start = . ;
+		*(.literal .text.literal .text)
+		_text_end = . ;
+	}
+
+	.rodata ALIGN(0x04):
+	{
+		*(.rodata)
+		*(.rodata1)
+	}
+
+	.data ALIGN(0x04):
+	{
+		*(.data)
+		*(.data1)
+		*(.sdata)
+		*(.sdata2)
+		*(.got.plt)
+		*(.got)
+		*(.dynamic)
+	}
+
+	__reloc_end = . ;
+
+	.initrd ALIGN(0x10) :
+	{
+		boot_initrd_start = . ;
+		*(.initrd)
+		boot_initrd_end = .;
+	}
+
+	. = ALIGN(0x10);
+	__image_load = . ;
+	.image 0xd0001000:
+	{
+		_image_start = .;
+		*(image)
+		. = (. + 3) & ~ 3;
+		_image_end = .	;
+	}
+
+
+	.bss ((LOADADDR(.image) + SIZEOF(.image) + 3) & ~ 3):
+	{
+		__bss_start = .;
+		*(.sbss)
+		*(.scommon)
+		*(.dynbss)
+		*(.bss)
+		__bss_end = .;
+	}
+	_end = .;
+	_param_start = .;
+
+	.ResetVector.text XCHAL_RESET_VECTOR_VADDR :
+	{
+		*(.ResetVector.text)
+	}
+
+
+	PROVIDE (end = .);
+}
diff --git a/arch/xtensa/boot/boot-elf/bootstrap.S b/arch/xtensa/boot/boot-elf/bootstrap.S
new file mode 100644
index 00000000..464298bc
--- /dev/null
+++ b/arch/xtensa/boot/boot-elf/bootstrap.S
@@ -0,0 +1,33 @@
+
+#include <asm/bootparam.h>
+
+
+/* ResetVector
+ */
+	.section        .ResetVector.text, "ax"
+	.global         _ResetVector
+_ResetVector:
+	_j reset
+	.align 4
+RomInitAddr:
+	.word 0xd0001000
+RomBootParam:
+	.word _bootparam
+reset:
+	l32r    a0, RomInitAddr
+	l32r	a2, RomBootParam
+	movi	a3, 0
+	movi	a4, 0
+	jx      a0
+
+	.align 4
+	.section .bootstrap.data, "aw"
+
+	.globl _bootparam
+_bootparam:
+	.short	BP_TAG_FIRST
+	.short	4
+	.long	BP_VERSION
+	.short	BP_TAG_LAST
+	.short	0
+	.long	0
diff --git a/arch/xtensa/boot/boot-redboot/Makefile b/arch/xtensa/boot/boot-redboot/Makefile
new file mode 100644
index 00000000..872029b8
--- /dev/null
+++ b/arch/xtensa/boot/boot-redboot/Makefile
@@ -0,0 +1,35 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+GZIP = gzip
+GZIP_FLAGS = -v9fc
+ifeq ($(BIG_ENDIAN),1)
+OBJCOPY_ARGS 	:= -O elf32-xtensa-be
+else
+OBJCOPY_ARGS 	:= -O elf32-xtensa-le
+endif
+
+LD_ARGS	= -T $(srctree)/$(obj)/boot.ld
+
+boot-y	:= bootstrap.o
+
+OBJS	:= $(addprefix $(obj)/,$(boot-y))
+LIBS	:= arch/xtensa/boot/lib/lib.a arch/xtensa/lib/lib.a
+
+LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
+
+zImage: vmlinux $(OBJS) $(LIBS)
+	$(OBJCOPY) --strip-all -R .comment -R .note.gnu.build-id -O binary \
+		vmlinux vmlinux.tmp
+	gzip -vf9 vmlinux.tmp
+	$(OBJCOPY) $(OBJCOPY_ARGS) -R .comment \
+		--add-section image=vmlinux.tmp.gz \
+		--set-section-flags image=contents,alloc,load,load,data \
+		$(OBJS) $@.tmp
+	$(LD) $(LD_ARGS) -o $@.elf $@.tmp $(LIBS) -L/xtensa-elf/lib $(LIBGCC)
+	$(OBJCOPY) -S -O binary $@.elf arch/$(ARCH)/boot/$@.redboot
+	rm -f $@.tmp $@.elf vmlinux.tmp.gz
+
diff --git a/arch/xtensa/boot/boot-redboot/boot.ld b/arch/xtensa/boot/boot-redboot/boot.ld
new file mode 100644
index 00000000..774db20d
--- /dev/null
+++ b/arch/xtensa/boot/boot-redboot/boot.ld
@@ -0,0 +1,66 @@
+OUTPUT_ARCH(xtensa)
+
+SECTIONS
+{
+	.start 0xD1000000 : { *(.start) }
+
+	.text :
+	{
+		__reloc_start = . ;
+		_text_start = . ;
+		*(.literal .text.literal .text)
+		_text_end = . ;
+	}
+
+	.rodata ALIGN(0x04):
+	{
+		*(.rodata)
+		*(.rodata1)
+	}
+
+	.data ALIGN(0x04):
+	{
+		*(.data)
+		*(.data1)
+		*(.sdata)
+		*(.sdata2)
+		*(.got.plt)
+		*(.got)
+		*(.dynamic)
+	}
+
+	__reloc_end = . ;
+
+	.initrd ALIGN(0x10) :
+	{
+		boot_initrd_start = . ;
+		*(.initrd)
+		boot_initrd_end = .;
+	}
+
+	. = ALIGN(0x10);
+	__image_load = . ;
+	.image 0xd0001000: AT(__image_load)
+	{
+		_image_start = .;
+		*(image)
+		. = (. + 3) & ~ 3;
+		_image_end = .	;
+	}
+
+
+	.bss ((LOADADDR(.image) + SIZEOF(.image) + 3) & ~ 3):
+	{
+		__bss_start = .;
+		*(.sbss)
+		*(.scommon)
+		*(.dynbss)
+		*(.bss)
+		__bss_end = .;
+	}
+	_end = .;
+	_param_start = .;
+
+
+	PROVIDE (end = .);
+}
diff --git a/arch/xtensa/boot/boot-redboot/bootstrap.S b/arch/xtensa/boot/boot-redboot/bootstrap.S
new file mode 100644
index 00000000..5582e8cf
--- /dev/null
+++ b/arch/xtensa/boot/boot-redboot/bootstrap.S
@@ -0,0 +1,259 @@
+#include <variant/core.h>
+#include <asm/regs.h>
+#include <asm/asmmacro.h>
+#include <asm/cacheasm.h>
+	/*
+	 * RB-Data: RedBoot data/bss
+	 * P:	    Boot-Parameters
+	 * L:	    Kernel-Loader
+	 *
+	 * The Linux-Kernel image including the loader must be loaded
+	 * to a position so that the kernel and the boot parameters
+	 * can fit in the space before the load address.
+	 *  ______________________________________________________
+	 * |_RB-Data_|_P_|__________|_L_|___Linux-Kernel___|______|
+	 *                          ^
+	 *                          ^ Load address
+	 *  ______________________________________________________
+	 * |___Linux-Kernel___|_P_|_L_|___________________________|
+	 *
+	 * The loader copies the parameter to the position that will
+	 * be the end of the kernel and itself to the end of the
+	 * parameter list.
+	 */
+
+/* Make sure we have enough space for the 'uncompressor' */
+
+#define STACK_SIZE 32768
+#define HEAP_SIZE (131072*4)
+
+	# a2: Parameter list
+	# a3: Size of parameter list
+
+	.section .start, "ax"
+
+	.globl __start
+	/* this must be the first byte of the loader! */
+__start:
+	entry	sp, 32		# we do not intend to return
+	_call0	_start
+__start_a0:
+	.align 4
+
+	.section .text, "ax"
+	.begin literal_prefix .text
+
+	/* put literals in here! */
+
+	.globl _start
+_start:
+
+	/* 'reset' window registers */
+
+	movi	a4, 1
+	wsr	a4, PS
+	rsync
+
+	rsr	a5, WINDOWBASE
+	ssl	a5
+	sll	a4, a4
+	wsr	a4, WINDOWSTART
+	rsync
+
+	movi	a4, 0x00040000
+	wsr	a4, PS
+	rsync
+
+	/* copy the loader to its address
+	 * Note: The loader itself is a very small piece, so we assume we
+	 *       don't partially overlap. We also assume (even more important)
+	 *	 that the kernel image is out of the way. Usually, when the
+	 *	 load address of this image is not at an arbitrary address,
+	 *	 but aligned to some 10K's we shouldn't overlap.
+	 */
+
+	/* Note: The assembler cannot relax "addi a0, a0, ..." to an
+	   l32r, so we load to a4 first. */
+
+	# addi	a4, a0, __start - __start_a0
+	# mov	a0, a4
+
+	movi	a4, __start
+	movi	a5, __start_a0
+	add	a4, a0, a4
+	sub	a0, a4, a5
+
+	movi	a4, __start
+	movi	a5, __reloc_end
+
+	# a0: address where this code has been loaded
+	# a4: compiled address of __start
+	# a5: compiled end address
+
+	mov.n	a7, a0
+	mov.n	a8, a4
+
+1:
+	l32i	a10, a7, 0
+	l32i	a11, a7, 4
+	s32i	a10, a8, 0
+	s32i	a11, a8, 4
+	l32i	a10, a7, 8
+	l32i	a11, a7, 12
+	s32i	a10, a8, 8
+	s32i	a11, a8, 12
+	addi	a8, a8, 16
+	addi	a7, a7, 16
+	blt	a8, a5, 1b
+
+
+	/* We have to flush and invalidate the caches here before we jump. */
+
+#if XCHAL_DCACHE_IS_WRITEBACK
+
+	___flush_dcache_all a5 a6
+
+#endif
+
+	___invalidate_icache_all a5 a6
+	isync
+
+	movi	a11, _reloc
+	jx	a11
+
+	.globl _reloc
+_reloc:
+
+	/* RedBoot is now at the end of the memory, so we don't have
+	 * to copy the parameter list. Keep the code around; in case
+	 * we need it again. */
+#if 0
+	# a0: load address
+	# a2: start address of parameter list
+	# a3: length of parameter list
+	# a4: __start
+
+	/* copy the parameter list out of the way */
+
+	movi	a6, _param_start
+	add	a3, a2, a3
+2:
+	l32i	a8, a2, 0
+	s32i	a8, a6, 0
+	addi	a2, a2, 4
+	addi	a6, a6, 4
+	blt	a2, a3, 2b
+#endif
+
+	/* clear BSS section */
+	movi	a6, __bss_start
+	movi	a7, __bss_end
+	movi.n	a5, 0
+3:
+	s32i	a5, a6, 0
+	addi	a6, a6, 4
+	blt	a6, a7, 3b
+
+	movi	a5, -16
+	movi	a1, _stack + STACK_SIZE
+	and	a1, a1, a5
+
+	/* Uncompress the kernel */
+
+	# a0: load address
+	# a2: boot parameter
+	# a4: __start
+
+	movi	a3, __image_load
+	sub	a4, a3, a4
+	add	a8, a0, a4
+
+	# a1  Stack
+	# a8(a4)  Load address of the image
+
+	movi	a6, _image_start
+	movi	a10, _image_end
+	movi	a7, 0x1000000
+	sub	a11, a10, a6
+	movi	a9, complen
+	s32i	a11, a9, 0
+
+	movi	a0, 0
+
+	# a6 destination
+	# a7 maximum size of destination
+	# a8 source
+	# a9 ptr to length
+
+	.extern gunzip
+	movi	a4, gunzip
+	beqz	a4, 1f
+
+	callx4	a4
+
+	j	2f
+
+
+	# a6 destination start
+	# a7 maximum size of destination
+	# a8 source start
+	# a9 ptr to length
+	# a10 destination end
+
+1:
+        l32i    a9, a8, 0
+        l32i    a11, a8, 4
+        s32i    a9, a6, 0
+        s32i    a11, a6, 4
+        l32i    a9, a8, 8
+        l32i    a11, a8, 12
+        s32i    a9, a6, 8
+        s32i    a11, a6, 12
+        addi    a6, a6, 16
+        addi    a8, a8, 16
+        blt     a6, a10, 1b
+
+
+	/* jump to the kernel */
+2:
+#if XCHAL_DCACHE_IS_WRITEBACK
+
+	___flush_dcache_all a5 a6
+
+#endif
+
+	___invalidate_icache_all a5 a6
+
+	isync
+
+	movi	a5, __start
+	movi	a3, boot_initrd_start
+	movi	a4, boot_initrd_end
+	sub	a3, a3, a5
+	sub	a4, a4, a5
+	add	a3, a0, a3
+	add	a4, a0, a4
+
+	# a2  Boot parameter list
+	# a3  initrd_start (virtual load address)
+	# a4  initrd_end   (virtual load address)
+
+	movi	a0, _image_start
+	jx	a0
+
+	.align 16
+	.data
+	.globl avail_ram
+avail_ram:
+	.long	_heap
+	.globl end_avail
+end_avail:
+	.long	_heap + HEAP_SIZE
+
+	.comm _stack, STACK_SIZE
+	.comm _heap, HEAP_SIZE
+
+	.globl end_avail
+	.comm complen, 4
+
+	.end	literal_prefix
diff --git a/arch/xtensa/boot/lib/Makefile b/arch/xtensa/boot/lib/Makefile
new file mode 100644
index 00000000..ad8952e8
--- /dev/null
+++ b/arch/xtensa/boot/lib/Makefile
@@ -0,0 +1,17 @@
+#
+# Makefile for some libs needed by zImage.
+#
+
+zlib	:= inffast.c inflate.c inftrees.c
+
+lib-y	+= $(zlib:.c=.o) zmem.o
+
+ccflags-y	:= -Ilib/zlib_inflate
+
+quiet_cmd_copy_zlib = COPY    $@
+      cmd_copy_zlib = cat $< > $@
+
+$(addprefix $(obj)/,$(zlib)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
+	$(call cmd,copy_zlib)
+
+clean-files	:= $(zlib)
diff --git a/arch/xtensa/boot/lib/zmem.c b/arch/xtensa/boot/lib/zmem.c
new file mode 100644
index 00000000..d9862aa8
--- /dev/null
+++ b/arch/xtensa/boot/lib/zmem.c
@@ -0,0 +1,79 @@
+#include <linux/zlib.h>
+
+/* bits taken from ppc */
+
+extern void *avail_ram, *end_avail;
+
+void exit (void)
+{
+  for (;;);
+}
+
+void *zalloc(unsigned size)
+{
+        void *p = avail_ram;
+
+        size = (size + 7) & -8;
+        avail_ram += size;
+        if (avail_ram > end_avail) {
+                //puts("oops... out of memory\n");
+                //pause();
+                exit ();
+        }
+        return p;
+}
+
+#define HEAD_CRC        2
+#define EXTRA_FIELD     4
+#define ORIG_NAME       8
+#define COMMENT         0x10
+#define RESERVED        0xe0
+
+#define DEFLATED        8
+
+void gunzip (void *dst, int dstlen, unsigned char *src, int *lenp)
+{
+	z_stream s;
+	int r, i, flags;
+
+        /* skip header */
+        i = 10;
+        flags = src[3];
+        if (src[2] != DEFLATED || (flags & RESERVED) != 0) {
+                //puts("bad gzipped data\n");
+                exit();
+        }
+        if ((flags & EXTRA_FIELD) != 0)
+                i = 12 + src[10] + (src[11] << 8);
+        if ((flags & ORIG_NAME) != 0)
+                while (src[i++] != 0)
+                        ;
+        if ((flags & COMMENT) != 0)
+                while (src[i++] != 0)
+                        ;
+        if ((flags & HEAD_CRC) != 0)
+                i += 2;
+        if (i >= *lenp) {
+                //puts("gunzip: ran out of data in header\n");
+                exit();
+        }
+
+	s.workspace = zalloc(zlib_inflate_workspacesize());
+        r = zlib_inflateInit2(&s, -MAX_WBITS);
+        if (r != Z_OK) {
+                //puts("inflateInit2 returned "); puthex(r); puts("\n");
+                exit();
+        }
+        s.next_in = src + i;
+        s.avail_in = *lenp - i;
+        s.next_out = dst;
+        s.avail_out = dstlen;
+        r = zlib_inflate(&s, Z_FINISH);
+        if (r != Z_OK && r != Z_STREAM_END) {
+                //puts("inflate returned "); puthex(r); puts("\n");
+                exit();
+        }
+        *lenp = s.next_out - (unsigned char *) dst;
+        zlib_inflateEnd(&s);
+}
+
diff --git a/arch/xtensa/boot/ramdisk/Makefile b/arch/xtensa/boot/ramdisk/Makefile
new file mode 100644
index 00000000..b12f7635
--- /dev/null
+++ b/arch/xtensa/boot/ramdisk/Makefile
@@ -0,0 +1,23 @@
+#
+# Makefile for a ramdisk image
+#
+
+BIG_ENDIAN	:= $(shell echo -e "\#ifdef __XTENSA_EL__\nint little;\n\#else\nint big;\n\#endif" | $(CC) -E -|grep -c big)
+
+ifeq ($(BIG_ENDIAN),1)
+OBJCOPY_ARGS    := -O elf32-xtensa-be
+else
+OBJCOPY_ARGS    := -O elf32-xtensa-le
+endif
+
+obj-y = ramdisk.o
+
+RAMDISK_IMAGE = arch/$(ARCH)/boot/ramdisk/$(CONFIG_EMBEDDED_RAMDISK_IMAGE)
+
+arch/$(ARCH)/boot/ramdisk/ramdisk.o:
+	$(Q)echo -e "dummy:" | $(AS) -o $@;
+	$(Q)$(OBJCOPY) $(OBJCOPY_ARGS)					    \
+		--add-section .initrd=$(RAMDISK_IMAGE)			    \
+		--set-section-flags .initrd=contents,alloc,load,load,data   \
+		arch/$(ARCH)/boot/ramdisk/ramdisk.o $@
+
diff --git a/arch/xtensa/configs/common_defconfig b/arch/xtensa/configs/common_defconfig
new file mode 100644
index 00000000..b90038e4
--- /dev/null
+++ b/arch/xtensa/configs/common_defconfig
@@ -0,0 +1,662 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.11-rc2
+# Tue Mar  1 16:36:53 2005
+#
+# CONFIG_FRAME_POINTER is not set
+CONFIG_XTENSA=y
+# CONFIG_UID16 is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_HAVE_DEC_LOCK=y
+CONFIG_GENERIC_HARDIRQS=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_EXPERT is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Processor type and features
+#
+CONFIG_XTENSA_ARCH_LINUX_BE=y
+# CONFIG_XTENSA_ARCH_LINUX_LE is not set
+# CONFIG_XTENSA_ARCH_LINUX_TEST is not set
+# CONFIG_XTENSA_ARCH_S5 is not set
+# CONFIG_XTENSA_CUSTOM is not set
+CONFIG_MMU=y
+# CONFIG_XTENSA_UNALIGNED_USER is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_HIGHMEM is not set
+
+#
+# Platform options
+#
+# CONFIG_XTENSA_PLATFORM_ISS is not set
+CONFIG_XTENSA_PLATFORM_XT2000=y
+CONFIG_XTENSA_CALIBRATE_CCOUNT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS0,38400 ip=bootp root=nfs nfsroot=/opt/montavista/pro/devkit/xtensa/linux_be/target"
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+# CONFIG_PCI_LEGACY_PROC is not set
+# CONFIG_PCI_NAMES is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PC-card bridges
+#
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Exectuable file formats
+#
+CONFIG_KCORE_ELF=y
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_IP_TCPDIAG is not set
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+# CONFIG_NET_SCH_HFSC is not set
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+# CONFIG_NET_SCH_NETEM is not set
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_POLICE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_XT2000_SONIC=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+CONFIG_STRIP=m
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=m
+# CONFIG_PLX_HERMES is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_PCI_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+# CONFIG_PRISM54 is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB is not set
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_SYSFS=y
+CONFIG_DEVFS_FS=y
+# CONFIG_DEVFS_MOUNT is not set
+# CONFIG_DEVFS_DEBUG is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+# CONFIG_EXPORTFS is not set
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC32 is not set
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/xtensa/configs/iss_defconfig b/arch/xtensa/configs/iss_defconfig
new file mode 100644
index 00000000..0234cd19
--- /dev/null
+++ b/arch/xtensa/configs/iss_defconfig
@@ -0,0 +1,766 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.34-rc6
+# Tue Aug  3 00:10:54 2010
+#
+# CONFIG_FRAME_POINTER is not set
+CONFIG_ZONE_DMA=y
+CONFIG_XTENSA=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_NO_IOPORT=y
+CONFIG_HZ=100
+CONFIG_GENERIC_TIME=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EXPERT=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+CONFIG_MMU=y
+# CONFIG_VARIANT_IRQ_SWITCH is not set
+
+#
+# Processor type and features
+#
+CONFIG_XTENSA_VARIANT_FSF=y
+# CONFIG_XTENSA_VARIANT_DC232B is not set
+# CONFIG_XTENSA_VARIANT_S6000 is not set
+# CONFIG_XTENSA_UNALIGNED_USER is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_MATH_EMULATION is not set
+CONFIG_XTENSA_CALIBRATE_CCOUNT=y
+CONFIG_SERIAL_CONSOLE=y
+CONFIG_XTENSA_ISS_NETWORK=y
+
+#
+# Bus options
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Platform options
+#
+CONFIG_XTENSA_PLATFORM_ISS=y
+# CONFIG_XTENSA_PLATFORM_XT2000 is not set
+# CONFIG_XTENSA_PLATFORM_S6105 is not set
+# CONFIG_GENERIC_CALIBRATE_DELAY is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS0,38400 eth0=tuntap,,tap0 ip=192.168.168.5:192.168.168.1 root=nfs nfsroot=192.168.168.1:/opt/montavista/pro/devkit/xtensa/linux_be/target"
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+
+#
+# Executable file formats
+#
+CONFIG_KCORE_ELF=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_TIMBERDALE is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_DETECTOR=y
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=y
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/xtensa/configs/s6105_defconfig b/arch/xtensa/configs/s6105_defconfig
new file mode 100644
index 00000000..4891abbf
--- /dev/null
+++ b/arch/xtensa/configs/s6105_defconfig
@@ -0,0 +1,625 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc7-s6
+# Tue Mar 10 11:09:26 2009
+#
+# CONFIG_FRAME_POINTER is not set
+CONFIG_ZONE_DMA=y
+CONFIG_XTENSA=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_NO_IOPORT=y
+CONFIG_HZ=100
+CONFIG_GENERIC_TIME=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+# CONFIG_TREE_RCU is not set
+CONFIG_PREEMPT_RCU=y
+# CONFIG_RCU_TRACE is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EXPERT=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+# CONFIG_MMU is not set
+CONFIG_VARIANT_IRQ_SWITCH=y
+
+#
+# Processor type and features
+#
+# CONFIG_XTENSA_VARIANT_FSF is not set
+# CONFIG_XTENSA_VARIANT_DC232B is not set
+CONFIG_XTENSA_VARIANT_S6000=y
+# CONFIG_XTENSA_UNALIGNED_USER is not set
+CONFIG_PREEMPT=y
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_XTENSA_CALIBRATE_CCOUNT=y
+CONFIG_SERIAL_CONSOLE=y
+# CONFIG_XTENSA_ISS_NETWORK is not set
+
+#
+# Bus options
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Platform options
+#
+# CONFIG_XTENSA_PLATFORM_ISS is not set
+# CONFIG_XTENSA_PLATFORM_XT2000 is not set
+CONFIG_XTENSA_PLATFORM_S6105=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS1,38400 debug bootmem_debug loglevel=7"
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+
+#
+# Executable file formats
+#
+CONFIG_KCORE_ELF=y
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NETDEV_1000=y
+CONFIG_S6GMAC=y
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+# CONFIG_RTC_INTF_SYSFS is not set
+# CONFIG_RTC_INTF_PROC is not set
+# CONFIG_RTC_INTF_DEV is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+CONFIG_RTC_DRV_M41T80=y
+# CONFIG_RTC_DRV_M41T80_WDT is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Xtensa initrd options
+#
+# CONFIG_EMBEDDED_RAMDISK is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_DEBUG_NOMMU_REGIONS=y
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/xtensa/include/asm/Kbuild b/arch/xtensa/include/asm/Kbuild
new file mode 100644
index 00000000..c68e1680
--- /dev/null
+++ b/arch/xtensa/include/asm/Kbuild
@@ -0,0 +1 @@
+include include/asm-generic/Kbuild.asm
diff --git a/arch/xtensa/include/asm/asm-offsets.h b/arch/xtensa/include/asm/asm-offsets.h
new file mode 100644
index 00000000..d370ee36
--- /dev/null
+++ b/arch/xtensa/include/asm/asm-offsets.h
@@ -0,0 +1 @@
+#include <generated/asm-offsets.h>
diff --git a/arch/xtensa/include/asm/asmmacro.h b/arch/xtensa/include/asm/asmmacro.h
new file mode 100644
index 00000000..755320f6
--- /dev/null
+++ b/arch/xtensa/include/asm/asmmacro.h
@@ -0,0 +1,153 @@
+/*
+ * include/asm-xtensa/asmmacro.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_ASMMACRO_H
+#define _XTENSA_ASMMACRO_H
+
+#include <variant/core.h>
+
+/*
+ * Some little helpers for loops. Use zero-overhead-loops
+ * where applicable and if supported by the processor.
+ *
+ * __loopi ar, at, size, inc
+ *         ar	register initialized with the start address
+ *	   at	scratch register used by macro
+ *	   size	size immediate value
+ *	   inc	increment
+ *
+ * __loops ar, as, at, inc_log2[, mask_log2][, cond][, ncond]
+ *	   ar	register initialized with the start address
+ *	   as	register initialized with the size
+ *	   at	scratch register use by macro
+ *	   inc_log2	increment [in log2]
+ *	   mask_log2	mask [in log2]
+ *	   cond		true condition (used in loop'cond')
+ *	   ncond	false condition (used in b'ncond')
+ *
+ * __loop  as
+ *	   restart loop. 'as' register must not have been modified!
+ *
+ * __endla ar, at, incr
+ *	   ar	start address (modified)
+ *	   as	scratch register used by macro
+ *	   inc	increment
+ */
+
+/*
+ * loop for given size as immediate
+ */
+
+	.macro	__loopi ar, at, size, incr
+
+#if XCHAL_HAVE_LOOPS
+		movi	\at, ((\size + \incr - 1) / (\incr))
+		loop	\at, 99f
+#else
+		addi	\at, \ar, \size
+		98:
+#endif
+
+	.endm
+
+/*
+ * loop for given size in register
+ */
+
+	.macro	__loops	ar, as, at, incr_log2, mask_log2, cond, ncond
+
+#if XCHAL_HAVE_LOOPS
+		.ifgt \incr_log2 - 1
+			addi	\at, \as, (1 << \incr_log2) - 1
+			.ifnc \mask_log2,
+				extui	\at, \at, \incr_log2, \mask_log2
+			.else
+				srli	\at, \at, \incr_log2
+			.endif
+		.endif
+		loop\cond	\at, 99f
+#else
+		.ifnc \mask_log2,
+			extui	\at, \as, \incr_log2, \mask_log2
+		.else
+			.ifnc \ncond,
+				srli	\at, \as, \incr_log2
+			.endif
+		.endif
+		.ifnc \ncond,
+			b\ncond	\at, 99f
+
+		.endif
+		.ifnc \mask_log2,
+			slli	\at, \at, \incr_log2
+			add	\at, \ar, \at
+		.else
+			add	\at, \ar, \as
+		.endif
+#endif
+		98:
+
+	.endm
+
+/*
+ * loop from ar to ax
+ */
+
+	.macro	__loopt	ar, as, at, incr_log2
+
+#if XCHAL_HAVE_LOOPS
+		sub	\at, \as, \ar
+		.ifgt	\incr_log2 - 1
+			addi	\at, \at, (1 << \incr_log2) - 1
+			srli	\at, \at, \incr_log2
+		.endif
+		loop	\at, 99f
+#else
+		98:
+#endif
+
+	.endm
+
+/*
+ * restart loop. registers must be unchanged
+ */
+
+	.macro	__loop	as
+
+#if XCHAL_HAVE_LOOPS
+		loop	\as, 99f
+#else
+		98:
+#endif
+
+	.endm
+
+/*
+ * end of loop with no increment of the address.
+ */
+
+	.macro	__endl	ar, as
+#if !XCHAL_HAVE_LOOPS
+		bltu	\ar, \as, 98b
+#endif
+		99:
+	.endm
+
+/*
+ * end of loop with increment of the address.
+ */
+
+	.macro	__endla	ar, as, incr
+		addi	\ar, \ar, \incr
+		__endl	\ar \as
+	.endm
+
+
+#endif /* _XTENSA_ASMMACRO_H */
diff --git a/arch/xtensa/include/asm/atomic.h b/arch/xtensa/include/asm/atomic.h
new file mode 100644
index 00000000..a96a0619
--- /dev/null
+++ b/arch/xtensa/include/asm/atomic.h
@@ -0,0 +1,299 @@
+/*
+ * include/asm-xtensa/atomic.h
+ *
+ * Atomic operations that C can't guarantee us.  Useful for resource counting..
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_ATOMIC_H
+#define _XTENSA_ATOMIC_H
+
+#include <linux/stringify.h>
+#include <linux/types.h>
+
+#ifdef __KERNEL__
+#include <asm/processor.h>
+#include <asm/system.h>
+
+#define ATOMIC_INIT(i)	{ (i) }
+
+/*
+ * This Xtensa implementation assumes that the right mechanism
+ * for exclusion is for locking interrupts to level 1.
+ *
+ * Locking interrupts looks like this:
+ *
+ *    rsil a15, 1
+ *    <code>
+ *    wsr  a15, PS
+ *    rsync
+ *
+ * Note that a15 is used here because the register allocation
+ * done by the compiler is not guaranteed and a window overflow
+ * may not occur between the rsil and wsr instructions. By using
+ * a15 in the rsil, the machine is guaranteed to be in a state
+ * where no register reference will cause an overflow.
+ */
+
+/**
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically reads the value of @v.
+ */
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
+
+/**
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.
+ */
+#define atomic_set(v,i)		((v)->counter = (i))
+
+/**
+ * atomic_add - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v.
+ */
+static inline void atomic_add(int i, atomic_t * v)
+{
+    unsigned int vval;
+
+    __asm__ __volatile__(
+	"rsil    a15, "__stringify(LOCKLEVEL)"\n\t"
+	"l32i    %0, %2, 0              \n\t"
+	"add     %0, %0, %1             \n\t"
+	"s32i    %0, %2, 0              \n\t"
+	"wsr     a15, "__stringify(PS)"       \n\t"
+	"rsync                          \n"
+	: "=&a" (vval)
+	: "a" (i), "a" (v)
+	: "a15", "memory"
+	);
+}
+
+/**
+ * atomic_sub - subtract the atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v.
+ */
+static inline void atomic_sub(int i, atomic_t *v)
+{
+    unsigned int vval;
+
+    __asm__ __volatile__(
+	"rsil    a15, "__stringify(LOCKLEVEL)"\n\t"
+	"l32i    %0, %2, 0              \n\t"
+	"sub     %0, %0, %1             \n\t"
+	"s32i    %0, %2, 0              \n\t"
+	"wsr     a15, "__stringify(PS)"       \n\t"
+	"rsync                          \n"
+	: "=&a" (vval)
+	: "a" (i), "a" (v)
+	: "a15", "memory"
+	);
+}
+
+/*
+ * We use atomic_{add|sub}_return to define other functions.
+ */
+
+static inline int atomic_add_return(int i, atomic_t * v)
+{
+     unsigned int vval;
+
+    __asm__ __volatile__(
+	"rsil    a15,"__stringify(LOCKLEVEL)"\n\t"
+	"l32i    %0, %2, 0             \n\t"
+	"add     %0, %0, %1            \n\t"
+	"s32i    %0, %2, 0             \n\t"
+	"wsr     a15, "__stringify(PS)"      \n\t"
+	"rsync                         \n"
+	: "=&a" (vval)
+	: "a" (i), "a" (v)
+	: "a15", "memory"
+	);
+
+    return vval;
+}
+
+static inline int atomic_sub_return(int i, atomic_t * v)
+{
+    unsigned int vval;
+
+    __asm__ __volatile__(
+	"rsil    a15,"__stringify(LOCKLEVEL)"\n\t"
+	"l32i    %0, %2, 0             \n\t"
+	"sub     %0, %0, %1            \n\t"
+	"s32i    %0, %2, 0             \n\t"
+	"wsr     a15, "__stringify(PS)"       \n\t"
+	"rsync                         \n"
+	: "=&a" (vval)
+	: "a" (i), "a" (v)
+	: "a15", "memory"
+	);
+
+    return vval;
+}
+
+/**
+ * atomic_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_sub_and_test(i,v) (atomic_sub_return((i),(v)) == 0)
+
+/**
+ * atomic_inc - increment atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1.
+ */
+#define atomic_inc(v) atomic_add(1,(v))
+
+/**
+ * atomic_inc - increment atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1.
+ */
+#define atomic_inc_return(v) atomic_add_return(1,(v))
+
+/**
+ * atomic_dec - decrement atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1.
+ */
+#define atomic_dec(v) atomic_sub(1,(v))
+
+/**
+ * atomic_dec_return - decrement atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1.
+ */
+#define atomic_dec_return(v) atomic_sub_return(1,(v))
+
+/**
+ * atomic_dec_and_test - decrement and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+#define atomic_dec_and_test(v) (atomic_sub_return(1,(v)) == 0)
+
+/**
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_add_return(1,(v)) == 0)
+
+/**
+ * atomic_add_negative - add and test if negative
+ * @v: pointer of type atomic_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @v and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+#define atomic_add_negative(i,v) (atomic_add_return((i),(v)) < 0)
+
+#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+/**
+ * atomic_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int c, old;
+	c = atomic_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
+{
+    unsigned int all_f = -1;
+    unsigned int vval;
+
+    __asm__ __volatile__(
+	"rsil    a15,"__stringify(LOCKLEVEL)"\n\t"
+	"l32i    %0, %2, 0             \n\t"
+	"xor     %1, %4, %3            \n\t"
+	"and     %0, %0, %4            \n\t"
+	"s32i    %0, %2, 0             \n\t"
+	"wsr     a15, "__stringify(PS)"      \n\t"
+	"rsync                         \n"
+	: "=&a" (vval), "=a" (mask)
+	: "a" (v), "a" (all_f), "1" (mask)
+	: "a15", "memory"
+	);
+}
+
+static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
+{
+    unsigned int vval;
+
+    __asm__ __volatile__(
+	"rsil    a15,"__stringify(LOCKLEVEL)"\n\t"
+	"l32i    %0, %2, 0             \n\t"
+	"or      %0, %0, %1            \n\t"
+	"s32i    %0, %2, 0             \n\t"
+	"wsr     a15, "__stringify(PS)"       \n\t"
+	"rsync                         \n"
+	: "=&a" (vval)
+	: "a" (mask), "a" (v)
+	: "a15", "memory"
+	);
+}
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#include <asm-generic/atomic-long.h>
+#endif /* __KERNEL__ */
+
+#endif /* _XTENSA_ATOMIC_H */
+
diff --git a/arch/xtensa/include/asm/auxvec.h b/arch/xtensa/include/asm/auxvec.h
new file mode 100644
index 00000000..257dec75
--- /dev/null
+++ b/arch/xtensa/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef __XTENSA_AUXVEC_H
+#define __XTENSA_AUXVEC_H
+
+#endif
diff --git a/arch/xtensa/include/asm/bitops.h b/arch/xtensa/include/asm/bitops.h
new file mode 100644
index 00000000..c8fac8d8
--- /dev/null
+++ b/arch/xtensa/include/asm/bitops.h
@@ -0,0 +1,131 @@
+/*
+ * include/asm-xtensa/bitops.h
+ *
+ * Atomic operations that C can't guarantee us.Useful for resource counting etc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2007 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_BITOPS_H
+#define _XTENSA_BITOPS_H
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <asm/processor.h>
+#include <asm/byteorder.h>
+#include <asm/system.h>
+
+#ifdef CONFIG_SMP
+# error SMP not supported on this architecture
+#endif
+
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+
+#include <asm-generic/bitops/atomic.h>
+#include <asm-generic/bitops/non-atomic.h>
+
+#if XCHAL_HAVE_NSA
+
+static inline unsigned long __cntlz (unsigned long x)
+{
+	int lz;
+	asm ("nsau %0, %1" : "=r" (lz) : "r" (x));
+	return lz;
+}
+
+/*
+ * ffz: Find first zero in word. Undefined if no zero exists.
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ */
+
+static inline int ffz(unsigned long x)
+{
+	return 31 - __cntlz(~x & -~x);
+}
+
+/*
+ * __ffs: Find first bit set in word. Return 0 for bit 0
+ */
+
+static inline int __ffs(unsigned long x)
+{
+	return 31 - __cntlz(x & -x);
+}
+
+/*
+ * ffs: Find first bit set in word. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+
+static inline int ffs(unsigned long x)
+{
+	return 32 - __cntlz(x & -x);
+}
+
+/*
+ * fls: Find last (most-significant) bit set in word.
+ * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
+ */
+
+static inline int fls (unsigned int x)
+{
+	return 32 - __cntlz(x);
+}
+
+/**
+ * __fls - find last (most-significant) set bit in a long word
+ * @word: the word to search
+ *
+ * Undefined if no set bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __fls(unsigned long word)
+{
+	return 31 - __cntlz(word);
+}
+#else
+
+/* Use the generic implementation if we don't have the nsa/nsau instructions. */
+
+# include <asm-generic/bitops/ffs.h>
+# include <asm-generic/bitops/__ffs.h>
+# include <asm-generic/bitops/ffz.h>
+# include <asm-generic/bitops/fls.h>
+# include <asm-generic/bitops/__fls.h>
+
+#endif
+
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/le.h>
+
+#ifdef __XTENSA_EL__
+# define ext2_set_bit_atomic(lock,nr,addr)				\
+	test_and_set_bit((nr), (unsigned long*)(addr))
+# define ext2_clear_bit_atomic(lock,nr,addr)				\
+	test_and_clear_bit((nr), (unsigned long*)(addr))
+#elif defined(__XTENSA_EB__)
+# define ext2_set_bit_atomic(lock,nr,addr)				\
+	test_and_set_bit((nr) ^ 0x18, (unsigned long*)(addr))
+# define ext2_clear_bit_atomic(lock,nr,addr)				\
+	test_and_clear_bit((nr) ^ 0x18, (unsigned long*)(addr))
+#else
+# error processor byte order undefined!
+#endif
+
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+#include <asm-generic/bitops/sched.h>
+
+#endif	/* __KERNEL__ */
+
+#endif	/* _XTENSA_BITOPS_H */
diff --git a/arch/xtensa/include/asm/bitsperlong.h b/arch/xtensa/include/asm/bitsperlong.h
new file mode 100644
index 00000000..6dc0bb0c
--- /dev/null
+++ b/arch/xtensa/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/arch/xtensa/include/asm/bootparam.h b/arch/xtensa/include/asm/bootparam.h
new file mode 100644
index 00000000..9983f2c1
--- /dev/null
+++ b/arch/xtensa/include/asm/bootparam.h
@@ -0,0 +1,61 @@
+/*
+ * include/asm-xtensa/bootparam.h
+ *
+ * Definition of the Linux/Xtensa boot parameter structure
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005  Tensilica Inc.
+ *
+ * (Concept borrowed from the 68K port)
+ */
+
+#ifndef _XTENSA_BOOTPARAM_H
+#define _XTENSA_BOOTPARAM_H
+
+#define BP_VERSION 0x0001
+
+#define BP_TAG_COMMAND_LINE	0x1001	/* command line (0-terminated string)*/
+#define BP_TAG_INITRD		0x1002	/* ramdisk addr and size (bp_meminfo) */
+#define BP_TAG_MEMORY		0x1003	/* memory addr and size (bp_meminfo) */
+#define BP_TAG_SERIAL_BAUSRATE	0x1004	/* baud rate of current console. */
+#define BP_TAG_SERIAL_PORT	0x1005	/* serial device of current console */
+
+#define BP_TAG_FIRST		0x7B0B  /* first tag with a version number */
+#define BP_TAG_LAST 		0x7E0B	/* last tag */
+
+#ifndef __ASSEMBLY__
+
+/* All records are aligned to 4 bytes */
+
+typedef struct bp_tag {
+  unsigned short id;		/* tag id */
+  unsigned short size;		/* size of this record excluding the structure*/
+  unsigned long data[0];	/* data */
+} bp_tag_t;
+
+typedef struct meminfo {
+  unsigned long type;
+  unsigned long start;
+  unsigned long end;
+} meminfo_t;
+
+#define SYSMEM_BANKS_MAX 5
+
+#define MEMORY_TYPE_CONVENTIONAL	0x1000
+#define MEMORY_TYPE_NONE		0x2000
+
+typedef struct sysmem_info {
+  int nr_banks;
+  meminfo_t bank[SYSMEM_BANKS_MAX];
+} sysmem_info_t;
+
+extern sysmem_info_t sysmem;
+
+#endif
+#endif
+
+
+
diff --git a/arch/xtensa/include/asm/bug.h b/arch/xtensa/include/asm/bug.h
new file mode 100644
index 00000000..3e52d727
--- /dev/null
+++ b/arch/xtensa/include/asm/bug.h
@@ -0,0 +1,18 @@
+/*
+ * include/asm-xtensa/bug.h
+ *
+ * Macros to cause a 'bug' message.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_BUG_H
+#define _XTENSA_BUG_H
+
+#include <asm-generic/bug.h>
+
+#endif	/* _XTENSA_BUG_H */
diff --git a/arch/xtensa/include/asm/bugs.h b/arch/xtensa/include/asm/bugs.h
new file mode 100644
index 00000000..69b29d19
--- /dev/null
+++ b/arch/xtensa/include/asm/bugs.h
@@ -0,0 +1,18 @@
+/*
+ * include/asm-xtensa/bugs.h
+ *
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Xtensa processors don't have any bugs.  :)
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of
+ * this archive for more details.
+ */
+
+#ifndef _XTENSA_BUGS_H
+#define _XTENSA_BUGS_H
+
+static void check_bugs(void) { }
+
+#endif /* _XTENSA_BUGS_H */
diff --git a/arch/xtensa/include/asm/byteorder.h b/arch/xtensa/include/asm/byteorder.h
new file mode 100644
index 00000000..54eb6315
--- /dev/null
+++ b/arch/xtensa/include/asm/byteorder.h
@@ -0,0 +1,12 @@
+#ifndef _XTENSA_BYTEORDER_H
+#define _XTENSA_BYTEORDER_H
+
+#ifdef __XTENSA_EL__
+#include <linux/byteorder/little_endian.h>
+#elif defined(__XTENSA_EB__)
+#include <linux/byteorder/big_endian.h>
+#else
+# error processor byte order undefined!
+#endif
+
+#endif /* _XTENSA_BYTEORDER_H */
diff --git a/arch/xtensa/include/asm/cache.h b/arch/xtensa/include/asm/cache.h
new file mode 100644
index 00000000..d2fd932f
--- /dev/null
+++ b/arch/xtensa/include/asm/cache.h
@@ -0,0 +1,34 @@
+/*
+ * include/asm-xtensa/cache.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_CACHE_H
+#define _XTENSA_CACHE_H
+
+#include <variant/core.h>
+
+#define L1_CACHE_SHIFT	XCHAL_DCACHE_LINEWIDTH
+#define L1_CACHE_BYTES	XCHAL_DCACHE_LINESIZE
+#define SMP_CACHE_BYTES	L1_CACHE_BYTES
+
+#define DCACHE_WAY_SIZE	(XCHAL_DCACHE_SIZE/XCHAL_DCACHE_WAYS)
+#define ICACHE_WAY_SIZE	(XCHAL_ICACHE_SIZE/XCHAL_ICACHE_WAYS)
+#define DCACHE_WAY_SHIFT (XCHAL_DCACHE_SETWIDTH + XCHAL_DCACHE_LINEWIDTH)
+#define ICACHE_WAY_SHIFT (XCHAL_ICACHE_SETWIDTH + XCHAL_ICACHE_LINEWIDTH)
+
+/* Maximum cache size per way. */
+#if DCACHE_WAY_SIZE >= ICACHE_WAY_SIZE
+# define CACHE_WAY_SIZE DCACHE_WAY_SIZE
+#else
+# define CACHE_WAY_SIZE ICACHE_WAY_SIZE
+#endif
+
+#define ARCH_DMA_MINALIGN	L1_CACHE_BYTES
+
+#endif	/* _XTENSA_CACHE_H */
diff --git a/arch/xtensa/include/asm/cacheasm.h b/arch/xtensa/include/asm/cacheasm.h
new file mode 100644
index 00000000..2c20a58f
--- /dev/null
+++ b/arch/xtensa/include/asm/cacheasm.h
@@ -0,0 +1,177 @@
+/*
+ * include/asm-xtensa/cacheasm.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 Tensilica Inc.
+ */
+
+#include <asm/cache.h>
+#include <asm/asmmacro.h>
+#include <linux/stringify.h>
+
+/*
+ * Define cache functions as macros here so that they can be used
+ * by the kernel and boot loader. We should consider moving them to a
+ * library that can be linked by both.
+ *
+ * Locking
+ *
+ *   ___unlock_dcache_all
+ *   ___unlock_icache_all
+ *
+ * Flush and invaldating
+ *
+ *   ___flush_invalidate_dcache_{all|range|page}
+ *   ___flush_dcache_{all|range|page}
+ *   ___invalidate_dcache_{all|range|page}
+ *   ___invalidate_icache_{all|range|page}
+ *
+ */
+
+	.macro	__loop_cache_all ar at insn size line_width
+
+	movi	\ar, 0
+
+	__loopi	\ar, \at, \size, (4 << (\line_width))
+	\insn	\ar, 0 << (\line_width)
+	\insn	\ar, 1 << (\line_width)
+	\insn	\ar, 2 << (\line_width)
+	\insn	\ar, 3 << (\line_width)
+	__endla	\ar, \at, 4 << (\line_width)
+
+	.endm
+
+
+	.macro	__loop_cache_range ar as at insn line_width
+
+	extui	\at, \ar, 0, \line_width
+	add	\as, \as, \at
+
+	__loops	\ar, \as, \at, \line_width
+	\insn	\ar, 0
+	__endla	\ar, \at, (1 << (\line_width))
+
+	.endm
+
+
+	.macro	__loop_cache_page ar at insn line_width
+
+	__loopi	\ar, \at, PAGE_SIZE, 4 << (\line_width)
+	\insn	\ar, 0 << (\line_width)
+	\insn	\ar, 1 << (\line_width)
+	\insn	\ar, 2 << (\line_width)
+	\insn	\ar, 3 << (\line_width)
+	__endla	\ar, \at, 4 << (\line_width)
+
+	.endm
+
+
+#if XCHAL_DCACHE_LINE_LOCKABLE
+
+	.macro	___unlock_dcache_all ar at
+
+	__loop_cache_all \ar \at diu XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH
+
+	.endm
+
+#endif
+
+#if XCHAL_ICACHE_LINE_LOCKABLE
+
+	.macro	___unlock_icache_all ar at
+
+	__loop_cache_all \ar \at iiu XCHAL_ICACHE_SIZE XCHAL_ICACHE_LINEWIDTH
+
+	.endm
+#endif
+
+	.macro	___flush_invalidate_dcache_all ar at
+
+	__loop_cache_all \ar \at diwbi XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH
+
+	.endm
+
+
+	.macro	___flush_dcache_all ar at
+
+	__loop_cache_all \ar \at diwb XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH
+
+	.endm
+
+
+	.macro	___invalidate_dcache_all ar at
+
+	__loop_cache_all \ar \at dii __stringify(DCACHE_WAY_SIZE) \
+			 XCHAL_DCACHE_LINEWIDTH
+
+	.endm
+
+
+	.macro	___invalidate_icache_all ar at
+
+	__loop_cache_all \ar \at iii __stringify(ICACHE_WAY_SIZE) \
+			 XCHAL_ICACHE_LINEWIDTH
+
+	.endm
+
+
+
+	.macro	___flush_invalidate_dcache_range ar as at
+
+	__loop_cache_range \ar \as \at dhwbi XCHAL_DCACHE_LINEWIDTH
+
+	.endm
+
+
+	.macro	___flush_dcache_range ar as at
+
+	__loop_cache_range \ar \as \at dhwb XCHAL_DCACHE_LINEWIDTH
+
+	.endm
+
+
+	.macro	___invalidate_dcache_range ar as at
+
+	__loop_cache_range \ar \as \at dhi XCHAL_DCACHE_LINEWIDTH
+
+	.endm
+
+
+	.macro	___invalidate_icache_range ar as at
+
+	__loop_cache_range \ar \as \at ihi XCHAL_ICACHE_LINEWIDTH
+
+	.endm
+
+
+
+	.macro	___flush_invalidate_dcache_page ar as
+
+	__loop_cache_page \ar \as dhwbi XCHAL_DCACHE_LINEWIDTH
+
+	.endm
+
+
+	.macro ___flush_dcache_page ar as
+
+	__loop_cache_page \ar \as dhwb XCHAL_DCACHE_LINEWIDTH
+
+	.endm
+
+
+	.macro	___invalidate_dcache_page ar as
+
+	__loop_cache_page \ar \as dhi XCHAL_DCACHE_LINEWIDTH
+
+	.endm
+
+
+	.macro	___invalidate_icache_page ar as
+
+	__loop_cache_page \ar \as ihi XCHAL_ICACHE_LINEWIDTH
+
+	.endm
+
diff --git a/arch/xtensa/include/asm/cacheflush.h b/arch/xtensa/include/asm/cacheflush.h
new file mode 100644
index 00000000..376cd9d5
--- /dev/null
+++ b/arch/xtensa/include/asm/cacheflush.h
@@ -0,0 +1,256 @@
+/*
+ * include/asm-xtensa/cacheflush.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * (C) 2001 - 2007 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_CACHEFLUSH_H
+#define _XTENSA_CACHEFLUSH_H
+
+#ifdef __KERNEL__
+
+#include <linux/mm.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+
+/*
+ * Lo-level routines for cache flushing.
+ *
+ * invalidate data or instruction cache:
+ *
+ * __invalidate_icache_all()
+ * __invalidate_icache_page(adr)
+ * __invalidate_dcache_page(adr)
+ * __invalidate_icache_range(from,size)
+ * __invalidate_dcache_range(from,size)
+ *
+ * flush data cache:
+ *
+ * __flush_dcache_page(adr)
+ *
+ * flush and invalidate data cache:
+ *
+ * __flush_invalidate_dcache_all()
+ * __flush_invalidate_dcache_page(adr)
+ * __flush_invalidate_dcache_range(from,size)
+ *
+ * specials for cache aliasing:
+ *
+ * __flush_invalidate_dcache_page_alias(vaddr,paddr)
+ * __invalidate_icache_page_alias(vaddr,paddr)
+ */
+
+extern void __invalidate_dcache_all(void);
+extern void __invalidate_icache_all(void);
+extern void __invalidate_dcache_page(unsigned long);
+extern void __invalidate_icache_page(unsigned long);
+extern void __invalidate_icache_range(unsigned long, unsigned long);
+extern void __invalidate_dcache_range(unsigned long, unsigned long);
+
+
+#if XCHAL_DCACHE_IS_WRITEBACK
+extern void __flush_invalidate_dcache_all(void);
+extern void __flush_dcache_page(unsigned long);
+extern void __flush_dcache_range(unsigned long, unsigned long);
+extern void __flush_invalidate_dcache_page(unsigned long);
+extern void __flush_invalidate_dcache_range(unsigned long, unsigned long);
+#else
+# define __flush_dcache_range(p,s)		do { } while(0)
+# define __flush_dcache_page(p)			do { } while(0)
+# define __flush_invalidate_dcache_page(p) 	__invalidate_dcache_page(p)
+# define __flush_invalidate_dcache_range(p,s)	__invalidate_dcache_range(p,s)
+#endif
+
+#if defined(CONFIG_MMU) && (DCACHE_WAY_SIZE > PAGE_SIZE)
+extern void __flush_invalidate_dcache_page_alias(unsigned long, unsigned long);
+#else
+static inline void __flush_invalidate_dcache_page_alias(unsigned long virt,
+							unsigned long phys) { }
+#endif
+#if defined(CONFIG_MMU) && (ICACHE_WAY_SIZE > PAGE_SIZE)
+extern void __invalidate_icache_page_alias(unsigned long, unsigned long);
+#else
+static inline void __invalidate_icache_page_alias(unsigned long virt,
+						unsigned long phys) { }
+#endif
+
+/*
+ * We have physically tagged caches - nothing to do here -
+ * unless we have cache aliasing.
+ *
+ * Pages can get remapped. Because this might change the 'color' of that page,
+ * we have to flush the cache before the PTE is changed.
+ * (see also Documentation/cachetlb.txt)
+ */
+
+#if (DCACHE_WAY_SIZE > PAGE_SIZE)
+
+#define flush_cache_all()						\
+	do {								\
+		__flush_invalidate_dcache_all();			\
+		__invalidate_icache_all();				\
+	} while (0)
+
+#define flush_cache_mm(mm)		flush_cache_all()
+#define flush_cache_dup_mm(mm)		flush_cache_mm(mm)
+
+#define flush_cache_vmap(start,end)	flush_cache_all()
+#define flush_cache_vunmap(start,end)	flush_cache_all()
+
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
+extern void flush_dcache_page(struct page*);
+extern void flush_cache_range(struct vm_area_struct*, ulong, ulong);
+extern void flush_cache_page(struct vm_area_struct*, unsigned long, unsigned long);
+
+#else
+
+#define flush_cache_all()				do { } while (0)
+#define flush_cache_mm(mm)				do { } while (0)
+#define flush_cache_dup_mm(mm)				do { } while (0)
+
+#define flush_cache_vmap(start,end)			do { } while (0)
+#define flush_cache_vunmap(start,end)			do { } while (0)
+
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
+#define flush_dcache_page(page)				do { } while (0)
+
+#define flush_cache_page(vma,addr,pfn)			do { } while (0)
+#define flush_cache_range(vma,start,end)		do { } while (0)
+
+#endif
+
+/* Ensure consistency between data and instruction cache. */
+#define flush_icache_range(start,end) 					\
+	do {								\
+		__flush_dcache_range(start, (end) - (start));		\
+		__invalidate_icache_range(start,(end) - (start));	\
+	} while (0)
+
+/* This is not required, see Documentation/cachetlb.txt */
+#define	flush_icache_page(vma,page)			do { } while (0)
+
+#define flush_dcache_mmap_lock(mapping)			do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)		do { } while (0)
+
+#if (DCACHE_WAY_SIZE > PAGE_SIZE)
+
+extern void copy_to_user_page(struct vm_area_struct*, struct page*,
+		unsigned long, void*, const void*, unsigned long);
+extern void copy_from_user_page(struct vm_area_struct*, struct page*,
+		unsigned long, void*, const void*, unsigned long);
+
+#else
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len)		\
+	do {								\
+		memcpy(dst, src, len);					\
+		__flush_dcache_range((unsigned long) dst, len);		\
+		__invalidate_icache_range((unsigned long) dst, len);	\
+	} while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+#endif
+
+#define XTENSA_CACHEBLK_LOG2	29
+#define XTENSA_CACHEBLK_SIZE	(1 << XTENSA_CACHEBLK_LOG2)
+#define XTENSA_CACHEBLK_MASK	(7 << XTENSA_CACHEBLK_LOG2)
+
+#if XCHAL_HAVE_CACHEATTR
+static inline u32 xtensa_get_cacheattr(void)
+{
+	u32 r;
+	asm volatile("	rsr %0, CACHEATTR" : "=a"(r));
+	return r;
+}
+
+static inline u32 xtensa_get_dtlb1(u32 addr)
+{
+	u32 r = addr & XTENSA_CACHEBLK_MASK;
+	return r | ((xtensa_get_cacheattr() >> (r >> (XTENSA_CACHEBLK_LOG2-2)))
+			& 0xF);
+}
+#else
+static inline u32 xtensa_get_dtlb1(u32 addr)
+{
+	u32 r;
+	asm volatile("	rdtlb1 %0, %1" : "=a"(r) : "a"(addr));
+	asm volatile("	dsync");
+	return r;
+}
+
+static inline u32 xtensa_get_cacheattr(void)
+{
+	u32 r = 0;
+	u32 a = 0;
+	do {
+		a -= XTENSA_CACHEBLK_SIZE;
+		r = (r << 4) | (xtensa_get_dtlb1(a) & 0xF);
+	} while (a);
+	return r;
+}
+#endif
+
+static inline int xtensa_need_flush_dma_source(u32 addr)
+{
+	return (xtensa_get_dtlb1(addr) & ((1 << XCHAL_CA_BITS) - 1)) >= 4;
+}
+
+static inline int xtensa_need_invalidate_dma_destination(u32 addr)
+{
+	return (xtensa_get_dtlb1(addr) & ((1 << XCHAL_CA_BITS) - 1)) != 2;
+}
+
+static inline void flush_dcache_unaligned(u32 addr, u32 size)
+{
+	u32 cnt;
+	if (size) {
+		cnt = (size + ((XCHAL_DCACHE_LINESIZE - 1) & addr)
+			+ XCHAL_DCACHE_LINESIZE - 1) / XCHAL_DCACHE_LINESIZE;
+		while (cnt--) {
+			asm volatile("	dhwb %0, 0" : : "a"(addr));
+			addr += XCHAL_DCACHE_LINESIZE;
+		}
+		asm volatile("	dsync");
+	}
+}
+
+static inline void invalidate_dcache_unaligned(u32 addr, u32 size)
+{
+	int cnt;
+	if (size) {
+		asm volatile("	dhwbi %0, 0 ;" : : "a"(addr));
+		cnt = (size + ((XCHAL_DCACHE_LINESIZE - 1) & addr)
+			- XCHAL_DCACHE_LINESIZE - 1) / XCHAL_DCACHE_LINESIZE;
+		while (cnt-- > 0) {
+			asm volatile("	dhi %0, %1" : : "a"(addr),
+						"n"(XCHAL_DCACHE_LINESIZE));
+			addr += XCHAL_DCACHE_LINESIZE;
+		}
+		asm volatile("	dhwbi %0, %1" : : "a"(addr),
+						"n"(XCHAL_DCACHE_LINESIZE));
+		asm volatile("	dsync");
+	}
+}
+
+static inline void flush_invalidate_dcache_unaligned(u32 addr, u32 size)
+{
+	u32 cnt;
+	if (size) {
+		cnt = (size + ((XCHAL_DCACHE_LINESIZE - 1) & addr)
+			+ XCHAL_DCACHE_LINESIZE - 1) / XCHAL_DCACHE_LINESIZE;
+		while (cnt--) {
+			asm volatile("	dhwbi %0, 0" : : "a"(addr));
+			addr += XCHAL_DCACHE_LINESIZE;
+		}
+		asm volatile("	dsync");
+	}
+}
+
+#endif /* __KERNEL__ */
+#endif /* _XTENSA_CACHEFLUSH_H */
diff --git a/arch/xtensa/include/asm/checksum.h b/arch/xtensa/include/asm/checksum.h
new file mode 100644
index 00000000..e4d831a3
--- /dev/null
+++ b/arch/xtensa/include/asm/checksum.h
@@ -0,0 +1,252 @@
+/*
+ * include/asm-xtensa/checksum.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_CHECKSUM_H
+#define _XTENSA_CHECKSUM_H
+
+#include <linux/in6.h>
+#include <variant/core.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums, and handles user-space pointer exceptions correctly, when needed.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst, int len, __wsum sum,
+						   int *src_err_ptr, int *dst_err_ptr);
+
+/*
+ *	Note: when you get a NULL pointer exception here this means someone
+ *	passed in an incorrect kernel address to one of these functions.
+ *
+ *	If you use these functions directly please don't forget the access_ok().
+ */
+static inline
+__wsum csum_partial_copy_nocheck(const void *src, void *dst,
+					int len, __wsum sum)
+{
+	return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL);
+}
+
+static inline
+__wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+						int len, __wsum sum, int *err_ptr)
+{
+	return csum_partial_copy_generic((__force const void *)src, dst,
+					len, sum, err_ptr, NULL);
+}
+
+/*
+ *	Fold a partial checksum
+ */
+
+static __inline__ __sum16 csum_fold(__wsum sum)
+{
+	unsigned int __dummy;
+	__asm__("extui	%1, %0, 16, 16\n\t"
+		"extui	%0 ,%0, 0, 16\n\t"
+		"add	%0, %0, %1\n\t"
+		"slli	%1, %0, 16\n\t"
+		"add	%0, %0, %1\n\t"
+		"extui	%0, %0, 16, 16\n\t"
+		"neg	%0, %0\n\t"
+		"addi	%0, %0, -1\n\t"
+		"extui	%0, %0, 0, 16\n\t"
+		: "=r" (sum), "=&r" (__dummy)
+		: "0" (sum));
+	return (__force __sum16)sum;
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ */
+static __inline__ __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	unsigned int sum, tmp, endaddr;
+
+	__asm__ __volatile__(
+		"sub		%0, %0, %0\n\t"
+#if XCHAL_HAVE_LOOPS
+		"loopgtz	%2, 2f\n\t"
+#else
+		"beqz		%2, 2f\n\t"
+		"slli		%4, %2, 2\n\t"
+		"add		%4, %4, %1\n\t"
+		"0:\t"
+#endif
+		"l32i		%3, %1, 0\n\t"
+		"add		%0, %0, %3\n\t"
+		"bgeu		%0, %3, 1f\n\t"
+		"addi		%0, %0, 1\n\t"
+		"1:\t"
+		"addi		%1, %1, 4\n\t"
+#if !XCHAL_HAVE_LOOPS
+		"blt		%1, %4, 0b\n\t"
+#endif
+		"2:\t"
+	/* Since the input registers which are loaded with iph and ihl
+	   are modified, we must also specify them as outputs, or gcc
+	   will assume they contain their original values. */
+		: "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (tmp), "=&r" (endaddr)
+		: "1" (iph), "2" (ihl)
+		: "memory");
+
+	return	csum_fold(sum);
+}
+
+static __inline__ __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+						   unsigned short len,
+						   unsigned short proto,
+						   __wsum sum)
+{
+
+#ifdef __XTENSA_EL__
+	unsigned long len_proto = (len + proto) << 8;
+#elif defined(__XTENSA_EB__)
+	unsigned long len_proto = len + proto;
+#else
+# error processor byte order undefined!
+#endif
+	__asm__("add	%0, %0, %1\n\t"
+		"bgeu	%0, %1, 1f\n\t"
+		"addi	%0, %0, 1\n\t"
+		"1:\t"
+		"add	%0, %0, %2\n\t"
+		"bgeu	%0, %2, 1f\n\t"
+		"addi	%0, %0, 1\n\t"
+		"1:\t"
+		"add	%0, %0, %3\n\t"
+		"bgeu	%0, %3, 1f\n\t"
+		"addi	%0, %0, 1\n\t"
+		"1:\t"
+		: "=r" (sum), "=r" (len_proto)
+		: "r" (daddr), "r" (saddr), "1" (len_proto), "0" (sum));
+	return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static __inline__ __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+						       unsigned short len,
+						       unsigned short proto,
+						       __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+static __inline__ __sum16 ip_compute_csum(const void *buff, int len)
+{
+    return csum_fold (csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+					  const struct in6_addr *daddr,
+					  __u32 len, unsigned short proto,
+					  __wsum sum)
+{
+	unsigned int __dummy;
+	__asm__("l32i	%1, %2, 0\n\t"
+		"add	%0, %0, %1\n\t"
+		"bgeu	%0, %1, 1f\n\t"
+		"addi	%0, %0, 1\n\t"
+		"1:\t"
+		"l32i	%1, %2, 4\n\t"
+		"add	%0, %0, %1\n\t"
+		"bgeu	%0, %1, 1f\n\t"
+		"addi	%0, %0, 1\n\t"
+		"1:\t"
+		"l32i	%1, %2, 8\n\t"
+		"add	%0, %0, %1\n\t"
+		"bgeu	%0, %1, 1f\n\t"
+		"addi	%0, %0, 1\n\t"
+		"1:\t"
+		"l32i	%1, %2, 12\n\t"
+		"add	%0, %0, %1\n\t"
+		"bgeu	%0, %1, 1f\n\t"
+		"addi	%0, %0, 1\n\t"
+		"1:\t"
+		"l32i	%1, %3, 0\n\t"
+		"add	%0, %0, %1\n\t"
+		"bgeu	%0, %1, 1f\n\t"
+		"addi	%0, %0, 1\n\t"
+		"1:\t"
+		"l32i	%1, %3, 4\n\t"
+		"add	%0, %0, %1\n\t"
+		"bgeu	%0, %1, 1f\n\t"
+		"addi	%0, %0, 1\n\t"
+		"1:\t"
+		"l32i	%1, %3, 8\n\t"
+		"add	%0, %0, %1\n\t"
+		"bgeu	%0, %1, 1f\n\t"
+		"addi	%0, %0, 1\n\t"
+		"1:\t"
+		"l32i	%1, %3, 12\n\t"
+		"add	%0, %0, %1\n\t"
+		"bgeu	%0, %1, 1f\n\t"
+		"addi	%0, %0, 1\n\t"
+		"1:\t"
+		"add	%0, %0, %4\n\t"
+		"bgeu	%0, %4, 1f\n\t"
+		"addi	%0, %0, 1\n\t"
+		"1:\t"
+		"add	%0, %0, %5\n\t"
+		"bgeu	%0, %5, 1f\n\t"
+		"addi	%0, %0, 1\n\t"
+		"1:\t"
+		: "=r" (sum), "=&r" (__dummy)
+		: "r" (saddr), "r" (daddr),
+		  "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)
+		: "memory");
+
+	return csum_fold(sum);
+}
+
+/*
+ *	Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+static __inline__ __wsum csum_and_copy_to_user(const void *src, void __user *dst,
+				    int len, __wsum sum, int *err_ptr)
+{
+	if (access_ok(VERIFY_WRITE, dst, len))
+		return csum_partial_copy_generic(src, dst, len, sum, NULL, err_ptr);
+
+	if (len)
+		*err_ptr = -EFAULT;
+
+	return (__force __wsum)-1; /* invalid checksum */
+}
+#endif
diff --git a/arch/xtensa/include/asm/coprocessor.h b/arch/xtensa/include/asm/coprocessor.h
new file mode 100644
index 00000000..75c94a16
--- /dev/null
+++ b/arch/xtensa/include/asm/coprocessor.h
@@ -0,0 +1,178 @@
+/*
+ * include/asm-xtensa/coprocessor.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 - 2007 Tensilica Inc.
+ */
+
+
+#ifndef _XTENSA_COPROCESSOR_H
+#define _XTENSA_COPROCESSOR_H
+
+#include <linux/stringify.h>
+#include <variant/core.h>
+#include <variant/tie.h>
+#include <asm/types.h>
+
+#ifdef __ASSEMBLY__
+# include <variant/tie-asm.h>
+
+.macro	xchal_sa_start  a b
+	.set .Lxchal_pofs_, 0
+	.set .Lxchal_ofs_, 0
+.endm
+
+.macro	xchal_sa_align  ptr minofs maxofs ofsalign totalign
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + .Lxchal_pofs_ + \totalign - 1
+	.set	.Lxchal_ofs_, (.Lxchal_ofs_ & -\totalign) - .Lxchal_pofs_
+.endm
+
+#define _SELECT	(  XTHAL_SAS_TIE | XTHAL_SAS_OPT \
+		 | XTHAL_SAS_CC \
+		 | XTHAL_SAS_CALR | XTHAL_SAS_CALE )
+
+.macro save_xtregs_opt ptr clb at1 at2 at3 at4 offset
+	.if XTREGS_OPT_SIZE > 0
+		addi	\clb, \ptr, \offset
+		xchal_ncp_store \clb \at1 \at2 \at3 \at4 select=_SELECT
+	.endif
+.endm
+
+.macro load_xtregs_opt ptr clb at1 at2 at3 at4 offset
+	.if XTREGS_OPT_SIZE > 0
+		addi	\clb, \ptr, \offset
+		xchal_ncp_load \clb \at1 \at2 \at3 \at4 select=_SELECT
+	.endif
+.endm
+#undef _SELECT
+
+#define _SELECT	(  XTHAL_SAS_TIE | XTHAL_SAS_OPT \
+		 | XTHAL_SAS_NOCC \
+		 | XTHAL_SAS_CALR | XTHAL_SAS_CALE | XTHAL_SAS_GLOB )
+
+.macro save_xtregs_user ptr clb at1 at2 at3 at4 offset
+	.if XTREGS_USER_SIZE > 0
+		addi	\clb, \ptr, \offset
+		xchal_ncp_store \clb \at1 \at2 \at3 \at4 select=_SELECT
+	.endif
+.endm
+
+.macro load_xtregs_user ptr clb at1 at2 at3 at4 offset
+	.if XTREGS_USER_SIZE > 0
+		addi	\clb, \ptr, \offset
+		xchal_ncp_load \clb \at1 \at2 \at3 \at4 select=_SELECT
+	.endif
+.endm
+#undef _SELECT
+
+
+
+#endif	/* __ASSEMBLY__ */
+
+/*
+ * XTENSA_HAVE_COPROCESSOR(x) returns 1 if coprocessor x is configured.
+ *
+ * XTENSA_HAVE_IO_PORT(x) returns 1 if io-port x is configured.
+ *
+ */
+
+#define XTENSA_HAVE_COPROCESSOR(x)					\
+	((XCHAL_CP_MASK ^ XCHAL_CP_PORT_MASK) & (1 << (x)))
+#define XTENSA_HAVE_COPROCESSORS					\
+	(XCHAL_CP_MASK ^ XCHAL_CP_PORT_MASK)
+#define XTENSA_HAVE_IO_PORT(x)						\
+	(XCHAL_CP_PORT_MASK & (1 << (x)))
+#define XTENSA_HAVE_IO_PORTS						\
+	XCHAL_CP_PORT_MASK
+
+#ifndef __ASSEMBLY__
+
+
+#if XCHAL_HAVE_CP
+
+#define RSR_CPENABLE(x)	do {						  \
+	__asm__ __volatile__("rsr %0," __stringify(CPENABLE) : "=a" (x)); \
+	} while(0);
+#define WSR_CPENABLE(x)	do {						  \
+  	__asm__ __volatile__("wsr %0," __stringify(CPENABLE) "; rsync" 	  \
+	    		     :: "a" (x));				  \
+	} while(0);
+
+#endif /* XCHAL_HAVE_CP */
+
+
+/*
+ * Additional registers.
+ * We define three types of additional registers:
+ *  ext: extra registers that are used by the compiler
+ *  cpn: optional registers that can be used by a user application
+ *  cpX: coprocessor registers that can only be used if the corresponding
+ *       CPENABLE bit is set.
+ */
+
+#define XCHAL_SA_REG(list,cc,abi,type,y,name,z,align,size,...)	\
+	__REG ## list (cc, abi, type, name, size, align)
+
+#define __REG0(cc,abi,t,name,s,a)	__REG0_ ## cc (abi,name)
+#define __REG1(cc,abi,t,name,s,a)	__REG1_ ## cc (name)
+#define __REG2(cc,abi,type,...)		__REG2_ ## type (__VA_ARGS__)
+
+#define __REG0_0(abi,name)
+#define __REG0_1(abi,name)		__REG0_1 ## abi (name)
+#define __REG0_10(name)	__u32 name;
+#define __REG0_11(name)	__u32 name;
+#define __REG0_12(name)
+
+#define __REG1_0(name)	__u32 name;
+#define __REG1_1(name)
+
+#define __REG2_0(n,s,a)	__u32 name;
+#define __REG2_1(n,s,a)	unsigned char n[s] __attribute__ ((aligned(a)));
+#define __REG2_2(n,s,a) unsigned char n[s] __attribute__ ((aligned(a)));
+
+typedef struct { XCHAL_NCP_SA_LIST(0) } xtregs_opt_t
+	__attribute__ ((aligned (XCHAL_NCP_SA_ALIGN)));
+typedef struct { XCHAL_NCP_SA_LIST(1) } xtregs_user_t
+	__attribute__ ((aligned (XCHAL_NCP_SA_ALIGN)));
+
+#if XTENSA_HAVE_COPROCESSORS
+
+typedef struct { XCHAL_CP0_SA_LIST(2) } xtregs_cp0_t
+	__attribute__ ((aligned (XCHAL_CP0_SA_ALIGN)));
+typedef struct { XCHAL_CP1_SA_LIST(2) } xtregs_cp1_t
+	__attribute__ ((aligned (XCHAL_CP1_SA_ALIGN)));
+typedef struct { XCHAL_CP2_SA_LIST(2) } xtregs_cp2_t
+	__attribute__ ((aligned (XCHAL_CP2_SA_ALIGN)));
+typedef struct { XCHAL_CP3_SA_LIST(2) } xtregs_cp3_t
+	__attribute__ ((aligned (XCHAL_CP3_SA_ALIGN)));
+typedef struct { XCHAL_CP4_SA_LIST(2) } xtregs_cp4_t
+	__attribute__ ((aligned (XCHAL_CP4_SA_ALIGN)));
+typedef struct { XCHAL_CP5_SA_LIST(2) } xtregs_cp5_t
+	__attribute__ ((aligned (XCHAL_CP5_SA_ALIGN)));
+typedef struct { XCHAL_CP6_SA_LIST(2) } xtregs_cp6_t
+	__attribute__ ((aligned (XCHAL_CP6_SA_ALIGN)));
+typedef struct { XCHAL_CP7_SA_LIST(2) } xtregs_cp7_t
+	__attribute__ ((aligned (XCHAL_CP7_SA_ALIGN)));
+
+extern struct thread_info* coprocessor_owner[XCHAL_CP_MAX];
+extern void coprocessor_save(void*, int);
+extern void coprocessor_load(void*, int);
+extern void coprocessor_flush(struct thread_info*, int);
+extern void coprocessor_restore(struct thread_info*, int);
+
+extern void coprocessor_release_all(struct thread_info*);
+extern void coprocessor_flush_all(struct thread_info*);
+
+static inline void coprocessor_clear_cpenable(void)
+{
+	unsigned long i = 0;
+	WSR_CPENABLE(i);
+}
+
+#endif	/* XTENSA_HAVE_COPROCESSORS */
+
+#endif	/* !__ASSEMBLY__ */
+#endif	/* _XTENSA_COPROCESSOR_H */
diff --git a/arch/xtensa/include/asm/cpumask.h b/arch/xtensa/include/asm/cpumask.h
new file mode 100644
index 00000000..ebeede39
--- /dev/null
+++ b/arch/xtensa/include/asm/cpumask.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-xtensa/cpumask.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_CPUMASK_H
+#define _XTENSA_CPUMASK_H
+
+#include <asm-generic/cpumask.h>
+
+#endif /* _XTENSA_CPUMASK_H */
diff --git a/arch/xtensa/include/asm/cputime.h b/arch/xtensa/include/asm/cputime.h
new file mode 100644
index 00000000..a7fb864a
--- /dev/null
+++ b/arch/xtensa/include/asm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef _XTENSA_CPUTIME_H
+#define _XTENSA_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* _XTENSA_CPUTIME_H */
diff --git a/arch/xtensa/include/asm/current.h b/arch/xtensa/include/asm/current.h
new file mode 100644
index 00000000..8d1eb5d7
--- /dev/null
+++ b/arch/xtensa/include/asm/current.h
@@ -0,0 +1,38 @@
+/*
+ * include/asm-xtensa/current.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_CURRENT_H
+#define _XTENSA_CURRENT_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static inline struct task_struct *get_current(void)
+{
+	return current_thread_info()->task;
+}
+
+#define current get_current()
+
+#else
+
+#define CURRENT_SHIFT 13
+
+#define GET_CURRENT(reg,sp)		\
+	GET_THREAD_INFO(reg,sp);	\
+  	l32i reg, reg, TI_TASK		\
+
+#endif
+
+
+#endif /* XTENSA_CURRENT_H */
diff --git a/arch/xtensa/include/asm/delay.h b/arch/xtensa/include/asm/delay.h
new file mode 100644
index 00000000..e1d8c9e0
--- /dev/null
+++ b/arch/xtensa/include/asm/delay.h
@@ -0,0 +1,49 @@
+/*
+ * include/asm-xtensa/delay.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ *
+ */
+
+#ifndef _XTENSA_DELAY_H
+#define _XTENSA_DELAY_H
+
+#include <asm/processor.h>
+#include <asm/param.h>
+
+extern unsigned long loops_per_jiffy;
+
+static inline void __delay(unsigned long loops)
+{
+  /* 2 cycles per loop. */
+  __asm__ __volatile__ ("1: addi %0, %0, -2; bgeui %0, 2, 1b"
+			: "=r" (loops) : "0" (loops));
+}
+
+static __inline__ u32 xtensa_get_ccount(void)
+{
+	u32 ccount;
+	asm volatile ("rsr %0, 234; # CCOUNT\n" : "=r" (ccount));
+	return ccount;
+}
+
+/* For SMP/NUMA systems, change boot_cpu_data to something like
+ * local_cpu_data->... where local_cpu_data points to the current
+ * cpu. */
+
+static __inline__ void udelay (unsigned long usecs)
+{
+	unsigned long start = xtensa_get_ccount();
+	unsigned long cycles = usecs * (loops_per_jiffy / (1000000UL / HZ));
+
+	/* Note: all variables are unsigned (can wrap around)! */
+	while (((unsigned long)xtensa_get_ccount()) - start < cycles)
+		;
+}
+
+#endif
+
diff --git a/arch/xtensa/include/asm/device.h b/arch/xtensa/include/asm/device.h
new file mode 100644
index 00000000..d8f9872b
--- /dev/null
+++ b/arch/xtensa/include/asm/device.h
@@ -0,0 +1,7 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
diff --git a/arch/xtensa/include/asm/div64.h b/arch/xtensa/include/asm/div64.h
new file mode 100644
index 00000000..f35678cb
--- /dev/null
+++ b/arch/xtensa/include/asm/div64.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-xtensa/div64.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2007 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_DIV64_H
+#define _XTENSA_DIV64_H
+
+#include <asm-generic/div64.h>
+
+#endif /* _XTENSA_DIV64_H */
diff --git a/arch/xtensa/include/asm/dma-mapping.h b/arch/xtensa/include/asm/dma-mapping.h
new file mode 100644
index 00000000..492c9579
--- /dev/null
+++ b/arch/xtensa/include/asm/dma-mapping.h
@@ -0,0 +1,171 @@
+/*
+ * include/asm-xtensa/dma-mapping.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_DMA_MAPPING_H
+#define _XTENSA_DMA_MAPPING_H
+
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <linux/mm.h>
+#include <linux/scatterlist.h>
+
+/*
+ * DMA-consistent mapping functions.
+ */
+
+extern void *consistent_alloc(int, size_t, dma_addr_t, unsigned long);
+extern void consistent_free(void*, size_t, dma_addr_t);
+extern void consistent_sync(void*, size_t, int);
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+			   dma_addr_t *dma_handle, gfp_t flag);
+
+void dma_free_coherent(struct device *dev, size_t size,
+			 void *vaddr, dma_addr_t dma_handle);
+
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *ptr, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	consistent_sync(ptr, size, direction);
+	return virt_to_phys(ptr);
+}
+
+static inline void
+dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+		 enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+}
+
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	   enum dma_data_direction direction)
+{
+	int i;
+
+	BUG_ON(direction == DMA_NONE);
+
+	for (i = 0; i < nents; i++, sg++ ) {
+		BUG_ON(!sg_page(sg));
+
+		sg->dma_address = sg_phys(sg);
+		consistent_sync(sg_virt(sg), sg->length, direction);
+	}
+
+	return nents;
+}
+
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page, unsigned long offset,
+	     size_t size, enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	return (dma_addr_t)(page_to_pfn(page)) * PAGE_SIZE + offset;
+}
+
+static inline void
+dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+}
+
+
+static inline void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+	     enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+}
+
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction)
+{
+	consistent_sync((void *)bus_to_virt(dma_handle), size, direction);
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction)
+{
+	consistent_sync((void *)bus_to_virt(dma_handle), size, direction);
+}
+
+static inline void
+dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+		      unsigned long offset, size_t size,
+		      enum dma_data_direction direction)
+{
+
+	consistent_sync((void *)bus_to_virt(dma_handle)+offset,size,direction);
+}
+
+static inline void
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+		      unsigned long offset, size_t size,
+		      enum dma_data_direction direction)
+{
+
+	consistent_sync((void *)bus_to_virt(dma_handle)+offset,size,direction);
+}
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
+		 enum dma_data_direction dir)
+{
+	int i;
+	for (i = 0; i < nelems; i++, sg++)
+		consistent_sync(sg_virt(sg), sg->length, dir);
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
+		 enum dma_data_direction dir)
+{
+	int i;
+	for (i = 0; i < nelems; i++, sg++)
+		consistent_sync(sg_virt(sg), sg->length, dir);
+}
+static inline int
+dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return 0;
+}
+
+static inline int
+dma_supported(struct device *dev, u64 mask)
+{
+	return 1;
+}
+
+static inline int
+dma_set_mask(struct device *dev, u64 mask)
+{
+	if(!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+
+	*dev->dma_mask = mask;
+
+	return 0;
+}
+
+static inline void
+dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+	       enum dma_data_direction direction)
+{
+	consistent_sync(vaddr, size, direction);
+}
+
+#endif	/* _XTENSA_DMA_MAPPING_H */
diff --git a/arch/xtensa/include/asm/dma.h b/arch/xtensa/include/asm/dma.h
new file mode 100644
index 00000000..bb099a37
--- /dev/null
+++ b/arch/xtensa/include/asm/dma.h
@@ -0,0 +1,62 @@
+/*
+ * include/asm-xtensa/dma.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_DMA_H
+#define _XTENSA_DMA_H
+
+#include <asm/io.h>		/* need byte IO */
+
+/*
+ * This is only to be defined if we have PC-like DMA.
+ * By default this is not true on an Xtensa processor,
+ * however on boards with a PCI bus, such functionality
+ * might be emulated externally.
+ *
+ * NOTE:  there still exists driver code that assumes
+ * this is defined, eg. drivers/sound/soundcard.c (as of 2.4).
+ */
+#define MAX_DMA_CHANNELS	8
+
+/*
+ * The maximum virtual address to which DMA transfers
+ * can be performed on this platform.
+ *
+ * NOTE: This is board (platform) specific, not processor-specific!
+ *
+ * NOTE: This assumes DMA transfers can only be performed on
+ *	the section of physical memory contiguously mapped in virtual
+ *	space for the kernel.  For the Xtensa architecture, this
+ *	means the maximum possible size of this DMA area is
+ *	the size of the statically mapped kernel segment
+ *	(XCHAL_KSEG_{CACHED,BYPASS}_SIZE), ie. 128 MB.
+ *
+ * NOTE: When the entire KSEG area is DMA capable, we subtract
+ *	one from the max address so that the virt_to_phys() macro
+ *	works correctly on the address (otherwise the address
+ *	enters another area, and virt_to_phys() may not return
+ *	the value desired).
+ */
+
+#ifndef MAX_DMA_ADDRESS
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET + XCHAL_KIO_SIZE - 1)
+#endif
+
+/* Reserve and release a DMA channel */
+extern int request_dma(unsigned int dmanr, const char * device_id);
+extern void free_dma(unsigned int dmanr);
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy 	(0)
+#endif
+
+
+#endif
diff --git a/arch/xtensa/include/asm/elf.h b/arch/xtensa/include/asm/elf.h
new file mode 100644
index 00000000..6e65eada
--- /dev/null
+++ b/arch/xtensa/include/asm/elf.h
@@ -0,0 +1,205 @@
+/*
+ * include/asm-xtensa/elf.h
+ *
+ * ELF register definitions
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_ELF_H
+#define _XTENSA_ELF_H
+
+#include <asm/ptrace.h>
+#include <asm/coprocessor.h>
+
+/* Xtensa processor ELF architecture-magic number */
+
+#define EM_XTENSA	94
+#define EM_XTENSA_OLD	0xABC7
+
+/* Xtensa relocations defined by the ABIs */
+
+#define R_XTENSA_NONE           0
+#define R_XTENSA_32             1
+#define R_XTENSA_RTLD           2
+#define R_XTENSA_GLOB_DAT       3
+#define R_XTENSA_JMP_SLOT       4
+#define R_XTENSA_RELATIVE       5
+#define R_XTENSA_PLT            6
+#define R_XTENSA_OP0            8
+#define R_XTENSA_OP1            9
+#define R_XTENSA_OP2            10
+#define R_XTENSA_ASM_EXPAND	11
+#define R_XTENSA_ASM_SIMPLIFY	12
+#define R_XTENSA_GNU_VTINHERIT	15
+#define R_XTENSA_GNU_VTENTRY	16
+#define R_XTENSA_DIFF8		17
+#define R_XTENSA_DIFF16		18
+#define R_XTENSA_DIFF32		19
+#define R_XTENSA_SLOT0_OP	20
+#define R_XTENSA_SLOT1_OP	21
+#define R_XTENSA_SLOT2_OP	22
+#define R_XTENSA_SLOT3_OP	23
+#define R_XTENSA_SLOT4_OP	24
+#define R_XTENSA_SLOT5_OP	25
+#define R_XTENSA_SLOT6_OP	26
+#define R_XTENSA_SLOT7_OP	27
+#define R_XTENSA_SLOT8_OP	28
+#define R_XTENSA_SLOT9_OP	29
+#define R_XTENSA_SLOT10_OP	30
+#define R_XTENSA_SLOT11_OP	31
+#define R_XTENSA_SLOT12_OP	32
+#define R_XTENSA_SLOT13_OP	33
+#define R_XTENSA_SLOT14_OP	34
+#define R_XTENSA_SLOT0_ALT	35
+#define R_XTENSA_SLOT1_ALT	36
+#define R_XTENSA_SLOT2_ALT	37
+#define R_XTENSA_SLOT3_ALT	38
+#define R_XTENSA_SLOT4_ALT	39
+#define R_XTENSA_SLOT5_ALT	40
+#define R_XTENSA_SLOT6_ALT	41
+#define R_XTENSA_SLOT7_ALT	42
+#define R_XTENSA_SLOT8_ALT	43
+#define R_XTENSA_SLOT9_ALT	44
+#define R_XTENSA_SLOT10_ALT	45
+#define R_XTENSA_SLOT11_ALT	46
+#define R_XTENSA_SLOT12_ALT	47
+#define R_XTENSA_SLOT13_ALT	48
+#define R_XTENSA_SLOT14_ALT	49
+
+/* ELF register definitions. This is needed for core dump support.  */
+
+typedef unsigned long elf_greg_t;
+
+typedef struct {
+	elf_greg_t pc;
+	elf_greg_t ps;
+	elf_greg_t lbeg;
+	elf_greg_t lend;
+	elf_greg_t lcount;
+	elf_greg_t sar;
+	elf_greg_t windowstart;
+	elf_greg_t windowbase;
+	elf_greg_t reserved[8+48];
+	elf_greg_t a[64];
+} xtensa_gregset_t;
+
+#define ELF_NGREG	(sizeof(xtensa_gregset_t) / sizeof(elf_greg_t))
+
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+#define ELF_NFPREG	18
+
+typedef unsigned int elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+#define ELF_CORE_COPY_REGS(_eregs, _pregs) 				\
+	xtensa_elf_core_copy_regs ((xtensa_gregset_t*)&(_eregs), _pregs);
+
+extern void xtensa_elf_core_copy_regs (xtensa_gregset_t *, struct pt_regs *);
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+
+#define elf_check_arch(x) ( ( (x)->e_machine == EM_XTENSA )  || \
+			    ( (x)->e_machine == EM_XTENSA_OLD ) )
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+
+#ifdef __XTENSA_EL__
+# define ELF_DATA	ELFDATA2LSB
+#elif defined(__XTENSA_EB__)
+# define ELF_DATA	ELFDATA2MSB
+#else
+# error processor byte order undefined!
+#endif
+
+#define ELF_CLASS	ELFCLASS32
+#define ELF_ARCH	EM_XTENSA
+
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/*
+ * This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+ * use of this is to invoke "./ld.so someprog" to test out a new version of
+ * the loader.  We need to make sure that it is out of the way of the program
+ * that it will "exec", and that there is sufficient room for the brk.
+ */
+
+#define ELF_ET_DYN_BASE         (2 * TASK_SIZE / 3)
+
+/*
+ * This yields a mask that user programs can use to figure out what
+ * instruction set this CPU supports.  This could be done in user space,
+ * but it's not easy, and we've already done it here.
+ */
+
+#define ELF_HWCAP	(0)
+
+/*
+ * This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization.  This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+ * For the moment, we have only optimizations for the Intel generations,
+ * but that could change...
+ */
+
+#define ELF_PLATFORM  (NULL)
+
+/*
+ * The Xtensa processor ABI says that when the program starts, a2
+ * contains a pointer to a function which might be registered using
+ * `atexit'.  This provides a mean for the dynamic linker to call
+ * DT_FINI functions for shared libraries that have been loaded before
+ * the code runs.
+ *
+ * A value of 0 tells we have no such handler.
+ *
+ * We might as well make sure everything else is cleared too (except
+ * for the stack pointer in a1), just to make things more
+ * deterministic.  Also, clearing a0 terminates debugger backtraces.
+ */
+
+#define ELF_PLAT_INIT(_r, load_addr) \
+  do { _r->areg[0]=0; /*_r->areg[1]=0;*/ _r->areg[2]=0;  _r->areg[3]=0;  \
+       _r->areg[4]=0;  _r->areg[5]=0;    _r->areg[6]=0;  _r->areg[7]=0;  \
+       _r->areg[8]=0;  _r->areg[9]=0;    _r->areg[10]=0; _r->areg[11]=0; \
+       _r->areg[12]=0; _r->areg[13]=0;   _r->areg[14]=0; _r->areg[15]=0; \
+  } while (0)
+
+typedef struct {
+	xtregs_opt_t	opt;
+	xtregs_user_t	user;
+#if XTENSA_HAVE_COPROCESSORS
+	xtregs_cp0_t	cp0;
+	xtregs_cp1_t	cp1;
+	xtregs_cp2_t	cp2;
+	xtregs_cp3_t	cp3;
+	xtregs_cp4_t	cp4;
+	xtregs_cp5_t	cp5;
+	xtregs_cp6_t	cp6;
+	xtregs_cp7_t	cp7;
+#endif
+} elf_xtregs_t;
+
+#define SET_PERSONALITY(ex) set_personality(PER_LINUX_32BIT)
+
+struct task_struct;
+
+extern void do_copy_regs (xtensa_gregset_t*, struct pt_regs*,
+			  struct task_struct*);
+extern void do_restore_regs (xtensa_gregset_t*, struct pt_regs*,
+			     struct task_struct*);
+extern void do_save_fpregs (elf_fpregset_t*, struct pt_regs*,
+			    struct task_struct*);
+extern int do_restore_fpregs (elf_fpregset_t*, struct pt_regs*,
+			      struct task_struct*);
+
+#endif	/* _XTENSA_ELF_H */
diff --git a/arch/xtensa/include/asm/emergency-restart.h b/arch/xtensa/include/asm/emergency-restart.h
new file mode 100644
index 00000000..108d8c48
--- /dev/null
+++ b/arch/xtensa/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/xtensa/include/asm/errno.h b/arch/xtensa/include/asm/errno.h
new file mode 100644
index 00000000..a0f3b96b
--- /dev/null
+++ b/arch/xtensa/include/asm/errno.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-xtensa/errno.h
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of
+ * this archive for more details.
+ *
+ * Copyright (C) 2002 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_ERRNO_H
+#define _XTENSA_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif	/* _XTENSA_ERRNO_H */
diff --git a/arch/xtensa/include/asm/fb.h b/arch/xtensa/include/asm/fb.h
new file mode 100644
index 00000000..c7df3803
--- /dev/null
+++ b/arch/xtensa/include/asm/fb.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+#include <linux/fb.h>
+
+#define fb_pgprotect(...) do {} while (0)
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/xtensa/include/asm/fcntl.h b/arch/xtensa/include/asm/fcntl.h
new file mode 100644
index 00000000..46ab12db
--- /dev/null
+++ b/arch/xtensa/include/asm/fcntl.h
@@ -0,0 +1 @@
+#include <asm-generic/fcntl.h>
diff --git a/arch/xtensa/include/asm/flat.h b/arch/xtensa/include/asm/flat.h
new file mode 100644
index 00000000..94c44abf
--- /dev/null
+++ b/arch/xtensa/include/asm/flat.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_XTENSA_FLAT_H
+#define __ASM_XTENSA_FLAT_H
+
+#define flat_argvp_envp_on_stack()			0
+#define flat_old_ram_flag(flags)			(flags)
+#define flat_reloc_valid(reloc, size)			((reloc) <= (size))
+#define flat_get_addr_from_rp(rp, relval, flags, p)	get_unaligned(rp)
+#define flat_put_addr_at_rp(rp, val, relval	)	put_unaligned(val, rp)
+#define flat_get_relocate_addr(rel)			(rel)
+#define flat_set_persistent(relval, p)			0
+
+#endif /* __ASM_XTENSA_FLAT_H */
diff --git a/arch/xtensa/include/asm/ftrace.h b/arch/xtensa/include/asm/ftrace.h
new file mode 100644
index 00000000..40a8c178
--- /dev/null
+++ b/arch/xtensa/include/asm/ftrace.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/xtensa/include/asm/futex.h b/arch/xtensa/include/asm/futex.h
new file mode 100644
index 00000000..0b745828
--- /dev/null
+++ b/arch/xtensa/include/asm/futex.h
@@ -0,0 +1 @@
+#include <asm-generic/futex.h>
diff --git a/arch/xtensa/include/asm/gpio.h b/arch/xtensa/include/asm/gpio.h
new file mode 100644
index 00000000..a8c9fc46
--- /dev/null
+++ b/arch/xtensa/include/asm/gpio.h
@@ -0,0 +1,56 @@
+/*
+ * Generic GPIO API implementation for xtensa.
+ *
+ * Stolen from x86, which is derived from the generic GPIO API for powerpc:
+ *
+ * Copyright (c) 2007-2008  MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _ASM_XTENSA_GPIO_H
+#define _ASM_XTENSA_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+#ifdef CONFIG_GPIOLIB
+
+/*
+ * Just call gpiolib.
+ */
+static inline int gpio_get_value(unsigned int gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned int gpio)
+{
+	return __gpio_to_irq(gpio);
+}
+
+/*
+ * Not implemented, yet.
+ */
+static inline int irq_to_gpio(unsigned int irq)
+{
+	return -EINVAL;
+}
+
+#endif /* CONFIG_GPIOLIB */
+
+#endif /* _ASM_XTENSA_GPIO_H */
diff --git a/arch/xtensa/include/asm/hardirq.h b/arch/xtensa/include/asm/hardirq.h
new file mode 100644
index 00000000..26664cef
--- /dev/null
+++ b/arch/xtensa/include/asm/hardirq.h
@@ -0,0 +1,19 @@
+/*
+ * include/asm-xtensa/hardirq.h
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of
+ * this archive for more details.
+ *
+ * Copyright (C) 2002 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_HARDIRQ_H
+#define _XTENSA_HARDIRQ_H
+
+void ack_bad_irq(unsigned int irq);
+#define ack_bad_irq ack_bad_irq
+
+#include <asm-generic/hardirq.h>
+
+#endif	/* _XTENSA_HARDIRQ_H */
diff --git a/arch/xtensa/include/asm/highmem.h b/arch/xtensa/include/asm/highmem.h
new file mode 100644
index 00000000..0a046ca5
--- /dev/null
+++ b/arch/xtensa/include/asm/highmem.h
@@ -0,0 +1,17 @@
+/*
+ * include/asm-xtensa/highmem.h
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of
+ * this archive for more details.
+ *
+ * Copyright (C) 2003 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_HIGHMEM_H
+#define _XTENSA_HIGHMEM_H
+
+extern void flush_cache_kmaps(void);
+
+#endif
+
diff --git a/arch/xtensa/include/asm/hw_irq.h b/arch/xtensa/include/asm/hw_irq.h
new file mode 100644
index 00000000..3ddbea75
--- /dev/null
+++ b/arch/xtensa/include/asm/hw_irq.h
@@ -0,0 +1,14 @@
+/*
+ * include/asm-xtensa/hw_irq.h
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of
+ * this archive for more details.
+ *
+ * Copyright (C) 2002 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_HW_IRQ_H
+#define _XTENSA_HW_IRQ_H
+
+#endif
diff --git a/arch/xtensa/include/asm/io.h b/arch/xtensa/include/asm/io.h
new file mode 100644
index 00000000..d04cd3a6
--- /dev/null
+++ b/arch/xtensa/include/asm/io.h
@@ -0,0 +1,207 @@
+/*
+ * include/asm-xtensa/io.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_IO_H
+#define _XTENSA_IO_H
+
+#ifdef __KERNEL__
+#include <asm/byteorder.h>
+#include <asm/page.h>
+#include <linux/kernel.h>
+
+#include <linux/types.h>
+
+#define XCHAL_KIO_CACHED_VADDR	0xe0000000
+#define XCHAL_KIO_BYPASS_VADDR	0xf0000000
+#define XCHAL_KIO_PADDR		0xf0000000
+#define XCHAL_KIO_SIZE		0x10000000
+
+#define IOADDR(x)		(XCHAL_KIO_BYPASS_VADDR + (x))
+
+/*
+ * swap functions to change byte order from little-endian to big-endian and
+ * vice versa.
+ */
+
+static inline unsigned short _swapw (unsigned short v)
+{
+	return (v << 8) | (v >> 8);
+}
+
+static inline unsigned int _swapl (unsigned int v)
+{
+	return (v << 24) | ((v & 0xff00) << 8) | ((v >> 8) & 0xff00) | (v >> 24);
+}
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ * These are trivial on the 1:1 Linux/Xtensa mapping
+ */
+
+static inline unsigned long virt_to_phys(volatile void * address)
+{
+	return __pa(address);
+}
+
+static inline void * phys_to_virt(unsigned long address)
+{
+	return __va(address);
+}
+
+/*
+ * virt_to_bus and bus_to_virt are deprecated.
+ */
+
+#define virt_to_bus(x)	virt_to_phys(x)
+#define bus_to_virt(x)	phys_to_virt(x)
+
+/*
+ * Return the virtual (cached) address for the specified bus memory.
+ * Note that we currently don't support any address outside the KIO segment.
+ */
+
+static inline void *ioremap(unsigned long offset, unsigned long size)
+{
+#ifdef CONFIG_MMU
+	if (offset >= XCHAL_KIO_PADDR
+	    && offset < XCHAL_KIO_PADDR + XCHAL_KIO_SIZE)
+		return (void*)(offset-XCHAL_KIO_PADDR+XCHAL_KIO_BYPASS_VADDR);
+	else
+		BUG();
+#else
+	return (void *)offset;
+#endif
+}
+
+static inline void *ioremap_nocache(unsigned long offset, unsigned long size)
+{
+#ifdef CONFIG_MMU
+	if (offset >= XCHAL_KIO_PADDR
+	    && offset < XCHAL_KIO_PADDR + XCHAL_KIO_SIZE)
+		return (void*)(offset-XCHAL_KIO_PADDR+XCHAL_KIO_CACHED_VADDR);
+	else
+		BUG();
+#else
+	return (void *)offset;
+#endif
+}
+
+static inline void iounmap(void *addr)
+{
+}
+
+/*
+ * Generic I/O
+ */
+
+#define readb(addr) \
+	({ unsigned char __v = (*(volatile unsigned char *)(addr)); __v; })
+#define readw(addr) \
+	({ unsigned short __v = (*(volatile unsigned short *)(addr)); __v; })
+#define readl(addr) \
+	({ unsigned int __v = (*(volatile unsigned int *)(addr)); __v; })
+#define writeb(b, addr) (void)((*(volatile unsigned char *)(addr)) = (b))
+#define writew(b, addr) (void)((*(volatile unsigned short *)(addr)) = (b))
+#define writel(b, addr) (void)((*(volatile unsigned int *)(addr)) = (b))
+
+static inline __u8 __raw_readb(const volatile void __iomem *addr)
+{
+          return *(__force volatile __u8 *)(addr);
+}
+static inline __u16 __raw_readw(const volatile void __iomem *addr)
+{
+          return *(__force volatile __u16 *)(addr);
+}
+static inline __u32 __raw_readl(const volatile void __iomem *addr)
+{
+          return *(__force volatile __u32 *)(addr);
+}
+static inline void __raw_writeb(__u8 b, volatile void __iomem *addr)
+{
+          *(__force volatile __u8 *)(addr) = b;
+}
+static inline void __raw_writew(__u16 b, volatile void __iomem *addr)
+{
+          *(__force volatile __u16 *)(addr) = b;
+}
+static inline void __raw_writel(__u32 b, volatile void __iomem *addr)
+{
+          *(__force volatile __u32 *)(addr) = b;
+}
+
+/* These are the definitions for the x86 IO instructions
+ * inb/inw/inl/outb/outw/outl, the "string" versions
+ * insb/insw/insl/outsb/outsw/outsl, and the "pausing" versions
+ * inb_p/inw_p/...
+ * The macros don't do byte-swapping.
+ */
+
+#define inb(port)		readb((u8 *)((port)))
+#define outb(val, port)		writeb((val),(u8 *)((unsigned long)(port)))
+#define inw(port)		readw((u16 *)((port)))
+#define outw(val, port)		writew((val),(u16 *)((unsigned long)(port)))
+#define inl(port)		readl((u32 *)((port)))
+#define outl(val, port)		writel((val),(u32 *)((unsigned long)(port)))
+
+#define inb_p(port)		inb((port))
+#define outb_p(val, port)	outb((val), (port))
+#define inw_p(port)		inw((port))
+#define outw_p(val, port)	outw((val), (port))
+#define inl_p(port)		inl((port))
+#define outl_p(val, port)	outl((val), (port))
+
+extern void insb (unsigned long port, void *dst, unsigned long count);
+extern void insw (unsigned long port, void *dst, unsigned long count);
+extern void insl (unsigned long port, void *dst, unsigned long count);
+extern void outsb (unsigned long port, const void *src, unsigned long count);
+extern void outsw (unsigned long port, const void *src, unsigned long count);
+extern void outsl (unsigned long port, const void *src, unsigned long count);
+
+#define IO_SPACE_LIMIT ~0
+
+#define memset_io(a,b,c)       memset((void *)(a),(b),(c))
+#define memcpy_fromio(a,b,c)   memcpy((a),(void *)(b),(c))
+#define memcpy_toio(a,b,c)      memcpy((void *)(a),(b),(c))
+
+/* At this point the Xtensa doesn't provide byte swap instructions */
+
+#ifdef __XTENSA_EB__
+# define in_8(addr) (*(u8*)(addr))
+# define in_le16(addr) _swapw(*(u16*)(addr))
+# define in_le32(addr) _swapl(*(u32*)(addr))
+# define out_8(b, addr) *(u8*)(addr) = (b)
+# define out_le16(b, addr) *(u16*)(addr) = _swapw(b)
+# define out_le32(b, addr) *(u32*)(addr) = _swapl(b)
+#elif defined(__XTENSA_EL__)
+# define in_8(addr)  (*(u8*)(addr))
+# define in_le16(addr) (*(u16*)(addr))
+# define in_le32(addr) (*(u32*)(addr))
+# define out_8(b, addr) *(u8*)(addr) = (b)
+# define out_le16(b, addr) *(u16*)(addr) = (b)
+# define out_le32(b, addr) *(u32*)(addr) = (b)
+#else
+# error processor byte order undefined!
+#endif
+
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem access
+ */
+#define xlate_dev_mem_ptr(p)    __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)   p
+
+
+#endif	/* __KERNEL__ */
+
+#endif	/* _XTENSA_IO_H */
diff --git a/arch/xtensa/include/asm/ioctl.h b/arch/xtensa/include/asm/ioctl.h
new file mode 100644
index 00000000..b279fe06
--- /dev/null
+++ b/arch/xtensa/include/asm/ioctl.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/arch/xtensa/include/asm/ioctls.h b/arch/xtensa/include/asm/ioctls.h
new file mode 100644
index 00000000..fd1d1369
--- /dev/null
+++ b/arch/xtensa/include/asm/ioctls.h
@@ -0,0 +1,120 @@
+/*
+ * include/asm-xtensa/ioctls.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 - 2005 Tensilica Inc.
+ *
+ * Derived from "include/asm-i386/ioctls.h"
+ */
+
+#ifndef _XTENSA_IOCTLS_H
+#define _XTENSA_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+#define FIOCLEX		_IO('f', 1)
+#define FIONCLEX	_IO('f', 2)
+#define FIOASYNC	_IOW('f', 125, int)
+#define FIONBIO		_IOW('f', 126, int)
+#define FIONREAD	_IOR('f', 127, int)
+#define TIOCINQ		FIONREAD
+#define FIOQSIZE	_IOR('f', 128, loff_t)
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+
+#define TCGETA		_IOR('t', 23, struct termio)
+#define TCSETA		_IOW('t', 24, struct termio)
+#define TCSETAW		_IOW('t', 25, struct termio)
+#define TCSETAF		_IOW('t', 28, struct termio)
+
+#define TCSBRK		_IO('t', 29)
+#define TCXONC		_IO('t', 30)
+#define TCFLSH		_IO('t', 31)
+
+#define TIOCSWINSZ	_IOW('t', 103, struct winsize)
+#define TIOCGWINSZ	_IOR('t', 104, struct winsize)
+#define	TIOCSTART	_IO('t', 110)		/* start output, like ^Q */
+#define	TIOCSTOP	_IO('t', 111)		/* stop output, like ^S */
+#define TIOCOUTQ        _IOR('t', 115, int)     /* output queue size */
+
+#define TIOCSPGRP	_IOW('t', 118, int)
+#define TIOCGPGRP	_IOR('t', 119, int)
+
+#define TIOCEXCL	_IO('T', 12)
+#define TIOCNXCL	_IO('T', 13)
+#define TIOCSCTTY	_IO('T', 14)
+
+#define TIOCSTI		_IOW('T', 18, char)
+#define TIOCMGET	_IOR('T', 21, unsigned int)
+#define TIOCMBIS	_IOW('T', 22, unsigned int)
+#define TIOCMBIC	_IOW('T', 23, unsigned int)
+#define TIOCMSET	_IOW('T', 24, unsigned int)
+# define TIOCM_LE	0x001
+# define TIOCM_DTR	0x002
+# define TIOCM_RTS	0x004
+# define TIOCM_ST	0x008
+# define TIOCM_SR	0x010
+# define TIOCM_CTS	0x020
+# define TIOCM_CAR	0x040
+# define TIOCM_RNG	0x080
+# define TIOCM_DSR	0x100
+# define TIOCM_CD	TIOCM_CAR
+# define TIOCM_RI	TIOCM_RNG
+
+#define TIOCGSOFTCAR	_IOR('T', 25, unsigned int)
+#define TIOCSSOFTCAR	_IOW('T', 26, unsigned int)
+#define TIOCLINUX	_IOW('T', 28, char)
+#define TIOCCONS	_IO('T', 29)
+#define TIOCGSERIAL	_IOR('T', 30, struct serial_struct)
+#define TIOCSSERIAL	_IOW('T', 31, struct serial_struct)
+#define TIOCPKT		_IOW('T', 32, int)
+# define TIOCPKT_DATA		 0
+# define TIOCPKT_FLUSHREAD	 1
+# define TIOCPKT_FLUSHWRITE	 2
+# define TIOCPKT_STOP		 4
+# define TIOCPKT_START		 8
+# define TIOCPKT_NOSTOP		16
+# define TIOCPKT_DOSTOP		32
+# define TIOCPKT_IOCTL		64
+
+
+#define TIOCNOTTY	_IO('T', 34)
+#define TIOCSETD	_IOW('T', 35, int)
+#define TIOCGETD	_IOR('T', 36, int)
+#define TCSBRKP		_IOW('T', 37, int)   /* Needed for POSIX tcsendbreak()*/
+#define TIOCTTYGSTRUCT	_IOR('T', 38, struct tty_struct) /* For debugging only*/
+#define TIOCSBRK	_IO('T', 39) 	     /* BSD compatibility */
+#define TIOCCBRK	_IO('T', 40)	     /* BSD compatibility */
+#define TIOCGSID	_IOR('T', 41, pid_t) /* Return the session ID of FD*/
+#define TCGETS2		_IOR('T', 42, struct termios2)
+#define TCSETS2		_IOW('T', 43, struct termios2)
+#define TCSETSW2	_IOW('T', 44, struct termios2)
+#define TCSETSF2	_IOW('T', 45, struct termios2)
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCGDEV	_IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
+#define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
+#define TIOCVHANGUP	_IO('T', 0x37)
+
+#define TIOCSERCONFIG	_IO('T', 83)
+#define TIOCSERGWILD	_IOR('T', 84,  int)
+#define TIOCSERSWILD	_IOW('T', 85,  int)
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458		     /* For debugging only */
+#define TIOCSERGETLSR   _IOR('T', 89, unsigned int) /* Get line status reg. */
+  /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+# define TIOCSER_TEMT    0x01		     /* Transmitter physically empty */
+#define TIOCSERGETMULTI _IOR('T', 90, struct serial_multiport_struct) /* Get multiport config  */
+#define TIOCSERSETMULTI _IOW('T', 91, struct serial_multiport_struct) /* Set multiport config */
+
+#define TIOCMIWAIT	_IO('T', 92) /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+
+#endif /* _XTENSA_IOCTLS_H */
diff --git a/arch/xtensa/include/asm/ipcbuf.h b/arch/xtensa/include/asm/ipcbuf.h
new file mode 100644
index 00000000..c33aa6a4
--- /dev/null
+++ b/arch/xtensa/include/asm/ipcbuf.h
@@ -0,0 +1,37 @@
+/*
+ * include/asm-xtensa/ipcbuf.h
+ *
+ * The ipc64_perm structure for the Xtensa architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_IPCBUF_H
+#define _XTENSA_IPCBUF_H
+
+/*
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of
+ * this archive for more details.
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+	unsigned long		seq;
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* _XTENSA_IPCBUF_H */
diff --git a/arch/xtensa/include/asm/irq.h b/arch/xtensa/include/asm/irq.h
new file mode 100644
index 00000000..4c0ccc9c
--- /dev/null
+++ b/arch/xtensa/include/asm/irq.h
@@ -0,0 +1,47 @@
+/*
+ * include/asm-xtensa/irq.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_IRQ_H
+#define _XTENSA_IRQ_H
+
+#include <linux/init.h>
+#include <platform/hardware.h>
+#include <variant/core.h>
+
+#ifdef CONFIG_VARIANT_IRQ_SWITCH
+#include <variant/irq.h>
+#else
+static inline void variant_irq_enable(unsigned int irq) { }
+static inline void variant_irq_disable(unsigned int irq) { }
+#endif
+
+#ifndef VARIANT_NR_IRQS
+# define VARIANT_NR_IRQS 0
+#endif
+#ifndef PLATFORM_NR_IRQS
+# define PLATFORM_NR_IRQS 0
+#endif
+#define XTENSA_NR_IRQS XCHAL_NUM_INTERRUPTS
+#define NR_IRQS (XTENSA_NR_IRQS + VARIANT_NR_IRQS + PLATFORM_NR_IRQS)
+
+#if VARIANT_NR_IRQS == 0
+static inline void variant_init_irq(void) { }
+#else
+void variant_init_irq(void) __init;
+#endif
+
+static __inline__ int irq_canonicalize(int irq)
+{
+	return (irq);
+}
+
+struct irqaction;
+
+#endif	/* _XTENSA_IRQ_H */
diff --git a/arch/xtensa/include/asm/irq_regs.h b/arch/xtensa/include/asm/irq_regs.h
new file mode 100644
index 00000000..3dd9c0b7
--- /dev/null
+++ b/arch/xtensa/include/asm/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/xtensa/include/asm/irqflags.h b/arch/xtensa/include/asm/irqflags.h
new file mode 100644
index 00000000..dae9a8bd
--- /dev/null
+++ b/arch/xtensa/include/asm/irqflags.h
@@ -0,0 +1,58 @@
+/*
+ * Xtensa IRQ flags handling functions
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_IRQFLAGS_H
+#define _XTENSA_IRQFLAGS_H
+
+#include <linux/types.h>
+
+static inline unsigned long arch_local_save_flags(void)
+{
+	unsigned long flags;
+	asm volatile("rsr %0,"__stringify(PS) : "=a" (flags));
+	return flags;
+}
+
+static inline unsigned long arch_local_irq_save(void)
+{
+	unsigned long flags;
+	asm volatile("rsil %0, "__stringify(LOCKLEVEL)
+		     : "=a" (flags) :: "memory");
+	return flags;
+}
+
+static inline void arch_local_irq_disable(void)
+{
+	arch_local_irq_save();
+}
+
+static inline void arch_local_irq_enable(void)
+{
+	unsigned long flags;
+	asm volatile("rsil %0, 0" : "=a" (flags) :: "memory");
+}
+
+static inline void arch_local_irq_restore(unsigned long flags)
+{
+	asm volatile("wsr %0, "__stringify(PS)" ; rsync"
+		     :: "a" (flags) : "memory");
+}
+
+static inline bool arch_irqs_disabled_flags(unsigned long flags)
+{
+	return (flags & 0xf) != 0;
+}
+
+static inline bool arch_irqs_disabled(void)
+{
+	return arch_irqs_disabled_flags(arch_local_save_flags());
+}
+
+#endif /* _XTENSA_IRQFLAGS_H */
diff --git a/arch/xtensa/include/asm/kdebug.h b/arch/xtensa/include/asm/kdebug.h
new file mode 100644
index 00000000..6ece1b03
--- /dev/null
+++ b/arch/xtensa/include/asm/kdebug.h
@@ -0,0 +1 @@
+#include <asm-generic/kdebug.h>
diff --git a/arch/xtensa/include/asm/kmap_types.h b/arch/xtensa/include/asm/kmap_types.h
new file mode 100644
index 00000000..11c687e5
--- /dev/null
+++ b/arch/xtensa/include/asm/kmap_types.h
@@ -0,0 +1,6 @@
+#ifndef _XTENSA_KMAP_TYPES_H
+#define _XTENSA_KMAP_TYPES_H
+
+#include <asm-generic/kmap_types.h>
+
+#endif	/* _XTENSA_KMAP_TYPES_H */
diff --git a/arch/xtensa/include/asm/linkage.h b/arch/xtensa/include/asm/linkage.h
new file mode 100644
index 00000000..bf2128a9
--- /dev/null
+++ b/arch/xtensa/include/asm/linkage.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-xtensa/linkage.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_LINKAGE_H
+#define _XTENSA_LINKAGE_H
+
+/* Nothing to do here ... */
+
+#endif	/* _XTENSA_LINKAGE_H */
diff --git a/arch/xtensa/include/asm/local.h b/arch/xtensa/include/asm/local.h
new file mode 100644
index 00000000..48723e55
--- /dev/null
+++ b/arch/xtensa/include/asm/local.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-xtensa/local.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_LOCAL_H
+#define _XTENSA_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* _XTENSA_LOCAL_H */
diff --git a/arch/xtensa/include/asm/local64.h b/arch/xtensa/include/asm/local64.h
new file mode 100644
index 00000000..36c93b5c
--- /dev/null
+++ b/arch/xtensa/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/xtensa/include/asm/mman.h b/arch/xtensa/include/asm/mman.h
new file mode 100644
index 00000000..30789010
--- /dev/null
+++ b/arch/xtensa/include/asm/mman.h
@@ -0,0 +1,92 @@
+/*
+ * include/asm-xtensa/mman.h
+ *
+ * Xtensa Processor memory-manager definitions
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995 by Ralf Baechle
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_MMAN_H
+#define _XTENSA_MMAN_H
+
+/*
+ * Protections are chosen from these bits, OR'd together.  The
+ * implementation does not necessarily support PROT_EXEC or PROT_WRITE
+ * without PROT_READ.  The only guarantees are that no writing will be
+ * allowed without PROT_WRITE and no access will be allowed for PROT_NONE.
+ */
+
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+
+#define PROT_SEM	0x10		/* page may be used for atomic ops */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end fo growsup vma */
+
+/*
+ * Flags for mmap
+ */
+#define MAP_SHARED	0x001		/* Share changes */
+#define MAP_PRIVATE	0x002		/* Changes are private */
+#define MAP_TYPE	0x00f		/* Mask for type of mapping */
+#define MAP_FIXED	0x010		/* Interpret addr exactly */
+
+/* not used by linux, but here to make sure we don't clash with ABI defines */
+#define MAP_RENAME	0x020		/* Assign page to file */
+#define MAP_AUTOGROW	0x040		/* File may grow by writing */
+#define MAP_LOCAL	0x080		/* Copy on fork/sproc */
+#define MAP_AUTORSRV	0x100		/* Logical swap reserved on demand */
+
+/* These are linux-specific */
+#define MAP_NORESERVE	0x0400		/* don't check for reservations */
+#define MAP_ANONYMOUS	0x0800		/* don't use a file */
+#define MAP_GROWSDOWN	0x1000		/* stack-like segment */
+#define MAP_DENYWRITE	0x2000		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x4000		/* mark it as an executable */
+#define MAP_LOCKED	0x8000		/* pages are locked */
+#define MAP_POPULATE	0x10000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x20000		/* do not block on IO */
+#define MAP_STACK	0x40000		/* give out an address that is best suited for process/thread stacks */
+#define MAP_HUGETLB	0x80000		/* create a huge page mapping */
+
+/*
+ * Flags for msync
+ */
+#define MS_ASYNC	0x0001		/* sync memory asynchronously */
+#define MS_INVALIDATE	0x0002		/* invalidate mappings & caches */
+#define MS_SYNC		0x0004		/* synchronous memory sync */
+
+/*
+ * Flags for mlockall
+ */
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#define MADV_NORMAL	0		/* no further special treatment */
+#define MADV_RANDOM	1		/* expect random page references */
+#define MADV_SEQUENTIAL	2		/* expect sequential page references */
+#define MADV_WILLNEED	3		/* will need these pages */
+#define MADV_DONTNEED	4		/* don't need these pages */
+
+/* common parameters: try to keep these consistent across architectures */
+#define MADV_REMOVE	9		/* remove these pages & resources */
+#define MADV_DONTFORK	10		/* don't inherit across fork */
+#define MADV_DOFORK	11		/* do inherit across fork */
+
+#define MADV_MERGEABLE   12		/* KSM may merge identical pages */
+#define MADV_UNMERGEABLE 13		/* KSM may not merge identical pages */
+
+#define MADV_HUGEPAGE	14		/* Worth backing with hugepages */
+#define MADV_NOHUGEPAGE	15		/* Not worth backing with hugepages */
+
+/* compatibility flags */
+#define MAP_FILE	0
+
+#endif /* _XTENSA_MMAN_H */
diff --git a/arch/xtensa/include/asm/mmu.h b/arch/xtensa/include/asm/mmu.h
new file mode 100644
index 00000000..04890d6e
--- /dev/null
+++ b/arch/xtensa/include/asm/mmu.h
@@ -0,0 +1,22 @@
+/*
+ * include/asm-xtensa/mmu.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_MMU_H
+#define _XTENSA_MMU_H
+
+#ifndef CONFIG_MMU
+#include <asm/nommu.h>
+#else
+
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_t;
+
+#endif /* CONFIG_MMU */
+#endif	/* _XTENSA_MMU_H */
diff --git a/arch/xtensa/include/asm/mmu_context.h b/arch/xtensa/include/asm/mmu_context.h
new file mode 100644
index 00000000..dbd8731a
--- /dev/null
+++ b/arch/xtensa/include/asm/mmu_context.h
@@ -0,0 +1,141 @@
+/*
+ * include/asm-xtensa/mmu_context.h
+ *
+ * Switch an MMU context.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_MMU_CONTEXT_H
+#define _XTENSA_MMU_CONTEXT_H
+
+#ifndef CONFIG_MMU
+#include <asm/nommu_context.h>
+#else
+
+#include <linux/stringify.h>
+#include <linux/sched.h>
+
+#include <variant/core.h>
+
+#include <asm/pgtable.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm-generic/mm_hooks.h>
+
+#if (XCHAL_HAVE_TLBS != 1)
+# error "Linux must have an MMU!"
+#endif
+
+extern unsigned long asid_cache;
+
+/*
+ * NO_CONTEXT is the invalid ASID value that we don't ever assign to
+ * any user or kernel context.
+ *
+ * 0 invalid
+ * 1 kernel
+ * 2 reserved
+ * 3 reserved
+ * 4...255 available
+ */
+
+#define NO_CONTEXT	0
+#define ASID_USER_FIRST	4
+#define ASID_MASK	((1 << XCHAL_MMU_ASID_BITS) - 1)
+#define ASID_INSERT(x)	(0x03020001 | (((x) & ASID_MASK) << 8))
+
+static inline void set_rasid_register (unsigned long val)
+{
+	__asm__ __volatile__ (" wsr %0, "__stringify(RASID)"\n\t"
+			      " isync\n" : : "a" (val));
+}
+
+static inline unsigned long get_rasid_register (void)
+{
+	unsigned long tmp;
+	__asm__ __volatile__ (" rsr %0,"__stringify(RASID)"\n\t" : "=a" (tmp));
+	return tmp;
+}
+
+static inline void
+__get_new_mmu_context(struct mm_struct *mm)
+{
+	extern void flush_tlb_all(void);
+	if (! (++asid_cache & ASID_MASK) ) {
+		flush_tlb_all(); /* start new asid cycle */
+		asid_cache += ASID_USER_FIRST;
+	}
+	mm->context = asid_cache;
+}
+
+static inline void
+__load_mmu_context(struct mm_struct *mm)
+{
+	set_rasid_register(ASID_INSERT(mm->context));
+	invalidate_page_directory();
+}
+
+/*
+ * Initialize the context related info for a new mm_struct
+ * instance.
+ */
+
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	mm->context = NO_CONTEXT;
+	return 0;
+}
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static inline void
+activate_mm(struct mm_struct *prev, struct mm_struct *next)
+{
+	/* Unconditionally get a new ASID.  */
+
+	__get_new_mmu_context(next);
+	__load_mmu_context(next);
+}
+
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+                             struct task_struct *tsk)
+{
+	unsigned long asid = asid_cache;
+
+	/* Check if our ASID is of an older version and thus invalid */
+
+	if (next->context == NO_CONTEXT || ((next->context^asid) & ~ASID_MASK))
+		__get_new_mmu_context(next);
+
+	__load_mmu_context(next);
+}
+
+#define deactivate_mm(tsk, mm)	do { } while(0)
+
+/*
+ * Destroy context related info for an mm_struct that is about
+ * to be put to rest.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+	invalidate_page_directory();
+}
+
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+	/* Nothing to do. */
+
+}
+
+#endif /* CONFIG_MMU */
+#endif /* _XTENSA_MMU_CONTEXT_H */
diff --git a/arch/xtensa/include/asm/module.h b/arch/xtensa/include/asm/module.h
new file mode 100644
index 00000000..d9b34bee
--- /dev/null
+++ b/arch/xtensa/include/asm/module.h
@@ -0,0 +1,27 @@
+/*
+ * include/asm-xtensa/module.h
+ *
+ * This file contains the module code specific to the Xtensa architecture.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_MODULE_H
+#define _XTENSA_MODULE_H
+
+struct mod_arch_specific
+{
+	/* No special elements, yet. */
+};
+
+#define MODULE_ARCH_VERMAGIC "xtensa-" __stringify(XCHAL_CORE_ID) " "
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+#endif	/* _XTENSA_MODULE_H */
diff --git a/arch/xtensa/include/asm/msgbuf.h b/arch/xtensa/include/asm/msgbuf.h
new file mode 100644
index 00000000..693c9675
--- /dev/null
+++ b/arch/xtensa/include/asm/msgbuf.h
@@ -0,0 +1,48 @@
+/*
+ * include/asm-xtensa/msgbuf.h
+ *
+ * The msqid64_ds structure for the Xtensa architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of
+ * this archive for more details.
+ */
+
+#ifndef _XTENSA_MSGBUF_H
+#define _XTENSA_MSGBUF_H
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+#ifdef __XTENSA_EB__
+	unsigned int	__unused1;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	unsigned int	__unused2;
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	unsigned int	__unused3;
+	__kernel_time_t msg_ctime;	/* last change time */
+#elif defined(__XTENSA_EL__)
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	unsigned int	__unused1;
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	unsigned int	__unused2;
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned int	__unused3;
+#else
+# error processor byte order undefined!
+#endif
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif	/* _XTENSA_MSGBUF_H */
diff --git a/arch/xtensa/include/asm/mutex.h b/arch/xtensa/include/asm/mutex.h
new file mode 100644
index 00000000..458c1f7f
--- /dev/null
+++ b/arch/xtensa/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/xtensa/include/asm/nommu.h b/arch/xtensa/include/asm/nommu.h
new file mode 100644
index 00000000..dce2c438
--- /dev/null
+++ b/arch/xtensa/include/asm/nommu.h
@@ -0,0 +1,3 @@
+typedef struct {
+	unsigned long end_brk;
+} mm_context_t;
diff --git a/arch/xtensa/include/asm/nommu_context.h b/arch/xtensa/include/asm/nommu_context.h
new file mode 100644
index 00000000..599e7a2e
--- /dev/null
+++ b/arch/xtensa/include/asm/nommu_context.h
@@ -0,0 +1,25 @@
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	return 0;
+}
+
+static inline void destroy_context(struct mm_struct *mm)
+{
+}
+
+static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
+{
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+				struct task_struct *tsk)
+{
+}
+
+static inline void deactivate_mm(struct task_struct *tsk, struct mm_struct *mm)
+{
+}
diff --git a/arch/xtensa/include/asm/page.h b/arch/xtensa/include/asm/page.h
new file mode 100644
index 00000000..7a5591a7
--- /dev/null
+++ b/arch/xtensa/include/asm/page.h
@@ -0,0 +1,180 @@
+/*
+ * include/asm-xtensa/page.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version2 as
+ * published by the Free Software Foundation.
+ *
+ * Copyright (C) 2001 - 2007 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_PAGE_H
+#define _XTENSA_PAGE_H
+
+#include <asm/processor.h>
+#include <asm/types.h>
+#include <asm/cache.h>
+#include <platform/hardware.h>
+
+/*
+ * Fixed TLB translations in the processor.
+ */
+
+#define XCHAL_KSEG_CACHED_VADDR 0xd0000000
+#define XCHAL_KSEG_BYPASS_VADDR 0xd8000000
+#define XCHAL_KSEG_PADDR        0x00000000
+#define XCHAL_KSEG_SIZE         0x08000000
+
+/*
+ * PAGE_SHIFT determines the page size
+ */
+
+#define PAGE_SHIFT		12
+#define PAGE_SIZE		(__XTENSA_UL_CONST(1) << PAGE_SHIFT)
+#define PAGE_MASK		(~(PAGE_SIZE-1))
+
+#ifdef CONFIG_MMU
+#define PAGE_OFFSET		XCHAL_KSEG_CACHED_VADDR
+#define MAX_MEM_PFN		XCHAL_KSEG_SIZE
+#else
+#define PAGE_OFFSET		0
+#define MAX_MEM_PFN		(PLATFORM_DEFAULT_MEM_START + PLATFORM_DEFAULT_MEM_SIZE)
+#endif
+
+#define PGTABLE_START		0x80000000
+
+/*
+ * Cache aliasing:
+ *
+ * If the cache size for one way is greater than the page size, we have to
+ * deal with cache aliasing. The cache index is wider than the page size:
+ *
+ * |    |cache| cache index
+ * | pfn  |off|	virtual address
+ * |xxxx:X|zzz|
+ * |    : |   |
+ * | \  / |   |
+ * |trans.|   |
+ * | /  \ |   |
+ * |yyyy:Y|zzz|	physical address
+ *
+ * When the page number is translated to the physical page address, the lowest
+ * bit(s) (X) that are part of the cache index are also translated (Y).
+ * If this translation changes bit(s) (X), the cache index is also afected,
+ * thus resulting in a different cache line than before.
+ * The kernel does not provide a mechanism to ensure that the page color
+ * (represented by this bit) remains the same when allocated or when pages
+ * are remapped. When user pages are mapped into kernel space, the color of
+ * the page might also change.
+ *
+ * We use the address space VMALLOC_END ... VMALLOC_END + DCACHE_WAY_SIZE * 2
+ * to temporarily map a patch so we can match the color.
+ */
+
+#if DCACHE_WAY_SIZE > PAGE_SIZE
+# define DCACHE_ALIAS_ORDER	(DCACHE_WAY_SHIFT - PAGE_SHIFT)
+# define DCACHE_ALIAS_MASK	(PAGE_MASK & (DCACHE_WAY_SIZE - 1))
+# define DCACHE_ALIAS(a)	(((a) & DCACHE_ALIAS_MASK) >> PAGE_SHIFT)
+# define DCACHE_ALIAS_EQ(a,b)	((((a) ^ (b)) & DCACHE_ALIAS_MASK) == 0)
+#else
+# define DCACHE_ALIAS_ORDER	0
+#endif
+
+#if ICACHE_WAY_SIZE > PAGE_SIZE
+# define ICACHE_ALIAS_ORDER	(ICACHE_WAY_SHIFT - PAGE_SHIFT)
+# define ICACHE_ALIAS_MASK	(PAGE_MASK & (ICACHE_WAY_SIZE - 1))
+# define ICACHE_ALIAS(a)	(((a) & ICACHE_ALIAS_MASK) >> PAGE_SHIFT)
+# define ICACHE_ALIAS_EQ(a,b)	((((a) ^ (b)) & ICACHE_ALIAS_MASK) == 0)
+#else
+# define ICACHE_ALIAS_ORDER	0
+#endif
+
+
+#ifdef __ASSEMBLY__
+
+#define __pgprot(x)	(x)
+
+#else
+
+/*
+ * These are used to make use of C type-checking..
+ */
+
+typedef struct { unsigned long pte; } pte_t;		/* page table entry */
+typedef struct { unsigned long pgd; } pgd_t;		/* PGD table entry */
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+
+#define pte_val(x)	((x).pte)
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+/*
+ * Pure 2^n version of get_order
+ * Use 'nsau' instructions if supported by the processor or the generic version.
+ */
+
+#if XCHAL_HAVE_NSA
+
+static inline __attribute_const__ int get_order(unsigned long size)
+{
+	int lz;
+	asm ("nsau %0, %1" : "=r" (lz) : "r" ((size - 1) >> PAGE_SHIFT));
+	return 32 - lz;
+}
+
+#else
+
+# include <asm-generic/getorder.h>
+
+#endif
+
+struct page;
+extern void clear_page(void *page);
+extern void copy_page(void *to, void *from);
+
+/*
+ * If we have cache aliasing and writeback caches, we might have to do
+ * some extra work
+ */
+
+#if DCACHE_WAY_SIZE > PAGE_SIZE
+extern void clear_user_page(void*, unsigned long, struct page*);
+extern void copy_user_page(void*, void*, unsigned long, struct page*);
+#else
+# define clear_user_page(page, vaddr, pg)	clear_page(page)
+# define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+#endif
+
+/*
+ * This handles the memory map.  We handle pages at
+ * XCHAL_KSEG_CACHED_VADDR for kernels with 32 bit address space.
+ * These macros are for conversion of kernel address, not user
+ * addresses.
+ */
+
+#define ARCH_PFN_OFFSET		(PLATFORM_DEFAULT_MEM_START >> PAGE_SHIFT)
+
+#define __pa(x)			((unsigned long) (x) - PAGE_OFFSET)
+#define __va(x)			((void *)((unsigned long) (x) + PAGE_OFFSET))
+#define pfn_valid(pfn)		((pfn) >= ARCH_PFN_OFFSET && ((pfn) - ARCH_PFN_OFFSET) < max_mapnr)
+#ifdef CONFIG_DISCONTIGMEM
+# error CONFIG_DISCONTIGMEM not supported
+#endif
+
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define page_to_virt(page)	__va(page_to_pfn(page) << PAGE_SHIFT)
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+
+#endif /* __ASSEMBLY__ */
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/memory_model.h>
+#endif /* _XTENSA_PAGE_H */
diff --git a/arch/xtensa/include/asm/param.h b/arch/xtensa/include/asm/param.h
new file mode 100644
index 00000000..ba03d5ae
--- /dev/null
+++ b/arch/xtensa/include/asm/param.h
@@ -0,0 +1,34 @@
+/*
+ * include/asm-xtensa/param.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_PARAM_H
+#define _XTENSA_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ		CONFIG_HZ	/* internal timer frequency */
+# define USER_HZ	100		/* for user interfaces in "ticks" */
+# define CLOCKS_PER_SEC (USER_HZ)	/* frequnzy at which times() counts */
+#else
+# define HZ		100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NGROUPS
+#define NGROUPS		32
+#endif
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif /* _XTENSA_PARAM_H */
diff --git a/arch/xtensa/include/asm/pci-bridge.h b/arch/xtensa/include/asm/pci-bridge.h
new file mode 100644
index 00000000..00fcbd7c
--- /dev/null
+++ b/arch/xtensa/include/asm/pci-bridge.h
@@ -0,0 +1,88 @@
+/*
+ * include/asm-xtensa/pci-bridge.h
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of
+ * this archive for more details.
+ *
+ * Copyright (C) 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_PCI_BRIDGE_H
+#define _XTENSA_PCI_BRIDGE_H
+
+#ifdef __KERNEL__
+
+struct device_node;
+struct pci_controller;
+
+/*
+ * pciauto_bus_scan() enumerates the pci space.
+ */
+
+extern int pciauto_bus_scan(struct pci_controller *, int);
+
+struct pci_space {
+	unsigned long start;
+	unsigned long end;
+	unsigned long base;
+};
+
+/*
+ * Structure of a PCI controller (host bridge)
+ */
+
+struct pci_controller {
+	int index;			/* used for pci_controller_num */
+	struct pci_controller *next;
+        struct pci_bus *bus;
+	void *arch_data;
+
+	int first_busno;
+	int last_busno;
+
+	struct pci_ops *ops;
+	volatile unsigned int *cfg_addr;
+	volatile unsigned char *cfg_data;
+
+	/* Currently, we limit ourselves to 1 IO range and 3 mem
+	 * ranges since the common pci_bus structure can't handle more
+	 */
+	struct resource	io_resource;
+	struct resource mem_resources[3];
+	int mem_resource_count;
+
+	/* Host bridge I/O and Memory space
+	 * Used for BAR placement algorithms
+	 */
+	struct pci_space io_space;
+	struct pci_space mem_space;
+
+	/* Return the interrupt number fo a device. */
+	int (*map_irq)(struct pci_dev*, u8, u8);
+
+};
+
+static inline void pcibios_init_resource(struct resource *res,
+		unsigned long start, unsigned long end, int flags, char *name)
+{
+	res->start = start;
+	res->end = end;
+	res->flags = flags;
+	res->name = name;
+	res->parent = NULL;
+	res->sibling = NULL;
+	res->child = NULL;
+}
+
+
+/* These are used for config access before all the PCI probing has been done. */
+int early_read_config_byte(struct pci_controller*, int, int, int, u8*);
+int early_read_config_word(struct pci_controller*, int, int, int, u16*);
+int early_read_config_dword(struct pci_controller*, int, int, int, u32*);
+int early_write_config_byte(struct pci_controller*, int, int, int, u8);
+int early_write_config_word(struct pci_controller*, int, int, int, u16);
+int early_write_config_dword(struct pci_controller*, int, int, int, u32);
+
+#endif	/* __KERNEL__ */
+#endif	/* _XTENSA_PCI_BRIDGE_H */
diff --git a/arch/xtensa/include/asm/pci.h b/arch/xtensa/include/asm/pci.h
new file mode 100644
index 00000000..4609b0f1
--- /dev/null
+++ b/arch/xtensa/include/asm/pci.h
@@ -0,0 +1,74 @@
+/*
+ * linux/include/asm-xtensa/pci.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_PCI_H
+#define _XTENSA_PCI_H
+
+#ifdef __KERNEL__
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+ * already-configured bus numbers - to be used for buggy BIOSes
+ * or architectures with incomplete PCI setup by the loader
+ */
+
+#define pcibios_assign_all_busses()	0
+
+extern struct pci_controller* pcibios_alloc_controller(void);
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+static inline void pcibios_penalize_isa_irq(int irq)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+/* Assume some values. (We should revise them, if necessary) */
+
+#define PCIBIOS_MIN_IO		0x2000
+#define PCIBIOS_MIN_MEM		0x10000000
+
+/* Dynamic DMA mapping stuff.
+ * Xtensa has everything mapped statically like x86.
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/scatterlist.h>
+#include <linux/string.h>
+#include <asm/io.h>
+
+struct pci_dev;
+
+/* The PCI address space does equal the physical memory address space.
+ * The networking and block device layers use this boolean for bounce buffer
+ * decisions.
+ */
+
+#define PCI_DMA_BUS_IS_PHYS	(1)
+
+/* Map a range of PCI memory or I/O space for a device into user space */
+int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
+                        enum pci_mmap_state mmap_state, int write_combine);
+
+/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
+#define HAVE_PCI_MMAP	1
+
+#endif /* __KERNEL__ */
+
+/* Implement the pci_ DMA API in terms of the generic device dma_ one */
+#include <asm-generic/pci-dma-compat.h>
+
+/* Generic PCI */
+#include <asm-generic/pci.h>
+
+#endif	/* _XTENSA_PCI_H */
diff --git a/arch/xtensa/include/asm/percpu.h b/arch/xtensa/include/asm/percpu.h
new file mode 100644
index 00000000..6d2bc2ad
--- /dev/null
+++ b/arch/xtensa/include/asm/percpu.h
@@ -0,0 +1,16 @@
+/*
+ * linux/include/asm-xtensa/percpu.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_PERCPU__
+#define _XTENSA_PERCPU__
+
+#include <asm-generic/percpu.h>
+
+#endif /* _XTENSA_PERCPU__ */
diff --git a/arch/xtensa/include/asm/pgalloc.h b/arch/xtensa/include/asm/pgalloc.h
new file mode 100644
index 00000000..40cf9bce
--- /dev/null
+++ b/arch/xtensa/include/asm/pgalloc.h
@@ -0,0 +1,74 @@
+/*
+ * include/asm-xtensa/pgalloc.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Copyright (C) 2001-2007 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_PGALLOC_H
+#define _XTENSA_PGALLOC_H
+
+#ifdef __KERNEL__
+
+#include <linux/highmem.h>
+#include <linux/slab.h>
+
+/*
+ * Allocating and freeing a pmd is trivial: the 1-entry pmd is
+ * inside the pgd, so has no extra memory associated with it.
+ */
+
+#define pmd_populate_kernel(mm, pmdp, ptep)				     \
+	(pmd_val(*(pmdp)) = ((unsigned long)ptep))
+#define pmd_populate(mm, pmdp, page)					     \
+	(pmd_val(*(pmdp)) = ((unsigned long)page_to_virt(page)))
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+static inline pgd_t*
+pgd_alloc(struct mm_struct *mm)
+{
+	return (pgd_t*) __get_free_pages(GFP_KERNEL | __GFP_ZERO, PGD_ORDER);
+}
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	free_page((unsigned long)pgd);
+}
+
+/* Use a slab cache for the pte pages (see also sparc64 implementation) */
+
+extern struct kmem_cache *pgtable_cache;
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, 
+					 unsigned long address)
+{
+	return kmem_cache_alloc(pgtable_cache, GFP_KERNEL|__GFP_REPEAT);
+}
+
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
+					unsigned long addr)
+{
+	struct page *page;
+
+	page = virt_to_page(pte_alloc_one_kernel(mm, addr));
+	pgtable_page_ctor(page);
+	return page;
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	kmem_cache_free(pgtable_cache, pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
+{
+	pgtable_page_dtor(pte);
+	kmem_cache_free(pgtable_cache, page_address(pte));
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+#endif /* __KERNEL__ */
+#endif /* _XTENSA_PGALLOC_H */
diff --git a/arch/xtensa/include/asm/pgtable.h b/arch/xtensa/include/asm/pgtable.h
new file mode 100644
index 00000000..b03c043c
--- /dev/null
+++ b/arch/xtensa/include/asm/pgtable.h
@@ -0,0 +1,416 @@
+/*
+ * include/asm-xtensa/pgtable.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Copyright (C) 2001 - 2007 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_PGTABLE_H
+#define _XTENSA_PGTABLE_H
+
+#include <asm-generic/pgtable-nopmd.h>
+#include <asm/page.h>
+
+/*
+ * We only use two ring levels, user and kernel space.
+ */
+
+#define USER_RING		1	/* user ring level */
+#define KERNEL_RING		0	/* kernel ring level */
+
+/*
+ * The Xtensa architecture port of Linux has a two-level page table system,
+ * i.e. the logical three-level Linux page table layout is folded.
+ * Each task has the following memory page tables:
+ *
+ *   PGD table (page directory), ie. 3rd-level page table:
+ *	One page (4 kB) of 1024 (PTRS_PER_PGD) pointers to PTE tables
+ *	(Architectures that don't have the PMD folded point to the PMD tables)
+ *
+ *	The pointer to the PGD table for a given task can be retrieved from
+ *	the task structure (struct task_struct*) t, e.g. current():
+ *	  (t->mm ? t->mm : t->active_mm)->pgd
+ *
+ *   PMD tables (page middle-directory), ie. 2nd-level page tables:
+ *	Absent for the Xtensa architecture (folded, PTRS_PER_PMD == 1).
+ *
+ *   PTE tables (page table entry), ie. 1st-level page tables:
+ *	One page (4 kB) of 1024 (PTRS_PER_PTE) PTEs with a special PTE
+ *	invalid_pte_table for absent mappings.
+ *
+ * The individual pages are 4 kB big with special pages for the empty_zero_page.
+ */
+
+#define PGDIR_SHIFT	22
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/*
+ * Entries per page directory level: we use two-level, so
+ * we don't really have any PMD directory physically.
+ */
+#define PTRS_PER_PTE		1024
+#define PTRS_PER_PTE_SHIFT	10
+#define PTRS_PER_PGD		1024
+#define PGD_ORDER		0
+#define USER_PTRS_PER_PGD	(TASK_SIZE/PGDIR_SIZE)
+#define FIRST_USER_ADDRESS	0
+#define FIRST_USER_PGD_NR	(FIRST_USER_ADDRESS >> PGDIR_SHIFT)
+
+/*
+ * Virtual memory area. We keep a distance to other memory regions to be
+ * on the safe side. We also use this area for cache aliasing.
+ */
+
+#define VMALLOC_START		0xC0000000
+#define VMALLOC_END		0xC7FEFFFF
+#define TLBTEMP_BASE_1		0xC7FF0000
+#define TLBTEMP_BASE_2		0xC7FF8000
+
+/*
+ * Xtensa Linux config PTE layout (when present):
+ *	31-12:	PPN
+ *	11-6:	Software
+ *	5-4:	RING
+ *	3-0:	CA
+ *
+ * Similar to the Alpha and MIPS ports, we need to keep track of the ref
+ * and mod bits in software.  We have a software "you can read
+ * from this page" bit, and a hardware one which actually lets the
+ * process read from the page.  On the same token we have a software
+ * writable bit and the real hardware one which actually lets the
+ * process write to the page.
+ *
+ * See further below for PTE layout for swapped-out pages.
+ */
+
+#define _PAGE_HW_EXEC		(1<<0)	/* hardware: page is executable */
+#define _PAGE_HW_WRITE		(1<<1)	/* hardware: page is writable */
+
+#define _PAGE_FILE		(1<<1)	/* non-linear mapping, if !present */
+#define _PAGE_PROTNONE		(3<<0)	/* special case for VM_PROT_NONE */
+
+/* None of these cache modes include MP coherency:  */
+#define _PAGE_CA_BYPASS		(0<<2)	/* bypass, non-speculative */
+#define _PAGE_CA_WB		(1<<2)	/* write-back */
+#define _PAGE_CA_WT		(2<<2)	/* write-through */
+#define _PAGE_CA_MASK		(3<<2)
+#define _PAGE_INVALID		(3<<2)
+
+#define _PAGE_USER		(1<<4)	/* user access (ring=1) */
+
+/* Software */
+#define _PAGE_WRITABLE_BIT	6
+#define _PAGE_WRITABLE		(1<<6)	/* software: page writable */
+#define _PAGE_DIRTY		(1<<7)	/* software: page dirty */
+#define _PAGE_ACCESSED		(1<<8)	/* software: page accessed (read) */
+
+/* On older HW revisions, we always have to set bit 0 */
+#if XCHAL_HW_VERSION_MAJOR < 2000
+# define _PAGE_VALID		(1<<0)
+#else
+# define _PAGE_VALID		0
+#endif
+
+#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _PAGE_PRESENT	(_PAGE_VALID | _PAGE_CA_WB | _PAGE_ACCESSED)
+
+#ifdef CONFIG_MMU
+
+#define PAGE_NONE	   __pgprot(_PAGE_INVALID | _PAGE_USER | _PAGE_PROTNONE)
+#define PAGE_COPY	   __pgprot(_PAGE_PRESENT | _PAGE_USER)
+#define PAGE_COPY_EXEC	   __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_HW_EXEC)
+#define PAGE_READONLY	   __pgprot(_PAGE_PRESENT | _PAGE_USER)
+#define PAGE_READONLY_EXEC __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_HW_EXEC)
+#define PAGE_SHARED	   __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_WRITABLE)
+#define PAGE_SHARED_EXEC \
+	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_WRITABLE | _PAGE_HW_EXEC)
+#define PAGE_KERNEL	   __pgprot(_PAGE_PRESENT | _PAGE_HW_WRITE)
+#define PAGE_KERNEL_EXEC   __pgprot(_PAGE_PRESENT|_PAGE_HW_WRITE|_PAGE_HW_EXEC)
+
+#if (DCACHE_WAY_SIZE > PAGE_SIZE)
+# define _PAGE_DIRECTORY (_PAGE_VALID | _PAGE_ACCESSED)
+#else
+# define _PAGE_DIRECTORY (_PAGE_VALID | _PAGE_ACCESSED | _PAGE_CA_WB)
+#endif
+
+#else /* no mmu */
+
+# define PAGE_NONE       __pgprot(0)
+# define PAGE_SHARED     __pgprot(0)
+# define PAGE_COPY       __pgprot(0)
+# define PAGE_READONLY   __pgprot(0)
+# define PAGE_KERNEL     __pgprot(0)
+
+#endif
+
+/*
+ * On certain configurations of Xtensa MMUs (eg. the initial Linux config),
+ * the MMU can't do page protection for execute, and considers that the same as
+ * read.  Also, write permissions may imply read permissions.
+ * What follows is the closest we can get by reasonable means..
+ * See linux/mm/mmap.c for protection_map[] array that uses these definitions.
+ */
+#define __P000	PAGE_NONE		/* private --- */
+#define __P001	PAGE_READONLY		/* private --r */
+#define __P010	PAGE_COPY		/* private -w- */
+#define __P011	PAGE_COPY		/* private -wr */
+#define __P100	PAGE_READONLY_EXEC	/* private x-- */
+#define __P101	PAGE_READONLY_EXEC	/* private x-r */
+#define __P110	PAGE_COPY_EXEC		/* private xw- */
+#define __P111	PAGE_COPY_EXEC		/* private xwr */
+
+#define __S000	PAGE_NONE		/* shared  --- */
+#define __S001	PAGE_READONLY		/* shared  --r */
+#define __S010	PAGE_SHARED		/* shared  -w- */
+#define __S011	PAGE_SHARED		/* shared  -wr */
+#define __S100	PAGE_READONLY_EXEC	/* shared  x-- */
+#define __S101	PAGE_READONLY_EXEC	/* shared  x-r */
+#define __S110	PAGE_SHARED_EXEC	/* shared  xw- */
+#define __S111	PAGE_SHARED_EXEC	/* shared  xwr */
+
+#ifndef __ASSEMBLY__
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd entry %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+extern unsigned long empty_zero_page[1024];
+
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+#ifdef CONFIG_MMU
+extern pgd_t swapper_pg_dir[PAGE_SIZE/sizeof(pgd_t)];
+extern void paging_init(void);
+extern void pgtable_cache_init(void);
+#else
+# define swapper_pg_dir NULL
+static inline void paging_init(void) { }
+static inline void pgtable_cache_init(void) { }
+#endif
+
+/*
+ * The pmd contains the kernel virtual address of the pte page.
+ */
+#define pmd_page_vaddr(pmd) ((unsigned long)(pmd_val(pmd) & PAGE_MASK))
+#define pmd_page(pmd) virt_to_page(pmd_val(pmd))
+
+/*
+ * pte status.
+ */
+#define pte_none(pte)	 (pte_val(pte) == _PAGE_INVALID)
+#define pte_present(pte)						\
+	(((pte_val(pte) & _PAGE_CA_MASK) != _PAGE_INVALID)		\
+	 || ((pte_val(pte) & _PAGE_PROTNONE) == _PAGE_PROTNONE))
+#define pte_clear(mm,addr,ptep)						\
+	do { update_pte(ptep, __pte(_PAGE_INVALID)); } while(0)
+
+#define pmd_none(pmd)	 (!pmd_val(pmd))
+#define pmd_present(pmd) (pmd_val(pmd) & PAGE_MASK)
+#define pmd_bad(pmd)	 (pmd_val(pmd) & ~PAGE_MASK)
+#define pmd_clear(pmdp)	 do { set_pmd(pmdp, __pmd(0)); } while (0)
+
+static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_WRITABLE; }
+static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte)  { return pte_val(pte) & _PAGE_FILE; }
+static inline int pte_special(pte_t pte) { return 0; }
+
+static inline pte_t pte_wrprotect(pte_t pte)	
+	{ pte_val(pte) &= ~(_PAGE_WRITABLE | _PAGE_HW_WRITE); return pte; }
+static inline pte_t pte_mkclean(pte_t pte)
+	{ pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HW_WRITE); return pte; }
+static inline pte_t pte_mkold(pte_t pte)
+	{ pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte)
+	{ pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte)
+	{ pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte)
+	{ pte_val(pte) |= _PAGE_WRITABLE; return pte; }
+static inline pte_t pte_mkspecial(pte_t pte)
+	{ return pte; }
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
+#define pte_same(a,b)		(pte_val(a) == pte_val(b))
+#define pte_page(x)		pfn_to_page(pte_pfn(x))
+#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
+}
+
+/*
+ * Certain architectures need to do special things when pte's
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+static inline void update_pte(pte_t *ptep, pte_t pteval)
+{
+	*ptep = pteval;
+#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK
+	__asm__ __volatile__ ("dhwb %0, 0" :: "a" (ptep));
+#endif
+
+}
+
+struct mm_struct;
+
+static inline void
+set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pteval)
+{
+	update_pte(ptep, pteval);
+}
+
+
+static inline void
+set_pmd(pmd_t *pmdp, pmd_t pmdval)
+{
+	*pmdp = pmdval;
+}
+
+struct vm_area_struct;
+
+static inline int
+ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr,
+    			  pte_t *ptep)
+{
+	pte_t pte = *ptep;
+	if (!pte_young(pte))
+		return 0;
+	update_pte(ptep, pte_mkold(pte));
+	return 1;
+}
+
+static inline pte_t
+ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	pte_t pte = *ptep;
+	pte_clear(mm, addr, ptep);
+	return pte;
+}
+
+static inline void
+ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+  	pte_t pte = *ptep;
+  	update_pte(ptep, pte_wrprotect(pte));
+}
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address)	pgd_offset(&init_mm, address)
+
+/* to find an entry in a page-table-directory */
+#define pgd_offset(mm,address)	((mm)->pgd + pgd_index(address))
+
+#define pgd_index(address)	((address) >> PGDIR_SHIFT)
+
+/* Find an entry in the second-level page table.. */
+#define pmd_offset(dir,address) ((pmd_t*)(dir))
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(address)	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir,addr) 					\
+	((pte_t*) pmd_page_vaddr(*(dir)) + pte_index(addr))
+#define pte_offset_map(dir,addr)	pte_offset_kernel((dir),(addr))
+#define pte_unmap(pte)		do { } while (0)
+
+
+/*
+ * Encode and decode a swap entry.
+ *
+ * Format of swap pte:
+ *  bit	   0	   MBZ
+ *  bit	   1	   page-file (must be zero)
+ *  bits   2 -  3  page hw access mode (must be 11: _PAGE_INVALID)
+ *  bits   4 -  5  ring protection (must be 01: _PAGE_USER)
+ *  bits   6 - 10  swap type (5 bits -> 32 types)
+ *  bits  11 - 31  swap offset / PAGE_SIZE (21 bits -> 8GB)
+ 
+ * Format of file pte:
+ *  bit	   0	   MBZ
+ *  bit	   1	   page-file (must be one: _PAGE_FILE)
+ *  bits   2 -  3  page hw access mode (must be 11: _PAGE_INVALID)
+ *  bits   4 -  5  ring protection (must be 01: _PAGE_USER)
+ *  bits   6 - 31  file offset / PAGE_SIZE
+ */
+
+#define __swp_type(entry)	(((entry).val >> 6) & 0x1f)
+#define __swp_offset(entry)	((entry).val >> 11)
+#define __swp_entry(type,offs)	\
+	((swp_entry_t) {((type) << 6) | ((offs) << 11) | _PAGE_INVALID})
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+#define PTE_FILE_MAX_BITS	28
+#define pte_to_pgoff(pte)	(pte_val(pte) >> 4)
+#define pgoff_to_pte(off)	\
+	((pte_t) { ((off) << 4) | _PAGE_INVALID | _PAGE_FILE })
+
+#endif /*  !defined (__ASSEMBLY__) */
+
+
+#ifdef __ASSEMBLY__
+
+/* Assembly macro _PGD_INDEX is the same as C pgd_index(unsigned long),
+ *                _PGD_OFFSET as C pgd_offset(struct mm_struct*, unsigned long),
+ *                _PMD_OFFSET as C pmd_offset(pgd_t*, unsigned long)
+ *                _PTE_OFFSET as C pte_offset(pmd_t*, unsigned long)
+ *
+ * Note: We require an additional temporary register which can be the same as
+ *       the register that holds the address.
+ *
+ * ((pte_t*) ((unsigned long)(pmd_val(*pmd) & PAGE_MASK)) + pte_index(addr))
+ *
+ */
+#define _PGD_INDEX(rt,rs)	extui	rt, rs, PGDIR_SHIFT, 32-PGDIR_SHIFT
+#define _PTE_INDEX(rt,rs)	extui	rt, rs, PAGE_SHIFT, PTRS_PER_PTE_SHIFT
+
+#define _PGD_OFFSET(mm,adr,tmp)		l32i	mm, mm, MM_PGD;		\
+					_PGD_INDEX(tmp, adr);		\
+					addx4	mm, tmp, mm
+
+#define _PTE_OFFSET(pmd,adr,tmp)	_PTE_INDEX(tmp, adr);		\
+					srli	pmd, pmd, PAGE_SHIFT;	\
+					slli	pmd, pmd, PAGE_SHIFT;	\
+					addx4	pmd, tmp, pmd
+
+#else
+
+#define kern_addr_valid(addr)	(1)
+
+extern  void update_mmu_cache(struct vm_area_struct * vma,
+			      unsigned long address, pte_t *ptep);
+
+/*
+ * remap a physical page `pfn' of size `size' with page protection `prot'
+ * into virtual address `from'
+ */
+
+#define io_remap_pfn_range(vma,from,pfn,size,prot) \
+                remap_pfn_range(vma, from, pfn, size, prot)
+
+typedef pte_t *pte_addr_t;
+
+#endif /* !defined (__ASSEMBLY__) */
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define __HAVE_ARCH_PTEP_MKDIRTY
+#define __HAVE_ARCH_PTE_SAME
+
+#include <asm-generic/pgtable.h>
+
+#endif /* _XTENSA_PGTABLE_H */
diff --git a/arch/xtensa/include/asm/platform.h b/arch/xtensa/include/asm/platform.h
new file mode 100644
index 00000000..7d936e58
--- /dev/null
+++ b/arch/xtensa/include/asm/platform.h
@@ -0,0 +1,78 @@
+/*
+ * Platform specific functions
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of
+ * this archive for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_PLATFORM_H
+#define _XTENSA_PLATFORM_H
+
+#include <linux/types.h>
+#include <linux/pci.h>
+
+#include <asm/bootparam.h>
+
+/*
+ * platform_init is called before the mmu is initialized to give the
+ * platform a early hook-up. bp_tag_t is a list of configuration tags
+ * passed from the boot-loader.
+ */
+extern void platform_init(bp_tag_t*);
+
+/*
+ * platform_setup is called from setup_arch with a pointer to the command-line
+ * string.
+ */
+extern void platform_setup (char **);
+
+/*
+ * platform_init_irq is called from init_IRQ.
+ */
+extern void platform_init_irq (void);
+
+/*
+ * platform_restart is called to restart the system.
+ */
+extern void platform_restart (void);
+
+/*
+ * platform_halt is called to stop the system and halt.
+ */
+extern void platform_halt (void);
+
+/*
+ * platform_power_off is called to stop the system and power it off.
+ */
+extern void platform_power_off (void);
+
+/*
+ * platform_idle is called from the idle function.
+ */
+extern void platform_idle (void);
+
+/*
+ * platform_heartbeat is called every HZ
+ */
+extern void platform_heartbeat (void);
+
+/*
+ * platform_pcibios_init is called to allow the platform to setup the pci bus.
+ */
+extern void platform_pcibios_init (void);
+
+/*
+ * platform_pcibios_fixup allows to modify the PCI configuration.
+ */
+extern int platform_pcibios_fixup (void);
+
+/*
+ * platform_calibrate_ccount calibrates cpu clock freq (CONFIG_XTENSA_CALIBRATE)
+ */
+extern void platform_calibrate_ccount (void);
+
+#endif	/* _XTENSA_PLATFORM_H */
+
diff --git a/arch/xtensa/include/asm/poll.h b/arch/xtensa/include/asm/poll.h
new file mode 100644
index 00000000..9d2d5993
--- /dev/null
+++ b/arch/xtensa/include/asm/poll.h
@@ -0,0 +1,20 @@
+/*
+ * include/asm-xtensa/poll.h
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of
+ * this archive for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_POLL_H
+#define _XTENSA_POLL_H
+
+#define POLLWRNORM	POLLOUT
+#define POLLWRBAND	0x0100
+#define POLLREMOVE	0x0800
+
+#include <asm-generic/poll.h>
+
+#endif /* _XTENSA_POLL_H */
diff --git a/arch/xtensa/include/asm/posix_types.h b/arch/xtensa/include/asm/posix_types.h
new file mode 100644
index 00000000..43f9dd11
--- /dev/null
+++ b/arch/xtensa/include/asm/posix_types.h
@@ -0,0 +1,122 @@
+/*
+ * include/asm-xtensa/posix_types.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Largely copied from include/asm-ppc/posix_types.h
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_POSIX_TYPES_H
+#define _XTENSA_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned int	__kernel_mode_t;
+typedef unsigned long	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef unsigned short	__kernel_ipc_pid_t;
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+typedef unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef long		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+
+typedef unsigned short	__kernel_old_uid_t;
+typedef unsigned short	__kernel_old_gid_t;
+typedef unsigned short	__kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+#ifndef __GNUC__
+
+#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+#define	__FD_ISSET(d, set)	((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
+#define	__FD_ZERO(set)	\
+  ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set)))
+
+#else /* __GNUC__ */
+
+#if defined(__KERNEL__)
+/* With GNU C, use inline functions instead so args are evaluated only once: */
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long fd, __kernel_fd_set *p)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *p)
+{
+	unsigned int *tmp = (unsigned int *)p->fds_bits;
+	int i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+			case 8:
+				tmp[0] = 0; tmp[1] = 0; tmp[2] = 0; tmp[3] = 0;
+				tmp[4] = 0; tmp[5] = 0; tmp[6] = 0; tmp[7] = 0;
+				return;
+		}
+	}
+	i = __FDSET_LONGS;
+	while (i) {
+		i--;
+		*tmp = 0;
+		tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) */
+#endif /* __GNUC__ */
+#endif /* _XTENSA_POSIX_TYPES_H */
diff --git a/arch/xtensa/include/asm/processor.h b/arch/xtensa/include/asm/processor.h
new file mode 100644
index 00000000..3acb26e8
--- /dev/null
+++ b/arch/xtensa/include/asm/processor.h
@@ -0,0 +1,200 @@
+/*
+ * include/asm-xtensa/processor.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_PROCESSOR_H
+#define _XTENSA_PROCESSOR_H
+
+#include <variant/core.h>
+#include <platform/hardware.h>
+
+#include <linux/compiler.h>
+#include <asm/ptrace.h>
+#include <asm/types.h>
+#include <asm/regs.h>
+
+/* Assertions. */
+
+#if (XCHAL_HAVE_WINDOWED != 1)
+# error Linux requires the Xtensa Windowed Registers Option.
+#endif
+
+#define ARCH_SLAB_MINALIGN	XCHAL_DATA_WIDTH
+
+/*
+ * User space process size: 1 GB.
+ * Windowed call ABI requires caller and callee to be located within the same
+ * 1 GB region. The C compiler places trampoline code on the stack for sources
+ * that take the address of a nested C function (a feature used by glibc), so
+ * the 1 GB requirement applies to the stack as well.
+ */
+
+#ifdef CONFIG_MMU
+#define TASK_SIZE	__XTENSA_UL_CONST(0x40000000)
+#else
+#define TASK_SIZE	(PLATFORM_DEFAULT_MEM_START + PLATFORM_DEFAULT_MEM_SIZE)
+#endif
+
+#define STACK_TOP	TASK_SIZE
+#define STACK_TOP_MAX	STACK_TOP
+
+/*
+ * General exception cause assigned to debug exceptions. Debug exceptions go
+ * to their own vector, rather than the general exception vectors (user,
+ * kernel, double); and their specific causes are reported via DEBUGCAUSE
+ * rather than EXCCAUSE.  However it is sometimes convenient to redirect debug
+ * exceptions to the general exception mechanism.  To do this, an otherwise
+ * unused EXCCAUSE value was assigned to debug exceptions for this purpose.
+ */
+
+#define EXCCAUSE_MAPPED_DEBUG	63
+
+/*
+ * We use DEPC also as a flag to distinguish between double and regular
+ * exceptions. For performance reasons, DEPC might contain the value of
+ * EXCCAUSE for regular exceptions, so we use this definition to mark a
+ * valid double exception address.
+ * (Note: We use it in bgeui, so it should be 64, 128, or 256)
+ */
+
+#define VALID_DOUBLE_EXCEPTION_ADDRESS	64
+
+/* LOCKLEVEL defines the interrupt level that masks all
+ * general-purpose interrupts.
+ */
+#define LOCKLEVEL 1
+
+/* WSBITS and WBBITS are the width of the WINDOWSTART and WINDOWBASE
+ * registers
+ */
+#define WSBITS  (XCHAL_NUM_AREGS / 4)      /* width of WINDOWSTART in bits */
+#define WBBITS  (XCHAL_NUM_AREGS_LOG2 - 2) /* width of WINDOWBASE in bits */
+
+#ifndef __ASSEMBLY__
+
+/* Build a valid return address for the specified call winsize.
+ * winsize must be 1 (call4), 2 (call8), or 3 (call12)
+ */
+#define MAKE_RA_FOR_CALL(ra,ws)   (((ra) & 0x3fffffff) | (ws) << 30)
+
+/* Convert return address to a valid pc
+ * Note: We assume that the stack pointer is in the same 1GB ranges as the ra
+ */
+#define MAKE_PC_FROM_RA(ra,sp)    (((ra) & 0x3fffffff) | ((sp) & 0xc0000000))
+
+typedef struct {
+    unsigned long seg;
+} mm_segment_t;
+
+struct thread_struct {
+
+	/* kernel's return address and stack pointer for context switching */
+	unsigned long ra; /* kernel's a0: return address and window call size */
+	unsigned long sp; /* kernel's a1: stack pointer */
+
+	mm_segment_t current_ds;    /* see uaccess.h for example uses */
+
+	/* struct xtensa_cpuinfo info; */
+
+	unsigned long bad_vaddr; /* last user fault */
+	unsigned long bad_uaddr; /* last kernel fault accessing user space */
+	unsigned long error_code;
+
+	unsigned long ibreak[XCHAL_NUM_IBREAK];
+	unsigned long dbreaka[XCHAL_NUM_DBREAK];
+	unsigned long dbreakc[XCHAL_NUM_DBREAK];
+
+	/* Make structure 16 bytes aligned. */
+	int align[0] __attribute__ ((aligned(16)));
+};
+
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr()  ({ __label__ _l; _l: &&_l;})
+
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	(TASK_SIZE / 2)
+
+#define INIT_THREAD  \
+{									\
+	ra:		0, 						\
+	sp:		sizeof(init_stack) + (long) &init_stack,	\
+	current_ds:	{0},						\
+	/*info:		{0}, */						\
+	bad_vaddr:	0,						\
+	bad_uaddr:	0,						\
+	error_code:	0,						\
+}
+
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ * Note: We set-up ps as if we did a call4 to the new pc.
+ *       set_thread_state in signal.c depends on it.
+ */
+#define USER_PS_VALUE ((1 << PS_WOE_BIT) |				\
+                       (1 << PS_CALLINC_SHIFT) |			\
+                       (USER_RING << PS_RING_SHIFT) |			\
+                       (1 << PS_UM_BIT) |				\
+                       (1 << PS_EXCM_BIT))
+
+/* Clearing a0 terminates the backtrace. */
+#define start_thread(regs, new_pc, new_sp) \
+	regs->pc = new_pc; \
+	regs->ps = USER_PS_VALUE; \
+	regs->areg[1] = new_sp; \
+	regs->areg[0] = 0; \
+	regs->wmask = 1; \
+	regs->depc = 0; \
+	regs->windowbase = 0; \
+	regs->windowstart = 1;
+
+/* Forward declaration */
+struct task_struct;
+struct mm_struct;
+
+/* Free all resources held by a thread. */
+#define release_thread(thread) do { } while(0)
+
+/* Prepare to copy thread state - unlazy all lazy status */
+extern void prepare_to_copy(struct task_struct*);
+
+/* Create a kernel thread without removing it from tasklists */
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/* Copy and release all segment info associated with a VM */
+#define copy_segments(p, mm)	do { } while(0)
+#define release_segments(mm)	do { } while(0)
+#define forget_segments()	do { } while (0)
+
+#define thread_saved_pc(tsk)	(task_pt_regs(tsk)->pc)
+
+extern unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk)		(task_pt_regs(tsk)->pc)
+#define KSTK_ESP(tsk)		(task_pt_regs(tsk)->areg[1])
+
+#define cpu_relax()  barrier()
+
+/* Special register access. */
+
+#define WSR(v,sr) __asm__ __volatile__ ("wsr %0,"__stringify(sr) :: "a"(v));
+#define RSR(v,sr) __asm__ __volatile__ ("rsr %0,"__stringify(sr) : "=a"(v));
+
+#define set_sr(x,sr) ({unsigned int v=(unsigned int)x; WSR(v,sr);})
+#define get_sr(sr) ({unsigned int v; RSR(v,sr); v; })
+
+#endif	/* __ASSEMBLY__ */
+#endif	/* _XTENSA_PROCESSOR_H */
diff --git a/arch/xtensa/include/asm/ptrace.h b/arch/xtensa/include/asm/ptrace.h
new file mode 100644
index 00000000..0d42c934
--- /dev/null
+++ b/arch/xtensa/include/asm/ptrace.h
@@ -0,0 +1,138 @@
+/*
+ * include/asm-xtensa/ptrace.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_PTRACE_H
+#define _XTENSA_PTRACE_H
+
+/*
+ * Kernel stack
+ *
+ * 		+-----------------------+  -------- STACK_SIZE
+ * 		|     register file     |  |
+ * 		+-----------------------+  |
+ * 		|    struct pt_regs     |  |
+ * 		+-----------------------+  | ------ PT_REGS_OFFSET
+ * double 	:  16 bytes spill area  :  |  ^
+ * excetion 	:- - - - - - - - - - - -:  |  |
+ * frame	:    struct pt_regs     :  |  |
+ * 		:- - - - - - - - - - - -:  |  |
+ * 		|                       |  |  |
+ * 		|     memory stack      |  |  |
+ * 		|                       |  |  |
+ * 		~                       ~  ~  ~
+ * 		~                       ~  ~  ~
+ * 		|                       |  |  |
+ * 		|                       |  |  |
+ * 		+-----------------------+  |  | --- STACK_BIAS
+ * 		|  struct task_struct   |  |  |  ^
+ *  current --> +-----------------------+  |  |  |
+ * 		|  struct thread_info   |  |  |  |
+ *		+-----------------------+ --------
+ */
+
+#define KERNEL_STACK_SIZE (2 * PAGE_SIZE)
+
+/*  Offsets for exception_handlers[] (3 x 64-entries x 4-byte tables). */
+
+#define EXC_TABLE_KSTK		0x004	/* Kernel Stack */
+#define EXC_TABLE_DOUBLE_SAVE	0x008	/* Double exception save area for a0 */
+#define EXC_TABLE_FIXUP		0x00c	/* Fixup handler */
+#define EXC_TABLE_PARAM		0x010	/* For passing a parameter to fixup */
+#define EXC_TABLE_SYSCALL_SAVE	0x014	/* For fast syscall handler */
+#define EXC_TABLE_FAST_USER	0x100	/* Fast user exception handler */
+#define EXC_TABLE_FAST_KERNEL	0x200	/* Fast kernel exception handler */
+#define EXC_TABLE_DEFAULT	0x300	/* Default C-Handler */
+#define EXC_TABLE_SIZE		0x400
+
+/* Registers used by strace */
+
+#define REG_A_BASE	0x0000
+#define REG_AR_BASE	0x0100
+#define REG_PC		0x0020
+#define REG_PS		0x02e6
+#define REG_WB		0x0248
+#define REG_WS		0x0249
+#define REG_LBEG	0x0200
+#define REG_LEND	0x0201
+#define REG_LCOUNT	0x0202
+#define REG_SAR		0x0203
+
+#define SYSCALL_NR	0x00ff
+
+/* Other PTRACE_ values defined in <linux/ptrace.h> using values 0-9,16,17,24 */
+
+#define PTRACE_GETREGS		12
+#define PTRACE_SETREGS		13
+#define PTRACE_GETXTREGS	18
+#define PTRACE_SETXTREGS	19
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+#include <asm/coprocessor.h>
+
+/*
+ * This struct defines the way the registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ */
+struct pt_regs {
+	unsigned long pc;		/*   4 */
+	unsigned long ps;		/*   8 */
+	unsigned long depc;		/*  12 */
+	unsigned long exccause;		/*  16 */
+	unsigned long excvaddr;		/*  20 */
+	unsigned long debugcause;	/*  24 */
+	unsigned long wmask;		/*  28 */
+	unsigned long lbeg;		/*  32 */
+	unsigned long lend;		/*  36 */
+	unsigned long lcount;		/*  40 */
+	unsigned long sar;		/*  44 */
+	unsigned long windowbase;	/*  48 */
+	unsigned long windowstart;	/*  52 */
+	unsigned long syscall;		/*  56 */
+	unsigned long icountlevel;	/*  60 */
+	int reserved[1];		/*  64 */
+
+	/* Additional configurable registers that are used by the compiler. */
+	xtregs_opt_t xtregs_opt;
+
+	/* Make sure the areg field is 16 bytes aligned. */
+	int align[0] __attribute__ ((aligned(16)));
+
+	/* current register frame.
+	 * Note: The ESF for kernel exceptions ends after 16 registers!
+	 */
+	unsigned long areg[16];		/* 128 (64) */
+};
+
+#include <variant/core.h>
+
+# define arch_has_single_step()	(1)
+# define task_pt_regs(tsk) ((struct pt_regs*) \
+  (task_stack_page(tsk) + KERNEL_STACK_SIZE - (XCHAL_NUM_AREGS-16)*4) - 1)
+# define user_mode(regs) (((regs)->ps & 0x00000020)!=0)
+# define instruction_pointer(regs) ((regs)->pc)
+extern void show_regs(struct pt_regs *);
+
+# ifndef CONFIG_SMP
+#  define profile_pc(regs) instruction_pointer(regs)
+# endif
+
+#else	/* __ASSEMBLY__ */
+
+# include <asm/asm-offsets.h>
+#define PT_REGS_OFFSET	  (KERNEL_STACK_SIZE - PT_USER_SIZE)
+
+#endif	/* !__ASSEMBLY__ */
+
+#endif  /* __KERNEL__ */
+
+#endif	/* _XTENSA_PTRACE_H */
diff --git a/arch/xtensa/include/asm/regs.h b/arch/xtensa/include/asm/regs.h
new file mode 100644
index 00000000..d4baed24
--- /dev/null
+++ b/arch/xtensa/include/asm/regs.h
@@ -0,0 +1,145 @@
+/*
+ * Copyright (c) 2006 Tensilica, Inc.  All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2.1 of the GNU Lesser General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * Further, this software is distributed without any warranty that it is
+ * free of the rightful claim of any third person regarding infringement
+ * or the like.  Any license provided herein, whether implied or
+ * otherwise, applies only to this software file.  Patent licenses, if
+ * any, provided herein do not apply to combinations of this program with
+ * other software, or any other product whatsoever.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this program; if not, write the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307,
+ * USA.
+ */
+
+#ifndef _XTENSA_REGS_H
+#define _XTENSA_REGS_H
+
+/*  Special registers.  */
+
+#define LBEG		0
+#define LEND		1
+#define LCOUNT		2
+#define SAR		3
+#define BR		4
+#define SCOMPARE1	12
+#define ACCHI		16
+#define ACCLO		17
+#define MR		32
+#define WINDOWBASE	72
+#define WINDOWSTART	73
+#define PTEVADDR	83
+#define RASID		90
+#define ITLBCFG		91
+#define DTLBCFG		92
+#define IBREAKENABLE	96
+#define DDR		104
+#define IBREAKA		128
+#define DBREAKA		144
+#define DBREAKC		160
+#define EPC		176
+#define EPC_1		177
+#define DEPC		192
+#define EPS		192
+#define EPS_1		193
+#define EXCSAVE		208
+#define EXCSAVE_1	209
+#define INTERRUPT	226
+#define INTENABLE	228
+#define PS		230
+#define THREADPTR	231
+#define EXCCAUSE	232
+#define DEBUGCAUSE	233
+#define CCOUNT		234
+#define PRID		235
+#define ICOUNT		236
+#define ICOUNTLEVEL	237
+#define EXCVADDR	238
+#define CCOMPARE	240
+#define MISC		244
+
+/*  Special names for read-only and write-only interrupt registers.  */
+
+#define INTREAD		226
+#define INTSET		226
+#define INTCLEAR	227
+
+/*  EXCCAUSE register fields  */
+
+#define EXCCAUSE_EXCCAUSE_SHIFT	0
+#define EXCCAUSE_EXCCAUSE_MASK	0x3F
+
+#define EXCCAUSE_ILLEGAL_INSTRUCTION		0
+#define EXCCAUSE_SYSTEM_CALL			1
+#define EXCCAUSE_INSTRUCTION_FETCH_ERROR	2
+#define EXCCAUSE_LOAD_STORE_ERROR		3
+#define EXCCAUSE_LEVEL1_INTERRUPT		4
+#define EXCCAUSE_ALLOCA				5
+#define EXCCAUSE_INTEGER_DIVIDE_BY_ZERO		6
+#define EXCCAUSE_SPECULATION			7
+#define EXCCAUSE_PRIVILEGED			8
+#define EXCCAUSE_UNALIGNED			9
+#define EXCCAUSE_ITLB_MISS			16
+#define EXCCAUSE_ITLB_MULTIHIT			17
+#define EXCCAUSE_ITLB_PRIVILEGE			18
+#define EXCCAUSE_ITLB_SIZE_RESTRICTION		19
+#define EXCCAUSE_FETCH_CACHE_ATTRIBUTE		20
+#define EXCCAUSE_DTLB_MISS			24
+#define EXCCAUSE_DTLB_MULTIHIT			25
+#define EXCCAUSE_DTLB_PRIVILEGE			26
+#define EXCCAUSE_DTLB_SIZE_RESTRICTION		27
+#define EXCCAUSE_LOAD_CACHE_ATTRIBUTE		28
+#define EXCCAUSE_STORE_CACHE_ATTRIBUTE		29
+#define EXCCAUSE_COPROCESSOR0_DISABLED		32
+#define EXCCAUSE_COPROCESSOR1_DISABLED		33
+#define EXCCAUSE_COPROCESSOR2_DISABLED		34
+#define EXCCAUSE_COPROCESSOR3_DISABLED		35
+#define EXCCAUSE_COPROCESSOR4_DISABLED		36
+#define EXCCAUSE_COPROCESSOR5_DISABLED		37
+#define EXCCAUSE_COPROCESSOR6_DISABLED		38
+#define EXCCAUSE_COPROCESSOR7_DISABLED		39
+
+/*  PS register fields.  */
+
+#define PS_WOE_BIT		18
+#define PS_CALLINC_SHIFT	16
+#define PS_CALLINC_MASK		0x00030000
+#define PS_OWB_SHIFT		8
+#define PS_OWB_MASK		0x00000F00
+#define PS_RING_SHIFT		6
+#define PS_RING_MASK		0x000000C0
+#define PS_UM_BIT		5
+#define PS_EXCM_BIT		4
+#define PS_INTLEVEL_SHIFT	0
+#define PS_INTLEVEL_MASK	0x0000000F
+
+/*  DBREAKCn register fields.  */
+
+#define DBREAKC_MASK_BIT		0
+#define DBREAKC_MASK_MASK		0x0000003F
+#define DBREAKC_LOAD_BIT		30
+#define DBREAKC_LOAD_MASK		0x40000000
+#define DBREAKC_STOR_BIT		31
+#define DBREAKC_STOR_MASK		0x80000000
+
+/*  DEBUGCAUSE register fields.  */
+
+#define DEBUGCAUSE_DEBUGINT_BIT		5	/* External debug interrupt */
+#define DEBUGCAUSE_BREAKN_BIT		4	/* BREAK.N instruction */
+#define DEBUGCAUSE_BREAK_BIT		3	/* BREAK instruction */
+#define DEBUGCAUSE_DBREAK_BIT		2	/* DBREAK match */
+#define DEBUGCAUSE_IBREAK_BIT		1	/* IBREAK match */
+#define DEBUGCAUSE_ICOUNT_BIT		0	/* ICOUNT would incr. to zero */
+
+#endif /* _XTENSA_SPECREG_H */
+
diff --git a/arch/xtensa/include/asm/resource.h b/arch/xtensa/include/asm/resource.h
new file mode 100644
index 00000000..17b5ab31
--- /dev/null
+++ b/arch/xtensa/include/asm/resource.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-xtensa/resource.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_RESOURCE_H
+#define _XTENSA_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif	/* _XTENSA_RESOURCE_H */
diff --git a/arch/xtensa/include/asm/rmap.h b/arch/xtensa/include/asm/rmap.h
new file mode 100644
index 00000000..649588b7
--- /dev/null
+++ b/arch/xtensa/include/asm/rmap.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-xtensa/rmap.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_RMAP_H
+#define _XTENSA_RMAP_H
+
+#include <asm-generic/rmap.h>
+
+#endif
diff --git a/arch/xtensa/include/asm/rwsem.h b/arch/xtensa/include/asm/rwsem.h
new file mode 100644
index 00000000..249619e7
--- /dev/null
+++ b/arch/xtensa/include/asm/rwsem.h
@@ -0,0 +1,131 @@
+/*
+ * include/asm-xtensa/rwsem.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Largely copied from include/asm-ppc/rwsem.h
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_RWSEM_H
+#define _XTENSA_RWSEM_H
+
+#ifndef _LINUX_RWSEM_H
+#error "Please don't include <asm/rwsem.h> directly, use <linux/rwsem.h> instead."
+#endif
+
+#define RWSEM_UNLOCKED_VALUE		0x00000000
+#define RWSEM_ACTIVE_BIAS		0x00000001
+#define RWSEM_ACTIVE_MASK		0x0000ffff
+#define RWSEM_WAITING_BIAS		(-0x00010000)
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+
+/*
+ * lock for reading
+ */
+static inline void __down_read(struct rw_semaphore *sem)
+{
+	if (atomic_add_return(1,(atomic_t *)(&sem->count)) > 0)
+		smp_wmb();
+	else
+		rwsem_down_read_failed(sem);
+}
+
+static inline int __down_read_trylock(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	while ((tmp = sem->count) >= 0) {
+		if (tmp == cmpxchg(&sem->count, tmp,
+				   tmp + RWSEM_ACTIVE_READ_BIAS)) {
+			smp_wmb();
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/*
+ * lock for writing
+ */
+static inline void __down_write(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS,
+				(atomic_t *)(&sem->count));
+	if (tmp == RWSEM_ACTIVE_WRITE_BIAS)
+		smp_wmb();
+	else
+		rwsem_down_write_failed(sem);
+}
+
+static inline int __down_write_trylock(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
+		      RWSEM_ACTIVE_WRITE_BIAS);
+	smp_wmb();
+	return tmp == RWSEM_UNLOCKED_VALUE;
+}
+
+/*
+ * unlock after reading
+ */
+static inline void __up_read(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	smp_wmb();
+	tmp = atomic_sub_return(1,(atomic_t *)(&sem->count));
+	if (tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0)
+		rwsem_wake(sem);
+}
+
+/*
+ * unlock after writing
+ */
+static inline void __up_write(struct rw_semaphore *sem)
+{
+	smp_wmb();
+	if (atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS,
+			      (atomic_t *)(&sem->count)) < 0)
+		rwsem_wake(sem);
+}
+
+/*
+ * implement atomic add functionality
+ */
+static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
+{
+	atomic_add(delta, (atomic_t *)(&sem->count));
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void __downgrade_write(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	smp_wmb();
+	tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count));
+	if (tmp < 0)
+		rwsem_downgrade_wake(sem);
+}
+
+/*
+ * implement exchange and add functionality
+ */
+static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
+{
+	smp_mb();
+	return atomic_add_return(delta, (atomic_t *)(&sem->count));
+}
+
+#endif	/* _XTENSA_RWSEM_H */
diff --git a/arch/xtensa/include/asm/scatterlist.h b/arch/xtensa/include/asm/scatterlist.h
new file mode 100644
index 00000000..a0421a61
--- /dev/null
+++ b/arch/xtensa/include/asm/scatterlist.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-xtensa/scatterlist.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_SCATTERLIST_H
+#define _XTENSA_SCATTERLIST_H
+
+#include <asm-generic/scatterlist.h>
+
+#endif	/* _XTENSA_SCATTERLIST_H */
diff --git a/arch/xtensa/include/asm/sections.h b/arch/xtensa/include/asm/sections.h
new file mode 100644
index 00000000..40b5191b
--- /dev/null
+++ b/arch/xtensa/include/asm/sections.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-xtensa/sections.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_SECTIONS_H
+#define _XTENSA_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+#endif	/* _XTENSA_SECTIONS_H */
diff --git a/arch/xtensa/include/asm/segment.h b/arch/xtensa/include/asm/segment.h
new file mode 100644
index 00000000..a2eb547a
--- /dev/null
+++ b/arch/xtensa/include/asm/segment.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-xtensa/segment.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_SEGMENT_H
+#define _XTENSA_SEGMENT_H
+
+#include <asm/uaccess.h>
+
+#endif	/* _XTENSA_SEGEMENT_H */
diff --git a/arch/xtensa/include/asm/sembuf.h b/arch/xtensa/include/asm/sembuf.h
new file mode 100644
index 00000000..c1587049
--- /dev/null
+++ b/arch/xtensa/include/asm/sembuf.h
@@ -0,0 +1,44 @@
+/*
+ * include/asm-xtensa/sembuf.h
+ *
+ * The semid64_ds structure for Xtensa architecture.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ *
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ *
+ */
+
+#ifndef _XTENSA_SEMBUF_H
+#define _XTENSA_SEMBUF_H
+
+#include <asm/byteorder.h>
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+#ifdef __XTENSA_EL__
+	__kernel_time_t	sem_otime;		/* last semop time */
+	unsigned long	__unused1;
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	__unused2;
+#else
+	unsigned long	__unused1;
+	__kernel_time_t	sem_otime;		/* last semop time */
+	unsigned long	__unused2;
+	__kernel_time_t	sem_ctime;		/* last change time */
+#endif
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* __ASM_XTENSA_SEMBUF_H */
diff --git a/arch/xtensa/include/asm/serial.h b/arch/xtensa/include/asm/serial.h
new file mode 100644
index 00000000..a8a24932
--- /dev/null
+++ b/arch/xtensa/include/asm/serial.h
@@ -0,0 +1,18 @@
+/*
+ * include/asm-xtensa/serial.h
+ *
+ * Configuration details for 8250, 16450, 16550, etc. serial ports
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_SERIAL_H
+#define _XTENSA_SERIAL_H
+
+#include <platform/serial.h>
+
+#endif	/* _XTENSA_SERIAL_H */
diff --git a/arch/xtensa/include/asm/setup.h b/arch/xtensa/include/asm/setup.h
new file mode 100644
index 00000000..e3636520
--- /dev/null
+++ b/arch/xtensa/include/asm/setup.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-xtensa/setup.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_SETUP_H
+#define _XTENSA_SETUP_H
+
+#define COMMAND_LINE_SIZE	256
+
+#endif
diff --git a/arch/xtensa/include/asm/shmbuf.h b/arch/xtensa/include/asm/shmbuf.h
new file mode 100644
index 00000000..ad4b0121
--- /dev/null
+++ b/arch/xtensa/include/asm/shmbuf.h
@@ -0,0 +1,71 @@
+/*
+ * include/asm-xtensa/shmbuf.h
+ *
+ * The shmid64_ds structure for Xtensa architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_SHMBUF_H
+#define _XTENSA_SHMBUF_H
+
+#if defined (__XTENSA_EL__)
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	unsigned long		__unused1;
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	unsigned long		__unused2;
+	__kernel_time_t		shm_ctime;	/* last change time */
+	unsigned long		__unused3;
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+#elif defined (__XTENSA_EB__)
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	unsigned long		__unused1;
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	unsigned long		__unused2;
+	__kernel_time_t		shm_ctime;	/* last change time */
+	unsigned long		__unused3;
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+#else
+# error endian order not defined
+#endif
+
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif	/* _XTENSA_SHMBUF_H */
diff --git a/arch/xtensa/include/asm/shmparam.h b/arch/xtensa/include/asm/shmparam.h
new file mode 100644
index 00000000..c8cc16c3
--- /dev/null
+++ b/arch/xtensa/include/asm/shmparam.h
@@ -0,0 +1,21 @@
+/*
+ * include/asm-xtensa/shmparam.h
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of
+ * this archive for more details.
+ */
+
+#ifndef _XTENSA_SHMPARAM_H
+#define _XTENSA_SHMPARAM_H
+
+/*
+ * Xtensa can have variable size caches, and if
+ * the size of single way is larger than the page size,
+ * then we have to start worrying about cache aliasing
+ * problems.
+ */
+
+#define SHMLBA	((PAGE_SIZE > DCACHE_WAY_SIZE)? PAGE_SIZE : DCACHE_WAY_SIZE)
+
+#endif /* _XTENSA_SHMPARAM_H */
diff --git a/arch/xtensa/include/asm/sigcontext.h b/arch/xtensa/include/asm/sigcontext.h
new file mode 100644
index 00000000..03383af8
--- /dev/null
+++ b/arch/xtensa/include/asm/sigcontext.h
@@ -0,0 +1,28 @@
+/*
+ * include/asm-xtensa/sigcontext.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2007 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_SIGCONTEXT_H
+#define _XTENSA_SIGCONTEXT_H
+
+
+struct sigcontext {
+	unsigned long sc_pc;
+	unsigned long sc_ps;
+	unsigned long sc_lbeg;
+	unsigned long sc_lend;
+	unsigned long sc_lcount;
+	unsigned long sc_sar;
+	unsigned long sc_acclo;
+	unsigned long sc_acchi;
+	unsigned long sc_a[16];
+	void *sc_xtregs;
+};
+
+#endif /* _XTENSA_SIGCONTEXT_H */
diff --git a/arch/xtensa/include/asm/siginfo.h b/arch/xtensa/include/asm/siginfo.h
new file mode 100644
index 00000000..69162482
--- /dev/null
+++ b/arch/xtensa/include/asm/siginfo.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-xtensa/siginfo.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_SIGINFO_H
+#define _XTENSA_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif	/* _XTENSA_SIGINFO_H */
diff --git a/arch/xtensa/include/asm/signal.h b/arch/xtensa/include/asm/signal.h
new file mode 100644
index 00000000..633ba73b
--- /dev/null
+++ b/arch/xtensa/include/asm/signal.h
@@ -0,0 +1,172 @@
+/*
+ * include/asm-xtensa/signal.h
+ *
+ * Swiped from SH.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_SIGNAL_H
+#define _XTENSA_SIGNAL_H
+
+
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#endif
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/* #define SIGLOST		29 */
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	(_NSIG-1)
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002 /* not supported yet */
+#define SA_SIGINFO	0x00000004
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+#define SA_RESTORER	0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#ifndef __ASSEMBLY__
+
+#define SIG_BLOCK          0	/* for blocking signals */
+#define SIG_UNBLOCK        1	/* for unblocking signals */
+#define SIG_SETMASK        2	/* for setting the signal mask */
+
+/* Type of a signal handler.  */
+typedef void (*__sighandler_t)(int);
+
+#define SIG_DFL	((__sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__sighandler_t)-1)	/* error return from signal */
+
+#ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+#else
+
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif	/* __KERNEL__ */
+#endif	/* __ASSEMBLY__ */
+#endif	/* _XTENSA_SIGNAL_H */
diff --git a/arch/xtensa/include/asm/smp.h b/arch/xtensa/include/asm/smp.h
new file mode 100644
index 00000000..83c569e3
--- /dev/null
+++ b/arch/xtensa/include/asm/smp.h
@@ -0,0 +1,27 @@
+/*
+ * include/asm-xtensa/smp.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_SMP_H
+#define _XTENSA_SMP_H
+
+extern struct xtensa_cpuinfo boot_cpu_data;
+
+#define cpu_data (&boot_cpu_data)
+#define current_cpu_data boot_cpu_data
+
+struct xtensa_cpuinfo {
+	unsigned long	*pgd_cache;
+	unsigned long	*pte_cache;
+	unsigned long	pgtable_cache_sz;
+};
+
+#define cpu_logical_map(cpu)	(cpu)
+
+#endif	/* _XTENSA_SMP_H */
diff --git a/arch/xtensa/include/asm/socket.h b/arch/xtensa/include/asm/socket.h
new file mode 100644
index 00000000..cbdf2ffa
--- /dev/null
+++ b/arch/xtensa/include/asm/socket.h
@@ -0,0 +1,76 @@
+/*
+ * include/asm-xtensa/socket.h
+ *
+ * Copied from i386.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _XTENSA_SOCKET_H
+#define _XTENSA_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockoptions(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_SNDBUFFORCE	32
+#define SO_RCVBUFFORCE	33
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+#define SO_PEERSEC		31
+#define SO_PASSSEC		34
+#define SO_TIMESTAMPNS		35
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			36
+
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
+#define SO_PROTOCOL		38
+#define SO_DOMAIN		39
+
+#define SO_RXQ_OVFL             40
+
+#endif	/* _XTENSA_SOCKET_H */
diff --git a/arch/xtensa/include/asm/sockios.h b/arch/xtensa/include/asm/sockios.h
new file mode 100644
index 00000000..efe0af37
--- /dev/null
+++ b/arch/xtensa/include/asm/sockios.h
@@ -0,0 +1,31 @@
+/*
+ * include/asm-xtensa/sockios.h
+ *
+ * Socket-level I/O control calls.  Copied from MIPS.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995 by Ralf Baechle
+ * Copyright (C) 2001 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_SOCKIOS_H
+#define _XTENSA_SOCKIOS_H
+
+#include <asm/ioctl.h>
+
+/* Socket-level I/O control calls. */
+
+#define FIOGETOWN	_IOR('f', 123, int)
+#define FIOSETOWN 	_IOW('f', 124, int)
+
+#define SIOCATMARK	_IOR('s', 7, int)
+#define SIOCSPGRP	_IOW('s', 8, pid_t)
+#define SIOCGPGRP	_IOR('s', 9, pid_t)
+
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif	/* _XTENSA_SOCKIOS_H */
diff --git a/arch/xtensa/include/asm/spinlock.h b/arch/xtensa/include/asm/spinlock.h
new file mode 100644
index 00000000..8ff23649
--- /dev/null
+++ b/arch/xtensa/include/asm/spinlock.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-xtensa/spinlock.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_SPINLOCK_H
+#define _XTENSA_SPINLOCK_H
+
+#include <linux/spinlock.h>
+
+#endif	/* _XTENSA_SPINLOCK_H */
diff --git a/arch/xtensa/include/asm/stat.h b/arch/xtensa/include/asm/stat.h
new file mode 100644
index 00000000..c4992038
--- /dev/null
+++ b/arch/xtensa/include/asm/stat.h
@@ -0,0 +1,59 @@
+/*
+ * include/asm-xtensa/stat.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2007 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_STAT_H
+#define _XTENSA_STAT_H
+
+#define STAT_HAVE_NSEC 1
+
+struct stat {
+	unsigned long	st_dev;
+	unsigned long	st_ino;
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+	unsigned long	st_rdev;
+	long		st_size;
+	unsigned long	st_blksize;
+	unsigned long	st_blocks;
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+	unsigned long	__unused4;
+	unsigned long	__unused5;
+};
+
+struct stat64  {
+	unsigned long long st_dev;	/* Device */
+	unsigned long long st_ino;	/* File serial number */
+	unsigned int  st_mode;		/* File mode. */
+	unsigned int  st_nlink;		/* Link count. */
+	unsigned int  st_uid;		/* User ID of the file's owner. */
+	unsigned int  st_gid;		/* Group ID of the file's group. */
+	unsigned long long st_rdev;	/* Device number, if device. */
+	long long st_size;		/* Size of file, in bytes. */
+	unsigned long st_blksize;	/* Optimal block size for I/O. */
+	unsigned long __unused2;
+	unsigned long long st_blocks;	/* Number 512-byte blocks allocated. */
+	unsigned long st_atime;		/* Time of last access. */
+	unsigned long st_atime_nsec;
+	unsigned long st_mtime;		/* Time of last modification. */
+	unsigned long st_mtime_nsec;
+	unsigned long st_ctime;		/* Time of last status change. */
+	unsigned long st_ctime_nsec;
+	unsigned long __unused4;
+	unsigned long __unused5;
+};
+
+#endif	/* _XTENSA_STAT_H */
diff --git a/arch/xtensa/include/asm/statfs.h b/arch/xtensa/include/asm/statfs.h
new file mode 100644
index 00000000..9c3d1a21
--- /dev/null
+++ b/arch/xtensa/include/asm/statfs.h
@@ -0,0 +1,17 @@
+/*
+ * include/asm-xtensa/statfs.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_STATFS_H
+#define _XTENSA_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif	/* _XTENSA_STATFS_H */
+
diff --git a/arch/xtensa/include/asm/string.h b/arch/xtensa/include/asm/string.h
new file mode 100644
index 00000000..5fb8c27c
--- /dev/null
+++ b/arch/xtensa/include/asm/string.h
@@ -0,0 +1,124 @@
+/*
+ * include/asm-xtensa/string.h
+ *
+ * These trivial string functions are considered part of the public domain.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+/* We should optimize these. See arch/xtensa/lib/strncpy_user.S */
+
+#ifndef _XTENSA_STRING_H
+#define _XTENSA_STRING_H
+
+#define __HAVE_ARCH_STRCPY
+static inline char *strcpy(char *__dest, const char *__src)
+{
+	register char *__xdest = __dest;
+	unsigned long __dummy;
+
+	__asm__ __volatile__("1:\n\t"
+		"l8ui	%2, %1, 0\n\t"
+		"s8i	%2, %0, 0\n\t"
+		"addi	%1, %1, 1\n\t"
+		"addi	%0, %0, 1\n\t"
+		"bnez	%2, 1b\n\t"
+		: "=r" (__dest), "=r" (__src), "=&r" (__dummy)
+		: "0" (__dest), "1" (__src)
+		: "memory");
+
+	return __xdest;
+}
+
+#define __HAVE_ARCH_STRNCPY
+static inline char *strncpy(char *__dest, const char *__src, size_t __n)
+{
+	register char *__xdest = __dest;
+	unsigned long __dummy;
+
+	if (__n == 0)
+		return __xdest;
+
+	__asm__ __volatile__(
+		"1:\n\t"
+		"l8ui	%2, %1, 0\n\t"
+		"s8i	%2, %0, 0\n\t"
+		"addi	%1, %1, 1\n\t"
+		"addi	%0, %0, 1\n\t"
+		"beqz	%2, 2f\n\t"
+		"bne	%1, %5, 1b\n"
+		"2:"
+		: "=r" (__dest), "=r" (__src), "=&r" (__dummy)
+		: "0" (__dest), "1" (__src), "r" (__src+__n)
+		: "memory");
+
+	return __xdest;
+}
+
+#define __HAVE_ARCH_STRCMP
+static inline int strcmp(const char *__cs, const char *__ct)
+{
+	register int __res;
+	unsigned long __dummy;
+
+	__asm__ __volatile__(
+		"1:\n\t"
+		"l8ui	%3, %1, 0\n\t"
+		"addi	%1, %1, 1\n\t"
+		"l8ui	%2, %0, 0\n\t"
+		"addi	%0, %0, 1\n\t"
+		"beqz	%2, 2f\n\t"
+		"beq	%2, %3, 1b\n"
+		"2:\n\t"
+		"sub	%2, %3, %2"
+		: "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&r" (__dummy)
+		: "0" (__cs), "1" (__ct));
+
+	return __res;
+}
+
+#define __HAVE_ARCH_STRNCMP
+static inline int strncmp(const char *__cs, const char *__ct, size_t __n)
+{
+	register int __res;
+	unsigned long __dummy;
+
+	__asm__ __volatile__(
+		"mov	%2, %3\n"
+		"1:\n\t"
+		"beq	%0, %6, 2f\n\t"
+		"l8ui	%3, %1, 0\n\t"
+		"addi	%1, %1, 1\n\t"
+		"l8ui	%2, %0, 0\n\t"
+		"addi	%0, %0, 1\n\t"
+		"beqz	%2, 2f\n\t"
+		"beqz	%3, 2f\n\t"
+		"beq	%2, %3, 1b\n"
+		"2:\n\t"
+		"sub	%2, %3, %2"
+		: "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&r" (__dummy)
+		: "0" (__cs), "1" (__ct), "r" (__cs+__n));
+
+	return __res;
+}
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *__s, int __c, size_t __count);
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
+
+#define __HAVE_ARCH_MEMMOVE
+extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
+
+/* Don't build bcopy at all ...  */
+#define __HAVE_ARCH_BCOPY
+
+#define __HAVE_ARCH_MEMSCAN
+#define memscan memchr
+
+#endif	/* _XTENSA_STRING_H */
diff --git a/arch/xtensa/include/asm/swab.h b/arch/xtensa/include/asm/swab.h
new file mode 100644
index 00000000..226a3916
--- /dev/null
+++ b/arch/xtensa/include/asm/swab.h
@@ -0,0 +1,70 @@
+/*
+ * include/asm-xtensa/swab.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_SWAB_H
+#define _XTENSA_SWAB_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+#define __SWAB_64_THRU_32__
+
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
+{
+    __u32 res;
+    /* instruction sequence from Xtensa ISA release 2/2000 */
+    __asm__("ssai     8           \n\t"
+	    "srli     %0, %1, 16  \n\t"
+	    "src      %0, %0, %1  \n\t"
+	    "src      %0, %0, %0  \n\t"
+	    "src      %0, %1, %0  \n"
+	    : "=&a" (res)
+	    : "a" (x)
+	    );
+    return res;
+}
+#define __arch_swab32 __arch_swab32
+
+static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
+{
+    /* Given that 'short' values are signed (i.e., can be negative),
+     * we cannot assume that the upper 16-bits of the register are
+     * zero.  We are careful to mask values after shifting.
+     */
+
+    /* There exists an anomaly between xt-gcc and xt-xcc.  xt-gcc
+     * inserts an extui instruction after putting this function inline
+     * to ensure that it uses only the least-significant 16 bits of
+     * the result.  xt-xcc doesn't use an extui, but assumes the
+     * __asm__ macro follows convention that the upper 16 bits of an
+     * 'unsigned short' result are still zero.  This macro doesn't
+     * follow convention; indeed, it leaves garbage in the upport 16
+     * bits of the register.
+
+     * Declaring the temporary variables 'res' and 'tmp' to be 32-bit
+     * types while the return type of the function is a 16-bit type
+     * forces both compilers to insert exactly one extui instruction
+     * (or equivalent) to mask off the upper 16 bits. */
+
+    __u32 res;
+    __u32 tmp;
+
+    __asm__("extui    %1, %2, 8, 8\n\t"
+	    "slli     %0, %2, 8   \n\t"
+	    "or       %0, %0, %1  \n"
+	    : "=&a" (res), "=&a" (tmp)
+	    : "a" (x)
+	    );
+
+    return res;
+}
+#define __arch_swab16 __arch_swab16
+
+#endif /* _XTENSA_SWAB_H */
diff --git a/arch/xtensa/include/asm/syscall.h b/arch/xtensa/include/asm/syscall.h
new file mode 100644
index 00000000..efcf33b9
--- /dev/null
+++ b/arch/xtensa/include/asm/syscall.h
@@ -0,0 +1,39 @@
+/*
+ * include/asm-xtensa/syscall.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2007 Tensilica Inc.
+ */
+
+struct pt_regs;
+struct sigaction;
+asmlinkage long xtensa_execve(char*, char**, char**, struct pt_regs*);
+asmlinkage long xtensa_clone(unsigned long, unsigned long, struct pt_regs*);
+asmlinkage long xtensa_ptrace(long, long, long, long);
+asmlinkage long xtensa_sigreturn(struct pt_regs*);
+asmlinkage long xtensa_rt_sigreturn(struct pt_regs*);
+asmlinkage long xtensa_sigsuspend(struct pt_regs*);
+asmlinkage long xtensa_rt_sigsuspend(struct pt_regs*);
+asmlinkage long xtensa_sigaction(int, const struct old_sigaction*,
+				 struct old_sigaction*);
+asmlinkage long xtensa_sigaltstack(struct pt_regs *regs);
+asmlinkage long sys_rt_sigaction(int,
+				 const struct sigaction __user *,
+				 struct sigaction __user *,
+				 size_t);
+asmlinkage long xtensa_shmat(int, char __user *, int);
+asmlinkage long xtensa_fadvise64_64(int, int,
+				    unsigned long long, unsigned long long);
+
+/* Should probably move to linux/syscalls.h */
+struct pollfd;
+asmlinkage long sys_pselect6(int n, fd_set __user *inp, fd_set __user *outp,
+	fd_set __user *exp, struct timespec __user *tsp, void __user *sig);
+asmlinkage long sys_ppoll(struct pollfd __user *ufds, unsigned int nfds,
+	struct timespec __user *tsp, const sigset_t __user *sigmask,
+	size_t sigsetsize);
+
+
diff --git a/arch/xtensa/include/asm/system.h b/arch/xtensa/include/asm/system.h
new file mode 100644
index 00000000..1e7e09ab
--- /dev/null
+++ b/arch/xtensa/include/asm/system.h
@@ -0,0 +1,184 @@
+/*
+ * include/asm-xtensa/system.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_SYSTEM_H
+#define _XTENSA_SYSTEM_H
+
+#include <linux/stringify.h>
+#include <linux/irqflags.h>
+
+#include <asm/processor.h>
+
+#define smp_read_barrier_depends() do { } while(0)
+#define read_barrier_depends() do { } while(0)
+
+#define mb()  barrier()
+#define rmb() mb()
+#define wmb() mb()
+
+#ifdef CONFIG_SMP
+#error smp_* not defined
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#endif
+
+#define set_mb(var, value)	do { var = value; mb(); } while (0)
+
+#if !defined (__ASSEMBLY__)
+
+/* * switch_to(n) should switch tasks to task nr n, first
+ * checking that n isn't the current task, in which case it does nothing.
+ */
+extern void *_switch_to(void *last, void *next);
+
+#endif	/* __ASSEMBLY__ */
+
+#define switch_to(prev,next,last)		\
+do {						\
+	(last) = _switch_to(prev, next);	\
+} while(0)
+
+/*
+ * cmpxchg
+ */
+
+static inline unsigned long
+__cmpxchg_u32(volatile int *p, int old, int new)
+{
+  __asm__ __volatile__("rsil    a15, "__stringify(LOCKLEVEL)"\n\t"
+		       "l32i    %0, %1, 0              \n\t"
+		       "bne	%0, %2, 1f             \n\t"
+		       "s32i    %3, %1, 0              \n\t"
+		       "1:                             \n\t"
+		       "wsr     a15, "__stringify(PS)" \n\t"
+		       "rsync                          \n\t"
+		       : "=&a" (old)
+		       : "a" (p), "a" (old), "r" (new)
+		       : "a15", "memory");
+  return old;
+}
+/* This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid cmpxchg(). */
+
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static __inline__ unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
+{
+	switch (size) {
+	case 4:  return __cmpxchg_u32(ptr, old, new);
+	default: __cmpxchg_called_with_bad_pointer();
+		 return old;
+	}
+}
+
+#define cmpxchg(ptr,o,n)						      \
+	({ __typeof__(*(ptr)) _o_ = (o);				      \
+	   __typeof__(*(ptr)) _n_ = (n);				      \
+	   (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,	      \
+	   			        (unsigned long)_n_, sizeof (*(ptr))); \
+	})
+
+#include <asm-generic/cmpxchg-local.h>
+
+static inline unsigned long __cmpxchg_local(volatile void *ptr,
+				      unsigned long old,
+				      unsigned long new, int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32(ptr, old, new);
+	default:
+		return __cmpxchg_local_generic(ptr, old, new, size);
+	}
+
+	return old;
+}
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n)				  	       \
+	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+			(unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+/*
+ * xchg_u32
+ *
+ * Note that a15 is used here because the register allocation
+ * done by the compiler is not guaranteed and a window overflow
+ * may not occur between the rsil and wsr instructions. By using
+ * a15 in the rsil, the machine is guaranteed to be in a state
+ * where no register reference will cause an overflow.
+ */
+
+static inline unsigned long xchg_u32(volatile int * m, unsigned long val)
+{
+  unsigned long tmp;
+  __asm__ __volatile__("rsil    a15, "__stringify(LOCKLEVEL)"\n\t"
+		       "l32i    %0, %1, 0              \n\t"
+		       "s32i    %2, %1, 0              \n\t"
+		       "wsr     a15, "__stringify(PS)" \n\t"
+		       "rsync                          \n\t"
+		       : "=&a" (tmp)
+		       : "a" (m), "a" (val)
+		       : "a15", "memory");
+  return tmp;
+}
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+/*
+ * This only works if the compiler isn't horribly bad at optimizing.
+ * gcc-2.5.8 reportedly can't handle this, but I define that one to
+ * be dead anyway.
+ */
+
+extern void __xchg_called_with_bad_pointer(void);
+
+static __inline__ unsigned long
+__xchg(unsigned long x, volatile void * ptr, int size)
+{
+	switch (size) {
+		case 4:
+			return xchg_u32(ptr, x);
+	}
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+
+extern void set_except_vector(int n, void *addr);
+
+static inline void spill_registers(void)
+{
+	unsigned int a0, ps;
+
+	__asm__ __volatile__ (
+		"movi	a14," __stringify (PS_EXCM_BIT) " | 1\n\t"
+		"mov	a12, a0\n\t"
+		"rsr	a13," __stringify(SAR) "\n\t"
+		"xsr	a14," __stringify(PS) "\n\t"
+		"movi	a0, _spill_registers\n\t"
+		"rsync\n\t"
+		"callx0 a0\n\t"
+		"mov	a0, a12\n\t"
+		"wsr	a13," __stringify(SAR) "\n\t"
+		"wsr	a14," __stringify(PS) "\n\t"
+		:: "a" (&a0), "a" (&ps)
+		: "a2", "a3", "a4", "a7", "a11", "a12", "a13", "a14", "a15", "memory");
+}
+
+#define arch_align_stack(x) (x)
+
+#endif	/* _XTENSA_SYSTEM_H */
diff --git a/arch/xtensa/include/asm/termbits.h b/arch/xtensa/include/asm/termbits.h
new file mode 100644
index 00000000..0d6c8715
--- /dev/null
+++ b/arch/xtensa/include/asm/termbits.h
@@ -0,0 +1,220 @@
+/*
+ * include/asm-xtensa/termbits.h
+ *
+ * Copied from SH.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_TERMBITS_H
+#define _XTENSA_TERMBITS_H
+
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define	   BOTHER 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000		/* input baud rate */
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+#define IBSHIFT	16		/* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+#define EXTPROC	0200000
+
+/* tcflow() and TCXONC use these */
+
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif	/* _XTENSA_TERMBITS_H */
diff --git a/arch/xtensa/include/asm/termios.h b/arch/xtensa/include/asm/termios.h
new file mode 100644
index 00000000..4673f42f
--- /dev/null
+++ b/arch/xtensa/include/asm/termios.h
@@ -0,0 +1,105 @@
+/*
+ * include/asm-xtensa/termios.h
+ *
+ * Copied from SH.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_TERMIOS_H
+#define _XTENSA_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* Modem lines */
+
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+#ifdef __KERNEL__
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+	unsigned short __tmp; \
+	get_user(__tmp,&(termio)->x); \
+	*(unsigned short *) &(termios)->x = __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __KERNEL__ */
+
+#endif	/* _XTENSA_TERMIOS_H */
diff --git a/arch/xtensa/include/asm/thread_info.h b/arch/xtensa/include/asm/thread_info.h
new file mode 100644
index 00000000..7be8accb
--- /dev/null
+++ b/arch/xtensa/include/asm/thread_info.h
@@ -0,0 +1,162 @@
+/*
+ * include/asm-xtensa/thread_info.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_THREAD_INFO_H
+#define _XTENSA_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+# include <asm/processor.h>
+#endif
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants
+ *   must also be changed
+ */
+
+#ifndef __ASSEMBLY__
+
+#if XTENSA_HAVE_COPROCESSORS
+
+typedef struct xtregs_coprocessor {
+	xtregs_cp0_t cp0;
+	xtregs_cp1_t cp1;
+	xtregs_cp2_t cp2;
+	xtregs_cp3_t cp3;
+	xtregs_cp4_t cp4;
+	xtregs_cp5_t cp5;
+	xtregs_cp6_t cp6;
+	xtregs_cp7_t cp7;
+} xtregs_coprocessor_t;
+
+#endif
+
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	unsigned long		status;		/* thread-synchronous flags */
+	__u32			cpu;		/* current CPU */
+	__s32			preempt_count;	/* 0 => preemptable,< 0 => BUG*/
+
+	mm_segment_t		addr_limit;	/* thread address space */
+	struct restart_block    restart_block;
+
+	unsigned long		cpenable;
+
+	/* Allocate storage for extra user states and coprocessor states. */
+#if XTENSA_HAVE_COPROCESSORS
+	xtregs_coprocessor_t	xtregs_cp;
+#endif
+	xtregs_user_t		xtregs_user;
+};
+
+#else /* !__ASSEMBLY__ */
+
+/* offsets into the thread_info struct for assembly code access */
+#define TI_TASK		 0x00000000
+#define TI_EXEC_DOMAIN	 0x00000004
+#define TI_FLAGS	 0x00000008
+#define TI_STATUS	 0x0000000C
+#define TI_CPU		 0x00000010
+#define TI_PRE_COUNT	 0x00000014
+#define TI_ADDR_LIMIT	 0x00000018
+#define TI_RESTART_BLOCK 0x000001C
+
+#endif
+
+#define PREEMPT_ACTIVE		0x10000000
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+
+#ifndef __ASSEMBLY__
+
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
+	.addr_limit	= KERNEL_DS,		\
+	.restart_block = {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+	 __asm__("extui %0,a1,0,13\n\t"
+	         "xor %0, a1, %0" : "=&r" (ti) : );
+	return ti;
+}
+
+#else /* !__ASSEMBLY__ */
+
+/* how to get the thread information struct from ASM */
+#define GET_THREAD_INFO(reg,sp) \
+	extui reg, sp, 0, 13; \
+	xor   reg, sp, reg
+#endif
+
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_SINGLESTEP		3	/* restore singlestep on return to user mode */
+#define TIF_IRET		4	/* return with iret */
+#define TIF_MEMDIE		5	/* is terminating due to OOM killer */
+#define TIF_RESTORE_SIGMASK	6	/* restore signal mask in do_signal() */
+#define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_FREEZE		17	/* is freezing for suspend */
+
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)
+#define _TIF_IRET		(1<<TIF_IRET)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
+#define _TIF_FREEZE		(1<<TIF_FREEZE)
+
+#define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
+#define _TIF_ALLWORK_MASK	0x0000FFFF	/* work to do on any return to u-space */
+
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ */
+#define TS_USEDFPU		0x0001	/* FPU was used by this task this quantum (SMP) */
+
+#define THREAD_SIZE 8192	//(2*PAGE_SIZE)
+#define THREAD_SIZE_ORDER 1
+
+#endif	/* __KERNEL__ */
+#endif	/* _XTENSA_THREAD_INFO */
diff --git a/arch/xtensa/include/asm/timex.h b/arch/xtensa/include/asm/timex.h
new file mode 100644
index 00000000..053bc427
--- /dev/null
+++ b/arch/xtensa/include/asm/timex.h
@@ -0,0 +1,96 @@
+/*
+ * include/asm-xtensa/timex.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_TIMEX_H
+#define _XTENSA_TIMEX_H
+
+#ifdef __KERNEL__
+
+#include <asm/processor.h>
+#include <linux/stringify.h>
+
+#define _INTLEVEL(x)	XCHAL_INT ## x ## _LEVEL
+#define INTLEVEL(x)	_INTLEVEL(x)
+
+#if INTLEVEL(XCHAL_TIMER0_INTERRUPT) == 1
+# define LINUX_TIMER     0
+# define LINUX_TIMER_INT XCHAL_TIMER0_INTERRUPT
+#elif INTLEVEL(XCHAL_TIMER1_INTERRUPT) == 1
+# define LINUX_TIMER     1
+# define LINUX_TIMER_INT XCHAL_TIMER1_INTERRUPT
+#elif INTLEVEL(XCHAL_TIMER2_INTERRUPT) == 1
+# define LINUX_TIMER     2
+# define LINUX_TIMER_INT XCHAL_TIMER2_INTERRUPT
+#else
+# error "Bad timer number for Linux configurations!"
+#endif
+
+#define LINUX_TIMER_MASK        (1L << LINUX_TIMER_INT)
+
+#define CLOCK_TICK_RATE 	1193180	/* (everyone is using this value) */
+#define CLOCK_TICK_FACTOR       20 /* Factor of both 10^6 and CLOCK_TICK_RATE */
+
+#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
+extern unsigned long ccount_per_jiffy;
+extern unsigned long nsec_per_ccount;
+#define CCOUNT_PER_JIFFY ccount_per_jiffy
+#define NSEC_PER_CCOUNT  nsec_per_ccount
+#else
+#define CCOUNT_PER_JIFFY (CONFIG_XTENSA_CPU_CLOCK*(1000000UL/HZ))
+#define NSEC_PER_CCOUNT (1000UL / CONFIG_XTENSA_CPU_CLOCK)
+#endif
+
+
+typedef unsigned long long cycles_t;
+
+/*
+ * Only used for SMP.
+ */
+
+extern cycles_t cacheflush_time;
+
+#define get_cycles()	(0)
+
+
+/*
+ * Register access.
+ */
+
+#define WSR_CCOUNT(r)	  asm volatile ("wsr %0,"__stringify(CCOUNT) :: "a" (r))
+#define RSR_CCOUNT(r)	  asm volatile ("rsr %0,"__stringify(CCOUNT) : "=a" (r))
+#define WSR_CCOMPARE(x,r) asm volatile ("wsr %0,"__stringify(CCOMPARE)"+"__stringify(x) :: "a"(r))
+#define RSR_CCOMPARE(x,r) asm volatile ("rsr %0,"__stringify(CCOMPARE)"+"__stringify(x) : "=a"(r))
+
+static inline unsigned long get_ccount (void)
+{
+	unsigned long ccount;
+	RSR_CCOUNT(ccount);
+	return ccount;
+}
+
+static inline void set_ccount (unsigned long ccount)
+{
+	WSR_CCOUNT(ccount);
+}
+
+static inline unsigned long get_linux_timer (void)
+{
+	unsigned ccompare;
+	RSR_CCOMPARE(LINUX_TIMER, ccompare);
+	return ccompare;
+}
+
+static inline void set_linux_timer (unsigned long ccompare)
+{
+	WSR_CCOMPARE(LINUX_TIMER, ccompare);
+}
+
+#endif	/* __KERNEL__ */
+#endif	/* _XTENSA_TIMEX_H */
diff --git a/arch/xtensa/include/asm/tlb.h b/arch/xtensa/include/asm/tlb.h
new file mode 100644
index 00000000..0d766f9c
--- /dev/null
+++ b/arch/xtensa/include/asm/tlb.h
@@ -0,0 +1,47 @@
+/*
+ * include/asm-xtensa/tlb.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_TLB_H
+#define _XTENSA_TLB_H
+
+#include <asm/cache.h>
+#include <asm/page.h>
+
+#if (DCACHE_WAY_SIZE <= PAGE_SIZE)
+
+/* Note, read http://lkml.org/lkml/2004/1/15/6 */
+
+# define tlb_start_vma(tlb,vma)			do { } while (0)
+# define tlb_end_vma(tlb,vma)			do { } while (0)
+
+#else
+
+# define tlb_start_vma(tlb, vma)					      \
+	do {								      \
+		if (!tlb->fullmm)					      \
+			flush_cache_range(vma, vma->vm_start, vma->vm_end);   \
+	} while(0)
+
+# define tlb_end_vma(tlb, vma)						      \
+	do {								      \
+		if (!tlb->fullmm)					      \
+			flush_tlb_range(vma, vma->vm_start, vma->vm_end);     \
+	} while(0)
+
+#endif
+
+#define __tlb_remove_tlb_entry(tlb,pte,addr)	do { } while (0)
+#define tlb_flush(tlb)				flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#define __pte_free_tlb(tlb, pte, address)	pte_free((tlb)->mm, pte)
+
+#endif	/* _XTENSA_TLB_H */
diff --git a/arch/xtensa/include/asm/tlbflush.h b/arch/xtensa/include/asm/tlbflush.h
new file mode 100644
index 00000000..46d24007
--- /dev/null
+++ b/arch/xtensa/include/asm/tlbflush.h
@@ -0,0 +1,191 @@
+/*
+ * include/asm-xtensa/tlbflush.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_TLBFLUSH_H
+#define _XTENSA_TLBFLUSH_H
+
+#ifdef __KERNEL__
+
+#include <linux/stringify.h>
+#include <asm/processor.h>
+
+#define DTLB_WAY_PGD	7
+
+#define ITLB_ARF_WAYS	4
+#define DTLB_ARF_WAYS	4
+
+#define ITLB_HIT_BIT	3
+#define DTLB_HIT_BIT	4
+
+#ifndef __ASSEMBLY__
+
+/* TLB flushing:
+ *
+ *  - flush_tlb_all() flushes all processes TLB entries
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB entries
+ *  - flush_tlb_page(mm, vmaddr) flushes a single page
+ *  - flush_tlb_range(mm, start, end) flushes a range of pages
+ */
+
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct*);
+extern void flush_tlb_page(struct vm_area_struct*,unsigned long);
+extern void flush_tlb_range(struct vm_area_struct*,unsigned long,unsigned long);
+
+#define flush_tlb_kernel_range(start,end) flush_tlb_all()
+
+/* TLB operations. */
+
+static inline unsigned long itlb_probe(unsigned long addr)
+{
+	unsigned long tmp;
+	__asm__ __volatile__("pitlb  %0, %1\n\t" : "=a" (tmp) : "a" (addr));
+	return tmp;
+}
+
+static inline unsigned long dtlb_probe(unsigned long addr)
+{
+	unsigned long tmp;
+	__asm__ __volatile__("pdtlb  %0, %1\n\t" : "=a" (tmp) : "a" (addr));
+	return tmp;
+}
+
+static inline void invalidate_itlb_entry (unsigned long probe)
+{
+	__asm__ __volatile__("iitlb  %0; isync\n\t" : : "a" (probe));
+}
+
+static inline void invalidate_dtlb_entry (unsigned long probe)
+{
+	__asm__ __volatile__("idtlb  %0; dsync\n\t" : : "a" (probe));
+}
+
+/* Use the .._no_isync functions with caution.  Generally, these are
+ * handy for bulk invalidates followed by a single 'isync'.  The
+ * caller must follow up with an 'isync', which can be relatively
+ * expensive on some Xtensa implementations.
+ */
+static inline void invalidate_itlb_entry_no_isync (unsigned entry)
+{
+	/* Caller must follow up with 'isync'. */
+	__asm__ __volatile__ ("iitlb  %0\n" : : "a" (entry) );
+}
+
+static inline void invalidate_dtlb_entry_no_isync (unsigned entry)
+{
+	/* Caller must follow up with 'isync'. */
+	__asm__ __volatile__ ("idtlb  %0\n" : : "a" (entry) );
+}
+
+static inline void set_itlbcfg_register (unsigned long val)
+{
+	__asm__ __volatile__("wsr  %0, "__stringify(ITLBCFG)"\n\t" "isync\n\t"
+			     : : "a" (val));
+}
+
+static inline void set_dtlbcfg_register (unsigned long val)
+{
+	__asm__ __volatile__("wsr  %0, "__stringify(DTLBCFG)"; dsync\n\t"
+	    		     : : "a" (val));
+}
+
+static inline void set_ptevaddr_register (unsigned long val)
+{
+	__asm__ __volatile__(" wsr  %0, "__stringify(PTEVADDR)"; isync\n"
+			     : : "a" (val));
+}
+
+static inline unsigned long read_ptevaddr_register (void)
+{
+	unsigned long tmp;
+	__asm__ __volatile__("rsr  %0, "__stringify(PTEVADDR)"\n\t" : "=a" (tmp));
+	return tmp;
+}
+
+static inline void write_dtlb_entry (pte_t entry, int way)
+{
+	__asm__ __volatile__("wdtlb  %1, %0; dsync\n\t"
+			     : : "r" (way), "r" (entry) );
+}
+
+static inline void write_itlb_entry (pte_t entry, int way)
+{
+	__asm__ __volatile__("witlb  %1, %0; isync\n\t"
+	                     : : "r" (way), "r" (entry) );
+}
+
+static inline void invalidate_page_directory (void)
+{
+	invalidate_dtlb_entry (DTLB_WAY_PGD);
+	invalidate_dtlb_entry (DTLB_WAY_PGD+1);
+	invalidate_dtlb_entry (DTLB_WAY_PGD+2);
+}
+
+static inline void invalidate_itlb_mapping (unsigned address)
+{
+	unsigned long tlb_entry;
+	if (((tlb_entry = itlb_probe(address)) & (1 << ITLB_HIT_BIT)) != 0)
+		invalidate_itlb_entry(tlb_entry);
+}
+
+static inline void invalidate_dtlb_mapping (unsigned address)
+{
+	unsigned long tlb_entry;
+	if (((tlb_entry = dtlb_probe(address)) & (1 << DTLB_HIT_BIT)) != 0)
+		invalidate_dtlb_entry(tlb_entry);
+}
+
+#define check_pgt_cache()	do { } while (0)
+
+
+/*
+ * DO NOT USE THESE FUNCTIONS.  These instructions aren't part of the Xtensa
+ * ISA and exist only for test purposes..
+ * You may find it helpful for MMU debugging, however.
+ *
+ * 'at' is the unmodified input register
+ * 'as' is the output register, as follows (specific to the Linux config):
+ *
+ *      as[31..12] contain the virtual address
+ *      as[11..08] are meaningless
+ *      as[07..00] contain the asid
+ */
+
+static inline unsigned long read_dtlb_virtual (int way)
+{
+	unsigned long tmp;
+	__asm__ __volatile__("rdtlb0  %0, %1\n\t" : "=a" (tmp), "+a" (way));
+	return tmp;
+}
+
+static inline unsigned long read_dtlb_translation (int way)
+{
+	unsigned long tmp;
+	__asm__ __volatile__("rdtlb1  %0, %1\n\t" : "=a" (tmp), "+a" (way));
+	return tmp;
+}
+
+static inline unsigned long read_itlb_virtual (int way)
+{
+	unsigned long tmp;
+	__asm__ __volatile__("ritlb0  %0, %1\n\t" : "=a" (tmp), "+a" (way));
+	return tmp;
+}
+
+static inline unsigned long read_itlb_translation (int way)
+{
+	unsigned long tmp;
+	__asm__ __volatile__("ritlb1  %0, %1\n\t" : "=a" (tmp), "+a" (way));
+	return tmp;
+}
+
+#endif	/* __ASSEMBLY__ */
+#endif	/* __KERNEL__ */
+#endif	/* _XTENSA_TLBFLUSH_H */
diff --git a/arch/xtensa/include/asm/topology.h b/arch/xtensa/include/asm/topology.h
new file mode 100644
index 00000000..7309e38a
--- /dev/null
+++ b/arch/xtensa/include/asm/topology.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-xtensa/topology.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_TOPOLOGY_H
+#define _XTENSA_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif	/* _XTENSA_TOPOLOGY_H */
diff --git a/arch/xtensa/include/asm/types.h b/arch/xtensa/include/asm/types.h
new file mode 100644
index 00000000..b1c981e3
--- /dev/null
+++ b/arch/xtensa/include/asm/types.h
@@ -0,0 +1,38 @@
+/*
+ * include/asm-xtensa/types.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_TYPES_H
+#define _XTENSA_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+#ifdef __ASSEMBLY__
+# define __XTENSA_UL(x)		(x)
+# define __XTENSA_UL_CONST(x)	x
+#else
+# define __XTENSA_UL(x)		((unsigned long)(x))
+# define __XTENSA_UL_CONST(x)	x##UL
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#endif	/* __KERNEL__ */
+#endif
+
+#endif	/* _XTENSA_TYPES_H */
diff --git a/arch/xtensa/include/asm/uaccess.h b/arch/xtensa/include/asm/uaccess.h
new file mode 100644
index 00000000..5b0c18c1
--- /dev/null
+++ b/arch/xtensa/include/asm/uaccess.h
@@ -0,0 +1,500 @@
+/*
+ * include/asm-xtensa/uaccess.h
+ *
+ * User space memory access functions
+ *
+ * These routines provide basic accessing functions to the user memory
+ * space for the kernel. This header file provides functions such as:
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_UACCESS_H
+#define _XTENSA_UACCESS_H
+
+#include <linux/errno.h>
+
+#define VERIFY_READ    0
+#define VERIFY_WRITE   1
+
+#ifdef __ASSEMBLY__
+
+#include <asm/current.h>
+#include <asm/asm-offsets.h>
+#include <asm/processor.h>
+#include <asm/types.h>
+
+/*
+ * These assembly macros mirror the C macros that follow below.  They
+ * should always have identical functionality.  See
+ * arch/xtensa/kernel/sys.S for usage.
+ */
+
+#define KERNEL_DS	0
+#define USER_DS		1
+
+#define get_ds		(KERNEL_DS)
+
+/*
+ * get_fs reads current->thread.current_ds into a register.
+ * On Entry:
+ * 	<ad>	anything
+ * 	<sp>	stack
+ * On Exit:
+ * 	<ad>	contains current->thread.current_ds
+ */
+	.macro	get_fs	ad, sp
+	GET_CURRENT(\ad,\sp)
+	l32i	\ad, \ad, THREAD_CURRENT_DS
+	.endm
+
+/*
+ * set_fs sets current->thread.current_ds to some value.
+ * On Entry:
+ *	<at>	anything (temp register)
+ *	<av>	value to write
+ *	<sp>	stack
+ * On Exit:
+ *	<at>	destroyed (actually, current)
+ *	<av>	preserved, value to write
+ */
+	.macro	set_fs	at, av, sp
+	GET_CURRENT(\at,\sp)
+	s32i	\av, \at, THREAD_CURRENT_DS
+	.endm
+
+/*
+ * kernel_ok determines whether we should bypass addr/size checking.
+ * See the equivalent C-macro version below for clarity.
+ * On success, kernel_ok branches to a label indicated by parameter
+ * <success>.  This implies that the macro falls through to the next
+ * insruction on an error.
+ *
+ * Note that while this macro can be used independently, we designed
+ * in for optimal use in the access_ok macro below (i.e., we fall
+ * through on error).
+ *
+ * On Entry:
+ * 	<at>		anything (temp register)
+ * 	<success>	label to branch to on success; implies
+ * 			fall-through macro on error
+ * 	<sp>		stack pointer
+ * On Exit:
+ * 	<at>		destroyed (actually, current->thread.current_ds)
+ */
+
+#if ((KERNEL_DS != 0) || (USER_DS == 0))
+# error Assembly macro kernel_ok fails
+#endif
+	.macro	kernel_ok  at, sp, success
+	get_fs	\at, \sp
+	beqz	\at, \success
+	.endm
+
+/*
+ * user_ok determines whether the access to user-space memory is allowed.
+ * See the equivalent C-macro version below for clarity.
+ *
+ * On error, user_ok branches to a label indicated by parameter
+ * <error>.  This implies that the macro falls through to the next
+ * instruction on success.
+ *
+ * Note that while this macro can be used independently, we designed
+ * in for optimal use in the access_ok macro below (i.e., we fall
+ * through on success).
+ *
+ * On Entry:
+ * 	<aa>	register containing memory address
+ * 	<as>	register containing memory size
+ * 	<at>	temp register
+ * 	<error>	label to branch to on error; implies fall-through
+ * 		macro on success
+ * On Exit:
+ * 	<aa>	preserved
+ * 	<as>	preserved
+ * 	<at>	destroyed (actually, (TASK_SIZE + 1 - size))
+ */
+	.macro	user_ok	aa, as, at, error
+	movi	\at, __XTENSA_UL_CONST(TASK_SIZE)
+	bgeu	\as, \at, \error
+	sub	\at, \at, \as
+	bgeu	\aa, \at, \error
+	.endm
+
+/*
+ * access_ok determines whether a memory access is allowed.  See the
+ * equivalent C-macro version below for clarity.
+ *
+ * On error, access_ok branches to a label indicated by parameter
+ * <error>.  This implies that the macro falls through to the next
+ * instruction on success.
+ *
+ * Note that we assume success is the common case, and we optimize the
+ * branch fall-through case on success.
+ *
+ * On Entry:
+ * 	<aa>	register containing memory address
+ * 	<as>	register containing memory size
+ * 	<at>	temp register
+ * 	<sp>
+ * 	<error>	label to branch to on error; implies fall-through
+ * 		macro on success
+ * On Exit:
+ * 	<aa>	preserved
+ * 	<as>	preserved
+ * 	<at>	destroyed
+ */
+	.macro	access_ok  aa, as, at, sp, error
+	kernel_ok  \at, \sp, .Laccess_ok_\@
+	user_ok    \aa, \as, \at, \error
+.Laccess_ok_\@:
+	.endm
+
+#else /* __ASSEMBLY__ not defined */
+
+#include <linux/sched.h>
+#include <asm/types.h>
+
+/*
+ * The fs value determines whether argument validity checking should
+ * be performed or not.  If get_fs() == USER_DS, checking is
+ * performed, with get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons (Data Segment Register?), these macros are
+ * grossly misnamed.
+ */
+
+#define KERNEL_DS	((mm_segment_t) { 0 })
+#define USER_DS		((mm_segment_t) { 1 })
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current->thread.current_ds)
+#define set_fs(val)	(current->thread.current_ds = (val))
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS))
+#define __user_ok(addr,size) (((size) <= TASK_SIZE)&&((addr) <= TASK_SIZE-(size)))
+#define __access_ok(addr,size) (__kernel_ok || __user_ok((addr),(size)))
+#define access_ok(type,addr,size) __access_ok((unsigned long)(addr),(size))
+
+/*
+ * These are the main single-value transfer routines.  They
+ * automatically use the right size if we just have the right pointer
+ * type.
+ *
+ * This gets kind of ugly. We want to return _two_ values in
+ * "get_user()" and yet we don't want to do any pointers, because that
+ * is too much of a performance impact. Thus we have a few rather ugly
+ * macros here, and hide all the uglyness from the user.
+ *
+ * Careful to not
+ * (a) re-use the arguments for side effects (sizeof is ok)
+ * (b) require any knowledge of processes at this stage
+ */
+#define put_user(x,ptr)	__put_user_check((x),(ptr),sizeof(*(ptr)))
+#define get_user(x,ptr) __get_user_check((x),(ptr),sizeof(*(ptr)))
+
+/*
+ * The "__xxx" versions of the user access functions are versions that
+ * do not verify the address space, that must have been done previously
+ * with a separate "access_ok()" call (this is used when we do multiple
+ * accesses to the same area of user memory).
+ */
+#define __put_user(x,ptr) __put_user_nocheck((x),(ptr),sizeof(*(ptr)))
+#define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
+
+
+extern long __put_user_bad(void);
+
+#define __put_user_nocheck(x,ptr,size)			\
+({							\
+	long __pu_err;					\
+	__put_user_size((x),(ptr),(size),__pu_err);	\
+	__pu_err;					\
+})
+
+#define __put_user_check(x,ptr,size)				\
+({								\
+	long __pu_err = -EFAULT;				\
+	__typeof__(*(ptr)) *__pu_addr = (ptr);			\
+	if (access_ok(VERIFY_WRITE,__pu_addr,size))		\
+		__put_user_size((x),__pu_addr,(size),__pu_err);	\
+	__pu_err;						\
+})
+
+#define __put_user_size(x,ptr,size,retval)				\
+do {									\
+	int __cb;							\
+	retval = 0;							\
+	switch (size) {							\
+        case 1: __put_user_asm(x,ptr,retval,1,"s8i",__cb);  break;	\
+        case 2: __put_user_asm(x,ptr,retval,2,"s16i",__cb); break;	\
+        case 4: __put_user_asm(x,ptr,retval,4,"s32i",__cb); break;	\
+        case 8: {							\
+		     __typeof__(*ptr) __v64 = x;			\
+		     retval = __copy_to_user(ptr,&__v64,8);		\
+		     break;						\
+	        }							\
+	default: __put_user_bad();					\
+	}								\
+} while (0)
+
+
+/*
+ * Consider a case of a user single load/store would cause both an
+ * unaligned exception and an MMU-related exception (unaligned
+ * exceptions happen first):
+ *
+ * User code passes a bad variable ptr to a system call.
+ * Kernel tries to access the variable.
+ * Unaligned exception occurs.
+ * Unaligned exception handler tries to make aligned accesses.
+ * Double exception occurs for MMU-related cause (e.g., page not mapped).
+ * do_page_fault() thinks the fault address belongs to the kernel, not the
+ * user, and panics.
+ *
+ * The kernel currently prohibits user unaligned accesses.  We use the
+ * __check_align_* macros to check for unaligned addresses before
+ * accessing user space so we don't crash the kernel.  Both
+ * __put_user_asm and __get_user_asm use these alignment macros, so
+ * macro-specific labels such as 0f, 1f, %0, %2, and %3 must stay in
+ * sync.
+ */
+
+#define __check_align_1  ""
+
+#define __check_align_2				\
+	"   _bbci.l %3,  0, 1f		\n"	\
+	"   movi    %0, %4		\n"	\
+	"   _j      2f			\n"
+
+#define __check_align_4				\
+	"   _bbsi.l %3,  0, 0f		\n"	\
+	"   _bbci.l %3,  1, 1f		\n"	\
+	"0: movi    %0, %4		\n"	\
+	"   _j      2f			\n"
+
+
+/*
+ * We don't tell gcc that we are accessing memory, but this is OK
+ * because we do not write to any memory gcc knows about, so there
+ * are no aliasing issues.
+ *
+ * WARNING: If you modify this macro at all, verify that the
+ * __check_align_* macros still work.
+ */
+#define __put_user_asm(x, addr, err, align, insn, cb)	\
+   __asm__ __volatile__(				\
+	__check_align_##align				\
+	"1: "insn"  %2, %3, 0		\n"		\
+	"2:				\n"		\
+	"   .section  .fixup,\"ax\"	\n"		\
+	"   .align 4			\n"		\
+	"4:				\n"		\
+	"   .long  2b			\n"		\
+	"5:				\n"		\
+	"   l32r   %1, 4b		\n"		\
+        "   movi   %0, %4		\n"		\
+        "   jx     %1			\n"		\
+	"   .previous			\n"		\
+	"   .section  __ex_table,\"a\"	\n"		\
+	"   .long	1b, 5b		\n"		\
+	"   .previous"					\
+	:"=r" (err), "=r" (cb)				\
+	:"r" ((int)(x)), "r" (addr), "i" (-EFAULT), "0" (err))
+
+#define __get_user_nocheck(x,ptr,size)				\
+({								\
+	long __gu_err, __gu_val;				\
+	__get_user_size(__gu_val,(ptr),(size),__gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;			\
+	__gu_err;						\
+})
+
+#define __get_user_check(x,ptr,size)					\
+({									\
+	long __gu_err = -EFAULT, __gu_val = 0;				\
+	const __typeof__(*(ptr)) *__gu_addr = (ptr);			\
+	if (access_ok(VERIFY_READ,__gu_addr,size))			\
+		__get_user_size(__gu_val,__gu_addr,(size),__gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;				\
+	__gu_err;							\
+})
+
+extern long __get_user_bad(void);
+
+#define __get_user_size(x,ptr,size,retval)				\
+do {									\
+	int __cb;							\
+	retval = 0;							\
+        switch (size) {							\
+          case 1: __get_user_asm(x,ptr,retval,1,"l8ui",__cb);  break;	\
+          case 2: __get_user_asm(x,ptr,retval,2,"l16ui",__cb); break;	\
+          case 4: __get_user_asm(x,ptr,retval,4,"l32i",__cb);  break;	\
+          case 8: retval = __copy_from_user(&x,ptr,8);    break;	\
+          default: (x) = __get_user_bad();				\
+        }								\
+} while (0)
+
+
+/*
+ * WARNING: If you modify this macro at all, verify that the
+ * __check_align_* macros still work.
+ */
+#define __get_user_asm(x, addr, err, align, insn, cb) \
+   __asm__ __volatile__(			\
+	__check_align_##align			\
+	"1: "insn"  %2, %3, 0		\n"	\
+	"2:				\n"	\
+	"   .section  .fixup,\"ax\"	\n"	\
+	"   .align 4			\n"	\
+	"4:				\n"	\
+	"   .long  2b			\n"	\
+	"5:				\n"	\
+	"   l32r   %1, 4b		\n"	\
+	"   movi   %2, 0		\n"	\
+        "   movi   %0, %4		\n"	\
+        "   jx     %1			\n"	\
+	"   .previous			\n"	\
+	"   .section  __ex_table,\"a\"	\n"	\
+	"   .long	1b, 5b		\n"	\
+	"   .previous"				\
+	:"=r" (err), "=r" (cb), "=r" (x)	\
+	:"r" (addr), "i" (-EFAULT), "0" (err))
+
+
+/*
+ * Copy to/from user space
+ */
+
+/*
+ * We use a generic, arbitrary-sized copy subroutine.  The Xtensa
+ * architecture would cause heavy code bloat if we tried to inline
+ * these functions and provide __constant_copy_* equivalents like the
+ * i386 versions.  __xtensa_copy_user is quite efficient.  See the
+ * .fixup section of __xtensa_copy_user for a discussion on the
+ * X_zeroing equivalents for Xtensa.
+ */
+
+extern unsigned __xtensa_copy_user(void *to, const void *from, unsigned n);
+#define __copy_user(to,from,size) __xtensa_copy_user(to,from,size)
+
+
+static inline unsigned long
+__generic_copy_from_user_nocheck(void *to, const void *from, unsigned long n)
+{
+	return __copy_user(to,from,n);
+}
+
+static inline unsigned long
+__generic_copy_to_user_nocheck(void *to, const void *from, unsigned long n)
+{
+	return __copy_user(to,from,n);
+}
+
+static inline unsigned long
+__generic_copy_to_user(void *to, const void *from, unsigned long n)
+{
+	prefetch(from);
+	if (access_ok(VERIFY_WRITE, to, n))
+		return __copy_user(to,from,n);
+	return n;
+}
+
+static inline unsigned long
+__generic_copy_from_user(void *to, const void *from, unsigned long n)
+{
+	prefetchw(to);
+	if (access_ok(VERIFY_READ, from, n))
+		return __copy_user(to,from,n);
+	else
+		memset(to, 0, n);
+	return n;
+}
+
+#define copy_to_user(to,from,n) __generic_copy_to_user((to),(from),(n))
+#define copy_from_user(to,from,n) __generic_copy_from_user((to),(from),(n))
+#define __copy_to_user(to,from,n) __generic_copy_to_user_nocheck((to),(from),(n))
+#define __copy_from_user(to,from,n) __generic_copy_from_user_nocheck((to),(from),(n))
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+
+/*
+ * We need to return the number of bytes not cleared.  Our memset()
+ * returns zero if a problem occurs while accessing user-space memory.
+ * In that event, return no memory cleared.  Otherwise, zero for
+ * success.
+ */
+
+static inline unsigned long
+__xtensa_clear_user(void *addr, unsigned long size)
+{
+	if ( ! memset(addr, 0, size) )
+		return size;
+	return 0;
+}
+
+static inline unsigned long
+clear_user(void *addr, unsigned long size)
+{
+	if (access_ok(VERIFY_WRITE, addr, size))
+		return __xtensa_clear_user(addr, size);
+	return size ? -EFAULT : 0;
+}
+
+#define __clear_user  __xtensa_clear_user
+
+
+extern long __strncpy_user(char *, const char *, long);
+#define __strncpy_from_user __strncpy_user
+
+static inline long
+strncpy_from_user(char *dst, const char *src, long count)
+{
+	if (access_ok(VERIFY_READ, src, 1))
+		return __strncpy_from_user(dst, src, count);
+	return -EFAULT;
+}
+
+
+#define strlen_user(str) strnlen_user((str), TASK_SIZE - 1)
+
+/*
+ * Return the size of a string (including the ending 0!)
+ */
+extern long __strnlen_user(const char *, long);
+
+static inline long strnlen_user(const char *str, long len)
+{
+	unsigned long top = __kernel_ok ? ~0UL : TASK_SIZE - 1;
+
+	if ((unsigned long)str > top)
+		return 0;
+	return __strnlen_user(str, len);
+}
+
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup.unit otherwise.  */
+
+extern unsigned long search_exception_table(unsigned long addr);
+extern void sort_exception_table(void);
+
+/* Returns the new pc */
+#define fixup_exception(map_reg, fixup_unit, pc)                \
+({                                                              \
+	fixup_unit;                                             \
+})
+
+#endif	/* __ASSEMBLY__ */
+#endif	/* _XTENSA_UACCESS_H */
diff --git a/arch/xtensa/include/asm/ucontext.h b/arch/xtensa/include/asm/ucontext.h
new file mode 100644
index 00000000..94c94ed3
--- /dev/null
+++ b/arch/xtensa/include/asm/ucontext.h
@@ -0,0 +1,22 @@
+/*
+ * include/asm-xtensa/ucontext.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_UCONTEXT_H
+#define _XTENSA_UCONTEXT_H
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* _XTENSA_UCONTEXT_H */
diff --git a/arch/xtensa/include/asm/unaligned.h b/arch/xtensa/include/asm/unaligned.h
new file mode 100644
index 00000000..8e7ed046
--- /dev/null
+++ b/arch/xtensa/include/asm/unaligned.h
@@ -0,0 +1,29 @@
+/*
+ * Xtensa doesn't handle unaligned accesses efficiently.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+#ifndef _ASM_XTENSA_UNALIGNED_H
+#define _ASM_XTENSA_UNALIGNED_H
+
+#include <asm/byteorder.h>
+
+#ifdef __LITTLE_ENDIAN
+# include <linux/unaligned/le_struct.h>
+# include <linux/unaligned/be_byteshift.h>
+# include <linux/unaligned/generic.h>
+# define get_unaligned	__get_unaligned_le
+# define put_unaligned	__put_unaligned_le
+#else
+# include <linux/unaligned/be_struct.h>
+# include <linux/unaligned/le_byteshift.h>
+# include <linux/unaligned/generic.h>
+# define get_unaligned	__get_unaligned_be
+# define put_unaligned	__put_unaligned_be
+#endif
+
+#endif	/* _ASM_XTENSA_UNALIGNED_H */
diff --git a/arch/xtensa/include/asm/unistd.h b/arch/xtensa/include/asm/unistd.h
new file mode 100644
index 00000000..a6f934f3
--- /dev/null
+++ b/arch/xtensa/include/asm/unistd.h
@@ -0,0 +1,739 @@
+/*
+ * include/asm-xtensa/unistd.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_UNISTD_H
+#define _XTENSA_UNISTD_H
+
+#ifndef __SYSCALL
+# define __SYSCALL(nr,func,nargs)
+#endif
+
+#define __NR_spill				  0
+__SYSCALL(  0, sys_ni_syscall, 0)
+#define __NR_xtensa				  1
+__SYSCALL(  1, sys_ni_syscall, 0)
+#define __NR_available4				  2
+__SYSCALL(  2, sys_ni_syscall, 0)
+#define __NR_available5				  3
+__SYSCALL(  3, sys_ni_syscall, 0)
+#define __NR_available6				  4
+__SYSCALL(  4, sys_ni_syscall, 0)
+#define __NR_available7				  5
+__SYSCALL(  5, sys_ni_syscall, 0)
+#define __NR_available8				  6
+__SYSCALL(  6, sys_ni_syscall, 0)
+#define __NR_available9				  7
+__SYSCALL(  7, sys_ni_syscall, 0)
+
+/* File Operations */
+
+#define __NR_open 				  8
+__SYSCALL(  8, sys_open, 3)
+#define __NR_close 				  9
+__SYSCALL(  9, sys_close, 1)
+#define __NR_dup 				 10
+__SYSCALL( 10, sys_dup, 1)
+#define __NR_dup2 				 11
+__SYSCALL( 11, sys_dup2, 2)
+#define __NR_read 				 12
+__SYSCALL( 12, sys_read, 3)
+#define __NR_write 				 13
+__SYSCALL( 13, sys_write, 3)
+#define __NR_select 				 14
+__SYSCALL( 14, sys_select, 5)
+#define __NR_lseek 				 15
+__SYSCALL( 15, sys_lseek, 3)
+#define __NR_poll 				 16
+__SYSCALL( 16, sys_poll, 3)
+#define __NR__llseek				 17
+__SYSCALL( 17, sys_llseek, 5)
+#define __NR_epoll_wait 			 18
+__SYSCALL( 18, sys_epoll_wait, 4)
+#define __NR_epoll_ctl 				 19
+__SYSCALL( 19, sys_epoll_ctl, 4)
+#define __NR_epoll_create 			 20
+__SYSCALL( 20, sys_epoll_create, 1)
+#define __NR_creat 				 21
+__SYSCALL( 21, sys_creat, 2)
+#define __NR_truncate 				 22
+__SYSCALL( 22, sys_truncate, 2)
+#define __NR_ftruncate 				 23
+__SYSCALL( 23, sys_ftruncate, 2)
+#define __NR_readv 				 24
+__SYSCALL( 24, sys_readv, 3)
+#define __NR_writev 				 25
+__SYSCALL( 25, sys_writev, 3)
+#define __NR_fsync 				 26
+__SYSCALL( 26, sys_fsync, 1)
+#define __NR_fdatasync 				 27
+__SYSCALL( 27, sys_fdatasync, 1)
+#define __NR_truncate64 			 28
+__SYSCALL( 28, sys_truncate64, 2)
+#define __NR_ftruncate64 			 29
+__SYSCALL( 29, sys_ftruncate64, 2)
+#define __NR_pread64 				 30
+__SYSCALL( 30, sys_pread64, 6)
+#define __NR_pwrite64 				 31
+__SYSCALL( 31, sys_pwrite64, 6)
+
+#define __NR_link 				 32
+__SYSCALL( 32, sys_link, 2)
+#define __NR_rename 				 33
+__SYSCALL( 33, sys_rename, 2)
+#define __NR_symlink 				 34
+__SYSCALL( 34, sys_symlink, 2)
+#define __NR_readlink 				 35
+__SYSCALL( 35, sys_readlink, 3)
+#define __NR_mknod 				 36
+__SYSCALL( 36, sys_mknod, 3)
+#define __NR_pipe 				 37
+__SYSCALL( 37, sys_pipe, 1)
+#define __NR_unlink 				 38
+__SYSCALL( 38, sys_unlink, 1)
+#define __NR_rmdir 				 39
+__SYSCALL( 39, sys_rmdir, 1)
+
+#define __NR_mkdir 				 40
+__SYSCALL( 40, sys_mkdir, 2)
+#define __NR_chdir 				 41
+__SYSCALL( 41, sys_chdir, 1)
+#define __NR_fchdir 				 42
+__SYSCALL( 42, sys_fchdir, 1)
+#define __NR_getcwd 				 43
+__SYSCALL( 43, sys_getcwd, 2)
+
+#define __NR_chmod 				 44
+__SYSCALL( 44, sys_chmod, 2)
+#define __NR_chown 				 45
+__SYSCALL( 45, sys_chown, 3)
+#define __NR_stat 				 46
+__SYSCALL( 46, sys_newstat, 2)
+#define __NR_stat64 				 47
+__SYSCALL( 47, sys_stat64, 2)
+
+#define __NR_lchown 				 48
+__SYSCALL( 48, sys_lchown, 3)
+#define __NR_lstat 				 49
+__SYSCALL( 49, sys_newlstat, 2)
+#define __NR_lstat64 				 50
+__SYSCALL( 50, sys_lstat64, 2)
+#define __NR_available51			 51
+__SYSCALL( 51, sys_ni_syscall, 0)
+
+#define __NR_fchmod 				 52
+__SYSCALL( 52, sys_fchmod, 2)
+#define __NR_fchown 				 53
+__SYSCALL( 53, sys_fchown, 3)
+#define __NR_fstat 				 54
+__SYSCALL( 54, sys_newfstat, 2)
+#define __NR_fstat64 				 55
+__SYSCALL( 55, sys_fstat64, 2)
+
+#define __NR_flock 				 56
+__SYSCALL( 56, sys_flock, 2)
+#define __NR_access 				 57
+__SYSCALL( 57, sys_access, 2)
+#define __NR_umask 				 58
+__SYSCALL( 58, sys_umask, 1)
+#define __NR_getdents 				 59
+__SYSCALL( 59, sys_getdents, 3)
+#define __NR_getdents64 			 60
+__SYSCALL( 60, sys_getdents64, 3)
+#define __NR_fcntl64 				 61
+__SYSCALL( 61, sys_fcntl64, 3)
+#define __NR_available62			 62
+__SYSCALL( 62, sys_ni_syscall, 0)
+#define __NR_fadvise64_64 			 63
+__SYSCALL( 63, xtensa_fadvise64_64, 6)
+#define __NR_utime				 64	/* glibc 2.3.3 ?? */
+__SYSCALL( 64, sys_utime, 2)
+#define __NR_utimes 				 65
+__SYSCALL( 65, sys_utimes, 2)
+#define __NR_ioctl 				 66
+__SYSCALL( 66, sys_ioctl, 3)
+#define __NR_fcntl 				 67
+__SYSCALL( 67, sys_fcntl, 3)
+
+#define __NR_setxattr 				 68
+__SYSCALL( 68, sys_setxattr, 5)
+#define __NR_getxattr 				 69
+__SYSCALL( 69, sys_getxattr, 4)
+#define __NR_listxattr 				 70
+__SYSCALL( 70, sys_listxattr, 3)
+#define __NR_removexattr 			 71
+__SYSCALL( 71, sys_removexattr, 2)
+#define __NR_lsetxattr 				 72
+__SYSCALL( 72, sys_lsetxattr, 5)
+#define __NR_lgetxattr 				 73
+__SYSCALL( 73, sys_lgetxattr, 4)
+#define __NR_llistxattr 			 74
+__SYSCALL( 74, sys_llistxattr, 3)
+#define __NR_lremovexattr 			 75
+__SYSCALL( 75, sys_lremovexattr, 2)
+#define __NR_fsetxattr 				 76
+__SYSCALL( 76, sys_fsetxattr, 5)
+#define __NR_fgetxattr 				 77
+__SYSCALL( 77, sys_fgetxattr, 4)
+#define __NR_flistxattr 			 78
+__SYSCALL( 78, sys_flistxattr, 3)
+#define __NR_fremovexattr 			 79
+__SYSCALL( 79, sys_fremovexattr, 2)
+
+/* File Map / Shared Memory Operations */
+
+#define __NR_mmap2 				 80
+__SYSCALL( 80, sys_mmap_pgoff, 6)
+#define __NR_munmap 				 81
+__SYSCALL( 81, sys_munmap, 2)
+#define __NR_mprotect 				 82
+__SYSCALL( 82, sys_mprotect, 3)
+#define __NR_brk 				 83
+__SYSCALL( 83, sys_brk, 1)
+#define __NR_mlock 				 84
+__SYSCALL( 84, sys_mlock, 2)
+#define __NR_munlock 				 85
+__SYSCALL( 85, sys_munlock, 2)
+#define __NR_mlockall 				 86
+__SYSCALL( 86, sys_mlockall, 1)
+#define __NR_munlockall 			 87
+__SYSCALL( 87, sys_munlockall, 0)
+#define __NR_mremap 				 88
+__SYSCALL( 88, sys_mremap, 4)
+#define __NR_msync 				 89
+__SYSCALL( 89, sys_msync, 3)
+#define __NR_mincore 				 90
+__SYSCALL( 90, sys_mincore, 3)
+#define __NR_madvise 				 91
+__SYSCALL( 91, sys_madvise, 3)
+#define __NR_shmget				 92
+__SYSCALL( 92, sys_shmget, 4)
+#define __NR_shmat				 93
+__SYSCALL( 93, xtensa_shmat, 4)
+#define __NR_shmctl				 94
+__SYSCALL( 94, sys_shmctl, 4)
+#define __NR_shmdt				 95
+__SYSCALL( 95, sys_shmdt, 4)
+
+/* Socket Operations */
+
+#define __NR_socket 				 96
+__SYSCALL( 96, sys_socket, 3)
+#define __NR_setsockopt 			 97
+__SYSCALL( 97, sys_setsockopt, 5)
+#define __NR_getsockopt 			 98
+__SYSCALL( 98, sys_getsockopt, 5)
+#define __NR_shutdown 				 99
+__SYSCALL( 99, sys_shutdown, 2)
+
+#define __NR_bind 				100
+__SYSCALL(100, sys_bind, 3)
+#define __NR_connect 				101
+__SYSCALL(101, sys_connect, 3)
+#define __NR_listen 				102
+__SYSCALL(102, sys_listen, 2)
+#define __NR_accept 				103
+__SYSCALL(103, sys_accept, 3)
+
+#define __NR_getsockname 			104
+__SYSCALL(104, sys_getsockname, 3)
+#define __NR_getpeername 			105
+__SYSCALL(105, sys_getpeername, 3)
+#define __NR_sendmsg 				106
+__SYSCALL(106, sys_sendmsg, 3)
+#define __NR_recvmsg 				107
+__SYSCALL(107, sys_recvmsg, 3)
+#define __NR_send 				108
+__SYSCALL(108, sys_send, 4)
+#define __NR_recv 				109
+__SYSCALL(109, sys_recv, 4)
+#define __NR_sendto 				110
+__SYSCALL(110, sys_sendto, 6)
+#define __NR_recvfrom 				111
+__SYSCALL(111, sys_recvfrom, 6)
+
+#define __NR_socketpair 			112
+__SYSCALL(112, sys_socketpair, 4)
+#define __NR_sendfile 				113
+__SYSCALL(113, sys_sendfile, 4)
+#define __NR_sendfile64 			114
+__SYSCALL(114, sys_sendfile64, 4)
+#define __NR_available115			115
+__SYSCALL(115, sys_ni_syscall, 0)
+
+/* Process Operations */
+
+#define __NR_clone 				116
+__SYSCALL(116, xtensa_clone, 5)
+#define __NR_execve 				117
+__SYSCALL(117, xtensa_execve, 3)
+#define __NR_exit 				118
+__SYSCALL(118, sys_exit, 1)
+#define __NR_exit_group 			119
+__SYSCALL(119, sys_exit_group, 1)
+#define __NR_getpid 				120
+__SYSCALL(120, sys_getpid, 0)
+#define __NR_wait4 				121
+__SYSCALL(121, sys_wait4, 4)
+#define __NR_waitid 				122
+__SYSCALL(122, sys_waitid, 5)
+#define __NR_kill 				123
+__SYSCALL(123, sys_kill, 2)
+#define __NR_tkill 				124
+__SYSCALL(124, sys_tkill, 2)
+#define __NR_tgkill 				125
+__SYSCALL(125, sys_tgkill, 3)
+#define __NR_set_tid_address 			126
+__SYSCALL(126, sys_set_tid_address, 1)
+#define __NR_gettid 				127
+__SYSCALL(127, sys_gettid, 0)
+#define __NR_setsid 				128
+__SYSCALL(128, sys_setsid, 0)
+#define __NR_getsid 				129
+__SYSCALL(129, sys_getsid, 1)
+#define __NR_prctl 				130
+__SYSCALL(130, sys_prctl, 5)
+#define __NR_personality 			131
+__SYSCALL(131, sys_personality, 1)
+#define __NR_getpriority 			132
+__SYSCALL(132, sys_getpriority, 2)
+#define __NR_setpriority 			133
+__SYSCALL(133, sys_setpriority, 3)
+#define __NR_setitimer 				134
+__SYSCALL(134, sys_setitimer, 3)
+#define __NR_getitimer 				135
+__SYSCALL(135, sys_getitimer, 2)
+#define __NR_setuid 				136
+__SYSCALL(136, sys_setuid, 1)
+#define __NR_getuid 				137
+__SYSCALL(137, sys_getuid, 0)
+#define __NR_setgid 				138
+__SYSCALL(138, sys_setgid, 1)
+#define __NR_getgid 				139
+__SYSCALL(139, sys_getgid, 0)
+#define __NR_geteuid 				140
+__SYSCALL(140, sys_geteuid, 0)
+#define __NR_getegid 				141
+__SYSCALL(141, sys_getegid, 0)
+#define __NR_setreuid 				142
+__SYSCALL(142, sys_setreuid, 2)
+#define __NR_setregid 				143
+__SYSCALL(143, sys_setregid, 2)
+#define __NR_setresuid 				144
+__SYSCALL(144, sys_setresuid, 3)
+#define __NR_getresuid 				145
+__SYSCALL(145, sys_getresuid, 3)
+#define __NR_setresgid 				146
+__SYSCALL(146, sys_setresgid, 3)
+#define __NR_getresgid 				147
+__SYSCALL(147, sys_getresgid, 3)
+#define __NR_setpgid 				148
+__SYSCALL(148, sys_setpgid, 2)
+#define __NR_getpgid 				149
+__SYSCALL(149, sys_getpgid, 1)
+#define __NR_getppid 				150
+__SYSCALL(150, sys_getppid, 0)
+#define __NR_getpgrp				151
+__SYSCALL(151, sys_getpgrp, 0)
+
+#define __NR_reserved152 			152	/* set_thread_area */
+__SYSCALL(152, sys_ni_syscall, 0)
+#define __NR_reserved153 			153	/* get_thread_area */
+__SYSCALL(153, sys_ni_syscall, 0)
+#define __NR_times 				154
+__SYSCALL(154, sys_times, 1)
+#define __NR_acct 				155
+__SYSCALL(155, sys_acct, 1)
+#define __NR_sched_setaffinity 			156
+__SYSCALL(156, sys_sched_setaffinity, 3)
+#define __NR_sched_getaffinity 			157
+__SYSCALL(157, sys_sched_getaffinity, 3)
+#define __NR_capget 				158
+__SYSCALL(158, sys_capget, 2)
+#define __NR_capset 				159
+__SYSCALL(159, sys_capset, 2)
+#define __NR_ptrace 				160
+__SYSCALL(160, sys_ptrace, 4)
+#define __NR_semtimedop				161
+__SYSCALL(161, sys_semtimedop, 5)
+#define __NR_semget				162
+__SYSCALL(162, sys_semget, 4)
+#define __NR_semop				163
+__SYSCALL(163, sys_semop, 4)
+#define __NR_semctl				164
+__SYSCALL(164, sys_semctl, 4)
+#define __NR_available165			165
+__SYSCALL(165, sys_ni_syscall, 0)
+#define __NR_msgget				166
+__SYSCALL(166, sys_msgget, 4)
+#define __NR_msgsnd				167
+__SYSCALL(167, sys_msgsnd, 4)
+#define __NR_msgrcv				168
+__SYSCALL(168, sys_msgrcv, 4)
+#define __NR_msgctl				169
+__SYSCALL(169, sys_msgctl, 4)
+#define __NR_available170			170
+__SYSCALL(170, sys_ni_syscall, 0)
+#define __NR_available171			171
+__SYSCALL(171, sys_ni_syscall, 0)
+
+/* File System */
+
+#define __NR_mount 				172
+__SYSCALL(172, sys_mount, 5)
+#define __NR_swapon 				173
+__SYSCALL(173, sys_swapon, 2)
+#define __NR_chroot 				174
+__SYSCALL(174, sys_chroot, 1)
+#define __NR_pivot_root 			175
+__SYSCALL(175, sys_pivot_root, 2)
+#define __NR_umount 				176
+__SYSCALL(176, sys_umount, 2)
+#define __NR_swapoff 				177
+__SYSCALL(177, sys_swapoff, 1)
+#define __NR_sync 				178
+__SYSCALL(178, sys_sync, 0)
+#define __NR_available179			179
+__SYSCALL(179, sys_ni_syscall, 0)
+#define __NR_setfsuid 				180
+__SYSCALL(180, sys_setfsuid, 1)
+#define __NR_setfsgid 				181
+__SYSCALL(181, sys_setfsgid, 1)
+#define __NR_sysfs 				182
+__SYSCALL(182, sys_sysfs, 3)
+#define __NR_ustat 				183
+__SYSCALL(183, sys_ustat, 2)
+#define __NR_statfs 				184
+__SYSCALL(184, sys_statfs, 2)
+#define __NR_fstatfs 				185
+__SYSCALL(185, sys_fstatfs, 2)
+#define __NR_statfs64 				186
+__SYSCALL(186, sys_statfs64, 3)
+#define __NR_fstatfs64 				187
+__SYSCALL(187, sys_fstatfs64, 3)
+
+/* System */
+
+#define __NR_setrlimit 				188
+__SYSCALL(188, sys_setrlimit, 2)
+#define __NR_getrlimit 				189
+__SYSCALL(189, sys_getrlimit, 2)
+#define __NR_getrusage 				190
+__SYSCALL(190, sys_getrusage, 2)
+#define __NR_futex				191
+__SYSCALL(191, sys_futex, 5)
+#define __NR_gettimeofday 			192
+__SYSCALL(192, sys_gettimeofday, 2)
+#define __NR_settimeofday 			193
+__SYSCALL(193, sys_settimeofday, 2)
+#define __NR_adjtimex 				194
+__SYSCALL(194, sys_adjtimex, 1)
+#define __NR_nanosleep	 			195
+__SYSCALL(195, sys_nanosleep, 2)
+#define __NR_getgroups 				196
+__SYSCALL(196, sys_getgroups, 2)
+#define __NR_setgroups 				197
+__SYSCALL(197, sys_setgroups, 2)
+#define __NR_sethostname 			198
+__SYSCALL(198, sys_sethostname, 2)
+#define __NR_setdomainname 			199
+__SYSCALL(199, sys_setdomainname, 2)
+#define __NR_syslog 				200
+__SYSCALL(200, sys_syslog, 3)
+#define __NR_vhangup 				201
+__SYSCALL(201, sys_vhangup, 0)
+#define __NR_uselib 				202
+__SYSCALL(202, sys_uselib, 1)
+#define __NR_reboot 				203
+__SYSCALL(203, sys_reboot, 3)
+#define __NR_quotactl 				204
+__SYSCALL(204, sys_quotactl, 4)
+#define __NR_nfsservctl 			205
+__SYSCALL(205, sys_nfsservctl, 3)
+#define __NR__sysctl 				206
+__SYSCALL(206, sys_sysctl, 1)
+#define __NR_bdflush 				207
+__SYSCALL(207, sys_bdflush, 2)
+#define __NR_uname 				208
+__SYSCALL(208, sys_newuname, 1)
+#define __NR_sysinfo 				209
+__SYSCALL(209, sys_sysinfo, 1)
+#define __NR_init_module 			210
+__SYSCALL(210, sys_init_module, 2)
+#define __NR_delete_module 			211
+__SYSCALL(211, sys_delete_module, 1)
+
+#define __NR_sched_setparam 			212
+__SYSCALL(212, sys_sched_setparam, 2)
+#define __NR_sched_getparam 			213
+__SYSCALL(213, sys_sched_getparam, 2)
+#define __NR_sched_setscheduler 		214
+__SYSCALL(214, sys_sched_setscheduler, 3)
+#define __NR_sched_getscheduler 		215
+__SYSCALL(215, sys_sched_getscheduler, 1)
+#define __NR_sched_get_priority_max 		216
+__SYSCALL(216, sys_sched_get_priority_max, 1)
+#define __NR_sched_get_priority_min 		217
+__SYSCALL(217, sys_sched_get_priority_min, 1)
+#define __NR_sched_rr_get_interval 		218
+__SYSCALL(218, sys_sched_rr_get_interval, 2)
+#define __NR_sched_yield 			219
+__SYSCALL(219, sys_sched_yield, 0)
+#define __NR_available222 			222
+__SYSCALL(222, sys_ni_syscall, 0)
+
+/* Signal Handling */
+
+#define __NR_restart_syscall 			223
+__SYSCALL(223, sys_restart_syscall, 0)
+#define __NR_sigaltstack 			224
+__SYSCALL(224, xtensa_sigaltstack, 2)
+#define __NR_rt_sigreturn 			225
+__SYSCALL(225, xtensa_rt_sigreturn, 1)
+#define __NR_rt_sigaction 			226
+__SYSCALL(226, sys_rt_sigaction, 4)
+#define __NR_rt_sigprocmask 			227
+__SYSCALL(227, sys_rt_sigprocmask, 4)
+#define __NR_rt_sigpending 			228
+__SYSCALL(228, sys_rt_sigpending, 2)
+#define __NR_rt_sigtimedwait 			229
+__SYSCALL(229, sys_rt_sigtimedwait, 4)
+#define __NR_rt_sigqueueinfo 			230
+__SYSCALL(230, sys_rt_sigqueueinfo, 3)
+#define __NR_rt_sigsuspend 			231
+__SYSCALL(231, xtensa_rt_sigsuspend, 2)
+
+/* Message */
+
+#define __NR_mq_open 				232
+__SYSCALL(232, sys_mq_open, 4)
+#define __NR_mq_unlink 				233
+__SYSCALL(233, sys_mq_unlink, 1)
+#define __NR_mq_timedsend 			234
+__SYSCALL(234, sys_mq_timedsend, 5)
+#define __NR_mq_timedreceive 			235
+__SYSCALL(235, sys_mq_timedreceive, 5)
+#define __NR_mq_notify 				236
+__SYSCALL(236, sys_mq_notify, 2)
+#define __NR_mq_getsetattr 			237
+__SYSCALL(237, sys_mq_getsetattr, 3)
+#define __NR_available238			238
+__SYSCALL(238, sys_ni_syscall, 0)
+
+/* IO */
+
+#define __NR_io_setup 				239
+__SYSCALL(239, sys_io_setup, 2)
+#define __NR_io_destroy 			240
+__SYSCALL(240, sys_io_destroy, 1)
+#define __NR_io_submit 				241
+__SYSCALL(241, sys_io_submit, 3)
+#define __NR_io_getevents 			242
+__SYSCALL(242, sys_io_getevents, 5)
+#define __NR_io_cancel 				243
+__SYSCALL(243, sys_io_cancel, 3)
+#define __NR_clock_settime 			244
+__SYSCALL(244, sys_clock_settime, 2)
+#define __NR_clock_gettime 			245
+__SYSCALL(245, sys_clock_gettime, 2)
+#define __NR_clock_getres 			246
+__SYSCALL(246, sys_clock_getres, 2)
+#define __NR_clock_nanosleep 			247
+__SYSCALL(247, sys_clock_nanosleep, 4)
+
+/* Timer */
+
+#define __NR_timer_create 			248
+__SYSCALL(248, sys_timer_create, 3)
+#define __NR_timer_delete 			249
+__SYSCALL(249, sys_timer_delete, 1)
+#define __NR_timer_settime 			250
+__SYSCALL(250, sys_timer_settime, 4)
+#define __NR_timer_gettime 			251
+__SYSCALL(251, sys_timer_gettime, 2)
+#define __NR_timer_getoverrun 			252
+__SYSCALL(252, sys_timer_getoverrun, 1)
+
+/* System */
+
+#define __NR_reserved244 			253
+__SYSCALL(253, sys_ni_syscall, 0)
+#define __NR_lookup_dcookie 			254
+__SYSCALL(254, sys_lookup_dcookie, 4)
+#define __NR_available255			255
+__SYSCALL(255, sys_ni_syscall, 0)
+#define __NR_add_key 				256
+__SYSCALL(256, sys_add_key, 5)
+#define __NR_request_key 			257
+__SYSCALL(257, sys_request_key, 5)
+#define __NR_keyctl 				258
+__SYSCALL(258, sys_keyctl, 5)
+#define __NR_available259			259
+__SYSCALL(259, sys_ni_syscall, 0)
+
+
+#define __NR_readahead				260
+__SYSCALL(260, sys_readahead, 5)
+#define __NR_remap_file_pages			261
+__SYSCALL(261, sys_remap_file_pages, 5)
+#define __NR_migrate_pages			262
+__SYSCALL(262, sys_migrate_pages, 0)
+#define __NR_mbind				263
+__SYSCALL(263, sys_mbind, 6)
+#define __NR_get_mempolicy			264
+__SYSCALL(264, sys_get_mempolicy, 5)
+#define __NR_set_mempolicy			265
+__SYSCALL(265, sys_set_mempolicy, 3)
+#define __NR_unshare				266
+__SYSCALL(266, sys_unshare, 1)
+#define __NR_move_pages				267
+__SYSCALL(267, sys_move_pages, 0)
+#define __NR_splice				268
+__SYSCALL(268, sys_splice, 0)
+#define __NR_tee				269
+__SYSCALL(269, sys_tee, 0)
+#define __NR_vmsplice				270
+__SYSCALL(270, sys_vmsplice, 0)
+#define __NR_available271			271
+__SYSCALL(271, sys_ni_syscall, 0)
+
+#define __NR_pselect6				272
+__SYSCALL(272, sys_pselect6, 0)
+#define __NR_ppoll				273
+__SYSCALL(273, sys_ppoll, 0)
+#define __NR_epoll_pwait			274
+__SYSCALL(274, sys_epoll_pwait, 0)
+#define __NR_available275			275
+__SYSCALL(275, sys_ni_syscall, 0)
+
+#define __NR_inotify_init			276
+__SYSCALL(276, sys_inotify_init, 0)
+#define __NR_inotify_add_watch			277
+__SYSCALL(277, sys_inotify_add_watch, 3)
+#define __NR_inotify_rm_watch			278
+__SYSCALL(278, sys_inotify_rm_watch, 2)
+#define __NR_available279			279
+__SYSCALL(279, sys_ni_syscall, 0)
+
+#define __NR_getcpu				280
+__SYSCALL(280, sys_getcpu, 0)
+#define __NR_kexec_load				281
+__SYSCALL(281, sys_ni_syscall, 0)
+
+#define __NR_ioprio_set				282
+__SYSCALL(282, sys_ioprio_set, 2)
+#define __NR_ioprio_get				283
+__SYSCALL(283, sys_ioprio_get, 3)
+
+#define __NR_set_robust_list			284
+__SYSCALL(284, sys_set_robust_list, 3)
+#define __NR_get_robust_list			285
+__SYSCALL(285, sys_get_robust_list, 3)
+#define __NR_reserved286			286	/* sync_file_rangeX */
+__SYSCALL(286, sys_ni_syscall, 3)
+#define __NR_available287			287
+__SYSCALL(287, sys_faccessat, 0)
+
+/* Relative File Operations */
+
+#define __NR_openat				288
+__SYSCALL(288, sys_openat, 4)
+#define __NR_mkdirat				289
+__SYSCALL(289, sys_mkdirat, 3)
+#define __NR_mknodat				290
+__SYSCALL(290, sys_mknodat, 4)
+#define __NR_unlinkat				291
+__SYSCALL(291, sys_unlinkat, 3)
+#define __NR_renameat				292
+__SYSCALL(292, sys_renameat, 4)
+#define __NR_linkat				293
+__SYSCALL(293, sys_linkat, 5)
+#define __NR_symlinkat				294
+__SYSCALL(294, sys_symlinkat, 3)
+#define __NR_readlinkat				295
+__SYSCALL(295, sys_readlinkat, 4)
+#define __NR_utimensat				296
+__SYSCALL(296, sys_utimensat, 0)
+#define __NR_fchownat				297
+__SYSCALL(297, sys_fchownat, 5)
+#define __NR_futimesat				298
+__SYSCALL(298, sys_futimesat, 4)
+#define __NR_fstatat64				299
+__SYSCALL(299, sys_fstatat64, 0)
+#define __NR_fchmodat				300
+__SYSCALL(300, sys_fchmodat, 4)
+#define __NR_faccessat				301
+__SYSCALL(301, sys_faccessat, 4)
+#define __NR_available302			302
+__SYSCALL(302, sys_ni_syscall, 0)
+#define __NR_available303			303
+__SYSCALL(303, sys_ni_syscall, 0)
+
+#define __NR_signalfd				304
+__SYSCALL(304, sys_signalfd, 3)
+/*  305 was __NR_timerfd  */
+__SYSCALL(305, sys_ni_syscall, 0)
+#define __NR_eventfd				306
+__SYSCALL(306, sys_eventfd, 1)
+#define __NR_recvmmsg				307
+__SYSCALL(307, sys_recvmmsg, 5)
+#define __NR_setns				308
+__SYSCALL(308, sys_setns, 2)
+
+#define __NR_syscall_count			309
+
+/*
+ * sysxtensa syscall handler
+ *
+ * int sysxtensa (SYS_XTENSA_ATOMIC_SET,     ptr, val,    unused);
+ * int sysxtensa (SYS_XTENSA_ATOMIC_ADD,     ptr, val,    unused);
+ * int sysxtensa (SYS_XTENSA_ATOMIC_EXG_ADD, ptr, val,    unused);
+ * int sysxtensa (SYS_XTENSA_ATOMIC_CMP_SWP, ptr, oldval, newval);
+ *        a2            a6                   a3    a4      a5
+ */
+
+#define SYS_XTENSA_RESERVED               0     /* don't use this */
+#define SYS_XTENSA_ATOMIC_SET             1     /* set variable */
+#define SYS_XTENSA_ATOMIC_EXG_ADD         2     /* exchange memory and add */
+#define SYS_XTENSA_ATOMIC_ADD             3     /* add to memory */
+#define SYS_XTENSA_ATOMIC_CMP_SWP         4     /* compare and swap */
+
+#define SYS_XTENSA_COUNT                  5     /* count */
+
+#ifdef __KERNEL__
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall");
+
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+#define __ARCH_WANT_SYS_GETPGRP
+
+/* 
+ * Ignore legacy system calls in the checksyscalls.sh script
+ */
+
+#define __IGNORE_fork				/* use clone */
+#define __IGNORE_time
+#define __IGNORE_alarm				/* use setitimer */
+#define __IGNORE_pause
+#define __IGNORE_mmap				/* use mmap2 */
+#define __IGNORE_vfork				/* use clone */
+#define __IGNORE_fadvise64			/* use fadvise64_64 */
+
+#endif	/* __KERNEL__ */
+#endif	/* _XTENSA_UNISTD_H */
diff --git a/arch/xtensa/include/asm/user.h b/arch/xtensa/include/asm/user.h
new file mode 100644
index 00000000..2c3ed233
--- /dev/null
+++ b/arch/xtensa/include/asm/user.h
@@ -0,0 +1,20 @@
+/*
+ * include/asm-xtensa/user.h
+ *
+ * Xtensa Processor version.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_USER_H
+#define _XTENSA_USER_H
+
+/* This file usually defines a 'struct user' structure. However, it it only
+ * used for a.out file, which are not supported on Xtensa.
+ */
+
+#endif	/* _XTENSA_USER_H */
diff --git a/arch/xtensa/include/asm/vga.h b/arch/xtensa/include/asm/vga.h
new file mode 100644
index 00000000..1fd8cab3
--- /dev/null
+++ b/arch/xtensa/include/asm/vga.h
@@ -0,0 +1,19 @@
+/*
+ * include/asm-xtensa/vga.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_VGA_H
+#define _XTENSA_VGA_H
+
+#define VGA_MAP_MEM(x,s) (unsigned long)phys_to_virt(x)
+
+#define vga_readb(x)	(*(x))
+#define vga_writeb(x,y)	(*(y) = (x))
+
+#endif
diff --git a/arch/xtensa/include/asm/xor.h b/arch/xtensa/include/asm/xor.h
new file mode 100644
index 00000000..e7b1f083
--- /dev/null
+++ b/arch/xtensa/include/asm/xor.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-xtensa/xor.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_XOR_H
+#define _XTENSA_XOR_H
+
+#include <asm-generic/xor.h>
+
+#endif
diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile
new file mode 100644
index 00000000..2d2728b3
--- /dev/null
+++ b/arch/xtensa/kernel/Makefile
@@ -0,0 +1,34 @@
+#
+# Makefile for the Linux/Xtensa kernel.
+#
+
+extra-y := head.o vmlinux.lds
+
+obj-y := align.o entry.o irq.o coprocessor.o process.o ptrace.o \
+	 setup.o signal.o syscall.o time.o traps.o vectors.o platform.o  \
+	 pci-dma.o init_task.o io.o
+
+obj-$(CONFIG_KGDB) += xtensa-stub.o
+obj-$(CONFIG_PCI) += pci.o
+obj-$(CONFIG_MODULES) += xtensa_ksyms.o module.o
+
+# In the Xtensa architecture, assembly generates literals which must always
+# precede the L32R instruction with a relative offset less than 256 kB.
+# Therefore, the .text and .literal section must be combined in parenthesis
+# in the linker script, such as: *(.literal .text).
+#
+# We need to post-process the generated vmlinux.lds scripts to convert
+# *(xxx.text) to  *(xxx.literal xxx.text) for the following text sections:
+#   .text .ref.text .*init.text .*exit.text .text.*
+#
+# Replicate rules in scripts/Makefile.build
+
+sed-y = -e 's/\*(\(\.[a-z]*it\|\.ref\|\)\.text)/*(\1.literal \1.text)/g'    \
+	-e 's/\*(\(\.text\.[a-z]*\))/*(\1.literal \1)/g'
+
+quiet_cmd__cpp_lds_S = LDS     $@
+      cmd__cpp_lds_S = $(CPP) $(cpp_flags) -P -C -Uxtensa -D__ASSEMBLY__ $< \
+                       | sed $(sed-y) >$@
+
+$(obj)/vmlinux.lds: $(src)/vmlinux.lds.S FORCE
+	$(call if_changed_dep,_cpp_lds_S)
diff --git a/arch/xtensa/kernel/align.S b/arch/xtensa/kernel/align.S
new file mode 100644
index 00000000..33d6e9d2
--- /dev/null
+++ b/arch/xtensa/kernel/align.S
@@ -0,0 +1,455 @@
+/*
+ * arch/xtensa/kernel/align.S
+ *
+ * Handle unalignment exceptions in kernel space.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of
+ * this archive for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica, Inc.
+ *
+ * Rewritten by Chris Zankel <chris@zankel.net>
+ *
+ * Based on work from Joe Taylor <joe@tensilica.com, joetylr@yahoo.com>
+ * and Marc Gauthier <marc@tensilica.com, marc@alimni.uwaterloo.ca>
+ */
+
+#include <linux/linkage.h>
+#include <asm/current.h>
+#include <asm/asm-offsets.h>
+#include <asm/processor.h>
+
+#if XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION
+
+/*  First-level exception handler for unaligned exceptions.
+ *
+ *  Note: This handler works only for kernel exceptions.  Unaligned user
+ *        access should get a seg fault.
+ */
+
+/* Big and little endian 16-bit values are located in
+ * different halves of a register.  HWORD_START helps to
+ * abstract the notion of extracting a 16-bit value from a
+ * register.
+ * We also have to define new shifting instructions because
+ * lsb and msb are on 'opposite' ends in a register for
+ * different endian machines.
+ *
+ * Assume a memory region in ascending address:
+ *   	0 1 2 3|4 5 6 7
+ *
+ * When loading one word into a register, the content of that register is:
+ *  LE	3 2 1 0, 7 6 5 4
+ *  BE  0 1 2 3, 4 5 6 7
+ *
+ * Masking the bits of the higher/lower address means:
+ *  LE  X X 0 0, 0 0 X X
+ *  BE	0 0 X X, X X 0 0
+ *
+ * Shifting to higher/lower addresses, means:
+ *  LE  shift left / shift right
+ *  BE  shift right / shift left
+ *
+ * Extracting 16 bits from a 32 bit reg. value to higher/lower address means:
+ *  LE  mask 0 0 X X / shift left
+ *  BE  shift left / mask 0 0 X X
+ */
+
+#define UNALIGNED_USER_EXCEPTION
+
+#if XCHAL_HAVE_BE
+
+#define HWORD_START	16
+#define	INSN_OP0	28
+#define	INSN_T		24
+#define	INSN_OP1	16
+
+.macro __src_b	r, w0, w1;	src	\r, \w0, \w1;	.endm
+.macro __ssa8	r;		ssa8b	\r;		.endm
+.macro __ssa8r	r;		ssa8l	\r;		.endm
+.macro __sh	r, s;		srl	\r, \s;		.endm
+.macro __sl	r, s;		sll	\r, \s;		.endm
+.macro __exth	r, s;		extui	\r, \s, 0, 16;	.endm
+.macro __extl	r, s;		slli	\r, \s, 16;	.endm
+
+#else
+
+#define HWORD_START	0
+#define	INSN_OP0	0
+#define	INSN_T		4
+#define	INSN_OP1	12
+
+.macro __src_b	r, w0, w1;	src	\r, \w1, \w0;	.endm
+.macro __ssa8	r;		ssa8l	\r;		.endm
+.macro __ssa8r	r;		ssa8b	\r;		.endm
+.macro __sh	r, s;		sll	\r, \s;		.endm
+.macro __sl	r, s;		srl	\r, \s;		.endm
+.macro __exth	r, s;		slli	\r, \s, 16;	.endm
+.macro __extl	r, s;		extui	\r, \s, 0, 16;	.endm
+
+#endif
+
+/*
+ *	xxxx xxxx = imm8 field
+ *	     yyyy = imm4 field
+ *	     ssss = s field
+ *	     tttt = t field
+ *
+ *	       		 16		    0
+ *		          -------------------
+ *	L32I.N		  yyyy ssss tttt 1000
+ *	S32I.N	          yyyy ssss tttt 1001
+ *
+ *	       23			    0
+ *		-----------------------------
+ *	res	          0000           0010
+ *	L16UI	xxxx xxxx 0001 ssss tttt 0010
+ *	L32I	xxxx xxxx 0010 ssss tttt 0010
+ *	XXX	          0011 ssss tttt 0010
+ *	XXX	          0100 ssss tttt 0010
+ *	S16I	xxxx xxxx 0101 ssss tttt 0010
+ *	S32I	xxxx xxxx 0110 ssss tttt 0010
+ *	XXX	          0111 ssss tttt 0010
+ *	XXX	          1000 ssss tttt 0010
+ *	L16SI	xxxx xxxx 1001 ssss tttt 0010
+ *	XXX	          1010           0010
+ *      **L32AI	xxxx xxxx 1011 ssss tttt 0010 unsupported
+ *	XXX	          1100           0010
+ *	XXX	          1101           0010
+ *	XXX	          1110           0010
+ *	**S32RI	xxxx xxxx 1111 ssss tttt 0010 unsupported
+ *		-----------------------------
+ *                           ^         ^    ^
+ *    sub-opcode (NIBBLE_R) -+         |    |
+ *       t field (NIBBLE_T) -----------+    |
+ *  major opcode (NIBBLE_OP0) --------------+
+ */
+
+#define OP0_L32I_N	0x8		/* load immediate narrow */
+#define OP0_S32I_N	0x9		/* store immediate narrow */
+#define OP1_SI_MASK	0x4		/* OP1 bit set for stores */
+#define OP1_SI_BIT	2		/* OP1 bit number for stores */
+
+#define OP1_L32I	0x2
+#define OP1_L16UI	0x1
+#define OP1_L16SI	0x9
+#define OP1_L32AI	0xb
+
+#define OP1_S32I	0x6
+#define OP1_S16I	0x5
+#define OP1_S32RI	0xf
+
+/*
+ * Entry condition:
+ *
+ *   a0:	trashed, original value saved on stack (PT_AREG0)
+ *   a1:	a1
+ *   a2:	new stack pointer, original in DEPC
+ *   a3:	dispatch table
+ *   depc:	a2, original value saved on stack (PT_DEPC)
+ *   excsave_1:	a3
+ *
+ *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
+ *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
+ */
+
+
+ENTRY(fast_unaligned)
+
+	/* Note: We don't expect the address to be aligned on a word
+	 *       boundary. After all, the processor generated that exception
+	 *       and it would be a hardware fault.
+	 */
+
+	/* Save some working register */
+
+	s32i	a4, a2, PT_AREG4
+	s32i	a5, a2, PT_AREG5
+	s32i	a6, a2, PT_AREG6
+	s32i	a7, a2, PT_AREG7
+	s32i	a8, a2, PT_AREG8
+
+	rsr	a0, DEPC
+	xsr	a3, EXCSAVE_1
+	s32i	a0, a2, PT_AREG2
+	s32i	a3, a2, PT_AREG3
+
+	/* Keep value of SAR in a0 */
+
+	rsr	a0, SAR
+	rsr	a8, EXCVADDR		# load unaligned memory address
+
+	/* Now, identify one of the following load/store instructions.
+	 *
+	 * The only possible danger of a double exception on the
+	 * following l32i instructions is kernel code in vmalloc
+	 * memory. The processor was just executing at the EPC_1
+	 * address, and indeed, already fetched the instruction.  That
+	 * guarantees a TLB mapping, which hasn't been replaced by
+	 * this unaligned exception handler that uses only static TLB
+	 * mappings. However, high-level interrupt handlers might
+	 * modify TLB entries, so for the generic case, we register a
+	 * TABLE_FIXUP handler here, too.
+	 */
+
+	/* a3...a6 saved on stack, a2 = SP */
+
+	/* Extract the instruction that caused the unaligned access. */
+
+	rsr	a7, EPC_1	# load exception address
+	movi	a3, ~3
+	and	a3, a3, a7	# mask lower bits
+
+	l32i	a4, a3, 0	# load 2 words
+	l32i	a5, a3, 4
+
+	__ssa8	a7
+	__src_b	a4, a4, a5	# a4 has the instruction
+
+	/* Analyze the instruction (load or store?). */
+
+	extui	a5, a4, INSN_OP0, 4	# get insn.op0 nibble
+
+#if XCHAL_HAVE_DENSITY
+	_beqi	a5, OP0_L32I_N, .Lload	# L32I.N, jump
+	addi	a6, a5, -OP0_S32I_N
+	_beqz	a6, .Lstore		# S32I.N, do a store
+#endif
+	/* 'store indicator bit' not set, jump */
+	_bbci.l	a4, OP1_SI_BIT + INSN_OP1, .Lload
+
+	/* Store: Jump to table entry to get the value in the source register.*/
+
+.Lstore:movi	a5, .Lstore_table	# table
+	extui	a6, a4, INSN_T, 4	# get source register
+	addx8	a5, a6, a5
+	jx	a5			# jump into table
+
+	/* Invalid instruction, CRITICAL! */
+.Linvalid_instruction_load:
+	j	.Linvalid_instruction
+
+	/* Load: Load memory address. */
+
+.Lload: movi	a3, ~3
+	and	a3, a3, a8		# align memory address
+
+	__ssa8	a8
+#ifdef UNALIGNED_USER_EXCEPTION
+	addi	a3, a3, 8
+	l32e	a5, a3, -8
+	l32e	a6, a3, -4
+#else
+	l32i	a5, a3, 0
+	l32i	a6, a3, 4
+#endif
+	__src_b	a3, a5, a6		# a3 has the data word
+
+#if XCHAL_HAVE_DENSITY
+	addi	a7, a7, 2		# increment PC (assume 16-bit insn)
+
+	extui	a5, a4, INSN_OP0, 4
+	_beqi	a5, OP0_L32I_N, 1f	# l32i.n: jump
+
+	addi	a7, a7, 1
+#else
+	addi	a7, a7, 3
+#endif
+
+	extui	a5, a4, INSN_OP1, 4
+	_beqi	a5, OP1_L32I, 1f	# l32i: jump
+
+	extui	a3, a3, 0, 16		# extract lower 16 bits
+	_beqi	a5, OP1_L16UI, 1f
+	addi	a5, a5, -OP1_L16SI
+	_bnez	a5, .Linvalid_instruction_load
+
+	/* sign extend value */
+
+	slli	a3, a3, 16
+	srai	a3, a3, 16
+
+	/* Set target register. */
+
+1:
+
+#if XCHAL_HAVE_LOOPS
+	rsr	a5, LEND		# check if we reached LEND
+	bne	a7, a5, 1f
+	rsr	a5, LCOUNT		# and LCOUNT != 0
+	beqz	a5, 1f
+	addi	a5, a5, -1		# decrement LCOUNT and set
+	rsr	a7, LBEG		# set PC to LBEGIN
+	wsr	a5, LCOUNT
+#endif
+
+1:	wsr	a7, EPC_1		# skip load instruction
+	extui	a4, a4, INSN_T, 4	# extract target register
+	movi	a5, .Lload_table
+	addx8	a4, a4, a5
+	jx	a4			# jump to entry for target register
+
+	.align	8
+.Lload_table:
+	s32i	a3, a2, PT_AREG0;	_j .Lexit;	.align 8
+	mov	a1, a3;			_j .Lexit;	.align 8 # fishy??
+	s32i	a3, a2, PT_AREG2;	_j .Lexit;	.align 8
+	s32i	a3, a2, PT_AREG3;	_j .Lexit;	.align 8
+	s32i	a3, a2, PT_AREG4;	_j .Lexit;	.align 8
+	s32i	a3, a2, PT_AREG5;	_j .Lexit;	.align 8
+	s32i	a3, a2, PT_AREG6;	_j .Lexit;	.align 8
+	s32i	a3, a2, PT_AREG7;	_j .Lexit;	.align 8
+	s32i	a3, a2, PT_AREG8;	_j .Lexit;	.align 8
+	mov	a9, a3		;	_j .Lexit;	.align 8
+	mov	a10, a3		;	_j .Lexit;	.align 8
+	mov	a11, a3		;	_j .Lexit;	.align 8
+	mov	a12, a3		;	_j .Lexit;	.align 8
+	mov	a13, a3		;	_j .Lexit;	.align 8
+	mov	a14, a3		;	_j .Lexit;	.align 8
+	mov	a15, a3		;	_j .Lexit;	.align 8
+
+.Lstore_table:
+	l32i	a3, a2, PT_AREG0;	_j 1f;	.align 8
+	mov	a3, a1;			_j 1f;	.align 8	# fishy??
+	l32i	a3, a2, PT_AREG2;	_j 1f;	.align 8
+	l32i	a3, a2, PT_AREG3;	_j 1f;	.align 8
+	l32i	a3, a2, PT_AREG4;	_j 1f;	.align 8
+	l32i	a3, a2, PT_AREG5;	_j 1f;	.align 8
+	l32i	a3, a2, PT_AREG6;	_j 1f;	.align 8
+	l32i	a3, a2, PT_AREG7;	_j 1f;	.align 8
+	l32i	a3, a2, PT_AREG8;	_j 1f;	.align 8
+	mov	a3, a9		;	_j 1f;	.align 8
+	mov	a3, a10		;	_j 1f;	.align 8
+	mov	a3, a11		;	_j 1f;	.align 8
+	mov	a3, a12		;	_j 1f;	.align 8
+	mov	a3, a13		;	_j 1f;	.align 8
+	mov	a3, a14		;	_j 1f;	.align 8
+	mov	a3, a15		;	_j 1f;	.align 8
+
+1: 	# a7: instruction pointer, a4: instruction, a3: value
+
+	movi	a6, 0			# mask: ffffffff:00000000
+
+#if XCHAL_HAVE_DENSITY
+	addi	a7, a7, 2		# incr. PC,assume 16-bit instruction
+
+	extui	a5, a4, INSN_OP0, 4	# extract OP0
+	addi	a5, a5, -OP0_S32I_N
+	_beqz	a5, 1f			# s32i.n: jump
+
+	addi	a7, a7, 1		# increment PC, 32-bit instruction
+#else
+	addi	a7, a7, 3		# increment PC, 32-bit instruction
+#endif
+
+	extui	a5, a4, INSN_OP1, 4	# extract OP1
+	_beqi	a5, OP1_S32I, 1f	# jump if 32 bit store
+	_bnei	a5, OP1_S16I, .Linvalid_instruction_store
+
+	movi	a5, -1
+	__extl	a3, a3			# get 16-bit value
+	__exth	a6, a5			# get 16-bit mask ffffffff:ffff0000
+
+	/* Get memory address */
+
+1:
+#if XCHAL_HAVE_LOOPS
+	rsr	a4, LEND		# check if we reached LEND
+	bne	a7, a4, 1f
+	rsr	a4, LCOUNT		# and LCOUNT != 0
+	beqz	a4, 1f
+	addi	a4, a4, -1		# decrement LCOUNT and set
+	rsr	a7, LBEG		# set PC to LBEGIN
+	wsr	a4, LCOUNT
+#endif
+
+1:	wsr	a7, EPC_1		# skip store instruction
+	movi	a4, ~3
+	and	a4, a4, a8		# align memory address
+
+	/* Insert value into memory */
+
+	movi	a5, -1			# mask: ffffffff:XXXX0000
+#ifdef UNALIGNED_USER_EXCEPTION
+	addi	a4, a4, 8
+#endif
+
+	__ssa8r a8
+	__src_b	a7, a5, a6		# lo-mask  F..F0..0 (BE) 0..0F..F (LE)
+	__src_b	a6, a6, a5		# hi-mask  0..0F..F (BE) F..F0..0 (LE)
+#ifdef UNALIGNED_USER_EXCEPTION
+	l32e	a5, a4, -8
+#else
+	l32i	a5, a4, 0		# load lower address word
+#endif
+	and	a5, a5, a7		# mask
+	__sh	a7, a3 			# shift value
+	or	a5, a5, a7		# or with original value
+#ifdef UNALIGNED_USER_EXCEPTION
+	s32e	a5, a4, -8
+	l32e	a7, a4, -4
+#else
+	s32i	a5, a4, 0		# store
+	l32i	a7, a4, 4		# same for upper address word
+#endif
+	__sl	a5, a3
+	and	a6, a7, a6
+	or	a6, a6, a5
+#ifdef UNALIGNED_USER_EXCEPTION
+	s32e	a6, a4, -4
+#else
+	s32i	a6, a4, 4
+#endif
+
+	/* Done. restore stack and return */
+
+.Lexit:
+	movi	a4, 0
+	rsr	a3, EXCSAVE_1
+	s32i	a4, a3, EXC_TABLE_FIXUP
+
+	/* Restore working register */
+
+	l32i	a8, a2, PT_AREG8
+	l32i	a7, a2, PT_AREG7
+	l32i	a6, a2, PT_AREG6
+	l32i	a5, a2, PT_AREG5
+	l32i	a4, a2, PT_AREG4
+	l32i	a3, a2, PT_AREG3
+
+	/* restore SAR and return */
+
+	wsr	a0, SAR
+	l32i	a0, a2, PT_AREG0
+	l32i	a2, a2, PT_AREG2
+	rfe
+
+	/* We cannot handle this exception. */
+
+	.extern _kernel_exception
+.Linvalid_instruction_store:
+.Linvalid_instruction:
+
+	/* Restore a4...a8 and SAR, set SP, and jump to default exception. */
+
+	l32i	a8, a2, PT_AREG8
+	l32i	a7, a2, PT_AREG7
+	l32i	a6, a2, PT_AREG6
+	l32i	a5, a2, PT_AREG5
+	l32i	a4, a2, PT_AREG4
+	wsr	a0, SAR
+	mov	a1, a2
+
+	rsr	a0, PS
+        bbsi.l  a2, PS_UM_BIT, 1f     # jump if user mode
+
+	movi	a0, _kernel_exception
+	jx	a0
+
+1:	movi	a0, _user_exception
+	jx	a0
+
+
+#endif /* XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION */
+
diff --git a/arch/xtensa/kernel/asm-offsets.c b/arch/xtensa/kernel/asm-offsets.c
new file mode 100644
index 00000000..7dc3f915
--- /dev/null
+++ b/arch/xtensa/kernel/asm-offsets.c
@@ -0,0 +1,111 @@
+/*
+ * arch/xtensa/kernel/asm-offsets.c
+ *
+ * Generates definitions from c-type structures used by assembly sources.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Tensilica Inc.
+ *
+ * Chris Zankel <chris@zankel.net>
+ */
+
+#include <asm/processor.h>
+#include <asm/coprocessor.h>
+
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <linux/thread_info.h>
+#include <linux/ptrace.h>
+#include <linux/mm.h>
+#include <linux/kbuild.h>
+
+#include <asm/ptrace.h>
+#include <asm/uaccess.h>
+
+int main(void)
+{
+	/* struct pt_regs */
+	DEFINE(PT_PC, offsetof (struct pt_regs, pc));
+	DEFINE(PT_PS, offsetof (struct pt_regs, ps));
+	DEFINE(PT_DEPC, offsetof (struct pt_regs, depc));
+	DEFINE(PT_EXCCAUSE, offsetof (struct pt_regs, exccause));
+	DEFINE(PT_EXCVADDR, offsetof (struct pt_regs, excvaddr));
+	DEFINE(PT_DEBUGCAUSE, offsetof (struct pt_regs, debugcause));
+	DEFINE(PT_WMASK, offsetof (struct pt_regs, wmask));
+	DEFINE(PT_LBEG, offsetof (struct pt_regs, lbeg));
+	DEFINE(PT_LEND, offsetof (struct pt_regs, lend));
+	DEFINE(PT_LCOUNT, offsetof (struct pt_regs, lcount));
+	DEFINE(PT_SAR, offsetof (struct pt_regs, sar));
+	DEFINE(PT_ICOUNTLEVEL, offsetof (struct pt_regs, icountlevel));
+	DEFINE(PT_SYSCALL, offsetof (struct pt_regs, syscall));
+	DEFINE(PT_AREG, offsetof (struct pt_regs, areg[0]));
+	DEFINE(PT_AREG0, offsetof (struct pt_regs, areg[0]));
+	DEFINE(PT_AREG1, offsetof (struct pt_regs, areg[1]));
+	DEFINE(PT_AREG2, offsetof (struct pt_regs, areg[2]));
+	DEFINE(PT_AREG3, offsetof (struct pt_regs, areg[3]));
+	DEFINE(PT_AREG4, offsetof (struct pt_regs, areg[4]));
+	DEFINE(PT_AREG5, offsetof (struct pt_regs, areg[5]));
+	DEFINE(PT_AREG6, offsetof (struct pt_regs, areg[6]));
+	DEFINE(PT_AREG7, offsetof (struct pt_regs, areg[7]));
+	DEFINE(PT_AREG8, offsetof (struct pt_regs, areg[8]));
+	DEFINE(PT_AREG9, offsetof (struct pt_regs, areg[9]));
+	DEFINE(PT_AREG10, offsetof (struct pt_regs, areg[10]));
+	DEFINE(PT_AREG11, offsetof (struct pt_regs, areg[11]));
+	DEFINE(PT_AREG12, offsetof (struct pt_regs, areg[12]));
+	DEFINE(PT_AREG13, offsetof (struct pt_regs, areg[13]));
+	DEFINE(PT_AREG14, offsetof (struct pt_regs, areg[14]));
+	DEFINE(PT_AREG15, offsetof (struct pt_regs, areg[15]));
+	DEFINE(PT_WINDOWBASE, offsetof (struct pt_regs, windowbase));
+	DEFINE(PT_WINDOWSTART, offsetof(struct pt_regs, windowstart));
+	DEFINE(PT_SIZE, sizeof(struct pt_regs));
+	DEFINE(PT_AREG_END, offsetof (struct pt_regs, areg[XCHAL_NUM_AREGS]));
+	DEFINE(PT_USER_SIZE, offsetof(struct pt_regs, areg[XCHAL_NUM_AREGS]));
+	DEFINE(PT_XTREGS_OPT, offsetof(struct pt_regs, xtregs_opt));
+	DEFINE(XTREGS_OPT_SIZE, sizeof(xtregs_opt_t));
+
+	/* struct task_struct */
+	DEFINE(TASK_PTRACE, offsetof (struct task_struct, ptrace));
+	DEFINE(TASK_MM, offsetof (struct task_struct, mm));
+	DEFINE(TASK_ACTIVE_MM, offsetof (struct task_struct, active_mm));
+	DEFINE(TASK_PID, offsetof (struct task_struct, pid));
+	DEFINE(TASK_THREAD, offsetof (struct task_struct, thread));
+	DEFINE(TASK_THREAD_INFO, offsetof (struct task_struct, stack));
+	DEFINE(TASK_STRUCT_SIZE, sizeof (struct task_struct));
+
+	/* struct thread_info (offset from start_struct) */
+	DEFINE(THREAD_RA, offsetof (struct task_struct, thread.ra));
+	DEFINE(THREAD_SP, offsetof (struct task_struct, thread.sp));
+	DEFINE(THREAD_CPENABLE, offsetof (struct thread_info, cpenable));
+#if XTENSA_HAVE_COPROCESSORS
+	DEFINE(THREAD_XTREGS_CP0, offsetof (struct thread_info, xtregs_cp));
+	DEFINE(THREAD_XTREGS_CP1, offsetof (struct thread_info, xtregs_cp));
+	DEFINE(THREAD_XTREGS_CP2, offsetof (struct thread_info, xtregs_cp));
+	DEFINE(THREAD_XTREGS_CP3, offsetof (struct thread_info, xtregs_cp));
+	DEFINE(THREAD_XTREGS_CP4, offsetof (struct thread_info, xtregs_cp));
+	DEFINE(THREAD_XTREGS_CP5, offsetof (struct thread_info, xtregs_cp));
+	DEFINE(THREAD_XTREGS_CP6, offsetof (struct thread_info, xtregs_cp));
+	DEFINE(THREAD_XTREGS_CP7, offsetof (struct thread_info, xtregs_cp));
+#endif
+	DEFINE(THREAD_XTREGS_USER, offsetof (struct thread_info, xtregs_user));
+	DEFINE(XTREGS_USER_SIZE, sizeof(xtregs_user_t));
+	DEFINE(THREAD_CURRENT_DS, offsetof (struct task_struct, thread.current_ds));
+
+	/* struct mm_struct */
+	DEFINE(MM_USERS, offsetof(struct mm_struct, mm_users));
+	DEFINE(MM_PGD, offsetof (struct mm_struct, pgd));
+	DEFINE(MM_CONTEXT, offsetof (struct mm_struct, context));
+
+	/* struct page */
+	DEFINE(PAGE_FLAGS, offsetof(struct page, flags));
+
+	/* constants */
+	DEFINE(_CLONE_VM, CLONE_VM);
+	DEFINE(_CLONE_UNTRACED, CLONE_UNTRACED);
+	DEFINE(PG_ARCH_1, PG_arch_1);
+
+	return 0;
+}
+
diff --git a/arch/xtensa/kernel/coprocessor.S b/arch/xtensa/kernel/coprocessor.S
new file mode 100644
index 00000000..2bc1e145
--- /dev/null
+++ b/arch/xtensa/kernel/coprocessor.S
@@ -0,0 +1,335 @@
+/*
+ * arch/xtensa/kernel/coprocessor.S
+ *
+ * Xtensa processor configuration-specific table of coprocessor and
+ * other custom register layout information.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 - 2007 Tensilica Inc.
+ */
+
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/processor.h>
+#include <asm/coprocessor.h>
+#include <asm/thread_info.h>
+#include <asm/uaccess.h>
+#include <asm/unistd.h>
+#include <asm/ptrace.h>
+#include <asm/current.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/signal.h>
+#include <asm/tlbflush.h>
+
+/*
+ * Entry condition:
+ *
+ *   a0:	trashed, original value saved on stack (PT_AREG0)
+ *   a1:	a1
+ *   a2:	new stack pointer, original in DEPC
+ *   a3:	dispatch table
+ *   depc:	a2, original value saved on stack (PT_DEPC)
+ *   excsave_1:	a3
+ *
+ *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
+ *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
+ */
+
+/* IO protection is currently unsupported. */
+
+ENTRY(fast_io_protect)
+	wsr	a0, EXCSAVE_1
+	movi	a0, unrecoverable_exception
+	callx0	a0
+
+#if XTENSA_HAVE_COPROCESSORS
+
+/*
+ * Macros for lazy context switch. 
+ */
+
+#define SAVE_CP_REGS(x)							\
+	.align 4;							\
+	.Lsave_cp_regs_cp##x:						\
+	.if XTENSA_HAVE_COPROCESSOR(x);					\
+		xchal_cp##x##_store a2 a4 a5 a6 a7;			\
+	.endif;								\
+	jx	a0
+
+#define SAVE_CP_REGS_TAB(x)						\
+	.if XTENSA_HAVE_COPROCESSOR(x);					\
+		.long .Lsave_cp_regs_cp##x - .Lsave_cp_regs_jump_table;	\
+	.else;								\
+		.long 0;						\
+	.endif;								\
+	.long THREAD_XTREGS_CP##x
+
+
+#define LOAD_CP_REGS(x)							\
+	.align 4;							\
+	.Lload_cp_regs_cp##x:						\
+	.if XTENSA_HAVE_COPROCESSOR(x);					\
+		xchal_cp##x##_load a2 a4 a5 a6 a7;			\
+	.endif;								\
+	jx	a0
+
+#define LOAD_CP_REGS_TAB(x)						\
+	.if XTENSA_HAVE_COPROCESSOR(x);					\
+		.long .Lload_cp_regs_cp##x - .Lload_cp_regs_jump_table; \
+	.else;								\
+		.long 0;						\
+	.endif;								\
+	.long THREAD_XTREGS_CP##x
+
+	SAVE_CP_REGS(0)
+	SAVE_CP_REGS(1)
+	SAVE_CP_REGS(2)
+	SAVE_CP_REGS(3)
+	SAVE_CP_REGS(4)
+	SAVE_CP_REGS(5)
+	SAVE_CP_REGS(6)
+	SAVE_CP_REGS(7)
+
+	LOAD_CP_REGS(0)
+	LOAD_CP_REGS(1)
+	LOAD_CP_REGS(2)
+	LOAD_CP_REGS(3)
+	LOAD_CP_REGS(4)
+	LOAD_CP_REGS(5)
+	LOAD_CP_REGS(6)
+	LOAD_CP_REGS(7)
+
+	.align 4
+.Lsave_cp_regs_jump_table:
+	SAVE_CP_REGS_TAB(0)
+	SAVE_CP_REGS_TAB(1)
+	SAVE_CP_REGS_TAB(2)
+	SAVE_CP_REGS_TAB(3)
+	SAVE_CP_REGS_TAB(4)
+	SAVE_CP_REGS_TAB(5)
+	SAVE_CP_REGS_TAB(6)
+	SAVE_CP_REGS_TAB(7)
+
+.Lload_cp_regs_jump_table:
+	LOAD_CP_REGS_TAB(0)
+	LOAD_CP_REGS_TAB(1)
+	LOAD_CP_REGS_TAB(2)
+	LOAD_CP_REGS_TAB(3)
+	LOAD_CP_REGS_TAB(4)
+	LOAD_CP_REGS_TAB(5)
+	LOAD_CP_REGS_TAB(6)
+	LOAD_CP_REGS_TAB(7)
+
+/*
+ * coprocessor_save(buffer, index) 
+ *                    a2      a3
+ * coprocessor_load(buffer, index)
+ *                    a2      a3
+ *
+ * Save or load coprocessor registers for coprocessor 'index'. 
+ * The register values are saved to or loaded from them 'buffer' address.
+ *
+ * Note that these functions don't update the coprocessor_owner information!
+ *
+ */
+
+ENTRY(coprocessor_save)
+	entry	a1, 32
+	s32i	a0, a1, 0
+	movi	a0, .Lsave_cp_regs_jump_table
+	addx8	a3, a3, a0
+	l32i	a3, a3, 0
+	beqz	a3, 1f
+	add	a0, a0, a3
+	callx0	a0
+1:	l32i	a0, a1, 0
+	retw
+
+ENTRY(coprocessor_load)
+	entry	a1, 32
+	s32i	a0, a1, 0
+	movi	a0, .Lload_cp_regs_jump_table
+	addx4	a3, a3, a0
+	l32i	a3, a3, 0
+	beqz	a3, 1f
+	add	a0, a0, a3
+	callx0	a0
+1:	l32i	a0, a1, 0
+	retw
+
+/*
+ * coprocessor_flush(struct task_info*, index) 
+ *                             a2        a3
+ * coprocessor_restore(struct task_info*, index)
+ *                              a2         a3
+ *
+ * Save or load coprocessor registers for coprocessor 'index'. 
+ * The register values are saved to or loaded from the coprocessor area 
+ * inside the task_info structure.
+ *
+ * Note that these functions don't update the coprocessor_owner information!
+ *
+ */
+
+
+ENTRY(coprocessor_flush)
+	entry	a1, 32
+	s32i	a0, a1, 0
+	movi	a0, .Lsave_cp_regs_jump_table
+	addx8	a3, a3, a0
+	l32i	a4, a3, 4
+	l32i	a3, a3, 0
+	add	a2, a2, a4
+	beqz	a3, 1f
+	add	a0, a0, a3
+	callx0	a0
+1:	l32i	a0, a1, 0
+	retw
+
+ENTRY(coprocessor_restore)
+	entry	a1, 32
+	s32i	a0, a1, 0
+	movi	a0, .Lload_cp_regs_jump_table
+	addx4	a3, a3, a0
+	l32i	a4, a3, 4
+	l32i	a3, a3, 0
+	add	a2, a2, a4
+	beqz	a3, 1f
+	add	a0, a0, a3
+	callx0	a0
+1:	l32i	a0, a1, 0
+	retw
+
+/*
+ * Entry condition:
+ *
+ *   a0:	trashed, original value saved on stack (PT_AREG0)
+ *   a1:	a1
+ *   a2:	new stack pointer, original in DEPC
+ *   a3:	dispatch table
+ *   depc:	a2, original value saved on stack (PT_DEPC)
+ *   excsave_1:	a3
+ *
+ *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
+ *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
+ */
+
+ENTRY(fast_coprocessor_double)
+	wsr	a0, EXCSAVE_1
+	movi	a0, unrecoverable_exception
+	callx0	a0
+
+
+ENTRY(fast_coprocessor)
+
+	/* Save remaining registers a1-a3 and SAR */
+
+	xsr	a3, EXCSAVE_1
+	s32i	a3, a2, PT_AREG3
+	rsr	a3, SAR
+	s32i	a1, a2, PT_AREG1
+	s32i	a3, a2, PT_SAR
+	mov	a1, a2
+	rsr	a2, DEPC
+	s32i	a2, a1, PT_AREG2
+
+	/*
+	 * The hal macros require up to 4 temporary registers. We use a3..a6.
+	 */
+
+	s32i	a4, a1, PT_AREG4
+	s32i	a5, a1, PT_AREG5
+	s32i	a6, a1, PT_AREG6
+
+	/* Find coprocessor number. Subtract first CP EXCCAUSE from EXCCAUSE */
+
+	rsr	a3, EXCCAUSE
+	addi	a3, a3, -EXCCAUSE_COPROCESSOR0_DISABLED
+
+	/* Set corresponding CPENABLE bit -> (sar:cp-index, a3: 1<<cp-index)*/
+
+	ssl	a3			# SAR: 32 - coprocessor_number
+	movi	a2, 1
+	rsr	a0, CPENABLE
+	sll	a2, a2
+	or	a0, a0, a2
+	wsr	a0, CPENABLE
+	rsync
+
+	/* Retrieve previous owner. (a3 still holds CP number) */
+
+	movi	a0, coprocessor_owner	# list of owners
+	addx4	a0, a3, a0		# entry for CP
+	l32i	a4, a0, 0
+
+	beqz	a4, 1f			# skip 'save' if no previous owner
+
+	/* Disable coprocessor for previous owner. (a2 = 1 << CP number) */
+
+	l32i	a5, a4, THREAD_CPENABLE
+	xor	a5, a5, a2		# (1 << cp-id) still in a2
+	s32i	a5, a4, THREAD_CPENABLE
+
+	/*
+	 * Get context save area and 'call' save routine. 
+	 * (a4 still holds previous owner (thread_info), a3 CP number)
+	 */
+
+	movi	a5, .Lsave_cp_regs_jump_table
+	movi	a0, 2f			# a0: 'return' address
+	addx8	a3, a3, a5		# a3: coprocessor number
+	l32i	a2, a3, 4		# a2: xtregs offset
+	l32i	a3, a3, 0		# a3: jump offset
+	add	a2, a2, a4
+	add	a4, a3, a5		# a4: address of save routine
+	jx	a4
+
+	/* Note that only a0 and a1 were preserved. */
+
+2:	rsr	a3, EXCCAUSE
+	addi	a3, a3, -EXCCAUSE_COPROCESSOR0_DISABLED
+	movi	a0, coprocessor_owner
+	addx4	a0, a3, a0
+
+	/* Set new 'owner' (a0 points to the CP owner, a3 contains the CP nr) */
+
+1:	GET_THREAD_INFO (a4, a1)
+	s32i	a4, a0, 0
+
+	/* Get context save area and 'call' load routine. */
+
+	movi	a5, .Lload_cp_regs_jump_table
+	movi	a0, 1f
+	addx8	a3, a3, a5
+	l32i	a2, a3, 4		# a2: xtregs offset
+	l32i	a3, a3, 0		# a3: jump offset
+	add	a2, a2, a4
+	add	a4, a3, a5
+	jx	a4
+
+	/* Restore all registers and return from exception handler. */
+
+1:	l32i	a6, a1, PT_AREG6
+	l32i	a5, a1, PT_AREG5
+	l32i	a4, a1, PT_AREG4
+
+	l32i	a0, a1, PT_SAR
+	l32i	a3, a1, PT_AREG3
+	l32i	a2, a1, PT_AREG2
+	wsr	a0, SAR
+	l32i	a0, a1, PT_AREG0
+	l32i	a1, a1, PT_AREG1
+
+	rfe
+
+	.data
+ENTRY(coprocessor_owner)
+	.fill XCHAL_CP_MAX, 4, 0
+
+#endif /* XTENSA_HAVE_COPROCESSORS */
+
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
new file mode 100644
index 00000000..6223f334
--- /dev/null
+++ b/arch/xtensa/kernel/entry.S
@@ -0,0 +1,1960 @@
+/*
+ * arch/xtensa/kernel/entry.S
+ *
+ * Low-level exception handling
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004-2007 by Tensilica Inc.
+ *
+ * Chris Zankel <chris@zankel.net>
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/processor.h>
+#include <asm/coprocessor.h>
+#include <asm/thread_info.h>
+#include <asm/uaccess.h>
+#include <asm/unistd.h>
+#include <asm/ptrace.h>
+#include <asm/current.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/signal.h>
+#include <asm/tlbflush.h>
+#include <variant/tie-asm.h>
+
+/* Unimplemented features. */
+
+#undef KERNEL_STACK_OVERFLOW_CHECK
+#undef PREEMPTIBLE_KERNEL
+#undef ALLOCA_EXCEPTION_IN_IRAM
+
+/* Not well tested.
+ *
+ * - fast_coprocessor
+ */
+
+/*
+ * Macro to find first bit set in WINDOWBASE from the left + 1
+ *
+ * 100....0 -> 1
+ * 010....0 -> 2
+ * 000....1 -> WSBITS
+ */
+
+	.macro ffs_ws bit mask
+
+#if XCHAL_HAVE_NSA
+	nsau    \bit, \mask			# 32-WSBITS ... 31 (32 iff 0)
+	addi    \bit, \bit, WSBITS - 32 + 1   	# uppest bit set -> return 1
+#else
+	movi    \bit, WSBITS
+#if WSBITS > 16
+	_bltui  \mask, 0x10000, 99f
+	addi    \bit, \bit, -16
+	extui   \mask, \mask, 16, 16
+#endif
+#if WSBITS > 8
+99:	_bltui  \mask, 0x100, 99f
+	addi    \bit, \bit, -8
+	srli    \mask, \mask, 8
+#endif
+99:	_bltui  \mask, 0x10, 99f
+	addi    \bit, \bit, -4
+	srli    \mask, \mask, 4
+99:	_bltui  \mask, 0x4, 99f
+	addi    \bit, \bit, -2
+	srli    \mask, \mask, 2
+99:	_bltui  \mask, 0x2, 99f
+	addi    \bit, \bit, -1
+99:
+
+#endif
+	.endm
+
+/* ----------------- DEFAULT FIRST LEVEL EXCEPTION HANDLERS ----------------- */
+
+/*
+ * First-level exception handler for user exceptions.
+ * Save some special registers, extra states and all registers in the AR
+ * register file that were in use in the user task, and jump to the common
+ * exception code.
+ * We save SAR (used to calculate WMASK), and WB and WS (we don't have to
+ * save them for kernel exceptions).
+ *
+ * Entry condition for user_exception:
+ *
+ *   a0:	trashed, original value saved on stack (PT_AREG0)
+ *   a1:	a1
+ *   a2:	new stack pointer, original value in depc
+ *   a3:	dispatch table
+ *   depc:	a2, original value saved on stack (PT_DEPC)
+ *   excsave1:	a3
+ *
+ *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
+ *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
+ *
+ * Entry condition for _user_exception:
+ *
+ *   a0-a3 and depc have been saved to PT_AREG0...PT_AREG3 and PT_DEPC
+ *   excsave has been restored, and
+ *   stack pointer (a1) has been set.
+ *
+ * Note: _user_exception might be at an odd address. Don't use call0..call12
+ */
+
+ENTRY(user_exception)
+
+	/* Save a2, a3, and depc, restore excsave_1 and set SP. */
+
+	xsr	a3, EXCSAVE_1
+	rsr	a0, DEPC
+	s32i	a1, a2, PT_AREG1
+	s32i	a0, a2, PT_AREG2
+	s32i	a3, a2, PT_AREG3
+	mov	a1, a2
+
+	.globl _user_exception
+_user_exception:
+
+	/* Save SAR and turn off single stepping */
+
+	movi	a2, 0
+	rsr	a3, SAR
+	xsr	a2, ICOUNTLEVEL
+	s32i	a3, a1, PT_SAR
+	s32i	a2, a1, PT_ICOUNTLEVEL
+
+	/* Rotate ws so that the current windowbase is at bit0. */
+	/* Assume ws = xxwww1yyyy. Rotate ws right, so that a2 = yyyyxxwww1 */
+
+	rsr	a2, WINDOWBASE
+	rsr	a3, WINDOWSTART
+	ssr	a2
+	s32i	a2, a1, PT_WINDOWBASE
+	s32i	a3, a1, PT_WINDOWSTART
+	slli	a2, a3, 32-WSBITS
+	src	a2, a3, a2
+	srli	a2, a2, 32-WSBITS
+	s32i	a2, a1, PT_WMASK	# needed for restoring registers
+
+	/* Save only live registers. */
+
+	_bbsi.l	a2, 1, 1f
+	s32i	a4, a1, PT_AREG4
+	s32i	a5, a1, PT_AREG5
+	s32i	a6, a1, PT_AREG6
+	s32i	a7, a1, PT_AREG7
+	_bbsi.l	a2, 2, 1f
+	s32i	a8, a1, PT_AREG8
+	s32i	a9, a1, PT_AREG9
+	s32i	a10, a1, PT_AREG10
+	s32i	a11, a1, PT_AREG11
+	_bbsi.l	a2, 3, 1f
+	s32i	a12, a1, PT_AREG12
+	s32i	a13, a1, PT_AREG13
+	s32i	a14, a1, PT_AREG14
+	s32i	a15, a1, PT_AREG15
+	_bnei	a2, 1, 1f		# only one valid frame?
+
+	/* Only one valid frame, skip saving regs. */
+
+	j	2f
+
+	/* Save the remaining registers.
+	 * We have to save all registers up to the first '1' from
+	 * the right, except the current frame (bit 0).
+	 * Assume a2 is:  001001000110001
+	 * All register frames starting from the top field to the marked '1'
+	 * must be saved.
+	 */
+
+1:	addi	a3, a2, -1		# eliminate '1' in bit 0: yyyyxxww0
+	neg	a3, a3			# yyyyxxww0 -> YYYYXXWW1+1
+	and	a3, a3, a2		# max. only one bit is set
+
+	/* Find number of frames to save */
+
+	ffs_ws	a0, a3			# number of frames to the '1' from left
+
+	/* Store information into WMASK:
+	 * bits 0..3: xxx1 masked lower 4 bits of the rotated windowstart,
+	 * bits 4...: number of valid 4-register frames
+	 */
+
+	slli	a3, a0, 4		# number of frames to save in bits 8..4
+	extui	a2, a2, 0, 4		# mask for the first 16 registers
+	or	a2, a3, a2
+	s32i	a2, a1, PT_WMASK	# needed when we restore the reg-file
+
+	/* Save 4 registers at a time */
+
+1:	rotw	-1
+	s32i	a0, a5, PT_AREG_END - 16
+	s32i	a1, a5, PT_AREG_END - 12
+	s32i	a2, a5, PT_AREG_END - 8
+	s32i	a3, a5, PT_AREG_END - 4
+	addi	a0, a4, -1
+	addi	a1, a5, -16
+	_bnez	a0, 1b
+
+	/* WINDOWBASE still in SAR! */
+
+	rsr	a2, SAR			# original WINDOWBASE
+	movi	a3, 1
+	ssl	a2
+	sll	a3, a3
+	wsr	a3, WINDOWSTART		# set corresponding WINDOWSTART bit
+	wsr	a2, WINDOWBASE		# and WINDOWSTART
+	rsync
+
+	/* We are back to the original stack pointer (a1) */
+
+2:	/* Now, jump to the common exception handler. */
+
+	j	common_exception
+
+
+/*
+ * First-level exit handler for kernel exceptions
+ * Save special registers and the live window frame.
+ * Note: Even though we changes the stack pointer, we don't have to do a
+ *	 MOVSP here, as we do that when we return from the exception.
+ *	 (See comment in the kernel exception exit code)
+ *
+ * Entry condition for kernel_exception:
+ *
+ *   a0:	trashed, original value saved on stack (PT_AREG0)
+ *   a1:	a1
+ *   a2:	new stack pointer, original in DEPC
+ *   a3:	dispatch table
+ *   depc:	a2, original value saved on stack (PT_DEPC)
+ *   excsave_1:	a3
+ *
+ *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
+ *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
+ *
+ * Entry condition for _kernel_exception:
+ *
+ *   a0-a3 and depc have been saved to PT_AREG0...PT_AREG3 and PT_DEPC
+ *   excsave has been restored, and
+ *   stack pointer (a1) has been set.
+ *
+ * Note: _kernel_exception might be at an odd address. Don't use call0..call12
+ */
+
+ENTRY(kernel_exception)
+
+	/* Save a0, a2, a3, DEPC and set SP. */
+
+	xsr	a3, EXCSAVE_1		# restore a3, excsave_1
+	rsr	a0, DEPC		# get a2
+	s32i	a1, a2, PT_AREG1
+	s32i	a0, a2, PT_AREG2
+	s32i	a3, a2, PT_AREG3
+	mov	a1, a2
+
+	.globl _kernel_exception
+_kernel_exception:
+
+	/* Save SAR and turn off single stepping */
+
+	movi	a2, 0
+	rsr	a3, SAR
+	xsr	a2, ICOUNTLEVEL
+	s32i	a3, a1, PT_SAR
+	s32i	a2, a1, PT_ICOUNTLEVEL
+
+	/* Rotate ws so that the current windowbase is at bit0. */
+	/* Assume ws = xxwww1yyyy. Rotate ws right, so that a2 = yyyyxxwww1 */
+
+	rsr	a2, WINDOWBASE		# don't need to save these, we only
+	rsr	a3, WINDOWSTART		# need shifted windowstart: windowmask
+	ssr	a2
+	slli	a2, a3, 32-WSBITS
+	src	a2, a3, a2
+	srli	a2, a2, 32-WSBITS
+	s32i	a2, a1, PT_WMASK	# needed for kernel_exception_exit
+
+	/* Save only the live window-frame */
+
+	_bbsi.l	a2, 1, 1f
+	s32i	a4, a1, PT_AREG4
+	s32i	a5, a1, PT_AREG5
+	s32i	a6, a1, PT_AREG6
+	s32i	a7, a1, PT_AREG7
+	_bbsi.l	a2, 2, 1f
+	s32i	a8, a1, PT_AREG8
+	s32i	a9, a1, PT_AREG9
+	s32i	a10, a1, PT_AREG10
+	s32i	a11, a1, PT_AREG11
+	_bbsi.l	a2, 3, 1f
+	s32i	a12, a1, PT_AREG12
+	s32i	a13, a1, PT_AREG13
+	s32i	a14, a1, PT_AREG14
+	s32i	a15, a1, PT_AREG15
+
+1:
+
+#ifdef KERNEL_STACK_OVERFLOW_CHECK
+
+	/*  Stack overflow check, for debugging  */
+	extui	a2, a1, TASK_SIZE_BITS,XX
+	movi	a3, SIZE??
+	_bge	a2, a3, out_of_stack_panic
+
+#endif
+
+/*
+ * This is the common exception handler.
+ * We get here from the user exception handler or simply by falling through
+ * from the kernel exception handler.
+ * Save the remaining special registers, switch to kernel mode, and jump
+ * to the second-level exception handler.
+ *
+ */
+
+common_exception:
+
+	/* Save some registers, disable loops and clear the syscall flag. */
+
+	rsr	a2, DEBUGCAUSE
+	rsr	a3, EPC_1
+	s32i	a2, a1, PT_DEBUGCAUSE
+	s32i	a3, a1, PT_PC
+
+	movi	a2, -1
+	rsr	a3, EXCVADDR
+	s32i	a2, a1, PT_SYSCALL
+	movi	a2, 0
+	s32i	a3, a1, PT_EXCVADDR
+	xsr	a2, LCOUNT
+	s32i	a2, a1, PT_LCOUNT
+
+	/* It is now save to restore the EXC_TABLE_FIXUP variable. */
+
+	rsr	a0, EXCCAUSE
+	movi	a3, 0
+	rsr	a2, EXCSAVE_1
+	s32i	a0, a1, PT_EXCCAUSE
+	s32i	a3, a2, EXC_TABLE_FIXUP
+
+	/* All unrecoverable states are saved on stack, now, and a1 is valid,
+	 * so we can allow exceptions and interrupts (*) again.
+	 * Set PS(EXCM = 0, UM = 0, RING = 0, OWB = 0, WOE = 1, INTLEVEL = X)
+	 *
+	 * (*) We only allow interrupts if PS.INTLEVEL was not set to 1 before
+	 *     (interrupts disabled) and if this exception is not an interrupt.
+	 */
+
+	rsr	a3, PS
+	addi	a0, a0, -4
+	movi	a2, 1
+	extui	a3, a3, 0, 1		# a3 = PS.INTLEVEL[0]
+	moveqz	a3, a2, a0		# a3 = 1 iff interrupt exception
+	movi	a2, 1 << PS_WOE_BIT
+	or	a3, a3, a2
+	rsr	a0, EXCCAUSE
+	xsr	a3, PS
+
+	s32i	a3, a1, PT_PS		# save ps
+
+	/* Save LBEG, LEND */
+
+	rsr	a2, LBEG
+	rsr	a3, LEND
+	s32i	a2, a1, PT_LBEG
+	s32i	a3, a1, PT_LEND
+
+	/* Save optional registers. */
+
+	save_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT
+	
+	/* Go to second-level dispatcher. Set up parameters to pass to the
+	 * exception handler and call the exception handler.
+	 */
+
+	movi	a4, exc_table
+	mov	a6, a1			# pass stack frame
+	mov	a7, a0			# pass EXCCAUSE
+	addx4	a4, a0, a4
+	l32i	a4, a4, EXC_TABLE_DEFAULT		# load handler
+
+	/* Call the second-level handler */
+
+	callx4	a4
+
+	/* Jump here for exception exit */
+
+common_exception_return:
+
+	/* Jump if we are returning from kernel exceptions. */
+
+1:	l32i	a3, a1, PT_PS
+	_bbci.l	a3, PS_UM_BIT, 4f
+
+	/* Specific to a user exception exit:
+	 * We need to check some flags for signal handling and rescheduling,
+	 * and have to restore WB and WS, extra states, and all registers
+	 * in the register file that were in use in the user task.
+	 * Note that we don't disable interrupts here. 
+	 */
+
+	GET_THREAD_INFO(a2,a1)
+	l32i	a4, a2, TI_FLAGS
+
+	_bbsi.l	a4, TIF_NEED_RESCHED, 3f
+	_bbci.l	a4, TIF_SIGPENDING, 4f
+
+	l32i	a4, a1, PT_DEPC
+	bgeui	a4, VALID_DOUBLE_EXCEPTION_ADDRESS, 4f
+
+	/* Call do_signal() */
+
+	movi	a4, do_signal	# int do_signal(struct pt_regs*, sigset_t*)
+	mov	a6, a1
+	movi	a7, 0
+	callx4	a4
+	j	1b
+
+3:	/* Reschedule */
+
+	movi	a4, schedule	# void schedule (void)
+	callx4	a4
+	j	1b
+
+4:	/* Restore optional registers. */
+
+	load_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT
+
+	wsr	a3, PS		/* disable interrupts */
+
+	_bbci.l	a3, PS_UM_BIT, kernel_exception_exit
+
+user_exception_exit:
+
+	/* Restore the state of the task and return from the exception. */
+
+	/* Switch to the user thread WINDOWBASE. Save SP temporarily in DEPC */
+
+	l32i	a2, a1, PT_WINDOWBASE
+	l32i	a3, a1, PT_WINDOWSTART
+	wsr	a1, DEPC		# use DEPC as temp storage
+	wsr	a3, WINDOWSTART		# restore WINDOWSTART
+	ssr	a2			# preserve user's WB in the SAR
+	wsr	a2, WINDOWBASE		# switch to user's saved WB
+	rsync
+	rsr	a1, DEPC		# restore stack pointer
+	l32i	a2, a1, PT_WMASK	# register frames saved (in bits 4...9)
+	rotw	-1			# we restore a4..a7
+	_bltui	a6, 16, 1f		# only have to restore current window?
+
+	/* The working registers are a0 and a3.  We are restoring to
+	 * a4..a7.  Be careful not to destroy what we have just restored.
+	 * Note: wmask has the format YYYYM:
+	 *       Y: number of registers saved in groups of 4
+	 *       M: 4 bit mask of first 16 registers
+	 */
+
+	mov	a2, a6
+	mov	a3, a5
+
+2:	rotw	-1			# a0..a3 become a4..a7
+	addi	a3, a7, -4*4		# next iteration
+	addi	a2, a6, -16		# decrementing Y in WMASK
+	l32i	a4, a3, PT_AREG_END + 0
+	l32i	a5, a3, PT_AREG_END + 4
+	l32i	a6, a3, PT_AREG_END + 8
+	l32i	a7, a3, PT_AREG_END + 12
+	_bgeui	a2, 16, 2b
+
+	/* Clear unrestored registers (don't leak anything to user-land */
+
+1:	rsr	a0, WINDOWBASE
+	rsr	a3, SAR
+	sub	a3, a0, a3
+	beqz	a3, 2f
+	extui	a3, a3, 0, WBBITS
+
+1:	rotw	-1
+	addi	a3, a7, -1
+	movi	a4, 0
+	movi	a5, 0
+	movi	a6, 0
+	movi	a7, 0
+	bgei	a3, 1, 1b
+
+	/* We are back were we were when we started.
+	 * Note: a2 still contains WMASK (if we've returned to the original
+	 *	 frame where we had loaded a2), or at least the lower 4 bits
+	 *	 (if we have restored WSBITS-1 frames).
+	 */
+
+2:	j	common_exception_exit
+
+	/* This is the kernel exception exit.
+	 * We avoided to do a MOVSP when we entered the exception, but we
+	 * have to do it here.
+	 */
+
+kernel_exception_exit:
+
+#ifdef PREEMPTIBLE_KERNEL
+
+#ifdef CONFIG_PREEMPT
+
+	/*
+	 * Note: We've just returned from a call4, so we have
+	 * at least 4 addt'l regs.
+	 */
+
+	/* Check current_thread_info->preempt_count */
+
+	GET_THREAD_INFO(a2)
+	l32i	a3, a2, TI_PREEMPT
+	bnez	a3, 1f
+
+	l32i	a2, a2, TI_FLAGS
+
+1:
+
+#endif
+
+#endif
+
+	/* Check if we have to do a movsp.
+	 *
+	 * We only have to do a movsp if the previous window-frame has
+	 * been spilled to the *temporary* exception stack instead of the
+	 * task's stack. This is the case if the corresponding bit in
+	 * WINDOWSTART for the previous window-frame was set before
+	 * (not spilled) but is zero now (spilled).
+	 * If this bit is zero, all other bits except the one for the
+	 * current window frame are also zero. So, we can use a simple test:
+	 * 'and' WINDOWSTART and WINDOWSTART-1:
+	 *
+	 *  (XXXXXX1[0]* - 1) AND XXXXXX1[0]* = XXXXXX0[0]*
+	 *
+	 * The result is zero only if one bit was set.
+	 *
+	 * (Note: We might have gone through several task switches before
+	 *        we come back to the current task, so WINDOWBASE might be
+	 *        different from the time the exception occurred.)
+	 */
+
+	/* Test WINDOWSTART before and after the exception.
+	 * We actually have WMASK, so we only have to test if it is 1 or not.
+	 */
+
+	l32i	a2, a1, PT_WMASK
+	_beqi	a2, 1, common_exception_exit	# Spilled before exception,jump
+
+	/* Test WINDOWSTART now. If spilled, do the movsp */
+
+	rsr     a3, WINDOWSTART
+	addi	a0, a3, -1
+	and     a3, a3, a0
+	_bnez	a3, common_exception_exit
+
+	/* Do a movsp (we returned from a call4, so we have at least a0..a7) */
+
+	addi    a0, a1, -16
+	l32i    a3, a0, 0
+	l32i    a4, a0, 4
+	s32i    a3, a1, PT_SIZE+0
+	s32i    a4, a1, PT_SIZE+4
+	l32i    a3, a0, 8
+	l32i    a4, a0, 12
+	s32i    a3, a1, PT_SIZE+8
+	s32i    a4, a1, PT_SIZE+12
+
+	/* Common exception exit.
+	 * We restore the special register and the current window frame, and
+	 * return from the exception.
+	 *
+	 * Note: We expect a2 to hold PT_WMASK
+	 */
+
+common_exception_exit:
+
+	/* Restore address registers. */
+
+	_bbsi.l	a2, 1, 1f
+	l32i	a4,  a1, PT_AREG4
+	l32i	a5,  a1, PT_AREG5
+	l32i	a6,  a1, PT_AREG6
+	l32i	a7,  a1, PT_AREG7
+	_bbsi.l	a2, 2, 1f
+	l32i	a8,  a1, PT_AREG8
+	l32i	a9,  a1, PT_AREG9
+	l32i	a10, a1, PT_AREG10
+	l32i	a11, a1, PT_AREG11
+	_bbsi.l	a2, 3, 1f
+	l32i	a12, a1, PT_AREG12
+	l32i	a13, a1, PT_AREG13
+	l32i	a14, a1, PT_AREG14
+	l32i	a15, a1, PT_AREG15
+
+	/* Restore PC, SAR */
+
+1:	l32i	a2, a1, PT_PC
+	l32i	a3, a1, PT_SAR
+	wsr	a2, EPC_1
+	wsr	a3, SAR
+
+	/* Restore LBEG, LEND, LCOUNT */
+
+	l32i	a2, a1, PT_LBEG
+	l32i	a3, a1, PT_LEND
+	wsr	a2, LBEG
+	l32i	a2, a1, PT_LCOUNT
+	wsr	a3, LEND
+	wsr	a2, LCOUNT
+
+	/* We control single stepping through the ICOUNTLEVEL register. */
+
+	l32i	a2, a1, PT_ICOUNTLEVEL
+	movi	a3, -2
+	wsr	a2, ICOUNTLEVEL
+	wsr	a3, ICOUNT
+
+	/* Check if it was double exception. */
+
+	l32i	a0, a1, PT_DEPC
+	l32i	a3, a1, PT_AREG3
+	l32i	a2, a1, PT_AREG2
+	_bgeui	a0, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
+
+	/* Restore a0...a3 and return */
+
+	l32i	a0, a1, PT_AREG0
+	l32i	a1, a1, PT_AREG1
+	rfe
+
+1:	wsr	a0, DEPC
+	l32i	a0, a1, PT_AREG0
+	l32i	a1, a1, PT_AREG1
+	rfde
+
+/*
+ * Debug exception handler.
+ *
+ * Currently, we don't support KGDB, so only user application can be debugged.
+ *
+ * When we get here,  a0 is trashed and saved to excsave[debuglevel]
+ */
+
+ENTRY(debug_exception)
+
+	rsr	a0, EPS + XCHAL_DEBUGLEVEL
+	bbsi.l	a0, PS_EXCM_BIT, 1f	# exception mode
+
+	/* Set EPC_1 and EXCCAUSE */
+
+	wsr	a2, DEPC		# save a2 temporarily
+	rsr	a2, EPC + XCHAL_DEBUGLEVEL
+	wsr	a2, EPC_1
+
+	movi	a2, EXCCAUSE_MAPPED_DEBUG
+	wsr	a2, EXCCAUSE
+
+	/* Restore PS to the value before the debug exc but with PS.EXCM set.*/
+
+	movi	a2, 1 << PS_EXCM_BIT
+	or	a2, a0, a2
+	movi	a0, debug_exception	# restore a3, debug jump vector
+	wsr	a2, PS
+	xsr	a0, EXCSAVE + XCHAL_DEBUGLEVEL
+
+	/* Switch to kernel/user stack, restore jump vector, and save a0 */
+
+	bbsi.l	a2, PS_UM_BIT, 2f	# jump if user mode
+
+	addi	a2, a1, -16-PT_SIZE	# assume kernel stack
+	s32i	a0, a2, PT_AREG0
+	movi	a0, 0
+	s32i	a1, a2, PT_AREG1
+	s32i	a0, a2, PT_DEPC		# mark it as a regular exception
+	xsr	a0, DEPC
+	s32i	a3, a2, PT_AREG3
+	s32i	a0, a2, PT_AREG2
+	mov	a1, a2
+	j	_kernel_exception
+
+2:	rsr	a2, EXCSAVE_1
+	l32i	a2, a2, EXC_TABLE_KSTK	# load kernel stack pointer
+	s32i	a0, a2, PT_AREG0
+	movi	a0, 0
+	s32i	a1, a2, PT_AREG1
+	s32i	a0, a2, PT_DEPC
+	xsr	a0, DEPC
+	s32i	a3, a2, PT_AREG3
+	s32i	a0, a2, PT_AREG2
+	mov	a1, a2
+	j	_user_exception
+
+	/* Debug exception while in exception mode. */
+1:	j	1b	// FIXME!!
+
+
+/*
+ * We get here in case of an unrecoverable exception.
+ * The only thing we can do is to be nice and print a panic message.
+ * We only produce a single stack frame for panic, so ???
+ *
+ *
+ * Entry conditions:
+ *
+ *   - a0 contains the caller address; original value saved in excsave1.
+ *   - the original a0 contains a valid return address (backtrace) or 0.
+ *   - a2 contains a valid stackpointer
+ *
+ * Notes:
+ *
+ *   - If the stack pointer could be invalid, the caller has to setup a
+ *     dummy stack pointer (e.g. the stack of the init_task)
+ *
+ *   - If the return address could be invalid, the caller has to set it
+ *     to 0, so the backtrace would stop.
+ *
+ */
+	.align 4
+unrecoverable_text:
+	.ascii "Unrecoverable error in exception handler\0"
+
+ENTRY(unrecoverable_exception)
+
+	movi	a0, 1
+	movi	a1, 0
+
+	wsr	a0, WINDOWSTART
+	wsr	a1, WINDOWBASE
+	rsync
+
+	movi	a1, (1 << PS_WOE_BIT) | 1
+	wsr	a1, PS
+	rsync
+
+	movi	a1, init_task
+	movi	a0, 0
+	addi	a1, a1, PT_REGS_OFFSET
+
+	movi	a4, panic
+	movi	a6, unrecoverable_text
+
+	callx4	a4
+
+1:	j	1b
+
+
+/* -------------------------- FAST EXCEPTION HANDLERS ----------------------- */
+
+/*
+ * Fast-handler for alloca exceptions
+ *
+ *  The ALLOCA handler is entered when user code executes the MOVSP
+ *  instruction and the caller's frame is not in the register file.
+ *  In this case, the caller frame's a0..a3 are on the stack just
+ *  below sp (a1), and this handler moves them.
+ *
+ *  For "MOVSP <ar>,<as>" without destination register a1, this routine
+ *  simply moves the value from <as> to <ar> without moving the save area.
+ *
+ * Entry condition:
+ *
+ *   a0:	trashed, original value saved on stack (PT_AREG0)
+ *   a1:	a1
+ *   a2:	new stack pointer, original in DEPC
+ *   a3:	dispatch table
+ *   depc:	a2, original value saved on stack (PT_DEPC)
+ *   excsave_1:	a3
+ *
+ *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
+ *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
+ */
+
+#if XCHAL_HAVE_BE
+#define _EXTUI_MOVSP_SRC(ar)	extui ar, ar, 4, 4
+#define _EXTUI_MOVSP_DST(ar)	extui ar, ar, 0, 4
+#else
+#define _EXTUI_MOVSP_SRC(ar)	extui ar, ar, 0, 4
+#define _EXTUI_MOVSP_DST(ar)	extui ar, ar, 4, 4
+#endif
+
+ENTRY(fast_alloca)
+
+	/* We shouldn't be in a double exception. */
+
+	l32i	a0, a2, PT_DEPC
+	_bgeui	a0, VALID_DOUBLE_EXCEPTION_ADDRESS, .Lunhandled_double
+
+	rsr	a0, DEPC		# get a2
+	s32i	a4, a2, PT_AREG4	# save a4 and
+	s32i	a0, a2, PT_AREG2	# a2 to stack
+
+	/* Exit critical section. */
+
+	movi	a0, 0
+	s32i	a0, a3, EXC_TABLE_FIXUP
+
+	/* Restore a3, excsave_1 */
+
+	xsr	a3, EXCSAVE_1		# make sure excsave_1 is valid for dbl.
+	rsr	a4, EPC_1		# get exception address
+	s32i	a3, a2, PT_AREG3	# save a3 to stack
+
+#ifdef ALLOCA_EXCEPTION_IN_IRAM
+#error	iram not supported
+#else
+	/* Note: l8ui not allowed in IRAM/IROM!! */
+	l8ui	a0, a4, 1		# read as(src) from MOVSP instruction
+#endif
+	movi	a3, .Lmovsp_src
+	_EXTUI_MOVSP_SRC(a0)		# extract source register number
+	addx8	a3, a0, a3
+	jx	a3
+
+.Lunhandled_double:
+	wsr	a0, EXCSAVE_1
+	movi	a0, unrecoverable_exception
+	callx0	a0
+
+	.align 8
+.Lmovsp_src:
+	l32i	a3, a2, PT_AREG0;	_j 1f;	.align 8
+	mov	a3, a1;			_j 1f;	.align 8
+	l32i	a3, a2, PT_AREG2;	_j 1f;	.align 8
+	l32i	a3, a2, PT_AREG3;	_j 1f;	.align 8
+	l32i	a3, a2, PT_AREG4;	_j 1f;	.align 8
+	mov	a3, a5;			_j 1f;	.align 8
+	mov	a3, a6;			_j 1f;	.align 8
+	mov	a3, a7;			_j 1f;	.align 8
+	mov	a3, a8;			_j 1f;	.align 8
+	mov	a3, a9;			_j 1f;	.align 8
+	mov	a3, a10;		_j 1f;	.align 8
+	mov	a3, a11;		_j 1f;	.align 8
+	mov	a3, a12;		_j 1f;	.align 8
+	mov	a3, a13;		_j 1f;	.align 8
+	mov	a3, a14;		_j 1f;	.align 8
+	mov	a3, a15;		_j 1f;	.align 8
+
+1:
+
+#ifdef ALLOCA_EXCEPTION_IN_IRAM
+#error	iram not supported
+#else
+	l8ui	a0, a4, 0		# read ar(dst) from MOVSP instruction
+#endif
+	addi	a4, a4, 3		# step over movsp
+	_EXTUI_MOVSP_DST(a0)		# extract destination register
+	wsr	a4, EPC_1		# save new epc_1
+
+	_bnei	a0, 1, 1f		# no 'movsp a1, ax': jump
+
+        /* Move the save area. This implies the use of the L32E
+	 * and S32E instructions, because this move must be done with
+	 * the user's PS.RING privilege levels, not with ring 0
+	 * (kernel's) privileges currently active with PS.EXCM
+	 * set. Note that we have stil registered a fixup routine with the
+	 * double exception vector in case a double exception occurs.
+	 */
+
+	/* a0,a4:avail a1:old user stack a2:exc. stack a3:new user stack. */
+
+	l32e	a0, a1, -16
+	l32e	a4, a1, -12
+	s32e	a0, a3, -16
+	s32e	a4, a3, -12
+	l32e	a0, a1, -8
+	l32e	a4, a1, -4
+	s32e	a0, a3, -8
+	s32e	a4, a3, -4
+
+	/* Restore stack-pointer and all the other saved registers. */
+
+	mov	a1, a3
+
+	l32i	a4, a2, PT_AREG4
+	l32i	a3, a2, PT_AREG3
+	l32i	a0, a2, PT_AREG0
+	l32i	a2, a2, PT_AREG2
+	rfe
+
+	/*  MOVSP <at>,<as>  was invoked with <at> != a1.
+	 *  Because the stack pointer is not being modified,
+	 *  we should be able to just modify the pointer
+	 *  without moving any save area.
+	 *  The processor only traps these occurrences if the
+	 *  caller window isn't live, so unfortunately we can't
+	 *  use this as an alternate trap mechanism.
+	 *  So we just do the move.  This requires that we
+	 *  resolve the destination register, not just the source,
+	 *  so there's some extra work.
+	 *  (PERHAPS NOT REALLY NEEDED, BUT CLEANER...)
+	 */
+
+	/* a0 dst-reg, a1 user-stack, a2 stack, a3 value of src reg. */
+
+1:	movi	a4, .Lmovsp_dst
+	addx8	a4, a0, a4
+	jx	a4
+
+	.align 8
+.Lmovsp_dst:
+	s32i	a3, a2, PT_AREG0;	_j 1f;	.align 8
+	mov	a1, a3;			_j 1f;	.align 8
+	s32i	a3, a2, PT_AREG2;	_j 1f;	.align 8
+	s32i	a3, a2, PT_AREG3;	_j 1f;	.align 8
+	s32i	a3, a2, PT_AREG4;	_j 1f;	.align 8
+	mov	a5, a3;			_j 1f;	.align 8
+	mov	a6, a3;			_j 1f;	.align 8
+	mov	a7, a3;			_j 1f;	.align 8
+	mov	a8, a3;			_j 1f;	.align 8
+	mov	a9, a3;			_j 1f;	.align 8
+	mov	a10, a3;		_j 1f;	.align 8
+	mov	a11, a3;		_j 1f;	.align 8
+	mov	a12, a3;		_j 1f;	.align 8
+	mov	a13, a3;		_j 1f;	.align 8
+	mov	a14, a3;		_j 1f;	.align 8
+	mov	a15, a3;		_j 1f;	.align 8
+
+1:	l32i	a4, a2, PT_AREG4
+	l32i	a3, a2, PT_AREG3
+	l32i	a0, a2, PT_AREG0
+	l32i	a2, a2, PT_AREG2
+	rfe
+
+
+/*
+ * fast system calls.
+ *
+ * WARNING:  The kernel doesn't save the entire user context before
+ * handling a fast system call.  These functions are small and short,
+ * usually offering some functionality not available to user tasks.
+ *
+ * BE CAREFUL TO PRESERVE THE USER'S CONTEXT.
+ *
+ * Entry condition:
+ *
+ *   a0:	trashed, original value saved on stack (PT_AREG0)
+ *   a1:	a1
+ *   a2:	new stack pointer, original in DEPC
+ *   a3:	dispatch table
+ *   depc:	a2, original value saved on stack (PT_DEPC)
+ *   excsave_1:	a3
+ */
+
+ENTRY(fast_syscall_kernel)
+
+	/* Skip syscall. */
+
+	rsr	a0, EPC_1
+	addi	a0, a0, 3
+	wsr	a0, EPC_1
+
+	l32i	a0, a2, PT_DEPC
+	bgeui	a0, VALID_DOUBLE_EXCEPTION_ADDRESS, fast_syscall_unrecoverable
+
+	rsr	a0, DEPC			# get syscall-nr
+	_beqz	a0, fast_syscall_spill_registers
+	_beqi	a0, __NR_xtensa, fast_syscall_xtensa
+
+	j	kernel_exception
+
+ENTRY(fast_syscall_user)
+
+	/* Skip syscall. */
+
+	rsr	a0, EPC_1
+	addi	a0, a0, 3
+	wsr	a0, EPC_1
+
+	l32i	a0, a2, PT_DEPC
+	bgeui	a0, VALID_DOUBLE_EXCEPTION_ADDRESS, fast_syscall_unrecoverable
+
+	rsr	a0, DEPC			# get syscall-nr
+	_beqz	a0, fast_syscall_spill_registers
+	_beqi	a0, __NR_xtensa, fast_syscall_xtensa
+
+	j	user_exception
+
+ENTRY(fast_syscall_unrecoverable)
+
+        /* Restore all states. */
+
+        l32i    a0, a2, PT_AREG0        # restore a0
+        xsr     a2, DEPC                # restore a2, depc
+        rsr     a3, EXCSAVE_1
+
+        wsr     a0, EXCSAVE_1
+        movi    a0, unrecoverable_exception
+        callx0  a0
+
+
+
+/*
+ * sysxtensa syscall handler
+ *
+ * int sysxtensa (SYS_XTENSA_ATOMIC_SET,     ptr, val,    unused);
+ * int sysxtensa (SYS_XTENSA_ATOMIC_ADD,     ptr, val,    unused);
+ * int sysxtensa (SYS_XTENSA_ATOMIC_EXG_ADD, ptr, val,    unused);
+ * int sysxtensa (SYS_XTENSA_ATOMIC_CMP_SWP, ptr, oldval, newval);
+ *        a2            a6                   a3    a4      a5
+ *
+ * Entry condition:
+ *
+ *   a0:	a2 (syscall-nr), original value saved on stack (PT_AREG0)
+ *   a1:	a1
+ *   a2:	new stack pointer, original in a0 and DEPC
+ *   a3:	dispatch table, original in excsave_1
+ *   a4..a15:	unchanged
+ *   depc:	a2, original value saved on stack (PT_DEPC)
+ *   excsave_1:	a3
+ *
+ *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
+ *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
+ *
+ * Note: we don't have to save a2; a2 holds the return value
+ *
+ * We use the two macros TRY and CATCH:
+ *
+ * TRY	 adds an entry to the __ex_table fixup table for the immediately
+ *	 following instruction.
+ *
+ * CATCH catches any exception that occurred at one of the preceding TRY
+ *       statements and continues from there
+ *
+ * Usage TRY	l32i	a0, a1, 0
+ *		<other code>
+ *	 done:	rfe
+ *	 CATCH	<set return code>
+ *		j done
+ */
+
+#define TRY								\
+	.section __ex_table, "a";					\
+	.word	66f, 67f;						\
+	.text;								\
+66:
+
+#define CATCH								\
+67:
+
+ENTRY(fast_syscall_xtensa)
+
+	xsr	a3, EXCSAVE_1		# restore a3, excsave1
+
+	s32i	a7, a2, PT_AREG7	# we need an additional register
+	movi	a7, 4			# sizeof(unsigned int)
+	access_ok a3, a7, a0, a2, .Leac	# a0: scratch reg, a2: sp
+
+	addi	a6, a6, -1		# assuming SYS_XTENSA_ATOMIC_SET = 1
+	_bgeui	a6, SYS_XTENSA_COUNT - 1, .Lill
+	_bnei	a6, SYS_XTENSA_ATOMIC_CMP_SWP - 1, .Lnswp
+
+	/* Fall through for ATOMIC_CMP_SWP. */
+
+.Lswp:	/* Atomic compare and swap */
+
+TRY	l32i	a0, a3, 0		# read old value
+	bne	a0, a4, 1f		# same as old value? jump
+TRY	s32i	a5, a3, 0		# different, modify value
+	l32i	a7, a2, PT_AREG7	# restore a7
+	l32i	a0, a2, PT_AREG0	# restore a0
+	movi	a2, 1			# and return 1
+	addi	a6, a6, 1		# restore a6 (really necessary?)
+	rfe
+
+1:	l32i	a7, a2, PT_AREG7	# restore a7
+	l32i	a0, a2, PT_AREG0	# restore a0
+	movi	a2, 0			# return 0 (note that we cannot set
+	addi	a6, a6, 1		# restore a6 (really necessary?)
+	rfe
+
+.Lnswp:	/* Atomic set, add, and exg_add. */
+
+TRY	l32i	a7, a3, 0		# orig
+	add	a0, a4, a7		# + arg
+	moveqz	a0, a4, a6		# set
+TRY	s32i	a0, a3, 0		# write new value
+
+	mov	a0, a2
+	mov	a2, a7
+	l32i	a7, a0, PT_AREG7	# restore a7
+	l32i	a0, a0, PT_AREG0	# restore a0
+	addi	a6, a6, 1		# restore a6 (really necessary?)
+	rfe
+
+CATCH
+.Leac:	l32i	a7, a2, PT_AREG7	# restore a7
+	l32i	a0, a2, PT_AREG0	# restore a0
+	movi	a2, -EFAULT
+	rfe
+
+.Lill:	l32i	a7, a2, PT_AREG0	# restore a7
+	l32i	a0, a2, PT_AREG0	# restore a0
+	movi	a2, -EINVAL
+	rfe
+
+
+
+
+/* fast_syscall_spill_registers.
+ *
+ * Entry condition:
+ *
+ *   a0:	trashed, original value saved on stack (PT_AREG0)
+ *   a1:	a1
+ *   a2:	new stack pointer, original in DEPC
+ *   a3:	dispatch table
+ *   depc:	a2, original value saved on stack (PT_DEPC)
+ *   excsave_1:	a3
+ *
+ * Note: We assume the stack pointer is EXC_TABLE_KSTK in the fixup handler.
+ */
+
+ENTRY(fast_syscall_spill_registers)
+
+	/* Register a FIXUP handler (pass current wb as a parameter) */
+
+	movi	a0, fast_syscall_spill_registers_fixup
+	s32i	a0, a3, EXC_TABLE_FIXUP
+	rsr	a0, WINDOWBASE
+	s32i	a0, a3, EXC_TABLE_PARAM
+
+	/* Save a3 and SAR on stack. */
+
+	rsr	a0, SAR
+	xsr	a3, EXCSAVE_1		# restore a3 and excsave_1
+	s32i	a3, a2, PT_AREG3
+	s32i	a4, a2, PT_AREG4
+	s32i	a0, a2, PT_AREG5	# store SAR to PT_AREG5
+
+	/* The spill routine might clobber a7, a11, and a15. */
+
+	s32i	a7, a2, PT_AREG7
+	s32i	a11, a2, PT_AREG11
+	s32i	a15, a2, PT_AREG15
+
+	call0	_spill_registers	# destroys a3, a4, and SAR
+
+	/* Advance PC, restore registers and SAR, and return from exception. */
+
+	l32i	a3, a2, PT_AREG5
+	l32i	a4, a2, PT_AREG4
+	l32i	a0, a2, PT_AREG0
+	wsr	a3, SAR
+	l32i	a3, a2, PT_AREG3
+
+	/* Restore clobbered registers. */
+
+	l32i	a7, a2, PT_AREG7
+	l32i	a11, a2, PT_AREG11
+	l32i	a15, a2, PT_AREG15
+
+	movi	a2, 0
+	rfe
+
+/* Fixup handler.
+ *
+ * We get here if the spill routine causes an exception, e.g. tlb miss.
+ * We basically restore WINDOWBASE and WINDOWSTART to the condition when
+ * we entered the spill routine and jump to the user exception handler.
+ *
+ * a0: value of depc, original value in depc
+ * a2: trashed, original value in EXC_TABLE_DOUBLE_SAVE
+ * a3: exctable, original value in excsave1
+ */
+
+fast_syscall_spill_registers_fixup:
+
+	rsr	a2, WINDOWBASE	# get current windowbase (a2 is saved)
+	xsr	a0, DEPC	# restore depc and a0
+	ssl	a2		# set shift (32 - WB)
+
+	/* We need to make sure the current registers (a0-a3) are preserved.
+	 * To do this, we simply set the bit for the current window frame
+	 * in WS, so that the exception handlers save them to the task stack.
+	 */
+
+	rsr	a3, EXCSAVE_1	# get spill-mask
+	slli	a2, a3, 1	# shift left by one
+
+	slli	a3, a2, 32-WSBITS
+	src	a2, a2, a3	# a1 = xxwww1yyxxxwww1yy......
+	wsr	a2, WINDOWSTART	# set corrected windowstart
+
+	movi	a3, exc_table
+	l32i	a2, a3, EXC_TABLE_DOUBLE_SAVE	# restore a2
+	l32i	a3, a3, EXC_TABLE_PARAM	# original WB (in user task)
+
+	/* Return to the original (user task) WINDOWBASE.
+	 * We leave the following frame behind:
+	 * a0, a1, a2	same
+	 * a3:		trashed (saved in excsave_1)
+	 * depc:	depc (we have to return to that address)
+	 * excsave_1:	a3
+	 */
+
+	wsr	a3, WINDOWBASE
+	rsync
+
+	/* We are now in the original frame when we entered _spill_registers:
+	 *  a0: return address
+	 *  a1: used, stack pointer
+	 *  a2: kernel stack pointer
+	 *  a3: available, saved in EXCSAVE_1
+	 *  depc: exception address
+	 *  excsave: a3
+	 * Note: This frame might be the same as above.
+	 */
+
+	/* Setup stack pointer. */
+
+	addi	a2, a2, -PT_USER_SIZE
+	s32i	a0, a2, PT_AREG0
+
+	/* Make sure we return to this fixup handler. */
+
+	movi	a3, fast_syscall_spill_registers_fixup_return
+	s32i	a3, a2, PT_DEPC		# setup depc
+
+	/* Jump to the exception handler. */
+
+	movi	a3, exc_table
+	rsr	a0, EXCCAUSE
+        addx4	a0, a0, a3              	# find entry in table
+        l32i	a0, a0, EXC_TABLE_FAST_USER     # load handler
+        jx	a0
+
+fast_syscall_spill_registers_fixup_return:
+
+	/* When we return here, all registers have been restored (a2: DEPC) */
+
+	wsr	a2, DEPC		# exception address
+
+	/* Restore fixup handler. */
+
+	xsr	a3, EXCSAVE_1
+	movi	a2, fast_syscall_spill_registers_fixup
+	s32i	a2, a3, EXC_TABLE_FIXUP
+	rsr	a2, WINDOWBASE
+	s32i	a2, a3, EXC_TABLE_PARAM
+	l32i	a2, a3, EXC_TABLE_KSTK
+
+	/* Load WB at the time the exception occurred. */
+
+	rsr	a3, SAR			# WB is still in SAR
+	neg	a3, a3
+	wsr	a3, WINDOWBASE
+	rsync
+
+	/* Restore a3 and return. */
+
+	movi	a3, exc_table
+	xsr	a3, EXCSAVE_1
+
+	rfde
+
+
+/*
+ * spill all registers.
+ *
+ * This is not a real function. The following conditions must be met:
+ *
+ *  - must be called with call0.
+ *  - uses a3, a4 and SAR.
+ *  - the last 'valid' register of each frame are clobbered.
+ *  - the caller must have registered a fixup handler
+ *    (or be inside a critical section)
+ *  - PS_EXCM must be set (PS_WOE cleared?)
+ */
+
+ENTRY(_spill_registers)
+
+	/*
+	 * Rotate ws so that the current windowbase is at bit 0.
+	 * Assume ws = xxxwww1yy (www1 current window frame).
+	 * Rotate ws right so that a4 = yyxxxwww1.
+	 */
+
+	rsr	a4, WINDOWBASE
+	rsr	a3, WINDOWSTART		# a3 = xxxwww1yy
+	ssr	a4			# holds WB
+	slli	a4, a3, WSBITS
+	or	a3, a3, a4		# a3 = xxxwww1yyxxxwww1yy
+	srl	a3, a3			# a3 = 00xxxwww1yyxxxwww1
+
+	/* We are done if there are no more than the current register frame. */
+
+	extui	a3, a3, 1, WSBITS-1	# a3 = 0yyxxxwww
+	movi	a4, (1 << (WSBITS-1))
+	_beqz	a3, .Lnospill		# only one active frame? jump
+
+	/* We want 1 at the top, so that we return to the current windowbase */
+
+	or	a3, a3, a4		# 1yyxxxwww
+
+	/* Skip empty frames - get 'oldest' WINDOWSTART-bit. */
+
+	wsr	a3, WINDOWSTART		# save shifted windowstart
+	neg	a4, a3
+	and	a3, a4, a3		# first bit set from right: 000010000
+
+	ffs_ws	a4, a3			# a4: shifts to skip empty frames
+	movi	a3, WSBITS
+	sub	a4, a3, a4		# WSBITS-a4:number of 0-bits from right
+	ssr	a4			# save in SAR for later.
+
+	rsr	a3, WINDOWBASE
+	add	a3, a3, a4
+	wsr	a3, WINDOWBASE
+	rsync
+
+	rsr	a3, WINDOWSTART
+	srl	a3, a3			# shift windowstart
+
+	/* WB is now just one frame below the oldest frame in the register
+	   window. WS is shifted so the oldest frame is in bit 0, thus, WB
+	   and WS differ by one 4-register frame. */
+
+	/* Save frames. Depending what call was used (call4, call8, call12),
+	 * we have to save 4,8. or 12 registers.
+	 */
+
+	_bbsi.l	a3, 1, .Lc4
+	_bbsi.l	a3, 2, .Lc8
+
+	/* Special case: we have a call12-frame starting at a4. */
+
+	_bbci.l	a3, 3, .Lc12	# bit 3 shouldn't be zero! (Jump to Lc12 first)
+
+	s32e	a4, a1, -16	# a1 is valid with an empty spill area
+	l32e	a4, a5, -12
+	s32e	a8, a4, -48
+	mov	a8, a4
+	l32e	a4, a1, -16
+	j	.Lc12c
+
+.Lnospill:
+	ret
+
+.Lloop: _bbsi.l	a3, 1, .Lc4
+	_bbci.l	a3, 2, .Lc12
+
+.Lc8:	s32e	a4, a13, -16
+	l32e	a4, a5, -12
+	s32e	a8, a4, -32
+	s32e	a5, a13, -12
+	s32e	a6, a13, -8
+	s32e	a7, a13, -4
+	s32e	a9, a4, -28
+	s32e	a10, a4, -24
+	s32e	a11, a4, -20
+
+	srli	a11, a3, 2		# shift windowbase by 2
+	rotw	2
+	_bnei	a3, 1, .Lloop
+
+.Lexit: /* Done. Do the final rotation, set WS, and return. */
+
+	rotw	1
+	rsr	a3, WINDOWBASE
+	ssl	a3
+	movi	a3, 1
+	sll	a3, a3
+	wsr	a3, WINDOWSTART
+	ret
+
+.Lc4:	s32e	a4, a9, -16
+	s32e	a5, a9, -12
+	s32e	a6, a9, -8
+	s32e	a7, a9, -4
+
+	srli	a7, a3, 1
+	rotw	1
+	_bnei	a3, 1, .Lloop
+	j	.Lexit
+
+.Lc12:	_bbci.l	a3, 3, .Linvalid_mask	# bit 2 shouldn't be zero!
+
+	/* 12-register frame (call12) */
+
+	l32e	a2, a5, -12
+	s32e	a8, a2, -48
+	mov	a8, a2
+
+.Lc12c: s32e	a9, a8, -44
+	s32e	a10, a8, -40
+	s32e	a11, a8, -36
+	s32e	a12, a8, -32
+	s32e	a13, a8, -28
+	s32e	a14, a8, -24
+	s32e	a15, a8, -20
+	srli	a15, a3, 3
+
+	/* The stack pointer for a4..a7 is out of reach, so we rotate the
+	 * window, grab the stackpointer, and rotate back.
+	 * Alternatively, we could also use the following approach, but that
+	 * makes the fixup routine much more complicated:
+	 * rotw	1
+	 * s32e	a0, a13, -16
+	 * ...
+	 * rotw 2
+	 */
+
+	rotw	1
+	mov	a5, a13
+	rotw	-1
+
+	s32e	a4, a9, -16
+	s32e	a5, a9, -12
+	s32e	a6, a9, -8
+	s32e	a7, a9, -4
+
+	rotw	3
+
+	_beqi	a3, 1, .Lexit
+	j	.Lloop
+
+.Linvalid_mask:
+
+	/* We get here because of an unrecoverable error in the window
+	 * registers. If we are in user space, we kill the application,
+	 * however, this condition is unrecoverable in kernel space.
+	 */
+
+	rsr	a0, PS
+	_bbci.l	a0, PS_UM_BIT, 1f
+
+ 	/* User space: Setup a dummy frame and kill application.
+	 * Note: We assume EXC_TABLE_KSTK contains a valid stack pointer.
+	 */
+
+	movi	a0, 1
+	movi	a1, 0
+
+	wsr	a0, WINDOWSTART
+	wsr	a1, WINDOWBASE
+	rsync
+
+	movi	a0, 0
+
+	movi	a3, exc_table
+	l32i	a1, a3, EXC_TABLE_KSTK
+	wsr	a3, EXCSAVE_1
+
+	movi	a4, (1 << PS_WOE_BIT) | 1
+	wsr	a4, PS
+	rsync
+
+	movi	a6, SIGSEGV
+	movi	a4, do_exit
+	callx4	a4
+
+1:	/* Kernel space: PANIC! */
+
+	wsr	a0, EXCSAVE_1
+	movi	a0, unrecoverable_exception
+	callx0	a0		# should not return
+1:	j	1b
+
+#ifdef CONFIG_MMU
+/*
+ * We should never get here. Bail out!
+ */
+
+ENTRY(fast_second_level_miss_double_kernel)
+
+1:	movi	a0, unrecoverable_exception
+	callx0	a0		# should not return
+1:	j	1b
+
+/* First-level entry handler for user, kernel, and double 2nd-level
+ * TLB miss exceptions.  Note that for now, user and kernel miss
+ * exceptions share the same entry point and are handled identically.
+ *
+ * An old, less-efficient C version of this function used to exist.
+ * We include it below, interleaved as comments, for reference.
+ *
+ * Entry condition:
+ *
+ *   a0:	trashed, original value saved on stack (PT_AREG0)
+ *   a1:	a1
+ *   a2:	new stack pointer, original in DEPC
+ *   a3:	dispatch table
+ *   depc:	a2, original value saved on stack (PT_DEPC)
+ *   excsave_1:	a3
+ *
+ *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
+ *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
+ */
+
+ENTRY(fast_second_level_miss)
+
+	/* Save a1. Note: we don't expect a double exception. */
+
+	s32i	a1, a2, PT_AREG1
+
+	/* We need to map the page of PTEs for the user task.  Find
+	 * the pointer to that page.  Also, it's possible for tsk->mm
+	 * to be NULL while tsk->active_mm is nonzero if we faulted on
+	 * a vmalloc address.  In that rare case, we must use
+	 * active_mm instead to avoid a fault in this handler.  See
+	 *
+	 * http://mail.nl.linux.org/linux-mm/2002-08/msg00258.html
+	 *   (or search Internet on "mm vs. active_mm")
+	 *
+	 *	if (!mm)
+	 *		mm = tsk->active_mm;
+	 *	pgd = pgd_offset (mm, regs->excvaddr);
+	 *	pmd = pmd_offset (pgd, regs->excvaddr);
+	 *	pmdval = *pmd;
+	 */
+
+	GET_CURRENT(a1,a2)
+	l32i	a0, a1, TASK_MM		# tsk->mm
+	beqz	a0, 9f
+
+
+	/* We deliberately destroy a3 that holds the exception table. */
+
+8:	rsr	a3, EXCVADDR		# fault address
+	_PGD_OFFSET(a0, a3, a1)
+	l32i	a0, a0, 0		# read pmdval
+	beqz	a0, 2f
+
+	/* Read ptevaddr and convert to top of page-table page.
+	 *
+	 * 	vpnval = read_ptevaddr_register() & PAGE_MASK;
+	 * 	vpnval += DTLB_WAY_PGTABLE;
+	 *	pteval = mk_pte (virt_to_page(pmd_val(pmdval)), PAGE_KERNEL);
+	 *	write_dtlb_entry (pteval, vpnval);
+	 *
+	 * The messy computation for 'pteval' above really simplifies
+	 * into the following:
+	 *
+	 * pteval = ((pmdval - PAGE_OFFSET) & PAGE_MASK) | PAGE_DIRECTORY
+	 */
+
+	movi	a1, -PAGE_OFFSET
+	add	a0, a0, a1		# pmdval - PAGE_OFFSET
+	extui	a1, a0, 0, PAGE_SHIFT	# ... & PAGE_MASK
+	xor	a0, a0, a1
+
+	movi	a1, _PAGE_DIRECTORY
+	or	a0, a0, a1		# ... | PAGE_DIRECTORY
+
+	/*
+	 * We utilize all three wired-ways (7-9) to hold pmd translations.
+	 * Memory regions are mapped to the DTLBs according to bits 28 and 29.
+	 * This allows to map the three most common regions to three different
+	 * DTLBs:
+	 *  0,1 -> way 7	program (0040.0000) and virtual (c000.0000)
+	 *  2   -> way 8	shared libaries (2000.0000)
+	 *  3   -> way 0	stack (3000.0000)
+	 */
+
+	extui	a3, a3, 28, 2		# addr. bit 28 and 29	0,1,2,3
+	rsr	a1, PTEVADDR
+	addx2	a3, a3, a3		# ->			0,3,6,9
+	srli	a1, a1, PAGE_SHIFT
+	extui	a3, a3, 2, 2		# ->			0,0,1,2
+	slli	a1, a1, PAGE_SHIFT	# ptevaddr & PAGE_MASK
+	addi	a3, a3, DTLB_WAY_PGD
+	add	a1, a1, a3		# ... + way_number
+
+3:	wdtlb	a0, a1
+	dsync
+
+	/* Exit critical section. */
+
+4:	movi	a3, exc_table		# restore a3
+	movi	a0, 0
+	s32i	a0, a3, EXC_TABLE_FIXUP
+
+	/* Restore the working registers, and return. */
+
+	l32i	a0, a2, PT_AREG0
+	l32i	a1, a2, PT_AREG1
+	l32i	a2, a2, PT_DEPC
+	xsr	a3, EXCSAVE_1
+
+	bgeui	a2, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
+
+	/* Restore excsave1 and return. */
+
+	rsr	a2, DEPC
+	rfe
+
+	/* Return from double exception. */
+
+1:	xsr	a2, DEPC
+	esync
+	rfde
+
+9:	l32i	a0, a1, TASK_ACTIVE_MM	# unlikely case mm == 0
+	j	8b
+
+#if (DCACHE_WAY_SIZE > PAGE_SIZE)
+
+2:	/* Special case for cache aliasing.
+	 * We (should) only get here if a clear_user_page, copy_user_page
+	 * or the aliased cache flush functions got preemptively interrupted 
+	 * by another task. Re-establish temporary mapping to the 
+	 * TLBTEMP_BASE areas.
+	 */
+
+	/* We shouldn't be in a double exception */
+
+	l32i	a0, a2, PT_DEPC
+	bgeui	a0, VALID_DOUBLE_EXCEPTION_ADDRESS, 2f
+
+	/* Make sure the exception originated in the special functions */
+
+	movi	a0, __tlbtemp_mapping_start
+	rsr	a3, EPC_1
+	bltu	a3, a0, 2f
+	movi	a0, __tlbtemp_mapping_end
+	bgeu	a3, a0, 2f
+
+	/* Check if excvaddr was in one of the TLBTEMP_BASE areas. */
+
+	movi	a3, TLBTEMP_BASE_1
+	rsr	a0, EXCVADDR
+	bltu	a0, a3, 2f
+
+	addi	a1, a0, -(2 << (DCACHE_ALIAS_ORDER + PAGE_SHIFT))
+	bgeu	a1, a3, 2f
+
+	/* Check if we have to restore an ITLB mapping. */
+
+	movi	a1, __tlbtemp_mapping_itlb
+	rsr	a3, EPC_1
+	sub	a3, a3, a1
+
+	/* Calculate VPN */
+
+	movi	a1, PAGE_MASK
+	and	a1, a1, a0
+
+	/* Jump for ITLB entry */
+
+	bgez	a3, 1f
+
+	/* We can use up to two TLBTEMP areas, one for src and one for dst. */
+
+	extui	a3, a0, PAGE_SHIFT + DCACHE_ALIAS_ORDER, 1
+	add	a1, a3, a1
+
+	/* PPN is in a6 for the first TLBTEMP area and in a7 for the second. */
+
+	mov	a0, a6
+	movnez	a0, a7, a3
+	j	3b
+
+	/* ITLB entry. We only use dst in a6. */
+
+1:	witlb	a6, a1
+	isync
+	j	4b
+
+
+#endif	// DCACHE_WAY_SIZE > PAGE_SIZE
+
+
+2:	/* Invalid PGD, default exception handling */
+
+	movi	a3, exc_table
+	rsr	a1, DEPC
+	xsr	a3, EXCSAVE_1
+	s32i	a1, a2, PT_AREG2
+	s32i	a3, a2, PT_AREG3
+	mov	a1, a2
+
+	rsr	a2, PS
+	bbsi.l	a2, PS_UM_BIT, 1f
+	j	_kernel_exception
+1:	j	_user_exception
+
+
+/*
+ * StoreProhibitedException
+ *
+ * Update the pte and invalidate the itlb mapping for this pte.
+ *
+ * Entry condition:
+ *
+ *   a0:	trashed, original value saved on stack (PT_AREG0)
+ *   a1:	a1
+ *   a2:	new stack pointer, original in DEPC
+ *   a3:	dispatch table
+ *   depc:	a2, original value saved on stack (PT_DEPC)
+ *   excsave_1:	a3
+ *
+ *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
+ *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
+ */
+
+ENTRY(fast_store_prohibited)
+
+	/* Save a1 and a4. */
+
+	s32i	a1, a2, PT_AREG1
+	s32i	a4, a2, PT_AREG4
+
+	GET_CURRENT(a1,a2)
+	l32i	a0, a1, TASK_MM		# tsk->mm
+	beqz	a0, 9f
+
+8:	rsr	a1, EXCVADDR		# fault address
+	_PGD_OFFSET(a0, a1, a4)
+	l32i	a0, a0, 0
+	beqz	a0, 2f
+
+	/* Note that we assume _PAGE_WRITABLE_BIT is only set if pte is valid.*/
+
+	_PTE_OFFSET(a0, a1, a4)
+	l32i	a4, a0, 0		# read pteval
+	bbci.l	a4, _PAGE_WRITABLE_BIT, 2f
+
+	movi	a1, _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_HW_WRITE
+	or	a4, a4, a1
+	rsr	a1, EXCVADDR
+	s32i	a4, a0, 0
+
+	/* We need to flush the cache if we have page coloring. */
+#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK
+	dhwb	a0, 0
+#endif
+	pdtlb	a0, a1
+	wdtlb	a4, a0
+
+	/* Exit critical section. */
+
+	movi	a0, 0
+	s32i	a0, a3, EXC_TABLE_FIXUP
+
+	/* Restore the working registers, and return. */
+
+	l32i	a4, a2, PT_AREG4
+	l32i	a1, a2, PT_AREG1
+	l32i	a0, a2, PT_AREG0
+	l32i	a2, a2, PT_DEPC
+
+	/* Restore excsave1 and a3. */
+
+	xsr	a3, EXCSAVE_1
+	bgeui	a2, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
+
+	rsr	a2, DEPC
+	rfe
+
+	/* Double exception. Restore FIXUP handler and return. */
+
+1:	xsr	a2, DEPC
+	esync
+	rfde
+
+9:	l32i	a0, a1, TASK_ACTIVE_MM	# unlikely case mm == 0
+	j	8b
+
+2:	/* If there was a problem, handle fault in C */
+
+	rsr	a4, DEPC	# still holds a2
+	xsr	a3, EXCSAVE_1
+	s32i	a4, a2, PT_AREG2
+	s32i	a3, a2, PT_AREG3
+	l32i	a4, a2, PT_AREG4
+	mov	a1, a2
+
+	rsr	a2, PS
+	bbsi.l	a2, PS_UM_BIT, 1f
+	j	_kernel_exception
+1:	j	_user_exception
+#endif /* CONFIG_MMU */
+
+/*
+ * System Calls.
+ *
+ * void system_call (struct pt_regs* regs, int exccause)
+ *                            a2                 a3
+ */
+
+ENTRY(system_call)
+	entry	a1, 32
+
+	/* regs->syscall = regs->areg[2] */
+
+	l32i	a3, a2, PT_AREG2
+	mov	a6, a2
+	movi	a4, do_syscall_trace_enter
+	s32i	a3, a2, PT_SYSCALL
+	callx4	a4
+
+	/* syscall = sys_call_table[syscall_nr] */
+
+	movi	a4, sys_call_table;
+	movi	a5, __NR_syscall_count
+	movi	a6, -ENOSYS
+	bgeu	a3, a5, 1f
+
+	addx4	a4, a3, a4
+	l32i	a4, a4, 0
+	movi	a5, sys_ni_syscall;
+	beq	a4, a5, 1f
+
+	/* Load args: arg0 - arg5 are passed via regs. */
+
+	l32i	a6, a2, PT_AREG6
+	l32i	a7, a2, PT_AREG3
+	l32i	a8, a2, PT_AREG4
+	l32i	a9, a2, PT_AREG5
+	l32i	a10, a2, PT_AREG8
+	l32i	a11, a2, PT_AREG9
+
+	/* Pass one additional argument to the syscall: pt_regs (on stack) */
+	s32i	a2, a1, 0
+
+	callx4	a4
+
+1:	/* regs->areg[2] = return_value */
+
+	s32i	a6, a2, PT_AREG2
+	movi	a4, do_syscall_trace_leave
+	mov	a6, a2
+	callx4	a4
+	retw
+
+
+/*
+ * Create a kernel thread
+ *
+ * int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
+ * a2                    a2                 a3             a4
+ */
+
+ENTRY(kernel_thread)
+	entry	a1, 16
+
+	mov	a5, a2			# preserve fn over syscall
+	mov	a7, a3			# preserve args over syscall
+
+	movi	a3, _CLONE_VM | _CLONE_UNTRACED
+	movi	a2, __NR_clone
+	or	a6, a4, a3		# arg0: flags
+	mov	a3, a1			# arg1: sp
+	syscall
+
+	beq	a3, a1, 1f		# branch if parent
+	mov	a6, a7			# args
+	callx4	a5			# fn(args)
+
+	movi	a2, __NR_exit
+	syscall				# return value of fn(args) still in a6
+
+1:	retw
+
+/*
+ * Do a system call from kernel instead of calling sys_execve, so we end up
+ * with proper pt_regs.
+ *
+ * int kernel_execve(const char *fname, char *const argv[], charg *const envp[])
+ * a2                        a2               a3                  a4
+ */
+
+ENTRY(kernel_execve)
+	entry	a1, 16
+	mov	a6, a2			# arg0 is in a6
+	movi	a2, __NR_execve
+	syscall
+
+	retw
+
+/*
+ * Task switch.
+ *
+ * struct task*  _switch_to (struct task* prev, struct task* next)
+ *         a2                              a2                 a3
+ */
+
+ENTRY(_switch_to)
+
+	entry	a1, 16
+
+	mov	a12, a2			# preserve 'prev' (a2)
+	mov	a13, a3			# and 'next' (a3)
+
+	l32i	a4, a2, TASK_THREAD_INFO
+	l32i	a5, a3, TASK_THREAD_INFO
+
+	save_xtregs_user a4 a6 a8 a9 a10 a11 THREAD_XTREGS_USER
+
+	s32i	a0, a12, THREAD_RA	# save return address
+	s32i	a1, a12, THREAD_SP	# save stack pointer
+
+	/* Disable ints while we manipulate the stack pointer. */
+
+	movi	a14, (1 << PS_EXCM_BIT) | LOCKLEVEL
+	xsr	a14, PS
+	rsr	a3, EXCSAVE_1
+	rsync
+	s32i	a3, a3, EXC_TABLE_FIXUP	/* enter critical section */
+
+	/* Switch CPENABLE */
+
+#if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS)
+	l32i	a3, a5, THREAD_CPENABLE
+	xsr	a3, CPENABLE
+	s32i	a3, a4, THREAD_CPENABLE
+#endif
+
+	/* Flush register file. */
+
+	call0	_spill_registers	# destroys a3, a4, and SAR
+
+	/* Set kernel stack (and leave critical section)
+	 * Note: It's save to set it here. The stack will not be overwritten
+	 *       because the kernel stack will only be loaded again after
+	 *       we return from kernel space.
+	 */
+
+	rsr	a3, EXCSAVE_1		# exc_table
+	movi	a6, 0
+	addi	a7, a5, PT_REGS_OFFSET
+	s32i	a6, a3, EXC_TABLE_FIXUP
+	s32i	a7, a3, EXC_TABLE_KSTK
+
+	/* restore context of the task that 'next' addresses */
+
+	l32i	a0, a13, THREAD_RA	# restore return address
+	l32i	a1, a13, THREAD_SP	# restore stack pointer
+
+	load_xtregs_user a5 a6 a8 a9 a10 a11 THREAD_XTREGS_USER
+
+	wsr	a14, PS
+	mov	a2, a12			# return 'prev'
+	rsync
+
+	retw
+
+
+ENTRY(ret_from_fork)
+
+	/* void schedule_tail (struct task_struct *prev)
+	 * Note: prev is still in a6 (return value from fake call4 frame)
+	 */
+	movi	a4, schedule_tail
+	callx4	a4
+
+	movi	a4, do_syscall_trace_leave
+	mov	a6, a1
+	callx4	a4
+
+	j	common_exception_return
+
diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S
new file mode 100644
index 00000000..3ef91a73
--- /dev/null
+++ b/arch/xtensa/kernel/head.S
@@ -0,0 +1,244 @@
+/*
+ * arch/xtensa/kernel/head.S
+ *
+ * Xtensa Processor startup code.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ *
+ * Chris Zankel <chris@zankel.net>
+ * Marc Gauthier <marc@tensilica.com, marc@alumni.uwaterloo.ca>
+ * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com>
+ * Kevin Chea
+ */
+
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cacheasm.h>
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+
+/*
+ * This module contains the entry code for kernel images. It performs the
+ * minimal setup needed to call the generic C routines.
+ *
+ * Prerequisites:
+ *
+ * - The kernel image has been loaded to the actual address where it was
+ *   compiled to.
+ * - a2 contains either 0 or a pointer to a list of boot parameters.
+ *   (see setup.c for more details)
+ *
+ */
+
+/*
+ *  _start
+ *
+ *  The bootloader passes a pointer to a list of boot parameters in a2.
+ */
+
+	/* The first bytes of the kernel image must be an instruction, so we
+	 * manually allocate and define the literal constant we need for a jx
+	 * instruction.
+	 */
+
+	__HEAD
+	.globl _start
+_start:	_j	2f
+	.align	4
+1:	.word	_startup
+2:	l32r	a0, 1b
+	jx	a0
+
+	.section .init.text, "ax"
+	.align 4
+_startup:
+
+	/* Disable interrupts and exceptions. */
+
+	movi	a0, LOCKLEVEL
+	wsr	a0, PS
+
+	/* Preserve the pointer to the boot parameter list in EXCSAVE_1 */
+
+	wsr	a2, EXCSAVE_1
+
+	/* Start with a fresh windowbase and windowstart.  */
+
+	movi	a1, 1
+	movi	a0, 0
+	wsr	a1, WINDOWSTART
+	wsr	a0, WINDOWBASE
+	rsync
+
+	/* Set a0 to 0 for the remaining initialization. */
+
+	movi	a0, 0
+
+	/* Clear debugging registers. */
+
+#if XCHAL_HAVE_DEBUG
+	wsr	a0, IBREAKENABLE
+	wsr	a0, ICOUNT
+	movi	a1, 15
+	wsr	a0, ICOUNTLEVEL
+
+	.set	_index, 0
+	.rept	XCHAL_NUM_DBREAK - 1
+	wsr	a0, DBREAKC + _index
+	.set	_index, _index + 1
+	.endr
+#endif
+
+	/* Clear CCOUNT (not really necessary, but nice) */
+
+	wsr	a0, CCOUNT	# not really necessary, but nice
+
+	/* Disable zero-loops. */
+
+#if XCHAL_HAVE_LOOPS
+	wsr	a0, LCOUNT
+#endif
+
+	/* Disable all timers. */
+
+	.set	_index, 0
+	.rept	XCHAL_NUM_TIMERS - 1
+	wsr	a0, CCOMPARE + _index
+	.set	_index, _index + 1
+	.endr
+
+	/* Interrupt initialization. */
+
+	movi	a2, XCHAL_INTTYPE_MASK_SOFTWARE | XCHAL_INTTYPE_MASK_EXTERN_EDGE
+	wsr	a0, INTENABLE
+	wsr	a2, INTCLEAR
+
+	/* Disable coprocessors. */
+
+#if XCHAL_CP_NUM > 0
+	wsr	a0, CPENABLE
+#endif
+
+	/* Set PS.INTLEVEL=1, PS.WOE=0, kernel stack, PS.EXCM=0
+	 *
+	 * Note: PS.EXCM must be cleared before using any loop
+	 *	 instructions; otherwise, they are silently disabled, and
+	 * 	 at most one iteration of the loop is executed.
+	 */
+
+	movi	a1, 1
+	wsr	a1, PS
+	rsync
+
+	/*  Initialize the caches.
+	 *  a2, a3 are just working registers (clobbered).
+	 */
+
+#if XCHAL_DCACHE_LINE_LOCKABLE
+	___unlock_dcache_all a2 a3
+#endif
+
+#if XCHAL_ICACHE_LINE_LOCKABLE
+	___unlock_icache_all a2 a3
+#endif
+
+	___invalidate_dcache_all a2 a3
+	___invalidate_icache_all a2 a3
+
+	isync
+
+	/* Unpack data sections
+	 *
+	 * The linker script used to build the Linux kernel image
+	 * creates a table located at __boot_reloc_table_start
+	 * that contans the information what data needs to be unpacked.
+	 *
+	 * Uses a2-a7.
+	 */
+
+	movi	a2, __boot_reloc_table_start
+	movi	a3, __boot_reloc_table_end
+
+1:	beq	a2, a3, 3f	# no more entries?
+	l32i	a4, a2, 0	# start destination (in RAM)
+	l32i	a5, a2, 4	# end desination (in RAM)
+	l32i	a6, a2, 8	# start source (in ROM)
+	addi	a2, a2, 12	# next entry
+	beq	a4, a5, 1b	# skip, empty entry
+	beq	a4, a6, 1b	# skip, source and dest. are the same
+
+2:	l32i	a7, a6, 0	# load word
+	addi	a6, a6, 4
+	s32i	a7, a4, 0	# store word
+	addi	a4, a4, 4
+	bltu	a4, a5, 2b
+	j	1b
+
+3:
+	/* All code and initialized data segments have been copied.
+	 * Now clear the BSS segment.
+	 */
+
+	movi	a2, __bss_start	# start of BSS
+	movi	a3, __bss_stop	# end of BSS
+
+	__loopt	a2, a3, a4, 2
+	s32i	a0, a2, 0
+	__endla	a2, a4, 4
+
+#if XCHAL_DCACHE_IS_WRITEBACK
+
+	/* After unpacking, flush the writeback cache to memory so the
+	 * instructions/data are available.
+	 */
+
+	___flush_dcache_all a2 a3
+#endif
+
+	/* Setup stack and enable window exceptions (keep irqs disabled) */
+
+	movi	a1, init_thread_union
+	addi	a1, a1, KERNEL_STACK_SIZE
+
+	movi	a2, 0x00040001		# WOE=1, INTLEVEL=1, UM=0
+	wsr	a2, PS			# (enable reg-windows; progmode stack)
+	rsync
+
+	/* Set up EXCSAVE[DEBUGLEVEL] to point to the Debug Exception Handler.*/
+
+	movi	a2, debug_exception
+	wsr	a2, EXCSAVE + XCHAL_DEBUGLEVEL
+
+	/* Set up EXCSAVE[1] to point to the exc_table. */
+
+	movi	a6, exc_table
+	xsr	a6, EXCSAVE_1
+
+	/* init_arch kick-starts the linux kernel */
+
+	movi	a4, init_arch
+	callx4	a4
+
+	movi	a4, start_kernel
+	callx4	a4
+
+should_never_return:
+	j	should_never_return
+
+
+/*
+ * BSS section
+ */
+	
+__PAGE_ALIGNED_BSS
+#ifdef CONFIG_MMU
+ENTRY(swapper_pg_dir)
+	.fill	PAGE_SIZE, 1, 0
+#endif
+ENTRY(empty_zero_page)
+	.fill	PAGE_SIZE, 1, 0
diff --git a/arch/xtensa/kernel/init_task.c b/arch/xtensa/kernel/init_task.c
new file mode 100644
index 00000000..cd122fb7
--- /dev/null
+++ b/arch/xtensa/kernel/init_task.c
@@ -0,0 +1,31 @@
+/*
+ * arch/xtensa/kernel/init_task.c
+ *
+ * Xtensa Processor version.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 Tensilica Inc.
+ *
+ * Chris Zankel <chris@zankel.net>
+ */
+
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/init_task.h>
+#include <linux/module.h>
+#include <linux/mqueue.h>
+
+#include <asm/uaccess.h>
+
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+union thread_union init_thread_union __init_task_data =
+	{ INIT_THREAD_INFO(init_task) };
+
+struct task_struct init_task = INIT_TASK(init_task);
+
+EXPORT_SYMBOL(init_task);
diff --git a/arch/xtensa/kernel/io.c b/arch/xtensa/kernel/io.c
new file mode 100644
index 00000000..5b65269b
--- /dev/null
+++ b/arch/xtensa/kernel/io.c
@@ -0,0 +1,75 @@
+/*
+ * arch/xtensa/io.c
+ *
+ * IO primitives
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Copied from sparc.
+ *
+ * Chris Zankel <chris@zankel.net>
+ *
+ */
+
+#include <asm/io.h>
+#include <asm/byteorder.h>
+
+void outsb(unsigned long addr, const void *src, unsigned long count) {
+        while (count) {
+                count -= 1;
+                writeb(*(const char *)src, addr);
+                src += 1;
+                addr += 1;
+        }
+}
+
+void outsw(unsigned long addr, const void *src, unsigned long count) {
+        while (count) {
+                count -= 2;
+                writew(*(const short *)src, addr);
+                src += 2;
+                addr += 2;
+        }
+}
+
+void outsl(unsigned long addr, const void *src, unsigned long count) {
+        while (count) {
+                count -= 4;
+                writel(*(const long *)src, addr);
+                src += 4;
+                addr += 4;
+        }
+}
+
+void insb(unsigned long addr, void *dst, unsigned long count) {
+        while (count) {
+                count -= 1;
+                *(unsigned char *)dst = readb(addr);
+                dst += 1;
+                addr += 1;
+        }
+}
+
+void insw(unsigned long addr, void *dst, unsigned long count) {
+        while (count) {
+                count -= 2;
+                *(unsigned short *)dst = readw(addr);
+                dst += 2;
+                addr += 2;
+        }
+}
+
+void insl(unsigned long addr, void *dst, unsigned long count) {
+        while (count) {
+                count -= 4;
+                /*
+                 * XXX I am sure we are in for an unaligned trap here.
+                 */
+                *(unsigned long *)dst = readl(addr);
+                dst += 4;
+                addr += 4;
+        }
+}
diff --git a/arch/xtensa/kernel/irq.c b/arch/xtensa/kernel/irq.c
new file mode 100644
index 00000000..4340ee07
--- /dev/null
+++ b/arch/xtensa/kernel/irq.c
@@ -0,0 +1,151 @@
+/*
+ * linux/arch/xtensa/kernel/irq.c
+ *
+ * Xtensa built-in interrupt controller and some generic functions copied
+ * from i386.
+ *
+ * Copyright (C) 2002 - 2006 Tensilica, Inc.
+ * Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar
+ *
+ *
+ * Chris Zankel <chris@zankel.net>
+ * Kevin Chea
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/uaccess.h>
+#include <asm/platform.h>
+
+static unsigned int cached_irq_mask;
+
+atomic_t irq_err_count;
+
+/*
+ * do_IRQ handles all normal device IRQ's (the special
+ * SMP cross-CPU interrupts have their own specific
+ * handlers).
+ */
+
+asmlinkage void do_IRQ(int irq, struct pt_regs *regs)
+{
+	struct pt_regs *old_regs = set_irq_regs(regs);
+
+	if (irq >= NR_IRQS) {
+		printk(KERN_EMERG "%s: cannot handle IRQ %d\n",
+				__func__, irq);
+	}
+
+	irq_enter();
+
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
+	/* Debugging check for stack overflow: is there less than 1KB free? */
+	{
+		unsigned long sp;
+
+		__asm__ __volatile__ ("mov %0, a1\n" : "=a" (sp));
+		sp &= THREAD_SIZE - 1;
+
+		if (unlikely(sp < (sizeof(thread_info) + 1024)))
+			printk("Stack overflow in do_IRQ: %ld\n",
+			       sp - sizeof(struct thread_info));
+	}
+#endif
+	generic_handle_irq(irq);
+
+	irq_exit();
+	set_irq_regs(old_regs);
+}
+
+int arch_show_interrupts(struct seq_file *p, int prec)
+{
+	seq_printf(p, "%*s: ", prec, "ERR");
+	seq_printf(p, "%10u\n", atomic_read(&irq_err_count));
+	return 0;
+}
+
+static void xtensa_irq_mask(struct irq_data *d)
+{
+	cached_irq_mask &= ~(1 << d->irq);
+	set_sr (cached_irq_mask, INTENABLE);
+}
+
+static void xtensa_irq_unmask(struct irq_data *d)
+{
+	cached_irq_mask |= 1 << d->irq;
+	set_sr (cached_irq_mask, INTENABLE);
+}
+
+static void xtensa_irq_enable(struct irq_data *d)
+{
+	variant_irq_enable(d->irq);
+	xtensa_irq_unmask(d->irq);
+}
+
+static void xtensa_irq_disable(struct irq_data *d)
+{
+	xtensa_irq_mask(d->irq);
+	variant_irq_disable(d->irq);
+}
+
+static void xtensa_irq_ack(struct irq_data *d)
+{
+	set_sr(1 << d->irq, INTCLEAR);
+}
+
+static int xtensa_irq_retrigger(struct irq_data *d)
+{
+	set_sr (1 << d->irq, INTSET);
+	return 1;
+}
+
+
+static struct irq_chip xtensa_irq_chip = {
+	.name		= "xtensa",
+	.irq_enable	= xtensa_irq_enable,
+	.irq_disable	= xtensa_irq_disable,
+	.irq_mask	= xtensa_irq_mask,
+	.irq_unmask	= xtensa_irq_unmask,
+	.irq_ack	= xtensa_irq_ack,
+	.irq_retrigger	= xtensa_irq_retrigger,
+};
+
+void __init init_IRQ(void)
+{
+	int index;
+
+	for (index = 0; index < XTENSA_NR_IRQS; index++) {
+		int mask = 1 << index;
+
+		if (mask & XCHAL_INTTYPE_MASK_SOFTWARE)
+			irq_set_chip_and_handler(index, &xtensa_irq_chip,
+						 handle_simple_irq);
+
+		else if (mask & XCHAL_INTTYPE_MASK_EXTERN_EDGE)
+			irq_set_chip_and_handler(index, &xtensa_irq_chip,
+						 handle_edge_irq);
+
+		else if (mask & XCHAL_INTTYPE_MASK_EXTERN_LEVEL)
+			irq_set_chip_and_handler(index, &xtensa_irq_chip,
+						 handle_level_irq);
+
+		else if (mask & XCHAL_INTTYPE_MASK_TIMER)
+			irq_set_chip_and_handler(index, &xtensa_irq_chip,
+						 handle_edge_irq);
+
+		else	/* XCHAL_INTTYPE_MASK_WRITE_ERROR */
+			/* XCHAL_INTTYPE_MASK_NMI */
+
+			irq_set_chip_and_handler(index, &xtensa_irq_chip,
+						 handle_level_irq);
+	}
+
+	cached_irq_mask = 0;
+
+	variant_init_irq();
+}
diff --git a/arch/xtensa/kernel/module.c b/arch/xtensa/kernel/module.c
new file mode 100644
index 00000000..c1accea8
--- /dev/null
+++ b/arch/xtensa/kernel/module.c
@@ -0,0 +1,235 @@
+/*
+ * arch/xtensa/kernel/module.c
+ *
+ * Module support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2006 Tensilica Inc.
+ *
+ * Chris Zankel <chris@zankel.net>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/cache.h>
+
+#undef DEBUG_RELOCATE
+
+void *module_alloc(unsigned long size)
+{
+	if (size == 0)
+		return NULL;
+	return vmalloc_exec(size);
+}
+
+void module_free(struct module *mod, void *module_region)
+{
+	vfree(module_region);
+}
+
+int module_frob_arch_sections(Elf32_Ehdr *hdr,
+    			      Elf32_Shdr *sechdrs,
+			      char *secstrings,
+			      struct module *mod)
+{
+	return 0;
+}
+
+static int
+decode_calln_opcode (unsigned char *location)
+{
+#ifdef __XTENSA_EB__
+	return (location[0] & 0xf0) == 0x50;
+#endif
+#ifdef __XTENSA_EL__
+	return (location[0] & 0xf) == 0x5;
+#endif
+}
+
+static int
+decode_l32r_opcode (unsigned char *location)
+{
+#ifdef __XTENSA_EB__
+	return (location[0] & 0xf0) == 0x10;
+#endif
+#ifdef __XTENSA_EL__
+	return (location[0] & 0xf) == 0x1;
+#endif
+}
+
+int apply_relocate(Elf32_Shdr *sechdrs,
+    		   const char *strtab,
+		   unsigned int symindex,
+		   unsigned int relsec,
+		   struct module *mod)
+{
+        printk(KERN_ERR "module %s: REL RELOCATION unsupported\n",
+               mod->name);
+        return -ENOEXEC;
+
+}
+
+int apply_relocate_add(Elf32_Shdr *sechdrs,
+		       const char *strtab,
+		       unsigned int symindex,
+		       unsigned int relsec,
+		       struct module *mod)
+{
+	unsigned int i;
+        Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
+	Elf32_Sym *sym;
+	unsigned char *location;
+	uint32_t value;
+
+#ifdef DEBUG_RELOCATE
+	printk("Applying relocate section %u to %u\n", relsec,
+	       sechdrs[relsec].sh_info);
+#endif
+	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) {
+		location = (char *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+			+ rela[i].r_offset;
+		sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+			+ ELF32_R_SYM(rela[i].r_info);
+		value = sym->st_value + rela[i].r_addend;
+
+		switch (ELF32_R_TYPE(rela[i].r_info)) {
+		case R_XTENSA_NONE:
+		case R_XTENSA_DIFF8:
+		case R_XTENSA_DIFF16:
+		case R_XTENSA_DIFF32:
+		case R_XTENSA_ASM_EXPAND:
+			break;
+
+		case R_XTENSA_32:
+		case R_XTENSA_PLT:
+			*(uint32_t *)location += value;
+			break;
+
+		case R_XTENSA_SLOT0_OP:
+			if (decode_calln_opcode(location)) {
+				value -= ((unsigned long)location & -4) + 4;
+				if ((value & 3) != 0 ||
+				    ((value + (1 << 19)) >> 20) != 0) {
+					printk("%s: relocation out of range, "
+					       "section %d reloc %d "
+					       "sym '%s'\n",
+					       mod->name, relsec, i,
+					       strtab + sym->st_name);
+					return -ENOEXEC;
+				}
+				value = (signed int)value >> 2;
+#ifdef __XTENSA_EB__
+				location[0] = ((location[0] & ~0x3) |
+					    ((value >> 16) & 0x3));
+				location[1] = (value >> 8) & 0xff;
+				location[2] = value & 0xff;
+#endif
+#ifdef __XTENSA_EL__
+				location[0] = ((location[0] & ~0xc0) |
+					    ((value << 6) & 0xc0));
+				location[1] = (value >> 2) & 0xff;
+				location[2] = (value >> 10) & 0xff;
+#endif
+			} else if (decode_l32r_opcode(location)) {
+				value -= (((unsigned long)location + 3) & -4);
+				if ((value & 3) != 0 ||
+				    (signed int)value >> 18 != -1) {
+					printk("%s: relocation out of range, "
+					       "section %d reloc %d "
+					       "sym '%s'\n",
+					       mod->name, relsec, i,
+					       strtab + sym->st_name);
+					return -ENOEXEC;
+				}
+				value = (signed int)value >> 2;
+
+#ifdef __XTENSA_EB__
+				location[1] = (value >> 8) & 0xff;
+				location[2] = value & 0xff;
+#endif
+#ifdef __XTENSA_EL__
+				location[1] = value & 0xff;
+				location[2] = (value >> 8) & 0xff;
+#endif
+			}
+			/* FIXME: Ignore any other opcodes.  The Xtensa
+			   assembler currently assumes that the linker will
+			   always do relaxation and so all PC-relative
+			   operands need relocations.  (The assembler also
+			   writes out the tentative PC-relative values,
+			   assuming no link-time relaxation, so it is usually
+			   safe to ignore the relocations.)  If the
+			   assembler's "--no-link-relax" flag can be made to
+			   work, and if all kernel modules can be assembled
+			   with that flag, then unexpected relocations could
+			   be detected here.  */
+			break;
+
+		case R_XTENSA_SLOT1_OP:
+		case R_XTENSA_SLOT2_OP:
+		case R_XTENSA_SLOT3_OP:
+		case R_XTENSA_SLOT4_OP:
+		case R_XTENSA_SLOT5_OP:
+		case R_XTENSA_SLOT6_OP:
+		case R_XTENSA_SLOT7_OP:
+		case R_XTENSA_SLOT8_OP:
+		case R_XTENSA_SLOT9_OP:
+		case R_XTENSA_SLOT10_OP:
+		case R_XTENSA_SLOT11_OP:
+		case R_XTENSA_SLOT12_OP:
+		case R_XTENSA_SLOT13_OP:
+		case R_XTENSA_SLOT14_OP:
+			printk("%s: unexpected FLIX relocation: %u\n",
+			       mod->name,
+			       ELF32_R_TYPE(rela[i].r_info));
+			return -ENOEXEC;
+
+		case R_XTENSA_SLOT0_ALT:
+		case R_XTENSA_SLOT1_ALT:
+		case R_XTENSA_SLOT2_ALT:
+		case R_XTENSA_SLOT3_ALT:
+		case R_XTENSA_SLOT4_ALT:
+		case R_XTENSA_SLOT5_ALT:
+		case R_XTENSA_SLOT6_ALT:
+		case R_XTENSA_SLOT7_ALT:
+		case R_XTENSA_SLOT8_ALT:
+		case R_XTENSA_SLOT9_ALT:
+		case R_XTENSA_SLOT10_ALT:
+		case R_XTENSA_SLOT11_ALT:
+		case R_XTENSA_SLOT12_ALT:
+		case R_XTENSA_SLOT13_ALT:
+		case R_XTENSA_SLOT14_ALT:
+			printk("%s: unexpected ALT relocation: %u\n",
+			       mod->name,
+			       ELF32_R_TYPE(rela[i].r_info));
+			return -ENOEXEC;
+
+		default:
+			printk("%s: unexpected relocation: %u\n",
+			       mod->name,
+			       ELF32_R_TYPE(rela[i].r_info));
+			return -ENOEXEC;
+		}
+	}
+	return 0;
+}
+
+int module_finalize(const Elf_Ehdr *hdr,
+    		    const Elf_Shdr *sechdrs,
+		    struct module *mod)
+{
+	return 0;
+}
+
+void module_arch_cleanup(struct module *mod)
+{
+}
diff --git a/arch/xtensa/kernel/pci-dma.c b/arch/xtensa/kernel/pci-dma.c
new file mode 100644
index 00000000..2783fda7
--- /dev/null
+++ b/arch/xtensa/kernel/pci-dma.c
@@ -0,0 +1,94 @@
+/*
+ * arch/xtensa/kernel/pci-dma.c
+ *
+ * DMA coherent memory allocation.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Copyright (C) 2002 - 2005 Tensilica Inc.
+ *
+ * Based on version for i386.
+ *
+ * Chris Zankel <chris@zankel.net>
+ * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com>
+ */
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/pci.h>
+#include <linux/gfp.h>
+#include <asm/io.h>
+#include <asm/cacheflush.h>
+
+/*
+ * Note: We assume that the full memory space is always mapped to 'kseg'
+ *	 Otherwise we have to use page attributes (not implemented).
+ */
+
+void *
+dma_alloc_coherent(struct device *dev,size_t size,dma_addr_t *handle,gfp_t flag)
+{
+	unsigned long ret;
+	unsigned long uncached = 0;
+
+	/* ignore region speicifiers */
+
+	flag &= ~(__GFP_DMA | __GFP_HIGHMEM);
+
+	if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff))
+		flag |= GFP_DMA;
+	ret = (unsigned long)__get_free_pages(flag, get_order(size));
+
+	if (ret == 0)
+		return NULL;
+
+	/* We currently don't support coherent memory outside KSEG */
+
+	if (ret < XCHAL_KSEG_CACHED_VADDR
+	    || ret >= XCHAL_KSEG_CACHED_VADDR + XCHAL_KSEG_SIZE)
+		BUG();
+
+
+	if (ret != 0) {
+		memset((void*) ret, 0, size);
+		uncached = ret+XCHAL_KSEG_BYPASS_VADDR-XCHAL_KSEG_CACHED_VADDR;
+		*handle = virt_to_bus((void*)ret);
+		__flush_invalidate_dcache_range(ret, size);
+	}
+
+	return (void*)uncached;
+}
+
+void dma_free_coherent(struct device *hwdev, size_t size,
+			 void *vaddr, dma_addr_t dma_handle)
+{
+	long addr=(long)vaddr+XCHAL_KSEG_CACHED_VADDR-XCHAL_KSEG_BYPASS_VADDR;
+
+	if (addr < 0 || addr >= XCHAL_KSEG_SIZE)
+		BUG();
+
+	free_pages(addr, get_order(size));
+}
+
+
+void consistent_sync(void *vaddr, size_t size, int direction)
+{
+	switch (direction) {
+	case PCI_DMA_NONE:
+		BUG();
+	case PCI_DMA_FROMDEVICE:        /* invalidate only */
+		__invalidate_dcache_range((unsigned long)vaddr,
+				          (unsigned long)size);
+		break;
+
+	case PCI_DMA_TODEVICE:          /* writeback only */
+	case PCI_DMA_BIDIRECTIONAL:     /* writeback and invalidate */
+		__flush_invalidate_dcache_range((unsigned long)vaddr,
+				    		(unsigned long)size);
+		break;
+	}
+}
diff --git a/arch/xtensa/kernel/pci.c b/arch/xtensa/kernel/pci.c
new file mode 100644
index 00000000..cd102693
--- /dev/null
+++ b/arch/xtensa/kernel/pci.c
@@ -0,0 +1,395 @@
+/*
+ * arch/xtensa/kernel/pci.c
+ *
+ * PCI bios-type initialisation for PCI machines
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Copyright (C) 2001-2005 Tensilica Inc.
+ *
+ * Based largely on work from Cort (ppc/kernel/pci.c)
+ * IO functions copied from sparc.
+ *
+ * Chris Zankel <chris@zankel.net>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/bootmem.h>
+
+#include <asm/pci-bridge.h>
+#include <asm/platform.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+/* PCI Controller */
+
+
+/*
+ * pcibios_alloc_controller
+ * pcibios_enable_device
+ * pcibios_fixups
+ * pcibios_align_resource
+ * pcibios_fixup_bus
+ * pcibios_setup
+ * pci_bus_add_device
+ * pci_mmap_page_range
+ */
+
+struct pci_controller* pci_ctrl_head;
+struct pci_controller** pci_ctrl_tail = &pci_ctrl_head;
+
+static int pci_bus_count;
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
+		       resource_size_t size, resource_size_t align)
+{
+	struct pci_dev *dev = data;
+	resource_size_t start = res->start;
+
+	if (res->flags & IORESOURCE_IO) {
+		if (size > 0x100) {
+			printk(KERN_ERR "PCI: I/O Region %s/%d too large"
+			       " (%ld bytes)\n", pci_name(dev),
+			       dev->resource - res, size);
+		}
+
+		if (start & 0x300)
+			start = (start + 0x3ff) & ~0x3ff;
+	}
+
+	return start;
+}
+
+int
+pcibios_enable_resources(struct pci_dev *dev, int mask)
+{
+	u16 cmd, old_cmd;
+	int idx;
+	struct resource *r;
+
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	old_cmd = cmd;
+	for(idx=0; idx<6; idx++) {
+		r = &dev->resource[idx];
+		if (!r->start && r->end) {
+			printk (KERN_ERR "PCI: Device %s not available because "
+				"of resource collisions\n", pci_name(dev));
+			return -EINVAL;
+		}
+		if (r->flags & IORESOURCE_IO)
+			cmd |= PCI_COMMAND_IO;
+		if (r->flags & IORESOURCE_MEM)
+			cmd |= PCI_COMMAND_MEMORY;
+	}
+	if (dev->resource[PCI_ROM_RESOURCE].start)
+		cmd |= PCI_COMMAND_MEMORY;
+	if (cmd != old_cmd) {
+		printk("PCI: Enabling device %s (%04x -> %04x)\n",
+			pci_name(dev), old_cmd, cmd);
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+	}
+	return 0;
+}
+
+struct pci_controller * __init pcibios_alloc_controller(void)
+{
+	struct pci_controller *pci_ctrl;
+
+	pci_ctrl = (struct pci_controller *)alloc_bootmem(sizeof(*pci_ctrl));
+	memset(pci_ctrl, 0, sizeof(struct pci_controller));
+
+	*pci_ctrl_tail = pci_ctrl;
+	pci_ctrl_tail = &pci_ctrl->next;
+
+	return pci_ctrl;
+}
+
+static int __init pcibios_init(void)
+{
+	struct pci_controller *pci_ctrl;
+	struct pci_bus *bus;
+	int next_busno = 0, i;
+
+	printk("PCI: Probing PCI hardware\n");
+
+	/* Scan all of the recorded PCI controllers.  */
+	for (pci_ctrl = pci_ctrl_head; pci_ctrl; pci_ctrl = pci_ctrl->next) {
+		pci_ctrl->last_busno = 0xff;
+		bus = pci_scan_bus(pci_ctrl->first_busno, pci_ctrl->ops,
+				   pci_ctrl);
+		if (pci_ctrl->io_resource.flags) {
+			unsigned long offs;
+
+			offs = (unsigned long)pci_ctrl->io_space.base;
+			pci_ctrl->io_resource.start += offs;
+			pci_ctrl->io_resource.end += offs;
+			bus->resource[0] = &pci_ctrl->io_resource;
+		}
+		for (i = 0; i < 3; ++i)
+			if (pci_ctrl->mem_resources[i].flags)
+				bus->resource[i+1] =&pci_ctrl->mem_resources[i];
+		pci_ctrl->bus = bus;
+		pci_ctrl->last_busno = bus->subordinate;
+		if (next_busno <= pci_ctrl->last_busno)
+			next_busno = pci_ctrl->last_busno+1;
+	}
+	pci_bus_count = next_busno;
+
+	return platform_pcibios_fixup();
+}
+
+subsys_initcall(pcibios_init);
+
+void __init pcibios_fixup_bus(struct pci_bus *bus)
+{
+	struct pci_controller *pci_ctrl = bus->sysdata;
+	struct resource *res;
+	unsigned long io_offset;
+	int i;
+
+	io_offset = (unsigned long)pci_ctrl->io_space.base;
+	if (bus->parent == NULL) {
+		/* this is a host bridge - fill in its resources */
+		pci_ctrl->bus = bus;
+
+		bus->resource[0] = res = &pci_ctrl->io_resource;
+		if (!res->flags) {
+			if (io_offset)
+				printk (KERN_ERR "I/O resource not set for host"
+					" bridge %d\n", pci_ctrl->index);
+			res->start = 0;
+			res->end = IO_SPACE_LIMIT;
+			res->flags = IORESOURCE_IO;
+		}
+		res->start += io_offset;
+		res->end += io_offset;
+
+		for (i = 0; i < 3; i++) {
+			res = &pci_ctrl->mem_resources[i];
+			if (!res->flags) {
+				if (i > 0)
+					continue;
+				printk(KERN_ERR "Memory resource not set for "
+				       "host bridge %d\n", pci_ctrl->index);
+				res->start = 0;
+				res->end = ~0U;
+				res->flags = IORESOURCE_MEM;
+			}
+			bus->resource[i+1] = res;
+		}
+	} else {
+		/* This is a subordinate bridge */
+		pci_read_bridge_bases(bus);
+
+		for (i = 0; i < 4; i++) {
+			if ((res = bus->resource[i]) == NULL || !res->flags)
+				continue;
+			if (io_offset && (res->flags & IORESOURCE_IO)) {
+				res->start += io_offset;
+				res->end += io_offset;
+			}
+		}
+	}
+}
+
+char __init *pcibios_setup(char *str)
+{
+	return str;
+}
+
+/* the next one is stolen from the alpha port... */
+
+void __init
+pcibios_update_irq(struct pci_dev *dev, int irq)
+{
+	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+}
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+	u16 cmd, old_cmd;
+	int idx;
+	struct resource *r;
+
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	old_cmd = cmd;
+	for (idx=0; idx<6; idx++) {
+		r = &dev->resource[idx];
+		if (!r->start && r->end) {
+			printk(KERN_ERR "PCI: Device %s not available because "
+			       "of resource collisions\n", pci_name(dev));
+			return -EINVAL;
+		}
+		if (r->flags & IORESOURCE_IO)
+			cmd |= PCI_COMMAND_IO;
+		if (r->flags & IORESOURCE_MEM)
+			cmd |= PCI_COMMAND_MEMORY;
+	}
+	if (cmd != old_cmd) {
+		printk("PCI: Enabling device %s (%04x -> %04x)\n",
+		       pci_name(dev), old_cmd, cmd);
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PROC_FS
+
+/*
+ * Return the index of the PCI controller for device pdev.
+ */
+
+int
+pci_controller_num(struct pci_dev *dev)
+{
+	struct pci_controller *pci_ctrl = (struct pci_controller*) dev->sysdata;
+	return pci_ctrl->index;
+}
+
+#endif /* CONFIG_PROC_FS */
+
+/*
+ * Platform support for /proc/bus/pci/X/Y mmap()s,
+ * modelled on the sparc64 implementation by Dave Miller.
+ *  -- paulus.
+ */
+
+/*
+ * Adjust vm_pgoff of VMA such that it is the physical page offset
+ * corresponding to the 32-bit pci bus offset for DEV requested by the user.
+ *
+ * Basically, the user finds the base address for his device which he wishes
+ * to mmap.  They read the 32-bit value from the config space base register,
+ * add whatever PAGE_SIZE multiple offset they wish, and feed this into the
+ * offset parameter of mmap on /proc/bus/pci/XXX for that device.
+ *
+ * Returns negative error code on failure, zero on success.
+ */
+static __inline__ int
+__pci_mmap_make_offset(struct pci_dev *dev, struct vm_area_struct *vma,
+		       enum pci_mmap_state mmap_state)
+{
+	struct pci_controller *pci_ctrl = (struct pci_controller*) dev->sysdata;
+	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+	unsigned long io_offset = 0;
+	int i, res_bit;
+
+	if (pci_ctrl == 0)
+		return -EINVAL;		/* should never happen */
+
+	/* If memory, add on the PCI bridge address offset */
+	if (mmap_state == pci_mmap_mem) {
+		res_bit = IORESOURCE_MEM;
+	} else {
+		io_offset = (unsigned long)pci_ctrl->io_space.base;
+		offset += io_offset;
+		res_bit = IORESOURCE_IO;
+	}
+
+	/*
+	 * Check that the offset requested corresponds to one of the
+	 * resources of the device.
+	 */
+	for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+		struct resource *rp = &dev->resource[i];
+		int flags = rp->flags;
+
+		/* treat ROM as memory (should be already) */
+		if (i == PCI_ROM_RESOURCE)
+			flags |= IORESOURCE_MEM;
+
+		/* Active and same type? */
+		if ((flags & res_bit) == 0)
+			continue;
+
+		/* In the range of this resource? */
+		if (offset < (rp->start & PAGE_MASK) || offset > rp->end)
+			continue;
+
+		/* found it! construct the final physical address */
+		if (mmap_state == pci_mmap_io)
+			offset += pci_ctrl->io_space.start - io_offset;
+		vma->vm_pgoff = offset >> PAGE_SHIFT;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+/*
+ * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci
+ * device mapping.
+ */
+static __inline__ void
+__pci_mmap_set_pgprot(struct pci_dev *dev, struct vm_area_struct *vma,
+		      enum pci_mmap_state mmap_state, int write_combine)
+{
+	int prot = pgprot_val(vma->vm_page_prot);
+
+	/* Set to write-through */
+	prot &= ~_PAGE_NO_CACHE;
+#if 0
+	if (!write_combine)
+		prot |= _PAGE_WRITETHRU;
+#endif
+	vma->vm_page_prot = __pgprot(prot);
+}
+
+/*
+ * Perform the actual remap of the pages for a PCI device mapping, as
+ * appropriate for this architecture.  The region in the process to map
+ * is described by vm_start and vm_end members of VMA, the base physical
+ * address is found in vm_pgoff.
+ * The pci device structure is provided so that architectures may make mapping
+ * decisions on a per-device or per-bus basis.
+ *
+ * Returns a negative error code on failure, zero on success.
+ */
+int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+			enum pci_mmap_state mmap_state,
+			int write_combine)
+{
+	int ret;
+
+	ret = __pci_mmap_make_offset(dev, vma, mmap_state);
+	if (ret < 0)
+		return ret;
+
+	__pci_mmap_set_pgprot(dev, vma, mmap_state, write_combine);
+
+	ret = io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+			         vma->vm_end - vma->vm_start,vma->vm_page_prot);
+
+	return ret;
+}
diff --git a/arch/xtensa/kernel/platform.c b/arch/xtensa/kernel/platform.c
new file mode 100644
index 00000000..1b91a97f
--- /dev/null
+++ b/arch/xtensa/kernel/platform.c
@@ -0,0 +1,47 @@
+/*
+ * arch/xtensa/kernel/platform.c
+ *
+ * Default platform functions.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Tensilica Inc.
+ *
+ * Chris Zankel <chris@zankel.net>
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/time.h>
+#include <asm/platform.h>
+#include <asm/timex.h>
+#include <asm/param.h>		/* HZ */
+
+#define _F(r,f,a,b)							\
+	r __platform_##f a b;                                   	\
+	r platform_##f a __attribute__((weak, alias("__platform_"#f)))
+
+/*
+ * Default functions that are used if no platform specific function is defined.
+ * (Please, refer to include/asm-xtensa/platform.h for more information)
+ */
+
+_F(void, setup, (char** cmd), { });
+_F(void, init_irq, (void), { });
+_F(void, restart, (void), { while(1); });
+_F(void, halt, (void), { while(1); });
+_F(void, power_off, (void), { while(1); });
+_F(void, idle, (void), { __asm__ __volatile__ ("waiti 0" ::: "memory"); });
+_F(void, heartbeat, (void), { });
+_F(int,  pcibios_fixup, (void), { return 0; });
+
+#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
+_F(void, calibrate_ccount, (void),
+{
+  printk ("ERROR: Cannot calibrate cpu frequency! Assuming 100MHz.\n");
+  ccount_per_jiffy = 100 * (1000000UL/HZ);
+});
+#endif
+
diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c
new file mode 100644
index 00000000..e3558b9a
--- /dev/null
+++ b/arch/xtensa/kernel/process.c
@@ -0,0 +1,339 @@
+/*
+ * arch/xtensa/kernel/process.c
+ *
+ * Xtensa Processor version.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ *
+ * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com>
+ * Chris Zankel <chris@zankel.net>
+ * Marc Gauthier <marc@tensilica.com, marc@alumni.uwaterloo.ca>
+ * Kevin Chea
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/elf.h>
+#include <linux/init.h>
+#include <linux/prctl.h>
+#include <linux/init_task.h>
+#include <linux/module.h>
+#include <linux/mqueue.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+
+#include <asm/pgtable.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/platform.h>
+#include <asm/mmu.h>
+#include <asm/irq.h>
+#include <asm/atomic.h>
+#include <asm/asm-offsets.h>
+#include <asm/regs.h>
+
+extern void ret_from_fork(void);
+
+struct task_struct *current_set[NR_CPUS] = {&init_task, };
+
+void (*pm_power_off)(void) = NULL;
+EXPORT_SYMBOL(pm_power_off);
+
+
+#if XTENSA_HAVE_COPROCESSORS
+
+void coprocessor_release_all(struct thread_info *ti)
+{
+	unsigned long cpenable;
+	int i;
+
+	/* Make sure we don't switch tasks during this operation. */
+
+	preempt_disable();
+
+	/* Walk through all cp owners and release it for the requested one. */
+
+	cpenable = ti->cpenable;
+
+	for (i = 0; i < XCHAL_CP_MAX; i++) {
+		if (coprocessor_owner[i] == ti) {
+			coprocessor_owner[i] = 0;
+			cpenable &= ~(1 << i);
+		}
+	}
+
+	ti->cpenable = cpenable;
+	coprocessor_clear_cpenable();
+
+	preempt_enable();
+}
+
+void coprocessor_flush_all(struct thread_info *ti)
+{
+	unsigned long cpenable;
+	int i;
+
+	preempt_disable();
+
+	cpenable = ti->cpenable;
+
+	for (i = 0; i < XCHAL_CP_MAX; i++) {
+		if ((cpenable & 1) != 0 && coprocessor_owner[i] == ti)
+			coprocessor_flush(ti, i);
+		cpenable >>= 1;
+	}
+
+	preempt_enable();
+}
+
+#endif
+
+
+/*
+ * Powermanagement idle function, if any is provided by the platform.
+ */
+
+void cpu_idle(void)
+{
+  	local_irq_enable();
+
+	/* endless idle loop with no priority at all */
+	while (1) {
+		while (!need_resched())
+			platform_idle();
+		preempt_enable_no_resched();
+		schedule();
+		preempt_disable();
+	}
+}
+
+/*
+ * This is called when the thread calls exit().
+ */
+void exit_thread(void)
+{
+#if XTENSA_HAVE_COPROCESSORS
+	coprocessor_release_all(current_thread_info());
+#endif
+}
+
+/*
+ * Flush thread state. This is called when a thread does an execve()
+ * Note that we flush coprocessor registers for the case execve fails.
+ */
+void flush_thread(void)
+{
+#if XTENSA_HAVE_COPROCESSORS
+	struct thread_info *ti = current_thread_info();
+	coprocessor_flush_all(ti);
+	coprocessor_release_all(ti);
+#endif
+}
+
+/*
+ * This is called before the thread is copied. 
+ */
+void prepare_to_copy(struct task_struct *tsk)
+{
+#if XTENSA_HAVE_COPROCESSORS
+	coprocessor_flush_all(task_thread_info(tsk));
+#endif
+}
+
+/*
+ * Copy thread.
+ *
+ * The stack layout for the new thread looks like this:
+ *
+ *	+------------------------+ <- sp in childregs (= tos)
+ *	|       childregs        |
+ *	+------------------------+ <- thread.sp = sp in dummy-frame
+ *	|      dummy-frame       |    (saved in dummy-frame spill-area)
+ *	+------------------------+
+ *
+ * We create a dummy frame to return to ret_from_fork:
+ *   a0 points to ret_from_fork (simulating a call4)
+ *   sp points to itself (thread.sp)
+ *   a2, a3 are unused.
+ *
+ * Note: This is a pristine frame, so we don't need any spill region on top of
+ *       childregs.
+ */
+
+int copy_thread(unsigned long clone_flags, unsigned long usp,
+		unsigned long unused,
+                struct task_struct * p, struct pt_regs * regs)
+{
+	struct pt_regs *childregs;
+	struct thread_info *ti;
+	unsigned long tos;
+	int user_mode = user_mode(regs);
+
+	/* Set up new TSS. */
+	tos = (unsigned long)task_stack_page(p) + THREAD_SIZE;
+	if (user_mode)
+		childregs = (struct pt_regs*)(tos - PT_USER_SIZE);
+	else
+		childregs = (struct pt_regs*)tos - 1;
+
+	*childregs = *regs;
+
+	/* Create a call4 dummy-frame: a0 = 0, a1 = childregs. */
+	*((int*)childregs - 3) = (unsigned long)childregs;
+	*((int*)childregs - 4) = 0;
+
+	childregs->areg[1] = tos;
+	childregs->areg[2] = 0;
+	p->set_child_tid = p->clear_child_tid = NULL;
+	p->thread.ra = MAKE_RA_FOR_CALL((unsigned long)ret_from_fork, 0x1);
+	p->thread.sp = (unsigned long)childregs;
+
+	if (user_mode(regs)) {
+
+		int len = childregs->wmask & ~0xf;
+		childregs->areg[1] = usp;
+		memcpy(&childregs->areg[XCHAL_NUM_AREGS - len/4],
+		       &regs->areg[XCHAL_NUM_AREGS - len/4], len);
+// FIXME: we need to set THREADPTR in thread_info...
+		if (clone_flags & CLONE_SETTLS)
+			childregs->areg[2] = childregs->areg[6];
+
+	} else {
+		/* In kernel space, we start a new thread with a new stack. */
+		childregs->wmask = 1;
+	}
+
+#if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS)
+	ti = task_thread_info(p);
+	ti->cpenable = 0;
+#endif
+
+	return 0;
+}
+
+
+/*
+ * These bracket the sleeping functions..
+ */
+
+unsigned long get_wchan(struct task_struct *p)
+{
+	unsigned long sp, pc;
+	unsigned long stack_page = (unsigned long) task_stack_page(p);
+	int count = 0;
+
+	if (!p || p == current || p->state == TASK_RUNNING)
+		return 0;
+
+	sp = p->thread.sp;
+	pc = MAKE_PC_FROM_RA(p->thread.ra, p->thread.sp);
+
+	do {
+		if (sp < stack_page + sizeof(struct task_struct) ||
+		    sp >= (stack_page + THREAD_SIZE) ||
+		    pc == 0)
+			return 0;
+		if (!in_sched_functions(pc))
+			return pc;
+
+		/* Stack layout: sp-4: ra, sp-3: sp' */
+
+		pc = MAKE_PC_FROM_RA(*(unsigned long*)sp - 4, sp);
+		sp = *(unsigned long *)sp - 3;
+	} while (count++ < 16);
+	return 0;
+}
+
+/*
+ * xtensa_gregset_t and 'struct pt_regs' are vastly different formats
+ * of processor registers.  Besides different ordering,
+ * xtensa_gregset_t contains non-live register information that
+ * 'struct pt_regs' does not.  Exception handling (primarily) uses
+ * 'struct pt_regs'.  Core files and ptrace use xtensa_gregset_t.
+ *
+ */
+
+void xtensa_elf_core_copy_regs (xtensa_gregset_t *elfregs, struct pt_regs *regs)
+{
+	unsigned long wb, ws, wm;
+	int live, last;
+
+	wb = regs->windowbase;
+	ws = regs->windowstart;
+	wm = regs->wmask;
+	ws = ((ws >> wb) | (ws << (WSBITS - wb))) & ((1 << WSBITS) - 1);
+
+	/* Don't leak any random bits. */
+
+	memset(elfregs, 0, sizeof (elfregs));
+
+	/* Note:  PS.EXCM is not set while user task is running; its
+	 * being set in regs->ps is for exception handling convenience.
+	 */
+
+	elfregs->pc		= regs->pc;
+	elfregs->ps		= (regs->ps & ~(1 << PS_EXCM_BIT));
+	elfregs->lbeg		= regs->lbeg;
+	elfregs->lend		= regs->lend;
+	elfregs->lcount		= regs->lcount;
+	elfregs->sar		= regs->sar;
+	elfregs->windowstart	= ws;
+
+	live = (wm & 2) ? 4 : (wm & 4) ? 8 : (wm & 8) ? 12 : 16;
+	last = XCHAL_NUM_AREGS - (wm >> 4) * 4;
+	memcpy(elfregs->a, regs->areg, live * 4);
+	memcpy(elfregs->a + last, regs->areg + last, (wm >> 4) * 16);
+}
+
+int dump_fpu(void)
+{
+	return 0;
+}
+
+asmlinkage
+long xtensa_clone(unsigned long clone_flags, unsigned long newsp,
+                  void __user *parent_tid, void *child_tls,
+                  void __user *child_tid, long a5,
+                  struct pt_regs *regs)
+{
+        if (!newsp)
+                newsp = regs->areg[1];
+        return do_fork(clone_flags, newsp, regs, 0, parent_tid, child_tid);
+}
+
+/*
+ * xtensa_execve() executes a new program.
+ */
+
+asmlinkage
+long xtensa_execve(const char __user *name,
+		   const char __user *const __user *argv,
+                   const char __user *const __user *envp,
+                   long a3, long a4, long a5,
+                   struct pt_regs *regs)
+{
+	long error;
+	char * filename;
+
+	filename = getname(name);
+	error = PTR_ERR(filename);
+	if (IS_ERR(filename))
+		goto out;
+	error = do_execve(filename, argv, envp, regs);
+	putname(filename);
+out:
+	return error;
+}
+
diff --git a/arch/xtensa/kernel/ptrace.c b/arch/xtensa/kernel/ptrace.c
new file mode 100644
index 00000000..a0d042aa
--- /dev/null
+++ b/arch/xtensa/kernel/ptrace.c
@@ -0,0 +1,348 @@
+// TODO some minor issues
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2007  Tensilica Inc.
+ *
+ * Joe Taylor	<joe@tensilica.com, joetylr@yahoo.com>
+ * Chris Zankel <chris@zankel.net>
+ * Scott Foehner<sfoehner@yahoo.com>,
+ * Kevin Chea
+ * Marc Gauthier<marc@tensilica.com> <marc@alumni.uwaterloo.ca>
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/smp.h>
+#include <linux/security.h>
+#include <linux/signal.h>
+
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/ptrace.h>
+#include <asm/elf.h>
+#include <asm/coprocessor.h>
+
+
+void user_enable_single_step(struct task_struct *child)
+{
+	child->ptrace |= PT_SINGLESTEP;
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	child->ptrace &= ~PT_SINGLESTEP;
+}
+
+/*
+ * Called by kernel/ptrace.c when detaching to disable single stepping.
+ */
+
+void ptrace_disable(struct task_struct *child)
+{
+	/* Nothing to do.. */
+}
+
+int ptrace_getregs(struct task_struct *child, void __user *uregs)
+{
+	struct pt_regs *regs = task_pt_regs(child);
+	xtensa_gregset_t __user *gregset = uregs;
+	unsigned long wm = regs->wmask;
+	unsigned long wb = regs->windowbase;
+	int live, i;
+
+	if (!access_ok(VERIFY_WRITE, uregs, sizeof(xtensa_gregset_t)))
+		return -EIO;
+
+	__put_user(regs->pc, &gregset->pc);
+	__put_user(regs->ps & ~(1 << PS_EXCM_BIT), &gregset->ps);
+	__put_user(regs->lbeg, &gregset->lbeg);
+	__put_user(regs->lend, &gregset->lend);
+	__put_user(regs->lcount, &gregset->lcount);
+	__put_user(regs->windowstart, &gregset->windowstart);
+	__put_user(regs->windowbase, &gregset->windowbase);
+
+	live = (wm & 2) ? 4 : (wm & 4) ? 8 : (wm & 8) ? 12 : 16;
+
+	for (i = 0; i < live; i++)
+		__put_user(regs->areg[i],gregset->a+((wb*4+i)%XCHAL_NUM_AREGS));
+	for (i = XCHAL_NUM_AREGS - (wm >> 4) * 4; i < XCHAL_NUM_AREGS; i++)
+		__put_user(regs->areg[i],gregset->a+((wb*4+i)%XCHAL_NUM_AREGS));
+
+	return 0;
+}
+
+int ptrace_setregs(struct task_struct *child, void __user *uregs)
+{
+	struct pt_regs *regs = task_pt_regs(child);
+	xtensa_gregset_t *gregset = uregs;
+	const unsigned long ps_mask = PS_CALLINC_MASK | PS_OWB_MASK;
+	unsigned long ps;
+	unsigned long wb;
+
+	if (!access_ok(VERIFY_WRITE, uregs, sizeof(xtensa_gregset_t)))
+		return -EIO;
+
+	__get_user(regs->pc, &gregset->pc);
+	__get_user(ps, &gregset->ps);
+	__get_user(regs->lbeg, &gregset->lbeg);
+	__get_user(regs->lend, &gregset->lend);
+	__get_user(regs->lcount, &gregset->lcount);
+	__get_user(regs->windowstart, &gregset->windowstart);
+	__get_user(wb, &gregset->windowbase);
+
+	regs->ps = (regs->ps & ~ps_mask) | (ps & ps_mask) | (1 << PS_EXCM_BIT);
+
+	if (wb >= XCHAL_NUM_AREGS / 4)
+		return -EFAULT;
+
+	regs->windowbase = wb;
+
+	if (wb != 0 &&  __copy_from_user(regs->areg + XCHAL_NUM_AREGS - wb * 4,
+					 gregset->a, wb * 16))
+		return -EFAULT;
+
+	if (__copy_from_user(regs->areg, gregset->a + wb*4, (WSBITS-wb) * 16))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+int ptrace_getxregs(struct task_struct *child, void __user *uregs)
+{
+	struct pt_regs *regs = task_pt_regs(child);
+	struct thread_info *ti = task_thread_info(child);
+	elf_xtregs_t __user *xtregs = uregs;
+	int ret = 0;
+
+	if (!access_ok(VERIFY_WRITE, uregs, sizeof(elf_xtregs_t)))
+		return -EIO;
+
+#if XTENSA_HAVE_COPROCESSORS
+	/* Flush all coprocessor registers to memory. */
+	coprocessor_flush_all(ti);
+	ret |= __copy_to_user(&xtregs->cp0, &ti->xtregs_cp,
+			      sizeof(xtregs_coprocessor_t));
+#endif
+	ret |= __copy_to_user(&xtregs->opt, &regs->xtregs_opt,
+			      sizeof(xtregs->opt));
+	ret |= __copy_to_user(&xtregs->user,&ti->xtregs_user,
+			      sizeof(xtregs->user));
+
+	return ret ? -EFAULT : 0;
+}
+
+int ptrace_setxregs(struct task_struct *child, void __user *uregs)
+{
+	struct thread_info *ti = task_thread_info(child);
+	struct pt_regs *regs = task_pt_regs(child);
+	elf_xtregs_t *xtregs = uregs;
+	int ret = 0;
+
+	if (!access_ok(VERIFY_READ, uregs, sizeof(elf_xtregs_t)))
+		return -EFAULT;
+
+#if XTENSA_HAVE_COPROCESSORS
+	/* Flush all coprocessors before we overwrite them. */
+	coprocessor_flush_all(ti);
+	coprocessor_release_all(ti);
+
+	ret |= __copy_from_user(&ti->xtregs_cp, &xtregs->cp0, 
+				sizeof(xtregs_coprocessor_t));
+#endif
+	ret |= __copy_from_user(&regs->xtregs_opt, &xtregs->opt,
+				sizeof(xtregs->opt));
+	ret |= __copy_from_user(&ti->xtregs_user, &xtregs->user,
+				sizeof(xtregs->user));
+
+	return ret ? -EFAULT : 0;
+}
+
+int ptrace_peekusr(struct task_struct *child, long regno, long __user *ret)
+{
+	struct pt_regs *regs;
+	unsigned long tmp;
+
+	regs = task_pt_regs(child);
+	tmp = 0;  /* Default return value. */
+
+	switch(regno) {
+
+		case REG_AR_BASE ... REG_AR_BASE + XCHAL_NUM_AREGS - 1:
+			tmp = regs->areg[regno - REG_AR_BASE];
+			break;
+
+		case REG_A_BASE ... REG_A_BASE + 15:
+			tmp = regs->areg[regno - REG_A_BASE];
+			break;
+
+		case REG_PC:
+			tmp = regs->pc;
+			break;
+
+		case REG_PS:
+			/* Note:  PS.EXCM is not set while user task is running;
+			 * its being set in regs is for exception handling
+			 * convenience.  */
+			tmp = (regs->ps & ~(1 << PS_EXCM_BIT));
+			break;
+
+		case REG_WB:
+			break;		/* tmp = 0 */
+
+		case REG_WS:
+		{
+			unsigned long wb = regs->windowbase;
+			unsigned long ws = regs->windowstart;
+			tmp = ((ws>>wb) | (ws<<(WSBITS-wb))) & ((1<<WSBITS)-1);
+			break;
+		}
+		case REG_LBEG:
+			tmp = regs->lbeg;
+			break;
+
+		case REG_LEND:
+			tmp = regs->lend;
+			break;
+
+		case REG_LCOUNT:
+			tmp = regs->lcount;
+			break;
+
+		case REG_SAR:
+			tmp = regs->sar;
+			break;
+
+		case SYSCALL_NR:
+			tmp = regs->syscall;
+			break;
+
+		default:
+			return -EIO;
+	}
+	return put_user(tmp, ret);
+}
+
+int ptrace_pokeusr(struct task_struct *child, long regno, long val)
+{
+	struct pt_regs *regs;
+	regs = task_pt_regs(child);
+
+	switch (regno) {
+		case REG_AR_BASE ... REG_AR_BASE + XCHAL_NUM_AREGS - 1:
+			regs->areg[regno - REG_AR_BASE] = val;
+			break;
+
+		case REG_A_BASE ... REG_A_BASE + 15:
+			regs->areg[regno - REG_A_BASE] = val;
+			break;
+
+		case REG_PC:
+			regs->pc = val;
+			break;
+
+		case SYSCALL_NR:
+			regs->syscall = val;
+			break;
+
+		default:
+			return -EIO;
+	}
+	return 0;
+}
+
+long arch_ptrace(struct task_struct *child, long request,
+		 unsigned long addr, unsigned long data)
+{
+	int ret = -EPERM;
+	void __user *datap = (void __user *) data;
+
+	switch (request) {
+	case PTRACE_PEEKTEXT:	/* read word at location addr. */
+	case PTRACE_PEEKDATA:
+		ret = generic_ptrace_peekdata(child, addr, data);
+		break;
+
+	case PTRACE_PEEKUSR:	/* read register specified by addr. */
+		ret = ptrace_peekusr(child, addr, datap);
+		break;
+
+	case PTRACE_POKETEXT:	/* write the word at location addr. */
+	case PTRACE_POKEDATA:
+		ret = generic_ptrace_pokedata(child, addr, data);
+		break;
+
+	case PTRACE_POKEUSR:	/* write register specified by addr. */
+		ret = ptrace_pokeusr(child, addr, data);
+		break;
+
+	case PTRACE_GETREGS:
+		ret = ptrace_getregs(child, datap);
+		break;
+
+	case PTRACE_SETREGS:
+		ret = ptrace_setregs(child, datap);
+		break;
+
+	case PTRACE_GETXTREGS:
+		ret = ptrace_getxregs(child, datap);
+		break;
+
+	case PTRACE_SETXTREGS:
+		ret = ptrace_setxregs(child, datap);
+		break;
+
+	default:
+		ret = ptrace_request(child, request, addr, data);
+		break;
+	}
+
+	return ret;
+}
+
+void do_syscall_trace(void)
+{
+	/*
+	 * The 0x80 provides a way for the tracing parent to distinguish
+	 * between a syscall stop and SIGTRAP delivery
+	 */
+	ptrace_notify(SIGTRAP|((current->ptrace & PT_TRACESYSGOOD) ? 0x80 : 0));
+
+	/*
+	 * this isn't the same as continuing with a signal, but it will do
+	 * for normal use.  strace only continues with a signal if the
+	 * stopping signal is not SIGTRAP.  -brl
+	 */
+	if (current->exit_code) {
+		send_sig(current->exit_code, current, 1);
+		current->exit_code = 0;
+	}
+}
+
+void do_syscall_trace_enter(struct pt_regs *regs)
+{
+	if (test_thread_flag(TIF_SYSCALL_TRACE)
+			&& (current->ptrace & PT_PTRACED))
+		do_syscall_trace();
+
+#if 0
+	if (unlikely(current->audit_context))
+		audit_syscall_entry(current, AUDIT_ARCH_XTENSA..);
+#endif
+}
+
+void do_syscall_trace_leave(struct pt_regs *regs)
+{
+	if ((test_thread_flag(TIF_SYSCALL_TRACE))
+			&& (current->ptrace & PT_PTRACED))
+		do_syscall_trace();
+}
+
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
new file mode 100644
index 00000000..1e5a034f
--- /dev/null
+++ b/arch/xtensa/kernel/setup.c
@@ -0,0 +1,481 @@
+/*
+ * arch/xtensa/kernel/setup.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995  Linus Torvalds
+ * Copyright (C) 2001 - 2005  Tensilica Inc.
+ *
+ * Chris Zankel	<chris@zankel.net>
+ * Joe Taylor	<joe@tensilica.com, joetylr@yahoo.com>
+ * Kevin Chea
+ * Marc Gauthier<marc@tensilica.com> <marc@alumni.uwaterloo.ca>
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/proc_fs.h>
+#include <linux/screen_info.h>
+#include <linux/bootmem.h>
+#include <linux/kernel.h>
+
+#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
+# include <linux/console.h>
+#endif
+
+#ifdef CONFIG_RTC
+# include <linux/timex.h>
+#endif
+
+#ifdef CONFIG_PROC_FS
+# include <linux/seq_file.h>
+#endif
+
+#include <asm/system.h>
+#include <asm/bootparam.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/timex.h>
+#include <asm/platform.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <asm/param.h>
+
+#include <platform/hardware.h>
+
+#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
+struct screen_info screen_info = { 0, 24, 0, 0, 0, 80, 0, 0, 0, 24, 1, 16};
+#endif
+
+#ifdef CONFIG_BLK_DEV_FD
+extern struct fd_ops no_fd_ops;
+struct fd_ops *fd_ops;
+#endif
+
+extern struct rtc_ops no_rtc_ops;
+struct rtc_ops *rtc_ops;
+
+#ifdef CONFIG_BLK_DEV_INITRD
+extern void *initrd_start;
+extern void *initrd_end;
+extern void *__initrd_start;
+extern void *__initrd_end;
+int initrd_is_mapped = 0;
+extern int initrd_below_start_ok;
+#endif
+
+unsigned char aux_device_present;
+extern unsigned long loops_per_jiffy;
+
+/* Command line specified as configuration option. */
+
+static char __initdata command_line[COMMAND_LINE_SIZE];
+
+#ifdef CONFIG_CMDLINE_BOOL
+static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
+#endif
+
+sysmem_info_t __initdata sysmem;
+
+#ifdef CONFIG_BLK_DEV_INITRD
+int initrd_is_mapped;
+#endif
+
+#ifdef CONFIG_MMU
+extern void init_mmu(void);
+#else
+static inline void init_mmu(void) { }
+#endif
+
+extern void zones_init(void);
+
+/*
+ * Boot parameter parsing.
+ *
+ * The Xtensa port uses a list of variable-sized tags to pass data to
+ * the kernel. The first tag must be a BP_TAG_FIRST tag for the list
+ * to be recognised. The list is terminated with a zero-sized
+ * BP_TAG_LAST tag.
+ */
+
+typedef struct tagtable {
+	u32 tag;
+	int (*parse)(const bp_tag_t*);
+} tagtable_t;
+
+#define __tagtable(tag, fn) static tagtable_t __tagtable_##fn 		\
+	__attribute__((unused, __section__(".taglist"))) = { tag, fn }
+
+/* parse current tag */
+
+static int __init parse_tag_mem(const bp_tag_t *tag)
+{
+	meminfo_t *mi = (meminfo_t*)(tag->data);
+
+	if (mi->type != MEMORY_TYPE_CONVENTIONAL)
+		return -1;
+
+	if (sysmem.nr_banks >= SYSMEM_BANKS_MAX) {
+		printk(KERN_WARNING
+		       "Ignoring memory bank 0x%08lx size %ldKB\n",
+		       (unsigned long)mi->start,
+		       (unsigned long)mi->end - (unsigned long)mi->start);
+		return -EINVAL;
+	}
+	sysmem.bank[sysmem.nr_banks].type  = mi->type;
+	sysmem.bank[sysmem.nr_banks].start = PAGE_ALIGN(mi->start);
+	sysmem.bank[sysmem.nr_banks].end   = mi->end & PAGE_SIZE;
+	sysmem.nr_banks++;
+
+	return 0;
+}
+
+__tagtable(BP_TAG_MEMORY, parse_tag_mem);
+
+#ifdef CONFIG_BLK_DEV_INITRD
+
+static int __init parse_tag_initrd(const bp_tag_t* tag)
+{
+	meminfo_t* mi;
+	mi = (meminfo_t*)(tag->data);
+	initrd_start = (void*)(mi->start);
+	initrd_end = (void*)(mi->end);
+
+	return 0;
+}
+
+__tagtable(BP_TAG_INITRD, parse_tag_initrd);
+
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+static int __init parse_tag_cmdline(const bp_tag_t* tag)
+{
+	strncpy(command_line, (char*)(tag->data), COMMAND_LINE_SIZE);
+	command_line[COMMAND_LINE_SIZE - 1] = '\0';
+	return 0;
+}
+
+__tagtable(BP_TAG_COMMAND_LINE, parse_tag_cmdline);
+
+static int __init parse_bootparam(const bp_tag_t* tag)
+{
+	extern tagtable_t __tagtable_begin, __tagtable_end;
+	tagtable_t *t;
+
+	/* Boot parameters must start with a BP_TAG_FIRST tag. */
+
+	if (tag->id != BP_TAG_FIRST) {
+		printk(KERN_WARNING "Invalid boot parameters!\n");
+		return 0;
+	}
+
+	tag = (bp_tag_t*)((unsigned long)tag + sizeof(bp_tag_t) + tag->size);
+
+	/* Parse all tags. */
+
+	while (tag != NULL && tag->id != BP_TAG_LAST) {
+	 	for (t = &__tagtable_begin; t < &__tagtable_end; t++) {
+			if (tag->id == t->tag) {
+				t->parse(tag);
+				break;
+			}
+		}
+		if (t == &__tagtable_end)
+			printk(KERN_WARNING "Ignoring tag "
+			       "0x%08x\n", tag->id);
+		tag = (bp_tag_t*)((unsigned long)(tag + 1) + tag->size);
+	}
+
+	return 0;
+}
+
+/*
+ * Initialize architecture. (Early stage)
+ */
+
+void __init init_arch(bp_tag_t *bp_start)
+{
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	initrd_start = &__initrd_start;
+	initrd_end = &__initrd_end;
+#endif
+
+	sysmem.nr_banks = 0;
+
+#ifdef CONFIG_CMDLINE_BOOL
+	strcpy(command_line, default_command_line);
+#endif
+
+	/* Parse boot parameters */
+
+        if (bp_start)
+	  parse_bootparam(bp_start);
+
+	if (sysmem.nr_banks == 0) {
+		sysmem.nr_banks = 1;
+		sysmem.bank[0].start = PLATFORM_DEFAULT_MEM_START;
+		sysmem.bank[0].end = PLATFORM_DEFAULT_MEM_START
+				     + PLATFORM_DEFAULT_MEM_SIZE;
+	}
+
+	/* Early hook for platforms */
+
+	platform_init(bp_start);
+
+	/* Initialize MMU. */
+
+	init_mmu();
+}
+
+/*
+ * Initialize system. Setup memory and reserve regions.
+ */
+
+extern char _end;
+extern char _stext;
+extern char _WindowVectors_text_start;
+extern char _WindowVectors_text_end;
+extern char _DebugInterruptVector_literal_start;
+extern char _DebugInterruptVector_text_end;
+extern char _KernelExceptionVector_literal_start;
+extern char _KernelExceptionVector_text_end;
+extern char _UserExceptionVector_literal_start;
+extern char _UserExceptionVector_text_end;
+extern char _DoubleExceptionVector_literal_start;
+extern char _DoubleExceptionVector_text_end;
+
+void __init setup_arch(char **cmdline_p)
+{
+	extern int mem_reserve(unsigned long, unsigned long, int);
+	extern void bootmem_init(void);
+
+	memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
+	boot_command_line[COMMAND_LINE_SIZE-1] = '\0';
+	*cmdline_p = command_line;
+
+	/* Reserve some memory regions */
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (initrd_start < initrd_end) {
+		initrd_is_mapped = mem_reserve(__pa(initrd_start),
+					       __pa(initrd_end), 0);
+		initrd_below_start_ok = 1;
+ 	} else {
+		initrd_start = 0;
+	}
+#endif
+
+	mem_reserve(__pa(&_stext),__pa(&_end), 1);
+
+	mem_reserve(__pa(&_WindowVectors_text_start),
+		    __pa(&_WindowVectors_text_end), 0);
+
+	mem_reserve(__pa(&_DebugInterruptVector_literal_start),
+		    __pa(&_DebugInterruptVector_text_end), 0);
+
+	mem_reserve(__pa(&_KernelExceptionVector_literal_start),
+		    __pa(&_KernelExceptionVector_text_end), 0);
+
+	mem_reserve(__pa(&_UserExceptionVector_literal_start),
+		    __pa(&_UserExceptionVector_text_end), 0);
+
+	mem_reserve(__pa(&_DoubleExceptionVector_literal_start),
+		    __pa(&_DoubleExceptionVector_text_end), 0);
+
+	bootmem_init();
+
+	platform_setup(cmdline_p);
+
+
+	paging_init();
+	zones_init();
+
+#ifdef CONFIG_VT
+# if defined(CONFIG_VGA_CONSOLE)
+	conswitchp = &vga_con;
+# elif defined(CONFIG_DUMMY_CONSOLE)
+	conswitchp = &dummy_con;
+# endif
+#endif
+
+#ifdef CONFIG_PCI
+	platform_pcibios_init();
+#endif
+}
+
+void machine_restart(char * cmd)
+{
+	platform_restart();
+}
+
+void machine_halt(void)
+{
+	platform_halt();
+	while (1);
+}
+
+void machine_power_off(void)
+{
+	platform_power_off();
+	while (1);
+}
+#ifdef CONFIG_PROC_FS
+
+/*
+ * Display some core information through /proc/cpuinfo.
+ */
+
+static int
+c_show(struct seq_file *f, void *slot)
+{
+	/* high-level stuff */
+	seq_printf(f,"processor\t: 0\n"
+		     "vendor_id\t: Tensilica\n"
+		     "model\t\t: Xtensa " XCHAL_HW_VERSION_NAME "\n"
+		     "core ID\t\t: " XCHAL_CORE_ID "\n"
+		     "build ID\t: 0x%x\n"
+		     "byte order\t: %s\n"
+ 		     "cpu MHz\t\t: %lu.%02lu\n"
+		     "bogomips\t: %lu.%02lu\n",
+		     XCHAL_BUILD_UNIQUE_ID,
+		     XCHAL_HAVE_BE ?  "big" : "little",
+		     CCOUNT_PER_JIFFY/(1000000/HZ),
+		     (CCOUNT_PER_JIFFY/(10000/HZ)) % 100,
+		     loops_per_jiffy/(500000/HZ),
+		     (loops_per_jiffy/(5000/HZ)) % 100);
+
+	seq_printf(f,"flags\t\t: "
+#if XCHAL_HAVE_NMI
+		     "nmi "
+#endif
+#if XCHAL_HAVE_DEBUG
+		     "debug "
+# if XCHAL_HAVE_OCD
+		     "ocd "
+# endif
+#endif
+#if XCHAL_HAVE_DENSITY
+	    	     "density "
+#endif
+#if XCHAL_HAVE_BOOLEANS
+		     "boolean "
+#endif
+#if XCHAL_HAVE_LOOPS
+		     "loop "
+#endif
+#if XCHAL_HAVE_NSA
+		     "nsa "
+#endif
+#if XCHAL_HAVE_MINMAX
+		     "minmax "
+#endif
+#if XCHAL_HAVE_SEXT
+		     "sext "
+#endif
+#if XCHAL_HAVE_CLAMPS
+		     "clamps "
+#endif
+#if XCHAL_HAVE_MAC16
+		     "mac16 "
+#endif
+#if XCHAL_HAVE_MUL16
+		     "mul16 "
+#endif
+#if XCHAL_HAVE_MUL32
+		     "mul32 "
+#endif
+#if XCHAL_HAVE_MUL32_HIGH
+		     "mul32h "
+#endif
+#if XCHAL_HAVE_FP
+		     "fpu "
+#endif
+		     "\n");
+
+	/* Registers. */
+	seq_printf(f,"physical aregs\t: %d\n"
+		     "misc regs\t: %d\n"
+		     "ibreak\t\t: %d\n"
+		     "dbreak\t\t: %d\n",
+		     XCHAL_NUM_AREGS,
+		     XCHAL_NUM_MISC_REGS,
+		     XCHAL_NUM_IBREAK,
+		     XCHAL_NUM_DBREAK);
+
+
+	/* Interrupt. */
+	seq_printf(f,"num ints\t: %d\n"
+		     "ext ints\t: %d\n"
+		     "int levels\t: %d\n"
+		     "timers\t\t: %d\n"
+		     "debug level\t: %d\n",
+		     XCHAL_NUM_INTERRUPTS,
+		     XCHAL_NUM_EXTINTERRUPTS,
+		     XCHAL_NUM_INTLEVELS,
+		     XCHAL_NUM_TIMERS,
+		     XCHAL_DEBUGLEVEL);
+
+	/* Cache */
+	seq_printf(f,"icache line size: %d\n"
+		     "icache ways\t: %d\n"
+		     "icache size\t: %d\n"
+		     "icache flags\t: "
+#if XCHAL_ICACHE_LINE_LOCKABLE
+		     "lock"
+#endif
+		     "\n"
+		     "dcache line size: %d\n"
+		     "dcache ways\t: %d\n"
+		     "dcache size\t: %d\n"
+		     "dcache flags\t: "
+#if XCHAL_DCACHE_IS_WRITEBACK
+		     "writeback"
+#endif
+#if XCHAL_DCACHE_LINE_LOCKABLE
+		     "lock"
+#endif
+		     "\n",
+		     XCHAL_ICACHE_LINESIZE,
+		     XCHAL_ICACHE_WAYS,
+		     XCHAL_ICACHE_SIZE,
+		     XCHAL_DCACHE_LINESIZE,
+		     XCHAL_DCACHE_WAYS,
+		     XCHAL_DCACHE_SIZE);
+
+	return 0;
+}
+
+/*
+ * We show only CPU #0 info.
+ */
+static void *
+c_start(struct seq_file *f, loff_t *pos)
+{
+	return (void *) ((*pos == 0) ? (void *)1 : NULL);
+}
+
+static void *
+c_next(struct seq_file *f, void *v, loff_t *pos)
+{
+	return NULL;
+}
+
+static void
+c_stop(struct seq_file *f, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op =
+{
+	start:  c_start,
+	next:   c_next,
+	stop:   c_stop,
+	show:   c_show
+};
+
+#endif /* CONFIG_PROC_FS */
+
diff --git a/arch/xtensa/kernel/signal.c b/arch/xtensa/kernel/signal.c
new file mode 100644
index 00000000..f2220b5b
--- /dev/null
+++ b/arch/xtensa/kernel/signal.c
@@ -0,0 +1,577 @@
+/*
+ * arch/xtensa/kernel/signal.c
+ *
+ * Default platform functions.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005, 2006 Tensilica Inc.
+ * Copyright (C) 1991, 1992  Linus Torvalds
+ * 1997-11-28  Modified for POSIX.1b signals by Richard Henderson
+ *
+ * Chris Zankel <chris@zankel.net>
+ * Joe Taylor <joe@tensilica.com>
+ */
+
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/personality.h>
+#include <linux/freezer.h>
+
+#include <asm/ucontext.h>
+#include <asm/uaccess.h>
+#include <asm/cacheflush.h>
+#include <asm/coprocessor.h>
+#include <asm/unistd.h>
+
+#define DEBUG_SIG  0
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset);
+
+extern struct task_struct *coproc_owners[];
+
+struct rt_sigframe
+{
+	struct siginfo info;
+	struct ucontext uc;
+	struct {
+		xtregs_opt_t opt;
+		xtregs_user_t user;
+#if XTENSA_HAVE_COPROCESSORS
+		xtregs_coprocessor_t cp;
+#endif
+	} xtregs;
+	unsigned char retcode[6];
+	unsigned int window[4];
+};
+
+/* 
+ * Flush register windows stored in pt_regs to stack.
+ * Returns 1 for errors.
+ */
+
+int
+flush_window_regs_user(struct pt_regs *regs)
+{
+	const unsigned long ws = regs->windowstart;
+	const unsigned long wb = regs->windowbase;
+	unsigned long sp = 0;
+	unsigned long wm;
+	int err = 1;
+	int base;
+
+	/* Return if no other frames. */
+
+	if (regs->wmask == 1)
+		return 0;
+
+	/* Rotate windowmask and skip empty frames. */
+
+	wm = (ws >> wb) | (ws << (XCHAL_NUM_AREGS / 4 - wb));
+	base = (XCHAL_NUM_AREGS / 4) - (regs->wmask >> 4);
+		
+	/* For call8 or call12 frames, we need the previous stack pointer. */
+
+	if ((regs->wmask & 2) == 0)
+		if (__get_user(sp, (int*)(regs->areg[base * 4 + 1] - 12)))
+			goto errout;
+
+	/* Spill frames to stack. */
+
+	while (base < XCHAL_NUM_AREGS / 4) {
+
+		int m = (wm >> base);
+		int inc = 0;
+
+		/* Save registers a4..a7 (call8) or a4...a11 (call12) */
+
+		if (m & 2) {			/* call4 */
+			inc = 1;
+
+		} else if (m & 4) {		/* call8 */
+			if (copy_to_user((void*)(sp - 32),
+					   &regs->areg[(base + 1) * 4], 16))
+				goto errout;
+			inc = 2;
+
+		} else if (m & 8) {	/* call12 */
+			if (copy_to_user((void*)(sp - 48),
+					   &regs->areg[(base + 1) * 4], 32))
+				goto errout;
+			inc = 3;
+		}
+
+		/* Save current frame a0..a3 under next SP */
+
+		sp = regs->areg[((base + inc) * 4 + 1) % XCHAL_NUM_AREGS];
+		if (copy_to_user((void*)(sp - 16), &regs->areg[base * 4], 16))
+			goto errout;
+
+		/* Get current stack pointer for next loop iteration. */
+
+		sp = regs->areg[base * 4 + 1];
+		base += inc;
+	}
+
+	regs->wmask = 1;
+	regs->windowstart = 1 << wb;
+
+	return 0;
+
+errout:
+	return err;
+}
+
+/*
+ * Note: We don't copy double exception 'regs', we have to finish double exc. 
+ * first before we return to signal handler! This dbl.exc.handler might cause 
+ * another double exception, but I think we are fine as the situation is the 
+ * same as if we had returned to the signal handerl and got an interrupt 
+ * immediately...
+ */
+
+static int
+setup_sigcontext(struct rt_sigframe __user *frame, struct pt_regs *regs)
+{
+	struct sigcontext __user *sc = &frame->uc.uc_mcontext;
+	struct thread_info *ti = current_thread_info();
+	int err = 0;
+
+#define COPY(x)	err |= __put_user(regs->x, &sc->sc_##x)
+	COPY(pc);
+	COPY(ps);
+	COPY(lbeg);
+	COPY(lend);
+	COPY(lcount);
+	COPY(sar);
+#undef COPY
+
+	err |= flush_window_regs_user(regs);
+	err |= __copy_to_user (sc->sc_a, regs->areg, 16 * 4);
+	err |= __put_user(0, &sc->sc_xtregs);
+
+	if (err)
+		return err;
+
+#if XTENSA_HAVE_COPROCESSORS
+	coprocessor_flush_all(ti);
+	coprocessor_release_all(ti);
+	err |= __copy_to_user(&frame->xtregs.cp, &ti->xtregs_cp,
+			      sizeof (frame->xtregs.cp));
+#endif
+	err |= __copy_to_user(&frame->xtregs.opt, &regs->xtregs_opt,
+			      sizeof (xtregs_opt_t));
+	err |= __copy_to_user(&frame->xtregs.user, &ti->xtregs_user,
+			      sizeof (xtregs_user_t));
+
+	err |= __put_user(err ? NULL : &frame->xtregs, &sc->sc_xtregs);
+
+	return err;
+}
+
+static int
+restore_sigcontext(struct pt_regs *regs, struct rt_sigframe __user *frame)
+{
+	struct sigcontext __user *sc = &frame->uc.uc_mcontext;
+	struct thread_info *ti = current_thread_info();
+	unsigned int err = 0;
+	unsigned long ps;
+
+#define COPY(x)	err |= __get_user(regs->x, &sc->sc_##x)
+	COPY(pc);
+	COPY(lbeg);
+	COPY(lend);
+	COPY(lcount);
+	COPY(sar);
+#undef COPY
+
+	/* All registers were flushed to stack. Start with a prestine frame. */
+
+	regs->wmask = 1;
+	regs->windowbase = 0;
+	regs->windowstart = 1;
+
+	regs->syscall = -1;		/* disable syscall checks */
+
+	/* For PS, restore only PS.CALLINC.
+	 * Assume that all other bits are either the same as for the signal
+	 * handler, or the user mode value doesn't matter (e.g. PS.OWB).
+	 */
+	err |= __get_user(ps, &sc->sc_ps);
+	regs->ps = (regs->ps & ~PS_CALLINC_MASK) | (ps & PS_CALLINC_MASK);
+
+	/* Additional corruption checks */
+
+	if ((regs->lcount > 0)
+	    && ((regs->lbeg > TASK_SIZE) || (regs->lend > TASK_SIZE)) )
+		err = 1;
+
+	err |= __copy_from_user(regs->areg, sc->sc_a, 16 * 4);
+
+	if (err)
+		return err;
+
+ 	/* The signal handler may have used coprocessors in which
+	 * case they are still enabled.  We disable them to force a
+	 * reloading of the original task's CP state by the lazy
+	 * context-switching mechanisms of CP exception handling.
+	 * Also, we essentially discard any coprocessor state that the
+	 * signal handler created. */
+
+#if XTENSA_HAVE_COPROCESSORS
+	coprocessor_release_all(ti);
+	err |= __copy_from_user(&ti->xtregs_cp, &frame->xtregs.cp,
+				sizeof (frame->xtregs.cp));
+#endif
+	err |= __copy_from_user(&ti->xtregs_user, &frame->xtregs.user,
+				sizeof (xtregs_user_t));
+	err |= __copy_from_user(&regs->xtregs_opt, &frame->xtregs.opt,
+				sizeof (xtregs_opt_t));
+
+	return err;
+}
+
+
+/*
+ * Do a signal return; undo the signal stack.
+ */
+
+asmlinkage long xtensa_rt_sigreturn(long a0, long a1, long a2, long a3,
+				    long a4, long a5, struct pt_regs *regs)
+{
+	struct rt_sigframe __user *frame;
+	sigset_t set;
+	int ret;
+
+	if (regs->depc > 64)
+		panic("rt_sigreturn in double exception!\n");
+
+	frame = (struct rt_sigframe __user *) regs->areg[1];
+
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+
+	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+		goto badframe;
+
+	sigdelsetmask(&set, ~_BLOCKABLE);
+	spin_lock_irq(&current->sighand->siglock);
+	current->blocked = set;
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	if (restore_sigcontext(regs, frame))
+		goto badframe;
+
+	ret = regs->areg[2];
+
+	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->areg[1]) == -EFAULT)
+		goto badframe;
+
+	return ret;
+
+badframe:
+	force_sig(SIGSEGV, current);
+	return 0;
+}
+
+
+
+/*
+ * Set up a signal frame.
+ */
+
+static int
+gen_return_code(unsigned char *codemem)
+{
+	int err = 0;
+
+	/*
+	 * The 12-bit immediate is really split up within the 24-bit MOVI
+	 * instruction.  As long as the above system call numbers fit within
+	 * 8-bits, the following code works fine. See the Xtensa ISA for
+	 * details.
+	 */
+
+#if __NR_rt_sigreturn > 255
+# error Generating the MOVI instruction below breaks!
+#endif
+
+#ifdef __XTENSA_EB__   /* Big Endian version */
+	/* Generate instruction:  MOVI a2, __NR_rt_sigreturn */
+	err |= __put_user(0x22, &codemem[0]);
+	err |= __put_user(0x0a, &codemem[1]);
+	err |= __put_user(__NR_rt_sigreturn, &codemem[2]);
+	/* Generate instruction:  SYSCALL */
+	err |= __put_user(0x00, &codemem[3]);
+	err |= __put_user(0x05, &codemem[4]);
+	err |= __put_user(0x00, &codemem[5]);
+
+#elif defined __XTENSA_EL__   /* Little Endian version */
+	/* Generate instruction:  MOVI a2, __NR_rt_sigreturn */
+	err |= __put_user(0x22, &codemem[0]);
+	err |= __put_user(0xa0, &codemem[1]);
+	err |= __put_user(__NR_rt_sigreturn, &codemem[2]);
+	/* Generate instruction:  SYSCALL */
+	err |= __put_user(0x00, &codemem[3]);
+	err |= __put_user(0x50, &codemem[4]);
+	err |= __put_user(0x00, &codemem[5]);
+#else
+# error Must use compiler for Xtensa processors.
+#endif
+
+	/* Flush generated code out of the data cache */
+
+	if (err == 0) {
+		__invalidate_icache_range((unsigned long)codemem, 6UL);
+		__flush_invalidate_dcache_range((unsigned long)codemem, 6UL);
+	}
+
+	return err;
+}
+
+
+static void setup_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+			sigset_t *set, struct pt_regs *regs)
+{
+	struct rt_sigframe *frame;
+	int err = 0;
+	int signal;
+	unsigned long sp, ra;
+
+	sp = regs->areg[1];
+
+	if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! on_sig_stack(sp)) {
+		sp = current->sas_ss_sp + current->sas_ss_size;
+	}
+
+	frame = (void *)((sp - sizeof(*frame)) & -16ul);
+
+	if (regs->depc > 64)
+		panic ("Double exception sys_sigreturn\n");
+
+	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) {
+		goto give_sigsegv;
+	}
+
+	signal = current_thread_info()->exec_domain
+		&& current_thread_info()->exec_domain->signal_invmap
+		&& sig < 32
+		? current_thread_info()->exec_domain->signal_invmap[sig]
+		: sig;
+
+	if (ka->sa.sa_flags & SA_SIGINFO) {
+		err |= copy_siginfo_to_user(&frame->info, info);
+	}
+
+	/* Create the user context.  */
+
+	err |= __put_user(0, &frame->uc.uc_flags);
+	err |= __put_user(0, &frame->uc.uc_link);
+	err |= __put_user((void *)current->sas_ss_sp,
+			  &frame->uc.uc_stack.ss_sp);
+	err |= __put_user(sas_ss_flags(regs->areg[1]),
+			  &frame->uc.uc_stack.ss_flags);
+	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
+	err |= setup_sigcontext(frame, regs);
+	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
+	if (ka->sa.sa_flags & SA_RESTORER) {
+		ra = (unsigned long)ka->sa.sa_restorer;
+	} else {
+
+		/* Create sys_rt_sigreturn syscall in stack frame */
+
+		err |= gen_return_code(frame->retcode);
+
+		if (err) {
+			goto give_sigsegv;
+		}
+		ra = (unsigned long) frame->retcode;
+	}
+
+	/* 
+	 * Create signal handler execution context.
+	 * Return context not modified until this point.
+	 */
+
+	/* Set up registers for signal handler */
+	start_thread(regs, (unsigned long) ka->sa.sa_handler, 
+		     (unsigned long) frame);
+
+	/* Set up a stack frame for a call4
+	 * Note: PS.CALLINC is set to one by start_thread
+	 */
+	regs->areg[4] = (((unsigned long) ra) & 0x3fffffff) | 0x40000000;
+	regs->areg[6] = (unsigned long) signal;
+	regs->areg[7] = (unsigned long) &frame->info;
+	regs->areg[8] = (unsigned long) &frame->uc;
+
+	/* Set access mode to USER_DS.  Nomenclature is outdated, but
+	 * functionality is used in uaccess.h
+	 */
+	set_fs(USER_DS);
+
+#if DEBUG_SIG
+	printk("SIG rt deliver (%s:%d): signal=%d sp=%p pc=%08x\n",
+		current->comm, current->pid, signal, frame, regs->pc);
+#endif
+
+	return;
+
+give_sigsegv:
+	if (sig == SIGSEGV)
+		ka->sa.sa_handler = SIG_DFL;
+	force_sig(SIGSEGV, current);
+}
+
+/*
+ * Atomically swap in the new signal mask, and wait for a signal.
+ */
+
+asmlinkage long xtensa_rt_sigsuspend(sigset_t __user *unewset, 
+    				     size_t sigsetsize,
+    				     long a2, long a3, long a4, long a5, 
+				     struct pt_regs *regs)
+{
+	sigset_t saveset, newset;
+
+	/* XXX: Don't preclude handling different sized sigset_t's.  */
+	if (sigsetsize != sizeof(sigset_t))
+		return -EINVAL;
+
+	if (copy_from_user(&newset, unewset, sizeof(newset)))
+		return -EFAULT;
+
+	sigdelsetmask(&newset, ~_BLOCKABLE);
+	spin_lock_irq(&current->sighand->siglock);
+	saveset = current->blocked;
+	current->blocked = newset;
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	regs->areg[2] = -EINTR;
+	while (1) {
+		current->state = TASK_INTERRUPTIBLE;
+		schedule();
+		if (do_signal(regs, &saveset))
+			return -EINTR;
+	}
+}
+
+asmlinkage long xtensa_sigaltstack(const stack_t __user *uss, 
+				   stack_t __user *uoss,
+    				   long a2, long a3, long a4, long a5,
+				   struct pt_regs *regs)
+{
+	return do_sigaltstack(uss, uoss, regs->areg[1]);
+}
+
+
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ *
+ * Note that we go through the signals twice: once to check the signals that
+ * the kernel can handle, and then we build all the user-level signal handling
+ * stack-frames in one go after that.
+ */
+int do_signal(struct pt_regs *regs, sigset_t *oldset)
+{
+	siginfo_t info;
+	int signr;
+	struct k_sigaction ka;
+
+	if (!user_mode(regs))
+		return 0;
+
+	if (try_to_freeze())
+		goto no_signal;
+
+	if (!oldset)
+		oldset = &current->blocked;
+
+	task_pt_regs(current)->icountlevel = 0;
+
+	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+
+	if (signr > 0) {
+
+		/* Are we from a system call? */
+
+		if ((signed)regs->syscall >= 0) {
+
+			/* If so, check system call restarting.. */
+
+			switch (regs->areg[2]) {
+				case -ERESTARTNOHAND:
+				case -ERESTART_RESTARTBLOCK:
+					regs->areg[2] = -EINTR;
+					break;
+
+				case -ERESTARTSYS:
+					if (!(ka.sa.sa_flags & SA_RESTART)) {
+						regs->areg[2] = -EINTR;
+						break;
+					}
+					/* fallthrough */
+				case -ERESTARTNOINTR:
+					regs->areg[2] = regs->syscall;
+					regs->pc -= 3;
+					break;
+
+				default:
+					/* nothing to do */
+					if (regs->areg[2] != 0)
+					break;
+			}
+		}
+
+		/* Whee!  Actually deliver the signal.  */
+		/* Set up the stack frame */
+		setup_frame(signr, &ka, &info, oldset, regs);
+
+		if (ka.sa.sa_flags & SA_ONESHOT)
+			ka.sa.sa_handler = SIG_DFL;
+
+		spin_lock_irq(&current->sighand->siglock);
+		sigorsets(&current->blocked, &current->blocked, &ka.sa.sa_mask);
+		if (!(ka.sa.sa_flags & SA_NODEFER))
+			sigaddset(&current->blocked, signr);
+		recalc_sigpending();
+		spin_unlock_irq(&current->sighand->siglock);
+		if (current->ptrace & PT_SINGLESTEP)
+			task_pt_regs(current)->icountlevel = 1;
+
+		return 1;
+	}
+
+no_signal:
+	/* Did we come from a system call? */
+	if ((signed) regs->syscall >= 0) {
+		/* Restart the system call - no handlers present */
+		switch (regs->areg[2]) {
+		case -ERESTARTNOHAND:
+		case -ERESTARTSYS:
+		case -ERESTARTNOINTR:
+			regs->areg[2] = regs->syscall;
+			regs->pc -= 3;
+			break;
+		case -ERESTART_RESTARTBLOCK:
+			regs->areg[2] = __NR_restart_syscall;
+			regs->pc -= 3;
+			break;
+		}
+	}
+	if (current->ptrace & PT_SINGLESTEP)
+		task_pt_regs(current)->icountlevel = 1;
+	return 0;
+}
+
diff --git a/arch/xtensa/kernel/syscall.c b/arch/xtensa/kernel/syscall.c
new file mode 100644
index 00000000..816e6d0d
--- /dev/null
+++ b/arch/xtensa/kernel/syscall.c
@@ -0,0 +1,57 @@
+/*
+ * arch/xtensa/kernel/syscall.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ * Copyright (C) 2000 Silicon Graphics, Inc.
+ * Copyright (C) 1995 - 2000 by Ralf Baechle
+ *
+ * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com>
+ * Marc Gauthier <marc@tensilica.com, marc@alumni.uwaterloo.ca>
+ * Chris Zankel <chris@zankel.net>
+ * Kevin Chea
+ *
+ */
+#include <asm/uaccess.h>
+#include <asm/syscall.h>
+#include <asm/unistd.h>
+#include <linux/linkage.h>
+#include <linux/stringify.h>
+#include <linux/errno.h>
+#include <linux/syscalls.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/mman.h>
+#include <linux/shm.h>
+
+typedef void (*syscall_t)(void);
+
+syscall_t sys_call_table[__NR_syscall_count] /* FIXME __cacheline_aligned */= {
+	[0 ... __NR_syscall_count - 1] = (syscall_t)&sys_ni_syscall,
+
+#undef __SYSCALL
+#define __SYSCALL(nr,symbol,nargs) [ nr ] = (syscall_t)symbol,
+#undef _XTENSA_UNISTD_H
+#undef  __KERNEL_SYSCALLS__
+#include <asm/unistd.h>
+};
+
+asmlinkage long xtensa_shmat(int shmid, char __user *shmaddr, int shmflg)
+{
+	unsigned long ret;
+	long err;
+
+	err = do_shmat(shmid, shmaddr, shmflg, &ret);
+	if (err)
+		return err;
+	return (long)ret;
+}
+
+asmlinkage long xtensa_fadvise64_64(int fd, int advice, unsigned long long offset, unsigned long long len)
+{
+	return sys_fadvise64_64(fd, offset, len, advice);
+}
+
diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
new file mode 100644
index 00000000..f3e5eb43
--- /dev/null
+++ b/arch/xtensa/kernel/time.c
@@ -0,0 +1,128 @@
+/*
+ * arch/xtensa/kernel/time.c
+ *
+ * Timer and clock support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Tensilica Inc.
+ *
+ * Chris Zankel <chris@zankel.net>
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/profile.h>
+#include <linux/delay.h>
+
+#include <asm/timex.h>
+#include <asm/platform.h>
+
+#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
+unsigned long ccount_per_jiffy;		/* per 1/HZ */
+unsigned long nsec_per_ccount;		/* nsec per ccount increment */
+#endif
+
+static cycle_t ccount_read(void)
+{
+	return (cycle_t)get_ccount();
+}
+
+static struct clocksource ccount_clocksource = {
+	.name = "ccount",
+	.rating = 200,
+	.read = ccount_read,
+	.mask = CLOCKSOURCE_MASK(32),
+	/*
+	 * With a shift of 22 the lower limit of the cpu clock is
+	 * 1MHz, where NSEC_PER_CCOUNT is 1000 or a bit less than
+	 * 2^10: Since we have 32 bits and the multiplicator can
+	 * already take up as much as 10 bits, this leaves us with
+	 * remaining upper 22 bits.
+	 */
+	.shift = 22,
+};
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id);
+static struct irqaction timer_irqaction = {
+	.handler =	timer_interrupt,
+	.flags =	IRQF_DISABLED,
+	.name =		"timer",
+};
+
+void __init time_init(void)
+{
+#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
+	printk("Calibrating CPU frequency ");
+	platform_calibrate_ccount();
+	printk("%d.%02d MHz\n", (int)ccount_per_jiffy/(1000000/HZ),
+			(int)(ccount_per_jiffy/(10000/HZ))%100);
+#endif
+	ccount_clocksource.mult =
+		clocksource_hz2mult(CCOUNT_PER_JIFFY * HZ,
+				ccount_clocksource.shift);
+	clocksource_register(&ccount_clocksource);
+
+	/* Initialize the linux timer interrupt. */
+
+	setup_irq(LINUX_TIMER_INT, &timer_irqaction);
+	set_linux_timer(get_ccount() + CCOUNT_PER_JIFFY);
+}
+
+/*
+ * The timer interrupt is called HZ times per second.
+ */
+
+irqreturn_t timer_interrupt (int irq, void *dev_id)
+{
+
+	unsigned long next;
+
+	next = get_linux_timer();
+
+again:
+	while ((signed long)(get_ccount() - next) > 0) {
+
+		profile_tick(CPU_PROFILING);
+#ifndef CONFIG_SMP
+		update_process_times(user_mode(get_irq_regs()));
+#endif
+
+		xtime_update(1); /* Linux handler in kernel/time/timekeeping */
+
+		/* Note that writing CCOMPARE clears the interrupt. */
+
+		next += CCOUNT_PER_JIFFY;
+		set_linux_timer(next);
+	}
+
+	/* Allow platform to do something useful (Wdog). */
+
+	platform_heartbeat();
+
+	/* Make sure we didn't miss any tick... */
+
+	if ((signed long)(get_ccount() - next) > 0)
+		goto again;
+
+	return IRQ_HANDLED;
+}
+
+#ifndef CONFIG_GENERIC_CALIBRATE_DELAY
+void __cpuinit calibrate_delay(void)
+{
+	loops_per_jiffy = CCOUNT_PER_JIFFY;
+	printk("Calibrating delay loop (skipped)... "
+	       "%lu.%02lu BogoMIPS preset\n",
+	       loops_per_jiffy/(1000000/HZ),
+	       (loops_per_jiffy/(10000/HZ)) % 100);
+}
+#endif
diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c
new file mode 100644
index 00000000..e64efac3
--- /dev/null
+++ b/arch/xtensa/kernel/traps.c
@@ -0,0 +1,508 @@
+/*
+ * arch/xtensa/kernel/traps.c
+ *
+ * Exception handling.
+ *
+ * Derived from code with the following copyrights:
+ * Copyright (C) 1994 - 1999 by Ralf Baechle
+ * Modified for R3000 by Paul M. Antoine, 1995, 1996
+ * Complete output from die() by Ulf Carlsson, 1998
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ *
+ * Essentially rewritten for the Xtensa architecture port.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ *
+ * Joe Taylor	<joe@tensilica.com, joetylr@yahoo.com>
+ * Chris Zankel	<chris@zankel.net>
+ * Marc Gauthier<marc@tensilica.com, marc@alumni.uwaterloo.ca>
+ * Kevin Chea
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/stringify.h>
+#include <linux/kallsyms.h>
+#include <linux/delay.h>
+#include <linux/hardirq.h>
+
+#include <asm/ptrace.h>
+#include <asm/timex.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+
+#ifdef CONFIG_KGDB
+extern int gdb_enter;
+extern int return_from_debug_flag;
+#endif
+
+/*
+ * Machine specific interrupt handlers
+ */
+
+extern void kernel_exception(void);
+extern void user_exception(void);
+
+extern void fast_syscall_kernel(void);
+extern void fast_syscall_user(void);
+extern void fast_alloca(void);
+extern void fast_unaligned(void);
+extern void fast_second_level_miss(void);
+extern void fast_store_prohibited(void);
+extern void fast_coprocessor(void);
+
+extern void do_illegal_instruction (struct pt_regs*);
+extern void do_interrupt (struct pt_regs*);
+extern void do_unaligned_user (struct pt_regs*);
+extern void do_multihit (struct pt_regs*, unsigned long);
+extern void do_page_fault (struct pt_regs*, unsigned long);
+extern void do_debug (struct pt_regs*);
+extern void system_call (struct pt_regs*);
+
+/*
+ * The vector table must be preceded by a save area (which
+ * implies it must be in RAM, unless one places RAM immediately
+ * before a ROM and puts the vector at the start of the ROM (!))
+ */
+
+#define KRNL		0x01
+#define USER		0x02
+
+#define COPROCESSOR(x)							\
+{ EXCCAUSE_COPROCESSOR ## x ## _DISABLED, USER, fast_coprocessor }
+
+typedef struct {
+	int cause;
+	int fast;
+	void* handler;
+} dispatch_init_table_t;
+
+static dispatch_init_table_t __initdata dispatch_init_table[] = {
+
+{ EXCCAUSE_ILLEGAL_INSTRUCTION,	0,	   do_illegal_instruction},
+{ EXCCAUSE_SYSTEM_CALL,		KRNL,	   fast_syscall_kernel },
+{ EXCCAUSE_SYSTEM_CALL,		USER,	   fast_syscall_user },
+{ EXCCAUSE_SYSTEM_CALL,		0,	   system_call },
+/* EXCCAUSE_INSTRUCTION_FETCH unhandled */
+/* EXCCAUSE_LOAD_STORE_ERROR unhandled*/
+{ EXCCAUSE_LEVEL1_INTERRUPT,	0,	   do_interrupt },
+{ EXCCAUSE_ALLOCA,		USER|KRNL, fast_alloca },
+/* EXCCAUSE_INTEGER_DIVIDE_BY_ZERO unhandled */
+/* EXCCAUSE_PRIVILEGED unhandled */
+#if XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION
+#ifdef CONFIG_UNALIGNED_USER
+{ EXCCAUSE_UNALIGNED,		USER,	   fast_unaligned },
+#else
+{ EXCCAUSE_UNALIGNED,		0,	   do_unaligned_user },
+#endif
+{ EXCCAUSE_UNALIGNED,		KRNL,	   fast_unaligned },
+#endif
+#ifdef CONFIG_MMU
+{ EXCCAUSE_ITLB_MISS,		0,	   do_page_fault },
+{ EXCCAUSE_ITLB_MISS,		USER|KRNL, fast_second_level_miss},
+{ EXCCAUSE_ITLB_MULTIHIT,		0,	   do_multihit },
+{ EXCCAUSE_ITLB_PRIVILEGE,	0,	   do_page_fault },
+/* EXCCAUSE_SIZE_RESTRICTION unhandled */
+{ EXCCAUSE_FETCH_CACHE_ATTRIBUTE,	0,	   do_page_fault },
+{ EXCCAUSE_DTLB_MISS,		USER|KRNL, fast_second_level_miss},
+{ EXCCAUSE_DTLB_MISS,		0,	   do_page_fault },
+{ EXCCAUSE_DTLB_MULTIHIT,		0,	   do_multihit },
+{ EXCCAUSE_DTLB_PRIVILEGE,	0,	   do_page_fault },
+/* EXCCAUSE_DTLB_SIZE_RESTRICTION unhandled */
+{ EXCCAUSE_STORE_CACHE_ATTRIBUTE,	USER|KRNL, fast_store_prohibited },
+{ EXCCAUSE_STORE_CACHE_ATTRIBUTE,	0,	   do_page_fault },
+{ EXCCAUSE_LOAD_CACHE_ATTRIBUTE,	0,	   do_page_fault },
+#endif /* CONFIG_MMU */
+/* XCCHAL_EXCCAUSE_FLOATING_POINT unhandled */
+#if XTENSA_HAVE_COPROCESSOR(0)
+COPROCESSOR(0),
+#endif
+#if XTENSA_HAVE_COPROCESSOR(1)
+COPROCESSOR(1),
+#endif
+#if XTENSA_HAVE_COPROCESSOR(2)
+COPROCESSOR(2),
+#endif
+#if XTENSA_HAVE_COPROCESSOR(3)
+COPROCESSOR(3),
+#endif
+#if XTENSA_HAVE_COPROCESSOR(4)
+COPROCESSOR(4),
+#endif
+#if XTENSA_HAVE_COPROCESSOR(5)
+COPROCESSOR(5),
+#endif
+#if XTENSA_HAVE_COPROCESSOR(6)
+COPROCESSOR(6),
+#endif
+#if XTENSA_HAVE_COPROCESSOR(7)
+COPROCESSOR(7),
+#endif
+{ EXCCAUSE_MAPPED_DEBUG,		0,		do_debug },
+{ -1, -1, 0 }
+
+};
+
+/* The exception table <exc_table> serves two functions:
+ * 1. it contains three dispatch tables (fast_user, fast_kernel, default-c)
+ * 2. it is a temporary memory buffer for the exception handlers.
+ */
+
+unsigned long exc_table[EXC_TABLE_SIZE/4];
+
+void die(const char*, struct pt_regs*, long);
+
+static inline void
+__die_if_kernel(const char *str, struct pt_regs *regs, long err)
+{
+	if (!user_mode(regs))
+		die(str, regs, err);
+}
+
+/*
+ * Unhandled Exceptions. Kill user task or panic if in kernel space.
+ */
+
+void do_unhandled(struct pt_regs *regs, unsigned long exccause)
+{
+	__die_if_kernel("Caught unhandled exception - should not happen",
+	    		regs, SIGKILL);
+
+	/* If in user mode, send SIGILL signal to current process */
+	printk("Caught unhandled exception in '%s' "
+	       "(pid = %d, pc = %#010lx) - should not happen\n"
+	       "\tEXCCAUSE is %ld\n",
+	       current->comm, task_pid_nr(current), regs->pc, exccause);
+	force_sig(SIGILL, current);
+}
+
+/*
+ * Multi-hit exception. This if fatal!
+ */
+
+void do_multihit(struct pt_regs *regs, unsigned long exccause)
+{
+	die("Caught multihit exception", regs, SIGKILL);
+}
+
+/*
+ * Level-1 interrupt.
+ * We currently have no priority encoding.
+ */
+
+unsigned long ignored_level1_interrupts;
+extern void do_IRQ(int, struct pt_regs *);
+
+void do_interrupt (struct pt_regs *regs)
+{
+	unsigned long intread = get_sr (INTREAD);
+	unsigned long intenable = get_sr (INTENABLE);
+	int i, mask;
+
+	/* Handle all interrupts (no priorities).
+	 * (Clear the interrupt before processing, in case it's
+	 *  edge-triggered or software-generated)
+	 */
+
+	for (i=0, mask = 1; i < XCHAL_NUM_INTERRUPTS; i++, mask <<= 1) {
+		if (mask & (intread & intenable)) {
+			set_sr (mask, INTCLEAR);
+			do_IRQ (i,regs);
+		}
+	}
+}
+
+/*
+ * Illegal instruction. Fatal if in kernel space.
+ */
+
+void
+do_illegal_instruction(struct pt_regs *regs)
+{
+	__die_if_kernel("Illegal instruction in kernel", regs, SIGKILL);
+
+	/* If in user mode, send SIGILL signal to current process. */
+
+	printk("Illegal Instruction in '%s' (pid = %d, pc = %#010lx)\n",
+	    current->comm, task_pid_nr(current), regs->pc);
+	force_sig(SIGILL, current);
+}
+
+
+/*
+ * Handle unaligned memory accesses from user space. Kill task.
+ *
+ * If CONFIG_UNALIGNED_USER is not set, we don't allow unaligned memory
+ * accesses causes from user space.
+ */
+
+#if XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION
+#ifndef CONFIG_UNALIGNED_USER
+void
+do_unaligned_user (struct pt_regs *regs)
+{
+	siginfo_t info;
+
+	__die_if_kernel("Unhandled unaligned exception in kernel",
+	    		regs, SIGKILL);
+
+	current->thread.bad_vaddr = regs->excvaddr;
+	current->thread.error_code = -3;
+	printk("Unaligned memory access to %08lx in '%s' "
+	       "(pid = %d, pc = %#010lx)\n",
+	       regs->excvaddr, current->comm, task_pid_nr(current), regs->pc);
+	info.si_signo = SIGBUS;
+	info.si_errno = 0;
+	info.si_code = BUS_ADRALN;
+	info.si_addr = (void *) regs->excvaddr;
+	force_sig_info(SIGSEGV, &info, current);
+
+}
+#endif
+#endif
+
+void
+do_debug(struct pt_regs *regs)
+{
+#ifdef CONFIG_KGDB
+	/* If remote debugging is configured AND enabled, we give control to
+	 * kgdb.  Otherwise, we fall through, perhaps giving control to the
+	 * native debugger.
+	 */
+
+	if (gdb_enter) {
+		extern void gdb_handle_exception(struct pt_regs *);
+		gdb_handle_exception(regs);
+		return_from_debug_flag = 1;
+		return;
+	}
+#endif
+
+	__die_if_kernel("Breakpoint in kernel", regs, SIGKILL);
+
+	/* If in user mode, send SIGTRAP signal to current process */
+
+	force_sig(SIGTRAP, current);
+}
+
+
+/*
+ * Initialize dispatch tables.
+ *
+ * The exception vectors are stored compressed the __init section in the
+ * dispatch_init_table. This function initializes the following three tables
+ * from that compressed table:
+ * - fast user		first dispatch table for user exceptions
+ * - fast kernel	first dispatch table for kernel exceptions
+ * - default C-handler	C-handler called by the default fast handler.
+ *
+ * See vectors.S for more details.
+ */
+
+#define set_handler(idx,handler) (exc_table[idx] = (unsigned long) (handler))
+
+void __init trap_init(void)
+{
+	int i;
+
+	/* Setup default vectors. */
+
+	for(i = 0; i < 64; i++) {
+		set_handler(EXC_TABLE_FAST_USER/4   + i, user_exception);
+		set_handler(EXC_TABLE_FAST_KERNEL/4 + i, kernel_exception);
+		set_handler(EXC_TABLE_DEFAULT/4 + i, do_unhandled);
+	}
+
+	/* Setup specific handlers. */
+
+	for(i = 0; dispatch_init_table[i].cause >= 0; i++) {
+
+		int fast = dispatch_init_table[i].fast;
+		int cause = dispatch_init_table[i].cause;
+		void *handler = dispatch_init_table[i].handler;
+
+		if (fast == 0)
+			set_handler (EXC_TABLE_DEFAULT/4 + cause, handler);
+		if (fast && fast & USER)
+			set_handler (EXC_TABLE_FAST_USER/4 + cause, handler);
+		if (fast && fast & KRNL)
+			set_handler (EXC_TABLE_FAST_KERNEL/4 + cause, handler);
+	}
+
+	/* Initialize EXCSAVE_1 to hold the address of the exception table. */
+
+	i = (unsigned long)exc_table;
+	__asm__ __volatile__("wsr  %0, "__stringify(EXCSAVE_1)"\n" : : "a" (i));
+}
+
+/*
+ * This function dumps the current valid window frame and other base registers.
+ */
+
+void show_regs(struct pt_regs * regs)
+{
+	int i, wmask;
+
+	wmask = regs->wmask & ~1;
+
+	for (i = 0; i < 16; i++) {
+		if ((i % 8) == 0)
+			printk(KERN_INFO "a%02d:", i);
+		printk(KERN_CONT " %08lx", regs->areg[i]);
+	}
+	printk(KERN_CONT "\n");
+
+	printk("pc: %08lx, ps: %08lx, depc: %08lx, excvaddr: %08lx\n",
+	       regs->pc, regs->ps, regs->depc, regs->excvaddr);
+	printk("lbeg: %08lx, lend: %08lx lcount: %08lx, sar: %08lx\n",
+	       regs->lbeg, regs->lend, regs->lcount, regs->sar);
+	if (user_mode(regs))
+		printk("wb: %08lx, ws: %08lx, wmask: %08lx, syscall: %ld\n",
+		       regs->windowbase, regs->windowstart, regs->wmask,
+		       regs->syscall);
+}
+
+static __always_inline unsigned long *stack_pointer(struct task_struct *task)
+{
+	unsigned long *sp;
+
+	if (!task || task == current)
+		__asm__ __volatile__ ("mov %0, a1\n" : "=a"(sp));
+	else
+		sp = (unsigned long *)task->thread.sp;
+
+	return sp;
+}
+
+void show_trace(struct task_struct *task, unsigned long *sp)
+{
+	unsigned long a0, a1, pc;
+	unsigned long sp_start, sp_end;
+
+	if (sp)
+		a1 = (unsigned long)sp;
+	else
+		a1 = (unsigned long)stack_pointer(task);
+
+	sp_start = a1 & ~(THREAD_SIZE-1);
+	sp_end = sp_start + THREAD_SIZE;
+
+	printk("Call Trace:");
+#ifdef CONFIG_KALLSYMS
+	printk("\n");
+#endif
+	spill_registers();
+
+	while (a1 > sp_start && a1 < sp_end) {
+		sp = (unsigned long*)a1;
+
+		a0 = *(sp - 4);
+		a1 = *(sp - 3);
+
+		if (a1 <= (unsigned long) sp)
+			break;
+
+		pc = MAKE_PC_FROM_RA(a0, a1);
+
+		if (kernel_text_address(pc)) {
+			printk(" [<%08lx>] ", pc);
+			print_symbol("%s\n", pc);
+		}
+	}
+	printk("\n");
+}
+
+/*
+ * This routine abuses get_user()/put_user() to reference pointers
+ * with at least a bit of error checking ...
+ */
+
+static int kstack_depth_to_print = 24;
+
+void show_stack(struct task_struct *task, unsigned long *sp)
+{
+	int i = 0;
+	unsigned long *stack;
+
+	if (!sp)
+		sp = stack_pointer(task);
+ 	stack = sp;
+
+	printk("\nStack: ");
+
+	for (i = 0; i < kstack_depth_to_print; i++) {
+		if (kstack_end(sp))
+			break;
+		if (i && ((i % 8) == 0))
+			printk("\n       ");
+		printk("%08lx ", *sp++);
+	}
+	printk("\n");
+	show_trace(task, stack);
+}
+
+void dump_stack(void)
+{
+	show_stack(current, NULL);
+}
+
+EXPORT_SYMBOL(dump_stack);
+
+
+void show_code(unsigned int *pc)
+{
+	long i;
+
+	printk("\nCode:");
+
+	for(i = -3 ; i < 6 ; i++) {
+		unsigned long insn;
+		if (__get_user(insn, pc + i)) {
+			printk(" (Bad address in pc)\n");
+			break;
+		}
+		printk("%c%08lx%c",(i?' ':'<'),insn,(i?' ':'>'));
+	}
+}
+
+DEFINE_SPINLOCK(die_lock);
+
+void die(const char * str, struct pt_regs * regs, long err)
+{
+	static int die_counter;
+	int nl = 0;
+
+	console_verbose();
+	spin_lock_irq(&die_lock);
+
+	printk("%s: sig: %ld [#%d]\n", str, err, ++die_counter);
+#ifdef CONFIG_PREEMPT
+	printk("PREEMPT ");
+	nl = 1;
+#endif
+	if (nl)
+		printk("\n");
+	show_regs(regs);
+	if (!user_mode(regs))
+		show_stack(NULL, (unsigned long*)regs->areg[1]);
+
+	add_taint(TAINT_DIE);
+	spin_unlock_irq(&die_lock);
+
+	if (in_interrupt())
+		panic("Fatal exception in interrupt");
+
+	if (panic_on_oops)
+		panic("Fatal exception");
+
+	do_exit(err);
+}
+
+
diff --git a/arch/xtensa/kernel/vectors.S b/arch/xtensa/kernel/vectors.S
new file mode 100644
index 00000000..70066e35
--- /dev/null
+++ b/arch/xtensa/kernel/vectors.S
@@ -0,0 +1,468 @@
+/*
+ * arch/xtensa/kernel/vectors.S
+ *
+ * This file contains all exception vectors (user, kernel, and double),
+ * as well as the window vectors (overflow and underflow), and the debug
+ * vector. These are the primary vectors executed by the processor if an
+ * exception occurs.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of
+ * this archive for more details.
+ *
+ * Copyright (C) 2005 Tensilica, Inc.
+ *
+ * Chris Zankel <chris@zankel.net>
+ *
+ */
+
+/*
+ * We use a two-level table approach. The user and kernel exception vectors
+ * use a first-level dispatch table to dispatch the exception to a registered
+ * fast handler or the default handler, if no fast handler was registered.
+ * The default handler sets up a C-stack and dispatches the exception to a
+ * registerd C handler in the second-level dispatch table.
+ *
+ * Fast handler entry condition:
+ *
+ *   a0:	trashed, original value saved on stack (PT_AREG0)
+ *   a1:	a1
+ *   a2:	new stack pointer, original value in depc
+ *   a3:	dispatch table
+ *   depc:	a2, original value saved on stack (PT_DEPC)
+ *   excsave_1:	a3
+ *
+ * The value for PT_DEPC saved to stack also functions as a boolean to
+ * indicate that the exception is either a double or a regular exception:
+ *
+ *   PT_DEPC	>= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception
+ *		<  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
+ *
+ * Note:  Neither the kernel nor the user exception handler generate literals.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/ptrace.h>
+#include <asm/current.h>
+#include <asm/asm-offsets.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/thread_info.h>
+
+#define WINDOW_VECTORS_SIZE   0x180
+
+
+/*
+ * User exception vector. (Exceptions with PS.UM == 1, PS.EXCM == 0)
+ *
+ * We get here when an exception occurred while we were in userland.
+ * We switch to the kernel stack and jump to the first level handler
+ * associated to the exception cause.
+ *
+ * Note: the saved kernel stack pointer (EXC_TABLE_KSTK) is already
+ *       decremented by PT_USER_SIZE.
+ */
+
+	.section .UserExceptionVector.text, "ax"
+
+ENTRY(_UserExceptionVector)
+
+	xsr	a3, EXCSAVE_1		# save a3 and get dispatch table
+	wsr	a2, DEPC		# save a2
+	l32i	a2, a3, EXC_TABLE_KSTK	# load kernel stack to a2
+	s32i	a0, a2, PT_AREG0	# save a0 to ESF
+	rsr	a0, EXCCAUSE		# retrieve exception cause
+	s32i	a0, a2, PT_DEPC		# mark it as a regular exception
+	addx4	a0, a0, a3		# find entry in table
+	l32i	a0, a0, EXC_TABLE_FAST_USER	# load handler
+	jx	a0
+
+/*
+ * Kernel exception vector. (Exceptions with PS.UM == 0, PS.EXCM == 0)
+ *
+ * We get this exception when we were already in kernel space.
+ * We decrement the current stack pointer (kernel) by PT_SIZE and
+ * jump to the first-level handler associated with the exception cause.
+ *
+ * Note: we need to preserve space for the spill region.
+ */
+
+	.section .KernelExceptionVector.text, "ax"
+
+ENTRY(_KernelExceptionVector)
+
+	xsr	a3, EXCSAVE_1		# save a3, and get dispatch table
+	wsr	a2, DEPC		# save a2
+	addi	a2, a1, -16-PT_SIZE	# adjust stack pointer
+	s32i	a0, a2, PT_AREG0	# save a0 to ESF
+	rsr	a0, EXCCAUSE		# retrieve exception cause
+	s32i	a0, a2, PT_DEPC		# mark it as a regular exception
+	addx4	a0, a0, a3		# find entry in table
+	l32i	a0, a0, EXC_TABLE_FAST_KERNEL	# load handler address
+	jx	a0
+
+
+/*
+ * Double exception vector (Exceptions with PS.EXCM == 1)
+ * We get this exception when another exception occurs while were are
+ * already in an exception, such as window overflow/underflow exception,
+ * or 'expected' exceptions, for example memory exception when we were trying
+ * to read data from an invalid address in user space.
+ *
+ * Note that this vector is never invoked for level-1 interrupts, because such
+ * interrupts are disabled (masked) when PS.EXCM is set.
+ *
+ * We decode the exception and take the appropriate action.  However, the
+ * double exception vector is much more careful, because a lot more error
+ * cases go through the double exception vector than through the user and
+ * kernel exception vectors.
+ *
+ * Occasionally, the kernel expects a double exception to occur.  This usually
+ * happens when accessing user-space memory with the user's permissions
+ * (l32e/s32e instructions).  The kernel state, though, is not always suitable
+ * for immediate transfer of control to handle_double, where "normal" exception
+ * processing occurs. Also in kernel mode, TLB misses can occur if accessing
+ * vmalloc memory, possibly requiring repair in a double exception handler.
+ *
+ * The variable at TABLE_FIXUP offset from the pointer in EXCSAVE_1 doubles as
+ * a boolean variable and a pointer to a fixup routine. If the variable
+ * EXC_TABLE_FIXUP is non-zero, this handler jumps to that address. A value of
+ * zero indicates to use the default kernel/user exception handler.
+ * There is only one exception, when the value is identical to the exc_table
+ * label, the kernel is in trouble. This mechanism is used to protect critical
+ * sections, mainly when the handler writes to the stack to assert the stack
+ * pointer is valid. Once the fixup/default handler leaves that area, the
+ * EXC_TABLE_FIXUP variable is reset to the fixup handler or zero.
+ *
+ * Procedures wishing to use this mechanism should set EXC_TABLE_FIXUP to the
+ * nonzero address of a fixup routine before it could cause a double exception
+ * and reset it before it returns.
+ *
+ * Some other things to take care of when a fast exception handler doesn't
+ * specify a particular fixup handler but wants to use the default handlers:
+ *
+ *  - The original stack pointer (in a1) must not be modified. The fast
+ *    exception handler should only use a2 as the stack pointer.
+ *
+ *  - If the fast handler manipulates the stack pointer (in a2), it has to
+ *    register a valid fixup handler and cannot use the default handlers.
+ *
+ *  - The handler can use any other generic register from a3 to a15, but it
+ *    must save the content of these registers to stack (PT_AREG3...PT_AREGx)
+ *
+ *  - These registers must be saved before a double exception can occur.
+ *
+ *  - If we ever implement handling signals while in double exceptions, the
+ *    number of registers a fast handler has saved (excluding a0 and a1) must
+ *    be written to  PT_AREG1. (1 if only a3 is used, 2 for a3 and a4, etc. )
+ *
+ * The fixup handlers are special handlers:
+ *
+ *  - Fixup entry conditions differ from regular exceptions:
+ *
+ *	a0:	   DEPC
+ *	a1: 	   a1
+ *	a2:	   trashed, original value in EXC_TABLE_DOUBLE_A2
+ *	a3:	   exctable
+ *	depc:	   a0
+ *	excsave_1: a3
+ *
+ *  - When the kernel enters the fixup handler, it still assumes it is in a
+ *    critical section, so EXC_TABLE_FIXUP variable is set to exc_table.
+ *    The fixup handler, therefore, has to re-register itself as the fixup
+ *    handler before it returns from the double exception.
+ *
+ *  - Fixup handler can share the same exception frame with the fast handler.
+ *    The kernel stack pointer is not changed when entering the fixup handler.
+ *
+ *  - Fixup handlers can jump to the default kernel and user exception
+ *    handlers. Before it jumps, though, it has to setup a exception frame
+ *    on stack. Because the default handler resets the register fixup handler
+ *    the fixup handler must make sure that the default handler returns to
+ *    it instead of the exception address, so it can re-register itself as
+ *    the fixup handler.
+ *
+ * In case of a critical condition where the kernel cannot recover, we jump
+ * to unrecoverable_exception with the following entry conditions.
+ * All registers a0...a15 are unchanged from the last exception, except:
+ *
+ *	a0:	   last address before we jumped to the unrecoverable_exception.
+ *	excsave_1: a0
+ *
+ *
+ * See the handle_alloca_user and spill_registers routines for example clients.
+ *
+ * FIXME: Note: we currently don't allow signal handling coming from a double
+ *        exception, so the item markt with (*) is not required.
+ */
+
+	.section .DoubleExceptionVector.text, "ax"
+	.begin literal_prefix .DoubleExceptionVector
+
+ENTRY(_DoubleExceptionVector)
+
+	/* Deliberately destroy excsave (don't assume it's value was valid). */
+
+	wsr	a3, EXCSAVE_1		# save a3
+
+	/* Check for kernel double exception (usually fatal). */
+
+	rsr	a3, PS
+	_bbci.l	a3, PS_UM_BIT, .Lksp
+
+	/* Check if we are currently handling a window exception. */
+	/* Note: We don't need to indicate that we enter a critical section. */
+
+	xsr	a0, DEPC		# get DEPC, save a0
+
+	movi	a3, XCHAL_WINDOW_VECTORS_VADDR
+	_bltu	a0, a3, .Lfixup
+	addi	a3, a3, WINDOW_VECTORS_SIZE
+	_bgeu	a0, a3, .Lfixup
+
+	/* Window overflow/underflow exception. Get stack pointer. */
+
+	mov	a3, a2
+	movi	a2, exc_table
+	l32i	a2, a2, EXC_TABLE_KSTK
+
+	/* Check for overflow/underflow exception, jump if overflow. */
+
+	_bbci.l	a0, 6, .Lovfl
+
+	/* a0: depc, a1: a1, a2: kstk, a3: a2, depc: a0, excsave: a3  */
+
+	/* Restart window underflow exception.
+	 * We return to the instruction in user space that caused the window
+	 * underflow exception. Therefore, we change window base to the value
+	 * before we entered the window underflow exception and prepare the
+	 * registers to return as if we were coming from a regular exception
+	 * by changing depc (in a0).
+	 * Note: We can trash the current window frame (a0...a3) and depc!
+	 */
+
+	wsr	a2, DEPC		# save stack pointer temporarily
+	rsr	a0, PS
+	extui	a0, a0, PS_OWB_SHIFT, 4
+	wsr	a0, WINDOWBASE
+	rsync
+
+	/* We are now in the previous window frame. Save registers again. */
+
+	xsr	a2, DEPC		# save a2 and get stack pointer
+	s32i	a0, a2, PT_AREG0
+
+	wsr	a3, EXCSAVE_1		# save a3
+	movi	a3, exc_table
+
+	rsr	a0, EXCCAUSE
+	s32i	a0, a2, PT_DEPC		# mark it as a regular exception
+	addx4	a0, a0, a3
+	l32i	a0, a0, EXC_TABLE_FAST_USER
+	jx	a0
+
+.Lfixup:/* Check for a fixup handler or if we were in a critical section. */
+
+	/* a0: depc, a1: a1, a2: a2, a3: trashed, depc: a0, excsave1: a3 */
+
+	movi	a3, exc_table
+	s32i	a2, a3, EXC_TABLE_DOUBLE_SAVE	# temporary variable
+
+	/* Enter critical section. */
+
+	l32i	a2, a3, EXC_TABLE_FIXUP
+	s32i	a3, a3, EXC_TABLE_FIXUP
+	beq	a2, a3, .Lunrecoverable_fixup	# critical!
+	beqz	a2, .Ldflt			# no handler was registered
+
+	/* a0: depc, a1: a1, a2: trash, a3: exctable, depc: a0, excsave: a3 */
+
+	jx	a2
+
+.Ldflt:	/* Get stack pointer. */
+
+	l32i	a3, a3, EXC_TABLE_DOUBLE_SAVE
+	addi	a2, a3, -PT_USER_SIZE
+
+.Lovfl:	/* Jump to default handlers. */
+
+	/* a0: depc, a1: a1, a2: kstk, a3: a2, depc: a0, excsave: a3 */
+
+	xsr	a3, DEPC
+	s32i	a0, a2, PT_DEPC
+	s32i	a3, a2, PT_AREG0
+
+	/* a0: avail, a1: a1, a2: kstk, a3: avail, depc: a2, excsave: a3 */
+
+	movi	a3, exc_table
+	rsr	a0, EXCCAUSE
+	addx4	a0, a0, a3
+	l32i	a0, a0, EXC_TABLE_FAST_USER
+	jx	a0
+
+	/*
+	 * We only allow the ITLB miss exception if we are in kernel space.
+	 * All other exceptions are unexpected and thus unrecoverable!
+	 */
+
+#ifdef CONFIG_MMU
+	.extern fast_second_level_miss_double_kernel
+
+.Lksp:	/* a0: a0, a1: a1, a2: a2, a3: trashed, depc: depc, excsave: a3 */
+
+	rsr	a3, EXCCAUSE
+	beqi	a3, EXCCAUSE_ITLB_MISS, 1f
+	addi	a3, a3, -EXCCAUSE_DTLB_MISS
+	bnez	a3, .Lunrecoverable
+1:	movi	a3, fast_second_level_miss_double_kernel
+	jx	a3
+#else
+.equ	.Lksp,	.Lunrecoverable
+#endif
+
+	/* Critical! We can't handle this situation. PANIC! */
+
+	.extern unrecoverable_exception
+
+.Lunrecoverable_fixup:
+	l32i	a2, a3, EXC_TABLE_DOUBLE_SAVE
+	xsr	a0, DEPC
+
+.Lunrecoverable:
+	rsr	a3, EXCSAVE_1
+	wsr	a0, EXCSAVE_1
+	movi	a0, unrecoverable_exception
+	callx0	a0
+
+	.end literal_prefix
+
+
+/*
+ * Debug interrupt vector
+ *
+ * There is not much space here, so simply jump to another handler.
+ * EXCSAVE[DEBUGLEVEL] has been set to that handler.
+ */
+
+	.section .DebugInterruptVector.text, "ax"
+
+ENTRY(_DebugInterruptVector)
+	xsr	a0, EXCSAVE + XCHAL_DEBUGLEVEL
+	jx	a0
+
+
+
+/* Window overflow and underflow handlers.
+ * The handlers must be 64 bytes apart, first starting with the underflow
+ * handlers underflow-4 to underflow-12, then the overflow handlers
+ * overflow-4 to overflow-12.
+ *
+ * Note: We rerun the underflow handlers if we hit an exception, so
+ *	 we try to access any page that would cause a page fault early.
+ */
+
+	.section		.WindowVectors.text, "ax"
+
+
+/* 4-Register Window Overflow Vector (Handler) */
+
+	.align 64
+.global _WindowOverflow4
+_WindowOverflow4:
+	s32e	a0, a5, -16
+	s32e	a1, a5, -12
+	s32e	a2, a5,  -8
+	s32e	a3, a5,  -4
+	rfwo
+
+
+/* 4-Register Window Underflow Vector (Handler) */
+
+	.align 64
+.global _WindowUnderflow4
+_WindowUnderflow4:
+	l32e	a0, a5, -16
+	l32e	a1, a5, -12
+	l32e	a2, a5,  -8
+	l32e	a3, a5,  -4
+	rfwu
+
+
+/* 8-Register Window Overflow Vector (Handler) */
+
+	.align 64
+.global _WindowOverflow8
+_WindowOverflow8:
+	s32e	a0, a9, -16
+	l32e	a0, a1, -12
+	s32e	a2, a9,  -8
+	s32e	a1, a9, -12
+	s32e	a3, a9,  -4
+	s32e	a4, a0, -32
+	s32e	a5, a0, -28
+	s32e	a6, a0, -24
+	s32e	a7, a0, -20
+	rfwo
+
+/* 8-Register Window Underflow Vector (Handler) */
+
+	.align 64
+.global _WindowUnderflow8
+_WindowUnderflow8:
+	l32e	a1, a9, -12
+	l32e	a0, a9, -16
+	l32e	a7, a1, -12
+	l32e	a2, a9,  -8
+	l32e	a4, a7, -32
+	l32e	a3, a9,  -4
+	l32e	a5, a7, -28
+	l32e	a6, a7, -24
+	l32e	a7, a7, -20
+	rfwu
+
+
+/* 12-Register Window Overflow Vector (Handler) */
+
+	.align 64
+.global _WindowOverflow12
+_WindowOverflow12:
+	s32e	a0,  a13, -16
+	l32e	a0,  a1,  -12
+	s32e	a1,  a13, -12
+	s32e	a2,  a13,  -8
+	s32e	a3,  a13,  -4
+	s32e	a4,  a0,  -48
+	s32e	a5,  a0,  -44
+	s32e	a6,  a0,  -40
+	s32e	a7,  a0,  -36
+	s32e	a8,  a0,  -32
+	s32e	a9,  a0,  -28
+	s32e	a10, a0,  -24
+	s32e	a11, a0,  -20
+	rfwo
+
+/* 12-Register Window Underflow Vector (Handler) */
+
+	.align 64
+.global _WindowUnderflow12
+_WindowUnderflow12:
+	l32e	a1,  a13, -12
+	l32e	a0,  a13, -16
+	l32e	a11, a1,  -12
+	l32e	a2,  a13,  -8
+	l32e	a4,  a11, -48
+	l32e	a8,  a11, -32
+	l32e	a3,  a13,  -4
+	l32e	a5,  a11, -44
+	l32e	a6,  a11, -40
+	l32e	a7,  a11, -36
+	l32e	a9,  a11, -28
+	l32e	a10, a11, -24
+	l32e	a11, a11, -20
+	rfwu
+
+	.text
+
+
diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S
new file mode 100644
index 00000000..88ecea3f
--- /dev/null
+++ b/arch/xtensa/kernel/vmlinux.lds.S
@@ -0,0 +1,272 @@
+/*
+ * arch/xtensa/kernel/vmlinux.lds.S
+ *
+ * Xtensa linker script
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ *
+ * Chris Zankel <chris@zankel.net>
+ * Marc Gauthier <marc@tensilica.com, marc@alumni.uwaterloo.ca>
+ * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com>
+ */
+
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
+#include <asm/thread_info.h>
+
+#include <variant/core.h>
+#include <platform/hardware.h>
+OUTPUT_ARCH(xtensa)
+ENTRY(_start)
+
+#ifdef __XTENSA_EB__
+jiffies = jiffies_64 + 4;
+#else
+jiffies = jiffies_64;
+#endif
+
+#ifndef KERNELOFFSET
+#define KERNELOFFSET 0xd0001000
+#endif
+
+/* Note: In the following macros, it would be nice to specify only the
+   vector name and section kind and construct "sym" and "section" using
+   CPP concatenation, but that does not work reliably.  Concatenating a
+   string with "." produces an invalid token.  CPP will not print a
+   warning because it thinks this is an assembly file, but it leaves
+   them as multiple tokens and there may or may not be whitespace
+   between them.  */
+
+/* Macro for a relocation entry */
+
+#define RELOCATE_ENTRY(sym, section)		\
+	LONG(sym ## _start);			\
+	LONG(sym ## _end);			\
+	LONG(LOADADDR(section))
+
+/* Macro to define a section for a vector.
+ *
+ * Use of the MIN function catches the types of errors illustrated in
+ * the following example:
+ *
+ * Assume the section .DoubleExceptionVector.literal is completely
+ * full.  Then a programmer adds code to .DoubleExceptionVector.text
+ * that produces another literal.  The final literal position will
+ * overlay onto the first word of the adjacent code section
+ * .DoubleExceptionVector.text.  (In practice, the literals will
+ * overwrite the code, and the first few instructions will be
+ * garbage.)
+ */
+
+#define SECTION_VECTOR(sym, section, addr, max_prevsec_size, prevsec)       \
+  section addr : AT((MIN(LOADADDR(prevsec) + max_prevsec_size,		    \
+		         LOADADDR(prevsec) + SIZEOF(prevsec)) + 3) & ~ 3)   \
+  {									    \
+    . = ALIGN(4);							    \
+    sym ## _start = ABSOLUTE(.);		 			    \
+    *(section)								    \
+    sym ## _end = ABSOLUTE(.);						    \
+  }
+
+/*
+ *  Mapping of input sections to output sections when linking.
+ */
+
+SECTIONS
+{
+  . = KERNELOFFSET;
+  /* .text section */
+
+  _text = .;
+  _stext = .;
+  _ftext = .;
+
+  .text :
+  {
+    /* The HEAD_TEXT section must be the first section! */
+    HEAD_TEXT
+    TEXT_TEXT
+    VMLINUX_SYMBOL(__sched_text_start) = .;
+    *(.sched.literal .sched.text)
+    VMLINUX_SYMBOL(__sched_text_end) = .;
+    VMLINUX_SYMBOL(__lock_text_start) = .;
+    *(.spinlock.literal .spinlock.text)
+    VMLINUX_SYMBOL(__lock_text_end) = .;
+
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+
+  . = ALIGN(16);
+
+  RODATA
+
+  /*  Relocation table */
+
+  .fixup   : { *(.fixup) }
+
+  EXCEPTION_TABLE(16)
+  /* Data section */
+
+  _fdata = .;
+  RW_DATA_SECTION(XCHAL_ICACHE_LINESIZE, PAGE_SIZE, THREAD_SIZE)
+  _edata = .;
+
+  /* Initialization code and data: */
+
+  . = ALIGN(PAGE_SIZE);
+  __init_begin = .;
+  INIT_TEXT_SECTION(PAGE_SIZE)
+
+  .init.data :
+  {
+    INIT_DATA
+    . = ALIGN(0x4);
+    __tagtable_begin = .;
+    *(.taglist)
+    __tagtable_end = .;
+
+    . = ALIGN(16);
+    __boot_reloc_table_start = ABSOLUTE(.);
+
+    RELOCATE_ENTRY(_WindowVectors_text,
+		   .WindowVectors.text);
+    RELOCATE_ENTRY(_KernelExceptionVector_text,
+		   .KernelExceptionVector.text);
+    RELOCATE_ENTRY(_UserExceptionVector_text,
+		   .UserExceptionVector.text);
+    RELOCATE_ENTRY(_DoubleExceptionVector_literal,
+		   .DoubleExceptionVector.literal);
+    RELOCATE_ENTRY(_DoubleExceptionVector_text,
+		   .DoubleExceptionVector.text);
+    RELOCATE_ENTRY(_DebugInterruptVector_text,
+		   .DebugInterruptVector.text);
+  
+    __boot_reloc_table_end = ABSOLUTE(.) ;
+
+    INIT_SETUP(XCHAL_ICACHE_LINESIZE)
+    INIT_CALLS
+    CON_INITCALL
+    SECURITY_INITCALL
+    INIT_RAM_FS
+  }
+
+  PERCPU_SECTION(XCHAL_ICACHE_LINESIZE)
+
+  /* We need this dummy segment here */
+
+  . = ALIGN(4);
+  .dummy : { LONG(0) }
+
+  /* The vectors are relocated to the real position at startup time */
+
+  SECTION_VECTOR (_WindowVectors_text,
+		  .WindowVectors.text,
+		  XCHAL_WINDOW_VECTORS_VADDR, 4,
+		  .dummy)
+  SECTION_VECTOR (_DebugInterruptVector_literal,
+		  .DebugInterruptVector.literal,
+		  XCHAL_DEBUG_VECTOR_VADDR - 4,
+		  SIZEOF(.WindowVectors.text),
+		  .WindowVectors.text)
+  SECTION_VECTOR (_DebugInterruptVector_text,
+		  .DebugInterruptVector.text,
+		  XCHAL_DEBUG_VECTOR_VADDR,
+		  4,
+		  .DebugInterruptVector.literal)
+  SECTION_VECTOR (_KernelExceptionVector_literal,
+		  .KernelExceptionVector.literal,
+		  XCHAL_KERNEL_VECTOR_VADDR - 4,
+		  SIZEOF(.DebugInterruptVector.text),
+		  .DebugInterruptVector.text)
+  SECTION_VECTOR (_KernelExceptionVector_text,
+		  .KernelExceptionVector.text,
+		  XCHAL_KERNEL_VECTOR_VADDR,
+		  4,
+		  .KernelExceptionVector.literal)
+  SECTION_VECTOR (_UserExceptionVector_literal,
+		  .UserExceptionVector.literal,
+		  XCHAL_USER_VECTOR_VADDR - 4,
+		  SIZEOF(.KernelExceptionVector.text),
+		  .KernelExceptionVector.text)
+  SECTION_VECTOR (_UserExceptionVector_text,
+		  .UserExceptionVector.text,
+		  XCHAL_USER_VECTOR_VADDR,
+		  4,
+		  .UserExceptionVector.literal)
+  SECTION_VECTOR (_DoubleExceptionVector_literal,
+		  .DoubleExceptionVector.literal,
+		  XCHAL_DOUBLEEXC_VECTOR_VADDR - 16,
+		  SIZEOF(.UserExceptionVector.text),
+		  .UserExceptionVector.text)
+  SECTION_VECTOR (_DoubleExceptionVector_text,
+		  .DoubleExceptionVector.text,
+		  XCHAL_DOUBLEEXC_VECTOR_VADDR,
+		  32,
+		  .DoubleExceptionVector.literal)
+
+  . = (LOADADDR( .DoubleExceptionVector.text ) + SIZEOF( .DoubleExceptionVector.text ) + 3) & ~ 3;
+  . = ALIGN(PAGE_SIZE);
+
+  __init_end = .;
+
+  BSS_SECTION(0, 8192, 0)
+
+  _end = .;
+
+  /* only used by the boot loader  */
+
+  . = ALIGN(0x10);
+  .bootstrap : { *(.bootstrap.literal .bootstrap.text .bootstrap.data) }
+
+  . = ALIGN(0x1000);
+  __initrd_start = .;
+  .initrd : { *(.initrd) }
+  __initrd_end = .;
+
+  .ResetVector.text XCHAL_RESET_VECTOR_VADDR :
+  {
+    *(.ResetVector.text)
+  }
+
+  .xt.lit : { *(.xt.lit) }
+  .xt.prop : { *(.xt.prop) }
+
+  .debug  0 :  { *(.debug) }
+  .line  0 :  { *(.line) }
+  .debug_srcinfo  0 :  { *(.debug_srcinfo) }
+  .debug_sfnames  0 :  { *(.debug_sfnames) }
+  .debug_aranges  0 :  { *(.debug_aranges) }
+  .debug_pubnames  0 :  { *(.debug_pubnames) }
+  .debug_info  0 :  { *(.debug_info) }
+  .debug_abbrev  0 :  { *(.debug_abbrev) }
+  .debug_line  0 :  { *(.debug_line) }
+  .debug_frame  0 :  { *(.debug_frame) }
+  .debug_str  0 :  { *(.debug_str) }
+  .debug_loc  0 :  { *(.debug_loc) }
+  .debug_macinfo  0 :  { *(.debug_macinfo) }
+  .debug_weaknames  0 :  { *(.debug_weaknames) }
+  .debug_funcnames  0 :  { *(.debug_funcnames) }
+  .debug_typenames  0 :  { *(.debug_typenames) }
+  .debug_varnames  0 :  { *(.debug_varnames) }
+
+  .xt.insn 0 :
+  {
+    *(.xt.insn)
+    *(.gnu.linkonce.x*)
+  }
+
+  .xt.lit 0 :
+  {
+    *(.xt.lit)
+    *(.gnu.linkonce.p*)
+  }
+
+  /* Sections to be discarded */
+  DISCARDS
+  /DISCARD/ : { *(.exit.literal) }
+}
diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c
new file mode 100644
index 00000000..c9a7c5b7
--- /dev/null
+++ b/arch/xtensa/kernel/xtensa_ksyms.c
@@ -0,0 +1,97 @@
+/*
+ * arch/xtensa/kernel/xtensa_ksyms.c
+ *
+ * Export Xtensa-specific functions for loadable modules.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005  Tensilica Inc.
+ *
+ * Joe Taylor <joe@tensilica.com>
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <linux/in6.h>
+
+#include <asm/uaccess.h>
+#include <asm/checksum.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#ifdef CONFIG_BLK_DEV_FD
+#include <asm/floppy.h>
+#endif
+#ifdef CONFIG_NET
+#include <net/checksum.h>
+#endif /* CONFIG_NET */
+
+
+/*
+ * String functions
+ */
+EXPORT_SYMBOL(memset);
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memmove);
+
+EXPORT_SYMBOL(kernel_thread);
+
+/*
+ * gcc internal math functions
+ */
+extern long long __ashrdi3(long long, int);
+extern long long __ashldi3(long long, int);
+extern long long __lshrdi3(long long, int);
+extern int __divsi3(int, int);
+extern int __modsi3(int, int);
+extern long long __muldi3(long long, long long);
+extern int __mulsi3(int, int);
+extern unsigned int __udivsi3(unsigned int, unsigned int);
+extern unsigned int __umodsi3(unsigned int, unsigned int);
+extern unsigned long long __umoddi3(unsigned long long, unsigned long long);
+extern unsigned long long __udivdi3(unsigned long long, unsigned long long);
+
+EXPORT_SYMBOL(__ashldi3);
+EXPORT_SYMBOL(__ashrdi3);
+EXPORT_SYMBOL(__lshrdi3);
+EXPORT_SYMBOL(__divsi3);
+EXPORT_SYMBOL(__modsi3);
+EXPORT_SYMBOL(__muldi3);
+EXPORT_SYMBOL(__mulsi3);
+EXPORT_SYMBOL(__udivsi3);
+EXPORT_SYMBOL(__umodsi3);
+EXPORT_SYMBOL(__udivdi3);
+EXPORT_SYMBOL(__umoddi3);
+
+#ifdef CONFIG_NET
+/*
+ * Networking support
+ */
+EXPORT_SYMBOL(csum_partial_copy_generic);
+#endif /* CONFIG_NET */
+
+/*
+ * Architecture-specific symbols
+ */
+EXPORT_SYMBOL(__xtensa_copy_user);
+
+/*
+ * Kernel hacking ...
+ */
+
+#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
+// FIXME EXPORT_SYMBOL(screen_info);
+#endif
+
+EXPORT_SYMBOL(outsb);
+EXPORT_SYMBOL(outsw);
+EXPORT_SYMBOL(outsl);
+EXPORT_SYMBOL(insb);
+EXPORT_SYMBOL(insw);
+EXPORT_SYMBOL(insl);
diff --git a/arch/xtensa/lib/Makefile b/arch/xtensa/lib/Makefile
new file mode 100644
index 00000000..6c4fdd86
--- /dev/null
+++ b/arch/xtensa/lib/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for Xtensa-specific library files.
+#
+
+lib-y	+= memcopy.o memset.o checksum.o \
+	   usercopy.o strncpy_user.o strnlen_user.o
+lib-$(CONFIG_PCI) += pci-auto.o
diff --git a/arch/xtensa/lib/checksum.S b/arch/xtensa/lib/checksum.S
new file mode 100644
index 00000000..df397f93
--- /dev/null
+++ b/arch/xtensa/lib/checksum.S
@@ -0,0 +1,409 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		IP/TCP/UDP checksumming routines
+ *
+ * Xtensa version:  Copyright (C) 2001 Tensilica, Inc. by Kevin Chea
+ *                  Optimized by Joe Taylor
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/errno.h>
+#include <linux/linkage.h>
+#include <variant/core.h>
+
+/*
+ * computes a partial checksum, e.g. for TCP/UDP fragments
+ */
+
+/*
+ * unsigned int csum_partial(const unsigned char *buf, int len,
+ *                           unsigned int sum);
+ *    a2 = buf
+ *    a3 = len
+ *    a4 = sum
+ *
+ * This function assumes 2- or 4-byte alignment.  Other alignments will fail!
+ */
+
+/* ONES_ADD converts twos-complement math to ones-complement. */
+#define ONES_ADD(sum, val)	  \
+	add	sum, sum, val	; \
+	bgeu	sum, val, 99f	; \
+	addi	sum, sum, 1	; \
+99:				;
+
+.text
+ENTRY(csum_partial)
+	  /*
+	   * Experiments with Ethernet and SLIP connections show that buf
+	   * is aligned on either a 2-byte or 4-byte boundary.
+	   */
+	entry	sp, 32
+	extui	a5, a2, 0, 2
+	bnez	a5, 8f		/* branch if 2-byte aligned */
+	/* Fall-through on common case, 4-byte alignment */
+1:
+	srli	a5, a3, 5	/* 32-byte chunks */
+#if XCHAL_HAVE_LOOPS
+	loopgtz	a5, 2f
+#else
+	beqz	a5, 2f
+	slli	a5, a5, 5
+	add	a5, a5, a2	/* a5 = end of last 32-byte chunk */
+.Loop1:
+#endif
+	l32i	a6, a2, 0
+	l32i	a7, a2, 4
+	ONES_ADD(a4, a6)
+	ONES_ADD(a4, a7)
+	l32i	a6, a2, 8
+	l32i	a7, a2, 12
+	ONES_ADD(a4, a6)
+	ONES_ADD(a4, a7)
+	l32i	a6, a2, 16
+	l32i	a7, a2, 20
+	ONES_ADD(a4, a6)
+	ONES_ADD(a4, a7)
+	l32i	a6, a2, 24
+	l32i	a7, a2, 28
+	ONES_ADD(a4, a6)
+	ONES_ADD(a4, a7)
+	addi	a2, a2, 4*8
+#if !XCHAL_HAVE_LOOPS
+	blt	a2, a5, .Loop1
+#endif
+2:
+	extui	a5, a3, 2, 3	/* remaining 4-byte chunks */
+#if XCHAL_HAVE_LOOPS
+	loopgtz	a5, 3f
+#else
+	beqz	a5, 3f
+	slli	a5, a5, 2
+	add	a5, a5, a2	/* a5 = end of last 4-byte chunk */
+.Loop2:
+#endif
+	l32i	a6, a2, 0
+	ONES_ADD(a4, a6)
+	addi	a2, a2, 4
+#if !XCHAL_HAVE_LOOPS
+	blt	a2, a5, .Loop2
+#endif
+3:
+	_bbci.l	a3, 1, 5f	/* remaining 2-byte chunk */
+	l16ui	a6, a2, 0
+	ONES_ADD(a4, a6)
+	addi	a2, a2, 2
+5:
+	_bbci.l	a3, 0, 7f	/* remaining 1-byte chunk */
+6:	l8ui	a6, a2, 0
+#ifdef __XTENSA_EB__
+	slli	a6, a6, 8	/* load byte into bits 8..15 */
+#endif
+	ONES_ADD(a4, a6)
+7:
+	mov	a2, a4
+	retw
+
+	/* uncommon case, buf is 2-byte aligned */
+8:
+	beqz	a3, 7b		/* branch if len == 0 */
+	beqi	a3, 1, 6b	/* branch if len == 1 */
+
+	extui	a5, a2, 0, 1
+	bnez	a5, 8f		/* branch if 1-byte aligned */
+
+	l16ui	a6, a2, 0	/* common case, len >= 2 */
+	ONES_ADD(a4, a6)
+	addi	a2, a2, 2	/* adjust buf */
+	addi	a3, a3, -2	/* adjust len */
+	j	1b		/* now buf is 4-byte aligned */
+
+	/* case: odd-byte aligned, len > 1
+	 * This case is dog slow, so don't give us an odd address.
+	 * (I don't think this ever happens, but just in case.)
+	 */
+8:
+	srli	a5, a3, 2	/* 4-byte chunks */
+#if XCHAL_HAVE_LOOPS
+	loopgtz	a5, 2f
+#else
+	beqz	a5, 2f
+	slli	a5, a5, 2
+	add	a5, a5, a2	/* a5 = end of last 4-byte chunk */
+.Loop3:
+#endif
+	l8ui	a6, a2, 0	/* bits 24..31 */
+	l16ui	a7, a2, 1	/* bits  8..23 */
+	l8ui	a8, a2, 3	/* bits  0.. 8 */
+#ifdef	__XTENSA_EB__
+	slli	a6, a6, 24
+#else
+	slli	a8, a8, 24
+#endif
+	slli	a7, a7, 8
+	or	a7, a7, a6
+	or	a7, a7, a8
+	ONES_ADD(a4, a7)
+	addi	a2, a2, 4
+#if !XCHAL_HAVE_LOOPS
+	blt	a2, a5, .Loop3
+#endif
+2:
+	_bbci.l	a3, 1, 3f	/* remaining 2-byte chunk, still odd addr */
+	l8ui	a6, a2, 0
+	l8ui	a7, a2, 1
+#ifdef	__XTENSA_EB__
+	slli	a6, a6, 8
+#else
+	slli	a7, a7, 8
+#endif
+	or	a7, a7, a6
+	ONES_ADD(a4, a7)
+	addi	a2, a2, 2
+3:
+	j	5b		/* branch to handle the remaining byte */
+
+
+
+/*
+ * Copy from ds while checksumming, otherwise like csum_partial
+ *
+ * The macros SRC and DST specify the type of access for the instruction.
+ * thus we can call a custom exception handler for each access type.
+ */
+
+#define SRC(y...)			\
+	9999: y;			\
+	.section __ex_table, "a";	\
+	.long 9999b, 6001f	;	\
+	.previous
+
+#define DST(y...)			\
+	9999: y;			\
+	.section __ex_table, "a";	\
+	.long 9999b, 6002f	;	\
+	.previous
+
+/*
+unsigned int csum_partial_copy_generic (const char *src, char *dst, int len,
+					int sum, int *src_err_ptr, int *dst_err_ptr)
+	a2  = src
+	a3  = dst
+	a4  = len
+	a5  = sum
+	a6  = src_err_ptr
+	a7  = dst_err_ptr
+	a8  = temp
+	a9  = temp
+	a10 = temp
+	a11 = original len for exception handling
+	a12 = original dst for exception handling
+
+    This function is optimized for 4-byte aligned addresses.  Other
+    alignments work, but not nearly as efficiently.
+ */
+
+ENTRY(csum_partial_copy_generic)
+	entry	sp, 32
+	mov	a12, a3
+	mov	a11, a4
+	or	a10, a2, a3
+
+	/* We optimize the following alignment tests for the 4-byte
+	aligned case.  Two bbsi.l instructions might seem more optimal
+	(commented out below).  However, both labels 5: and 3: are out
+	of the imm8 range, so the assembler relaxes them into
+	equivalent bbci.l, j combinations, which is actually
+	slower. */
+
+	extui	a9, a10, 0, 2
+	beqz	a9, 1f		/* branch if both are 4-byte aligned */
+	bbsi.l	a10, 0, 5f	/* branch if one address is odd */
+	j	3f		/* one address is 2-byte aligned */
+
+/*	_bbsi.l	a10, 0, 5f */	/* branch if odd address */
+/*	_bbsi.l	a10, 1, 3f */	/* branch if 2-byte-aligned address */
+
+1:
+	/* src and dst are both 4-byte aligned */
+	srli	a10, a4, 5	/* 32-byte chunks */
+#if XCHAL_HAVE_LOOPS
+	loopgtz	a10, 2f
+#else
+	beqz	a10, 2f
+	slli	a10, a10, 5
+	add	a10, a10, a2	/* a10 = end of last 32-byte src chunk */
+.Loop5:
+#endif
+SRC(	l32i	a9, a2, 0	)
+SRC(	l32i	a8, a2, 4	)
+DST(	s32i	a9, a3, 0	)
+DST(	s32i	a8, a3, 4	)
+	ONES_ADD(a5, a9)
+	ONES_ADD(a5, a8)
+SRC(	l32i	a9, a2, 8	)
+SRC(	l32i	a8, a2, 12	)
+DST(	s32i	a9, a3, 8	)
+DST(	s32i	a8, a3, 12	)
+	ONES_ADD(a5, a9)
+	ONES_ADD(a5, a8)
+SRC(	l32i	a9, a2, 16	)
+SRC(	l32i	a8, a2, 20	)
+DST(	s32i	a9, a3, 16	)
+DST(	s32i	a8, a3, 20	)
+	ONES_ADD(a5, a9)
+	ONES_ADD(a5, a8)
+SRC(	l32i	a9, a2, 24	)
+SRC(	l32i	a8, a2, 28	)
+DST(	s32i	a9, a3, 24	)
+DST(	s32i	a8, a3, 28	)
+	ONES_ADD(a5, a9)
+	ONES_ADD(a5, a8)
+	addi	a2, a2, 32
+	addi	a3, a3, 32
+#if !XCHAL_HAVE_LOOPS
+	blt	a2, a10, .Loop5
+#endif
+2:
+	extui	a10, a4, 2, 3	/* remaining 4-byte chunks */
+	extui	a4, a4, 0, 2	/* reset len for general-case, 2-byte chunks */
+#if XCHAL_HAVE_LOOPS
+	loopgtz	a10, 3f
+#else
+	beqz	a10, 3f
+	slli	a10, a10, 2
+	add	a10, a10, a2	/* a10 = end of last 4-byte src chunk */
+.Loop6:
+#endif
+SRC(	l32i	a9, a2, 0	)
+DST(	s32i	a9, a3, 0	)
+	ONES_ADD(a5, a9)
+	addi	a2, a2, 4
+	addi	a3, a3, 4
+#if !XCHAL_HAVE_LOOPS
+	blt	a2, a10, .Loop6
+#endif
+3:
+	/*
+	Control comes to here in two cases: (1) It may fall through
+	to here from the 4-byte alignment case to process, at most,
+	one 2-byte chunk.  (2) It branches to here from above if
+	either src or dst is 2-byte aligned, and we process all bytes
+	here, except for perhaps a trailing odd byte.  It's
+	inefficient, so align your addresses to 4-byte boundaries.
+
+	a2 = src
+	a3 = dst
+	a4 = len
+	a5 = sum
+	*/
+	srli	a10, a4, 1	/* 2-byte chunks */
+#if XCHAL_HAVE_LOOPS
+	loopgtz	a10, 4f
+#else
+	beqz	a10, 4f
+	slli	a10, a10, 1
+	add	a10, a10, a2	/* a10 = end of last 2-byte src chunk */
+.Loop7:
+#endif
+SRC(	l16ui	a9, a2, 0	)
+DST(	s16i	a9, a3, 0	)
+	ONES_ADD(a5, a9)
+	addi	a2, a2, 2
+	addi	a3, a3, 2
+#if !XCHAL_HAVE_LOOPS
+	blt	a2, a10, .Loop7
+#endif
+4:
+	/* This section processes a possible trailing odd byte. */
+	_bbci.l	a4, 0, 8f	/* 1-byte chunk */
+SRC(	l8ui	a9, a2, 0	)
+DST(	s8i	a9, a3, 0	)
+#ifdef __XTENSA_EB__
+	slli	a9, a9, 8	/* shift byte to bits 8..15 */
+#endif
+	ONES_ADD(a5, a9)
+8:
+	mov	a2, a5
+	retw
+
+5:
+	/* Control branch to here when either src or dst is odd.  We
+	process all bytes using 8-bit accesses.  Grossly inefficient,
+	so don't feed us an odd address. */
+
+	srli	a10, a4, 1	/* handle in pairs for 16-bit csum */
+#if XCHAL_HAVE_LOOPS
+	loopgtz	a10, 6f
+#else
+	beqz	a10, 6f
+	slli	a10, a10, 1
+	add	a10, a10, a2	/* a10 = end of last odd-aligned, 2-byte src chunk */
+.Loop8:
+#endif
+SRC(	l8ui	a9, a2, 0	)
+SRC(	l8ui	a8, a2, 1	)
+DST(	s8i	a9, a3, 0	)
+DST(	s8i	a8, a3, 1	)
+#ifdef __XTENSA_EB__
+	slli	a9, a9, 8	/* combine into a single 16-bit value */
+#else				/* for checksum computation */
+	slli	a8, a8, 8
+#endif
+	or	a9, a9, a8
+	ONES_ADD(a5, a9)
+	addi	a2, a2, 2
+	addi	a3, a3, 2
+#if !XCHAL_HAVE_LOOPS
+	blt	a2, a10, .Loop8
+#endif
+6:
+	j	4b		/* process the possible trailing odd byte */
+
+
+# Exception handler:
+.section .fixup, "ax"
+/*
+	a6  = src_err_ptr
+	a7  = dst_err_ptr
+	a11 = original len for exception handling
+	a12 = original dst for exception handling
+*/
+
+6001:
+	_movi	a2, -EFAULT
+	s32i	a2, a6, 0	/* src_err_ptr */
+
+	# clear the complete destination - computing the rest
+	# is too much work
+	movi	a2, 0
+#if XCHAL_HAVE_LOOPS
+	loopgtz	a11, 2f
+#else
+	beqz	a11, 2f
+	add	a11, a11, a12	/* a11 = ending address */
+.Leloop:
+#endif
+	s8i	a2, a12, 0
+	addi	a12, a12, 1
+#if !XCHAL_HAVE_LOOPS
+	blt	a12, a11, .Leloop
+#endif
+2:
+	retw
+
+6002:
+	movi	a2, -EFAULT
+	s32i	a2, a7, 0	/* dst_err_ptr */
+	movi	a2, 0
+	retw
+
+.previous
+
diff --git a/arch/xtensa/lib/memcopy.S b/arch/xtensa/lib/memcopy.S
new file mode 100644
index 00000000..ea59dcd0
--- /dev/null
+++ b/arch/xtensa/lib/memcopy.S
@@ -0,0 +1,315 @@
+/*
+ * arch/xtensa/lib/hal/memcopy.S -- Core HAL library functions
+ * xthal_memcpy and xthal_bcopy
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002 - 2005 Tensilica Inc.
+ */
+
+#include <variant/core.h>
+
+	.macro	src_b	r, w0, w1
+#ifdef __XTENSA_EB__
+	src	\r, \w0, \w1
+#else
+	src	\r, \w1, \w0
+#endif
+	.endm
+
+	.macro	ssa8	r
+#ifdef __XTENSA_EB__
+	ssa8b	\r
+#else
+	ssa8l	\r
+#endif
+	.endm
+
+
+/*
+ * void *memcpy(void *dst, const void *src, size_t len);
+ * void *memmove(void *dst, const void *src, size_t len);
+ * void *bcopy(const void *src, void *dst, size_t len);
+ *
+ * This function is intended to do the same thing as the standard
+ * library function memcpy() (or bcopy()) for most cases.
+ * However, where the source and/or destination references
+ * an instruction RAM or ROM or a data RAM or ROM, that
+ * source and/or destination will always be accessed with
+ * 32-bit load and store instructions (as required for these
+ * types of devices).
+ *
+ * !!!!!!!  XTFIXME:
+ * !!!!!!!  Handling of IRAM/IROM has not yet
+ * !!!!!!!  been implemented.
+ *
+ * The bcopy version is provided here to avoid the overhead
+ * of an extra call, for callers that require this convention.
+ *
+ * The (general case) algorithm is as follows:
+ *   If destination is unaligned, align it by conditionally
+ *     copying 1 and 2 bytes.
+ *   If source is aligned,
+ *     do 16 bytes with a loop, and then finish up with
+ *     8, 4, 2, and 1 byte copies conditional on the length;
+ *   else (if source is unaligned),
+ *     do the same, but use SRC to align the source data.
+ *   This code tries to use fall-through branches for the common
+ *     case of aligned source and destination and multiple
+ *     of 4 (or 8) length.
+ *
+ * Register use:
+ *	a0/ return address
+ *	a1/ stack pointer
+ *	a2/ return value
+ *	a3/ src
+ *	a4/ length
+ *	a5/ dst
+ *	a6/ tmp
+ *	a7/ tmp
+ *	a8/ tmp
+ *	a9/ tmp
+ *	a10/ tmp
+ *	a11/ tmp
+ */
+
+	.text
+	.align	4
+	.global	bcopy
+	.type   bcopy,@function
+bcopy:
+	entry	sp, 16		# minimal stack frame
+	# a2=src, a3=dst, a4=len
+	mov	a5, a3		# copy dst so that a2 is return value
+	mov	a3, a2
+	mov	a2, a5
+	j	.Lcommon	# go to common code for memcpy+bcopy
+
+
+/*
+ * Byte by byte copy
+ */
+	.align	4
+	.byte	0		# 1 mod 4 alignment for LOOPNEZ
+				# (0 mod 4 alignment for LBEG)
+.Lbytecopy:
+#if XCHAL_HAVE_LOOPS
+	loopnez	a4, .Lbytecopydone
+#else /* !XCHAL_HAVE_LOOPS */
+	beqz	a4, .Lbytecopydone
+	add	a7, a3, a4	# a7 = end address for source
+#endif /* !XCHAL_HAVE_LOOPS */
+.Lnextbyte:
+	l8ui	a6, a3, 0
+	addi	a3, a3, 1
+	s8i	a6, a5, 0
+	addi	a5, a5, 1
+#if !XCHAL_HAVE_LOOPS
+	blt	a3, a7, .Lnextbyte
+#endif /* !XCHAL_HAVE_LOOPS */
+.Lbytecopydone:
+	retw
+
+/*
+ * Destination is unaligned
+ */
+
+	.align	4
+.Ldst1mod2:	# dst is only byte aligned
+	_bltui	a4, 7, .Lbytecopy	# do short copies byte by byte
+
+	# copy 1 byte
+	l8ui	a6, a3,  0
+	addi	a3, a3,  1
+	addi	a4, a4, -1
+	s8i	a6, a5,  0
+	addi	a5, a5,  1
+	_bbci.l	a5, 1, .Ldstaligned	# if dst is now aligned, then
+					# return to main algorithm
+.Ldst2mod4:	# dst 16-bit aligned
+	# copy 2 bytes
+	_bltui	a4, 6, .Lbytecopy	# do short copies byte by byte
+	l8ui	a6, a3,  0
+	l8ui	a7, a3,  1
+	addi	a3, a3,  2
+	addi	a4, a4, -2
+	s8i	a6, a5,  0
+	s8i	a7, a5,  1
+	addi	a5, a5,  2
+	j	.Ldstaligned	# dst is now aligned, return to main algorithm
+
+	.align	4
+	.global	memcpy
+	.type   memcpy,@function
+memcpy:
+	.global	memmove
+	.type   memmove,@function
+memmove:
+
+	entry	sp, 16		# minimal stack frame
+	# a2/ dst, a3/ src, a4/ len
+	mov	a5, a2		# copy dst so that a2 is return value
+.Lcommon:
+	_bbsi.l	a2, 0, .Ldst1mod2	# if dst is 1 mod 2
+	_bbsi.l	a2, 1, .Ldst2mod4	# if dst is 2 mod 4
+.Ldstaligned:	# return here from .Ldst?mod? once dst is aligned
+	srli	a7, a4, 4	# number of loop iterations with 16B
+				# per iteration
+	movi	a8, 3		# if source is not aligned,
+	_bany	a3, a8, .Lsrcunaligned	# then use shifting copy
+	/*
+	 * Destination and source are word-aligned, use word copy.
+	 */
+	# copy 16 bytes per iteration for word-aligned dst and word-aligned src
+#if XCHAL_HAVE_LOOPS
+	loopnez	a7, .Loop1done
+#else /* !XCHAL_HAVE_LOOPS */
+	beqz	a7, .Loop1done
+	slli	a8, a7, 4
+	add	a8, a8, a3	# a8 = end of last 16B source chunk
+#endif /* !XCHAL_HAVE_LOOPS */
+.Loop1:
+	l32i	a6, a3,  0
+	l32i	a7, a3,  4
+	s32i	a6, a5,  0
+	l32i	a6, a3,  8
+	s32i	a7, a5,  4
+	l32i	a7, a3, 12
+	s32i	a6, a5,  8
+	addi	a3, a3, 16
+	s32i	a7, a5, 12
+	addi	a5, a5, 16
+#if !XCHAL_HAVE_LOOPS
+	blt	a3, a8, .Loop1
+#endif /* !XCHAL_HAVE_LOOPS */
+.Loop1done:
+	bbci.l	a4, 3, .L2
+	# copy 8 bytes
+	l32i	a6, a3,  0
+	l32i	a7, a3,  4
+	addi	a3, a3,  8
+	s32i	a6, a5,  0
+	s32i	a7, a5,  4
+	addi	a5, a5,  8
+.L2:
+	bbsi.l	a4, 2, .L3
+	bbsi.l	a4, 1, .L4
+	bbsi.l	a4, 0, .L5
+	retw
+.L3:
+	# copy 4 bytes
+	l32i	a6, a3,  0
+	addi	a3, a3,  4
+	s32i	a6, a5,  0
+	addi	a5, a5,  4
+	bbsi.l	a4, 1, .L4
+	bbsi.l	a4, 0, .L5
+	retw
+.L4:
+	# copy 2 bytes
+	l16ui	a6, a3,  0
+	addi	a3, a3,  2
+	s16i	a6, a5,  0
+	addi	a5, a5,  2
+	bbsi.l	a4, 0, .L5
+	retw
+.L5:
+	# copy 1 byte
+	l8ui	a6, a3,  0
+	s8i	a6, a5,  0
+	retw
+
+/*
+ * Destination is aligned, Source is unaligned
+ */
+
+	.align	4
+.Lsrcunaligned:
+	_beqz	a4, .Ldone	# avoid loading anything for zero-length copies
+	# copy 16 bytes per iteration for word-aligned dst and unaligned src
+	ssa8	a3		# set shift amount from byte offset
+#define SIM_CHECKS_ALIGNMENT	1	/* set to 1 when running on ISS (simulator) with the
+					   lint or ferret client, or 0 to save a few cycles */
+#if XCHAL_UNALIGNED_LOAD_EXCEPTION || SIM_CHECKS_ALIGNMENT
+	and	a11, a3, a8	# save unalignment offset for below
+	sub	a3, a3, a11	# align a3
+#endif
+	l32i	a6, a3, 0	# load first word
+#if XCHAL_HAVE_LOOPS
+	loopnez	a7, .Loop2done
+#else /* !XCHAL_HAVE_LOOPS */
+	beqz	a7, .Loop2done
+	slli	a10, a7, 4
+	add	a10, a10, a3	# a10 = end of last 16B source chunk
+#endif /* !XCHAL_HAVE_LOOPS */
+.Loop2:
+	l32i	a7, a3,  4
+	l32i	a8, a3,  8
+	src_b	a6, a6, a7
+	s32i	a6, a5,  0
+	l32i	a9, a3, 12
+	src_b	a7, a7, a8
+	s32i	a7, a5,  4
+	l32i	a6, a3, 16
+	src_b	a8, a8, a9
+	s32i	a8, a5,  8
+	addi	a3, a3, 16
+	src_b	a9, a9, a6
+	s32i	a9, a5, 12
+	addi	a5, a5, 16
+#if !XCHAL_HAVE_LOOPS
+	blt	a3, a10, .Loop2
+#endif /* !XCHAL_HAVE_LOOPS */
+.Loop2done:
+	bbci.l	a4, 3, .L12
+	# copy 8 bytes
+	l32i	a7, a3,  4
+	l32i	a8, a3,  8
+	src_b	a6, a6, a7
+	s32i	a6, a5,  0
+	addi	a3, a3,  8
+	src_b	a7, a7, a8
+	s32i	a7, a5,  4
+	addi	a5, a5,  8
+	mov	a6, a8
+.L12:
+	bbci.l	a4, 2, .L13
+	# copy 4 bytes
+	l32i	a7, a3,  4
+	addi	a3, a3,  4
+	src_b	a6, a6, a7
+	s32i	a6, a5,  0
+	addi	a5, a5,  4
+	mov	a6, a7
+.L13:
+#if XCHAL_UNALIGNED_LOAD_EXCEPTION || SIM_CHECKS_ALIGNMENT
+	add	a3, a3, a11	# readjust a3 with correct misalignment
+#endif
+	bbsi.l	a4, 1, .L14
+	bbsi.l	a4, 0, .L15
+.Ldone:	retw
+.L14:
+	# copy 2 bytes
+	l8ui	a6, a3,  0
+	l8ui	a7, a3,  1
+	addi	a3, a3,  2
+	s8i	a6, a5,  0
+	s8i	a7, a5,  1
+	addi	a5, a5,  2
+	bbsi.l	a4, 0, .L15
+	retw
+.L15:
+	# copy 1 byte
+	l8ui	a6, a3,  0
+	s8i	a6, a5,  0
+	retw
+
+/*
+ * Local Variables:
+ * mode:fundamental
+ * comment-start: "# "
+ * comment-start-skip: "# *"
+ * End:
+ */
diff --git a/arch/xtensa/lib/memset.S b/arch/xtensa/lib/memset.S
new file mode 100644
index 00000000..10b8c400
--- /dev/null
+++ b/arch/xtensa/lib/memset.S
@@ -0,0 +1,160 @@
+/*
+ *  arch/xtensa/lib/memset.S
+ *
+ *  ANSI C standard library function memset
+ *  (Well, almost.  .fixup code might return zero.)
+ *
+ *  This file is subject to the terms and conditions of the GNU General
+ *  Public License.  See the file "COPYING" in the main directory of
+ *  this archive for more details.
+ *
+ *  Copyright (C) 2002 Tensilica Inc.
+ */
+
+#include <variant/core.h>
+
+/*
+ * void *memset(void *dst, int c, size_t length)
+ *
+ * The algorithm is as follows:
+ *   Create a word with c in all byte positions
+ *   If the destination is aligned,
+ *     do 16B chucks with a loop, and then finish up with
+ *     8B, 4B, 2B, and 1B stores conditional on the length.
+ *   If destination is unaligned, align it by conditionally
+ *     setting 1B and 2B and then go to aligned case.
+ *   This code tries to use fall-through branches for the common
+ *     case of an aligned destination (except for the branches to
+ *     the alignment labels).
+ */
+
+/* Load or store instructions that may cause exceptions use the EX macro. */
+
+#define EX(insn,reg1,reg2,offset,handler)	\
+9:	insn	reg1, reg2, offset;		\
+	.section __ex_table, "a";		\
+	.word	9b, handler;			\
+	.previous
+
+
+.text
+.align	4
+.global	memset
+.type	memset,@function
+memset:
+	entry	sp, 16		# minimal stack frame
+	# a2/ dst, a3/ c, a4/ length
+	extui	a3, a3, 0, 8	# mask to just 8 bits
+	slli	a7, a3, 8	# duplicate character in all bytes of word
+	or	a3, a3, a7	# ...
+	slli	a7, a3, 16	# ...
+	or	a3, a3, a7	# ...
+	mov	a5, a2		# copy dst so that a2 is return value
+	movi	a6, 3		# for alignment tests
+	bany	a2, a6, .Ldstunaligned # if dst is unaligned
+.L0:	# return here from .Ldstunaligned when dst is aligned
+	srli	a7, a4, 4	# number of loop iterations with 16B
+				# per iteration
+	bnez	a4, .Laligned
+	retw
+
+/*
+ * Destination is word-aligned.
+ */
+	# set 16 bytes per iteration for word-aligned dst
+	.align	4		# 1 mod 4 alignment for LOOPNEZ
+	.byte	0		# (0 mod 4 alignment for LBEG)
+.Laligned:
+#if XCHAL_HAVE_LOOPS
+	loopnez	a7, .Loop1done
+#else /* !XCHAL_HAVE_LOOPS */
+	beqz	a7, .Loop1done
+	slli	a6, a7, 4
+	add	a6, a6, a5	# a6 = end of last 16B chunk
+#endif /* !XCHAL_HAVE_LOOPS */
+.Loop1:
+	EX(s32i, a3, a5,  0, memset_fixup)
+	EX(s32i, a3, a5,  4, memset_fixup)
+	EX(s32i, a3, a5,  8, memset_fixup)
+	EX(s32i, a3, a5, 12, memset_fixup)
+	addi	a5, a5, 16
+#if !XCHAL_HAVE_LOOPS
+	blt	a5, a6, .Loop1
+#endif /* !XCHAL_HAVE_LOOPS */
+.Loop1done:
+	bbci.l	a4, 3, .L2
+	# set 8 bytes
+	EX(s32i, a3, a5,  0, memset_fixup)
+	EX(s32i, a3, a5,  4, memset_fixup)
+	addi	a5, a5,  8
+.L2:
+	bbci.l	a4, 2, .L3
+	# set 4 bytes
+	EX(s32i, a3, a5,  0, memset_fixup)
+	addi	a5, a5,  4
+.L3:
+	bbci.l	a4, 1, .L4
+	# set 2 bytes
+	EX(s16i, a3, a5,  0, memset_fixup)
+	addi	a5, a5,  2
+.L4:
+	bbci.l	a4, 0, .L5
+	# set 1 byte
+	EX(s8i, a3, a5,  0, memset_fixup)
+.L5:
+.Lret1:
+	retw
+
+/*
+ * Destination is unaligned
+ */
+
+.Ldstunaligned:
+	bltui	a4, 8, .Lbyteset	# do short copies byte by byte
+	bbci.l	a5, 0, .L20		# branch if dst alignment half-aligned
+	# dst is only byte aligned
+	# set 1 byte
+	EX(s8i, a3, a5,  0, memset_fixup)
+	addi	a5, a5,  1
+	addi	a4, a4, -1
+	# now retest if dst aligned
+	bbci.l	a5, 1, .L0	# if now aligned, return to main algorithm
+.L20:
+	# dst half-aligned
+	# set 2 bytes
+	EX(s16i, a3, a5,  0, memset_fixup)
+	addi	a5, a5,  2
+	addi	a4, a4, -2
+	j	.L0		# dst is now aligned, return to main algorithm
+
+/*
+ * Byte by byte set
+ */
+	.align	4
+	.byte	0		# 1 mod 4 alignment for LOOPNEZ
+				# (0 mod 4 alignment for LBEG)
+.Lbyteset:
+#if XCHAL_HAVE_LOOPS
+	loopnez	a4, .Lbytesetdone
+#else /* !XCHAL_HAVE_LOOPS */
+	beqz	a4, .Lbytesetdone
+	add	a6, a5, a4	# a6 = ending address
+#endif /* !XCHAL_HAVE_LOOPS */
+.Lbyteloop:
+	EX(s8i, a3, a5, 0, memset_fixup)
+	addi	a5, a5, 1
+#if !XCHAL_HAVE_LOOPS
+	blt	a5, a6, .Lbyteloop
+#endif /* !XCHAL_HAVE_LOOPS */
+.Lbytesetdone:
+	retw
+
+
+	.section .fixup, "ax"
+	.align	4
+
+/* We return zero if a failure occurred. */
+
+memset_fixup:
+	movi	a2, 0
+	retw
diff --git a/arch/xtensa/lib/pci-auto.c b/arch/xtensa/lib/pci-auto.c
new file mode 100644
index 00000000..a71733ae
--- /dev/null
+++ b/arch/xtensa/lib/pci-auto.c
@@ -0,0 +1,352 @@
+/*
+ * arch/xtensa/lib/pci-auto.c
+ *
+ * PCI autoconfiguration library
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ *
+ * Chris Zankel <zankel@tensilica.com, cez@zankel.net>
+ *
+ * Based on work from Matt Porter <mporter@mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <asm/pci-bridge.h>
+
+
+/*
+ *
+ * Setting up a PCI
+ *
+ * pci_ctrl->first_busno = <first bus number (0)>
+ * pci_ctrl->last_busno = <last bus number (0xff)>
+ * pci_ctrl->ops = <PCI config operations>
+ * pci_ctrl->map_irq = <function to return the interrupt number for a device>
+ *
+ * pci_ctrl->io_space.start = <IO space start address (PCI view)>
+ * pci_ctrl->io_space.end = <IO space end address (PCI view)>
+ * pci_ctrl->io_space.base = <IO space offset: address 0 from CPU space>
+ * pci_ctrl->mem_space.start = <MEM space start address (PCI view)>
+ * pci_ctrl->mem_space.end = <MEM space end address (PCI view)>
+ * pci_ctrl->mem_space.base = <MEM space offset: address 0 from CPU space>
+ *
+ * pcibios_init_resource(&pci_ctrl->io_resource, <IO space start>,
+ * 			 <IO space end>, IORESOURCE_IO, "PCI host bridge");
+ * pcibios_init_resource(&pci_ctrl->mem_resources[0], <MEM space start>,
+ * 			 <MEM space end>, IORESOURCE_MEM, "PCI host bridge");
+ *
+ * pci_ctrl->last_busno = pciauto_bus_scan(pci_ctrl,pci_ctrl->first_busno);
+ *
+ * int __init pciauto_bus_scan(struct pci_controller *pci_ctrl, int current_bus)
+ *
+ */
+
+
+/* define DEBUG to print some debugging messages. */
+
+#undef DEBUG
+
+#ifdef DEBUG
+# define DBG(x...) printk(x)
+#else
+# define DBG(x...)
+#endif
+
+static int pciauto_upper_iospc;
+static int pciauto_upper_memspc;
+
+static struct pci_dev pciauto_dev;
+static struct pci_bus pciauto_bus;
+
+/*
+ * Helper functions
+ */
+
+/* Initialize the bars of a PCI device.  */
+
+static void __init
+pciauto_setup_bars(struct pci_dev *dev, int bar_limit)
+{
+	int bar_size;
+	int bar, bar_nr;
+	int *upper_limit;
+	int found_mem64 = 0;
+
+	for (bar = PCI_BASE_ADDRESS_0, bar_nr = 0;
+	     bar <= bar_limit;
+	     bar+=4, bar_nr++)
+	{
+		/* Tickle the BAR and get the size */
+		pci_write_config_dword(dev, bar, 0xffffffff);
+		pci_read_config_dword(dev, bar, &bar_size);
+
+		/* If BAR is not implemented go to the next BAR */
+		if (!bar_size)
+			continue;
+
+		/* Check the BAR type and set our address mask */
+		if (bar_size & PCI_BASE_ADDRESS_SPACE_IO)
+		{
+			bar_size &= PCI_BASE_ADDRESS_IO_MASK;
+			upper_limit = &pciauto_upper_iospc;
+			DBG("PCI Autoconfig: BAR %d, I/O, ", bar_nr);
+		}
+		else
+		{
+			if ((bar_size & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
+			    PCI_BASE_ADDRESS_MEM_TYPE_64)
+				found_mem64 = 1;
+
+			bar_size &= PCI_BASE_ADDRESS_MEM_MASK;
+			upper_limit = &pciauto_upper_memspc;
+			DBG("PCI Autoconfig: BAR %d, Mem, ", bar_nr);
+		}
+
+		/* Allocate a base address (bar_size is negative!) */
+		*upper_limit = (*upper_limit + bar_size) & bar_size;
+
+		/* Write it out and update our limit */
+		pci_write_config_dword(dev, bar, *upper_limit);
+
+		/*
+		 * If we are a 64-bit decoder then increment to the
+		 * upper 32 bits of the bar and force it to locate
+		 * in the lower 4GB of memory.
+		 */
+
+		if (found_mem64)
+			pci_write_config_dword(dev, (bar+=4), 0x00000000);
+
+		DBG("size=0x%x, address=0x%x\n", ~bar_size + 1, *upper_limit);
+	}
+}
+
+/* Initialize the interrupt number. */
+
+static void __init
+pciauto_setup_irq(struct pci_controller* pci_ctrl,struct pci_dev *dev,int devfn)
+{
+	u8 pin;
+	int irq = 0;
+
+	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+
+	/* Fix illegal pin numbers. */
+
+	if (pin == 0 || pin > 4)
+		pin = 1;
+
+	if (pci_ctrl->map_irq)
+		irq = pci_ctrl->map_irq(dev, PCI_SLOT(devfn), pin);
+
+	if (irq == -1)
+		irq = 0;
+
+	DBG("PCI Autoconfig: Interrupt %d, pin %d\n", irq, pin);
+
+	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+}
+
+
+static void __init
+pciauto_prescan_setup_bridge(struct pci_dev *dev, int current_bus,
+			     int sub_bus, int *iosave, int *memsave)
+{
+	/* Configure bus number registers */
+	pci_write_config_byte(dev, PCI_PRIMARY_BUS, current_bus);
+	pci_write_config_byte(dev, PCI_SECONDARY_BUS, sub_bus + 1);
+	pci_write_config_byte(dev, PCI_SUBORDINATE_BUS,	0xff);
+
+	/* Round memory allocator to 1MB boundary */
+	pciauto_upper_memspc &= ~(0x100000 - 1);
+	*memsave = pciauto_upper_memspc;
+
+	/* Round I/O allocator to 4KB boundary */
+	pciauto_upper_iospc &= ~(0x1000 - 1);
+	*iosave = pciauto_upper_iospc;
+
+	/* Set up memory and I/O filter limits, assume 32-bit I/O space */
+	pci_write_config_word(dev, PCI_MEMORY_LIMIT,
+			      ((pciauto_upper_memspc - 1) & 0xfff00000) >> 16);
+	pci_write_config_byte(dev, PCI_IO_LIMIT,
+			      ((pciauto_upper_iospc - 1) & 0x0000f000) >> 8);
+	pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16,
+			      ((pciauto_upper_iospc - 1) & 0xffff0000) >> 16);
+}
+
+static void __init
+pciauto_postscan_setup_bridge(struct pci_dev *dev, int current_bus, int sub_bus,
+			      int *iosave, int *memsave)
+{
+	int cmdstat;
+
+	/* Configure bus number registers */
+	pci_write_config_byte(dev, PCI_SUBORDINATE_BUS,	sub_bus);
+
+	/*
+	 * Round memory allocator to 1MB boundary.
+	 * If no space used, allocate minimum.
+	 */
+	pciauto_upper_memspc &= ~(0x100000 - 1);
+	if (*memsave == pciauto_upper_memspc)
+		pciauto_upper_memspc -= 0x00100000;
+
+	pci_write_config_word(dev, PCI_MEMORY_BASE, pciauto_upper_memspc >> 16);
+
+	/* Allocate 1MB for pre-fretch */
+	pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT,
+			      ((pciauto_upper_memspc - 1) & 0xfff00000) >> 16);
+
+	pciauto_upper_memspc -= 0x100000;
+
+	pci_write_config_word(dev, PCI_PREF_MEMORY_BASE,
+			      pciauto_upper_memspc >> 16);
+
+	/* Round I/O allocator to 4KB boundary */
+	pciauto_upper_iospc &= ~(0x1000 - 1);
+	if (*iosave == pciauto_upper_iospc)
+		pciauto_upper_iospc -= 0x1000;
+
+	pci_write_config_byte(dev, PCI_IO_BASE,
+			      (pciauto_upper_iospc & 0x0000f000) >> 8);
+	pci_write_config_word(dev, PCI_IO_BASE_UPPER16,
+			      pciauto_upper_iospc >> 16);
+
+	/* Enable memory and I/O accesses, enable bus master */
+	pci_read_config_dword(dev, PCI_COMMAND, &cmdstat);
+	pci_write_config_dword(dev, PCI_COMMAND,
+			       cmdstat |
+			       PCI_COMMAND_IO |
+			       PCI_COMMAND_MEMORY |
+			       PCI_COMMAND_MASTER);
+}
+
+/*
+ * Scan the current PCI bus.
+ */
+
+
+int __init pciauto_bus_scan(struct pci_controller *pci_ctrl, int current_bus)
+{
+	int sub_bus, pci_devfn, pci_class, cmdstat, found_multi=0;
+	unsigned short vid;
+	unsigned char header_type;
+	struct pci_dev *dev = &pciauto_dev;
+
+        pciauto_dev.bus = &pciauto_bus;
+        pciauto_dev.sysdata = pci_ctrl;
+	pciauto_bus.ops = pci_ctrl->ops;
+
+	/*
+	 * Fetch our I/O and memory space upper boundaries used
+	 * to allocated base addresses on this pci_controller.
+	 */
+
+	if (current_bus == pci_ctrl->first_busno)
+	{
+		pciauto_upper_iospc = pci_ctrl->io_resource.end + 1;
+		pciauto_upper_memspc = pci_ctrl->mem_resources[0].end + 1;
+	}
+
+	sub_bus = current_bus;
+
+	for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++)
+	{
+		/* Skip our host bridge */
+		if ((current_bus == pci_ctrl->first_busno) && (pci_devfn == 0))
+			continue;
+
+		if (PCI_FUNC(pci_devfn) && !found_multi)
+			continue;
+
+		pciauto_bus.number = current_bus;
+		pciauto_dev.devfn = pci_devfn;
+
+		/* If config space read fails from this device, move on */
+		if (pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type))
+			continue;
+
+		if (!PCI_FUNC(pci_devfn))
+			found_multi = header_type & 0x80;
+		pci_read_config_word(dev, PCI_VENDOR_ID, &vid);
+
+		if (vid == 0xffff || vid == 0x0000) {
+			found_multi = 0;
+			continue;
+		}
+
+		pci_read_config_dword(dev, PCI_CLASS_REVISION, &pci_class);
+
+		if ((pci_class >> 16) == PCI_CLASS_BRIDGE_PCI) {
+
+			int iosave, memsave;
+
+			DBG("PCI Autoconfig: Found P2P bridge, device %d\n",
+			    PCI_SLOT(pci_devfn));
+
+			/* Allocate PCI I/O and/or memory space */
+			pciauto_setup_bars(dev, PCI_BASE_ADDRESS_1);
+
+			pciauto_prescan_setup_bridge(dev, current_bus, sub_bus,
+					&iosave, &memsave);
+			sub_bus = pciauto_bus_scan(pci_ctrl, sub_bus+1);
+			pciauto_postscan_setup_bridge(dev, current_bus, sub_bus,
+					&iosave, &memsave);
+			pciauto_bus.number = current_bus;
+
+			continue;
+
+		}
+
+
+#if 0
+		/* Skip legacy mode IDE controller */
+
+		if ((pci_class >> 16) == PCI_CLASS_STORAGE_IDE) {
+
+			unsigned char prg_iface;
+			pci_read_config_byte(dev, PCI_CLASS_PROG, &prg_iface);
+
+			if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
+				DBG("PCI Autoconfig: Skipping legacy mode "
+				    "IDE controller\n");
+				continue;
+			}
+		}
+#endif
+
+		/*
+		 * Found a peripheral, enable some standard
+		 * settings
+		 */
+
+		pci_read_config_dword(dev, PCI_COMMAND,	&cmdstat);
+		pci_write_config_dword(dev, PCI_COMMAND,
+				cmdstat |
+					PCI_COMMAND_IO |
+					PCI_COMMAND_MEMORY |
+					PCI_COMMAND_MASTER);
+		pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x80);
+
+		/* Allocate PCI I/O and/or memory space */
+		DBG("PCI Autoconfig: Found Bus %d, Device %d, Function %d\n",
+		    current_bus, PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn) );
+
+		pciauto_setup_bars(dev, PCI_BASE_ADDRESS_5);
+		pciauto_setup_irq(pci_ctrl, dev, pci_devfn);
+	}
+	return sub_bus;
+}
+
+
+
+
+
diff --git a/arch/xtensa/lib/strncpy_user.S b/arch/xtensa/lib/strncpy_user.S
new file mode 100644
index 00000000..9f603cda
--- /dev/null
+++ b/arch/xtensa/lib/strncpy_user.S
@@ -0,0 +1,225 @@
+/*
+ *  arch/xtensa/lib/strncpy_user.S
+ *
+ *  This file is subject to the terms and conditions of the GNU General
+ *  Public License.  See the file "COPYING" in the main directory of
+ *  this archive for more details.
+ *
+ *  Returns: -EFAULT if exception before terminator, N if the entire
+ *  buffer filled, else strlen.
+ *
+ *  Copyright (C) 2002 Tensilica Inc.
+ */
+
+#include <variant/core.h>
+#include <linux/errno.h>
+
+/* Load or store instructions that may cause exceptions use the EX macro. */
+
+#define EX(insn,reg1,reg2,offset,handler)	\
+9:	insn	reg1, reg2, offset;		\
+	.section __ex_table, "a";		\
+	.word	9b, handler;			\
+	.previous
+
+/*
+ * char *__strncpy_user(char *dst, const char *src, size_t len)
+ */
+
+#ifdef __XTENSA_EB__
+# define MASK0 0xff000000
+# define MASK1 0x00ff0000
+# define MASK2 0x0000ff00
+# define MASK3 0x000000ff
+#else
+# define MASK0 0x000000ff
+# define MASK1 0x0000ff00
+# define MASK2 0x00ff0000
+# define MASK3 0xff000000
+#endif
+
+# Register use
+#   a0/ return address
+#   a1/ stack pointer
+#   a2/ return value
+#   a3/ src
+#   a4/ len
+#   a5/ mask0
+#   a6/ mask1
+#   a7/ mask2
+#   a8/ mask3
+#   a9/ tmp
+#   a10/ tmp
+#   a11/ dst
+#   a12/ tmp
+
+.text
+.align	4
+.global	__strncpy_user
+.type	__strncpy_user,@function
+__strncpy_user:
+	entry	sp, 16		# minimal stack frame
+	# a2/ dst, a3/ src, a4/ len
+	mov	a11, a2		# leave dst in return value register
+	beqz	a4, .Lret	# if len is zero
+	movi	a5, MASK0	# mask for byte 0
+	movi	a6, MASK1	# mask for byte 1
+	movi	a7, MASK2	# mask for byte 2
+	movi	a8, MASK3	# mask for byte 3
+	bbsi.l	a3, 0, .Lsrc1mod2 # if only  8-bit aligned
+	bbsi.l	a3, 1, .Lsrc2mod4 # if only 16-bit aligned
+.Lsrcaligned:	# return here when src is word-aligned
+	srli	a12, a4, 2	# number of loop iterations with 4B per loop
+	movi	a9, 3
+	bnone	a11, a9, .Laligned
+	j	.Ldstunaligned
+
+.Lsrc1mod2:	# src address is odd
+	EX(l8ui, a9, a3, 0, fixup_l)	# get byte 0
+	addi	a3, a3, 1		# advance src pointer
+	EX(s8i, a9, a11, 0, fixup_s)	# store byte 0
+	beqz	a9, .Lret		# if byte 0 is zero
+	addi	a11, a11, 1		# advance dst pointer
+	addi	a4, a4, -1		# decrement len
+	beqz	a4, .Lret		# if len is zero
+	bbci.l	a3, 1, .Lsrcaligned	# if src is now word-aligned
+
+.Lsrc2mod4:	# src address is 2 mod 4
+	EX(l8ui, a9, a3, 0, fixup_l)	# get byte 0
+	/* 1-cycle interlock */
+	EX(s8i, a9, a11, 0, fixup_s)	# store byte 0
+	beqz	a9, .Lret		# if byte 0 is zero
+	addi	a11, a11, 1		# advance dst pointer
+	addi	a4, a4, -1		# decrement len
+	beqz	a4, .Lret		# if len is zero
+	EX(l8ui, a9, a3, 1, fixup_l)	# get byte 0
+	addi	a3, a3, 2		# advance src pointer
+	EX(s8i, a9, a11, 0, fixup_s)	# store byte 0
+	beqz	a9, .Lret		# if byte 0 is zero
+	addi	a11, a11, 1		# advance dst pointer
+	addi	a4, a4, -1		# decrement len
+	bnez	a4, .Lsrcaligned	# if len is nonzero
+.Lret:
+	sub	a2, a11, a2		# compute strlen
+	retw
+
+/*
+ * dst is word-aligned, src is word-aligned
+ */
+	.align	4		# 1 mod 4 alignment for LOOPNEZ
+	.byte	0		# (0 mod 4 alignment for LBEG)
+.Laligned:
+#if XCHAL_HAVE_LOOPS
+	loopnez	a12, .Loop1done
+#else
+	beqz	a12, .Loop1done
+	slli	a12, a12, 2
+	add	a12, a12, a11	# a12 = end of last 4B chunck
+#endif
+.Loop1:
+	EX(l32i, a9, a3, 0, fixup_l)	# get word from src
+	addi	a3, a3, 4		# advance src pointer
+	bnone	a9, a5, .Lz0		# if byte 0 is zero
+	bnone	a9, a6, .Lz1		# if byte 1 is zero
+	bnone	a9, a7, .Lz2		# if byte 2 is zero
+	EX(s32i, a9, a11, 0, fixup_s)	# store word to dst
+	bnone	a9, a8, .Lz3		# if byte 3 is zero
+	addi	a11, a11, 4		# advance dst pointer
+#if !XCHAL_HAVE_LOOPS
+	blt	a11, a12, .Loop1
+#endif
+
+.Loop1done:
+	bbci.l	a4, 1, .L100
+	# copy 2 bytes
+	EX(l16ui, a9, a3, 0, fixup_l)
+	addi	a3, a3, 2		# advance src pointer
+#ifdef __XTENSA_EB__
+	bnone	a9, a7, .Lz0		# if byte 2 is zero
+	bnone	a9, a8, .Lz1		# if byte 3 is zero
+#else
+	bnone	a9, a5, .Lz0		# if byte 0 is zero
+	bnone	a9, a6, .Lz1		# if byte 1 is zero
+#endif
+	EX(s16i, a9, a11, 0, fixup_s)
+	addi	a11, a11, 2		# advance dst pointer
+.L100:
+	bbci.l	a4, 0, .Lret
+	EX(l8ui, a9, a3, 0, fixup_l)
+	/* slot */
+	EX(s8i, a9, a11, 0, fixup_s)
+	beqz	a9, .Lret		# if byte is zero
+	addi	a11, a11, 1-3		# advance dst ptr 1, but also cancel
+					# the effect of adding 3 in .Lz3 code
+	/* fall thru to .Lz3 and "retw" */
+
+.Lz3:	# byte 3 is zero
+	addi	a11, a11, 3		# advance dst pointer
+	sub	a2, a11, a2		# compute strlen
+	retw
+.Lz0:	# byte 0 is zero
+#ifdef __XTENSA_EB__
+	movi	a9, 0
+#endif /* __XTENSA_EB__ */
+	EX(s8i, a9, a11, 0, fixup_s)
+	sub	a2, a11, a2		# compute strlen
+	retw
+.Lz1:	# byte 1 is zero
+#ifdef __XTENSA_EB__
+        extui   a9, a9, 16, 16
+#endif /* __XTENSA_EB__ */
+	EX(s16i, a9, a11, 0, fixup_s)
+	addi	a11, a11, 1		# advance dst pointer
+	sub	a2, a11, a2		# compute strlen
+	retw
+.Lz2:	# byte 2 is zero
+#ifdef __XTENSA_EB__
+        extui   a9, a9, 16, 16
+#endif /* __XTENSA_EB__ */
+	EX(s16i, a9, a11, 0, fixup_s)
+	movi	a9, 0
+	EX(s8i, a9, a11, 2, fixup_s)
+	addi	a11, a11, 2		# advance dst pointer
+	sub	a2, a11, a2		# compute strlen
+	retw
+
+	.align	4		# 1 mod 4 alignment for LOOPNEZ
+	.byte	0		# (0 mod 4 alignment for LBEG)
+.Ldstunaligned:
+/*
+ * for now just use byte copy loop
+ */
+#if XCHAL_HAVE_LOOPS
+	loopnez	a4, .Lunalignedend
+#else
+	beqz	a4, .Lunalignedend
+	add	a12, a11, a4		# a12 = ending address
+#endif /* XCHAL_HAVE_LOOPS */
+.Lnextbyte:
+	EX(l8ui, a9, a3, 0, fixup_l)
+	addi	a3, a3, 1
+	EX(s8i, a9, a11, 0, fixup_s)
+	beqz	a9, .Lunalignedend
+	addi	a11, a11, 1
+#if !XCHAL_HAVE_LOOPS
+	blt	a11, a12, .Lnextbyte
+#endif
+
+.Lunalignedend:
+	sub	a2, a11, a2		# compute strlen
+	retw
+
+
+	.section .fixup, "ax"
+	.align	4
+
+	/* For now, just return -EFAULT.  Future implementations might
+	 * like to clear remaining kernel space, like the fixup
+	 * implementation in memset().  Thus, we differentiate between
+	 * load/store fixups. */
+
+fixup_s:
+fixup_l:
+	movi	a2, -EFAULT
+	retw
+
diff --git a/arch/xtensa/lib/strnlen_user.S b/arch/xtensa/lib/strnlen_user.S
new file mode 100644
index 00000000..23f2a898
--- /dev/null
+++ b/arch/xtensa/lib/strnlen_user.S
@@ -0,0 +1,148 @@
+/*
+ *  arch/xtensa/lib/strnlen_user.S
+ *
+ *  This file is subject to the terms and conditions of the GNU General
+ *  Public License.  See the file "COPYING" in the main directory of
+ *  this archive for more details.
+ *
+ *  Returns strnlen, including trailing zero terminator.
+ *  Zero indicates error.
+ *
+ *  Copyright (C) 2002 Tensilica Inc.
+ */
+
+#include <variant/core.h>
+
+/* Load or store instructions that may cause exceptions use the EX macro. */
+
+#define EX(insn,reg1,reg2,offset,handler)	\
+9:	insn	reg1, reg2, offset;		\
+	.section __ex_table, "a";		\
+	.word	9b, handler;			\
+	.previous
+
+/*
+ * size_t __strnlen_user(const char *s, size_t len)
+ */
+
+#ifdef __XTENSA_EB__
+# define MASK0 0xff000000
+# define MASK1 0x00ff0000
+# define MASK2 0x0000ff00
+# define MASK3 0x000000ff
+#else
+# define MASK0 0x000000ff
+# define MASK1 0x0000ff00
+# define MASK2 0x00ff0000
+# define MASK3 0xff000000
+#endif
+
+# Register use:
+#   a2/ src
+#   a3/ len
+#   a4/ tmp
+#   a5/ mask0
+#   a6/ mask1
+#   a7/ mask2
+#   a8/ mask3
+#   a9/ tmp
+#   a10/ tmp
+
+.text
+.align	4
+.global	__strnlen_user
+.type	__strnlen_user,@function
+__strnlen_user:
+	entry	sp, 16		# minimal stack frame
+	# a2/ s, a3/ len
+	addi	a4, a2, -4	# because we overincrement at the end;
+				# we compensate with load offsets of 4
+	movi	a5, MASK0	# mask for byte 0
+	movi	a6, MASK1	# mask for byte 1
+	movi	a7, MASK2	# mask for byte 2
+	movi	a8, MASK3	# mask for byte 3
+	bbsi.l	a2, 0, .L1mod2	# if only  8-bit aligned
+	bbsi.l	a2, 1, .L2mod4	# if only 16-bit aligned
+
+/*
+ * String is word-aligned.
+ */
+.Laligned:
+	srli	a10, a3, 2	# number of loop iterations with 4B per loop
+#if XCHAL_HAVE_LOOPS
+	loopnez	a10, .Ldone
+#else
+	beqz	a10, .Ldone
+	slli	a10, a10, 2
+	add	a10, a10, a4	# a10 = end of last 4B chunk
+#endif /* XCHAL_HAVE_LOOPS */
+.Loop:
+	EX(l32i, a9, a4, 4, lenfixup)	# get next word of string
+	addi	a4, a4, 4		# advance string pointer
+	bnone	a9, a5, .Lz0		# if byte 0 is zero
+	bnone	a9, a6, .Lz1		# if byte 1 is zero
+	bnone	a9, a7, .Lz2		# if byte 2 is zero
+	bnone	a9, a8, .Lz3		# if byte 3 is zero
+#if !XCHAL_HAVE_LOOPS
+	blt	a4, a10, .Loop
+#endif
+
+.Ldone:
+	EX(l32i, a9, a4, 4, lenfixup)	# load 4 bytes for remaining checks
+
+	bbci.l	a3, 1, .L100
+	# check two more bytes (bytes 0, 1 of word)
+	addi	a4, a4, 2	# advance string pointer
+	bnone	a9, a5, .Lz0	# if byte 0 is zero
+	bnone	a9, a6, .Lz1	# if byte 1 is zero
+.L100:
+	bbci.l	a3, 0, .L101
+	# check one more byte (byte 2 of word)
+	# Actually, we don't need to check.  Zero or nonzero, we'll add one.
+	# Do not add an extra one for the NULL terminator since we have
+	#  exhausted the original len parameter.
+	addi	a4, a4, 1	# advance string pointer
+.L101:
+	sub	a2, a4, a2	# compute length
+	retw
+
+# NOTE that in several places below, we point to the byte just after
+# the zero byte in order to include the NULL terminator in the count.
+
+.Lz3:	# byte 3 is zero
+	addi	a4, a4, 3	# point to zero byte
+.Lz0:	# byte 0 is zero
+	addi	a4, a4, 1	# point just beyond zero byte
+	sub	a2, a4, a2	# subtract to get length
+	retw
+.Lz1:	# byte 1 is zero
+	addi	a4, a4, 1+1	# point just beyond zero byte
+	sub	a2, a4, a2	# subtract to get length
+	retw
+.Lz2:	# byte 2 is zero
+	addi	a4, a4, 2+1	# point just beyond zero byte
+	sub	a2, a4, a2	# subtract to get length
+	retw
+
+.L1mod2:	# address is odd
+	EX(l8ui, a9, a4, 4, lenfixup)	# get byte 0
+	addi	a4, a4, 1		# advance string pointer
+	beqz	a9, .Lz3		# if byte 0 is zero
+	bbci.l	a4, 1, .Laligned	# if string pointer is now word-aligned
+
+.L2mod4:	# address is 2 mod 4
+	addi	a4, a4, 2	# advance ptr for aligned access
+	EX(l32i, a9, a4, 0, lenfixup)	# get word with first two bytes of string
+	bnone	a9, a7, .Lz2	# if byte 2 (of word, not string) is zero
+	bany	a9, a8, .Laligned # if byte 3 (of word, not string) is nonzero
+	# byte 3 is zero
+	addi	a4, a4, 3+1	# point just beyond zero byte
+	sub	a2, a4, a2	# subtract to get length
+	retw
+
+	.section .fixup, "ax"
+	.align	4
+lenfixup:
+	movi	a2, 0
+	retw
+
diff --git a/arch/xtensa/lib/usercopy.S b/arch/xtensa/lib/usercopy.S
new file mode 100644
index 00000000..46d60314
--- /dev/null
+++ b/arch/xtensa/lib/usercopy.S
@@ -0,0 +1,321 @@
+/*
+ *  arch/xtensa/lib/usercopy.S
+ *
+ *  Copy to/from user space (derived from arch/xtensa/lib/hal/memcopy.S)
+ *
+ *  DO NOT COMBINE this function with <arch/xtensa/lib/hal/memcopy.S>.
+ *  It needs to remain separate and distinct.  The hal files are part
+ *  of the Xtensa link-time HAL, and those files may differ per
+ *  processor configuration.  Patching the kernel for another
+ *  processor configuration includes replacing the hal files, and we
+ *  could lose the special functionality for accessing user-space
+ *  memory during such a patch.  We sacrifice a little code space here
+ *  in favor to simplify code maintenance.
+ *
+ *  This file is subject to the terms and conditions of the GNU General
+ *  Public License.  See the file "COPYING" in the main directory of
+ *  this archive for more details.
+ *
+ *  Copyright (C) 2002 Tensilica Inc.
+ */
+
+
+/*
+ * size_t __xtensa_copy_user (void *dst, const void *src, size_t len);
+ *
+ * The returned value is the number of bytes not copied.  Implies zero
+ * is success.
+ *
+ * The general case algorithm is as follows:
+ *   If the destination and source are both aligned,
+ *     do 16B chunks with a loop, and then finish up with
+ *     8B, 4B, 2B, and 1B copies conditional on the length.
+ *   If destination is aligned and source unaligned,
+ *     do the same, but use SRC to align the source data.
+ *   If destination is unaligned, align it by conditionally
+ *     copying 1B and 2B and then retest.
+ *   This code tries to use fall-through braches for the common
+ *     case of aligned destinations (except for the branches to
+ *     the alignment label).
+ *
+ * Register use:
+ *	a0/ return address
+ *	a1/ stack pointer
+ *	a2/ return value
+ *	a3/ src
+ *	a4/ length
+ *	a5/ dst
+ *	a6/ tmp
+ *	a7/ tmp
+ *	a8/ tmp
+ *	a9/ tmp
+ *	a10/ tmp
+ *	a11/ original length
+ */
+
+#include <variant/core.h>
+
+#ifdef __XTENSA_EB__
+#define ALIGN(R, W0, W1) src	R, W0, W1
+#define SSA8(R)	ssa8b R
+#else
+#define ALIGN(R, W0, W1) src	R, W1, W0
+#define SSA8(R)	ssa8l R
+#endif
+
+/* Load or store instructions that may cause exceptions use the EX macro. */
+
+#define EX(insn,reg1,reg2,offset,handler)	\
+9:	insn	reg1, reg2, offset;		\
+	.section __ex_table, "a";		\
+	.word	9b, handler;			\
+	.previous
+
+
+	.text
+	.align	4
+	.global	__xtensa_copy_user
+	.type	__xtensa_copy_user,@function
+__xtensa_copy_user:
+	entry	sp, 16		# minimal stack frame
+	# a2/ dst, a3/ src, a4/ len
+	mov	a5, a2		# copy dst so that a2 is return value
+	mov	a11, a4		# preserve original len for error case
+.Lcommon:
+	bbsi.l	a2, 0, .Ldst1mod2 # if dst is 1 mod 2
+	bbsi.l	a2, 1, .Ldst2mod4 # if dst is 2 mod 4
+.Ldstaligned:	# return here from .Ldstunaligned when dst is aligned
+	srli	a7, a4, 4	# number of loop iterations with 16B
+				# per iteration
+	movi	a8, 3		  # if source is also aligned,
+	bnone	a3, a8, .Laligned # then use word copy
+	SSA8(	a3)		# set shift amount from byte offset
+	bnez	a4, .Lsrcunaligned
+	movi	a2, 0		# return success for len==0
+	retw
+
+/*
+ * Destination is unaligned
+ */
+
+.Ldst1mod2:	# dst is only byte aligned
+	bltui	a4, 7, .Lbytecopy	# do short copies byte by byte
+
+	# copy 1 byte
+	EX(l8ui, a6, a3, 0, l_fixup)
+	addi	a3, a3,  1
+	EX(s8i, a6, a5,  0, s_fixup)
+	addi	a5, a5,  1
+	addi	a4, a4, -1
+	bbci.l	a5, 1, .Ldstaligned	# if dst is now aligned, then
+					# return to main algorithm
+.Ldst2mod4:	# dst 16-bit aligned
+	# copy 2 bytes
+	bltui	a4, 6, .Lbytecopy	# do short copies byte by byte
+	EX(l8ui, a6, a3, 0, l_fixup)
+	EX(l8ui, a7, a3, 1, l_fixup)
+	addi	a3, a3,  2
+	EX(s8i, a6, a5,  0, s_fixup)
+	EX(s8i, a7, a5,  1, s_fixup)
+	addi	a5, a5,  2
+	addi	a4, a4, -2
+	j	.Ldstaligned	# dst is now aligned, return to main algorithm
+
+/*
+ * Byte by byte copy
+ */
+	.align	4
+	.byte	0		# 1 mod 4 alignment for LOOPNEZ
+				# (0 mod 4 alignment for LBEG)
+.Lbytecopy:
+#if XCHAL_HAVE_LOOPS
+	loopnez	a4, .Lbytecopydone
+#else /* !XCHAL_HAVE_LOOPS */
+	beqz	a4, .Lbytecopydone
+	add	a7, a3, a4	# a7 = end address for source
+#endif /* !XCHAL_HAVE_LOOPS */
+.Lnextbyte:
+	EX(l8ui, a6, a3, 0, l_fixup)
+	addi	a3, a3, 1
+	EX(s8i, a6, a5, 0, s_fixup)
+	addi	a5, a5, 1
+#if !XCHAL_HAVE_LOOPS
+	blt	a3, a7, .Lnextbyte
+#endif /* !XCHAL_HAVE_LOOPS */
+.Lbytecopydone:
+	movi	a2, 0		# return success for len bytes copied
+	retw
+
+/*
+ * Destination and source are word-aligned.
+ */
+	# copy 16 bytes per iteration for word-aligned dst and word-aligned src
+	.align	4		# 1 mod 4 alignment for LOOPNEZ
+	.byte	0		# (0 mod 4 alignment for LBEG)
+.Laligned:
+#if XCHAL_HAVE_LOOPS
+	loopnez	a7, .Loop1done
+#else /* !XCHAL_HAVE_LOOPS */
+	beqz	a7, .Loop1done
+	slli	a8, a7, 4
+	add	a8, a8, a3	# a8 = end of last 16B source chunk
+#endif /* !XCHAL_HAVE_LOOPS */
+.Loop1:
+	EX(l32i, a6, a3,  0, l_fixup)
+	EX(l32i, a7, a3,  4, l_fixup)
+	EX(s32i, a6, a5,  0, s_fixup)
+	EX(l32i, a6, a3,  8, l_fixup)
+	EX(s32i, a7, a5,  4, s_fixup)
+	EX(l32i, a7, a3, 12, l_fixup)
+	EX(s32i, a6, a5,  8, s_fixup)
+	addi	a3, a3, 16
+	EX(s32i, a7, a5, 12, s_fixup)
+	addi	a5, a5, 16
+#if !XCHAL_HAVE_LOOPS
+	blt	a3, a8, .Loop1
+#endif /* !XCHAL_HAVE_LOOPS */
+.Loop1done:
+	bbci.l	a4, 3, .L2
+	# copy 8 bytes
+	EX(l32i, a6, a3,  0, l_fixup)
+	EX(l32i, a7, a3,  4, l_fixup)
+	addi	a3, a3,  8
+	EX(s32i, a6, a5,  0, s_fixup)
+	EX(s32i, a7, a5,  4, s_fixup)
+	addi	a5, a5,  8
+.L2:
+	bbci.l	a4, 2, .L3
+	# copy 4 bytes
+	EX(l32i, a6, a3,  0, l_fixup)
+	addi	a3, a3,  4
+	EX(s32i, a6, a5,  0, s_fixup)
+	addi	a5, a5,  4
+.L3:
+	bbci.l	a4, 1, .L4
+	# copy 2 bytes
+	EX(l16ui, a6, a3,  0, l_fixup)
+	addi	a3, a3,  2
+	EX(s16i,  a6, a5,  0, s_fixup)
+	addi	a5, a5,  2
+.L4:
+	bbci.l	a4, 0, .L5
+	# copy 1 byte
+	EX(l8ui, a6, a3,  0, l_fixup)
+	EX(s8i,  a6, a5,  0, s_fixup)
+.L5:
+	movi	a2, 0		# return success for len bytes copied
+	retw
+
+/*
+ * Destination is aligned, Source is unaligned
+ */
+
+	.align	4
+	.byte	0		# 1 mod 4 alignement for LOOPNEZ
+				# (0 mod 4 alignment for LBEG)
+.Lsrcunaligned:
+	# copy 16 bytes per iteration for word-aligned dst and unaligned src
+	and	a10, a3, a8	# save unalignment offset for below
+	sub	a3, a3, a10	# align a3 (to avoid sim warnings only; not needed for hardware)
+	EX(l32i, a6, a3, 0, l_fixup)	# load first word
+#if XCHAL_HAVE_LOOPS
+	loopnez	a7, .Loop2done
+#else /* !XCHAL_HAVE_LOOPS */
+	beqz	a7, .Loop2done
+	slli	a10, a7, 4
+	add	a10, a10, a3	# a10 = end of last 16B source chunk
+#endif /* !XCHAL_HAVE_LOOPS */
+.Loop2:
+	EX(l32i, a7, a3,  4, l_fixup)
+	EX(l32i, a8, a3,  8, l_fixup)
+	ALIGN(	a6, a6, a7)
+	EX(s32i, a6, a5,  0, s_fixup)
+	EX(l32i, a9, a3, 12, l_fixup)
+	ALIGN(	a7, a7, a8)
+	EX(s32i, a7, a5,  4, s_fixup)
+	EX(l32i, a6, a3, 16, l_fixup)
+	ALIGN(	a8, a8, a9)
+	EX(s32i, a8, a5,  8, s_fixup)
+	addi	a3, a3, 16
+	ALIGN(	a9, a9, a6)
+	EX(s32i, a9, a5, 12, s_fixup)
+	addi	a5, a5, 16
+#if !XCHAL_HAVE_LOOPS
+	blt	a3, a10, .Loop2
+#endif /* !XCHAL_HAVE_LOOPS */
+.Loop2done:
+	bbci.l	a4, 3, .L12
+	# copy 8 bytes
+	EX(l32i, a7, a3,  4, l_fixup)
+	EX(l32i, a8, a3,  8, l_fixup)
+	ALIGN(	a6, a6, a7)
+	EX(s32i, a6, a5,  0, s_fixup)
+	addi	a3, a3,  8
+	ALIGN(	a7, a7, a8)
+	EX(s32i, a7, a5,  4, s_fixup)
+	addi	a5, a5,  8
+	mov	a6, a8
+.L12:
+	bbci.l	a4, 2, .L13
+	# copy 4 bytes
+	EX(l32i, a7, a3,  4, l_fixup)
+	addi	a3, a3,  4
+	ALIGN(	a6, a6, a7)
+	EX(s32i, a6, a5,  0, s_fixup)
+	addi	a5, a5,  4
+	mov	a6, a7
+.L13:
+	add	a3, a3, a10	# readjust a3 with correct misalignment
+	bbci.l	a4, 1, .L14
+	# copy 2 bytes
+	EX(l8ui, a6, a3,  0, l_fixup)
+	EX(l8ui, a7, a3,  1, l_fixup)
+	addi	a3, a3,  2
+	EX(s8i, a6, a5,  0, s_fixup)
+	EX(s8i, a7, a5,  1, s_fixup)
+	addi	a5, a5,  2
+.L14:
+	bbci.l	a4, 0, .L15
+	# copy 1 byte
+	EX(l8ui, a6, a3,  0, l_fixup)
+	EX(s8i,  a6, a5,  0, s_fixup)
+.L15:
+	movi	a2, 0		# return success for len bytes copied
+	retw
+
+
+	.section .fixup, "ax"
+	.align	4
+
+/* a2 = original dst; a5 = current dst; a11= original len
+ * bytes_copied = a5 - a2
+ * retval = bytes_not_copied = original len - bytes_copied
+ * retval = a11 - (a5 - a2)
+ *
+ * Clearing the remaining pieces of kernel memory plugs security
+ * holes.  This functionality is the equivalent of the *_zeroing
+ * functions that some architectures provide.
+ */
+
+.Lmemset:
+	.word	memset
+
+s_fixup:
+	sub	a2, a5, a2	/* a2 <-- bytes copied */
+	sub	a2, a11, a2	/* a2 <-- bytes not copied */
+	retw
+
+l_fixup:
+	sub	a2, a5, a2	/* a2 <-- bytes copied */
+	sub	a2, a11, a2	/* a2 <-- bytes not copied == return value */
+
+	/* void *memset(void *s, int c, size_t n); */
+	mov	a6, a5		/* s */
+	movi	a7, 0		/* c */
+	mov	a8, a2		/* n */
+	l32r	a4, .Lmemset
+	callx4	a4
+	/* Ignore memset return value in a6. */
+	/* a2 still contains bytes not copied. */
+	retw
+
diff --git a/arch/xtensa/mm/Makefile b/arch/xtensa/mm/Makefile
new file mode 100644
index 00000000..f0b646d2
--- /dev/null
+++ b/arch/xtensa/mm/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Linux/Xtensa-specific parts of the memory manager.
+#
+
+obj-y			:= init.o cache.o misc.o
+obj-$(CONFIG_MMU)	+= fault.o mmu.o tlb.o
diff --git a/arch/xtensa/mm/cache.c b/arch/xtensa/mm/cache.c
new file mode 100644
index 00000000..85df4655
--- /dev/null
+++ b/arch/xtensa/mm/cache.c
@@ -0,0 +1,255 @@
+/*
+ * arch/xtensa/mm/cache.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001-2006 Tensilica Inc.
+ *
+ * Chris Zankel	<chris@zankel.net>
+ * Joe Taylor
+ * Marc Gauthier
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/bootmem.h>
+#include <linux/swap.h>
+#include <linux/pagemap.h>
+
+#include <asm/bootparam.h>
+#include <asm/mmu_context.h>
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+
+//#define printd(x...) printk(x)
+#define printd(x...) do { } while(0)
+
+/* 
+ * Note:
+ * The kernel provides one architecture bit PG_arch_1 in the page flags that 
+ * can be used for cache coherency.
+ *
+ * I$-D$ coherency.
+ *
+ * The Xtensa architecture doesn't keep the instruction cache coherent with
+ * the data cache. We use the architecture bit to indicate if the caches
+ * are coherent. The kernel clears this bit whenever a page is added to the
+ * page cache. At that time, the caches might not be in sync. We, therefore,
+ * define this flag as 'clean' if set.
+ *
+ * D-cache aliasing.
+ *
+ * With cache aliasing, we have to always flush the cache when pages are
+ * unmapped (see tlb_start_vma(). So, we use this flag to indicate a dirty
+ * page.
+ * 
+ *
+ *
+ */
+
+#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK
+
+/*
+ * Any time the kernel writes to a user page cache page, or it is about to
+ * read from a page cache page this routine is called.
+ *
+ */
+
+void flush_dcache_page(struct page *page)
+{
+	struct address_space *mapping = page_mapping(page);
+
+	/*
+	 * If we have a mapping but the page is not mapped to user-space
+	 * yet, we simply mark this page dirty and defer flushing the 
+	 * caches until update_mmu().
+	 */
+
+	if (mapping && !mapping_mapped(mapping)) {
+		if (!test_bit(PG_arch_1, &page->flags))
+			set_bit(PG_arch_1, &page->flags);
+		return;
+
+	} else {
+
+		unsigned long phys = page_to_phys(page);
+		unsigned long temp = page->index << PAGE_SHIFT;
+		unsigned long alias = !(DCACHE_ALIAS_EQ(temp, phys));
+		unsigned long virt;
+
+		/* 
+		 * Flush the page in kernel space and user space.
+		 * Note that we can omit that step if aliasing is not
+		 * an issue, but we do have to synchronize I$ and D$
+		 * if we have a mapping.
+		 */
+
+		if (!alias && !mapping)
+			return;
+
+		__flush_invalidate_dcache_page((long)page_address(page));
+
+		virt = TLBTEMP_BASE_1 + (temp & DCACHE_ALIAS_MASK);
+
+		if (alias)
+			__flush_invalidate_dcache_page_alias(virt, phys);
+
+		if (mapping)
+			__invalidate_icache_page_alias(virt, phys);
+	}
+
+	/* There shouldn't be an entry in the cache for this page anymore. */
+}
+
+
+/*
+ * For now, flush the whole cache. FIXME??
+ */
+
+void flush_cache_range(struct vm_area_struct* vma, 
+		       unsigned long start, unsigned long end)
+{
+	__flush_invalidate_dcache_all();
+	__invalidate_icache_all();
+}
+
+/* 
+ * Remove any entry in the cache for this page. 
+ *
+ * Note that this function is only called for user pages, so use the
+ * alias versions of the cache flush functions.
+ */
+
+void flush_cache_page(struct vm_area_struct* vma, unsigned long address,
+    		      unsigned long pfn)
+{
+	/* Note that we have to use the 'alias' address to avoid multi-hit */
+
+	unsigned long phys = page_to_phys(pfn_to_page(pfn));
+	unsigned long virt = TLBTEMP_BASE_1 + (address & DCACHE_ALIAS_MASK);
+
+	__flush_invalidate_dcache_page_alias(virt, phys);
+	__invalidate_icache_page_alias(virt, phys);
+}
+
+#endif
+
+void
+update_mmu_cache(struct vm_area_struct * vma, unsigned long addr, pte_t *ptep)
+{
+	unsigned long pfn = pte_pfn(*ptep);
+	struct page *page;
+
+	if (!pfn_valid(pfn))
+		return;
+
+	page = pfn_to_page(pfn);
+
+	/* Invalidate old entry in TLBs */
+
+	invalidate_itlb_mapping(addr);
+	invalidate_dtlb_mapping(addr);
+
+#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK
+
+	if (!PageReserved(page) && test_bit(PG_arch_1, &page->flags)) {
+
+		unsigned long vaddr = TLBTEMP_BASE_1 + (addr & DCACHE_ALIAS_MASK);
+		unsigned long paddr = (unsigned long) page_address(page);
+		unsigned long phys = page_to_phys(page);
+
+		__flush_invalidate_dcache_page(paddr);
+
+		__flush_invalidate_dcache_page_alias(vaddr, phys);
+		__invalidate_icache_page_alias(vaddr, phys);
+
+		clear_bit(PG_arch_1, &page->flags);
+	}
+#else
+	if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)
+	    && (vma->vm_flags & VM_EXEC) != 0) {
+	    	unsigned long paddr = (unsigned long) page_address(page);
+		__flush_dcache_page(paddr);
+		__invalidate_icache_page(paddr);
+		set_bit(PG_arch_1, &page->flags);
+	}
+#endif
+}
+
+/*
+ * access_process_vm() has called get_user_pages(), which has done a
+ * flush_dcache_page() on the page.
+ */
+
+#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK
+
+void copy_to_user_page(struct vm_area_struct *vma, struct page *page, 
+		unsigned long vaddr, void *dst, const void *src,
+		unsigned long len)
+{
+	unsigned long phys = page_to_phys(page);
+	unsigned long alias = !(DCACHE_ALIAS_EQ(vaddr, phys));
+
+	/* Flush and invalidate user page if aliased. */
+
+	if (alias) {
+		unsigned long temp = TLBTEMP_BASE_1 + (vaddr & DCACHE_ALIAS_MASK);
+		__flush_invalidate_dcache_page_alias(temp, phys);
+	}
+
+	/* Copy data */
+	
+	memcpy(dst, src, len);
+
+	/*
+	 * Flush and invalidate kernel page if aliased and synchronize 
+	 * data and instruction caches for executable pages. 
+	 */
+
+	if (alias) {
+		unsigned long temp = TLBTEMP_BASE_1 + (vaddr & DCACHE_ALIAS_MASK);
+
+		__flush_invalidate_dcache_range((unsigned long) dst, len);
+		if ((vma->vm_flags & VM_EXEC) != 0) {
+			__invalidate_icache_page_alias(temp, phys);
+		}
+
+	} else if ((vma->vm_flags & VM_EXEC) != 0) {
+		__flush_dcache_range((unsigned long)dst,len);
+		__invalidate_icache_range((unsigned long) dst, len);
+	}
+}
+
+extern void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
+		unsigned long vaddr, void *dst, const void *src,
+		unsigned long len)
+{
+	unsigned long phys = page_to_phys(page);
+	unsigned long alias = !(DCACHE_ALIAS_EQ(vaddr, phys));
+
+	/*
+	 * Flush user page if aliased. 
+	 * (Note: a simply flush would be sufficient) 
+	 */
+
+	if (alias) {
+		unsigned long temp = TLBTEMP_BASE_1 + (vaddr & DCACHE_ALIAS_MASK);
+		__flush_invalidate_dcache_page_alias(temp, phys);
+	}
+
+	memcpy(dst, src, len);
+}
+
+#endif
diff --git a/arch/xtensa/mm/fault.c b/arch/xtensa/mm/fault.c
new file mode 100644
index 00000000..e367e302
--- /dev/null
+++ b/arch/xtensa/mm/fault.c
@@ -0,0 +1,237 @@
+// TODO VM_EXEC flag work-around, cache aliasing
+/*
+ * arch/xtensa/mm/fault.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ *
+ * Chris Zankel <chris@zankel.net>
+ * Joe Taylor	<joe@tensilica.com, joetylr@yahoo.com>
+ */
+
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/hardirq.h>
+#include <asm/mmu_context.h>
+#include <asm/cacheflush.h>
+#include <asm/hardirq.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/pgalloc.h>
+
+unsigned long asid_cache = ASID_USER_FIRST;
+void bad_page_fault(struct pt_regs*, unsigned long, int);
+
+#undef DEBUG_PAGE_FAULT
+
+/*
+ * This routine handles page faults.  It determines the address,
+ * and the problem, and then passes it off to one of the appropriate
+ * routines.
+ *
+ * Note: does not handle Miss and MultiHit.
+ */
+
+void do_page_fault(struct pt_regs *regs)
+{
+	struct vm_area_struct * vma;
+	struct mm_struct *mm = current->mm;
+	unsigned int exccause = regs->exccause;
+	unsigned int address = regs->excvaddr;
+	siginfo_t info;
+
+	int is_write, is_exec;
+	int fault;
+
+	info.si_code = SEGV_MAPERR;
+
+	/* We fault-in kernel-space virtual memory on-demand. The
+	 * 'reference' page table is init_mm.pgd.
+	 */
+	if (address >= TASK_SIZE && !user_mode(regs))
+		goto vmalloc_fault;
+
+	/* If we're in an interrupt or have no user
+	 * context, we must not take the fault..
+	 */
+	if (in_atomic() || !mm) {
+		bad_page_fault(regs, address, SIGSEGV);
+		return;
+	}
+
+	is_write = (exccause == EXCCAUSE_STORE_CACHE_ATTRIBUTE) ? 1 : 0;
+	is_exec =  (exccause == EXCCAUSE_ITLB_PRIVILEGE ||
+		    exccause == EXCCAUSE_ITLB_MISS ||
+		    exccause == EXCCAUSE_FETCH_CACHE_ATTRIBUTE) ? 1 : 0;
+
+#ifdef DEBUG_PAGE_FAULT
+	printk("[%s:%d:%08x:%d:%08x:%s%s]\n", current->comm, current->pid,
+	       address, exccause, regs->pc, is_write? "w":"", is_exec? "x":"");
+#endif
+
+	down_read(&mm->mmap_sem);
+	vma = find_vma(mm, address);
+
+	if (!vma)
+		goto bad_area;
+	if (vma->vm_start <= address)
+		goto good_area;
+	if (!(vma->vm_flags & VM_GROWSDOWN))
+		goto bad_area;
+	if (expand_stack(vma, address))
+		goto bad_area;
+
+	/* Ok, we have a good vm_area for this memory access, so
+	 * we can handle it..
+	 */
+
+good_area:
+	info.si_code = SEGV_ACCERR;
+
+	if (is_write) {
+		if (!(vma->vm_flags & VM_WRITE))
+			goto bad_area;
+	} else if (is_exec) {
+		if (!(vma->vm_flags & VM_EXEC))
+			goto bad_area;
+	} else	/* Allow read even from write-only pages. */
+		if (!(vma->vm_flags & (VM_READ | VM_WRITE)))
+			goto bad_area;
+
+	/* If for any reason at all we couldn't handle the fault,
+	 * make sure we exit gracefully rather than endlessly redo
+	 * the fault.
+	 */
+	fault = handle_mm_fault(mm, vma, address, is_write ? FAULT_FLAG_WRITE : 0);
+	if (unlikely(fault & VM_FAULT_ERROR)) {
+		if (fault & VM_FAULT_OOM)
+			goto out_of_memory;
+		else if (fault & VM_FAULT_SIGBUS)
+			goto do_sigbus;
+		BUG();
+	}
+	if (fault & VM_FAULT_MAJOR)
+		current->maj_flt++;
+	else
+		current->min_flt++;
+
+	up_read(&mm->mmap_sem);
+	return;
+
+	/* Something tried to access memory that isn't in our memory map..
+	 * Fix it, but check if it's kernel or user first..
+	 */
+bad_area:
+	up_read(&mm->mmap_sem);
+	if (user_mode(regs)) {
+		current->thread.bad_vaddr = address;
+		current->thread.error_code = is_write;
+		info.si_signo = SIGSEGV;
+		info.si_errno = 0;
+		/* info.si_code has been set above */
+		info.si_addr = (void *) address;
+		force_sig_info(SIGSEGV, &info, current);
+		return;
+	}
+	bad_page_fault(regs, address, SIGSEGV);
+	return;
+
+
+	/* We ran out of memory, or some other thing happened to us that made
+	 * us unable to handle the page fault gracefully.
+	 */
+out_of_memory:
+	up_read(&mm->mmap_sem);
+	if (!user_mode(regs))
+		bad_page_fault(regs, address, SIGKILL);
+	else
+		pagefault_out_of_memory();
+	return;
+
+do_sigbus:
+	up_read(&mm->mmap_sem);
+
+	/* Send a sigbus, regardless of whether we were in kernel
+	 * or user mode.
+	 */
+	current->thread.bad_vaddr = address;
+	info.si_code = SIGBUS;
+	info.si_errno = 0;
+	info.si_code = BUS_ADRERR;
+	info.si_addr = (void *) address;
+	force_sig_info(SIGBUS, &info, current);
+
+	/* Kernel mode? Handle exceptions or die */
+	if (!user_mode(regs))
+		bad_page_fault(regs, address, SIGBUS);
+
+vmalloc_fault:
+	{
+		/* Synchronize this task's top level page-table
+		 * with the 'reference' page table.
+		 */
+		struct mm_struct *act_mm = current->active_mm;
+		int index = pgd_index(address);
+		pgd_t *pgd, *pgd_k;
+		pmd_t *pmd, *pmd_k;
+		pte_t *pte_k;
+
+		if (act_mm == NULL)
+			goto bad_page_fault;
+
+		pgd = act_mm->pgd + index;
+		pgd_k = init_mm.pgd + index;
+
+		if (!pgd_present(*pgd_k))
+			goto bad_page_fault;
+
+		pgd_val(*pgd) = pgd_val(*pgd_k);
+
+		pmd = pmd_offset(pgd, address);
+		pmd_k = pmd_offset(pgd_k, address);
+		if (!pmd_present(*pmd) || !pmd_present(*pmd_k))
+			goto bad_page_fault;
+
+		pmd_val(*pmd) = pmd_val(*pmd_k);
+		pte_k = pte_offset_kernel(pmd_k, address);
+
+		if (!pte_present(*pte_k))
+			goto bad_page_fault;
+		return;
+	}
+bad_page_fault:
+	bad_page_fault(regs, address, SIGKILL);
+	return;
+}
+
+
+void
+bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
+{
+	extern void die(const char*, struct pt_regs*, long);
+	const struct exception_table_entry *entry;
+
+	/* Are we prepared to handle this kernel fault?  */
+	if ((entry = search_exception_tables(regs->pc)) != NULL) {
+#ifdef DEBUG_PAGE_FAULT
+		printk(KERN_DEBUG "%s: Exception at pc=%#010lx (%lx)\n",
+				current->comm, regs->pc, entry->fixup);
+#endif
+		current->thread.bad_uaddr = address;
+		regs->pc = entry->fixup;
+		return;
+	}
+
+	/* Oops. The kernel tried to access some bad page. We'll have to
+	 * terminate things with extreme prejudice.
+	 */
+	printk(KERN_ALERT "Unable to handle kernel paging request at virtual "
+	       "address %08lx\n pc = %08lx, ra = %08lx\n",
+	       address, regs->pc, regs->areg[0]);
+	die("Oops", regs, sig);
+	do_exit(sig);
+}
+
diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c
new file mode 100644
index 00000000..ba150e5d
--- /dev/null
+++ b/arch/xtensa/mm/init.c
@@ -0,0 +1,243 @@
+/*
+ * arch/xtensa/mm/init.c
+ *
+ * Derived from MIPS, PPC.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ *
+ * Chris Zankel	<chris@zankel.net>
+ * Joe Taylor	<joe@tensilica.com, joetylr@yahoo.com>
+ * Marc Gauthier
+ * Kevin Chea
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/bootmem.h>
+#include <linux/gfp.h>
+#include <linux/swap.h>
+#include <linux/mman.h>
+#include <linux/nodemask.h>
+#include <linux/mm.h>
+
+#include <asm/bootparam.h>
+#include <asm/page.h>
+
+/* References to section boundaries */
+
+extern char _ftext, _etext, _fdata, _edata, _rodata_end;
+extern char __init_begin, __init_end;
+
+/*
+ * mem_reserve(start, end, must_exist)
+ *
+ * Reserve some memory from the memory pool.
+ *
+ * Parameters:
+ *  start	Start of region,
+ *  end		End of region,
+ *  must_exist	Must exist in memory pool.
+ *
+ * Returns:
+ *  0 (memory area couldn't be mapped)
+ * -1 (success)
+ */
+
+int __init mem_reserve(unsigned long start, unsigned long end, int must_exist)
+{
+	int i;
+
+	if (start == end)
+		return 0;
+
+	start = start & PAGE_MASK;
+	end = PAGE_ALIGN(end);
+
+	for (i = 0; i < sysmem.nr_banks; i++)
+		if (start < sysmem.bank[i].end
+		    && end >= sysmem.bank[i].start)
+			break;
+
+	if (i == sysmem.nr_banks) {
+		if (must_exist)
+			printk (KERN_WARNING "mem_reserve: [0x%0lx, 0x%0lx) "
+				"not in any region!\n", start, end);
+		return 0;
+	}
+
+	if (start > sysmem.bank[i].start) {
+		if (end < sysmem.bank[i].end) {
+			/* split entry */
+			if (sysmem.nr_banks >= SYSMEM_BANKS_MAX)
+				panic("meminfo overflow\n");
+			sysmem.bank[sysmem.nr_banks].start = end;
+			sysmem.bank[sysmem.nr_banks].end = sysmem.bank[i].end;
+			sysmem.nr_banks++;
+		}
+		sysmem.bank[i].end = start;
+	} else {
+		if (end < sysmem.bank[i].end)
+			sysmem.bank[i].start = end;
+		else {
+			/* remove entry */
+			sysmem.nr_banks--;
+			sysmem.bank[i].start = sysmem.bank[sysmem.nr_banks].start;
+			sysmem.bank[i].end   = sysmem.bank[sysmem.nr_banks].end;
+		}
+	}
+	return -1;
+}
+
+
+/*
+ * Initialize the bootmem system and give it all the memory we have available.
+ */
+
+void __init bootmem_init(void)
+{
+	unsigned long pfn;
+	unsigned long bootmap_start, bootmap_size;
+	int i;
+
+	max_low_pfn = max_pfn = 0;
+	min_low_pfn = ~0;
+
+	for (i=0; i < sysmem.nr_banks; i++) {
+		pfn = PAGE_ALIGN(sysmem.bank[i].start) >> PAGE_SHIFT;
+		if (pfn < min_low_pfn)
+			min_low_pfn = pfn;
+		pfn = PAGE_ALIGN(sysmem.bank[i].end - 1) >> PAGE_SHIFT;
+		if (pfn > max_pfn)
+			max_pfn = pfn;
+	}
+
+	if (min_low_pfn > max_pfn)
+		panic("No memory found!\n");
+
+	max_low_pfn = max_pfn < MAX_MEM_PFN >> PAGE_SHIFT ?
+		max_pfn : MAX_MEM_PFN >> PAGE_SHIFT;
+
+	/* Find an area to use for the bootmem bitmap. */
+
+	bootmap_size = bootmem_bootmap_pages(max_low_pfn - min_low_pfn);
+	bootmap_size <<= PAGE_SHIFT;
+	bootmap_start = ~0;
+
+	for (i=0; i<sysmem.nr_banks; i++)
+		if (sysmem.bank[i].end - sysmem.bank[i].start >= bootmap_size) {
+			bootmap_start = sysmem.bank[i].start;
+			break;
+		}
+
+	if (bootmap_start == ~0UL)
+		panic("Cannot find %ld bytes for bootmap\n", bootmap_size);
+
+	/* Reserve the bootmem bitmap area */
+
+	mem_reserve(bootmap_start, bootmap_start + bootmap_size, 1);
+	bootmap_size = init_bootmem_node(NODE_DATA(0),
+					 bootmap_start >> PAGE_SHIFT,
+					 min_low_pfn,
+					 max_low_pfn);
+
+	/* Add all remaining memory pieces into the bootmem map */
+
+	for (i=0; i<sysmem.nr_banks; i++)
+		free_bootmem(sysmem.bank[i].start,
+			     sysmem.bank[i].end - sysmem.bank[i].start);
+
+}
+
+
+void __init zones_init(void)
+{
+	unsigned long zones_size[MAX_NR_ZONES];
+	int i;
+
+	/* All pages are DMA-able, so we put them all in the DMA zone. */
+
+	zones_size[ZONE_DMA] = max_low_pfn - ARCH_PFN_OFFSET;
+	for (i = 1; i < MAX_NR_ZONES; i++)
+		zones_size[i] = 0;
+
+#ifdef CONFIG_HIGHMEM
+	zones_size[ZONE_HIGHMEM] = max_pfn - max_low_pfn;
+#endif
+
+	free_area_init_node(0, zones_size, ARCH_PFN_OFFSET, NULL);
+}
+
+/*
+ * Initialize memory pages.
+ */
+
+void __init mem_init(void)
+{
+	unsigned long codesize, reservedpages, datasize, initsize;
+	unsigned long highmemsize, tmp, ram;
+
+	max_mapnr = num_physpages = max_low_pfn - ARCH_PFN_OFFSET;
+	high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT);
+	highmemsize = 0;
+
+#ifdef CONFIG_HIGHMEM
+#error HIGHGMEM not implemented in init.c
+#endif
+
+	totalram_pages += free_all_bootmem();
+
+	reservedpages = ram = 0;
+	for (tmp = 0; tmp < max_mapnr; tmp++) {
+		ram++;
+		if (PageReserved(mem_map+tmp))
+			reservedpages++;
+	}
+
+	codesize =  (unsigned long) &_etext - (unsigned long) &_ftext;
+	datasize =  (unsigned long) &_edata - (unsigned long) &_fdata;
+	initsize =  (unsigned long) &__init_end - (unsigned long) &__init_begin;
+
+	printk("Memory: %luk/%luk available (%ldk kernel code, %ldk reserved, "
+	       "%ldk data, %ldk init %ldk highmem)\n",
+	       nr_free_pages() << (PAGE_SHIFT-10),
+	       ram << (PAGE_SHIFT-10),
+	       codesize >> 10,
+	       reservedpages << (PAGE_SHIFT-10),
+	       datasize >> 10,
+	       initsize >> 10,
+	       highmemsize >> 10);
+}
+
+void
+free_reserved_mem(void *start, void *end)
+{
+	for (; start < end; start += PAGE_SIZE) {
+		ClearPageReserved(virt_to_page(start));
+		init_page_count(virt_to_page(start));
+		free_page((unsigned long)start);
+		totalram_pages++;
+	}
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+extern int initrd_is_mapped;
+
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+	if (initrd_is_mapped) {
+		free_reserved_mem((void*)start, (void*)end);
+		printk ("Freeing initrd memory: %ldk freed\n",(end-start)>>10);
+	}
+}
+#endif
+
+void free_initmem(void)
+{
+	free_reserved_mem(&__init_begin, &__init_end);
+	printk("Freeing unused kernel memory: %dk freed\n",
+	       (&__init_end - &__init_begin) >> 10);
+}
diff --git a/arch/xtensa/mm/misc.S b/arch/xtensa/mm/misc.S
new file mode 100644
index 00000000..b048406d
--- /dev/null
+++ b/arch/xtensa/mm/misc.S
@@ -0,0 +1,447 @@
+/*
+ * arch/xtensa/mm/misc.S
+ *
+ * Miscellaneous assembly functions.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2007 Tensilica Inc.
+ *
+ * Chris Zankel	<chris@zankel.net>
+ */
+
+
+#include <linux/linkage.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/asmmacro.h>
+#include <asm/cacheasm.h>
+#include <asm/tlbflush.h>
+
+
+/*
+ * clear_page and clear_user_page are the same for non-cache-aliased configs.
+ *
+ * clear_page (unsigned long page)
+ *                    a2
+ */
+
+ENTRY(clear_page)
+	entry	a1, 16
+
+	movi	a3, 0
+	__loopi	a2, a7, PAGE_SIZE, 32
+	s32i	a3, a2, 0
+	s32i	a3, a2, 4
+	s32i	a3, a2, 8
+	s32i	a3, a2, 12
+	s32i	a3, a2, 16
+	s32i	a3, a2, 20
+	s32i	a3, a2, 24
+	s32i	a3, a2, 28
+	__endla	a2, a7, 32
+
+	retw
+
+/*
+ * copy_page and copy_user_page are the same for non-cache-aliased configs.
+ *
+ * copy_page (void *to, void *from)
+ *               a2          a3
+ */
+
+ENTRY(copy_page)
+	entry	a1, 16
+
+	__loopi a2, a4, PAGE_SIZE, 32
+
+	l32i    a8, a3, 0
+	l32i    a9, a3, 4
+	s32i    a8, a2, 0
+	s32i    a9, a2, 4
+
+	l32i    a8, a3, 8
+	l32i    a9, a3, 12
+	s32i    a8, a2, 8
+	s32i    a9, a2, 12
+
+	l32i    a8, a3, 16
+	l32i    a9, a3, 20
+	s32i    a8, a2, 16
+	s32i    a9, a2, 20
+
+	l32i    a8, a3, 24
+	l32i    a9, a3, 28
+	s32i    a8, a2, 24
+	s32i    a9, a2, 28
+
+	addi    a2, a2, 32
+	addi    a3, a3, 32
+
+	__endl  a2, a4
+
+	retw
+
+#ifdef CONFIG_MMU
+/*
+ * If we have to deal with cache aliasing, we use temporary memory mappings
+ * to ensure that the source and destination pages have the same color as
+ * the virtual address. We use way 0 and 1 for temporary mappings in such cases.
+ *
+ * The temporary DTLB entries shouldn't be flushed by interrupts, but are
+ * flushed by preemptive task switches. Special code in the 
+ * fast_second_level_miss handler re-established the temporary mapping. 
+ * It requires that the PPNs for the destination and source addresses are
+ * in a6, and a7, respectively.
+ */
+
+/* TLB miss exceptions are treated special in the following region */
+
+ENTRY(__tlbtemp_mapping_start)
+
+#if (DCACHE_WAY_SIZE > PAGE_SIZE)
+
+/*
+ * clear_user_page (void *addr, unsigned long vaddr, struct page *page)
+ *                     a2              a3                 a4
+ */
+
+ENTRY(clear_user_page)
+	entry	a1, 32
+
+	/* Mark page dirty and determine alias. */
+
+	movi	a7, (1 << PG_ARCH_1)
+	l32i	a5, a4, PAGE_FLAGS
+	xor	a6, a2, a3
+	extui	a3, a3, PAGE_SHIFT, DCACHE_ALIAS_ORDER
+	extui	a6, a6, PAGE_SHIFT, DCACHE_ALIAS_ORDER
+	or	a5, a5, a7
+	slli	a3, a3, PAGE_SHIFT
+	s32i	a5, a4, PAGE_FLAGS
+
+	/* Skip setting up a temporary DTLB if not aliased. */
+
+	beqz	a6, 1f
+
+	/* Invalidate kernel page. */
+
+	mov	a10, a2
+	call8	__invalidate_dcache_page
+
+	/* Setup a temporary DTLB with the color of the VPN */
+
+	movi	a4, -PAGE_OFFSET + (PAGE_KERNEL | _PAGE_HW_WRITE)
+	movi	a5, TLBTEMP_BASE_1			# virt
+	add	a6, a2, a4				# ppn
+	add	a2, a5, a3				# add 'color'
+
+	wdtlb	a6, a2
+	dsync
+
+1:	movi	a3, 0
+	__loopi	a2, a7, PAGE_SIZE, 32
+	s32i	a3, a2, 0
+	s32i	a3, a2, 4
+	s32i	a3, a2, 8
+	s32i	a3, a2, 12
+	s32i	a3, a2, 16
+	s32i	a3, a2, 20
+	s32i	a3, a2, 24
+	s32i	a3, a2, 28
+	__endla	a2, a7, 32
+
+	bnez	a6, 1f
+	retw
+
+	/* We need to invalidate the temporary idtlb entry, if any. */
+
+1:	addi	a2, a2, -PAGE_SIZE
+	idtlb	a2
+	dsync
+
+	retw
+
+/*
+ * copy_page_user (void *to, void *from, unsigned long vaddr, struct page *page)
+ *                    a2          a3	        a4		    a5
+ */
+
+ENTRY(copy_user_page)
+
+	entry	a1, 32 
+
+	/* Mark page dirty and determine alias for destination. */
+
+	movi	a8, (1 << PG_ARCH_1)
+	l32i	a9, a5, PAGE_FLAGS
+	xor	a6, a2, a4
+	xor	a7, a3, a4
+	extui	a4, a4, PAGE_SHIFT, DCACHE_ALIAS_ORDER
+	extui	a6, a6, PAGE_SHIFT, DCACHE_ALIAS_ORDER
+	extui	a7, a7, PAGE_SHIFT, DCACHE_ALIAS_ORDER
+	or	a9, a9, a8
+	slli	a4, a4, PAGE_SHIFT
+	s32i	a9, a5, PAGE_FLAGS
+	movi	a5, -PAGE_OFFSET + (PAGE_KERNEL | _PAGE_HW_WRITE)
+
+	beqz	a6, 1f
+
+	/* Invalidate dcache */
+
+	mov	a10, a2
+	call8	__invalidate_dcache_page
+
+	/* Setup a temporary DTLB with a matching color. */
+
+	movi	a8, TLBTEMP_BASE_1			# base
+	add	a6, a2, a5				# ppn
+	add	a2, a8, a4				# add 'color'
+
+	wdtlb	a6, a2
+	dsync
+
+	/* Skip setting up a temporary DTLB for destination if not aliased. */
+
+1:	beqz	a7, 1f
+
+	/* Setup a temporary DTLB with a matching color. */
+
+	movi	a8, TLBTEMP_BASE_2			# base
+	add	a7, a3, a5				# ppn
+	add	a3, a8, a4
+	addi	a8, a3, 1				# way1
+
+	wdtlb	a7, a8
+	dsync
+
+1:	__loopi a2, a4, PAGE_SIZE, 32
+
+	l32i    a8, a3, 0
+	l32i    a9, a3, 4
+	s32i    a8, a2, 0
+	s32i    a9, a2, 4
+
+	l32i    a8, a3, 8
+	l32i    a9, a3, 12
+	s32i    a8, a2, 8
+	s32i    a9, a2, 12
+
+	l32i    a8, a3, 16
+	l32i    a9, a3, 20
+	s32i    a8, a2, 16
+	s32i    a9, a2, 20
+
+	l32i    a8, a3, 24
+	l32i    a9, a3, 28
+	s32i    a8, a2, 24
+	s32i    a9, a2, 28
+
+	addi    a2, a2, 32
+	addi    a3, a3, 32
+
+	__endl  a2, a4
+
+	/* We need to invalidate any temporary mapping! */
+
+	bnez	a6, 1f
+	bnez	a7, 2f
+	retw
+
+1:	addi	a2, a2, -PAGE_SIZE
+	idtlb	a2
+	dsync
+	bnez	a7, 2f
+	retw
+
+2:	addi	a3, a3, -PAGE_SIZE+1
+	idtlb	a3
+	dsync
+
+	retw
+
+#endif
+
+#if (DCACHE_WAY_SIZE > PAGE_SIZE)
+
+/*
+ * void __flush_invalidate_dcache_page_alias (addr, phys)
+ *                                             a2    a3
+ */
+
+ENTRY(__flush_invalidate_dcache_page_alias)
+	entry	sp, 16
+
+	movi	a7, 0			# required for exception handler
+	addi	a6, a3, (PAGE_KERNEL | _PAGE_HW_WRITE)
+	mov	a4, a2
+	wdtlb	a6, a2
+	dsync
+
+	___flush_invalidate_dcache_page a2 a3
+
+	idtlb	a4
+	dsync
+
+	retw
+
+#endif
+
+ENTRY(__tlbtemp_mapping_itlb)
+
+#if (ICACHE_WAY_SIZE > PAGE_SIZE)
+	
+ENTRY(__invalidate_icache_page_alias)
+	entry	sp, 16
+
+	addi	a6, a3, (PAGE_KERNEL_EXEC | _PAGE_HW_WRITE)
+	mov	a4, a2
+	witlb	a6, a2
+	isync
+
+	___invalidate_icache_page a2 a3
+
+	iitlb	a4
+	isync
+	retw
+
+#endif
+
+/* End of special treatment in tlb miss exception */
+
+ENTRY(__tlbtemp_mapping_end)
+#endif /* CONFIG_MMU
+
+/*
+ * void __invalidate_icache_page(ulong start)
+ */
+
+ENTRY(__invalidate_icache_page)
+	entry	sp, 16
+
+	___invalidate_icache_page a2 a3
+	isync
+
+	retw
+
+/*
+ * void __invalidate_dcache_page(ulong start)
+ */
+
+ENTRY(__invalidate_dcache_page)
+	entry	sp, 16
+
+	___invalidate_dcache_page a2 a3
+	dsync
+
+	retw
+
+/*
+ * void __flush_invalidate_dcache_page(ulong start)
+ */
+
+ENTRY(__flush_invalidate_dcache_page)
+	entry	sp, 16
+
+	___flush_invalidate_dcache_page a2 a3
+
+	dsync
+	retw
+
+/*
+ * void __flush_dcache_page(ulong start)
+ */
+
+ENTRY(__flush_dcache_page)
+	entry	sp, 16
+
+	___flush_dcache_page a2 a3
+
+	dsync
+	retw
+
+/*
+ * void __invalidate_icache_range(ulong start, ulong size)
+ */
+
+ENTRY(__invalidate_icache_range)
+	entry	sp, 16
+
+	___invalidate_icache_range a2 a3 a4
+	isync
+
+	retw
+
+/*
+ * void __flush_invalidate_dcache_range(ulong start, ulong size)
+ */
+
+ENTRY(__flush_invalidate_dcache_range)
+	entry	sp, 16
+
+	___flush_invalidate_dcache_range a2 a3 a4
+	dsync
+
+	retw
+
+/*
+ * void _flush_dcache_range(ulong start, ulong size)
+ */
+
+ENTRY(__flush_dcache_range)
+	entry	sp, 16
+
+	___flush_dcache_range a2 a3 a4
+	dsync
+
+	retw
+
+/*
+ * void _invalidate_dcache_range(ulong start, ulong size)
+ */
+
+ENTRY(__invalidate_dcache_range)
+	entry	sp, 16
+
+	___invalidate_dcache_range a2 a3 a4
+
+	retw
+
+/*
+ * void _invalidate_icache_all(void)
+ */
+
+ENTRY(__invalidate_icache_all)
+	entry	sp, 16
+
+	___invalidate_icache_all a2 a3
+	isync
+
+	retw
+
+/*
+ * void _flush_invalidate_dcache_all(void)
+ */
+
+ENTRY(__flush_invalidate_dcache_all)
+	entry	sp, 16
+
+	___flush_invalidate_dcache_all a2 a3
+	dsync
+
+	retw
+
+/*
+ * void _invalidate_dcache_all(void)
+ */
+
+ENTRY(__invalidate_dcache_all)
+	entry	sp, 16
+
+	___invalidate_dcache_all a2 a3
+	dsync
+
+	retw
+
diff --git a/arch/xtensa/mm/mmu.c b/arch/xtensa/mm/mmu.c
new file mode 100644
index 00000000..ca81654f
--- /dev/null
+++ b/arch/xtensa/mm/mmu.c
@@ -0,0 +1,68 @@
+/*
+ * xtensa mmu stuff
+ *
+ * Extracted from init.c
+ */
+#include <linux/percpu.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/cache.h>
+
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
+#include <asm/page.h>
+
+void __init paging_init(void)
+{
+	memset(swapper_pg_dir, 0, PAGE_SIZE);
+}
+
+/*
+ * Flush the mmu and reset associated register to default values.
+ */
+void __init init_mmu(void)
+{
+	/* Writing zeros to the <t>TLBCFG special registers ensure
+	 * that valid values exist in the register.  For existing
+	 * PGSZID<w> fields, zero selects the first element of the
+	 * page-size array.  For nonexistent PGSZID<w> fields, zero is
+	 * the best value to write.  Also, when changing PGSZID<w>
+	 * fields, the corresponding TLB must be flushed.
+	 */
+	set_itlbcfg_register(0);
+	set_dtlbcfg_register(0);
+	flush_tlb_all();
+
+	/* Set rasid register to a known value. */
+
+	set_rasid_register(ASID_USER_FIRST);
+
+	/* Set PTEVADDR special register to the start of the page
+	 * table, which is in kernel mappable space (ie. not
+	 * statically mapped).  This register's value is undefined on
+	 * reset.
+	 */
+	set_ptevaddr_register(PGTABLE_START);
+}
+
+struct kmem_cache *pgtable_cache __read_mostly;
+
+static void pgd_ctor(void *addr)
+{
+	pte_t *ptep = (pte_t *)addr;
+	int i;
+
+	for (i = 0; i < 1024; i++, ptep++)
+		pte_clear(NULL, 0, ptep);
+
+}
+
+void __init pgtable_cache_init(void)
+{
+	pgtable_cache = kmem_cache_create("pgd",
+			PAGE_SIZE, PAGE_SIZE,
+			SLAB_HWCACHE_ALIGN,
+			pgd_ctor);
+}
diff --git a/arch/xtensa/mm/tlb.c b/arch/xtensa/mm/tlb.c
new file mode 100644
index 00000000..239461d8
--- /dev/null
+++ b/arch/xtensa/mm/tlb.c
@@ -0,0 +1,144 @@
+/*
+ * arch/xtensa/mm/tlb.c
+ *
+ * Logic that manipulates the Xtensa MMU.  Derived from MIPS.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2003 Tensilica Inc.
+ *
+ * Joe Taylor
+ * Chris Zankel	<chris@zankel.net>
+ * Marc Gauthier
+ */
+
+#include <linux/mm.h>
+#include <asm/processor.h>
+#include <asm/mmu_context.h>
+#include <asm/tlbflush.h>
+#include <asm/system.h>
+#include <asm/cacheflush.h>
+
+
+static inline void __flush_itlb_all (void)
+{
+	int w, i;
+
+	for (w = 0; w < ITLB_ARF_WAYS; w++) {
+		for (i = 0; i < (1 << XCHAL_ITLB_ARF_ENTRIES_LOG2); i++) {
+			int e = w + (i << PAGE_SHIFT);
+			invalidate_itlb_entry_no_isync(e);
+		}
+	}
+	asm volatile ("isync\n");
+}
+
+static inline void __flush_dtlb_all (void)
+{
+	int w, i;
+
+	for (w = 0; w < DTLB_ARF_WAYS; w++) {
+		for (i = 0; i < (1 << XCHAL_DTLB_ARF_ENTRIES_LOG2); i++) {
+			int e = w + (i << PAGE_SHIFT);
+			invalidate_dtlb_entry_no_isync(e);
+		}
+	}
+	asm volatile ("isync\n");
+}
+
+
+void flush_tlb_all (void)
+{
+	__flush_itlb_all();
+	__flush_dtlb_all();
+}
+
+/* If mm is current, we simply assign the current task a new ASID, thus,
+ * invalidating all previous tlb entries. If mm is someone else's user mapping,
+ * wie invalidate the context, thus, when that user mapping is swapped in,
+ * a new context will be assigned to it.
+ */
+
+void flush_tlb_mm(struct mm_struct *mm)
+{
+	if (mm == current->active_mm) {
+		int flags;
+		local_save_flags(flags);
+		__get_new_mmu_context(mm);
+		__load_mmu_context(mm);
+		local_irq_restore(flags);
+	}
+	else
+		mm->context = 0;
+}
+
+#define _ITLB_ENTRIES (ITLB_ARF_WAYS << XCHAL_ITLB_ARF_ENTRIES_LOG2)
+#define _DTLB_ENTRIES (DTLB_ARF_WAYS << XCHAL_DTLB_ARF_ENTRIES_LOG2)
+#if _ITLB_ENTRIES > _DTLB_ENTRIES
+# define _TLB_ENTRIES _ITLB_ENTRIES
+#else
+# define _TLB_ENTRIES _DTLB_ENTRIES
+#endif
+
+void flush_tlb_range (struct vm_area_struct *vma,
+    		      unsigned long start, unsigned long end)
+{
+	struct mm_struct *mm = vma->vm_mm;
+	unsigned long flags;
+
+	if (mm->context == NO_CONTEXT)
+		return;
+
+#if 0
+	printk("[tlbrange<%02lx,%08lx,%08lx>]\n",
+			(unsigned long)mm->context, start, end);
+#endif
+	local_save_flags(flags);
+
+	if (end-start + (PAGE_SIZE-1) <= _TLB_ENTRIES << PAGE_SHIFT) {
+		int oldpid = get_rasid_register();
+		set_rasid_register (ASID_INSERT(mm->context));
+		start &= PAGE_MASK;
+ 		if (vma->vm_flags & VM_EXEC)
+			while(start < end) {
+				invalidate_itlb_mapping(start);
+				invalidate_dtlb_mapping(start);
+				start += PAGE_SIZE;
+			}
+		else
+			while(start < end) {
+				invalidate_dtlb_mapping(start);
+				start += PAGE_SIZE;
+			}
+
+		set_rasid_register(oldpid);
+	} else {
+		flush_tlb_mm(mm);
+	}
+	local_irq_restore(flags);
+}
+
+void flush_tlb_page (struct vm_area_struct *vma, unsigned long page)
+{
+	struct mm_struct* mm = vma->vm_mm;
+	unsigned long flags;
+	int oldpid;
+
+	if(mm->context == NO_CONTEXT)
+		return;
+
+	local_save_flags(flags);
+
+       	oldpid = get_rasid_register();
+
+	if (vma->vm_flags & VM_EXEC)
+		invalidate_itlb_mapping(page);
+	invalidate_dtlb_mapping(page);
+
+	set_rasid_register(oldpid);
+
+	local_irq_restore(flags);
+}
+
diff --git a/arch/xtensa/platforms/iss/Makefile b/arch/xtensa/platforms/iss/Makefile
new file mode 100644
index 00000000..af96e314
--- /dev/null
+++ b/arch/xtensa/platforms/iss/Makefile
@@ -0,0 +1,8 @@
+# $Id: Makefile,v 1.1.1.1 2002/08/28 16:10:14 aroll Exp $
+#
+# Makefile for the Xtensa Instruction Set Simulator (ISS)
+# "prom monitor" library routines under Linux.
+#
+
+obj-y			= io.o console.o setup.o network.o
+
diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c
new file mode 100644
index 00000000..2c723e8b
--- /dev/null
+++ b/arch/xtensa/platforms/iss/console.c
@@ -0,0 +1,297 @@
+/*
+ * arch/xtensa/platforms/iss/console.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001-2005 Tensilica Inc.
+ *   Authors	Christian Zankel, Joe Taylor
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/major.h>
+#include <linux/param.h>
+#include <linux/seq_file.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+
+#include <asm/uaccess.h>
+#include <asm/irq.h>
+
+#include <platform/simcall.h>
+
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+
+#ifdef SERIAL_INLINE
+#define _INLINE_ inline
+#endif
+
+#define SERIAL_MAX_NUM_LINES 1
+#define SERIAL_TIMER_VALUE (20 * HZ)
+
+static struct tty_driver *serial_driver;
+static struct timer_list serial_timer;
+
+static DEFINE_SPINLOCK(timer_lock);
+
+int errno;
+
+static int __simc (int a, int b, int c, int d, int e, int f) __attribute__((__noinline__));
+static int __simc (int a, int b, int c, int d, int e, int f)
+{
+	int ret;
+	__asm__ __volatile__ ("simcall\n"
+			"mov %0, a2\n"
+			"mov %1, a3\n" : "=a" (ret), "=a" (errno)
+			: : "a2", "a3");
+	return ret;
+}
+
+static char *serial_version = "0.1";
+static char *serial_name = "ISS serial driver";
+
+/*
+ * This routine is called whenever a serial port is opened.  It
+ * enables interrupts for a serial port, linking in its async structure into
+ * the IRQ chain.   It also performs the serial-specific
+ * initialization for the tty structure.
+ */
+
+static void rs_poll(unsigned long);
+
+static int rs_open(struct tty_struct *tty, struct file * filp)
+{
+	int line = tty->index;
+
+	if ((line < 0) || (line >= SERIAL_MAX_NUM_LINES))
+		return -ENODEV;
+
+	spin_lock(&timer_lock);
+
+	if (tty->count == 1) {
+		init_timer(&serial_timer);
+		serial_timer.data = (unsigned long) tty;
+		serial_timer.function = rs_poll;
+		mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE);
+	}
+	spin_unlock(&timer_lock);
+
+	return 0;
+}
+
+
+/*
+ * ------------------------------------------------------------
+ * iss_serial_close()
+ *
+ * This routine is called when the serial port gets closed.  First, we
+ * wait for the last remaining data to be sent.  Then, we unlink its
+ * async structure from the interrupt chain if necessary, and we free
+ * that IRQ if nothing is left in the chain.
+ * ------------------------------------------------------------
+ */
+static void rs_close(struct tty_struct *tty, struct file * filp)
+{
+	spin_lock(&timer_lock);
+	if (tty->count == 1)
+		del_timer_sync(&serial_timer);
+	spin_unlock(&timer_lock);
+}
+
+
+static int rs_write(struct tty_struct * tty,
+		    const unsigned char *buf, int count)
+{
+	/* see drivers/char/serialX.c to reference original version */
+
+	__simc (SYS_write, 1, (unsigned long)buf, count, 0, 0);
+	return count;
+}
+
+static void rs_poll(unsigned long priv)
+{
+	struct tty_struct* tty = (struct tty_struct*) priv;
+
+	struct timeval tv = { .tv_sec = 0, .tv_usec = 0 };
+	int i = 0;
+	unsigned char c;
+
+	spin_lock(&timer_lock);
+
+	while (__simc(SYS_select_one, 0, XTISS_SELECT_ONE_READ, (int)&tv,0,0)){
+		__simc (SYS_read, 0, (unsigned long)&c, 1, 0, 0);
+		tty_insert_flip_char(tty, c, TTY_NORMAL);
+		i++;
+	}
+
+	if (i)
+		tty_flip_buffer_push(tty);
+
+
+	mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE);
+	spin_unlock(&timer_lock);
+}
+
+
+static int rs_put_char(struct tty_struct *tty, unsigned char ch)
+{
+	char buf[2];
+
+	buf[0] = ch;
+	buf[1] = '\0';		/* Is this NULL necessary? */
+	__simc (SYS_write, 1, (unsigned long) buf, 1, 0, 0);
+	return 1;
+}
+
+static void rs_flush_chars(struct tty_struct *tty)
+{
+}
+
+static int rs_write_room(struct tty_struct *tty)
+{
+	/* Let's say iss can always accept 2K characters.. */
+	return 2 * 1024;
+}
+
+static int rs_chars_in_buffer(struct tty_struct *tty)
+{
+	/* the iss doesn't buffer characters */
+	return 0;
+}
+
+static void rs_hangup(struct tty_struct *tty)
+{
+	/* Stub, once again.. */
+}
+
+static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+	/* Stub, once again.. */
+}
+
+static int rs_proc_show(struct seq_file *m, void *v)
+{
+	seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version);
+	return 0;
+}
+
+static int rs_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, rs_proc_show, NULL);
+}
+
+static const struct file_operations rs_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= rs_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static const struct tty_operations serial_ops = {
+	.open = rs_open,
+	.close = rs_close,
+	.write = rs_write,
+	.put_char = rs_put_char,
+	.flush_chars = rs_flush_chars,
+	.write_room = rs_write_room,
+	.chars_in_buffer = rs_chars_in_buffer,
+	.hangup = rs_hangup,
+	.wait_until_sent = rs_wait_until_sent,
+	.proc_fops = &rs_proc_fops,
+};
+
+int __init rs_init(void)
+{
+	serial_driver = alloc_tty_driver(1);
+
+	printk ("%s %s\n", serial_name, serial_version);
+
+	/* Initialize the tty_driver structure */
+
+	serial_driver->owner = THIS_MODULE;
+	serial_driver->driver_name = "iss_serial";
+	serial_driver->name = "ttyS";
+	serial_driver->major = TTY_MAJOR;
+	serial_driver->minor_start = 64;
+	serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
+	serial_driver->subtype = SERIAL_TYPE_NORMAL;
+	serial_driver->init_termios = tty_std_termios;
+	serial_driver->init_termios.c_cflag =
+		B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+	serial_driver->flags = TTY_DRIVER_REAL_RAW;
+
+	tty_set_operations(serial_driver, &serial_ops);
+
+	if (tty_register_driver(serial_driver))
+		panic("Couldn't register serial driver\n");
+	return 0;
+}
+
+
+static __exit void rs_exit(void)
+{
+	int error;
+
+	if ((error = tty_unregister_driver(serial_driver)))
+		printk("ISS_SERIAL: failed to unregister serial driver (%d)\n",
+		       error);
+	put_tty_driver(serial_driver);
+}
+
+
+/* We use `late_initcall' instead of just `__initcall' as a workaround for
+ * the fact that (1) simcons_tty_init can't be called before tty_init,
+ * (2) tty_init is called via `module_init', (3) if statically linked,
+ * module_init == device_init, and (4) there's no ordering of init lists.
+ * We can do this easily because simcons is always statically linked, but
+ * other tty drivers that depend on tty_init and which must use
+ * `module_init' to declare their init routines are likely to be broken.
+ */
+
+late_initcall(rs_init);
+
+
+#ifdef CONFIG_SERIAL_CONSOLE
+
+static void iss_console_write(struct console *co, const char *s, unsigned count)
+{
+	int len = strlen(s);
+
+	if (s != 0 && *s != 0)
+		__simc (SYS_write, 1, (unsigned long)s,
+			count < len ? count : len,0,0);
+}
+
+static struct tty_driver* iss_console_device(struct console *c, int *index)
+{
+	*index = c->index;
+	return serial_driver;
+}
+
+
+static struct console sercons = {
+	.name = "ttyS",
+	.write = iss_console_write,
+	.device = iss_console_device,
+	.flags = CON_PRINTBUFFER,
+	.index = -1
+};
+
+static int __init iss_console_init(void)
+{
+	register_console(&sercons);
+	return 0;
+}
+
+console_initcall(iss_console_init);
+
+#endif /* CONFIG_SERIAL_CONSOLE */
+
diff --git a/arch/xtensa/platforms/iss/include/platform/hardware.h b/arch/xtensa/platforms/iss/include/platform/hardware.h
new file mode 100644
index 00000000..6930c12a
--- /dev/null
+++ b/arch/xtensa/platforms/iss/include/platform/hardware.h
@@ -0,0 +1,29 @@
+/*
+ * include/asm-xtensa/platform-iss/hardware.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 Tensilica Inc.
+ */
+
+/*
+ * This file contains the default configuration of ISS.
+ */
+
+#ifndef _XTENSA_PLATFORM_ISS_HARDWARE_H
+#define _XTENSA_PLATFORM_ISS_HARDWARE_H
+
+/*
+ * Memory configuration.
+ */
+
+#define PLATFORM_DEFAULT_MEM_START	0x00000000
+#define PLATFORM_DEFAULT_MEM_SIZE	0x08000000
+
+/*
+ * Interrupt configuration.
+ */
+
+#endif /* _XTENSA_PLATFORM_ISS_HARDWARE_H */
diff --git a/arch/xtensa/platforms/iss/include/platform/simcall.h b/arch/xtensa/platforms/iss/include/platform/simcall.h
new file mode 100644
index 00000000..b7952c06
--- /dev/null
+++ b/arch/xtensa/platforms/iss/include/platform/simcall.h
@@ -0,0 +1,62 @@
+/*
+ * include/asm-xtensa/platform-iss/simcall.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_PLATFORM_ISS_SIMCALL_H
+#define _XTENSA_PLATFORM_ISS_SIMCALL_H
+
+
+/*
+ *  System call like services offered by the simulator host.
+ */
+
+#define SYS_nop		0	/* unused */
+#define SYS_exit	1	/*x*/
+#define SYS_fork	2
+#define SYS_read	3	/*x*/
+#define SYS_write	4	/*x*/
+#define SYS_open	5	/*x*/
+#define SYS_close	6	/*x*/
+#define SYS_rename	7	/*x 38 - waitpid */
+#define SYS_creat	8	/*x*/
+#define SYS_link	9	/*x (not implemented on WIN32) */
+#define SYS_unlink	10	/*x*/
+#define SYS_execv	11	/* n/a - execve */
+#define SYS_execve	12	/* 11 - chdir */
+#define SYS_pipe	13	/* 42 - time */
+#define SYS_stat	14	/* 106 - mknod */
+#define SYS_chmod	15
+#define SYS_chown	16	/* 202 - lchown */
+#define SYS_utime	17	/* 30 - break */
+#define SYS_wait	18	/* n/a - oldstat */
+#define SYS_lseek	19	/*x*/
+#define SYS_getpid	20
+#define SYS_isatty	21	/* n/a - mount */
+#define SYS_fstat	22	/* 108 - oldumount */
+#define SYS_time	23	/* 13 - setuid */
+#define SYS_gettimeofday 24	/*x 78 - getuid (not implemented on WIN32) */
+#define SYS_times	25	/*X 43 - stime (Xtensa-specific implementation) */
+#define SYS_socket      26
+#define SYS_sendto      27
+#define SYS_recvfrom    28
+#define SYS_select_one  29      /* not compitible select, one file descriptor at the time */
+#define SYS_bind        30
+#define SYS_ioctl	31
+
+/*
+ * SYS_select_one specifiers
+ */
+
+#define  XTISS_SELECT_ONE_READ    1
+#define  XTISS_SELECT_ONE_WRITE   2
+#define  XTISS_SELECT_ONE_EXCEPT  3
+
+
+#endif /* _XTENSA_PLATFORM_ISS_SIMCALL_H */
+
diff --git a/arch/xtensa/platforms/iss/io.c b/arch/xtensa/platforms/iss/io.c
new file mode 100644
index 00000000..571d0b24
--- /dev/null
+++ b/arch/xtensa/platforms/iss/io.c
@@ -0,0 +1,32 @@
+/* This file isn't really needed right now. */
+
+#if 0
+
+#include <asm/io.h>
+#include <platform/platform-iss/simcall.h>
+
+extern int __simc ();
+
+
+char iss_serial_getc()
+{
+  char c;
+  __simc( SYS_read, 0, &c, 1 );
+  return c;
+}
+
+void iss_serial_putc( char c )
+{
+  __simc( SYS_write, 1, &c, 1 );
+}
+
+void iss_serial_puts( char *s )
+{
+  if( s != 0 && *s != 0 )
+    __simc( SYS_write, 1, s, strlen(s) );
+}
+
+/*#error Need I/O ports to specific hardware!*/
+
+#endif
+
diff --git a/arch/xtensa/platforms/iss/network.c b/arch/xtensa/platforms/iss/network.c
new file mode 100644
index 00000000..f717e20d
--- /dev/null
+++ b/arch/xtensa/platforms/iss/network.c
@@ -0,0 +1,826 @@
+/*
+ *
+ * arch/xtensa/platforms/iss/network.c
+ *
+ * Platform specific initialization.
+ *
+ * Authors: Chris Zankel <chris@zankel.net>
+ * Based on work form the UML team.
+ *
+ * Copyright 2005 Tensilica Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/list.h>
+#include <linux/irq.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/if_ether.h>
+#include <linux/inetdevice.h>
+#include <linux/init.h>
+#include <linux/if_tun.h>
+#include <linux/etherdevice.h>
+#include <linux/interrupt.h>
+#include <linux/ioctl.h>
+#include <linux/bootmem.h>
+#include <linux/ethtool.h>
+#include <linux/rtnetlink.h>
+#include <linux/platform_device.h>
+
+#include <platform/simcall.h>
+
+#define DRIVER_NAME "iss-netdev"
+#define ETH_MAX_PACKET 1500
+#define ETH_HEADER_OTHER 14
+#define ISS_NET_TIMER_VALUE (2 * HZ)
+
+
+static DEFINE_SPINLOCK(opened_lock);
+static LIST_HEAD(opened);
+
+static DEFINE_SPINLOCK(devices_lock);
+static LIST_HEAD(devices);
+
+/* ------------------------------------------------------------------------- */
+
+/* We currently only support the TUNTAP transport protocol. */
+
+#define TRANSPORT_TUNTAP_NAME "tuntap"
+#define TRANSPORT_TUNTAP_MTU ETH_MAX_PACKET
+
+struct tuntap_info {
+	char dev_name[IFNAMSIZ];
+	int fixed_config;
+	unsigned char gw[ETH_ALEN];
+	int fd;
+};
+
+/* ------------------------------------------------------------------------- */
+
+
+/* This structure contains out private information for the driver. */
+
+struct iss_net_private {
+
+	struct list_head device_list;
+	struct list_head opened_list;
+
+	spinlock_t lock;
+	struct net_device *dev;
+	struct platform_device pdev;
+	struct timer_list tl;
+	struct net_device_stats stats;
+
+	struct timer_list timer;
+	unsigned int timer_val;
+
+	int index;
+	int mtu;
+
+	unsigned char mac[ETH_ALEN];
+	int have_mac;
+
+	struct {
+		union {
+			struct tuntap_info tuntap;
+		} info;
+
+		int (*open)(struct iss_net_private *lp);
+		void (*close)(struct iss_net_private *lp);
+		int (*read)(struct iss_net_private *lp, struct sk_buff **skb);
+		int (*write)(struct iss_net_private *lp, struct sk_buff **skb);
+		unsigned short (*protocol)(struct sk_buff *skb);
+		int (*poll)(struct iss_net_private *lp);
+	} tp;
+
+};
+
+/* ======================= ISS SIMCALL INTERFACE =========================== */
+
+/* Note: __simc must _not_ be declared inline! */
+
+static int errno;
+
+static int __simc (int a, int b, int c, int d, int e, int f) __attribute__((__noinline__));
+static int __simc (int a, int b, int c, int d, int e, int f)
+{
+	int ret;
+	__asm__ __volatile__ ("simcall\n"
+	    		      "mov %0, a2\n"
+			      "mov %1, a3\n" : "=a" (ret), "=a" (errno)
+			      : : "a2", "a3");
+	return ret;
+}
+
+static int inline simc_open(char *file, int flags, int mode)
+{
+	return __simc(SYS_open, (int) file, flags, mode, 0, 0);
+}
+
+static int inline simc_close(int fd)
+{
+	return __simc(SYS_close, fd, 0, 0, 0, 0);
+}
+
+static int inline simc_ioctl(int fd, int request, void *arg)
+{
+	return __simc(SYS_ioctl, fd, request, (int) arg, 0, 0);
+}
+
+static int inline simc_read(int fd, void *buf, size_t count)
+{
+	return __simc(SYS_read, fd, (int) buf, count, 0, 0);
+}
+
+static int inline simc_write(int fd, void *buf, size_t count)
+{
+	return __simc(SYS_write, fd, (int) buf, count, 0, 0);
+}
+
+static int inline simc_poll(int fd)
+{
+	struct timeval tv = { .tv_sec = 0, .tv_usec = 0 };
+
+	return __simc(SYS_select_one, fd, XTISS_SELECT_ONE_READ, (int)&tv,0,0);
+}
+
+/* ================================ HELPERS ================================ */
+
+
+static char *split_if_spec(char *str, ...)
+{
+	char **arg, *end;
+	va_list ap;
+
+	va_start(ap, str);
+	while ((arg = va_arg(ap, char**)) != NULL) {
+		if (*str == '\0')
+			return NULL;
+		end = strchr(str, ',');
+		if (end != str)
+			*arg = str;
+		if (end == NULL)
+			return NULL;
+		*end ++ = '\0';
+		str = end;
+	}
+	va_end(ap);
+	return str;
+}
+
+
+#if 0
+/* Adjust SKB. */
+
+struct sk_buff *ether_adjust_skb(struct sk_buff *skb, int extra)
+{
+	if ((skb != NULL) && (skb_tailroom(skb) < extra)) {
+		struct sk_buff *skb2;
+
+		skb2 = skb_copy_expand(skb, 0, extra, GFP_ATOMIC);
+		dev_kfree_skb(skb);
+		skb = skb2;
+	}
+	if (skb != NULL)
+		skb_put(skb, extra);
+
+	return skb;
+}
+#endif
+
+/* Return the IP address as a string for a given device. */
+
+static void dev_ip_addr(void *d, char *buf, char *bin_buf)
+{
+	struct net_device *dev = d;
+	struct in_device *ip = dev->ip_ptr;
+	struct in_ifaddr *in;
+	__be32 addr;
+
+	if ((ip == NULL) || ((in = ip->ifa_list) == NULL)) {
+		printk(KERN_WARNING "Device not assigned an IP address!\n");
+		return;
+	}
+
+	addr = in->ifa_address;
+	sprintf(buf, "%d.%d.%d.%d", addr & 0xff, (addr >> 8) & 0xff,
+		(addr >> 16) & 0xff, addr >> 24);
+
+	if (bin_buf) {
+		bin_buf[0] = addr & 0xff;
+		bin_buf[1] = (addr >> 8) & 0xff;
+		bin_buf[2] = (addr >> 16) & 0xff;
+		bin_buf[3] = addr >> 24;
+	}
+}
+
+/* Set Ethernet address of the specified device. */
+
+static void inline set_ether_mac(void *d, unsigned char *addr)
+{
+	struct net_device *dev = d;
+	memcpy(dev->dev_addr, addr, ETH_ALEN);
+}
+
+
+/* ======================= TUNTAP TRANSPORT INTERFACE ====================== */
+
+static int tuntap_open(struct iss_net_private *lp)
+{
+	struct ifreq ifr;
+	char *dev_name = lp->tp.info.tuntap.dev_name;
+	int err = -EINVAL;
+	int fd;
+
+	/* We currently only support a fixed configuration. */
+
+	if (!lp->tp.info.tuntap.fixed_config)
+		return -EINVAL;
+
+	if ((fd = simc_open("/dev/net/tun", 02, 0)) < 0) {	/* O_RDWR */
+		printk("Failed to open /dev/net/tun, returned %d "
+		       "(errno = %d)\n", fd, errno);
+		return fd;
+	}
+
+	memset(&ifr, 0, sizeof ifr);
+	ifr.ifr_flags = IFF_TAP | IFF_NO_PI;
+	strlcpy(ifr.ifr_name, dev_name, sizeof ifr.ifr_name);
+
+	if ((err = simc_ioctl(fd, TUNSETIFF, (void*) &ifr)) < 0) {
+		printk("Failed to set interface, returned %d "
+		       "(errno = %d)\n", err, errno);
+		simc_close(fd);
+		return err;
+	}
+
+	lp->tp.info.tuntap.fd = fd;
+	return err;
+}
+
+static void tuntap_close(struct iss_net_private *lp)
+{
+#if 0
+	if (lp->tp.info.tuntap.fixed_config)
+		iter_addresses(lp->tp.info.tuntap.dev, close_addr, lp->host.dev_name);
+#endif
+	simc_close(lp->tp.info.tuntap.fd);
+	lp->tp.info.tuntap.fd = -1;
+}
+
+static int tuntap_read (struct iss_net_private *lp, struct sk_buff **skb)
+{
+#if 0
+	*skb = ether_adjust_skb(*skb, ETH_HEADER_OTHER);
+	if (*skb == NULL)
+		return -ENOMEM;
+#endif
+
+	return simc_read(lp->tp.info.tuntap.fd,
+			(*skb)->data, (*skb)->dev->mtu + ETH_HEADER_OTHER);
+}
+
+static int tuntap_write (struct iss_net_private *lp, struct sk_buff **skb)
+{
+	return simc_write(lp->tp.info.tuntap.fd, (*skb)->data, (*skb)->len);
+}
+
+unsigned short tuntap_protocol(struct sk_buff *skb)
+{
+	return eth_type_trans(skb, skb->dev);
+}
+
+static int tuntap_poll(struct iss_net_private *lp)
+{
+	return simc_poll(lp->tp.info.tuntap.fd);
+}
+
+/*
+ * Currently only a device name is supported.
+ * ethX=tuntap[,[mac address][,[device name]]]
+ */
+
+static int tuntap_probe(struct iss_net_private *lp, int index, char *init)
+{
+	const int len = strlen(TRANSPORT_TUNTAP_NAME);
+	char *dev_name = NULL, *mac_str = NULL, *rem = NULL;
+
+	/* Transport should be 'tuntap': ethX=tuntap,mac,dev_name */
+
+	if (strncmp(init, TRANSPORT_TUNTAP_NAME, len))
+		return 0;
+
+	if (*(init += strlen(TRANSPORT_TUNTAP_NAME)) == ',') {
+		if ((rem=split_if_spec(init+1, &mac_str, &dev_name)) != NULL) {
+			printk("Extra garbage on specification : '%s'\n", rem);
+			return 0;
+		}
+	} else if (*init != '\0') {
+		printk("Invalid argument: %s. Skipping device!\n", init);
+		return 0;
+	}
+
+	if (dev_name) {
+		strncpy(lp->tp.info.tuntap.dev_name, dev_name,
+			 sizeof lp->tp.info.tuntap.dev_name);
+		lp->tp.info.tuntap.fixed_config = 1;
+	} else
+		strcpy(lp->tp.info.tuntap.dev_name, TRANSPORT_TUNTAP_NAME);
+
+
+#if 0
+	if (setup_etheraddr(mac_str, lp->mac))
+		lp->have_mac = 1;
+#endif
+	lp->mtu = TRANSPORT_TUNTAP_MTU;
+
+	//lp->info.tuntap.gate_addr = gate_addr;
+
+	lp->tp.info.tuntap.fd = -1;
+
+	lp->tp.open = tuntap_open;
+	lp->tp.close = tuntap_close;
+	lp->tp.read = tuntap_read;
+	lp->tp.write = tuntap_write;
+	lp->tp.protocol = tuntap_protocol;
+	lp->tp.poll = tuntap_poll;
+
+	printk("TUN/TAP backend - ");
+#if 0
+	if (lp->host.gate_addr != NULL)
+		printk("IP = %s", lp->host.gate_addr);
+#endif
+	printk("\n");
+
+	return 1;
+}
+
+/* ================================ ISS NET ================================ */
+
+static int iss_net_rx(struct net_device *dev)
+{
+	struct iss_net_private *lp = netdev_priv(dev);
+	int pkt_len;
+	struct sk_buff *skb;
+
+	/* Check if there is any new data. */
+
+	if (lp->tp.poll(lp) == 0)
+		return 0;
+
+	/* Try to allocate memory, if it fails, try again next round. */
+
+	if ((skb = dev_alloc_skb(dev->mtu + 2 + ETH_HEADER_OTHER)) == NULL) {
+		lp->stats.rx_dropped++;
+		return 0;
+	}
+
+	skb_reserve(skb, 2);
+
+	/* Setup skb */
+
+	skb->dev = dev;
+	skb_reset_mac_header(skb);
+	pkt_len = lp->tp.read(lp, &skb);
+	skb_put(skb, pkt_len);
+
+	if (pkt_len > 0) {
+		skb_trim(skb, pkt_len);
+		skb->protocol = lp->tp.protocol(skb);
+
+		lp->stats.rx_bytes += skb->len;
+		lp->stats.rx_packets++;
+	//	netif_rx(skb);
+		netif_rx_ni(skb);
+		return pkt_len;
+	}
+	kfree_skb(skb);
+	return pkt_len;
+}
+
+static int iss_net_poll(void)
+{
+	struct list_head *ele;
+	int err, ret = 0;
+
+	spin_lock(&opened_lock);
+
+	list_for_each(ele, &opened) {
+		struct iss_net_private *lp;
+
+		lp = list_entry(ele, struct iss_net_private, opened_list);
+
+		if (!netif_running(lp->dev))
+			break;
+
+		spin_lock(&lp->lock);
+
+		while ((err = iss_net_rx(lp->dev)) > 0)
+			ret++;
+
+		spin_unlock(&lp->lock);
+
+		if (err < 0) {
+			printk(KERN_ERR "Device '%s' read returned %d, "
+			       "shutting it down\n", lp->dev->name, err);
+			dev_close(lp->dev);
+		} else {
+			// FIXME reactivate_fd(lp->fd, ISS_ETH_IRQ);
+		}
+	}
+
+	spin_unlock(&opened_lock);
+	return ret;
+}
+
+
+static void iss_net_timer(unsigned long priv)
+{
+	struct iss_net_private* lp = (struct iss_net_private*) priv;
+
+	spin_lock(&lp->lock);
+
+	iss_net_poll();
+
+	mod_timer(&lp->timer, jiffies + lp->timer_val);
+
+	spin_unlock(&lp->lock);
+}
+
+
+static int iss_net_open(struct net_device *dev)
+{
+	struct iss_net_private *lp = netdev_priv(dev);
+	char addr[sizeof "255.255.255.255\0"];
+	int err;
+
+	spin_lock(&lp->lock);
+
+	if ((err = lp->tp.open(lp)) < 0)
+		goto out;
+
+	if (!lp->have_mac) {
+		dev_ip_addr(dev, addr, &lp->mac[2]);
+		set_ether_mac(dev, lp->mac);
+	}
+
+	netif_start_queue(dev);
+
+	/* clear buffer - it can happen that the host side of the interface
+	 * is full when we get here. In this case, new data is never queued,
+	 * SIGIOs never arrive, and the net never works.
+	 */
+	while ((err = iss_net_rx(dev)) > 0)
+		;
+
+	spin_lock(&opened_lock);
+	list_add(&lp->opened_list, &opened);
+	spin_unlock(&opened_lock);
+
+	init_timer(&lp->timer);
+	lp->timer_val = ISS_NET_TIMER_VALUE;
+	lp->timer.data = (unsigned long) lp;
+	lp->timer.function = iss_net_timer;
+	mod_timer(&lp->timer, jiffies + lp->timer_val);
+
+out:
+	spin_unlock(&lp->lock);
+	return err;
+}
+
+static int iss_net_close(struct net_device *dev)
+{
+	struct iss_net_private *lp = netdev_priv(dev);
+printk("iss_net_close!\n");
+	netif_stop_queue(dev);
+	spin_lock(&lp->lock);
+
+	spin_lock(&opened_lock);
+	list_del(&opened);
+	spin_unlock(&opened_lock);
+
+	del_timer_sync(&lp->timer);
+
+	lp->tp.close(lp);
+
+	spin_unlock(&lp->lock);
+	return 0;
+}
+
+static int iss_net_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct iss_net_private *lp = netdev_priv(dev);
+	unsigned long flags;
+	int len;
+
+	netif_stop_queue(dev);
+	spin_lock_irqsave(&lp->lock, flags);
+
+	len = lp->tp.write(lp, &skb);
+
+	if (len == skb->len) {
+		lp->stats.tx_packets++;
+		lp->stats.tx_bytes += skb->len;
+		dev->trans_start = jiffies;
+		netif_start_queue(dev);
+
+		/* this is normally done in the interrupt when tx finishes */
+		netif_wake_queue(dev);
+
+	} else if (len == 0) {
+		netif_start_queue(dev);
+		lp->stats.tx_dropped++;
+
+	} else {
+		netif_start_queue(dev);
+		printk(KERN_ERR "iss_net_start_xmit: failed(%d)\n", len);
+	}
+
+	spin_unlock_irqrestore(&lp->lock, flags);
+
+	dev_kfree_skb(skb);
+	return NETDEV_TX_OK;
+}
+
+
+static struct net_device_stats *iss_net_get_stats(struct net_device *dev)
+{
+	struct iss_net_private *lp = netdev_priv(dev);
+	return &lp->stats;
+}
+
+static void iss_net_set_multicast_list(struct net_device *dev)
+{
+#if 0
+	if (dev->flags & IFF_PROMISC)
+		return;
+	else if (!netdev_mc_empty(dev))
+		dev->flags |= IFF_ALLMULTI;
+	else
+		dev->flags &= ~IFF_ALLMULTI;
+#endif
+}
+
+static void iss_net_tx_timeout(struct net_device *dev)
+{
+#if 0
+	dev->trans_start = jiffies;
+	netif_wake_queue(dev);
+#endif
+}
+
+static int iss_net_set_mac(struct net_device *dev, void *addr)
+{
+#if 0
+	struct iss_net_private *lp = netdev_priv(dev);
+	struct sockaddr *hwaddr = addr;
+
+	spin_lock(&lp->lock);
+	memcpy(dev->dev_addr, hwaddr->sa_data, ETH_ALEN);
+	spin_unlock(&lp->lock);
+#endif
+
+	return 0;
+}
+
+static int iss_net_change_mtu(struct net_device *dev, int new_mtu)
+{
+#if 0
+	struct iss_net_private *lp = netdev_priv(dev);
+	int err = 0;
+
+	spin_lock(&lp->lock);
+
+	// FIXME not needed new_mtu = transport_set_mtu(new_mtu, &lp->user);
+
+	if (new_mtu < 0)
+		err = new_mtu;
+	else
+		dev->mtu = new_mtu;
+
+	spin_unlock(&lp->lock);
+	return err;
+#endif
+	return -EINVAL;
+}
+
+void iss_net_user_timer_expire(unsigned long _conn)
+{
+}
+
+
+static struct platform_driver iss_net_driver = {
+	.driver = {
+		.name  = DRIVER_NAME,
+	},
+};
+
+static int driver_registered;
+
+static const struct net_device_ops iss_netdev_ops = {
+	.ndo_open		= iss_net_open,
+	.ndo_stop		= iss_net_close,
+	.ndo_get_stats		= iss_net_get_stats,
+	.ndo_start_xmit		= iss_net_start_xmit,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= iss_net_change_mtu,
+	.ndo_set_mac_address	= iss_net_set_mac,
+	//.ndo_do_ioctl		= iss_net_ioctl,
+	.ndo_tx_timeout		= iss_net_tx_timeout,
+	.ndo_set_multicast_list = iss_net_set_multicast_list,
+};
+
+static int iss_net_configure(int index, char *init)
+{
+	struct net_device *dev;
+	struct iss_net_private *lp;
+	int err;
+
+	if ((dev = alloc_etherdev(sizeof *lp)) == NULL) {
+		printk(KERN_ERR "eth_configure: failed to allocate device\n");
+		return 1;
+	}
+
+	/* Initialize private element. */
+
+	lp = netdev_priv(dev);
+	*lp = ((struct iss_net_private) {
+		.device_list		= LIST_HEAD_INIT(lp->device_list),
+		.opened_list		= LIST_HEAD_INIT(lp->opened_list),
+		.lock			= __SPIN_LOCK_UNLOCKED(lp.lock),
+		.dev			= dev,
+		.index			= index,
+		//.fd                   = -1,
+		.mac			= { 0xfe, 0xfd, 0x0, 0x0, 0x0, 0x0 },
+		.have_mac		= 0,
+		});
+
+	/*
+	 * Try all transport protocols.
+	 * Note: more protocols can be added by adding '&& !X_init(lp, eth)'.
+	 */
+
+	if (!tuntap_probe(lp, index, init)) {
+		printk("Invalid arguments. Skipping device!\n");
+		goto errout;
+	}
+
+	printk(KERN_INFO "Netdevice %d ", index);
+	if (lp->have_mac)
+		printk("(%pM) ", lp->mac);
+	printk(": ");
+
+	/* sysfs register */
+
+	if (!driver_registered) {
+		platform_driver_register(&iss_net_driver);
+		driver_registered = 1;
+	}
+
+	spin_lock(&devices_lock);
+	list_add(&lp->device_list, &devices);
+	spin_unlock(&devices_lock);
+
+	lp->pdev.id = index;
+	lp->pdev.name = DRIVER_NAME;
+	platform_device_register(&lp->pdev);
+	SET_NETDEV_DEV(dev,&lp->pdev.dev);
+
+	/*
+	 * If this name ends up conflicting with an existing registered
+	 * netdevice, that is OK, register_netdev{,ice}() will notice this
+	 * and fail.
+	 */
+	snprintf(dev->name, sizeof dev->name, "eth%d", index);
+
+	dev->netdev_ops = &iss_netdev_ops;
+	dev->mtu = lp->mtu;
+	dev->watchdog_timeo = (HZ >> 1);
+	dev->irq = -1;
+
+	rtnl_lock();
+	err = register_netdevice(dev);
+	rtnl_unlock();
+
+	if (err) {
+		printk("Error registering net device!\n");
+		/* XXX: should we call ->remove() here? */
+		free_netdev(dev);
+		return 1;
+	}
+
+	init_timer(&lp->tl);
+	lp->tl.function = iss_net_user_timer_expire;
+
+#if 0
+	if (lp->have_mac)
+		set_ether_mac(dev, lp->mac);
+#endif
+	return 0;
+
+errout:
+	// FIXME: unregister; free, etc..
+	return -EIO;
+
+}
+
+/* ------------------------------------------------------------------------- */
+
+/* Filled in during early boot */
+
+struct list_head eth_cmd_line = LIST_HEAD_INIT(eth_cmd_line);
+
+struct iss_net_init {
+	struct list_head list;
+	char *init;		/* init string */
+	int index;
+};
+
+/*
+ * Parse the command line and look for 'ethX=...' fields, and register all
+ * those fields. They will be later initialized in iss_net_init.
+ */
+
+#define ERR KERN_ERR "iss_net_setup: "
+
+static int iss_net_setup(char *str)
+{
+	struct iss_net_private *device = NULL;
+	struct iss_net_init *new;
+	struct list_head *ele;
+	char *end;
+	int n;
+
+	n = simple_strtoul(str, &end, 0);
+	if (end == str) {
+		printk(ERR "Failed to parse '%s'\n", str);
+		return 1;
+	}
+	if (n < 0) {
+		printk(ERR "Device %d is negative\n", n);
+		return 1;
+	}
+	if (*(str = end) != '=') {
+		printk(ERR "Expected '=' after device number\n");
+		return 1;
+	}
+
+	spin_lock(&devices_lock);
+
+	list_for_each(ele, &devices) {
+		device = list_entry(ele, struct iss_net_private, device_list);
+		if (device->index == n)
+			break;
+	}
+
+	spin_unlock(&devices_lock);
+
+	if (device && device->index == n) {
+		printk(ERR "Device %d already configured\n", n);
+		return 1;
+	}
+
+	if ((new = alloc_bootmem(sizeof new)) == NULL) {
+		printk("Alloc_bootmem failed\n");
+		return 1;
+	}
+
+	INIT_LIST_HEAD(&new->list);
+	new->index = n;
+	new->init = str + 1;
+
+	list_add_tail(&new->list, &eth_cmd_line);
+	return 1;
+}
+
+#undef ERR
+
+__setup("eth=", iss_net_setup);
+
+/*
+ * Initialize all ISS Ethernet devices previously registered in iss_net_setup.
+ */
+
+static int iss_net_init(void)
+{
+	struct list_head *ele, *next;
+
+	/* Walk through all Ethernet devices specified in the command line. */
+
+	list_for_each_safe(ele, next, &eth_cmd_line) {
+		struct iss_net_init *eth;
+		eth = list_entry(ele, struct iss_net_init, list);
+		iss_net_configure(eth->index, eth->init);
+	}
+
+	return 1;
+}
+
+module_init(iss_net_init);
+
diff --git a/arch/xtensa/platforms/iss/setup.c b/arch/xtensa/platforms/iss/setup.c
new file mode 100644
index 00000000..f60c8cf6
--- /dev/null
+++ b/arch/xtensa/platforms/iss/setup.c
@@ -0,0 +1,110 @@
+/*
+ *
+ * arch/xtensa/platform-iss/setup.c
+ *
+ * Platform specific initialization.
+ *
+ * Authors: Chris Zankel <chris@zankel.net>
+ *          Joe Taylor <joe@tensilica.com>
+ *
+ * Copyright 2001 - 2005 Tensilica Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/major.h>
+#include <linux/blkdev.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/stringify.h>
+#include <linux/notifier.h>
+
+#include <asm/platform.h>
+#include <asm/bootparam.h>
+
+
+void __init platform_init(bp_tag_t* bootparam)
+{
+
+}
+
+void platform_halt(void)
+{
+	printk (" ** Called platform_halt(), looping forever! **\n");
+	while (1);
+}
+
+void platform_power_off(void)
+{
+	printk (" ** Called platform_power_off(), looping forever! **\n");
+	while (1);
+}
+void platform_restart(void)
+{
+	/* Flush and reset the mmu, simulate a processor reset, and
+	 * jump to the reset vector. */
+
+	__asm__ __volatile__("movi	a2, 15\n\t"
+			     "wsr	a2, " __stringify(ICOUNTLEVEL) "\n\t"
+			     "movi	a2, 0\n\t"
+			     "wsr	a2, " __stringify(ICOUNT) "\n\t"
+			     "wsr	a2, " __stringify(IBREAKENABLE) "\n\t"
+			     "wsr	a2, " __stringify(LCOUNT) "\n\t"
+			     "movi	a2, 0x1f\n\t"
+			     "wsr	a2, " __stringify(PS) "\n\t"
+			     "isync\n\t"
+			     "jx	%0\n\t"
+			     :
+			     : "a" (XCHAL_RESET_VECTOR_VADDR)
+			     : "a2");
+
+	/* control never gets here */
+}
+
+extern void iss_net_poll(void);
+
+const char twirl[]="|/-\\|/-\\";
+
+void platform_heartbeat(void)
+{
+#if 0
+	static int i = 0, j = 0;
+
+	if (--i < 0) {
+		i = 99;
+		printk("\r%c\r", twirl[j++]);
+		if (j == 8)
+			j = 0;
+	}
+#endif
+}
+
+
+
+static int
+iss_panic_event(struct notifier_block *this, unsigned long event, void *ptr)
+{
+	__asm__ __volatile__("movi a2, -1; simcall\n");
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block iss_panic_block = {
+	iss_panic_event,
+	NULL,
+	0
+};
+
+void __init platform_setup(char **p_cmdline)
+{
+	atomic_notifier_chain_register(&panic_notifier_list, &iss_panic_block);
+}
diff --git a/arch/xtensa/platforms/s6105/Makefile b/arch/xtensa/platforms/s6105/Makefile
new file mode 100644
index 00000000..0be6194b
--- /dev/null
+++ b/arch/xtensa/platforms/s6105/Makefile
@@ -0,0 +1,3 @@
+# Makefile for the Stretch S6105 eval board
+
+obj-y		:= setup.o device.o
diff --git a/arch/xtensa/platforms/s6105/device.c b/arch/xtensa/platforms/s6105/device.c
new file mode 100644
index 00000000..4f4fc971
--- /dev/null
+++ b/arch/xtensa/platforms/s6105/device.c
@@ -0,0 +1,161 @@
+/*
+ * s6105 platform devices
+ *
+ * Copyright (c) 2009 emlix GmbH
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+
+#include <variant/hardware.h>
+#include <variant/dmac.h>
+
+#include <platform/gpio.h>
+
+#define GPIO3_INTNUM		3
+#define UART_INTNUM		4
+#define GMAC_INTNUM		5
+
+static const signed char gpio3_irq_mappings[] = {
+	S6_INTC_GPIO(3),
+	-1
+};
+
+static const signed char uart_irq_mappings[] = {
+	S6_INTC_UART(0),
+	S6_INTC_UART(1),
+	-1,
+};
+
+static const signed char gmac_irq_mappings[] = {
+	S6_INTC_GMAC_STAT,
+	S6_INTC_GMAC_ERR,
+	S6_INTC_DMA_HOSTTERMCNT(0),
+	S6_INTC_DMA_HOSTTERMCNT(1),
+	-1
+};
+
+const signed char *platform_irq_mappings[NR_IRQS] = {
+	[GPIO3_INTNUM] = gpio3_irq_mappings,
+	[UART_INTNUM] = uart_irq_mappings,
+	[GMAC_INTNUM] = gmac_irq_mappings,
+};
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.membase = (void *)S6_REG_UART + 0x0000,
+		.mapbase = S6_REG_UART + 0x0000,
+		.irq = UART_INTNUM,
+		.uartclk = S6_SCLK,
+		.regshift = 2,
+		.iotype = SERIAL_IO_MEM,
+		.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST,
+	},
+	{
+		.membase = (void *)S6_REG_UART + 0x1000,
+		.mapbase = S6_REG_UART + 0x1000,
+		.irq = UART_INTNUM,
+		.uartclk = S6_SCLK,
+		.regshift = 2,
+		.iotype = SERIAL_IO_MEM,
+		.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST,
+	},
+	{ },
+};
+
+static struct resource s6_gmac_resource[] = {
+	{
+		.name   = "mem",
+		.start  = (resource_size_t)S6_REG_GMAC,
+		.end    = (resource_size_t)S6_REG_GMAC + 0x10000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "dma",
+		.start  = (resource_size_t)
+			DMA_CHNL(S6_REG_HIFDMA, S6_HIFDMA_GMACTX),
+		.end    = (resource_size_t)
+			DMA_CHNL(S6_REG_HIFDMA, S6_HIFDMA_GMACTX) + 0x100 - 1,
+		.flags  = IORESOURCE_DMA,
+	},
+	{
+		.name   = "dma",
+		.start  = (resource_size_t)
+			DMA_CHNL(S6_REG_HIFDMA, S6_HIFDMA_GMACRX),
+		.end    = (resource_size_t)
+			DMA_CHNL(S6_REG_HIFDMA, S6_HIFDMA_GMACRX) + 0x100 - 1,
+		.flags  = IORESOURCE_DMA,
+	},
+	{
+		.name   = "io",
+		.start  = (resource_size_t)S6_MEM_GMAC,
+		.end    = (resource_size_t)S6_MEM_GMAC + 0x2000000 - 1,
+		.flags  = IORESOURCE_IO,
+	},
+	{
+		.name   = "irq",
+		.start  = (resource_size_t)GMAC_INTNUM,
+		.flags  = IORESOURCE_IRQ,
+	},
+	{
+		.name   = "irq",
+		.start  = (resource_size_t)PHY_POLL,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static int __init prepare_phy_irq(int pin)
+{
+	int irq;
+	if (gpio_request(pin, "s6gmac_phy") < 0)
+		goto fail;
+	if (gpio_direction_input(pin) < 0)
+		goto free;
+	irq = gpio_to_irq(pin);
+	if (irq < 0)
+		goto free;
+	if (irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW) < 0)
+		goto free;
+	return irq;
+free:
+	gpio_free(pin);
+fail:
+	return PHY_POLL;
+}
+
+static struct platform_device platform_devices[] = {
+	{
+		.name = "serial8250",
+		.id = PLAT8250_DEV_PLATFORM,
+		.dev = {
+			.platform_data = serial_platform_data,
+		},
+	},
+	{
+		.name = "s6gmac",
+		.id = 0,
+		.resource = s6_gmac_resource,
+		.num_resources = ARRAY_SIZE(s6_gmac_resource),
+	},
+	{
+		I2C_BOARD_INFO("m41t62", S6I2C_ADDR_M41T62),
+	},
+};
+
+static int __init device_init(void)
+{
+	int i;
+
+	s6_gmac_resource[5].start = prepare_phy_irq(GPIO_PHY_IRQ);
+
+	for (i = 0; i < ARRAY_SIZE(platform_devices); i++)
+		platform_device_register(&platform_devices[i]);
+	return 0;
+}
+arch_initcall_sync(device_init);
diff --git a/arch/xtensa/platforms/s6105/include/platform/gpio.h b/arch/xtensa/platforms/s6105/include/platform/gpio.h
new file mode 100644
index 00000000..fa11aa4b
--- /dev/null
+++ b/arch/xtensa/platforms/s6105/include/platform/gpio.h
@@ -0,0 +1,27 @@
+#ifndef __ASM_XTENSA_S6105_GPIO_H
+#define __ASM_XTENSA_S6105_GPIO_H
+
+#define GPIO_BP_TEMP_ALARM	0
+#define GPIO_PB_RESET_IN	1
+#define GPIO_EXP_IRQ		2
+#define GPIO_TRIGGER_IRQ	3
+#define GPIO_RTC_IRQ		4
+#define GPIO_PHY_IRQ		5
+#define GPIO_IMAGER_RESET	6
+#define GPIO_SD_IRQ		7
+#define GPIO_MINI_BOOT_INH	8
+#define GPIO_BOARD_RESET	9
+#define GPIO_EXP_PRESENT	10
+#define GPIO_LED1_NGREEN	12
+#define GPIO_LED1_RED		13
+#define GPIO_LED0_NGREEN	14
+#define GPIO_LED0_NRED		15
+#define GPIO_SPI_CS0		16
+#define GPIO_SPI_CS1		17
+#define GPIO_SPI_CS3		19
+#define GPIO_SPI_CS4		20
+#define GPIO_SD_WP		21
+#define GPIO_BP_RESET		22
+#define GPIO_ALARM_OUT		23
+
+#endif /* __ASM_XTENSA_S6105_GPIO_H */
diff --git a/arch/xtensa/platforms/s6105/include/platform/hardware.h b/arch/xtensa/platforms/s6105/include/platform/hardware.h
new file mode 100644
index 00000000..d628efac
--- /dev/null
+++ b/arch/xtensa/platforms/s6105/include/platform/hardware.h
@@ -0,0 +1,11 @@
+#ifndef __XTENSA_S6105_HARDWARE_H
+#define __XTENSA_S6105_HARDWARE_H
+
+#define PLATFORM_DEFAULT_MEM_START	0x40000000
+#define PLATFORM_DEFAULT_MEM_SIZE	0x08000000
+
+#define MAX_DMA_ADDRESS			0
+
+#define KERNELOFFSET			(PLATFORM_DEFAULT_MEM_START + 0x1000)
+
+#endif /* __XTENSA_S6105_HARDWARE_H */
diff --git a/arch/xtensa/platforms/s6105/include/platform/serial.h b/arch/xtensa/platforms/s6105/include/platform/serial.h
new file mode 100644
index 00000000..c8a771e5
--- /dev/null
+++ b/arch/xtensa/platforms/s6105/include/platform/serial.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_XTENSA_S6105_SERIAL_H
+#define __ASM_XTENSA_S6105_SERIAL_H
+
+#include <variant/hardware.h>
+
+#define BASE_BAUD (S6_SCLK / 16)
+
+#endif /* __ASM_XTENSA_S6105_SERIAL_H */
diff --git a/arch/xtensa/platforms/s6105/setup.c b/arch/xtensa/platforms/s6105/setup.c
new file mode 100644
index 00000000..86ce730f
--- /dev/null
+++ b/arch/xtensa/platforms/s6105/setup.c
@@ -0,0 +1,73 @@
+/*
+ * s6105 control routines
+ *
+ * Copyright (c) 2009 emlix GmbH
+ */
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <asm/bootparam.h>
+
+#include <variant/hardware.h>
+#include <variant/gpio.h>
+
+#include <platform/gpio.h>
+
+void platform_halt(void)
+{
+	local_irq_disable();
+	while (1)
+		;
+}
+
+void platform_power_off(void)
+{
+	platform_halt();
+}
+
+void platform_restart(void)
+{
+	platform_halt();
+}
+
+void __init platform_setup(char **cmdline)
+{
+	unsigned long reg;
+
+	reg = readl(S6_REG_GREG1 + S6_GREG1_PLLSEL);
+	reg &= ~(S6_GREG1_PLLSEL_GMAC_MASK << S6_GREG1_PLLSEL_GMAC |
+		S6_GREG1_PLLSEL_GMII_MASK << S6_GREG1_PLLSEL_GMII);
+	reg |= S6_GREG1_PLLSEL_GMAC_125MHZ << S6_GREG1_PLLSEL_GMAC |
+		S6_GREG1_PLLSEL_GMII_125MHZ << S6_GREG1_PLLSEL_GMII;
+	writel(reg, S6_REG_GREG1 + S6_GREG1_PLLSEL);
+
+	reg = readl(S6_REG_GREG1 + S6_GREG1_CLKGATE);
+	reg &= ~(1 << S6_GREG1_BLOCK_SB);
+	reg &= ~(1 << S6_GREG1_BLOCK_GMAC);
+	writel(reg, S6_REG_GREG1 + S6_GREG1_CLKGATE);
+
+	reg = readl(S6_REG_GREG1 + S6_GREG1_BLOCKENA);
+	reg |= 1 << S6_GREG1_BLOCK_SB;
+	reg |= 1 << S6_GREG1_BLOCK_GMAC;
+	writel(reg, S6_REG_GREG1 + S6_GREG1_BLOCKENA);
+
+	printk(KERN_NOTICE "S6105 on Stretch S6000 - "
+		"Copyright (C) 2009 emlix GmbH <info@emlix.com>\n");
+}
+
+void __init platform_init(bp_tag_t *first)
+{
+	s6_gpio_init(0);
+	gpio_request(GPIO_LED1_NGREEN, "led1_green");
+	gpio_request(GPIO_LED1_RED, "led1_red");
+	gpio_direction_output(GPIO_LED1_NGREEN, 1);
+}
+
+void platform_heartbeat(void)
+{
+	static unsigned int c;
+
+	if (!(++c & 0x4F))
+		gpio_direction_output(GPIO_LED1_RED, !(c & 0x10));
+}
diff --git a/arch/xtensa/platforms/xt2000/Makefile b/arch/xtensa/platforms/xt2000/Makefile
new file mode 100644
index 00000000..54d018e4
--- /dev/null
+++ b/arch/xtensa/platforms/xt2000/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Tensilica XT2000 Emulation Board
+#
+
+obj-y 			= setup.o
diff --git a/arch/xtensa/platforms/xt2000/include/platform/hardware.h b/arch/xtensa/platforms/xt2000/include/platform/hardware.h
new file mode 100644
index 00000000..886ef156
--- /dev/null
+++ b/arch/xtensa/platforms/xt2000/include/platform/hardware.h
@@ -0,0 +1,54 @@
+/*
+ * platform/hardware.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 Tensilica Inc.
+ */
+
+/*
+ * This file contains the hardware configuration of the XT2000 board.
+ */
+
+#ifndef _XTENSA_XT2000_HARDWARE_H
+#define _XTENSA_XT2000_HARDWARE_H
+
+#include <variant/core.h>
+
+/* 
+ * Memory configuration.
+ */
+
+#define PLATFORM_DEFAULT_MEM_START 0x00000000
+#define PLATFORM_DEFAULT_MEM_SIZE 0x08000000
+
+/*
+ * Number of platform IRQs
+ */
+#define PLATFORM_NR_IRQS 3
+/*
+ * On-board components.
+ */
+
+#define SONIC83934_INTNUM	XCHAL_EXTINT3_NUM
+#define SONIC83934_ADDR		IOADDR(0x0d030000)
+
+/*
+ * V3-PCI
+ */
+
+/* The XT2000 uses the V3 as a cascaded interrupt controller for the PCI bus */
+
+#define IRQ_PCI_A		(XCHAL_NUM_INTERRUPTS + 0)
+#define IRQ_PCI_B		(XCHAL_NUM_INTERRUPTS + 1)
+#define IRQ_PCI_C		(XCHAL_NUM_INTERRUPTS + 2)
+
+/*
+ * Various other components.
+ */
+
+#define XT2000_LED_ADDR		IOADDR(0x0d040000)
+
+#endif /* _XTENSA_XT2000_HARDWARE_H */
diff --git a/arch/xtensa/platforms/xt2000/include/platform/serial.h b/arch/xtensa/platforms/xt2000/include/platform/serial.h
new file mode 100644
index 00000000..7226cf73
--- /dev/null
+++ b/arch/xtensa/platforms/xt2000/include/platform/serial.h
@@ -0,0 +1,28 @@
+/*
+ * platform/serial.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_XT2000_SERIAL_H
+#define _XTENSA_XT2000_SERIAL_H
+
+#include <variant/core.h>
+#include <asm/io.h>
+
+/*  National-Semi PC16552D DUART:  */
+
+#define DUART16552_1_INTNUM	XCHAL_EXTINT4_NUM
+#define DUART16552_2_INTNUM	XCHAL_EXTINT5_NUM
+
+#define DUART16552_1_ADDR	IOADDR(0x0d050020)	/* channel 1 */
+#define DUART16552_2_ADDR	IOADDR(0x0d050000)	/* channel 2 */
+
+#define DUART16552_XTAL_FREQ	18432000	/* crystal frequency in Hz */
+#define BASE_BAUD ( DUART16552_XTAL_FREQ / 16 )
+
+#endif /* _XTENSA_XT2000_SERIAL_H */
diff --git a/arch/xtensa/platforms/xt2000/setup.c b/arch/xtensa/platforms/xt2000/setup.c
new file mode 100644
index 00000000..9e83940a
--- /dev/null
+++ b/arch/xtensa/platforms/xt2000/setup.c
@@ -0,0 +1,181 @@
+/*
+ * arch/xtensa/platforms/xt2000/setup.c
+ *
+ * Platform specific functions for the XT2000 board.
+ *
+ * Authors:	Chris Zankel <chris@zankel.net>
+ *		Joe Taylor <joe@tensilica.com>
+ *
+ * Copyright 2001 - 2004 Tensilica Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/stringify.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+
+#include <asm/processor.h>
+#include <asm/platform.h>
+#include <asm/bootparam.h>
+#include <platform/hardware.h>
+#include <platform/serial.h>
+
+/* Assumes s points to an 8-chr string.  No checking for NULL. */
+
+static void led_print (int f, char *s)
+{
+	unsigned long* led_addr = (unsigned long*) (XT2000_LED_ADDR + 0xE0) + f;
+	int i;
+	for (i = f; i < 8; i++)
+		if ((*led_addr++ = *s++) == 0)
+		    break;
+}
+
+void platform_halt(void)
+{
+	led_print (0, "  HALT  ");
+	local_irq_disable();
+	while (1);
+}
+
+void platform_power_off(void)
+{
+	led_print (0, "POWEROFF");
+	local_irq_disable();
+	while (1);
+}
+
+void platform_restart(void)
+{
+	/* Flush and reset the mmu, simulate a processor reset, and
+	 * jump to the reset vector. */
+
+	__asm__ __volatile__ ("movi	a2, 15\n\t"
+			      "wsr	a2, " __stringify(ICOUNTLEVEL) "\n\t"
+			      "movi	a2, 0\n\t"
+			      "wsr	a2, " __stringify(ICOUNT) "\n\t"
+			      "wsr	a2, " __stringify(IBREAKENABLE) "\n\t"
+			      "wsr	a2, " __stringify(LCOUNT) "\n\t"
+			      "movi	a2, 0x1f\n\t"
+			      "wsr	a2, " __stringify(PS) "\n\t"
+			      "isync\n\t"
+			      "jx	%0\n\t"
+			      :
+			      : "a" (XCHAL_RESET_VECTOR_VADDR)
+			      : "a2"
+			      );
+
+	/* control never gets here */
+}
+
+void __init platform_setup(char** cmdline)
+{
+	led_print (0, "LINUX   ");
+}
+
+/* early initialization */
+
+extern sysmem_info_t __initdata sysmem;
+
+void platform_init(bp_tag_t* first)
+{
+	/* Set default memory block if not provided by the bootloader. */
+
+	if (sysmem.nr_banks == 0) {
+		sysmem.nr_banks = 1;
+		sysmem.bank[0].start = PLATFORM_DEFAULT_MEM_START;
+		sysmem.bank[0].end = PLATFORM_DEFAULT_MEM_START
+				     + PLATFORM_DEFAULT_MEM_SIZE;
+	}
+}
+
+/* Heartbeat. Let the LED blink. */
+
+void platform_heartbeat(void)
+{
+	static int i=0, t = 0;
+
+	if (--t < 0)
+	{
+		t = 59;
+		led_print(7, i ? ".": " ");
+		i ^= 1;
+	}
+}
+
+//#define RS_TABLE_SIZE 2
+//#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
+
+#define _SERIAL_PORT(_base,_irq)					\
+{									\
+	.mapbase	= (_base),					\
+	.membase	= (void*)(_base),				\
+	.irq		= (_irq),					\
+	.uartclk	= DUART16552_XTAL_FREQ,				\
+	.iotype		= UPIO_MEM,					\
+	.flags		= UPF_BOOT_AUTOCONF,				\
+	.regshift	= 2,						\
+}
+
+static struct plat_serial8250_port xt2000_serial_data[] = {
+#if XCHAL_HAVE_BE
+	_SERIAL_PORT(DUART16552_1_ADDR + 3, DUART16552_1_INTNUM),
+	_SERIAL_PORT(DUART16552_2_ADDR + 3, DUART16552_2_INTNUM),
+#else
+	_SERIAL_PORT(DUART16552_1_ADDR, DUART16552_1_INTNUM),
+	_SERIAL_PORT(DUART16552_2_ADDR, DUART16552_2_INTNUM),
+#endif
+	{ }
+};
+
+static struct platform_device xt2000_serial8250_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev		= {
+	    .platform_data = xt2000_serial_data,
+	},
+};
+
+static struct resource xt2000_sonic_res[] = {
+	{
+		.start = SONIC83934_ADDR,
+		.end   = SONIC83934_ADDR + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = SONIC83934_INTNUM,
+		.end = SONIC83934_INTNUM,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device xt2000_sonic_device = {
+	.name		= "xtsonic",
+	.num_resources	= ARRAY_SIZE(xt2000_sonic_res),
+	.resource		= xt2000_sonic_res,
+};
+
+static int __init xt2000_setup_devinit(void)
+{
+	platform_device_register(&xt2000_serial8250_device);
+	platform_device_register(&xt2000_sonic_device);
+
+	return 0;
+}
+
+device_initcall(xt2000_setup_devinit);
diff --git a/arch/xtensa/variants/dc232b/include/variant/core.h b/arch/xtensa/variants/dc232b/include/variant/core.h
new file mode 100644
index 00000000..525bd3d9
--- /dev/null
+++ b/arch/xtensa/variants/dc232b/include/variant/core.h
@@ -0,0 +1,424 @@
+/*
+ * Xtensa processor core configuration information.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1999-2007 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_CORE_CONFIGURATION_H
+#define _XTENSA_CORE_CONFIGURATION_H
+
+
+/****************************************************************************
+	    Parameters Useful for Any Code, USER or PRIVILEGED
+ ****************************************************************************/
+
+/*
+ *  Note:  Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is
+ *  configured, and a value of 0 otherwise.  These macros are always defined.
+ */
+
+
+/*----------------------------------------------------------------------
+				ISA
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_BE			0	/* big-endian byte ordering */
+#define XCHAL_HAVE_WINDOWED		1	/* windowed registers option */
+#define XCHAL_NUM_AREGS			32	/* num of physical addr regs */
+#define XCHAL_NUM_AREGS_LOG2		5	/* log2(XCHAL_NUM_AREGS) */
+#define XCHAL_MAX_INSTRUCTION_SIZE	3	/* max instr bytes (3..8) */
+#define XCHAL_HAVE_DEBUG		1	/* debug option */
+#define XCHAL_HAVE_DENSITY		1	/* 16-bit instructions */
+#define XCHAL_HAVE_LOOPS		1	/* zero-overhead loops */
+#define XCHAL_HAVE_NSA			1	/* NSA/NSAU instructions */
+#define XCHAL_HAVE_MINMAX		1	/* MIN/MAX instructions */
+#define XCHAL_HAVE_SEXT			1	/* SEXT instruction */
+#define XCHAL_HAVE_CLAMPS		1	/* CLAMPS instruction */
+#define XCHAL_HAVE_MUL16		1	/* MUL16S/MUL16U instructions */
+#define XCHAL_HAVE_MUL32		1	/* MULL instruction */
+#define XCHAL_HAVE_MUL32_HIGH		0	/* MULUH/MULSH instructions */
+#define XCHAL_HAVE_DIV32		1	/* QUOS/QUOU/REMS/REMU instructions */
+#define XCHAL_HAVE_L32R			1	/* L32R instruction */
+#define XCHAL_HAVE_ABSOLUTE_LITERALS	1	/* non-PC-rel (extended) L32R */
+#define XCHAL_HAVE_CONST16		0	/* CONST16 instruction */
+#define XCHAL_HAVE_ADDX			1	/* ADDX#/SUBX# instructions */
+#define XCHAL_HAVE_WIDE_BRANCHES	0	/* B*.W18 or B*.W15 instr's */
+#define XCHAL_HAVE_PREDICTED_BRANCHES	0	/* B[EQ/EQZ/NE/NEZ]T instr's */
+#define XCHAL_HAVE_CALL4AND12		1	/* (obsolete option) */
+#define XCHAL_HAVE_ABS			1	/* ABS instruction */
+/*#define XCHAL_HAVE_POPC		0*/	/* POPC instruction */
+/*#define XCHAL_HAVE_CRC		0*/	/* CRC instruction */
+#define XCHAL_HAVE_RELEASE_SYNC		1	/* L32AI/S32RI instructions */
+#define XCHAL_HAVE_S32C1I		1	/* S32C1I instruction */
+#define XCHAL_HAVE_SPECULATION		0	/* speculation */
+#define XCHAL_HAVE_FULL_RESET		1	/* all regs/state reset */
+#define XCHAL_NUM_CONTEXTS		1	/* */
+#define XCHAL_NUM_MISC_REGS		2	/* num of scratch regs (0..4) */
+#define XCHAL_HAVE_TAP_MASTER		0	/* JTAG TAP control instr's */
+#define XCHAL_HAVE_PRID			1	/* processor ID register */
+#define XCHAL_HAVE_THREADPTR		1	/* THREADPTR register */
+#define XCHAL_HAVE_BOOLEANS		0	/* boolean registers */
+#define XCHAL_HAVE_CP			1	/* CPENABLE reg (coprocessor) */
+#define XCHAL_CP_MAXCFG			8	/* max allowed cp id plus one */
+#define XCHAL_HAVE_MAC16		1	/* MAC16 package */
+#define XCHAL_HAVE_VECTORFPU2005	0	/* vector floating-point pkg */
+#define XCHAL_HAVE_FP			0	/* floating point pkg */
+#define XCHAL_HAVE_VECTRA1		0	/* Vectra I  pkg */
+#define XCHAL_HAVE_VECTRALX		0	/* Vectra LX pkg */
+#define XCHAL_HAVE_HIFI2		0	/* HiFi2 Audio Engine pkg */
+
+
+/*----------------------------------------------------------------------
+				MISC
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_WRITEBUFFER_ENTRIES	8	/* size of write buffer */
+#define XCHAL_INST_FETCH_WIDTH		4	/* instr-fetch width in bytes */
+#define XCHAL_DATA_WIDTH		4	/* data width in bytes */
+/*  In T1050, applies to selected core load and store instructions (see ISA): */
+#define XCHAL_UNALIGNED_LOAD_EXCEPTION	1	/* unaligned loads cause exc. */
+#define XCHAL_UNALIGNED_STORE_EXCEPTION	1	/* unaligned stores cause exc.*/
+
+#define XCHAL_SW_VERSION		701001	/* sw version of this header */
+
+#define XCHAL_CORE_ID			"dc232b"	/* alphanum core name
+						   (CoreID) set in the Xtensa
+						   Processor Generator */
+
+#define XCHAL_CORE_DESCRIPTION		"Diamond 232L Standard Core Rev.B (LE)"
+#define XCHAL_BUILD_UNIQUE_ID		0x0000BEEF	/* 22-bit sw build ID */
+
+/*
+ *  These definitions describe the hardware targeted by this software.
+ */
+#define XCHAL_HW_CONFIGID0		0xC56307FE	/* ConfigID hi 32 bits*/
+#define XCHAL_HW_CONFIGID1		0x0D40BEEF	/* ConfigID lo 32 bits*/
+#define XCHAL_HW_VERSION_NAME		"LX2.1.1"	/* full version name */
+#define XCHAL_HW_VERSION_MAJOR		2210	/* major ver# of targeted hw */
+#define XCHAL_HW_VERSION_MINOR		1	/* minor ver# of targeted hw */
+#define XCHAL_HW_VERSION		221001	/* major*100+minor */
+#define XCHAL_HW_REL_LX2		1
+#define XCHAL_HW_REL_LX2_1		1
+#define XCHAL_HW_REL_LX2_1_1		1
+#define XCHAL_HW_CONFIGID_RELIABLE	1
+/*  If software targets a *range* of hardware versions, these are the bounds: */
+#define XCHAL_HW_MIN_VERSION_MAJOR	2210	/* major v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION_MINOR	1	/* minor v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION		221001	/* earliest targeted hw */
+#define XCHAL_HW_MAX_VERSION_MAJOR	2210	/* major v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION_MINOR	1	/* minor v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION		221001	/* latest targeted hw */
+
+
+/*----------------------------------------------------------------------
+				CACHE
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_ICACHE_LINESIZE		32	/* I-cache line size in bytes */
+#define XCHAL_DCACHE_LINESIZE		32	/* D-cache line size in bytes */
+#define XCHAL_ICACHE_LINEWIDTH		5	/* log2(I line size in bytes) */
+#define XCHAL_DCACHE_LINEWIDTH		5	/* log2(D line size in bytes) */
+
+#define XCHAL_ICACHE_SIZE		16384	/* I-cache size in bytes or 0 */
+#define XCHAL_DCACHE_SIZE		16384	/* D-cache size in bytes or 0 */
+
+#define XCHAL_DCACHE_IS_WRITEBACK	1	/* writeback feature */
+
+
+
+
+/****************************************************************************
+    Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code
+ ****************************************************************************/
+
+
+#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY
+
+/*----------------------------------------------------------------------
+				CACHE
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_PIF			1	/* any outbound PIF present */
+
+/*  If present, cache size in bytes == (ways * 2^(linewidth + setwidth)).  */
+
+/*  Number of cache sets in log2(lines per way):  */
+#define XCHAL_ICACHE_SETWIDTH		7
+#define XCHAL_DCACHE_SETWIDTH		7
+
+/*  Cache set associativity (number of ways):  */
+#define XCHAL_ICACHE_WAYS		4
+#define XCHAL_DCACHE_WAYS		4
+
+/*  Cache features:  */
+#define XCHAL_ICACHE_LINE_LOCKABLE	1
+#define XCHAL_DCACHE_LINE_LOCKABLE	1
+#define XCHAL_ICACHE_ECC_PARITY		0
+#define XCHAL_DCACHE_ECC_PARITY		0
+
+/*  Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits):  */
+#define XCHAL_CA_BITS			4
+
+
+/*----------------------------------------------------------------------
+			INTERNAL I/D RAM/ROMs and XLMI
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_INSTROM		0	/* number of core instr. ROMs */
+#define XCHAL_NUM_INSTRAM		0	/* number of core instr. RAMs */
+#define XCHAL_NUM_DATAROM		0	/* number of core data ROMs */
+#define XCHAL_NUM_DATARAM		0	/* number of core data RAMs */
+#define XCHAL_NUM_URAM			0	/* number of core unified RAMs*/
+#define XCHAL_NUM_XLMI			0	/* number of core XLMI ports */
+
+
+/*----------------------------------------------------------------------
+			INTERRUPTS and TIMERS
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_INTERRUPTS		1	/* interrupt option */
+#define XCHAL_HAVE_HIGHPRI_INTERRUPTS	1	/* med/high-pri. interrupts */
+#define XCHAL_HAVE_NMI			1	/* non-maskable interrupt */
+#define XCHAL_HAVE_CCOUNT		1	/* CCOUNT reg. (timer option) */
+#define XCHAL_NUM_TIMERS		3	/* number of CCOMPAREn regs */
+#define XCHAL_NUM_INTERRUPTS		22	/* number of interrupts */
+#define XCHAL_NUM_INTERRUPTS_LOG2	5	/* ceil(log2(NUM_INTERRUPTS)) */
+#define XCHAL_NUM_EXTINTERRUPTS		17	/* num of external interrupts */
+#define XCHAL_NUM_INTLEVELS		6	/* number of interrupt levels
+						   (not including level zero) */
+#define XCHAL_EXCM_LEVEL		3	/* level masked by PS.EXCM */
+	/* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */
+
+/*  Masks of interrupts at each interrupt level:  */
+#define XCHAL_INTLEVEL1_MASK		0x001F80FF
+#define XCHAL_INTLEVEL2_MASK		0x00000100
+#define XCHAL_INTLEVEL3_MASK		0x00200E00
+#define XCHAL_INTLEVEL4_MASK		0x00001000
+#define XCHAL_INTLEVEL5_MASK		0x00002000
+#define XCHAL_INTLEVEL6_MASK		0x00000000
+#define XCHAL_INTLEVEL7_MASK		0x00004000
+
+/*  Masks of interrupts at each range 1..n of interrupt levels:  */
+#define XCHAL_INTLEVEL1_ANDBELOW_MASK	0x001F80FF
+#define XCHAL_INTLEVEL2_ANDBELOW_MASK	0x001F81FF
+#define XCHAL_INTLEVEL3_ANDBELOW_MASK	0x003F8FFF
+#define XCHAL_INTLEVEL4_ANDBELOW_MASK	0x003F9FFF
+#define XCHAL_INTLEVEL5_ANDBELOW_MASK	0x003FBFFF
+#define XCHAL_INTLEVEL6_ANDBELOW_MASK	0x003FBFFF
+#define XCHAL_INTLEVEL7_ANDBELOW_MASK	0x003FFFFF
+
+/*  Level of each interrupt:  */
+#define XCHAL_INT0_LEVEL		1
+#define XCHAL_INT1_LEVEL		1
+#define XCHAL_INT2_LEVEL		1
+#define XCHAL_INT3_LEVEL		1
+#define XCHAL_INT4_LEVEL		1
+#define XCHAL_INT5_LEVEL		1
+#define XCHAL_INT6_LEVEL		1
+#define XCHAL_INT7_LEVEL		1
+#define XCHAL_INT8_LEVEL		2
+#define XCHAL_INT9_LEVEL		3
+#define XCHAL_INT10_LEVEL		3
+#define XCHAL_INT11_LEVEL		3
+#define XCHAL_INT12_LEVEL		4
+#define XCHAL_INT13_LEVEL		5
+#define XCHAL_INT14_LEVEL		7
+#define XCHAL_INT15_LEVEL		1
+#define XCHAL_INT16_LEVEL		1
+#define XCHAL_INT17_LEVEL		1
+#define XCHAL_INT18_LEVEL		1
+#define XCHAL_INT19_LEVEL		1
+#define XCHAL_INT20_LEVEL		1
+#define XCHAL_INT21_LEVEL		3
+#define XCHAL_DEBUGLEVEL		6	/* debug interrupt level */
+#define XCHAL_HAVE_DEBUG_EXTERN_INT	1	/* OCD external db interrupt */
+#define XCHAL_NMILEVEL			7	/* NMI "level" (for use with
+						   EXCSAVE/EPS/EPC_n, RFI n) */
+
+/*  Type of each interrupt:  */
+#define XCHAL_INT0_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT1_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT2_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT3_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT4_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT5_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT6_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT7_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT8_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT9_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT10_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT11_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT12_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT13_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT14_TYPE 	XTHAL_INTTYPE_NMI
+#define XCHAL_INT15_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT16_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT17_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT18_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT19_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT20_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT21_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+
+/*  Masks of interrupts for each type of interrupt:  */
+#define XCHAL_INTTYPE_MASK_UNCONFIGURED	0xFFC00000
+#define XCHAL_INTTYPE_MASK_SOFTWARE	0x00000880
+#define XCHAL_INTTYPE_MASK_EXTERN_EDGE	0x003F8000
+#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL	0x0000133F
+#define XCHAL_INTTYPE_MASK_TIMER	0x00002440
+#define XCHAL_INTTYPE_MASK_NMI		0x00004000
+#define XCHAL_INTTYPE_MASK_WRITE_ERROR	0x00000000
+
+/*  Interrupt numbers assigned to specific interrupt sources:  */
+#define XCHAL_TIMER0_INTERRUPT		6	/* CCOMPARE0 */
+#define XCHAL_TIMER1_INTERRUPT		10	/* CCOMPARE1 */
+#define XCHAL_TIMER2_INTERRUPT		13	/* CCOMPARE2 */
+#define XCHAL_TIMER3_INTERRUPT		XTHAL_TIMER_UNCONFIGURED
+#define XCHAL_NMI_INTERRUPT		14	/* non-maskable interrupt */
+
+/*  Interrupt numbers for levels at which only one interrupt is configured:  */
+#define XCHAL_INTLEVEL2_NUM		8
+#define XCHAL_INTLEVEL4_NUM		12
+#define XCHAL_INTLEVEL5_NUM		13
+#define XCHAL_INTLEVEL7_NUM		14
+/*  (There are many interrupts each at level(s) 1, 3.)  */
+
+
+/*
+ *  External interrupt vectors/levels.
+ *  These macros describe how Xtensa processor interrupt numbers
+ *  (as numbered internally, eg. in INTERRUPT and INTENABLE registers)
+ *  map to external BInterrupt<n> pins, for those interrupts
+ *  configured as external (level-triggered, edge-triggered, or NMI).
+ *  See the Xtensa processor databook for more details.
+ */
+
+/*  Core interrupt numbers mapped to each EXTERNAL interrupt number:  */
+#define XCHAL_EXTINT0_NUM		0	/* (intlevel 1) */
+#define XCHAL_EXTINT1_NUM		1	/* (intlevel 1) */
+#define XCHAL_EXTINT2_NUM		2	/* (intlevel 1) */
+#define XCHAL_EXTINT3_NUM		3	/* (intlevel 1) */
+#define XCHAL_EXTINT4_NUM		4	/* (intlevel 1) */
+#define XCHAL_EXTINT5_NUM		5	/* (intlevel 1) */
+#define XCHAL_EXTINT6_NUM		8	/* (intlevel 2) */
+#define XCHAL_EXTINT7_NUM		9	/* (intlevel 3) */
+#define XCHAL_EXTINT8_NUM		12	/* (intlevel 4) */
+#define XCHAL_EXTINT9_NUM		14	/* (intlevel 7) */
+#define XCHAL_EXTINT10_NUM		15	/* (intlevel 1) */
+#define XCHAL_EXTINT11_NUM		16	/* (intlevel 1) */
+#define XCHAL_EXTINT12_NUM		17	/* (intlevel 1) */
+#define XCHAL_EXTINT13_NUM		18	/* (intlevel 1) */
+#define XCHAL_EXTINT14_NUM		19	/* (intlevel 1) */
+#define XCHAL_EXTINT15_NUM		20	/* (intlevel 1) */
+#define XCHAL_EXTINT16_NUM		21	/* (intlevel 3) */
+
+
+/*----------------------------------------------------------------------
+			EXCEPTIONS and VECTORS
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_XEA_VERSION		2	/* Xtensa Exception Architecture
+						   number: 1 == XEA1 (old)
+							   2 == XEA2 (new)
+							   0 == XEAX (extern) */
+#define XCHAL_HAVE_XEA1			0	/* Exception Architecture 1 */
+#define XCHAL_HAVE_XEA2			1	/* Exception Architecture 2 */
+#define XCHAL_HAVE_XEAX			0	/* External Exception Arch. */
+#define XCHAL_HAVE_EXCEPTIONS		1	/* exception option */
+#define XCHAL_HAVE_MEM_ECC_PARITY	0	/* local memory ECC/parity */
+#define XCHAL_HAVE_VECTOR_SELECT	1	/* relocatable vectors */
+#define XCHAL_HAVE_VECBASE		1	/* relocatable vectors */
+#define XCHAL_VECBASE_RESET_VADDR	0xD0000000  /* VECBASE reset value */
+#define XCHAL_VECBASE_RESET_PADDR	0x00000000
+#define XCHAL_RESET_VECBASE_OVERLAP	0
+
+#define XCHAL_RESET_VECTOR0_VADDR	0xFE000000
+#define XCHAL_RESET_VECTOR0_PADDR	0xFE000000
+#define XCHAL_RESET_VECTOR1_VADDR	0xD8000500
+#define XCHAL_RESET_VECTOR1_PADDR	0x00000500
+#define XCHAL_RESET_VECTOR_VADDR	0xFE000000
+#define XCHAL_RESET_VECTOR_PADDR	0xFE000000
+#define XCHAL_USER_VECOFS		0x00000340
+#define XCHAL_USER_VECTOR_VADDR		0xD0000340
+#define XCHAL_USER_VECTOR_PADDR		0x00000340
+#define XCHAL_KERNEL_VECOFS		0x00000300
+#define XCHAL_KERNEL_VECTOR_VADDR	0xD0000300
+#define XCHAL_KERNEL_VECTOR_PADDR	0x00000300
+#define XCHAL_DOUBLEEXC_VECOFS		0x000003C0
+#define XCHAL_DOUBLEEXC_VECTOR_VADDR	0xD00003C0
+#define XCHAL_DOUBLEEXC_VECTOR_PADDR	0x000003C0
+#define XCHAL_WINDOW_OF4_VECOFS		0x00000000
+#define XCHAL_WINDOW_UF4_VECOFS		0x00000040
+#define XCHAL_WINDOW_OF8_VECOFS		0x00000080
+#define XCHAL_WINDOW_UF8_VECOFS		0x000000C0
+#define XCHAL_WINDOW_OF12_VECOFS	0x00000100
+#define XCHAL_WINDOW_UF12_VECOFS	0x00000140
+#define XCHAL_WINDOW_VECTORS_VADDR	0xD0000000
+#define XCHAL_WINDOW_VECTORS_PADDR	0x00000000
+#define XCHAL_INTLEVEL2_VECOFS		0x00000180
+#define XCHAL_INTLEVEL2_VECTOR_VADDR	0xD0000180
+#define XCHAL_INTLEVEL2_VECTOR_PADDR	0x00000180
+#define XCHAL_INTLEVEL3_VECOFS		0x000001C0
+#define XCHAL_INTLEVEL3_VECTOR_VADDR	0xD00001C0
+#define XCHAL_INTLEVEL3_VECTOR_PADDR	0x000001C0
+#define XCHAL_INTLEVEL4_VECOFS		0x00000200
+#define XCHAL_INTLEVEL4_VECTOR_VADDR	0xD0000200
+#define XCHAL_INTLEVEL4_VECTOR_PADDR	0x00000200
+#define XCHAL_INTLEVEL5_VECOFS		0x00000240
+#define XCHAL_INTLEVEL5_VECTOR_VADDR	0xD0000240
+#define XCHAL_INTLEVEL5_VECTOR_PADDR	0x00000240
+#define XCHAL_INTLEVEL6_VECOFS		0x00000280
+#define XCHAL_INTLEVEL6_VECTOR_VADDR	0xD0000280
+#define XCHAL_INTLEVEL6_VECTOR_PADDR	0x00000280
+#define XCHAL_DEBUG_VECOFS		XCHAL_INTLEVEL6_VECOFS
+#define XCHAL_DEBUG_VECTOR_VADDR	XCHAL_INTLEVEL6_VECTOR_VADDR
+#define XCHAL_DEBUG_VECTOR_PADDR	XCHAL_INTLEVEL6_VECTOR_PADDR
+#define XCHAL_NMI_VECOFS		0x000002C0
+#define XCHAL_NMI_VECTOR_VADDR		0xD00002C0
+#define XCHAL_NMI_VECTOR_PADDR		0x000002C0
+#define XCHAL_INTLEVEL7_VECOFS		XCHAL_NMI_VECOFS
+#define XCHAL_INTLEVEL7_VECTOR_VADDR	XCHAL_NMI_VECTOR_VADDR
+#define XCHAL_INTLEVEL7_VECTOR_PADDR	XCHAL_NMI_VECTOR_PADDR
+
+
+/*----------------------------------------------------------------------
+				DEBUG
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_OCD			1	/* OnChipDebug option */
+#define XCHAL_NUM_IBREAK		2	/* number of IBREAKn regs */
+#define XCHAL_NUM_DBREAK		2	/* number of DBREAKn regs */
+#define XCHAL_HAVE_OCD_DIR_ARRAY	1	/* faster OCD option */
+
+
+/*----------------------------------------------------------------------
+				MMU
+  ----------------------------------------------------------------------*/
+
+/*  See core-matmap.h header file for more details.  */
+
+#define XCHAL_HAVE_TLBS			1	/* inverse of HAVE_CACHEATTR */
+#define XCHAL_HAVE_SPANNING_WAY		0	/* one way maps I+D 4GB vaddr */
+#define XCHAL_HAVE_IDENTITY_MAP		0	/* vaddr == paddr always */
+#define XCHAL_HAVE_CACHEATTR		0	/* CACHEATTR register present */
+#define XCHAL_HAVE_MIMIC_CACHEATTR	0	/* region protection */
+#define XCHAL_HAVE_XLT_CACHEATTR	0	/* region prot. w/translation */
+#define XCHAL_HAVE_PTP_MMU		1	/* full MMU (with page table
+						   [autorefill] and protection)
+						   usable for an MMU-based OS */
+/*  If none of the above last 4 are set, it's a custom TLB configuration.  */
+#define XCHAL_ITLB_ARF_ENTRIES_LOG2	2	/* log2(autorefill way size) */
+#define XCHAL_DTLB_ARF_ENTRIES_LOG2	2	/* log2(autorefill way size) */
+
+#define XCHAL_MMU_ASID_BITS		8	/* number of bits in ASIDs */
+#define XCHAL_MMU_RINGS			4	/* number of rings (1..4) */
+#define XCHAL_MMU_RING_BITS		2	/* num of bits in RING field */
+
+#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */
+
+
+#endif /* _XTENSA_CORE_CONFIGURATION_H */
+
diff --git a/arch/xtensa/variants/dc232b/include/variant/tie-asm.h b/arch/xtensa/variants/dc232b/include/variant/tie-asm.h
new file mode 100644
index 00000000..ed4f53f5
--- /dev/null
+++ b/arch/xtensa/variants/dc232b/include/variant/tie-asm.h
@@ -0,0 +1,122 @@
+/*
+ * This header file contains assembly-language definitions (assembly
+ * macros, etc.) for this specific Xtensa processor's TIE extensions
+ * and options.  It is customized to this Xtensa processor configuration.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999-2007 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_CORE_TIE_ASM_H
+#define _XTENSA_CORE_TIE_ASM_H
+
+/*  Selection parameter values for save-area save/restore macros:  */
+/*  Option vs. TIE:  */
+#define XTHAL_SAS_TIE	0x0001	/* custom extension or coprocessor */
+#define XTHAL_SAS_OPT	0x0002	/* optional (and not a coprocessor) */
+/*  Whether used automatically by compiler:  */
+#define XTHAL_SAS_NOCC	0x0004	/* not used by compiler w/o special opts/code */
+#define XTHAL_SAS_CC	0x0008	/* used by compiler without special opts/code */
+/*  ABI handling across function calls:  */
+#define XTHAL_SAS_CALR	0x0010	/* caller-saved */
+#define XTHAL_SAS_CALE	0x0020	/* callee-saved */
+#define XTHAL_SAS_GLOB	0x0040	/* global across function calls (in thread) */
+/*  Misc  */
+#define XTHAL_SAS_ALL	0xFFFF	/* include all default NCP contents */
+
+
+
+/* Macro to save all non-coprocessor (extra) custom TIE and optional state
+ * (not including zero-overhead loop registers).
+ * Save area ptr (clobbered):  ptr  (1 byte aligned)
+ * Scratch regs  (clobbered):  at1..at4  (only first XCHAL_NCP_NUM_ATMPS needed)
+ */
+	.macro xchal_ncp_store  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL
+	xchal_sa_start	\continue, \ofs
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~\select
+	xchal_sa_align	\ptr, 0, 1024-8, 4, 4
+	rsr	\at1, ACCLO		// MAC16 accumulator
+	rsr	\at2, ACCHI
+	s32i	\at1, \ptr, .Lxchal_ofs_ + 0
+	s32i	\at2, \ptr, .Lxchal_ofs_ + 4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 8
+	.endif
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
+	xchal_sa_align	\ptr, 0, 1024-16, 4, 4
+	rsr	\at1, M0		// MAC16 registers
+	rsr	\at2, M1
+	s32i	\at1, \ptr, .Lxchal_ofs_ + 0
+	s32i	\at2, \ptr, .Lxchal_ofs_ + 4
+	rsr	\at1, M2
+	rsr	\at2, M3
+	s32i	\at1, \ptr, .Lxchal_ofs_ + 8
+	s32i	\at2, \ptr, .Lxchal_ofs_ + 12
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 16
+	.endif
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
+	xchal_sa_align	\ptr, 0, 1024-4, 4, 4
+	rsr	\at1, SCOMPARE1		// conditional store option
+	s32i	\at1, \ptr, .Lxchal_ofs_ + 0
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.endif
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~\select
+	xchal_sa_align	\ptr, 0, 1024-4, 4, 4
+	rur	\at1, THREADPTR		// threadptr option
+	s32i	\at1, \ptr, .Lxchal_ofs_ + 0
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.endif
+	.endm	// xchal_ncp_store
+
+/* Macro to save all non-coprocessor (extra) custom TIE and optional state
+ * (not including zero-overhead loop registers).
+ * Save area ptr (clobbered):  ptr  (1 byte aligned)
+ * Scratch regs  (clobbered):  at1..at4  (only first XCHAL_NCP_NUM_ATMPS needed)
+ */
+	.macro xchal_ncp_load  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL
+	xchal_sa_start	\continue, \ofs
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~\select
+	xchal_sa_align	\ptr, 0, 1024-8, 4, 4
+	l32i	\at1, \ptr, .Lxchal_ofs_ + 0
+	l32i	\at2, \ptr, .Lxchal_ofs_ + 4
+	wsr	\at1, ACCLO		// MAC16 accumulator
+	wsr	\at2, ACCHI
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 8
+	.endif
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
+	xchal_sa_align	\ptr, 0, 1024-16, 4, 4
+	l32i	\at1, \ptr, .Lxchal_ofs_ + 0
+	l32i	\at2, \ptr, .Lxchal_ofs_ + 4
+	wsr	\at1, M0		// MAC16 registers
+	wsr	\at2, M1
+	l32i	\at1, \ptr, .Lxchal_ofs_ + 8
+	l32i	\at2, \ptr, .Lxchal_ofs_ + 12
+	wsr	\at1, M2
+	wsr	\at2, M3
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 16
+	.endif
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
+	xchal_sa_align	\ptr, 0, 1024-4, 4, 4
+	l32i	\at1, \ptr, .Lxchal_ofs_ + 0
+	wsr	\at1, SCOMPARE1		// conditional store option
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.endif
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~\select
+	xchal_sa_align	\ptr, 0, 1024-4, 4, 4
+	l32i	\at1, \ptr, .Lxchal_ofs_ + 0
+	wur	\at1, THREADPTR		// threadptr option
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.endif
+	.endm	// xchal_ncp_load
+
+
+
+#define XCHAL_NCP_NUM_ATMPS	2
+
+
+#define XCHAL_SA_NUM_ATMPS	2
+
+#endif /*_XTENSA_CORE_TIE_ASM_H*/
+
diff --git a/arch/xtensa/variants/dc232b/include/variant/tie.h b/arch/xtensa/variants/dc232b/include/variant/tie.h
new file mode 100644
index 00000000..018e81af
--- /dev/null
+++ b/arch/xtensa/variants/dc232b/include/variant/tie.h
@@ -0,0 +1,131 @@
+/*
+ * This header file describes this specific Xtensa processor's TIE extensions
+ * that extend basic Xtensa core functionality.  It is customized to this
+ * Xtensa processor configuration.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999-2007 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_CORE_TIE_H
+#define _XTENSA_CORE_TIE_H
+
+#define XCHAL_CP_NUM			1	/* number of coprocessors */
+#define XCHAL_CP_MAX			8	/* max CP ID + 1 (0 if none) */
+#define XCHAL_CP_MASK			0x80	/* bitmask of all CPs by ID */
+#define XCHAL_CP_PORT_MASK		0x80	/* bitmask of only port CPs */
+
+/*  Basic parameters of each coprocessor:  */
+#define XCHAL_CP7_NAME			"XTIOP"
+#define XCHAL_CP7_IDENT			XTIOP
+#define XCHAL_CP7_SA_SIZE		0	/* size of state save area */
+#define XCHAL_CP7_SA_ALIGN		1	/* min alignment of save area */
+#define XCHAL_CP_ID_XTIOP		7	/* coprocessor ID (0..7) */
+
+/*  Filler info for unassigned coprocessors, to simplify arrays etc:  */
+#define XCHAL_CP0_SA_SIZE		0
+#define XCHAL_CP0_SA_ALIGN		1
+#define XCHAL_CP1_SA_SIZE		0
+#define XCHAL_CP1_SA_ALIGN		1
+#define XCHAL_CP2_SA_SIZE		0
+#define XCHAL_CP2_SA_ALIGN		1
+#define XCHAL_CP3_SA_SIZE		0
+#define XCHAL_CP3_SA_ALIGN		1
+#define XCHAL_CP4_SA_SIZE		0
+#define XCHAL_CP4_SA_ALIGN		1
+#define XCHAL_CP5_SA_SIZE		0
+#define XCHAL_CP5_SA_ALIGN		1
+#define XCHAL_CP6_SA_SIZE		0
+#define XCHAL_CP6_SA_ALIGN		1
+
+/*  Save area for non-coprocessor optional and custom (TIE) state:  */
+#define XCHAL_NCP_SA_SIZE		32
+#define XCHAL_NCP_SA_ALIGN		4
+
+/*  Total save area for optional and custom state (NCP + CPn):  */
+#define XCHAL_TOTAL_SA_SIZE		32	/* with 16-byte align padding */
+#define XCHAL_TOTAL_SA_ALIGN		4	/* actual minimum alignment */
+
+/*
+ * Detailed contents of save areas.
+ * NOTE:  caller must define the XCHAL_SA_REG macro (not defined here)
+ * before expanding the XCHAL_xxx_SA_LIST() macros.
+ *
+ * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize,
+ *		dbnum,base,regnum,bitsz,gapsz,reset,x...)
+ *
+ *	s = passed from XCHAL_*_LIST(s), eg. to select how to expand
+ *	ccused = set if used by compiler without special options or code
+ *	abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global)
+ *	kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg)
+ *	opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg)
+ *	name = lowercase reg name (no quotes)
+ *	galign = group byte alignment (power of 2) (galign >= align)
+ *	align = register byte alignment (power of 2)
+ *	asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz)
+ *	  (not including any pad bytes required to galign this or next reg)
+ *	dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>)
+ *	base = reg shortname w/o index (or sr=special, ur=TIE user reg)
+ *	regnum = reg index in regfile, or special/TIE-user reg number
+ *	bitsz = number of significant bits (regfile width, or ur/sr mask bits)
+ *	gapsz = intervening bits, if bitsz bits not stored contiguously
+ *	(padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize)
+ *	reset = register reset value (or 0 if undefined at reset)
+ *	x = reserved for future use (0 until then)
+ *
+ *  To filter out certain registers, e.g. to expand only the non-global
+ *  registers used by the compiler, you can do something like this:
+ *
+ *  #define XCHAL_SA_REG(s,ccused,p...)	SELCC##ccused(p)
+ *  #define SELCC0(p...)
+ *  #define SELCC1(abikind,p...)	SELAK##abikind(p)
+ *  #define SELAK0(p...)		REG(p)
+ *  #define SELAK1(p...)		REG(p)
+ *  #define SELAK2(p...)
+ *  #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \
+ *		...what you want to expand...
+ */
+
+#define XCHAL_NCP_SA_NUM	8
+#define XCHAL_NCP_SA_LIST(s)	\
+ XCHAL_SA_REG(s,1,0,0,1,          acclo, 4, 4, 4,0x0210,  sr,16 , 32,0,0,0) \
+ XCHAL_SA_REG(s,1,0,0,1,          acchi, 4, 4, 4,0x0211,  sr,17 ,  8,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m0, 4, 4, 4,0x0220,  sr,32 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m1, 4, 4, 4,0x0221,  sr,33 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m2, 4, 4, 4,0x0222,  sr,34 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m3, 4, 4, 4,0x0223,  sr,35 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,      scompare1, 4, 4, 4,0x020C,  sr,12 , 32,0,0,0) \
+ XCHAL_SA_REG(s,1,2,1,1,      threadptr, 4, 4, 4,0x03E7,  ur,231, 32,0,0,0)
+
+#define XCHAL_CP0_SA_NUM	0
+#define XCHAL_CP0_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP1_SA_NUM	0
+#define XCHAL_CP1_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP2_SA_NUM	0
+#define XCHAL_CP2_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP3_SA_NUM	0
+#define XCHAL_CP3_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP4_SA_NUM	0
+#define XCHAL_CP4_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP5_SA_NUM	0
+#define XCHAL_CP5_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP6_SA_NUM	0
+#define XCHAL_CP6_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP7_SA_NUM	0
+#define XCHAL_CP7_SA_LIST(s)	/* empty */
+
+/* Byte length of instruction from its first nibble (op0 field), per FLIX.  */
+#define XCHAL_OP0_FORMAT_LENGTHS	3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3
+
+#endif /*_XTENSA_CORE_TIE_H*/
+
diff --git a/arch/xtensa/variants/fsf/include/variant/core.h b/arch/xtensa/variants/fsf/include/variant/core.h
new file mode 100644
index 00000000..2f337605
--- /dev/null
+++ b/arch/xtensa/variants/fsf/include/variant/core.h
@@ -0,0 +1,359 @@
+/*
+ * Xtensa processor core configuration information.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999-2006 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_CORE_H
+#define _XTENSA_CORE_H
+
+
+/****************************************************************************
+	    Parameters Useful for Any Code, USER or PRIVILEGED
+ ****************************************************************************/
+
+/*
+ *  Note:  Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is
+ *  configured, and a value of 0 otherwise.  These macros are always defined.
+ */
+
+
+/*----------------------------------------------------------------------
+				ISA
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_BE			1	/* big-endian byte ordering */
+#define XCHAL_HAVE_WINDOWED		1	/* windowed registers option */
+#define XCHAL_NUM_AREGS			64	/* num of physical addr regs */
+#define XCHAL_NUM_AREGS_LOG2		6	/* log2(XCHAL_NUM_AREGS) */
+#define XCHAL_MAX_INSTRUCTION_SIZE	3	/* max instr bytes (3..8) */
+#define XCHAL_HAVE_DEBUG		1	/* debug option */
+#define XCHAL_HAVE_DENSITY		1	/* 16-bit instructions */
+#define XCHAL_HAVE_LOOPS		1	/* zero-overhead loops */
+#define XCHAL_HAVE_NSA			1	/* NSA/NSAU instructions */
+#define XCHAL_HAVE_MINMAX		0	/* MIN/MAX instructions */
+#define XCHAL_HAVE_SEXT			0	/* SEXT instruction */
+#define XCHAL_HAVE_CLAMPS		0	/* CLAMPS instruction */
+#define XCHAL_HAVE_MUL16		0	/* MUL16S/MUL16U instructions */
+#define XCHAL_HAVE_MUL32		0	/* MULL instruction */
+#define XCHAL_HAVE_MUL32_HIGH		0	/* MULUH/MULSH instructions */
+#define XCHAL_HAVE_L32R			1	/* L32R instruction */
+#define XCHAL_HAVE_ABSOLUTE_LITERALS	1	/* non-PC-rel (extended) L32R */
+#define XCHAL_HAVE_CONST16		0	/* CONST16 instruction */
+#define XCHAL_HAVE_ADDX			1	/* ADDX#/SUBX# instructions */
+#define XCHAL_HAVE_WIDE_BRANCHES	0	/* B*.W18 or B*.W15 instr's */
+#define XCHAL_HAVE_PREDICTED_BRANCHES	0	/* B[EQ/EQZ/NE/NEZ]T instr's */
+#define XCHAL_HAVE_CALL4AND12		1	/* (obsolete option) */
+#define XCHAL_HAVE_ABS			1	/* ABS instruction */
+/*#define XCHAL_HAVE_POPC		0*/	/* POPC instruction */
+/*#define XCHAL_HAVE_CRC		0*/	/* CRC instruction */
+#define XCHAL_HAVE_RELEASE_SYNC		0	/* L32AI/S32RI instructions */
+#define XCHAL_HAVE_S32C1I		0	/* S32C1I instruction */
+#define XCHAL_HAVE_SPECULATION		0	/* speculation */
+#define XCHAL_HAVE_FULL_RESET		1	/* all regs/state reset */
+#define XCHAL_NUM_CONTEXTS		1	/* */
+#define XCHAL_NUM_MISC_REGS		2	/* num of scratch regs (0..4) */
+#define XCHAL_HAVE_TAP_MASTER		0	/* JTAG TAP control instr's */
+#define XCHAL_HAVE_PRID			1	/* processor ID register */
+#define XCHAL_HAVE_THREADPTR		1	/* THREADPTR register */
+#define XCHAL_HAVE_BOOLEANS		0	/* boolean registers */
+#define XCHAL_HAVE_CP			0	/* CPENABLE reg (coprocessor) */
+#define XCHAL_CP_MAXCFG			0	/* max allowed cp id plus one */
+#define XCHAL_HAVE_MAC16		0	/* MAC16 package */
+#define XCHAL_HAVE_VECTORFPU2005	0	/* vector floating-point pkg */
+#define XCHAL_HAVE_FP			0	/* floating point pkg */
+#define XCHAL_HAVE_VECTRA1		0	/* Vectra I  pkg */
+#define XCHAL_HAVE_VECTRALX		0	/* Vectra LX pkg */
+#define XCHAL_HAVE_HIFI2		0	/* HiFi2 Audio Engine pkg */
+
+
+/*----------------------------------------------------------------------
+				MISC
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_WRITEBUFFER_ENTRIES	4	/* size of write buffer */
+#define XCHAL_INST_FETCH_WIDTH		4	/* instr-fetch width in bytes */
+#define XCHAL_DATA_WIDTH		4	/* data width in bytes */
+/*  In T1050, applies to selected core load and store instructions (see ISA): */
+#define XCHAL_UNALIGNED_LOAD_EXCEPTION	1	/* unaligned loads cause exc. */
+#define XCHAL_UNALIGNED_STORE_EXCEPTION	1	/* unaligned stores cause exc.*/
+
+#define XCHAL_CORE_ID			"fsf"	/* alphanum core name
+						   (CoreID) set in the Xtensa
+						   Processor Generator */
+
+#define XCHAL_BUILD_UNIQUE_ID		0x00006700	/* 22-bit sw build ID */
+
+/*
+ *  These definitions describe the hardware targeted by this software.
+ */
+#define XCHAL_HW_CONFIGID0		0xC103C3FF	/* ConfigID hi 32 bits*/
+#define XCHAL_HW_CONFIGID1		0x0C006700	/* ConfigID lo 32 bits*/
+#define XCHAL_HW_VERSION_NAME		"LX2.0.0"	/* full version name */
+#define XCHAL_HW_VERSION_MAJOR		2200	/* major ver# of targeted hw */
+#define XCHAL_HW_VERSION_MINOR		0	/* minor ver# of targeted hw */
+#define XTHAL_HW_REL_LX2		1
+#define XTHAL_HW_REL_LX2_0		1
+#define XTHAL_HW_REL_LX2_0_0		1
+#define XCHAL_HW_CONFIGID_RELIABLE	1
+/*  If software targets a *range* of hardware versions, these are the bounds: */
+#define XCHAL_HW_MIN_VERSION_MAJOR	2200	/* major v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION_MINOR	0	/* minor v of earliest tgt hw */
+#define XCHAL_HW_MAX_VERSION_MAJOR	2200	/* major v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION_MINOR	0	/* minor v of latest tgt hw */
+
+
+/*----------------------------------------------------------------------
+				CACHE
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_ICACHE_LINESIZE		16	/* I-cache line size in bytes */
+#define XCHAL_DCACHE_LINESIZE		16	/* D-cache line size in bytes */
+#define XCHAL_ICACHE_LINEWIDTH		4	/* log2(I line size in bytes) */
+#define XCHAL_DCACHE_LINEWIDTH		4	/* log2(D line size in bytes) */
+
+#define XCHAL_ICACHE_SIZE		8192	/* I-cache size in bytes or 0 */
+#define XCHAL_DCACHE_SIZE		8192	/* D-cache size in bytes or 0 */
+
+#define XCHAL_DCACHE_IS_WRITEBACK	0	/* writeback feature */
+
+
+
+
+/****************************************************************************
+    Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code
+ ****************************************************************************/
+
+
+#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY
+
+/*----------------------------------------------------------------------
+				CACHE
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_PIF			1	/* any outbound PIF present */
+
+/*  If present, cache size in bytes == (ways * 2^(linewidth + setwidth)).  */
+
+/*  Number of cache sets in log2(lines per way):  */
+#define XCHAL_ICACHE_SETWIDTH		8
+#define XCHAL_DCACHE_SETWIDTH		8
+
+/*  Cache set associativity (number of ways):  */
+#define XCHAL_ICACHE_WAYS		2
+#define XCHAL_DCACHE_WAYS		2
+
+/*  Cache features:  */
+#define XCHAL_ICACHE_LINE_LOCKABLE	0
+#define XCHAL_DCACHE_LINE_LOCKABLE	0
+#define XCHAL_ICACHE_ECC_PARITY		0
+#define XCHAL_DCACHE_ECC_PARITY		0
+
+/*  Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits):  */
+#define XCHAL_CA_BITS			4
+
+
+/*----------------------------------------------------------------------
+			INTERNAL I/D RAM/ROMs and XLMI
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_INSTROM		0	/* number of core instr. ROMs */
+#define XCHAL_NUM_INSTRAM		0	/* number of core instr. RAMs */
+#define XCHAL_NUM_DATAROM		0	/* number of core data ROMs */
+#define XCHAL_NUM_DATARAM		0	/* number of core data RAMs */
+#define XCHAL_NUM_URAM			0	/* number of core unified RAMs*/
+#define XCHAL_NUM_XLMI			0	/* number of core XLMI ports */
+
+
+/*----------------------------------------------------------------------
+			INTERRUPTS and TIMERS
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_INTERRUPTS		1	/* interrupt option */
+#define XCHAL_HAVE_HIGHPRI_INTERRUPTS	1	/* med/high-pri. interrupts */
+#define XCHAL_HAVE_NMI			0	/* non-maskable interrupt */
+#define XCHAL_HAVE_CCOUNT		1	/* CCOUNT reg. (timer option) */
+#define XCHAL_NUM_TIMERS		3	/* number of CCOMPAREn regs */
+#define XCHAL_NUM_INTERRUPTS		17	/* number of interrupts */
+#define XCHAL_NUM_INTERRUPTS_LOG2	5	/* ceil(log2(NUM_INTERRUPTS)) */
+#define XCHAL_NUM_EXTINTERRUPTS		10	/* num of external interrupts */
+#define XCHAL_NUM_INTLEVELS		4	/* number of interrupt levels
+						   (not including level zero) */
+#define XCHAL_EXCM_LEVEL		1	/* level masked by PS.EXCM */
+	/* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */
+
+/*  Masks of interrupts at each interrupt level:  */
+#define XCHAL_INTLEVEL1_MASK		0x000064F9
+#define XCHAL_INTLEVEL2_MASK		0x00008902
+#define XCHAL_INTLEVEL3_MASK		0x00011204
+#define XCHAL_INTLEVEL4_MASK		0x00000000
+#define XCHAL_INTLEVEL5_MASK		0x00000000
+#define XCHAL_INTLEVEL6_MASK		0x00000000
+#define XCHAL_INTLEVEL7_MASK		0x00000000
+
+/*  Masks of interrupts at each range 1..n of interrupt levels:  */
+#define XCHAL_INTLEVEL1_ANDBELOW_MASK	0x000064F9
+#define XCHAL_INTLEVEL2_ANDBELOW_MASK	0x0000EDFB
+#define XCHAL_INTLEVEL3_ANDBELOW_MASK	0x0001FFFF
+#define XCHAL_INTLEVEL4_ANDBELOW_MASK	0x0001FFFF
+#define XCHAL_INTLEVEL5_ANDBELOW_MASK	0x0001FFFF
+#define XCHAL_INTLEVEL6_ANDBELOW_MASK	0x0001FFFF
+#define XCHAL_INTLEVEL7_ANDBELOW_MASK	0x0001FFFF
+
+/*  Level of each interrupt:  */
+#define XCHAL_INT0_LEVEL		1
+#define XCHAL_INT1_LEVEL		2
+#define XCHAL_INT2_LEVEL		3
+#define XCHAL_INT3_LEVEL		1
+#define XCHAL_INT4_LEVEL		1
+#define XCHAL_INT5_LEVEL		1
+#define XCHAL_INT6_LEVEL		1
+#define XCHAL_INT7_LEVEL		1
+#define XCHAL_INT8_LEVEL		2
+#define XCHAL_INT9_LEVEL		3
+#define XCHAL_INT10_LEVEL		1
+#define XCHAL_INT11_LEVEL		2
+#define XCHAL_INT12_LEVEL		3
+#define XCHAL_INT13_LEVEL		1
+#define XCHAL_INT14_LEVEL		1
+#define XCHAL_INT15_LEVEL		2
+#define XCHAL_INT16_LEVEL		3
+#define XCHAL_DEBUGLEVEL		4	/* debug interrupt level */
+#define XCHAL_HAVE_DEBUG_EXTERN_INT	0	/* OCD external db interrupt */
+
+/*  Type of each interrupt:  */
+#define XCHAL_INT0_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT1_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT2_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT3_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT4_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT5_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT6_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT7_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT8_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT9_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT10_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT11_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT12_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT13_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT14_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT15_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT16_TYPE 	XTHAL_INTTYPE_SOFTWARE
+
+/*  Masks of interrupts for each type of interrupt:  */
+#define XCHAL_INTTYPE_MASK_UNCONFIGURED	0xFFFE0000
+#define XCHAL_INTTYPE_MASK_SOFTWARE	0x0001E000
+#define XCHAL_INTTYPE_MASK_EXTERN_EDGE	0x00000380
+#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL	0x0000007F
+#define XCHAL_INTTYPE_MASK_TIMER	0x00001C00
+#define XCHAL_INTTYPE_MASK_NMI		0x00000000
+#define XCHAL_INTTYPE_MASK_WRITE_ERROR	0x00000000
+
+/*  Interrupt numbers assigned to specific interrupt sources:  */
+#define XCHAL_TIMER0_INTERRUPT		10	/* CCOMPARE0 */
+#define XCHAL_TIMER1_INTERRUPT		11	/* CCOMPARE1 */
+#define XCHAL_TIMER2_INTERRUPT		12	/* CCOMPARE2 */
+#define XCHAL_TIMER3_INTERRUPT		XTHAL_TIMER_UNCONFIGURED
+
+/*  Interrupt numbers for levels at which only one interrupt is configured:  */
+/*  (There are many interrupts each at level(s) 1, 2, 3.)  */
+
+
+/*
+ *  External interrupt vectors/levels.
+ *  These macros describe how Xtensa processor interrupt numbers
+ *  (as numbered internally, eg. in INTERRUPT and INTENABLE registers)
+ *  map to external BInterrupt<n> pins, for those interrupts
+ *  configured as external (level-triggered, edge-triggered, or NMI).
+ *  See the Xtensa processor databook for more details.
+ */
+
+/*  Core interrupt numbers mapped to each EXTERNAL interrupt number:  */
+#define XCHAL_EXTINT0_NUM		0	/* (intlevel 1) */
+#define XCHAL_EXTINT1_NUM		1	/* (intlevel 2) */
+#define XCHAL_EXTINT2_NUM		2	/* (intlevel 3) */
+#define XCHAL_EXTINT3_NUM		3	/* (intlevel 1) */
+#define XCHAL_EXTINT4_NUM		4	/* (intlevel 1) */
+#define XCHAL_EXTINT5_NUM		5	/* (intlevel 1) */
+#define XCHAL_EXTINT6_NUM		6	/* (intlevel 1) */
+#define XCHAL_EXTINT7_NUM		7	/* (intlevel 1) */
+#define XCHAL_EXTINT8_NUM		8	/* (intlevel 2) */
+#define XCHAL_EXTINT9_NUM		9	/* (intlevel 3) */
+
+
+/*----------------------------------------------------------------------
+			EXCEPTIONS and VECTORS
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_XEA_VERSION		2	/* Xtensa Exception Architecture
+						   number: 1 == XEA1 (old)
+							   2 == XEA2 (new)
+							   0 == XEAX (extern) */
+#define XCHAL_HAVE_XEA1			0	/* Exception Architecture 1 */
+#define XCHAL_HAVE_XEA2			1	/* Exception Architecture 2 */
+#define XCHAL_HAVE_XEAX			0	/* External Exception Arch. */
+#define XCHAL_HAVE_EXCEPTIONS		1	/* exception option */
+#define XCHAL_HAVE_MEM_ECC_PARITY	0	/* local memory ECC/parity */
+
+#define XCHAL_RESET_VECTOR_VADDR	0xFE000020
+#define XCHAL_RESET_VECTOR_PADDR	0xFE000020
+#define XCHAL_USER_VECTOR_VADDR		0xD0000220
+#define XCHAL_USER_VECTOR_PADDR		0x00000220
+#define XCHAL_KERNEL_VECTOR_VADDR	0xD0000200
+#define XCHAL_KERNEL_VECTOR_PADDR	0x00000200
+#define XCHAL_DOUBLEEXC_VECTOR_VADDR	0xD0000290
+#define XCHAL_DOUBLEEXC_VECTOR_PADDR	0x00000290
+#define XCHAL_WINDOW_VECTORS_VADDR	0xD0000000
+#define XCHAL_WINDOW_VECTORS_PADDR	0x00000000
+#define XCHAL_INTLEVEL2_VECTOR_VADDR	0xD0000240
+#define XCHAL_INTLEVEL2_VECTOR_PADDR	0x00000240
+#define XCHAL_INTLEVEL3_VECTOR_VADDR	0xD0000250
+#define XCHAL_INTLEVEL3_VECTOR_PADDR	0x00000250
+#define XCHAL_INTLEVEL4_VECTOR_VADDR	0xFE000520
+#define XCHAL_INTLEVEL4_VECTOR_PADDR	0xFE000520
+#define XCHAL_DEBUG_VECTOR_VADDR	XCHAL_INTLEVEL4_VECTOR_VADDR
+#define XCHAL_DEBUG_VECTOR_PADDR	XCHAL_INTLEVEL4_VECTOR_PADDR
+
+
+/*----------------------------------------------------------------------
+				DEBUG
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_OCD			1	/* OnChipDebug option */
+#define XCHAL_NUM_IBREAK		2	/* number of IBREAKn regs */
+#define XCHAL_NUM_DBREAK		2	/* number of DBREAKn regs */
+#define XCHAL_HAVE_OCD_DIR_ARRAY	1	/* faster OCD option */
+
+
+/*----------------------------------------------------------------------
+				MMU
+  ----------------------------------------------------------------------*/
+
+/*  See <xtensa/config/core-matmap.h> header file for more details.  */
+
+#define XCHAL_HAVE_TLBS			1	/* inverse of HAVE_CACHEATTR */
+#define XCHAL_HAVE_SPANNING_WAY		0	/* one way maps I+D 4GB vaddr */
+#define XCHAL_HAVE_IDENTITY_MAP		0	/* vaddr == paddr always */
+#define XCHAL_HAVE_CACHEATTR		0	/* CACHEATTR register present */
+#define XCHAL_HAVE_MIMIC_CACHEATTR	0	/* region protection */
+#define XCHAL_HAVE_XLT_CACHEATTR	0	/* region prot. w/translation */
+#define XCHAL_HAVE_PTP_MMU		1	/* full MMU (with page table
+						   [autorefill] and protection)
+						   usable for an MMU-based OS */
+/*  If none of the above last 4 are set, it's a custom TLB configuration.  */
+#define XCHAL_ITLB_ARF_ENTRIES_LOG2	2	/* log2(autorefill way size) */
+#define XCHAL_DTLB_ARF_ENTRIES_LOG2	2	/* log2(autorefill way size) */
+
+#define XCHAL_MMU_ASID_BITS		8	/* number of bits in ASIDs */
+#define XCHAL_MMU_RINGS			4	/* number of rings (1..4) */
+#define XCHAL_MMU_RING_BITS		2	/* num of bits in RING field */
+
+#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */
+
+
+#endif /* _XTENSA_CORE_CONFIGURATION_H */
+
diff --git a/arch/xtensa/variants/fsf/include/variant/tie-asm.h b/arch/xtensa/variants/fsf/include/variant/tie-asm.h
new file mode 100644
index 00000000..68a73bf4
--- /dev/null
+++ b/arch/xtensa/variants/fsf/include/variant/tie-asm.h
@@ -0,0 +1,70 @@
+/*
+ * This header file contains assembly-language definitions (assembly
+ * macros, etc.) for this specific Xtensa processor's TIE extensions
+ * and options.  It is customized to this Xtensa processor configuration.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999-2008 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_CORE_TIE_ASM_H
+#define _XTENSA_CORE_TIE_ASM_H
+
+/*  Selection parameter values for save-area save/restore macros:  */
+/*  Option vs. TIE:  */
+#define XTHAL_SAS_TIE	0x0001	/* custom extension or coprocessor */
+#define XTHAL_SAS_OPT	0x0002	/* optional (and not a coprocessor) */
+/*  Whether used automatically by compiler:  */
+#define XTHAL_SAS_NOCC	0x0004	/* not used by compiler w/o special opts/code */
+#define XTHAL_SAS_CC	0x0008	/* used by compiler without special opts/code */
+/*  ABI handling across function calls:  */
+#define XTHAL_SAS_CALR	0x0010	/* caller-saved */
+#define XTHAL_SAS_CALE	0x0020	/* callee-saved */
+#define XTHAL_SAS_GLOB	0x0040	/* global across function calls (in thread) */
+/*  Misc  */
+#define XTHAL_SAS_ALL	0xFFFF	/* include all default NCP contents */
+
+
+
+/* Macro to save all non-coprocessor (extra) custom TIE and optional state
+ * (not including zero-overhead loop registers).
+ * Save area ptr (clobbered):  ptr  (1 byte aligned)
+ * Scratch regs  (clobbered):  at1..at4  (only first XCHAL_NCP_NUM_ATMPS needed)
+ */
+	.macro xchal_ncp_store  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL
+	xchal_sa_start	\continue, \ofs
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~\select
+	xchal_sa_align	\ptr, 0, 1024-4, 4, 4
+	rur	\at1, THREADPTR		// threadptr option
+	s32i	\at1, \ptr, .Lxchal_ofs_ + 0
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.endif
+	.endm	// xchal_ncp_store
+
+/* Macro to save all non-coprocessor (extra) custom TIE and optional state
+ * (not including zero-overhead loop registers).
+ * Save area ptr (clobbered):  ptr  (1 byte aligned)
+ * Scratch regs  (clobbered):  at1..at4  (only first XCHAL_NCP_NUM_ATMPS needed)
+ */
+	.macro xchal_ncp_load  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL
+	xchal_sa_start	\continue, \ofs
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~\select
+	xchal_sa_align	\ptr, 0, 1024-4, 4, 4
+	l32i	\at1, \ptr, .Lxchal_ofs_ + 0
+	wur	\at1, THREADPTR		// threadptr option
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.endif
+	.endm	// xchal_ncp_load
+
+
+
+#define XCHAL_NCP_NUM_ATMPS	1
+
+
+#define XCHAL_SA_NUM_ATMPS	1
+
+#endif /*_XTENSA_CORE_TIE_ASM_H*/
+
diff --git a/arch/xtensa/variants/fsf/include/variant/tie.h b/arch/xtensa/variants/fsf/include/variant/tie.h
new file mode 100644
index 00000000..bf402011
--- /dev/null
+++ b/arch/xtensa/variants/fsf/include/variant/tie.h
@@ -0,0 +1,77 @@
+/*
+ * This header file describes this specific Xtensa processor's TIE extensions
+ * that extend basic Xtensa core functionality.  It is customized to this
+ * Xtensa processor configuration.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999-2007 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_CORE_TIE_H
+#define _XTENSA_CORE_TIE_H
+
+#define XCHAL_CP_NUM			0	/* number of coprocessors */
+#define XCHAL_CP_MAX			0	/* max CP ID + 1 (0 if none) */
+#define XCHAL_CP_MASK			0x00	/* bitmask of all CPs by ID */
+#define XCHAL_CP_PORT_MASK		0x00	/* bitmask of only port CPs */
+
+/*  Basic parameters of each coprocessor:  */
+#define XCHAL_CP7_NAME			"XTIOP"
+#define XCHAL_CP7_IDENT			XTIOP
+#define XCHAL_CP7_SA_SIZE		0	/* size of state save area */
+#define XCHAL_CP7_SA_ALIGN		1	/* min alignment of save area */
+#define XCHAL_CP_ID_XTIOP		7	/* coprocessor ID (0..7) */
+
+/*  Filler info for unassigned coprocessors, to simplify arrays etc:  */
+#define XCHAL_NCP_SA_SIZE		0
+#define XCHAL_NCP_SA_ALIGN		1
+#define XCHAL_CP0_SA_SIZE		0
+#define XCHAL_CP0_SA_ALIGN		1
+#define XCHAL_CP1_SA_SIZE		0
+#define XCHAL_CP1_SA_ALIGN		1
+#define XCHAL_CP2_SA_SIZE		0
+#define XCHAL_CP2_SA_ALIGN		1
+#define XCHAL_CP3_SA_SIZE		0
+#define XCHAL_CP3_SA_ALIGN		1
+#define XCHAL_CP4_SA_SIZE		0
+#define XCHAL_CP4_SA_ALIGN		1
+#define XCHAL_CP5_SA_SIZE		0
+#define XCHAL_CP5_SA_ALIGN		1
+#define XCHAL_CP6_SA_SIZE		0
+#define XCHAL_CP6_SA_ALIGN		1
+
+/*  Save area for non-coprocessor optional and custom (TIE) state:  */
+#define XCHAL_NCP_SA_SIZE		0
+#define XCHAL_NCP_SA_ALIGN		1
+
+/*  Total save area for optional and custom state (NCP + CPn):  */
+#define XCHAL_TOTAL_SA_SIZE		0	/* with 16-byte align padding */
+#define XCHAL_TOTAL_SA_ALIGN		1	/* actual minimum alignment */
+
+#define XCHAL_NCP_SA_NUM	0
+#define XCHAL_NCP_SA_LIST(s)
+#define XCHAL_CP0_SA_NUM	0
+#define XCHAL_CP0_SA_LIST(s)
+#define XCHAL_CP1_SA_NUM	0
+#define XCHAL_CP1_SA_LIST(s)
+#define XCHAL_CP2_SA_NUM	0
+#define XCHAL_CP2_SA_LIST(s)
+#define XCHAL_CP3_SA_NUM	0
+#define XCHAL_CP3_SA_LIST(s)
+#define XCHAL_CP4_SA_NUM	0
+#define XCHAL_CP4_SA_LIST(s)
+#define XCHAL_CP5_SA_NUM	0
+#define XCHAL_CP5_SA_LIST(s)
+#define XCHAL_CP6_SA_NUM	0
+#define XCHAL_CP6_SA_LIST(s)
+#define XCHAL_CP7_SA_NUM	0
+#define XCHAL_CP7_SA_LIST(s)
+
+/* Byte length of instruction from its first nibble (op0 field), per FLIX.  */
+#define XCHAL_OP0_FORMAT_LENGTHS	3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3
+
+#endif /*_XTENSA_CORE_TIE_H*/
+
diff --git a/arch/xtensa/variants/s6000/Makefile b/arch/xtensa/variants/s6000/Makefile
new file mode 100644
index 00000000..3e7ef0a0
--- /dev/null
+++ b/arch/xtensa/variants/s6000/Makefile
@@ -0,0 +1,4 @@
+# s6000 Makefile
+
+obj-y		+= irq.o gpio.o dmac.o
+obj-$(CONFIG_XTENSA_CALIBRATE_CCOUNT)	+= delay.o
diff --git a/arch/xtensa/variants/s6000/delay.c b/arch/xtensa/variants/s6000/delay.c
new file mode 100644
index 00000000..54b2b573
--- /dev/null
+++ b/arch/xtensa/variants/s6000/delay.c
@@ -0,0 +1,27 @@
+#include <asm/delay.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+#include <variant/hardware.h>
+
+#define LOOPS 10
+void platform_calibrate_ccount(void)
+{
+	u32 uninitialized_var(a);
+	u32 uninitialized_var(u);
+	u32 b;
+	u32 tstamp = S6_REG_GREG1 + S6_GREG1_GLOBAL_TIMER;
+	int i = LOOPS+1;
+	do {
+		u32 t = u;
+		asm volatile(
+		"1:	l32i %0, %2, 0 ;"
+		"	beq %0, %1, 1b ;"
+		: "=&a"(u) : "a"(t), "a"(tstamp));
+		b = xtensa_get_ccount();
+		if (i == LOOPS)
+			a = b;
+	} while (--i >= 0);
+	b -= a;
+	nsec_per_ccount = (LOOPS * 10000) / b;
+	ccount_per_jiffy = b * (100000UL / (LOOPS * HZ));
+}
diff --git a/arch/xtensa/variants/s6000/dmac.c b/arch/xtensa/variants/s6000/dmac.c
new file mode 100644
index 00000000..dc7f7c57
--- /dev/null
+++ b/arch/xtensa/variants/s6000/dmac.c
@@ -0,0 +1,173 @@
+/*
+ * Authors:	Oskar Schirmer <os@emlix.com>
+ *		Daniel Gloeckner <dg@emlix.com>
+ * (c) 2008 emlix GmbH http://www.emlix.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <asm/cacheflush.h>
+#include <variant/dmac.h>
+
+/* DMA engine lookup */
+
+struct s6dmac_ctrl s6dmac_ctrl[S6_DMAC_NB];
+
+
+/* DMA control, per engine */
+
+void s6dmac_put_fifo_cache(u32 dmac, int chan, u32 src, u32 dst, u32 size)
+{
+	if (xtensa_need_flush_dma_source(src)) {
+		u32 base = src;
+		u32 span = size;
+		u32 chunk = readl(DMA_CHNL(dmac, chan) + S6_DMA_CMONCHUNK);
+		if (chunk && (size > chunk)) {
+			s32 skip =
+				readl(DMA_CHNL(dmac, chan) + S6_DMA_SRCSKIP);
+			u32 gaps = (size+chunk-1)/chunk - 1;
+			if (skip >= 0) {
+				span += gaps * skip;
+			} else if (-skip > chunk) {
+				s32 decr = gaps * (chunk + skip);
+				base += decr;
+				span = chunk - decr;
+			} else {
+				span = max(span + gaps * skip,
+					(chunk + skip) * gaps - skip);
+			}
+		}
+		flush_dcache_unaligned(base, span);
+	}
+	if (xtensa_need_invalidate_dma_destination(dst)) {
+		u32 base = dst;
+		u32 span = size;
+		u32 chunk = readl(DMA_CHNL(dmac, chan) + S6_DMA_CMONCHUNK);
+		if (chunk && (size > chunk)) {
+			s32 skip =
+				readl(DMA_CHNL(dmac, chan) + S6_DMA_DSTSKIP);
+			u32 gaps = (size+chunk-1)/chunk - 1;
+			if (skip >= 0) {
+				span += gaps * skip;
+			} else if (-skip > chunk) {
+				s32 decr = gaps * (chunk + skip);
+				base += decr;
+				span = chunk - decr;
+			} else {
+				span = max(span + gaps * skip,
+					(chunk + skip) * gaps - skip);
+			}
+		}
+		invalidate_dcache_unaligned(base, span);
+	}
+	s6dmac_put_fifo(dmac, chan, src, dst, size);
+}
+
+void s6dmac_disable_error_irqs(u32 dmac, u32 mask)
+{
+	unsigned long flags;
+	spinlock_t *spinl = &s6dmac_ctrl[_dmac_addr_index(dmac)].lock;
+	spin_lock_irqsave(spinl, flags);
+	_s6dmac_disable_error_irqs(dmac, mask);
+	spin_unlock_irqrestore(spinl, flags);
+}
+
+u32 s6dmac_int_sources(u32 dmac, u32 channel)
+{
+	u32 mask, ret, tmp;
+	mask = 1 << channel;
+
+	tmp = readl(dmac + S6_DMA_TERMCNTIRQSTAT);
+	tmp &= mask;
+	writel(tmp, dmac + S6_DMA_TERMCNTIRQCLR);
+	ret = tmp >> channel;
+
+	tmp = readl(dmac + S6_DMA_PENDCNTIRQSTAT);
+	tmp &= mask;
+	writel(tmp, dmac + S6_DMA_PENDCNTIRQCLR);
+	ret |= (tmp >> channel) << 1;
+
+	tmp = readl(dmac + S6_DMA_LOWWMRKIRQSTAT);
+	tmp &= mask;
+	writel(tmp, dmac + S6_DMA_LOWWMRKIRQCLR);
+	ret |= (tmp >> channel) << 2;
+
+	tmp = readl(dmac + S6_DMA_INTRAW0);
+	tmp &= (mask << S6_DMA_INT0_OVER) | (mask << S6_DMA_INT0_UNDER);
+	writel(tmp, dmac + S6_DMA_INTCLEAR0);
+
+	if (tmp & (mask << S6_DMA_INT0_UNDER))
+		ret |= 1 << 3;
+	if (tmp & (mask << S6_DMA_INT0_OVER))
+		ret |= 1 << 4;
+
+	tmp = readl(dmac + S6_DMA_MASTERERRINFO);
+	mask <<= S6_DMA_INT1_CHANNEL;
+	if (((tmp >> S6_DMA_MASTERERR_CHAN(0)) & S6_DMA_MASTERERR_CHAN_MASK)
+			== channel)
+		mask |= 1 << S6_DMA_INT1_MASTER;
+	if (((tmp >> S6_DMA_MASTERERR_CHAN(1)) & S6_DMA_MASTERERR_CHAN_MASK)
+			== channel)
+		mask |= 1 << (S6_DMA_INT1_MASTER + 1);
+	if (((tmp >> S6_DMA_MASTERERR_CHAN(2)) & S6_DMA_MASTERERR_CHAN_MASK)
+			== channel)
+		mask |= 1 << (S6_DMA_INT1_MASTER + 2);
+
+	tmp = readl(dmac + S6_DMA_INTRAW1) & mask;
+	writel(tmp, dmac + S6_DMA_INTCLEAR1);
+	ret |= ((tmp >> channel) & 1) << 5;
+	ret |= ((tmp >> S6_DMA_INT1_MASTER) & S6_DMA_INT1_MASTER_MASK) << 6;
+
+	return ret;
+}
+
+void s6dmac_release_chan(u32 dmac, int chan)
+{
+	if (chan >= 0)
+		s6dmac_disable_chan(dmac, chan);
+}
+
+
+/* global init */
+
+static inline void __init dmac_init(u32 dmac, u8 chan_nb)
+{
+	s6dmac_ctrl[S6_DMAC_INDEX(dmac)].dmac = dmac;
+	spin_lock_init(&s6dmac_ctrl[S6_DMAC_INDEX(dmac)].lock);
+	s6dmac_ctrl[S6_DMAC_INDEX(dmac)].chan_nb = chan_nb;
+	writel(S6_DMA_INT1_MASTER_MASK << S6_DMA_INT1_MASTER,
+		dmac + S6_DMA_INTCLEAR1);
+}
+
+static inline void __init dmac_master(u32 dmac,
+	u32 m0start, u32 m0end, u32 m1start, u32 m1end)
+{
+	writel(m0start, dmac + S6_DMA_MASTER0START);
+	writel(m0end - 1, dmac + S6_DMA_MASTER0END);
+	writel(m1start, dmac + S6_DMA_MASTER1START);
+	writel(m1end - 1, dmac + S6_DMA_MASTER1END);
+}
+
+static void __init s6_dmac_init(void)
+{
+	dmac_init(S6_REG_LMSDMA, S6_LMSDMA_NB);
+	dmac_master(S6_REG_LMSDMA,
+		S6_MEM_DDR, S6_MEM_PCIE_APER, S6_MEM_EFI, S6_MEM_GMAC);
+	dmac_init(S6_REG_NIDMA, S6_NIDMA_NB);
+	dmac_init(S6_REG_DPDMA, S6_DPDMA_NB);
+	dmac_master(S6_REG_DPDMA,
+		S6_MEM_DDR, S6_MEM_PCIE_APER, S6_REG_DP, S6_REG_DPDMA);
+	dmac_init(S6_REG_HIFDMA, S6_HIFDMA_NB);
+	dmac_master(S6_REG_HIFDMA,
+		S6_MEM_GMAC, S6_MEM_PCIE_CFG, S6_MEM_PCIE_APER, S6_MEM_AUX);
+}
+
+arch_initcall(s6_dmac_init);
diff --git a/arch/xtensa/variants/s6000/gpio.c b/arch/xtensa/variants/s6000/gpio.c
new file mode 100644
index 00000000..7af0757e
--- /dev/null
+++ b/arch/xtensa/variants/s6000/gpio.c
@@ -0,0 +1,230 @@
+/*
+ * s6000 gpio driver
+ *
+ * Copyright (c) 2009 emlix GmbH
+ * Authors:	Oskar Schirmer <os@emlix.com>
+ *		Johannes Weiner <jw@emlix.com>
+ *		Daniel Gloeckner <dg@emlix.com>
+ */
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <variant/hardware.h>
+
+#define IRQ_BASE XTENSA_NR_IRQS
+
+#define S6_GPIO_DATA		0x000
+#define S6_GPIO_IS		0x404
+#define S6_GPIO_IBE		0x408
+#define S6_GPIO_IEV		0x40C
+#define S6_GPIO_IE		0x410
+#define S6_GPIO_RIS		0x414
+#define S6_GPIO_MIS		0x418
+#define S6_GPIO_IC		0x41C
+#define S6_GPIO_AFSEL		0x420
+#define S6_GPIO_DIR		0x800
+#define S6_GPIO_BANK(nr)	((nr) * 0x1000)
+#define S6_GPIO_MASK(nr)	(4 << (nr))
+#define S6_GPIO_OFFSET(nr) \
+		(S6_GPIO_BANK((nr) >> 3) + S6_GPIO_MASK((nr) & 7))
+
+static int direction_input(struct gpio_chip *chip, unsigned int off)
+{
+	writeb(0, S6_REG_GPIO + S6_GPIO_DIR + S6_GPIO_OFFSET(off));
+	return 0;
+}
+
+static int get(struct gpio_chip *chip, unsigned int off)
+{
+	return readb(S6_REG_GPIO + S6_GPIO_DATA + S6_GPIO_OFFSET(off));
+}
+
+static int direction_output(struct gpio_chip *chip, unsigned int off, int val)
+{
+	unsigned rel = S6_GPIO_OFFSET(off);
+	writeb(~0, S6_REG_GPIO + S6_GPIO_DIR + rel);
+	writeb(val ? ~0 : 0, S6_REG_GPIO + S6_GPIO_DATA + rel);
+	return 0;
+}
+
+static void set(struct gpio_chip *chip, unsigned int off, int val)
+{
+	writeb(val ? ~0 : 0, S6_REG_GPIO + S6_GPIO_DATA + S6_GPIO_OFFSET(off));
+}
+
+static int to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	if (offset < 8)
+		return offset + IRQ_BASE;
+	return -EINVAL;
+}
+
+static struct gpio_chip gpiochip = {
+	.owner = THIS_MODULE,
+	.direction_input = direction_input,
+	.get = get,
+	.direction_output = direction_output,
+	.set = set,
+	.to_irq = to_irq,
+	.base = 0,
+	.ngpio = 24,
+	.can_sleep = 0, /* no blocking io needed */
+	.exported = 0, /* no exporting to userspace */
+};
+
+int s6_gpio_init(u32 afsel)
+{
+	writeb(afsel, S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_AFSEL);
+	writeb(afsel >> 8, S6_REG_GPIO + S6_GPIO_BANK(1) + S6_GPIO_AFSEL);
+	writeb(afsel >> 16, S6_REG_GPIO + S6_GPIO_BANK(2) + S6_GPIO_AFSEL);
+	return gpiochip_add(&gpiochip);
+}
+
+static void ack(struct irq_data *d)
+{
+	writeb(1 << (d->irq - IRQ_BASE), S6_REG_GPIO + S6_GPIO_IC);
+}
+
+static void mask(struct irq_data *d)
+{
+	u8 r = readb(S6_REG_GPIO + S6_GPIO_IE);
+	r &= ~(1 << (d->irq - IRQ_BASE));
+	writeb(r, S6_REG_GPIO + S6_GPIO_IE);
+}
+
+static void unmask(struct irq_data *d)
+{
+	u8 m = readb(S6_REG_GPIO + S6_GPIO_IE);
+	m |= 1 << (d->irq - IRQ_BASE);
+	writeb(m, S6_REG_GPIO + S6_GPIO_IE);
+}
+
+static int set_type(struct irq_data *d, unsigned int type)
+{
+	const u8 m = 1 << (d->irq - IRQ_BASE);
+	irq_flow_handler_t handler;
+	u8 reg;
+
+	if (type == IRQ_TYPE_PROBE) {
+		if ((readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_AFSEL) & m)
+		    || (readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IE) & m)
+		    || readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_DIR
+			      + S6_GPIO_MASK(irq - IRQ_BASE)))
+			return 0;
+		type = IRQ_TYPE_EDGE_BOTH;
+	}
+
+	reg = readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IS);
+	if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) {
+		reg |= m;
+		handler = handle_level_irq;
+	} else {
+		reg &= ~m;
+		handler = handle_edge_irq;
+	}
+	writeb(reg, S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IS);
+	__irq_set_handler_locked(irq, handler);
+
+	reg = readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IEV);
+	if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING))
+		reg |= m;
+	else
+		reg &= ~m;
+	writeb(reg, S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IEV);
+
+	reg = readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IBE);
+	if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH)
+		reg |= m;
+	else
+		reg &= ~m;
+	writeb(reg, S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IBE);
+	return 0;
+}
+
+static struct irq_chip gpioirqs = {
+	.name = "GPIO",
+	.irq_ack = ack,
+	.irq_mask = mask,
+	.irq_unmask = unmask,
+	.irq_set_type = set_type,
+};
+
+static u8 demux_masks[4];
+
+static void demux_irqs(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	u8 *mask = irq_desc_get_handler_data(desc);
+	u8 pending;
+	int cirq;
+
+	chip->irq_mask(&desc->irq_data);
+	chip->irq_ack(&desc->irq_data));
+	pending = readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_MIS) & *mask;
+	cirq = IRQ_BASE - 1;
+	while (pending) {
+		int n = ffs(pending);
+		cirq += n;
+		pending >>= n;
+		generic_handle_irq(cirq);
+	}
+	chip->irq_unmask(&desc->irq_data));
+}
+
+extern const signed char *platform_irq_mappings[XTENSA_NR_IRQS];
+
+void __init variant_init_irq(void)
+{
+	int irq, n;
+	writeb(0, S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IE);
+	for (irq = n = 0; irq < XTENSA_NR_IRQS; irq++) {
+		const signed char *mapping = platform_irq_mappings[irq];
+		int alone = 1;
+		u8 mask;
+		if (!mapping)
+			continue;
+		for(mask = 0; *mapping != -1; mapping++)
+			switch (*mapping) {
+			case S6_INTC_GPIO(0):
+				mask |= 1 << 0;
+				break;
+			case S6_INTC_GPIO(1):
+				mask |= 1 << 1;
+				break;
+			case S6_INTC_GPIO(2):
+				mask |= 1 << 2;
+				break;
+			case S6_INTC_GPIO(3):
+				mask |= 0x1f << 3;
+				break;
+			default:
+				alone = 0;
+			}
+		if (mask) {
+			int cirq, i;
+			if (!alone) {
+				printk(KERN_ERR "chained irq chips can't share"
+					" parent irq %i\n", irq);
+				continue;
+			}
+			demux_masks[n] = mask;
+			cirq = IRQ_BASE - 1;
+			do {
+				i = ffs(mask);
+				cirq += i;
+				mask >>= i;
+				irq_set_chip(cirq, &gpioirqs);
+				irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
+			} while (mask);
+			irq_set_handler_data(irq, demux_masks + n);
+			irq_set_chained_handler(irq, demux_irqs);
+			if (++n == ARRAY_SIZE(demux_masks))
+				break;
+		}
+	}
+}
diff --git a/arch/xtensa/variants/s6000/include/variant/core.h b/arch/xtensa/variants/s6000/include/variant/core.h
new file mode 100644
index 00000000..af007953
--- /dev/null
+++ b/arch/xtensa/variants/s6000/include/variant/core.h
@@ -0,0 +1,431 @@
+/*
+ * Xtensa processor core configuration information.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1999-2008 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_CORE_CONFIGURATION_H
+#define _XTENSA_CORE_CONFIGURATION_H
+
+
+/****************************************************************************
+	    Parameters Useful for Any Code, USER or PRIVILEGED
+ ****************************************************************************/
+
+/*
+ *  Note:  Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is
+ *  configured, and a value of 0 otherwise.  These macros are always defined.
+ */
+
+
+/*----------------------------------------------------------------------
+				ISA
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_BE			0	/* big-endian byte ordering */
+#define XCHAL_HAVE_WINDOWED		1	/* windowed registers option */
+#define XCHAL_NUM_AREGS			64	/* num of physical addr regs */
+#define XCHAL_NUM_AREGS_LOG2		6	/* log2(XCHAL_NUM_AREGS) */
+#define XCHAL_MAX_INSTRUCTION_SIZE	8	/* max instr bytes (3..8) */
+#define XCHAL_HAVE_DEBUG		1	/* debug option */
+#define XCHAL_HAVE_DENSITY		1	/* 16-bit instructions */
+#define XCHAL_HAVE_LOOPS		1	/* zero-overhead loops */
+#define XCHAL_HAVE_NSA			1	/* NSA/NSAU instructions */
+#define XCHAL_HAVE_MINMAX		1	/* MIN/MAX instructions */
+#define XCHAL_HAVE_SEXT			1	/* SEXT instruction */
+#define XCHAL_HAVE_CLAMPS		1	/* CLAMPS instruction */
+#define XCHAL_HAVE_MUL16		1	/* MUL16S/MUL16U instructions */
+#define XCHAL_HAVE_MUL32		1	/* MULL instruction */
+#define XCHAL_HAVE_MUL32_HIGH		1	/* MULUH/MULSH instructions */
+#define XCHAL_HAVE_DIV32		0	/* QUOS/QUOU/REMS/REMU instructions */
+#define XCHAL_HAVE_L32R			1	/* L32R instruction */
+#define XCHAL_HAVE_ABSOLUTE_LITERALS	1	/* non-PC-rel (extended) L32R */
+#define XCHAL_HAVE_CONST16		0	/* CONST16 instruction */
+#define XCHAL_HAVE_ADDX			1	/* ADDX#/SUBX# instructions */
+#define XCHAL_HAVE_WIDE_BRANCHES	0	/* B*.W18 or B*.W15 instr's */
+#define XCHAL_HAVE_PREDICTED_BRANCHES	0	/* B[EQ/EQZ/NE/NEZ]T instr's */
+#define XCHAL_HAVE_CALL4AND12		1	/* (obsolete option) */
+#define XCHAL_HAVE_ABS			1	/* ABS instruction */
+/*#define XCHAL_HAVE_POPC		0*/	/* POPC instruction */
+/*#define XCHAL_HAVE_CRC		0*/	/* CRC instruction */
+#define XCHAL_HAVE_RELEASE_SYNC		0	/* L32AI/S32RI instructions */
+#define XCHAL_HAVE_S32C1I		0	/* S32C1I instruction */
+#define XCHAL_HAVE_SPECULATION		0	/* speculation */
+#define XCHAL_HAVE_FULL_RESET		0	/* all regs/state reset */
+#define XCHAL_NUM_CONTEXTS		1	/* */
+#define XCHAL_NUM_MISC_REGS		4	/* num of scratch regs (0..4) */
+#define XCHAL_HAVE_TAP_MASTER		0	/* JTAG TAP control instr's */
+#define XCHAL_HAVE_PRID			0	/* processor ID register */
+#define XCHAL_HAVE_THREADPTR		0	/* THREADPTR register */
+#define XCHAL_HAVE_BOOLEANS		1	/* boolean registers */
+#define XCHAL_HAVE_CP			1	/* CPENABLE reg (coprocessor) */
+#define XCHAL_CP_MAXCFG			8	/* max allowed cp id plus one */
+#define XCHAL_HAVE_MAC16		0	/* MAC16 package */
+#define XCHAL_HAVE_VECTORFPU2005	0	/* vector floating-point pkg */
+#define XCHAL_HAVE_FP			1	/* floating point pkg */
+#define XCHAL_HAVE_VECTRA1		0	/* Vectra I  pkg */
+#define XCHAL_HAVE_VECTRALX		0	/* Vectra LX pkg */
+#define XCHAL_HAVE_HIFI2		0	/* HiFi2 Audio Engine pkg */
+
+
+/*----------------------------------------------------------------------
+				MISC
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_WRITEBUFFER_ENTRIES	8	/* size of write buffer */
+#define XCHAL_INST_FETCH_WIDTH		8	/* instr-fetch width in bytes */
+#define XCHAL_DATA_WIDTH		16	/* data width in bytes */
+/*  In T1050, applies to selected core load and store instructions (see ISA): */
+#define XCHAL_UNALIGNED_LOAD_EXCEPTION	1	/* unaligned loads cause exc. */
+#define XCHAL_UNALIGNED_STORE_EXCEPTION	1	/* unaligned stores cause exc.*/
+
+#define XCHAL_SW_VERSION		701001	/* sw version of this header */
+
+#define XCHAL_CORE_ID			"stretch_bali"	/* alphanum core name
+						   (CoreID) set in the Xtensa
+						   Processor Generator */
+
+#define XCHAL_BUILD_UNIQUE_ID		0x000104B9	/* 22-bit sw build ID */
+
+/*
+ *  These definitions describe the hardware targeted by this software.
+ */
+#define XCHAL_HW_CONFIGID0		0xC2F3F9FE	/* ConfigID hi 32 bits*/
+#define XCHAL_HW_CONFIGID1		0x054104B9	/* ConfigID lo 32 bits*/
+#define XCHAL_HW_VERSION_NAME		"LX1.0.2"	/* full version name */
+#define XCHAL_HW_VERSION_MAJOR		2100	/* major ver# of targeted hw */
+#define XCHAL_HW_VERSION_MINOR		2	/* minor ver# of targeted hw */
+#define XCHAL_HW_VERSION		210002	/* major*100+minor */
+#define XCHAL_HW_REL_LX1		1
+#define XCHAL_HW_REL_LX1_0		1
+#define XCHAL_HW_REL_LX1_0_2		1
+#define XCHAL_HW_CONFIGID_RELIABLE	1
+/*  If software targets a *range* of hardware versions, these are the bounds: */
+#define XCHAL_HW_MIN_VERSION_MAJOR	2100	/* major v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION_MINOR	2	/* minor v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION		210002	/* earliest targeted hw */
+#define XCHAL_HW_MAX_VERSION_MAJOR	2100	/* major v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION_MINOR	2	/* minor v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION		210002	/* latest targeted hw */
+
+
+/*----------------------------------------------------------------------
+				CACHE
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_ICACHE_LINESIZE		16	/* I-cache line size in bytes */
+#define XCHAL_DCACHE_LINESIZE		16	/* D-cache line size in bytes */
+#define XCHAL_ICACHE_LINEWIDTH		4	/* log2(I line size in bytes) */
+#define XCHAL_DCACHE_LINEWIDTH		4	/* log2(D line size in bytes) */
+
+#define XCHAL_ICACHE_SIZE		32768	/* I-cache size in bytes or 0 */
+#define XCHAL_DCACHE_SIZE		32768	/* D-cache size in bytes or 0 */
+
+#define XCHAL_DCACHE_IS_WRITEBACK	1	/* writeback feature */
+
+
+
+
+/****************************************************************************
+    Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code
+ ****************************************************************************/
+
+
+#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY
+
+/*----------------------------------------------------------------------
+				CACHE
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_PIF			1	/* any outbound PIF present */
+
+/*  If present, cache size in bytes == (ways * 2^(linewidth + setwidth)).  */
+
+/*  Number of cache sets in log2(lines per way):  */
+#define XCHAL_ICACHE_SETWIDTH		9
+#define XCHAL_DCACHE_SETWIDTH		10
+
+/*  Cache set associativity (number of ways):  */
+#define XCHAL_ICACHE_WAYS		4
+#define XCHAL_DCACHE_WAYS		2
+
+/*  Cache features:  */
+#define XCHAL_ICACHE_LINE_LOCKABLE	1
+#define XCHAL_DCACHE_LINE_LOCKABLE	0
+#define XCHAL_ICACHE_ECC_PARITY		0
+#define XCHAL_DCACHE_ECC_PARITY		0
+
+/*  Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits):  */
+#define XCHAL_CA_BITS			4
+
+
+/*----------------------------------------------------------------------
+			INTERNAL I/D RAM/ROMs and XLMI
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_INSTROM		0	/* number of core instr. ROMs */
+#define XCHAL_NUM_INSTRAM		0	/* number of core instr. RAMs */
+#define XCHAL_NUM_DATAROM		0	/* number of core data ROMs */
+#define XCHAL_NUM_DATARAM		1	/* number of core data RAMs */
+#define XCHAL_NUM_URAM			0	/* number of core unified RAMs*/
+#define XCHAL_NUM_XLMI			1	/* number of core XLMI ports */
+
+/*  Data RAM 0:  */
+#define XCHAL_DATARAM0_VADDR		0x3FFF0000
+#define XCHAL_DATARAM0_PADDR		0x3FFF0000
+#define XCHAL_DATARAM0_SIZE		65536
+#define XCHAL_DATARAM0_ECC_PARITY	0
+
+/*  XLMI Port 0:  */
+#define XCHAL_XLMI0_VADDR		0x37F80000
+#define XCHAL_XLMI0_PADDR		0x37F80000
+#define XCHAL_XLMI0_SIZE		262144
+#define XCHAL_XLMI0_ECC_PARITY	0
+
+
+/*----------------------------------------------------------------------
+			INTERRUPTS and TIMERS
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_INTERRUPTS		1	/* interrupt option */
+#define XCHAL_HAVE_HIGHPRI_INTERRUPTS	1	/* med/high-pri. interrupts */
+#define XCHAL_HAVE_NMI			1	/* non-maskable interrupt */
+#define XCHAL_HAVE_CCOUNT		1	/* CCOUNT reg. (timer option) */
+#define XCHAL_NUM_TIMERS		3	/* number of CCOMPAREn regs */
+#define XCHAL_NUM_INTERRUPTS		27	/* number of interrupts */
+#define XCHAL_NUM_INTERRUPTS_LOG2	5	/* ceil(log2(NUM_INTERRUPTS)) */
+#define XCHAL_NUM_EXTINTERRUPTS		20	/* num of external interrupts */
+#define XCHAL_NUM_INTLEVELS		4	/* number of interrupt levels
+						   (not including level zero) */
+#define XCHAL_EXCM_LEVEL		1	/* level masked by PS.EXCM */
+	/* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */
+
+/*  Masks of interrupts at each interrupt level:  */
+#define XCHAL_INTLEVEL1_MASK		0x01F07FFF
+#define XCHAL_INTLEVEL2_MASK		0x02018000
+#define XCHAL_INTLEVEL3_MASK		0x04060000
+#define XCHAL_INTLEVEL4_MASK		0x00000000
+#define XCHAL_INTLEVEL5_MASK		0x00080000
+#define XCHAL_INTLEVEL6_MASK		0x00000000
+#define XCHAL_INTLEVEL7_MASK		0x00000000
+
+/*  Masks of interrupts at each range 1..n of interrupt levels:  */
+#define XCHAL_INTLEVEL1_ANDBELOW_MASK	0x01F07FFF
+#define XCHAL_INTLEVEL2_ANDBELOW_MASK	0x03F1FFFF
+#define XCHAL_INTLEVEL3_ANDBELOW_MASK	0x07F7FFFF
+#define XCHAL_INTLEVEL4_ANDBELOW_MASK	0x07F7FFFF
+#define XCHAL_INTLEVEL5_ANDBELOW_MASK	0x07FFFFFF
+#define XCHAL_INTLEVEL6_ANDBELOW_MASK	0x07FFFFFF
+#define XCHAL_INTLEVEL7_ANDBELOW_MASK	0x07FFFFFF
+
+/*  Level of each interrupt:  */
+#define XCHAL_INT0_LEVEL		1
+#define XCHAL_INT1_LEVEL		1
+#define XCHAL_INT2_LEVEL		1
+#define XCHAL_INT3_LEVEL		1
+#define XCHAL_INT4_LEVEL		1
+#define XCHAL_INT5_LEVEL		1
+#define XCHAL_INT6_LEVEL		1
+#define XCHAL_INT7_LEVEL		1
+#define XCHAL_INT8_LEVEL		1
+#define XCHAL_INT9_LEVEL		1
+#define XCHAL_INT10_LEVEL		1
+#define XCHAL_INT11_LEVEL		1
+#define XCHAL_INT12_LEVEL		1
+#define XCHAL_INT13_LEVEL		1
+#define XCHAL_INT14_LEVEL		1
+#define XCHAL_INT15_LEVEL		2
+#define XCHAL_INT16_LEVEL		2
+#define XCHAL_INT17_LEVEL		3
+#define XCHAL_INT18_LEVEL		3
+#define XCHAL_INT19_LEVEL		5
+#define XCHAL_INT20_LEVEL		1
+#define XCHAL_INT21_LEVEL		1
+#define XCHAL_INT22_LEVEL		1
+#define XCHAL_INT23_LEVEL		1
+#define XCHAL_INT24_LEVEL		1
+#define XCHAL_INT25_LEVEL		2
+#define XCHAL_INT26_LEVEL		3
+#define XCHAL_DEBUGLEVEL		4	/* debug interrupt level */
+#define XCHAL_HAVE_DEBUG_EXTERN_INT	1	/* OCD external db interrupt */
+#define XCHAL_NMILEVEL			5	/* NMI "level" (for use with
+						   EXCSAVE/EPS/EPC_n, RFI n) */
+
+/*  Type of each interrupt:  */
+#define XCHAL_INT0_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT1_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT2_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT3_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT4_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT5_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT6_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT7_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT8_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT9_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT10_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT11_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT12_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT13_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT14_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT15_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT16_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT17_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT18_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT19_TYPE 	XTHAL_INTTYPE_NMI
+#define XCHAL_INT20_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT21_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT22_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT23_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT24_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT25_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT26_TYPE 	XTHAL_INTTYPE_TIMER
+
+/*  Masks of interrupts for each type of interrupt:  */
+#define XCHAL_INTTYPE_MASK_UNCONFIGURED	0xF8000000
+#define XCHAL_INTTYPE_MASK_SOFTWARE	0x00F00000
+#define XCHAL_INTTYPE_MASK_EXTERN_EDGE	0x00000000
+#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL	0x0007FFFF
+#define XCHAL_INTTYPE_MASK_TIMER	0x07000000
+#define XCHAL_INTTYPE_MASK_NMI		0x00080000
+#define XCHAL_INTTYPE_MASK_WRITE_ERROR	0x00000000
+
+/*  Interrupt numbers assigned to specific interrupt sources:  */
+#define XCHAL_TIMER0_INTERRUPT		24	/* CCOMPARE0 */
+#define XCHAL_TIMER1_INTERRUPT		25	/* CCOMPARE1 */
+#define XCHAL_TIMER2_INTERRUPT		26	/* CCOMPARE2 */
+#define XCHAL_TIMER3_INTERRUPT		XTHAL_TIMER_UNCONFIGURED
+#define XCHAL_NMI_INTERRUPT		19	/* non-maskable interrupt */
+
+/*  Interrupt numbers for levels at which only one interrupt is configured:  */
+#define XCHAL_INTLEVEL5_NUM		19
+/*  (There are many interrupts each at level(s) 1, 2, 3.)  */
+
+
+/*
+ *  External interrupt vectors/levels.
+ *  These macros describe how Xtensa processor interrupt numbers
+ *  (as numbered internally, eg. in INTERRUPT and INTENABLE registers)
+ *  map to external BInterrupt<n> pins, for those interrupts
+ *  configured as external (level-triggered, edge-triggered, or NMI).
+ *  See the Xtensa processor databook for more details.
+ */
+
+/*  Core interrupt numbers mapped to each EXTERNAL interrupt number:  */
+#define XCHAL_EXTINT0_NUM		0	/* (intlevel 1) */
+#define XCHAL_EXTINT1_NUM		1	/* (intlevel 1) */
+#define XCHAL_EXTINT2_NUM		2	/* (intlevel 1) */
+#define XCHAL_EXTINT3_NUM		3	/* (intlevel 1) */
+#define XCHAL_EXTINT4_NUM		4	/* (intlevel 1) */
+#define XCHAL_EXTINT5_NUM		5	/* (intlevel 1) */
+#define XCHAL_EXTINT6_NUM		6	/* (intlevel 1) */
+#define XCHAL_EXTINT7_NUM		7	/* (intlevel 1) */
+#define XCHAL_EXTINT8_NUM		8	/* (intlevel 1) */
+#define XCHAL_EXTINT9_NUM		9	/* (intlevel 1) */
+#define XCHAL_EXTINT10_NUM		10	/* (intlevel 1) */
+#define XCHAL_EXTINT11_NUM		11	/* (intlevel 1) */
+#define XCHAL_EXTINT12_NUM		12	/* (intlevel 1) */
+#define XCHAL_EXTINT13_NUM		13	/* (intlevel 1) */
+#define XCHAL_EXTINT14_NUM		14	/* (intlevel 1) */
+#define XCHAL_EXTINT15_NUM		15	/* (intlevel 2) */
+#define XCHAL_EXTINT16_NUM		16	/* (intlevel 2) */
+#define XCHAL_EXTINT17_NUM		17	/* (intlevel 3) */
+#define XCHAL_EXTINT18_NUM		18	/* (intlevel 3) */
+#define XCHAL_EXTINT19_NUM		19	/* (intlevel 5) */
+
+
+/*----------------------------------------------------------------------
+			EXCEPTIONS and VECTORS
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_XEA_VERSION		2	/* Xtensa Exception Architecture
+						   number: 1 == XEA1 (old)
+							   2 == XEA2 (new)
+							   0 == XEAX (extern) */
+#define XCHAL_HAVE_XEA1			0	/* Exception Architecture 1 */
+#define XCHAL_HAVE_XEA2			1	/* Exception Architecture 2 */
+#define XCHAL_HAVE_XEAX			0	/* External Exception Arch. */
+#define XCHAL_HAVE_EXCEPTIONS		1	/* exception option */
+#define XCHAL_HAVE_MEM_ECC_PARITY	0	/* local memory ECC/parity */
+#define XCHAL_HAVE_VECTOR_SELECT	0	/* relocatable vectors */
+#define XCHAL_HAVE_VECBASE		0	/* relocatable vectors */
+
+#define XCHAL_RESET_VECOFS		0x00000000
+#define XCHAL_RESET_VECTOR_VADDR	0x3FFE03D0
+#define XCHAL_RESET_VECTOR_PADDR	0x3FFE03D0
+#define XCHAL_USER_VECOFS		0x00000000
+#define XCHAL_USER_VECTOR_VADDR		0x40000220
+#define XCHAL_USER_VECTOR_PADDR		0x40000220
+#define XCHAL_KERNEL_VECOFS		0x00000000
+#define XCHAL_KERNEL_VECTOR_VADDR	0x40000200
+#define XCHAL_KERNEL_VECTOR_PADDR	0x40000200
+#define XCHAL_DOUBLEEXC_VECOFS		0x00000000
+#define XCHAL_DOUBLEEXC_VECTOR_VADDR	0x400002A0
+#define XCHAL_DOUBLEEXC_VECTOR_PADDR	0x400002A0
+#define XCHAL_WINDOW_OF4_VECOFS		0x00000000
+#define XCHAL_WINDOW_UF4_VECOFS		0x00000040
+#define XCHAL_WINDOW_OF8_VECOFS		0x00000080
+#define XCHAL_WINDOW_UF8_VECOFS		0x000000C0
+#define XCHAL_WINDOW_OF12_VECOFS	0x00000100
+#define XCHAL_WINDOW_UF12_VECOFS	0x00000140
+#define XCHAL_WINDOW_VECTORS_VADDR	0x40000000
+#define XCHAL_WINDOW_VECTORS_PADDR	0x40000000
+#define XCHAL_INTLEVEL2_VECOFS		0x00000000
+#define XCHAL_INTLEVEL2_VECTOR_VADDR	0x40000240
+#define XCHAL_INTLEVEL2_VECTOR_PADDR	0x40000240
+#define XCHAL_INTLEVEL3_VECOFS		0x00000000
+#define XCHAL_INTLEVEL3_VECTOR_VADDR	0x40000260
+#define XCHAL_INTLEVEL3_VECTOR_PADDR	0x40000260
+#define XCHAL_INTLEVEL4_VECOFS		0x00000000
+#define XCHAL_INTLEVEL4_VECTOR_VADDR	0x40000390
+#define XCHAL_INTLEVEL4_VECTOR_PADDR	0x40000390
+#define XCHAL_DEBUG_VECOFS		XCHAL_INTLEVEL4_VECOFS
+#define XCHAL_DEBUG_VECTOR_VADDR	XCHAL_INTLEVEL4_VECTOR_VADDR
+#define XCHAL_DEBUG_VECTOR_PADDR	XCHAL_INTLEVEL4_VECTOR_PADDR
+#define XCHAL_NMI_VECOFS		0x00000000
+#define XCHAL_NMI_VECTOR_VADDR		0x400003B0
+#define XCHAL_NMI_VECTOR_PADDR		0x400003B0
+#define XCHAL_INTLEVEL5_VECOFS		XCHAL_NMI_VECOFS
+#define XCHAL_INTLEVEL5_VECTOR_VADDR	XCHAL_NMI_VECTOR_VADDR
+#define XCHAL_INTLEVEL5_VECTOR_PADDR	XCHAL_NMI_VECTOR_PADDR
+
+
+/*----------------------------------------------------------------------
+				DEBUG
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_OCD			1	/* OnChipDebug option */
+#define XCHAL_NUM_IBREAK		2	/* number of IBREAKn regs */
+#define XCHAL_NUM_DBREAK		2	/* number of DBREAKn regs */
+#define XCHAL_HAVE_OCD_DIR_ARRAY	1	/* faster OCD option */
+
+
+/*----------------------------------------------------------------------
+				MMU
+  ----------------------------------------------------------------------*/
+
+/*  See core-matmap.h header file for more details.  */
+
+#define XCHAL_HAVE_TLBS			1	/* inverse of HAVE_CACHEATTR */
+#define XCHAL_HAVE_SPANNING_WAY		1	/* one way maps I+D 4GB vaddr */
+#define XCHAL_HAVE_IDENTITY_MAP		1	/* vaddr == paddr always */
+#define XCHAL_HAVE_CACHEATTR		0	/* CACHEATTR register present */
+#define XCHAL_HAVE_MIMIC_CACHEATTR	1	/* region protection */
+#define XCHAL_HAVE_XLT_CACHEATTR	0	/* region prot. w/translation */
+#define XCHAL_HAVE_PTP_MMU		0	/* full MMU (with page table
+						   [autorefill] and protection)
+						   usable for an MMU-based OS */
+/*  If none of the above last 4 are set, it's a custom TLB configuration.  */
+
+#define XCHAL_MMU_ASID_BITS		0	/* number of bits in ASIDs */
+#define XCHAL_MMU_RINGS			1	/* number of rings (1..4) */
+#define XCHAL_MMU_RING_BITS		0	/* num of bits in RING field */
+
+#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */
+
+
+#endif /* _XTENSA_CORE_CONFIGURATION_H */
+
diff --git a/arch/xtensa/variants/s6000/include/variant/dmac.h b/arch/xtensa/variants/s6000/include/variant/dmac.h
new file mode 100644
index 00000000..89ab9484
--- /dev/null
+++ b/arch/xtensa/variants/s6000/include/variant/dmac.h
@@ -0,0 +1,387 @@
+/*
+ * include/asm-xtensa/variant-s6000/dmac.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 Tensilica Inc.
+ * Copyright (C) 2008 Emlix GmbH <info@emlix.com>
+ * Authors:	Fabian Godehardt <fg@emlix.com>
+ *		Oskar Schirmer <os@emlix.com>
+ *		Daniel Gloeckner <dg@emlix.com>
+ */
+
+#ifndef __ASM_XTENSA_S6000_DMAC_H
+#define __ASM_XTENSA_S6000_DMAC_H
+#include <linux/io.h>
+#include <variant/hardware.h>
+
+/* DMA global */
+
+#define S6_DMA_INTSTAT0		0x000
+#define S6_DMA_INTSTAT1		0x004
+#define S6_DMA_INTENABLE0	0x008
+#define S6_DMA_INTENABLE1	0x00C
+#define S6_DMA_INTRAW0		0x010
+#define S6_DMA_INTRAW1		0x014
+#define S6_DMA_INTCLEAR0	0x018
+#define S6_DMA_INTCLEAR1	0x01C
+#define S6_DMA_INTSET0		0x020
+#define S6_DMA_INTSET1		0x024
+#define S6_DMA_INT0_UNDER		0
+#define S6_DMA_INT0_OVER		16
+#define S6_DMA_INT1_CHANNEL		0
+#define S6_DMA_INT1_MASTER		16
+#define S6_DMA_INT1_MASTER_MASK			7
+#define S6_DMA_TERMCNTIRQSTAT	0x028
+#define S6_DMA_TERMCNTIRQCLR	0x02C
+#define S6_DMA_TERMCNTIRQSET	0x030
+#define S6_DMA_PENDCNTIRQSTAT	0x034
+#define S6_DMA_PENDCNTIRQCLR	0x038
+#define S6_DMA_PENDCNTIRQSET	0x03C
+#define S6_DMA_LOWWMRKIRQSTAT	0x040
+#define S6_DMA_LOWWMRKIRQCLR	0x044
+#define S6_DMA_LOWWMRKIRQSET	0x048
+#define S6_DMA_MASTERERRINFO	0x04C
+#define S6_DMA_MASTERERR_CHAN(n)	(4*(n))
+#define S6_DMA_MASTERERR_CHAN_MASK		0xF
+#define S6_DMA_DESCRFIFO0	0x050
+#define S6_DMA_DESCRFIFO1	0x054
+#define S6_DMA_DESCRFIFO2	0x058
+#define S6_DMA_DESCRFIFO2_AUTODISABLE	24
+#define S6_DMA_DESCRFIFO3	0x05C
+#define S6_DMA_MASTER0START	0x060
+#define S6_DMA_MASTER0END	0x064
+#define S6_DMA_MASTER1START	0x068
+#define S6_DMA_MASTER1END	0x06C
+#define S6_DMA_NEXTFREE		0x070
+#define S6_DMA_NEXTFREE_CHAN		0
+#define S6_DMA_NEXTFREE_CHAN_MASK	0x1F
+#define S6_DMA_NEXTFREE_ENA		16
+#define S6_DMA_NEXTFREE_ENA_MASK	((1 << 16) - 1)
+#define S6_DMA_DPORTCTRLGRP(p)	((p) * 4 + 0x074)
+#define S6_DMA_DPORTCTRLGRP_FRAMEREP	0
+#define S6_DMA_DPORTCTRLGRP_NRCHANS	1
+#define S6_DMA_DPORTCTRLGRP_NRCHANS_1		0
+#define S6_DMA_DPORTCTRLGRP_NRCHANS_3		1
+#define S6_DMA_DPORTCTRLGRP_NRCHANS_4		2
+#define S6_DMA_DPORTCTRLGRP_NRCHANS_2		3
+#define S6_DMA_DPORTCTRLGRP_ENA		31
+
+
+/* DMA per channel */
+
+#define DMA_CHNL(dmac, n)	((dmac) + 0x1000 + (n) * 0x100)
+#define DMA_INDEX_CHNL(addr)	(((addr) >> 8) & 0xF)
+#define DMA_MASK_DMAC(addr)	((addr) & 0xFFFF0000)
+#define S6_DMA_CHNCTRL		0x000
+#define S6_DMA_CHNCTRL_ENABLE		0
+#define S6_DMA_CHNCTRL_PAUSE		1
+#define S6_DMA_CHNCTRL_PRIO		2
+#define S6_DMA_CHNCTRL_PRIO_MASK		3
+#define S6_DMA_CHNCTRL_PERIPHXFER	4
+#define S6_DMA_CHNCTRL_PERIPHENA	5
+#define S6_DMA_CHNCTRL_SRCINC		6
+#define S6_DMA_CHNCTRL_DSTINC		7
+#define S6_DMA_CHNCTRL_BURSTLOG		8
+#define S6_DMA_CHNCTRL_BURSTLOG_MASK		7
+#define S6_DMA_CHNCTRL_DESCFIFODEPTH	12
+#define S6_DMA_CHNCTRL_DESCFIFODEPTH_MASK	0x1F
+#define S6_DMA_CHNCTRL_DESCFIFOFULL	17
+#define S6_DMA_CHNCTRL_BWCONSEL		18
+#define S6_DMA_CHNCTRL_BWCONENA		19
+#define S6_DMA_CHNCTRL_PENDGCNTSTAT	20
+#define S6_DMA_CHNCTRL_PENDGCNTSTAT_MASK	0x3F
+#define S6_DMA_CHNCTRL_LOWWMARK		26
+#define S6_DMA_CHNCTRL_LOWWMARK_MASK		0xF
+#define S6_DMA_CHNCTRL_TSTAMP		30
+#define S6_DMA_TERMCNTNB	0x004
+#define S6_DMA_TERMCNTNB_MASK			0xFFFF
+#define S6_DMA_TERMCNTTMO	0x008
+#define S6_DMA_TERMCNTSTAT	0x00C
+#define S6_DMA_TERMCNTSTAT_MASK		0xFF
+#define S6_DMA_CMONCHUNK	0x010
+#define S6_DMA_SRCSKIP		0x014
+#define S6_DMA_DSTSKIP		0x018
+#define S6_DMA_CUR_SRC		0x024
+#define S6_DMA_CUR_DST		0x028
+#define S6_DMA_TIMESTAMP	0x030
+
+/* DMA channel lists */
+
+#define S6_DPDMA_CHAN(stream, channel)	(4 * (stream) + (channel))
+#define S6_DPDMA_NB	16
+
+#define S6_HIFDMA_GMACTX	0
+#define S6_HIFDMA_GMACRX	1
+#define S6_HIFDMA_I2S0		2
+#define S6_HIFDMA_I2S1		3
+#define S6_HIFDMA_EGIB		4
+#define S6_HIFDMA_PCITX		5
+#define S6_HIFDMA_PCIRX		6
+#define S6_HIFDMA_NB	7
+
+#define S6_NIDMA_NB	4
+
+#define S6_LMSDMA_NB	12
+
+/* controller access */
+
+#define S6_DMAC_NB	4
+#define S6_DMAC_INDEX(dmac)	(((unsigned)(dmac) >> 18) % S6_DMAC_NB)
+
+struct s6dmac_ctrl {
+	u32 dmac;
+	spinlock_t lock;
+	u8 chan_nb;
+};
+
+extern struct s6dmac_ctrl s6dmac_ctrl[S6_DMAC_NB];
+
+
+/* DMA control, per channel */
+
+static inline int s6dmac_fifo_full(u32 dmac, int chan)
+{
+	return (readl(DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL)
+		& (1 << S6_DMA_CHNCTRL_DESCFIFOFULL)) && 1;
+}
+
+static inline int s6dmac_termcnt_irq(u32 dmac, int chan)
+{
+	u32 m = 1 << chan;
+	int r = (readl(dmac + S6_DMA_TERMCNTIRQSTAT) & m) && 1;
+	if (r)
+		writel(m, dmac + S6_DMA_TERMCNTIRQCLR);
+	return r;
+}
+
+static inline int s6dmac_pendcnt_irq(u32 dmac, int chan)
+{
+	u32 m = 1 << chan;
+	int r = (readl(dmac + S6_DMA_PENDCNTIRQSTAT) & m) && 1;
+	if (r)
+		writel(m, dmac + S6_DMA_PENDCNTIRQCLR);
+	return r;
+}
+
+static inline int s6dmac_lowwmark_irq(u32 dmac, int chan)
+{
+	int r = (readl(dmac + S6_DMA_LOWWMRKIRQSTAT) & (1 << chan)) ? 1 : 0;
+	if (r)
+		writel(1 << chan, dmac + S6_DMA_LOWWMRKIRQCLR);
+	return r;
+}
+
+static inline u32 s6dmac_pending_count(u32 dmac, int chan)
+{
+	return (readl(DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL)
+			>> S6_DMA_CHNCTRL_PENDGCNTSTAT)
+		& S6_DMA_CHNCTRL_PENDGCNTSTAT_MASK;
+}
+
+static inline void s6dmac_set_terminal_count(u32 dmac, int chan, u32 n)
+{
+	n &= S6_DMA_TERMCNTNB_MASK;
+	n |= readl(DMA_CHNL(dmac, chan) + S6_DMA_TERMCNTNB)
+	      & ~S6_DMA_TERMCNTNB_MASK;
+	writel(n, DMA_CHNL(dmac, chan) + S6_DMA_TERMCNTNB);
+}
+
+static inline u32 s6dmac_get_terminal_count(u32 dmac, int chan)
+{
+	return (readl(DMA_CHNL(dmac, chan) + S6_DMA_TERMCNTNB))
+		& S6_DMA_TERMCNTNB_MASK;
+}
+
+static inline u32 s6dmac_timestamp(u32 dmac, int chan)
+{
+	return readl(DMA_CHNL(dmac, chan) + S6_DMA_TIMESTAMP);
+}
+
+static inline u32 s6dmac_cur_src(u32 dmac, int chan)
+{
+	return readl(DMA_CHNL(dmac, chan) + S6_DMA_CUR_SRC);
+}
+
+static inline u32 s6dmac_cur_dst(u32 dmac, int chan)
+{
+	return readl(DMA_CHNL(dmac, chan) + S6_DMA_CUR_DST);
+}
+
+static inline void s6dmac_disable_chan(u32 dmac, int chan)
+{
+	u32 ctrl;
+	writel(readl(DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL)
+		& ~(1 << S6_DMA_CHNCTRL_ENABLE),
+		DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL);
+	do
+		ctrl = readl(DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL);
+	while (ctrl & (1 << S6_DMA_CHNCTRL_ENABLE));
+}
+
+static inline void s6dmac_set_stride_skip(u32 dmac, int chan,
+	int comchunk,		/* 0: disable scatter/gather */
+	int srcskip, int dstskip)
+{
+	writel(comchunk, DMA_CHNL(dmac, chan) + S6_DMA_CMONCHUNK);
+	writel(srcskip, DMA_CHNL(dmac, chan) + S6_DMA_SRCSKIP);
+	writel(dstskip, DMA_CHNL(dmac, chan) + S6_DMA_DSTSKIP);
+}
+
+static inline void s6dmac_enable_chan(u32 dmac, int chan,
+	int prio,               /* 0 (highest) .. 3 (lowest) */
+	int periphxfer,         /* <0: disable p.req.line, 0..1: mode */
+	int srcinc, int dstinc, /* 0: dont increment src/dst address */
+	int comchunk,		/* 0: disable scatter/gather */
+	int srcskip, int dstskip,
+	int burstsize,		/* 4 for I2S, 7 for everything else */
+	int bandwidthconserve,  /* <0: disable, 0..1: select */
+	int lowwmark,           /* 0..15 */
+	int timestamp,		/* 0: disable timestamp */
+	int enable)		/* 0: disable for now */
+{
+	writel(1, DMA_CHNL(dmac, chan) + S6_DMA_TERMCNTNB);
+	writel(0, DMA_CHNL(dmac, chan) + S6_DMA_TERMCNTTMO);
+	writel(lowwmark << S6_DMA_CHNCTRL_LOWWMARK,
+		DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL);
+	s6dmac_set_stride_skip(dmac, chan, comchunk, srcskip, dstskip);
+	writel(((enable ? 1 : 0) << S6_DMA_CHNCTRL_ENABLE) |
+		(prio << S6_DMA_CHNCTRL_PRIO) |
+		(((periphxfer > 0) ? 1 : 0) << S6_DMA_CHNCTRL_PERIPHXFER) |
+		(((periphxfer < 0) ? 0 : 1) << S6_DMA_CHNCTRL_PERIPHENA) |
+		((srcinc ? 1 : 0) << S6_DMA_CHNCTRL_SRCINC) |
+		((dstinc ? 1 : 0) << S6_DMA_CHNCTRL_DSTINC) |
+		(burstsize << S6_DMA_CHNCTRL_BURSTLOG) |
+		(((bandwidthconserve > 0) ? 1 : 0) << S6_DMA_CHNCTRL_BWCONSEL) |
+		(((bandwidthconserve < 0) ? 0 : 1) << S6_DMA_CHNCTRL_BWCONENA) |
+		(lowwmark << S6_DMA_CHNCTRL_LOWWMARK) |
+		((timestamp ? 1 : 0) << S6_DMA_CHNCTRL_TSTAMP),
+		DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL);
+}
+
+
+/* DMA control, per engine */
+
+static inline unsigned _dmac_addr_index(u32 dmac)
+{
+	unsigned i = S6_DMAC_INDEX(dmac);
+	if (s6dmac_ctrl[i].dmac != dmac)
+		BUG();
+	return i;
+}
+
+static inline void _s6dmac_disable_error_irqs(u32 dmac, u32 mask)
+{
+	writel(mask, dmac + S6_DMA_TERMCNTIRQCLR);
+	writel(mask, dmac + S6_DMA_PENDCNTIRQCLR);
+	writel(mask, dmac + S6_DMA_LOWWMRKIRQCLR);
+	writel(readl(dmac + S6_DMA_INTENABLE0)
+		& ~((mask << S6_DMA_INT0_UNDER) | (mask << S6_DMA_INT0_OVER)),
+		dmac + S6_DMA_INTENABLE0);
+	writel(readl(dmac + S6_DMA_INTENABLE1) & ~(mask << S6_DMA_INT1_CHANNEL),
+		dmac + S6_DMA_INTENABLE1);
+	writel((mask << S6_DMA_INT0_UNDER) | (mask << S6_DMA_INT0_OVER),
+		dmac + S6_DMA_INTCLEAR0);
+	writel(mask << S6_DMA_INT1_CHANNEL, dmac + S6_DMA_INTCLEAR1);
+}
+
+/*
+ * request channel from specified engine
+ * with chan<0, accept any channel
+ * further parameters see s6dmac_enable_chan
+ * returns < 0 upon error, channel nb otherwise
+ */
+static inline int s6dmac_request_chan(u32 dmac, int chan,
+	int prio,
+	int periphxfer,
+	int srcinc, int dstinc,
+	int comchunk,
+	int srcskip, int dstskip,
+	int burstsize,
+	int bandwidthconserve,
+	int lowwmark,
+	int timestamp,
+	int enable)
+{
+	int r = chan;
+	unsigned long flags;
+	spinlock_t *spinl = &s6dmac_ctrl[_dmac_addr_index(dmac)].lock;
+	spin_lock_irqsave(spinl, flags);
+	if (r < 0) {
+		r = (readl(dmac + S6_DMA_NEXTFREE) >> S6_DMA_NEXTFREE_CHAN)
+			& S6_DMA_NEXTFREE_CHAN_MASK;
+	}
+	if (r >= s6dmac_ctrl[_dmac_addr_index(dmac)].chan_nb) {
+		if (chan < 0)
+			r = -EBUSY;
+		else
+			r = -ENXIO;
+	} else if (((readl(dmac + S6_DMA_NEXTFREE) >> S6_DMA_NEXTFREE_ENA)
+			>> r) & 1) {
+		r = -EBUSY;
+	} else {
+		s6dmac_enable_chan(dmac, r, prio, periphxfer,
+			srcinc, dstinc, comchunk, srcskip, dstskip, burstsize,
+			bandwidthconserve, lowwmark, timestamp, enable);
+	}
+	spin_unlock_irqrestore(spinl, flags);
+	return r;
+}
+
+static inline void s6dmac_put_fifo(u32 dmac, int chan,
+	u32 src, u32 dst, u32 size)
+{
+	unsigned long flags;
+	spinlock_t *spinl = &s6dmac_ctrl[_dmac_addr_index(dmac)].lock;
+	spin_lock_irqsave(spinl, flags);
+	writel(src, dmac + S6_DMA_DESCRFIFO0);
+	writel(dst, dmac + S6_DMA_DESCRFIFO1);
+	writel(size, dmac + S6_DMA_DESCRFIFO2);
+	writel(chan, dmac + S6_DMA_DESCRFIFO3);
+	spin_unlock_irqrestore(spinl, flags);
+}
+
+static inline u32 s6dmac_channel_enabled(u32 dmac, int chan)
+{
+	return readl(DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL) &
+			(1 << S6_DMA_CHNCTRL_ENABLE);
+}
+
+/*
+ * group 1-4 data port channels
+ * with port=0..3, nrch=1-4 channels,
+ * frrep=0/1 (dis- or enable frame repeat)
+ */
+static inline void s6dmac_dp_setup_group(u32 dmac, int port,
+			int nrch, int frrep)
+{
+	const static u8 mask[4] = {0, 3, 1, 2};
+	BUG_ON(dmac != S6_REG_DPDMA);
+	if ((port < 0) || (port > 3) || (nrch < 1) || (nrch > 4))
+		return;
+	writel((mask[nrch - 1] << S6_DMA_DPORTCTRLGRP_NRCHANS)
+		| ((frrep ? 1 : 0) << S6_DMA_DPORTCTRLGRP_FRAMEREP),
+		dmac + S6_DMA_DPORTCTRLGRP(port));
+}
+
+static inline void s6dmac_dp_switch_group(u32 dmac, int port, int enable)
+{
+	u32 tmp;
+	BUG_ON(dmac != S6_REG_DPDMA);
+	tmp = readl(dmac + S6_DMA_DPORTCTRLGRP(port));
+	if (enable)
+		tmp |= (1 << S6_DMA_DPORTCTRLGRP_ENA);
+	else
+		tmp &= ~(1 << S6_DMA_DPORTCTRLGRP_ENA);
+	writel(tmp, dmac + S6_DMA_DPORTCTRLGRP(port));
+}
+
+extern void s6dmac_put_fifo_cache(u32 dmac, int chan,
+	u32 src, u32 dst, u32 size);
+extern void s6dmac_disable_error_irqs(u32 dmac, u32 mask);
+extern u32 s6dmac_int_sources(u32 dmac, u32 channel);
+extern void s6dmac_release_chan(u32 dmac, int chan);
+
+#endif /* __ASM_XTENSA_S6000_DMAC_H */
diff --git a/arch/xtensa/variants/s6000/include/variant/gpio.h b/arch/xtensa/variants/s6000/include/variant/gpio.h
new file mode 100644
index 00000000..8484ab0d
--- /dev/null
+++ b/arch/xtensa/variants/s6000/include/variant/gpio.h
@@ -0,0 +1,6 @@
+#ifndef _XTENSA_VARIANT_S6000_GPIO_H
+#define _XTENSA_VARIANT_S6000_GPIO_H
+
+extern int s6_gpio_init(u32 afsel);
+
+#endif /* _XTENSA_VARIANT_S6000_GPIO_H */
diff --git a/arch/xtensa/variants/s6000/include/variant/hardware.h b/arch/xtensa/variants/s6000/include/variant/hardware.h
new file mode 100644
index 00000000..5d9ba098
--- /dev/null
+++ b/arch/xtensa/variants/s6000/include/variant/hardware.h
@@ -0,0 +1,259 @@
+#ifndef __XTENSA_S6000_HARDWARE_H
+#define __XTENSA_S6000_HARDWARE_H
+
+#define S6_SCLK			1843200
+
+#define S6_MEM_REG              0x20000000
+#define S6_MEM_EFI              0x33F00000
+#define S6_MEM_PCIE_DATARAM1    0x34000000
+#define S6_MEM_XLMI             0x37F80000
+#define S6_MEM_PIF_DATARAM1     0x37FFC000
+#define S6_MEM_GMAC             0x38000000
+#define S6_MEM_I2S              0x3A000000
+#define S6_MEM_EGIB             0x3C000000
+#define S6_MEM_PCIE_CFG         0x3E000000
+#define S6_MEM_PIF_DATARAM      0x3FFE0000
+#define S6_MEM_XLMI_DATARAM     0x3FFF0000
+#define S6_MEM_DDR              0x40000000
+#define S6_MEM_PCIE_APER        0xC0000000
+#define S6_MEM_AUX              0xF0000000
+
+/* Device addresses */
+
+#define S6_REG_SCB              S6_MEM_REG
+#define S6_REG_NB               (S6_REG_SCB + 0x10000)
+#define S6_REG_LMSDMA           (S6_REG_SCB + 0x20000)
+#define S6_REG_NI               (S6_REG_SCB + 0x30000)
+#define S6_REG_NIDMA            (S6_REG_SCB + 0x40000)
+#define S6_REG_NS               (S6_REG_SCB + 0x50000)
+#define S6_REG_DDR              (S6_REG_SCB + 0x60000)
+#define S6_REG_GREG1            (S6_REG_SCB + 0x70000)
+#define S6_REG_DP               (S6_REG_SCB + 0x80000)
+#define S6_REG_DPDMA            (S6_REG_SCB + 0x90000)
+#define S6_REG_EGIB             (S6_REG_SCB + 0xA0000)
+#define S6_REG_PCIE             (S6_REG_SCB + 0xB0000)
+#define S6_REG_I2S              (S6_REG_SCB + 0xC0000)
+#define S6_REG_GMAC             (S6_REG_SCB + 0xD0000)
+#define S6_REG_HIFDMA           (S6_REG_SCB + 0xE0000)
+#define S6_REG_GREG2            (S6_REG_SCB + 0xF0000)
+
+#define S6_REG_APB              S6_REG_SCB
+#define S6_REG_UART             (S6_REG_APB + 0x0000)
+#define S6_REG_INTC             (S6_REG_APB + 0x2000)
+#define S6_REG_SPI              (S6_REG_APB + 0x3000)
+#define S6_REG_I2C              (S6_REG_APB + 0x4000)
+#define S6_REG_GPIO             (S6_REG_APB + 0x8000)
+
+/* Global register block */
+
+#define S6_GREG1_PLL_LOCKCLEAR	0x000
+#define S6_GREG1_PLL_LOCK_SYS		0
+#define S6_GREG1_PLL_LOCK_IO		1
+#define S6_GREG1_PLL_LOCK_AIM		2
+#define S6_GREG1_PLL_LOCK_DP0		3
+#define S6_GREG1_PLL_LOCK_DP2		4
+#define S6_GREG1_PLL_LOCK_DDR		5
+#define S6_GREG1_PLL_LOCKSTAT	0x004
+#define S6_GREG1_PLL_LOCKSTAT_CURLOCK	0
+#define S6_GREG1_PLL_LOCKSTAT_EVERUNLCK	8
+#define S6_GREG1_PLLSEL		0x010
+#define S6_GREG1_PLLSEL_AIM		0
+#define S6_GREG1_PLLSEL_AIM_DDR2		0
+#define S6_GREG1_PLLSEL_AIM_300MHZ		1
+#define S6_GREG1_PLLSEL_AIM_240MHZ		2
+#define S6_GREG1_PLLSEL_AIM_200MHZ		3
+#define S6_GREG1_PLLSEL_AIM_150MHZ		4
+#define S6_GREG1_PLLSEL_AIM_120MHZ		5
+#define S6_GREG1_PLLSEL_AIM_40MHZ		6
+#define S6_GREG1_PLLSEL_AIM_PLLAIMREF		7
+#define S6_GREG1_PLLSEL_AIM_MASK		7
+#define S6_GREG1_PLLSEL_DDR		8
+#define S6_GREG1_PLLSEL_DDR_HS			0
+#define S6_GREG1_PLLSEL_DDR_333MHZ		1
+#define S6_GREG1_PLLSEL_DDR_250MHZ		2
+#define S6_GREG1_PLLSEL_DDR_200MHZ		3
+#define S6_GREG1_PLLSEL_DDR_167MHZ		4
+#define S6_GREG1_PLLSEL_DDR_100MHZ		5
+#define S6_GREG1_PLLSEL_DDR_33MHZ		6
+#define S6_GREG1_PLLSEL_DDR_PLLIOREF		7
+#define S6_GREG1_PLLSEL_DDR_MASK		7
+#define S6_GREG1_PLLSEL_GMAC		16
+#define S6_GREG1_PLLSEL_GMAC_125MHZ		0
+#define S6_GREG1_PLLSEL_GMAC_25MHZ		1
+#define S6_GREG1_PLLSEL_GMAC_2500KHZ		2
+#define S6_GREG1_PLLSEL_GMAC_EXTERN		3
+#define S6_GREG1_PLLSEL_GMAC_MASK		3
+#define S6_GREG1_PLLSEL_GMII		18
+#define S6_GREG1_PLLSEL_GMII_111MHZ		0
+#define S6_GREG1_PLLSEL_GMII_IOREF		1
+#define S6_GREG1_PLLSEL_GMII_NONE		2
+#define S6_GREG1_PLLSEL_GMII_125MHZ		3
+#define S6_GREG1_PLLSEL_GMII_MASK		3
+#define S6_GREG1_SYSUNLOCKCNT	0x020
+#define S6_GREG1_IOUNLOCKCNT	0x024
+#define S6_GREG1_AIMUNLOCKCNT	0x028
+#define S6_GREG1_DP0UNLOCKCNT	0x02C
+#define S6_GREG1_DP2UNLOCKCNT	0x030
+#define S6_GREG1_DDRUNLOCKCNT	0x034
+#define S6_GREG1_CLKBAL0	0x040
+#define S6_GREG1_CLKBAL0_LSGB		0
+#define S6_GREG1_CLKBAL0_LSPX		8
+#define S6_GREG1_CLKBAL0_MEMDO		16
+#define S6_GREG1_CLKBAL0_HSXT1		24
+#define S6_GREG1_CLKBAL1	0x044
+#define S6_GREG1_CLKBAL1_HSISEF		0
+#define S6_GREG1_CLKBAL1_HSNI		8
+#define S6_GREG1_CLKBAL1_HSNS		16
+#define S6_GREG1_CLKBAL1_HSISEFCFG	24
+#define S6_GREG1_CLKBAL2	0x048
+#define S6_GREG1_CLKBAL2_LSNB		0
+#define S6_GREG1_CLKBAL2_LSSB		8
+#define S6_GREG1_CLKBAL2_LSREST		24
+#define S6_GREG1_CLKBAL3	0x04C
+#define S6_GREG1_CLKBAL3_ISEFXAD	0
+#define S6_GREG1_CLKBAL3_ISEFLMS	8
+#define S6_GREG1_CLKBAL3_ISEFISEF	16
+#define S6_GREG1_CLKBAL3_DDRDD		24
+#define S6_GREG1_CLKBAL4	0x050
+#define S6_GREG1_CLKBAL4_DDRDP		0
+#define S6_GREG1_CLKBAL4_DDRDO		8
+#define S6_GREG1_CLKBAL4_DDRNB		16
+#define S6_GREG1_CLKBAL4_DDRLMS		24
+#define S6_GREG1_BLOCKENA	0x100
+#define S6_GREG1_BLOCK_DDR		0
+#define S6_GREG1_BLOCK_DP		1
+#define S6_GREG1_BLOCK_NSNI		2
+#define S6_GREG1_BLOCK_PCIE		3
+#define S6_GREG1_BLOCK_GMAC		4
+#define S6_GREG1_BLOCK_I2S		5
+#define S6_GREG1_BLOCK_EGIB		6
+#define S6_GREG1_BLOCK_SB		7
+#define S6_GREG1_BLOCK_XT1		8
+#define S6_GREG1_CLKGATE	0x104
+#define S6_GREG1_BGATE_AIMNORTH		9
+#define S6_GREG1_BGATE_AIMEAST		10
+#define S6_GREG1_BGATE_AIMWEST		11
+#define S6_GREG1_BGATE_AIMSOUTH		12
+#define S6_GREG1_CHIPRES	0x108
+#define S6_GREG1_CHIPRES_SOFTRES	0
+#define S6_GREG1_CHIPRES_LOSTLOCK	1
+#define S6_GREG1_RESETCAUSE	0x10C
+#define S6_GREG1_RESETCAUSE_RESETN	0
+#define S6_GREG1_RESETCAUSE_GLOBAL	1
+#define S6_GREG1_RESETCAUSE_WDOGTIMER	2
+#define S6_GREG1_RESETCAUSE_SWCHIP	3
+#define S6_GREG1_RESETCAUSE_PLLSYSLOSS	4
+#define S6_GREG1_RESETCAUSE_PCIE	5
+#define S6_GREG1_RESETCAUSE_CREATEDGLOB	6
+#define S6_GREG1_REFCLOCKCNT	0x110
+#define S6_GREG1_RESETTIMER	0x114
+#define S6_GREG1_NMITIMER	0x118
+#define S6_GREG1_GLOBAL_TIMER	0x11C
+#define S6_GREG1_TIMER0		0x180
+#define S6_GREG1_TIMER1		0x184
+#define S6_GREG1_UARTCLOCKSEL	0x204
+#define S6_GREG1_CHIPVERSPACKG	0x208
+#define S6_GREG1_CHIPVERSPACKG_CHIPVID	0
+#define S6_GREG1_CHIPVERSPACKG_PACKSEL	8
+#define S6_GREG1_ONDIETERMCTRL	0x20C
+#define S6_GREG1_ONDIETERMCTRL_WEST	0
+#define S6_GREG1_ONDIETERMCTRL_NORTH	2
+#define S6_GREG1_ONDIETERMCTRL_EAST	4
+#define S6_GREG1_ONDIETERMCTRL_SOUTH	6
+#define S6_GREG1_ONDIETERMCTRL_NONE		0
+#define S6_GREG1_ONDIETERMCTRL_75OHM		2
+#define S6_GREG1_ONDIETERMCTRL_MASK		3
+#define S6_GREG1_BOOT_CFG0	0x210
+#define S6_GREG1_BOOT_CFG0_AIMSTRONG	1
+#define S6_GREG1_BOOT_CFG0_MINIBOOTDL	2
+#define S6_GREG1_BOOT_CFG0_OCDGPIO8SET	5
+#define S6_GREG1_BOOT_CFG0_OCDGPIOENA	6
+#define S6_GREG1_BOOT_CFG0_DOWNSTREAM	7
+#define S6_GREG1_BOOT_CFG0_PLLSYSDIV	8
+#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_300MHZ	1
+#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_240MHZ	2
+#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_200MHZ	3
+#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_150MHZ	4
+#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_120MHZ	5
+#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_40MHZ	6
+#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_MASK	7
+#define S6_GREG1_BOOT_CFG0_BALHSLMS	12
+#define S6_GREG1_BOOT_CFG0_BALHSNB	18
+#define S6_GREG1_BOOT_CFG0_BALHSXAD	24
+#define S6_GREG1_BOOT_CFG1	0x214
+#define S6_GREG1_BOOT_CFG1_PCIE1LANE	1
+#define S6_GREG1_BOOT_CFG1_MPLLPRESCALE	2
+#define S6_GREG1_BOOT_CFG1_MPLLNCY	4
+#define S6_GREG1_BOOT_CFG1_MPLLNCY5	9
+#define S6_GREG1_BOOT_CFG1_BALHSREST	14
+#define S6_GREG1_BOOT_CFG1_BALHSPSMEMS	20
+#define S6_GREG1_BOOT_CFG1_BALLSGI	26
+#define S6_GREG1_BOOT_CFG2	0x218
+#define S6_GREG1_BOOT_CFG2_PEID		0
+#define S6_GREG1_BOOT_CFG3	0x21C
+#define S6_GREG1_DRAMBUSYHOLDOF	0x220
+#define S6_GREG1_DRAMBUSYHOLDOF_XT0	0
+#define S6_GREG1_DRAMBUSYHOLDOF_XT1	4
+#define S6_GREG1_DRAMBUSYHOLDOF_XT_MASK		7
+#define S6_GREG1_PCIEBAR1SIZE	0x224
+#define S6_GREG1_PCIEBAR2SIZE	0x228
+#define S6_GREG1_PCIEVENDOR	0x22C
+#define S6_GREG1_PCIEDEVICE	0x230
+#define S6_GREG1_PCIEREV	0x234
+#define S6_GREG1_PCIECLASS	0x238
+#define S6_GREG1_XT1DCACHEMISS	0x240
+#define S6_GREG1_XT1ICACHEMISS	0x244
+#define S6_GREG1_HWSEMAPHORE(n)	(0x400 + 4 * (n))
+#define S6_GREG1_HWSEMAPHORE_NB		16
+
+/* peripheral interrupt numbers */
+
+#define S6_INTC_GPIO(n)			(n)		/* 0..3 */
+#define S6_INTC_I2C			4
+#define S6_INTC_SPI			5
+#define S6_INTC_NB_ERR			6
+#define S6_INTC_DMA_LMSERR		7
+#define S6_INTC_DMA_LMSLOWWMRK(n)	(8 + (n))	/* 0..11 */
+#define S6_INTC_DMA_LMSPENDCNT(n)	(20 + (n))	/* 0..11 */
+#define S6_INTC_DMA HOSTLOWWMRK(n)	(32 + (n))	/* 0..6 */
+#define S6_INTC_DMA_HOSTPENDCNT(n)	(39 + (n))	/* 0..6 */
+#define S6_INTC_DMA_HOSTERR		46
+#define S6_INTC_UART(n)			(47 + (n))	/* 0..1 */
+#define S6_INTC_XAD			49
+#define S6_INTC_NI_ERR			50
+#define S6_INTC_NI_INFIFOFULL		51
+#define S6_INTC_DMA_NIERR		52
+#define S6_INTC_DMA_NILOWWMRK(n)	(53 + (n))	/* 0..3 */
+#define S6_INTC_DMA_NIPENDCNT(n)	(57 + (n))	/* 0..3 */
+#define S6_INTC_DDR			61
+#define S6_INTC_NS_ERR			62
+#define S6_INTC_EFI_CFGERR		63
+#define S6_INTC_EFI_ISEFTEST		64
+#define S6_INTC_EFI_WRITEERR		65
+#define S6_INTC_NMI_TIMER		66
+#define S6_INTC_PLLLOCK_SYS		67
+#define S6_INTC_PLLLOCK_IO		68
+#define S6_INTC_PLLLOCK_AIM		69
+#define S6_INTC_PLLLOCK_DP0		70
+#define S6_INTC_PLLLOCK_DP2		71
+#define S6_INTC_I2S_ERR			72
+#define S6_INTC_GMAC_STAT		73
+#define S6_INTC_GMAC_ERR		74
+#define S6_INTC_GIB_ERR			75
+#define S6_INTC_PCIE_ERR		76
+#define S6_INTC_PCIE_MSI(n)		(77 + (n))	/* 0..3 */
+#define S6_INTC_PCIE_INTA		81
+#define S6_INTC_PCIE_INTB		82
+#define S6_INTC_PCIE_INTC		83
+#define S6_INTC_PCIE_INTD		84
+#define S6_INTC_SW(n)			(85 + (n))	/* 0..9 */
+#define S6_INTC_SW_ENABLE(n)		(85 + 256 + (n))
+#define S6_INTC_DMA_DP_ERR		95
+#define S6_INTC_DMA_DPLOWWMRK(n)	(96 + (n))	/* 0..3 */
+#define S6_INTC_DMA_DPPENDCNT(n)	(100 + (n))	/* 0..3 */
+#define S6_INTC_DMA_DPTERMCNT(n)	(104 + (n))	/* 0..3 */
+#define S6_INTC_TIMER0			108
+#define S6_INTC_TIMER1			109
+#define S6_INTC_DMA_HOSTTERMCNT(n)	(110 + (n))	/* 0..6 */
+
+#endif /* __XTENSA_S6000_HARDWARE_H */
diff --git a/arch/xtensa/variants/s6000/include/variant/irq.h b/arch/xtensa/variants/s6000/include/variant/irq.h
new file mode 100644
index 00000000..97d6fc48
--- /dev/null
+++ b/arch/xtensa/variants/s6000/include/variant/irq.h
@@ -0,0 +1,9 @@
+#ifndef _XTENSA_S6000_IRQ_H
+#define _XTENSA_S6000_IRQ_H
+
+#define NO_IRQ		(-1)
+#define VARIANT_NR_IRQS 8 /* GPIO interrupts */
+
+extern void variant_irq_enable(unsigned int irq);
+
+#endif /* __XTENSA_S6000_IRQ_H */
diff --git a/arch/xtensa/variants/s6000/include/variant/tie-asm.h b/arch/xtensa/variants/s6000/include/variant/tie-asm.h
new file mode 100644
index 00000000..f02d0a3a
--- /dev/null
+++ b/arch/xtensa/variants/s6000/include/variant/tie-asm.h
@@ -0,0 +1,304 @@
+/*
+ * This header file contains assembly-language definitions (assembly
+ * macros, etc.) for this specific Xtensa processor's TIE extensions
+ * and options.  It is customized to this Xtensa processor configuration.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999-2008 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_CORE_TIE_ASM_H
+#define _XTENSA_CORE_TIE_ASM_H
+
+/*  Selection parameter values for save-area save/restore macros:  */
+/*  Option vs. TIE:  */
+#define XTHAL_SAS_TIE	0x0001	/* custom extension or coprocessor */
+#define XTHAL_SAS_OPT	0x0002	/* optional (and not a coprocessor) */
+/*  Whether used automatically by compiler:  */
+#define XTHAL_SAS_NOCC	0x0004	/* not used by compiler w/o special opts/code */
+#define XTHAL_SAS_CC	0x0008	/* used by compiler without special opts/code */
+/*  ABI handling across function calls:  */
+#define XTHAL_SAS_CALR	0x0010	/* caller-saved */
+#define XTHAL_SAS_CALE	0x0020	/* callee-saved */
+#define XTHAL_SAS_GLOB	0x0040	/* global across function calls (in thread) */
+/*  Misc  */
+#define XTHAL_SAS_ALL	0xFFFF	/* include all default NCP contents */
+
+
+
+/* Macro to save all non-coprocessor (extra) custom TIE and optional state
+ * (not including zero-overhead loop registers).
+ * Save area ptr (clobbered):  ptr  (16 byte aligned)
+ * Scratch regs  (clobbered):  at1..at4  (only first XCHAL_NCP_NUM_ATMPS needed)
+ */
+	.macro xchal_ncp_store  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL
+	xchal_sa_start	\continue, \ofs
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
+	xchal_sa_align	\ptr, 0, 1024-4, 4, 4
+	rsr	\at1, BR		// boolean option
+	s32i	\at1, \ptr, .Lxchal_ofs_ + 0
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.endif
+	.endm	// xchal_ncp_store
+
+/* Macro to save all non-coprocessor (extra) custom TIE and optional state
+ * (not including zero-overhead loop registers).
+ * Save area ptr (clobbered):  ptr  (16 byte aligned)
+ * Scratch regs  (clobbered):  at1..at4  (only first XCHAL_NCP_NUM_ATMPS needed)
+ */
+	.macro xchal_ncp_load  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL
+	xchal_sa_start	\continue, \ofs
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
+	xchal_sa_align	\ptr, 0, 1024-4, 4, 4
+	l32i	\at1, \ptr, .Lxchal_ofs_ + 0
+	wsr	\at1, BR		// boolean option
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.endif
+	.endm	// xchal_ncp_load
+
+
+
+#define XCHAL_NCP_NUM_ATMPS	1
+
+
+
+/* Macro to save the state of TIE coprocessor FPU.
+ * Save area ptr (clobbered):  ptr  (16 byte aligned)
+ * Scratch regs  (clobbered):  at1..at4  (only first XCHAL_CP0_NUM_ATMPS needed)
+ */
+#define xchal_cp_FPU_store	xchal_cp0_store
+/* #define xchal_cp_FPU_store_a2	xchal_cp0_store a2 a3 a4 a5 a6 */
+	.macro	xchal_cp0_store  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL
+	xchal_sa_start \continue, \ofs
+	.ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
+	xchal_sa_align	\ptr, 0, 0, 1, 16
+	rur232	\at1		// FCR
+	s32i	\at1, \ptr, 0
+	rur233	\at1		// FSR
+	s32i	\at1, \ptr, 4
+	SSI f0, \ptr,  8
+	SSI f1, \ptr,  12
+	SSI f2, \ptr,  16
+	SSI f3, \ptr,  20
+	SSI f4, \ptr,  24
+	SSI f5, \ptr,  28
+	SSI f6, \ptr,  32
+	SSI f7, \ptr,  36
+	SSI f8, \ptr,  40
+	SSI f9, \ptr,  44
+	SSI f10, \ptr,  48
+	SSI f11, \ptr,  52
+	SSI f12, \ptr,  56
+	SSI f13, \ptr,  60
+	SSI f14, \ptr,  64
+	SSI f15, \ptr,  68
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 72
+	.endif
+	.endm	// xchal_cp0_store
+
+/* Macro to restore the state of TIE coprocessor FPU.
+ * Save area ptr (clobbered):  ptr  (16 byte aligned)
+ * Scratch regs  (clobbered):  at1..at4  (only first XCHAL_CP0_NUM_ATMPS needed)
+ */
+#define xchal_cp_FPU_load	xchal_cp0_load
+/* #define xchal_cp_FPU_load_a2	xchal_cp0_load a2 a3 a4 a5 a6 */
+	.macro	xchal_cp0_load  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL
+	xchal_sa_start \continue, \ofs
+	.ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
+	xchal_sa_align	\ptr, 0, 0, 1, 16
+	l32i	\at1, \ptr, 0
+	wur232	\at1		// FCR
+	l32i	\at1, \ptr, 4
+	wur233	\at1		// FSR
+	LSI f0, \ptr,  8
+	LSI f1, \ptr,  12
+	LSI f2, \ptr,  16
+	LSI f3, \ptr,  20
+	LSI f4, \ptr,  24
+	LSI f5, \ptr,  28
+	LSI f6, \ptr,  32
+	LSI f7, \ptr,  36
+	LSI f8, \ptr,  40
+	LSI f9, \ptr,  44
+	LSI f10, \ptr,  48
+	LSI f11, \ptr,  52
+	LSI f12, \ptr,  56
+	LSI f13, \ptr,  60
+	LSI f14, \ptr,  64
+	LSI f15, \ptr,  68
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 72
+	.endif
+	.endm	// xchal_cp0_load
+
+#define XCHAL_CP0_NUM_ATMPS	1
+
+/* Macro to save the state of TIE coprocessor XAD.
+ * Save area ptr (clobbered):  ptr  (16 byte aligned)
+ * Scratch regs  (clobbered):  at1..at4  (only first XCHAL_CP6_NUM_ATMPS needed)
+ */
+#define xchal_cp_XAD_store	xchal_cp6_store
+/* #define xchal_cp_XAD_store_a2	xchal_cp6_store a2 a3 a4 a5 a6 */
+	.macro	xchal_cp6_store  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL
+	xchal_sa_start \continue, \ofs
+	.ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
+	xchal_sa_align	\ptr, 0, 0, 1, 16
+	rur0	\at1		// LDCBHI
+	s32i	\at1, \ptr, 0
+	rur1	\at1		// LDCBLO
+	s32i	\at1, \ptr, 4
+	rur2	\at1		// STCBHI
+	s32i	\at1, \ptr, 8
+	rur3	\at1		// STCBLO
+	s32i	\at1, \ptr, 12
+	rur8	\at1		// LDBRBASE
+	s32i	\at1, \ptr, 16
+	rur9	\at1		// LDBROFF
+	s32i	\at1, \ptr, 20
+	rur10	\at1		// LDBRINC
+	s32i	\at1, \ptr, 24
+	rur11	\at1		// STBRBASE
+	s32i	\at1, \ptr, 28
+	rur12	\at1		// STBROFF
+	s32i	\at1, \ptr, 32
+	rur13	\at1		// STBRINC
+	s32i	\at1, \ptr, 36
+	rur24	\at1		// SCRATCH0
+	s32i	\at1, \ptr, 40
+	rur25	\at1		// SCRATCH1
+	s32i	\at1, \ptr, 44
+	rur26	\at1		// SCRATCH2
+	s32i	\at1, \ptr, 48
+	rur27	\at1		// SCRATCH3
+	s32i	\at1, \ptr, 52
+	WRAS128I wra0, \ptr,  64
+	WRAS128I wra1, \ptr,  80
+	WRAS128I wra2, \ptr,  96
+	WRAS128I wra3, \ptr,  112
+	WRAS128I wra4, \ptr,  128
+	WRAS128I wra5, \ptr,  144
+	WRAS128I wra6, \ptr,  160
+	WRAS128I wra7, \ptr,  176
+	WRAS128I wra8, \ptr,  192
+	WRAS128I wra9, \ptr,  208
+	WRAS128I wra10, \ptr,  224
+	WRAS128I wra11, \ptr,  240
+	WRAS128I wra12, \ptr,  256
+	WRAS128I wra13, \ptr,  272
+	WRAS128I wra14, \ptr,  288
+	WRAS128I wra15, \ptr,  304
+	WRBS128I wrb0, \ptr,  320
+	WRBS128I wrb1, \ptr,  336
+	WRBS128I wrb2, \ptr,  352
+	WRBS128I wrb3, \ptr,  368
+	WRBS128I wrb4, \ptr,  384
+	WRBS128I wrb5, \ptr,  400
+	WRBS128I wrb6, \ptr,  416
+	WRBS128I wrb7, \ptr,  432
+	WRBS128I wrb8, \ptr,  448
+	WRBS128I wrb9, \ptr,  464
+	WRBS128I wrb10, \ptr,  480
+	WRBS128I wrb11, \ptr,  496
+	WRBS128I wrb12, \ptr,  512
+	WRBS128I wrb13, \ptr,  528
+	WRBS128I wrb14, \ptr,  544
+	WRBS128I wrb15, \ptr,  560
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 576
+	.endif
+	.endm	// xchal_cp6_store
+
+/* Macro to restore the state of TIE coprocessor XAD.
+ * Save area ptr (clobbered):  ptr  (16 byte aligned)
+ * Scratch regs  (clobbered):  at1..at4  (only first XCHAL_CP6_NUM_ATMPS needed)
+ */
+#define xchal_cp_XAD_load	xchal_cp6_load
+/* #define xchal_cp_XAD_load_a2	xchal_cp6_load a2 a3 a4 a5 a6 */
+	.macro	xchal_cp6_load  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL
+	xchal_sa_start \continue, \ofs
+	.ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
+	xchal_sa_align	\ptr, 0, 0, 1, 16
+	l32i	\at1, \ptr, 0
+	wur0	\at1		// LDCBHI
+	l32i	\at1, \ptr, 4
+	wur1	\at1		// LDCBLO
+	l32i	\at1, \ptr, 8
+	wur2	\at1		// STCBHI
+	l32i	\at1, \ptr, 12
+	wur3	\at1		// STCBLO
+	l32i	\at1, \ptr, 16
+	wur8	\at1		// LDBRBASE
+	l32i	\at1, \ptr, 20
+	wur9	\at1		// LDBROFF
+	l32i	\at1, \ptr, 24
+	wur10	\at1		// LDBRINC
+	l32i	\at1, \ptr, 28
+	wur11	\at1		// STBRBASE
+	l32i	\at1, \ptr, 32
+	wur12	\at1		// STBROFF
+	l32i	\at1, \ptr, 36
+	wur13	\at1		// STBRINC
+	l32i	\at1, \ptr, 40
+	wur24	\at1		// SCRATCH0
+	l32i	\at1, \ptr, 44
+	wur25	\at1		// SCRATCH1
+	l32i	\at1, \ptr, 48
+	wur26	\at1		// SCRATCH2
+	l32i	\at1, \ptr, 52
+	wur27	\at1		// SCRATCH3
+	WRBL128I wrb0, \ptr,  320
+	WRBL128I wrb1, \ptr,  336
+	WRBL128I wrb2, \ptr,  352
+	WRBL128I wrb3, \ptr,  368
+	WRBL128I wrb4, \ptr,  384
+	WRBL128I wrb5, \ptr,  400
+	WRBL128I wrb6, \ptr,  416
+	WRBL128I wrb7, \ptr,  432
+	WRBL128I wrb8, \ptr,  448
+	WRBL128I wrb9, \ptr,  464
+	WRBL128I wrb10, \ptr,  480
+	WRBL128I wrb11, \ptr,  496
+	WRBL128I wrb12, \ptr,  512
+	WRBL128I wrb13, \ptr,  528
+	WRBL128I wrb14, \ptr,  544
+	WRBL128I wrb15, \ptr,  560
+	WRAL128I wra0, \ptr,  64
+	WRAL128I wra1, \ptr,  80
+	WRAL128I wra2, \ptr,  96
+	WRAL128I wra3, \ptr,  112
+	WRAL128I wra4, \ptr,  128
+	WRAL128I wra5, \ptr,  144
+	WRAL128I wra6, \ptr,  160
+	WRAL128I wra7, \ptr,  176
+	WRAL128I wra8, \ptr,  192
+	WRAL128I wra9, \ptr,  208
+	WRAL128I wra10, \ptr,  224
+	WRAL128I wra11, \ptr,  240
+	WRAL128I wra12, \ptr,  256
+	WRAL128I wra13, \ptr,  272
+	WRAL128I wra14, \ptr,  288
+	WRAL128I wra15, \ptr,  304
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 576
+	.endif
+	.endm	// xchal_cp6_load
+
+#define XCHAL_CP6_NUM_ATMPS	1
+#define XCHAL_SA_NUM_ATMPS	1
+
+	/*  Empty macros for unconfigured coprocessors:  */
+	.macro xchal_cp1_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp1_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp2_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp2_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp3_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp3_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp4_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp4_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp5_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp5_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp7_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp7_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+
+#endif /*_XTENSA_CORE_TIE_ASM_H*/
+
diff --git a/arch/xtensa/variants/s6000/include/variant/tie.h b/arch/xtensa/variants/s6000/include/variant/tie.h
new file mode 100644
index 00000000..be7ea843
--- /dev/null
+++ b/arch/xtensa/variants/s6000/include/variant/tie.h
@@ -0,0 +1,191 @@
+/*
+ * This header file describes this specific Xtensa processor's TIE extensions
+ * that extend basic Xtensa core functionality.  It is customized to this
+ * Xtensa processor configuration.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999-2008 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_CORE_TIE_H
+#define _XTENSA_CORE_TIE_H
+
+#define XCHAL_CP_NUM			2	/* number of coprocessors */
+#define XCHAL_CP_MAX			7	/* max CP ID + 1 (0 if none) */
+#define XCHAL_CP_MASK			0x41	/* bitmask of all CPs by ID */
+#define XCHAL_CP_PORT_MASK		0x00	/* bitmask of only port CPs */
+
+/*  Basic parameters of each coprocessor:  */
+#define XCHAL_CP0_NAME			"FPU"
+#define XCHAL_CP0_IDENT			FPU
+#define XCHAL_CP0_SA_SIZE		72	/* size of state save area */
+#define XCHAL_CP0_SA_ALIGN		4	/* min alignment of save area */
+#define XCHAL_CP_ID_FPU			0	/* coprocessor ID (0..7) */
+#define XCHAL_CP6_NAME			"XAD"
+#define XCHAL_CP6_IDENT			XAD
+#define XCHAL_CP6_SA_SIZE		576	/* size of state save area */
+#define XCHAL_CP6_SA_ALIGN		16	/* min alignment of save area */
+#define XCHAL_CP_ID_XAD			6	/* coprocessor ID (0..7) */
+
+/*  Filler info for unassigned coprocessors, to simplify arrays etc:  */
+#define XCHAL_CP1_SA_SIZE		0
+#define XCHAL_CP1_SA_ALIGN		1
+#define XCHAL_CP2_SA_SIZE		0
+#define XCHAL_CP2_SA_ALIGN		1
+#define XCHAL_CP3_SA_SIZE		0
+#define XCHAL_CP3_SA_ALIGN		1
+#define XCHAL_CP4_SA_SIZE		0
+#define XCHAL_CP4_SA_ALIGN		1
+#define XCHAL_CP5_SA_SIZE		0
+#define XCHAL_CP5_SA_ALIGN		1
+#define XCHAL_CP7_SA_SIZE		0
+#define XCHAL_CP7_SA_ALIGN		1
+
+/*  Save area for non-coprocessor optional and custom (TIE) state:  */
+#define XCHAL_NCP_SA_SIZE		4
+#define XCHAL_NCP_SA_ALIGN		4
+
+/*  Total save area for optional and custom state (NCP + CPn):  */
+#define XCHAL_TOTAL_SA_SIZE		672	/* with 16-byte align padding */
+#define XCHAL_TOTAL_SA_ALIGN		16	/* actual minimum alignment */
+
+/*
+ * Detailed contents of save areas.
+ * NOTE:  caller must define the XCHAL_SA_REG macro (not defined here)
+ * before expanding the XCHAL_xxx_SA_LIST() macros.
+ *
+ * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize,
+ *		dbnum,base,regnum,bitsz,gapsz,reset,x...)
+ *
+ *	s = passed from XCHAL_*_LIST(s), eg. to select how to expand
+ *	ccused = set if used by compiler without special options or code
+ *	abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global)
+ *	kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg)
+ *	opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg)
+ *	name = lowercase reg name (no quotes)
+ *	galign = group byte alignment (power of 2) (galign >= align)
+ *	align = register byte alignment (power of 2)
+ *	asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz)
+ *	  (not including any pad bytes required to galign this or next reg)
+ *	dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>)
+ *	base = reg shortname w/o index (or sr=special, ur=TIE user reg)
+ *	regnum = reg index in regfile, or special/TIE-user reg number
+ *	bitsz = number of significant bits (regfile width, or ur/sr mask bits)
+ *	gapsz = intervening bits, if bitsz bits not stored contiguously
+ *	(padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize)
+ *	reset = register reset value (or 0 if undefined at reset)
+ *	x = reserved for future use (0 until then)
+ *
+ *  To filter out certain registers, e.g. to expand only the non-global
+ *  registers used by the compiler, you can do something like this:
+ *
+ *  #define XCHAL_SA_REG(s,ccused,p...)	SELCC##ccused(p)
+ *  #define SELCC0(p...)
+ *  #define SELCC1(abikind,p...)	SELAK##abikind(p)
+ *  #define SELAK0(p...)		REG(p)
+ *  #define SELAK1(p...)		REG(p)
+ *  #define SELAK2(p...)
+ *  #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \
+ *		...what you want to expand...
+ */
+
+#define XCHAL_NCP_SA_NUM	1
+#define XCHAL_NCP_SA_LIST(s)	\
+ XCHAL_SA_REG(s,0,0,0,1,             br, 4, 4, 4,0x0204,  sr,4  , 16,0,0,0)
+
+#define XCHAL_CP0_SA_NUM	18
+#define XCHAL_CP0_SA_LIST(s)	\
+ XCHAL_SA_REG(s,0,0,1,0,            fcr, 4, 4, 4,0x03E8,  ur,232, 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,            fsr, 4, 4, 4,0x03E9,  ur,233, 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,             f0, 4, 4, 4,0x0030,   f,0  , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,             f1, 4, 4, 4,0x0031,   f,1  , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,             f2, 4, 4, 4,0x0032,   f,2  , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,             f3, 4, 4, 4,0x0033,   f,3  , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,             f4, 4, 4, 4,0x0034,   f,4  , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,             f5, 4, 4, 4,0x0035,   f,5  , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,             f6, 4, 4, 4,0x0036,   f,6  , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,             f7, 4, 4, 4,0x0037,   f,7  , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,             f8, 4, 4, 4,0x0038,   f,8  , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,             f9, 4, 4, 4,0x0039,   f,9  , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,            f10, 4, 4, 4,0x003A,   f,10 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,            f11, 4, 4, 4,0x003B,   f,11 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,            f12, 4, 4, 4,0x003C,   f,12 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,            f13, 4, 4, 4,0x003D,   f,13 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,            f14, 4, 4, 4,0x003E,   f,14 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,            f15, 4, 4, 4,0x003F,   f,15 , 32,0,0,0)
+
+#define XCHAL_CP1_SA_NUM	0
+#define XCHAL_CP1_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP2_SA_NUM	0
+#define XCHAL_CP2_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP3_SA_NUM	0
+#define XCHAL_CP3_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP4_SA_NUM	0
+#define XCHAL_CP4_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP5_SA_NUM	0
+#define XCHAL_CP5_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP6_SA_NUM	46
+#define XCHAL_CP6_SA_LIST(s)	\
+ XCHAL_SA_REG(s,0,0,1,0,         ldcbhi,16, 4, 4,0x0300,  ur,0  , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,         ldcblo, 4, 4, 4,0x0301,  ur,1  , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,         stcbhi, 4, 4, 4,0x0302,  ur,2  , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,         stcblo, 4, 4, 4,0x0303,  ur,3  , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,       ldbrbase, 4, 4, 4,0x0308,  ur,8  , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,        ldbroff, 4, 4, 4,0x0309,  ur,9  , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,        ldbrinc, 4, 4, 4,0x030A,  ur,10 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,       stbrbase, 4, 4, 4,0x030B,  ur,11 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,        stbroff, 4, 4, 4,0x030C,  ur,12 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,        stbrinc, 4, 4, 4,0x030D,  ur,13 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,       scratch0, 4, 4, 4,0x0318,  ur,24 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,       scratch1, 4, 4, 4,0x0319,  ur,25 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,       scratch2, 4, 4, 4,0x031A,  ur,26 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,       scratch3, 4, 4, 4,0x031B,  ur,27 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           wra0,16,16,16,0x1010, wra,0  ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           wra1,16,16,16,0x1011, wra,1  ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           wra2,16,16,16,0x1012, wra,2  ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           wra3,16,16,16,0x1013, wra,3  ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           wra4,16,16,16,0x1014, wra,4  ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           wra5,16,16,16,0x1015, wra,5  ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           wra6,16,16,16,0x1016, wra,6  ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           wra7,16,16,16,0x1017, wra,7  ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           wra8,16,16,16,0x1018, wra,8  ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           wra9,16,16,16,0x1019, wra,9  ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,          wra10,16,16,16,0x101A, wra,10 ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,          wra11,16,16,16,0x101B, wra,11 ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,          wra12,16,16,16,0x101C, wra,12 ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,          wra13,16,16,16,0x101D, wra,13 ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,          wra14,16,16,16,0x101E, wra,14 ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,          wra15,16,16,16,0x101F, wra,15 ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           wrb0,16,16,16,0x1020, wrb,0  ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           wrb1,16,16,16,0x1021, wrb,1  ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           wrb2,16,16,16,0x1022, wrb,2  ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           wrb3,16,16,16,0x1023, wrb,3  ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           wrb4,16,16,16,0x1024, wrb,4  ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           wrb5,16,16,16,0x1025, wrb,5  ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           wrb6,16,16,16,0x1026, wrb,6  ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           wrb7,16,16,16,0x1027, wrb,7  ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           wrb8,16,16,16,0x1028, wrb,8  ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           wrb9,16,16,16,0x1029, wrb,9  ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,          wrb10,16,16,16,0x102A, wrb,10 ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,          wrb11,16,16,16,0x102B, wrb,11 ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,          wrb12,16,16,16,0x102C, wrb,12 ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,          wrb13,16,16,16,0x102D, wrb,13 ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,          wrb14,16,16,16,0x102E, wrb,14 ,128,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,          wrb15,16,16,16,0x102F, wrb,15 ,128,0,0,0)
+
+#define XCHAL_CP7_SA_NUM	0
+#define XCHAL_CP7_SA_LIST(s)	/* empty */
+
+/* Byte length of instruction from its first nibble (op0 field), per FLIX.  */
+#define XCHAL_OP0_FORMAT_LENGTHS	3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8
+
+#endif /*_XTENSA_CORE_TIE_H*/
+
diff --git a/arch/xtensa/variants/s6000/irq.c b/arch/xtensa/variants/s6000/irq.c
new file mode 100644
index 00000000..6651e328
--- /dev/null
+++ b/arch/xtensa/variants/s6000/irq.c
@@ -0,0 +1,74 @@
+/*
+ * s6000 irq crossbar
+ *
+ * Copyright (c) 2009 emlix GmbH
+ * Authors:	Johannes Weiner <jw@emlix.com>
+ *		Oskar Schirmer <os@emlix.com>
+ */
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <variant/hardware.h>
+
+/* S6_REG_INTC */
+#define INTC_STATUS	0x000
+#define INTC_RAW	0x010
+#define INTC_STATUS_AG	0x100
+#define INTC_CFG(n)	(0x200 + 4 * (n))
+
+/*
+ * The s6000 has a crossbar that multiplexes interrupt output lines
+ * from the peripherals to input lines on the xtensa core.
+ *
+ * We leave the mapping decisions to the platform as it depends on the
+ * actually connected peripherals which distribution makes sense.
+ */
+extern const signed char *platform_irq_mappings[NR_IRQS];
+
+static unsigned long scp_to_intc_enable[] = {
+#define	TO_INTC_ENABLE(n)	(((n) << 1) + 1)
+	TO_INTC_ENABLE(0),
+	TO_INTC_ENABLE(1),
+	TO_INTC_ENABLE(2),
+	TO_INTC_ENABLE(3),
+	TO_INTC_ENABLE(4),
+	TO_INTC_ENABLE(5),
+	TO_INTC_ENABLE(6),
+	TO_INTC_ENABLE(7),
+	TO_INTC_ENABLE(8),
+	TO_INTC_ENABLE(9),
+	TO_INTC_ENABLE(10),
+	TO_INTC_ENABLE(11),
+	TO_INTC_ENABLE(12),
+	-1,
+	-1,
+	TO_INTC_ENABLE(13),
+	-1,
+	TO_INTC_ENABLE(14),
+	-1,
+	TO_INTC_ENABLE(15),
+#undef	TO_INTC_ENABLE
+};
+
+static void irq_set(unsigned int irq, int enable)
+{
+	unsigned long en;
+	const signed char *m = platform_irq_mappings[irq];
+
+	if (!m)
+		return;
+	en = enable ? scp_to_intc_enable[irq] : 0;
+	while (*m >= 0) {
+		writel(en, S6_REG_INTC + INTC_CFG(*m));
+		m++;
+	}
+}
+
+void variant_irq_enable(unsigned int irq)
+{
+	irq_set(irq, 1);
+}
+
+void variant_irq_disable(unsigned int irq)
+{
+	irq_set(irq, 0);
+}