initial_commit

1 files changed, 266 insertions, 0 deletions

diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
new file mode 100644
index 00000000..c0deacae
--- /dev/null
+++ b/arch/arm/mach-davinci/Kconfig
@@ -0,0 +1,266 @@
+if ARCH_DAVINCI
+
+config AINTC
+	bool
+
+config CP_INTC
+	bool
+
+config ARCH_DAVINCI_DMx
+	select CPU_ARM926T
+	bool
+
+menu "TI DaVinci Implementations"
+
+comment "DaVinci Core Type"
+
+config ARCH_DAVINCI_DM644x
+	bool "DaVinci 644x based system"
+	select AINTC
+	select ARCH_DAVINCI_DMx
+
+config ARCH_DAVINCI_DM355
+	bool "DaVinci 355 based system"
+	select AINTC
+	select ARCH_DAVINCI_DMx
+
+config ARCH_DAVINCI_DM646x
+	bool "DaVinci 646x based system"
+	select AINTC
+	select ARCH_DAVINCI_DMx
+
+config ARCH_DAVINCI_DA830
+	bool "DA830/OMAP-L137/AM17x based system"
+	select CP_INTC
+	select ARCH_DAVINCI_DA8XX
+	select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
+
+config ARCH_DAVINCI_DA850
+	bool "DA850/OMAP-L138/AM18x based system"
+	select CP_INTC
+	select ARCH_DAVINCI_DA8XX
+	select ARCH_HAS_CPUFREQ
+
+config ARCH_DAVINCI_DA8XX
+	select CPU_ARM926T
+	bool
+
+config ARCH_DAVINCI_DM365
+	bool "DaVinci 365 based system"
+	select AINTC
+	select ARCH_DAVINCI_DMx
+
+config ARCH_DAVINCI_TNETV107X
+	select CPU_V6
+	select CP_INTC
+	bool "TNETV107X based system"
+
+comment "DaVinci Board Type"
+
+config MACH_DAVINCI_EVM
+	bool "TI DM644x EVM"
+	default ARCH_DAVINCI_DM644x
+	depends on ARCH_DAVINCI_DM644x
+	select MISC_DEVICES
+	select EEPROM_AT24
+	select I2C
+	help
+	  Configure this option to specify the whether the board used
+	  for development is a DM644x EVM
+
+config MACH_SFFSDR
+	bool "Lyrtech SFFSDR"
+	depends on ARCH_DAVINCI_DM644x
+	select MISC_DEVICES
+	select EEPROM_AT24
+	select I2C
+	help
+	  Say Y here to select the Lyrtech Small Form Factor
+	  Software Defined Radio (SFFSDR) board.
+
+config MACH_NEUROS_OSD2
+	bool "Neuros OSD2 Open Television Set Top Box"
+	depends on ARCH_DAVINCI_DM644x
+	help
+	  Configure this option to specify the whether the board used
+	  for development is a Neuros OSD2 Open Set Top Box.
+
+config MACH_DAVINCI_DM355_EVM
+	bool "TI DM355 EVM"
+	default ARCH_DAVINCI_DM355
+	depends on ARCH_DAVINCI_DM355
+	help
+	  Configure this option to specify the whether the board used
+	  for development is a DM355 EVM
+
+config MACH_DM355_LEOPARD
+	bool "DM355 Leopard board"
+	depends on ARCH_DAVINCI_DM355
+	help
+	  Configure this option to specify the whether the board used
+	  for development is a DM355 Leopard board.
+
+config MACH_DAVINCI_DM6467_EVM
+	bool "TI DM6467 EVM"
+	default ARCH_DAVINCI_DM646x
+	depends on ARCH_DAVINCI_DM646x
+	select MACH_DAVINCI_DM6467TEVM
+	select MISC_DEVICES
+	select EEPROM_AT24
+	select I2C
+	help
+	  Configure this option to specify the whether the board used
+	  for development is a DM6467 EVM
+
+config MACH_DAVINCI_DM6467TEVM
+	bool
+
+config MACH_DAVINCI_DM365_EVM
+	bool "TI DM365 EVM"
+	default ARCH_DAVINCI_DM365
+	depends on ARCH_DAVINCI_DM365
+	select MISC_DEVICES
+	select EEPROM_AT24
+	select I2C
+	help
+	  Configure this option to specify whether the board used
+	  for development is a DM365 EVM
+
+config MACH_DAVINCI_DA830_EVM
+	bool "TI DA830/OMAP-L137/AM17x Reference Platform"
+	default ARCH_DAVINCI_DA830
+	depends on ARCH_DAVINCI_DA830
+	select GPIO_PCF857X
+	select MISC_DEVICES
+	select EEPROM_AT24
+	select I2C
+	help
+	  Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
+
+choice
+	prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
+	depends on MACH_DAVINCI_DA830_EVM
+	help
+	  The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
+	  detected automatically based on successful probe of the I2C
+	  based GPIO expander on that board. This option selected in this
+	  menu has an effect only in case of a successful UI card detection.
+
+config DA830_UI_LCD
+	bool "LCD"
+	help
+	  Say Y here to use the LCD as a framebuffer or simple character
+	  display.
+
+config DA830_UI_NAND
+	bool "NAND flash"
+	help
+	  Say Y here to use the NAND flash. Do not forget to setup
+	  the switch correctly.
+endchoice
+
+config MACH_DAVINCI_DA850_EVM
+	bool "TI DA850/OMAP-L138/AM18x Reference Platform"
+	default ARCH_DAVINCI_DA850
+	depends on ARCH_DAVINCI_DA850
+	help
+	  Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
+
+choice
+	prompt "Select peripherals connected to expander on UI board"
+	depends on MACH_DAVINCI_DA850_EVM
+	help
+	  The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
+	  EVM is detected automatically based on successful probe of the I2C
+	  based GPIO expander on that card. This option selected in this
+	  menu has an effect only in case of a successful UI card detection.
+
+config DA850_UI_NONE
+	bool "No peripheral is enabled"
+	help
+	  Say Y if you do not want to enable any of the peripherals connected
+	  to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
+
+config DA850_UI_RMII
+	bool "RMII Ethernet PHY"
+	help
+	  Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
+	  EVM. This PHY is found on the UI daughter card that is supplied with
+	  the EVM.
+	  NOTE: Please take care while choosing this option, MII PHY will
+	  not be functional if RMII mode is selected.
+
+endchoice
+
+config GPIO_PCA953X
+	default MACH_DAVINCI_DA850_EVM
+
+config KEYBOARD_GPIO_POLLED
+	default MACH_DAVINCI_DA850_EVM
+
+config MACH_TNETV107X
+	bool "TI TNETV107X Reference Platform"
+	default ARCH_DAVINCI_TNETV107X
+	depends on ARCH_DAVINCI_TNETV107X
+	help
+	  Say Y here to select the TI TNETV107X Evaluation Module.
+
+config MACH_MITYOMAPL138
+	bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
+	depends on ARCH_DAVINCI_DA850
+	select MISC_DEVICES
+	select EEPROM_AT24
+	select I2C
+	help
+	  Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
+	  System on Module.  Information on this SoM may be found at
+	  http://www.mitydsp.com
+
+config MACH_OMAPL138_HAWKBOARD
+	bool "TI AM1808 / OMAPL-138 Hawkboard platform"
+	depends on ARCH_DAVINCI_DA850
+	help
+	  Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
+	  Information of this board may be found at
+	  http://www.hawkboard.org/
+
+config DAVINCI_MUX
+	bool "DAVINCI multiplexing support"
+	depends on ARCH_DAVINCI
+	default y
+	help
+	  Pin multiplexing support for DAVINCI boards. If your bootloader
+	  sets the multiplexing correctly, say N. Otherwise, or if unsure,
+	  say Y.
+
+config DAVINCI_MUX_DEBUG
+	bool "Multiplexing debug output"
+	depends on DAVINCI_MUX
+	help
+	  Makes the multiplexing functions print out a lot of debug info.
+	  This is useful if you want to find out the correct values of the
+	  multiplexing registers.
+
+config DAVINCI_MUX_WARNINGS
+	bool "Warn about pins the bootloader didn't set up"
+	depends on DAVINCI_MUX
+	help
+	  Choose Y here to warn whenever driver initialization logic needs
+	  to change the pin multiplexing setup. When there are no warnings
+	  printed, it's safe to deselect DAVINCI_MUX for your product.
+
+config DAVINCI_RESET_CLOCKS
+	bool "Reset unused clocks during boot"
+	depends on ARCH_DAVINCI
+	help
+	  Say Y if you want to reset unused clocks during boot.
+	  This option saves power, but assumes all drivers are
+	  using the clock framework. Broken drivers that do not
+	  yet use clock framework may not work with this option.
+	  If you are booting from another operating system, you
+	  probably do not want this option enabled until your
+	  device drivers work properly.
+
+endmenu
+
+endif