diff options
Diffstat (limited to 'include/media/v4l2-subdev.h')
| -rw-r--r-- | include/media/v4l2-subdev.h | 677 |
1 files changed, 677 insertions, 0 deletions
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h new file mode 100644 index 0000000..b8dff7c --- /dev/null +++ b/include/media/v4l2-subdev.h @@ -0,0 +1,677 @@ +/* + V4L2 sub-device support header. + + Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _V4L2_SUBDEV_H +#define _V4L2_SUBDEV_H + +#include <linux/types.h> +#include <linux/v4l2-subdev.h> +#include <media/media-entity.h> +#include <media/v4l2-common.h> +#include <media/v4l2-dev.h> +#include <media/v4l2-fh.h> +#include <media/v4l2-mediabus.h> + +/* generic v4l2_device notify callback notification values */ +#define V4L2_SUBDEV_IR_RX_NOTIFY _IOW('v', 0, u32) +#define V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ 0x00000001 +#define V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED 0x00000002 +#define V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN 0x00000004 +#define V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN 0x00000008 + +#define V4L2_SUBDEV_IR_TX_NOTIFY _IOW('v', 1, u32) +#define V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ 0x00000001 + +struct v4l2_device; +struct v4l2_ctrl_handler; +struct v4l2_event_subscription; +struct v4l2_fh; +struct v4l2_subdev; +struct v4l2_subdev_fh; +struct tuner_setup; +struct v4l2_mbus_frame_desc; + +/* decode_vbi_line */ +struct v4l2_decode_vbi_line { + u32 is_second_field; /* Set to 0 for the first (odd) field, + set to 1 for the second (even) field. */ + u8 *p; /* Pointer to the sliced VBI data from the decoder. + On exit points to the start of the payload. */ + u32 line; /* Line number of the sliced VBI data (1-23) */ + u32 type; /* VBI service type (V4L2_SLICED_*). 0 if no service found */ +}; + +/* Sub-devices are devices that are connected somehow to the main bridge + device. These devices are usually audio/video muxers/encoders/decoders or + sensors and webcam controllers. + + Usually these devices are controlled through an i2c bus, but other busses + may also be used. + + The v4l2_subdev struct provides a way of accessing these devices in a + generic manner. Most operations that these sub-devices support fall in + a few categories: core ops, audio ops, video ops and tuner ops. + + More categories can be added if needed, although this should remain a + limited set (no more than approx. 8 categories). + + Each category has its own set of ops that subdev drivers can implement. + + A subdev driver can leave the pointer to the category ops NULL if + it does not implement them (e.g. an audio subdev will generally not + implement the video category ops). The exception is the core category: + this must always be present. + + These ops are all used internally so it is no problem to change, remove + or add ops or move ops from one to another category. Currently these + ops are based on the original ioctls, but since ops are not limited to + one argument there is room for improvement here once all i2c subdev + drivers are converted to use these ops. + */ + +/* Core ops: it is highly recommended to implement at least these ops: + + g_chip_ident + log_status + g_register + s_register + + This provides basic debugging support. + + The ioctl ops is meant for generic ioctl-like commands. Depending on + the use-case it might be better to use subdev-specific ops (currently + not yet implemented) since ops provide proper type-checking. + */ + +/* Subdevice external IO pin configuration */ +#define V4L2_SUBDEV_IO_PIN_DISABLE (1 << 0) /* ENABLE assumed */ +#define V4L2_SUBDEV_IO_PIN_OUTPUT (1 << 1) +#define V4L2_SUBDEV_IO_PIN_INPUT (1 << 2) +#define V4L2_SUBDEV_IO_PIN_SET_VALUE (1 << 3) /* Set output value */ +#define V4L2_SUBDEV_IO_PIN_ACTIVE_LOW (1 << 4) /* ACTIVE HIGH assumed */ + +struct v4l2_subdev_io_pin_config { + u32 flags; /* V4L2_SUBDEV_IO_PIN_* flags for this pin's config */ + u8 pin; /* Chip external IO pin to configure */ + u8 function; /* Internal signal pad/function to route to IO pin */ + u8 value; /* Initial value for pin - e.g. GPIO output value */ + u8 strength; /* Pin drive strength */ +}; + +/* + s_io_pin_config: configure one or more chip I/O pins for chips that + multiplex different internal signal pads out to IO pins. This function + takes a pointer to an array of 'n' pin configuration entries, one for + each pin being configured. This function could be called at times + other than just subdevice initialization. + + init: initialize the sensor registers to some sort of reasonable default + values. Do not use for new drivers and should be removed in existing + drivers. + + load_fw: load firmware. + + reset: generic reset command. The argument selects which subsystems to + reset. Passing 0 will always reset the whole chip. Do not use for new + drivers without discussing this first on the linux-media mailinglist. + There should be no reason normally to reset a device. + + s_gpio: set GPIO pins. Very simple right now, might need to be extended with + a direction argument if needed. + + s_power: puts subdevice in power saving mode (on == 0) or normal operation + mode (on == 1). + + interrupt_service_routine: Called by the bridge chip's interrupt service + handler, when an interrupt status has be raised due to this subdev, + so that this subdev can handle the details. It may schedule work to be + performed later. It must not sleep. *Called from an IRQ context*. + */ +struct v4l2_subdev_core_ops { + int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip); + int (*log_status)(struct v4l2_subdev *sd); + int (*s_io_pin_config)(struct v4l2_subdev *sd, size_t n, + struct v4l2_subdev_io_pin_config *pincfg); + int (*init)(struct v4l2_subdev *sd, u32 val); + int (*load_fw)(struct v4l2_subdev *sd); + int (*reset)(struct v4l2_subdev *sd, u32 val); + int (*s_gpio)(struct v4l2_subdev *sd, u32 val); + int (*queryctrl)(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc); + int (*g_ctrl)(struct v4l2_subdev *sd, struct v4l2_control *ctrl); + int (*s_ctrl)(struct v4l2_subdev *sd, struct v4l2_control *ctrl); + int (*g_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls); + int (*s_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls); + int (*try_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls); + int (*querymenu)(struct v4l2_subdev *sd, struct v4l2_querymenu *qm); + int (*g_std)(struct v4l2_subdev *sd, v4l2_std_id *norm); + int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm); + long (*ioctl)(struct v4l2_subdev *sd, unsigned int cmd, void *arg); +#ifdef CPTCFG_VIDEO_ADV_DEBUG + int (*g_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg); + int (*s_register)(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg); +#endif + int (*s_power)(struct v4l2_subdev *sd, int on); + int (*interrupt_service_routine)(struct v4l2_subdev *sd, + u32 status, bool *handled); + int (*subscribe_event)(struct v4l2_subdev *sd, struct v4l2_fh *fh, + struct v4l2_event_subscription *sub); + int (*unsubscribe_event)(struct v4l2_subdev *sd, struct v4l2_fh *fh, + struct v4l2_event_subscription *sub); +}; + +/* s_radio: v4l device was opened in radio mode. + + g_frequency: freq->type must be filled in. Normally done by video_ioctl2 + or the bridge driver. + + g_tuner: + s_tuner: vt->type must be filled in. Normally done by video_ioctl2 or the + bridge driver. + + s_type_addr: sets tuner type and its I2C addr. + + s_config: sets tda9887 specific stuff, like port1, port2 and qss + */ +struct v4l2_subdev_tuner_ops { + int (*s_radio)(struct v4l2_subdev *sd); + int (*s_frequency)(struct v4l2_subdev *sd, const struct v4l2_frequency *freq); + int (*g_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq); + int (*g_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt); + int (*s_tuner)(struct v4l2_subdev *sd, const struct v4l2_tuner *vt); + int (*g_modulator)(struct v4l2_subdev *sd, struct v4l2_modulator *vm); + int (*s_modulator)(struct v4l2_subdev *sd, const struct v4l2_modulator *vm); + int (*s_type_addr)(struct v4l2_subdev *sd, struct tuner_setup *type); + int (*s_config)(struct v4l2_subdev *sd, const struct v4l2_priv_tun_config *config); +}; + +/* s_clock_freq: set the frequency (in Hz) of the audio clock output. + Used to slave an audio processor to the video decoder, ensuring that + audio and video remain synchronized. Usual values for the frequency + are 48000, 44100 or 32000 Hz. If the frequency is not supported, then + -EINVAL is returned. + + s_i2s_clock_freq: sets I2S speed in bps. This is used to provide a standard + way to select I2S clock used by driving digital audio streams at some + board designs. Usual values for the frequency are 1024000 and 2048000. + If the frequency is not supported, then -EINVAL is returned. + + s_routing: used to define the input and/or output pins of an audio chip, + and any additional configuration data. + Never attempt to use user-level input IDs (e.g. Composite, S-Video, + Tuner) at this level. An i2c device shouldn't know about whether an + input pin is connected to a Composite connector, become on another + board or platform it might be connected to something else entirely. + The calling driver is responsible for mapping a user-level input to + the right pins on the i2c device. + */ +struct v4l2_subdev_audio_ops { + int (*s_clock_freq)(struct v4l2_subdev *sd, u32 freq); + int (*s_i2s_clock_freq)(struct v4l2_subdev *sd, u32 freq); + int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config); + int (*s_stream)(struct v4l2_subdev *sd, int enable); +}; + +/* Indicates the @length field specifies maximum data length. */ +#define V4L2_MBUS_FRAME_DESC_FL_LEN_MAX (1U << 0) +/* Indicates user defined data format, i.e. non standard frame format. */ +#define V4L2_MBUS_FRAME_DESC_FL_BLOB (1U << 1) + +/** + * struct v4l2_mbus_frame_desc_entry - media bus frame description structure + * @flags: V4L2_MBUS_FRAME_DESC_FL_* flags + * @pixelcode: media bus pixel code, valid if FRAME_DESC_FL_BLOB is not set + * @length: number of octets per frame, valid for compressed or unspecified + * formats + */ +struct v4l2_mbus_frame_desc_entry { + u16 flags; + u32 pixelcode; + u32 length; +}; + +#define V4L2_FRAME_DESC_ENTRY_MAX 4 + +/** + * struct v4l2_mbus_frame_desc - media bus data frame description + * @entry: frame descriptors array + * @num_entries: number of entries in @entry array + */ +struct v4l2_mbus_frame_desc { + struct v4l2_mbus_frame_desc_entry entry[V4L2_FRAME_DESC_ENTRY_MAX]; + unsigned short num_entries; +}; + +/* + s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by + video input devices. + + g_std_output: get current standard for video OUTPUT devices. This is ignored + by video input devices. + + g_tvnorms_output: get v4l2_std_id with all standards supported by video + OUTPUT device. This is ignored by video input devices. + + s_crystal_freq: sets the frequency of the crystal used to generate the + clocks in Hz. An extra flags field allows device specific configuration + regarding clock frequency dividers, etc. If not used, then set flags + to 0. If the frequency is not supported, then -EINVAL is returned. + + g_input_status: get input status. Same as the status field in the v4l2_input + struct. + + s_routing: see s_routing in audio_ops, except this version is for video + devices. + + s_dv_timings(): Set custom dv timings in the sub device. This is used + when sub device is capable of setting detailed timing information + in the hardware to generate/detect the video signal. + + g_dv_timings(): Get custom dv timings in the sub device. + + enum_mbus_fmt: enumerate pixel formats, provided by a video data source + + g_mbus_fmt: get the current pixel format, provided by a video data source + + try_mbus_fmt: try to set a pixel format on a video data source + + s_mbus_fmt: set a pixel format on a video data source + + g_mbus_config: get supported mediabus configurations + + s_mbus_config: set a certain mediabus configuration. This operation is added + for compatibility with soc-camera drivers and should not be used by new + software. + + s_rx_buffer: set a host allocated memory buffer for the subdev. The subdev + can adjust @size to a lower value and must not write more data to the + buffer starting at @data than the original value of @size. + */ +struct v4l2_subdev_video_ops { + int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config); + int (*s_crystal_freq)(struct v4l2_subdev *sd, u32 freq, u32 flags); + int (*s_std_output)(struct v4l2_subdev *sd, v4l2_std_id std); + int (*g_std_output)(struct v4l2_subdev *sd, v4l2_std_id *std); + int (*querystd)(struct v4l2_subdev *sd, v4l2_std_id *std); + int (*g_tvnorms_output)(struct v4l2_subdev *sd, v4l2_std_id *std); + int (*g_input_status)(struct v4l2_subdev *sd, u32 *status); + int (*s_stream)(struct v4l2_subdev *sd, int enable); + int (*cropcap)(struct v4l2_subdev *sd, struct v4l2_cropcap *cc); + int (*g_crop)(struct v4l2_subdev *sd, struct v4l2_crop *crop); + int (*s_crop)(struct v4l2_subdev *sd, const struct v4l2_crop *crop); + int (*g_parm)(struct v4l2_subdev *sd, struct v4l2_streamparm *param); + int (*s_parm)(struct v4l2_subdev *sd, struct v4l2_streamparm *param); + int (*g_frame_interval)(struct v4l2_subdev *sd, + struct v4l2_subdev_frame_interval *interval); + int (*s_frame_interval)(struct v4l2_subdev *sd, + struct v4l2_subdev_frame_interval *interval); + int (*enum_framesizes)(struct v4l2_subdev *sd, struct v4l2_frmsizeenum *fsize); + int (*enum_frameintervals)(struct v4l2_subdev *sd, struct v4l2_frmivalenum *fival); + int (*s_dv_timings)(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings); + int (*g_dv_timings)(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings); + int (*enum_dv_timings)(struct v4l2_subdev *sd, + struct v4l2_enum_dv_timings *timings); + int (*query_dv_timings)(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings); + int (*dv_timings_cap)(struct v4l2_subdev *sd, + struct v4l2_dv_timings_cap *cap); + int (*enum_mbus_fmt)(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code); + int (*enum_mbus_fsizes)(struct v4l2_subdev *sd, + struct v4l2_frmsizeenum *fsize); + int (*g_mbus_fmt)(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt); + int (*try_mbus_fmt)(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt); + int (*s_mbus_fmt)(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt); + int (*g_mbus_config)(struct v4l2_subdev *sd, + struct v4l2_mbus_config *cfg); + int (*s_mbus_config)(struct v4l2_subdev *sd, + const struct v4l2_mbus_config *cfg); + int (*s_rx_buffer)(struct v4l2_subdev *sd, void *buf, + unsigned int *size); +}; + +/* + decode_vbi_line: video decoders that support sliced VBI need to implement + this ioctl. Field p of the v4l2_sliced_vbi_line struct is set to the + start of the VBI data that was generated by the decoder. The driver + then parses the sliced VBI data and sets the other fields in the + struct accordingly. The pointer p is updated to point to the start of + the payload which can be copied verbatim into the data field of the + v4l2_sliced_vbi_data struct. If no valid VBI data was found, then the + type field is set to 0 on return. + + s_vbi_data: used to generate VBI signals on a video signal. + v4l2_sliced_vbi_data is filled with the data packets that should be + output. Note that if you set the line field to 0, then that VBI signal + is disabled. If no valid VBI data was found, then the type field is + set to 0 on return. + + g_vbi_data: used to obtain the sliced VBI packet from a readback register. + Not all video decoders support this. If no data is available because + the readback register contains invalid or erroneous data -EIO is + returned. Note that you must fill in the 'id' member and the 'field' + member (to determine whether CC data from the first or second field + should be obtained). + + s_raw_fmt: setup the video encoder/decoder for raw VBI. + + g_sliced_fmt: retrieve the current sliced VBI settings. + + s_sliced_fmt: setup the sliced VBI settings. + */ +struct v4l2_subdev_vbi_ops { + int (*decode_vbi_line)(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi_line); + int (*s_vbi_data)(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *vbi_data); + int (*g_vbi_data)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_data *vbi_data); + int (*g_sliced_vbi_cap)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_cap *cap); + int (*s_raw_fmt)(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt); + int (*g_sliced_fmt)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt); + int (*s_sliced_fmt)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt); +}; + +/** + * struct v4l2_subdev_sensor_ops - v4l2-subdev sensor operations + * @g_skip_top_lines: number of lines at the top of the image to be skipped. + * This is needed for some sensors, which always corrupt + * several top lines of the output image, or which send their + * metadata in them. + * @g_skip_frames: number of frames to skip at stream start. This is needed for + * buggy sensors that generate faulty frames when they are + * turned on. + */ +struct v4l2_subdev_sensor_ops { + int (*g_skip_top_lines)(struct v4l2_subdev *sd, u32 *lines); + int (*g_skip_frames)(struct v4l2_subdev *sd, u32 *frames); +}; + +/* + [rt]x_g_parameters: Get the current operating parameters and state of the + the IR receiver or transmitter. + + [rt]x_s_parameters: Set the current operating parameters and state of the + the IR receiver or transmitter. It is recommended to call + [rt]x_g_parameters first to fill out the current state, and only change + the fields that need to be changed. Upon return, the actual device + operating parameters and state will be returned. Note that hardware + limitations may prevent the actual settings from matching the requested + settings - e.g. an actual carrier setting of 35,904 Hz when 36,000 Hz + was requested. An exception is when the shutdown parameter is true. + The last used operational parameters will be returned, but the actual + state of the hardware be different to minimize power consumption and + processing when shutdown is true. + + rx_read: Reads received codes or pulse width data. + The semantics are similar to a non-blocking read() call. + + tx_write: Writes codes or pulse width data for transmission. + The semantics are similar to a non-blocking write() call. + */ + +enum v4l2_subdev_ir_mode { + V4L2_SUBDEV_IR_MODE_PULSE_WIDTH, /* uses struct ir_raw_event records */ +}; + +struct v4l2_subdev_ir_parameters { + /* Either Rx or Tx */ + unsigned int bytes_per_data_element; /* of data in read or write call */ + enum v4l2_subdev_ir_mode mode; + + bool enable; + bool interrupt_enable; + bool shutdown; /* true: set hardware to low/no power, false: normal */ + + bool modulation; /* true: uses carrier, false: baseband */ + u32 max_pulse_width; /* ns, valid only for baseband signal */ + unsigned int carrier_freq; /* Hz, valid only for modulated signal*/ + unsigned int duty_cycle; /* percent, valid only for modulated signal*/ + bool invert_level; /* invert signal level */ + + /* Tx only */ + bool invert_carrier_sense; /* Send 0/space as a carrier burst */ + + /* Rx only */ + u32 noise_filter_min_width; /* ns, min time of a valid pulse */ + unsigned int carrier_range_lower; /* Hz, valid only for modulated sig */ + unsigned int carrier_range_upper; /* Hz, valid only for modulated sig */ + u32 resolution; /* ns */ +}; + +struct v4l2_subdev_ir_ops { + /* Receiver */ + int (*rx_read)(struct v4l2_subdev *sd, u8 *buf, size_t count, + ssize_t *num); + + int (*rx_g_parameters)(struct v4l2_subdev *sd, + struct v4l2_subdev_ir_parameters *params); + int (*rx_s_parameters)(struct v4l2_subdev *sd, + struct v4l2_subdev_ir_parameters *params); + + /* Transmitter */ + int (*tx_write)(struct v4l2_subdev *sd, u8 *buf, size_t count, + ssize_t *num); + + int (*tx_g_parameters)(struct v4l2_subdev *sd, + struct v4l2_subdev_ir_parameters *params); + int (*tx_s_parameters)(struct v4l2_subdev *sd, + struct v4l2_subdev_ir_parameters *params); +}; + +/** + * struct v4l2_subdev_pad_ops - v4l2-subdev pad level operations + * @get_frame_desc: get the current low level media bus frame parameters. + * @get_frame_desc: set the low level media bus frame parameters, @fd array + * may be adjusted by the subdev driver to device capabilities. + */ +struct v4l2_subdev_pad_ops { + int (*enum_mbus_code)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code); + int (*enum_frame_size)(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse); + int (*enum_frame_interval)(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_interval_enum *fie); + int (*get_fmt)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *format); + int (*set_fmt)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *format); + int (*set_crop)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop); + int (*get_crop)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop); + int (*get_selection)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_selection *sel); + int (*set_selection)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_selection *sel); + int (*get_edid)(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid); + int (*set_edid)(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid); +#ifdef CPTCFG_MEDIA_CONTROLLER + int (*link_validate)(struct v4l2_subdev *sd, struct media_link *link, + struct v4l2_subdev_format *source_fmt, + struct v4l2_subdev_format *sink_fmt); +#endif /* CPTCFG_MEDIA_CONTROLLER */ + int (*get_frame_desc)(struct v4l2_subdev *sd, unsigned int pad, + struct v4l2_mbus_frame_desc *fd); + int (*set_frame_desc)(struct v4l2_subdev *sd, unsigned int pad, + struct v4l2_mbus_frame_desc *fd); +}; + +struct v4l2_subdev_ops { + const struct v4l2_subdev_core_ops *core; + const struct v4l2_subdev_tuner_ops *tuner; + const struct v4l2_subdev_audio_ops *audio; + const struct v4l2_subdev_video_ops *video; + const struct v4l2_subdev_vbi_ops *vbi; + const struct v4l2_subdev_ir_ops *ir; + const struct v4l2_subdev_sensor_ops *sensor; + const struct v4l2_subdev_pad_ops *pad; +}; + +/* + * Internal ops. Never call this from drivers, only the v4l2 framework can call + * these ops. + * + * registered: called when this subdev is registered. When called the v4l2_dev + * field is set to the correct v4l2_device. + * + * unregistered: called when this subdev is unregistered. When called the + * v4l2_dev field is still set to the correct v4l2_device. + * + * open: called when the subdev device node is opened by an application. + * + * close: called when the subdev device node is closed. + */ +struct v4l2_subdev_internal_ops { + int (*registered)(struct v4l2_subdev *sd); + void (*unregistered)(struct v4l2_subdev *sd); + int (*open)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh); + int (*close)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh); +}; + +#define V4L2_SUBDEV_NAME_SIZE 32 + +/* Set this flag if this subdev is a i2c device. */ +#define V4L2_SUBDEV_FL_IS_I2C (1U << 0) +/* Set this flag if this subdev is a spi device. */ +#define V4L2_SUBDEV_FL_IS_SPI (1U << 1) +/* Set this flag if this subdev needs a device node. */ +#define V4L2_SUBDEV_FL_HAS_DEVNODE (1U << 2) +/* Set this flag if this subdev generates events. */ +#define V4L2_SUBDEV_FL_HAS_EVENTS (1U << 3) + +/* Each instance of a subdev driver should create this struct, either + stand-alone or embedded in a larger struct. + */ +struct v4l2_subdev { +#if defined(CPTCFG_MEDIA_CONTROLLER) + struct media_entity entity; +#endif + struct list_head list; + struct module *owner; + u32 flags; + struct v4l2_device *v4l2_dev; + const struct v4l2_subdev_ops *ops; + /* Never call these internal ops from within a driver! */ + const struct v4l2_subdev_internal_ops *internal_ops; + /* The control handler of this subdev. May be NULL. */ + struct v4l2_ctrl_handler *ctrl_handler; + /* name must be unique */ + char name[V4L2_SUBDEV_NAME_SIZE]; + /* can be used to group similar subdevs, value is driver-specific */ + u32 grp_id; + /* pointer to private data */ + void *dev_priv; + void *host_priv; + /* subdev device node */ + struct video_device *devnode; +}; + +#define media_entity_to_v4l2_subdev(ent) \ + container_of(ent, struct v4l2_subdev, entity) +#define vdev_to_v4l2_subdev(vdev) \ + ((struct v4l2_subdev *)video_get_drvdata(vdev)) + +/* + * Used for storing subdev information per file handle + */ +struct v4l2_subdev_fh { + struct v4l2_fh vfh; +#if defined(CPTCFG_VIDEO_V4L2_SUBDEV_API) + struct { + struct v4l2_mbus_framefmt try_fmt; + struct v4l2_rect try_crop; + struct v4l2_rect try_compose; + } *pad; +#endif +}; + +#define to_v4l2_subdev_fh(fh) \ + container_of(fh, struct v4l2_subdev_fh, vfh) + +#if defined(CPTCFG_VIDEO_V4L2_SUBDEV_API) +#define __V4L2_SUBDEV_MK_GET_TRY(rtype, fun_name, field_name) \ + static inline struct rtype * \ + v4l2_subdev_get_try_##fun_name(struct v4l2_subdev_fh *fh, \ + unsigned int pad) \ + { \ + BUG_ON(unlikely(pad >= vdev_to_v4l2_subdev( \ + fh->vfh.vdev)->entity.num_pads)); \ + return &fh->pad[pad].field_name; \ + } + +__V4L2_SUBDEV_MK_GET_TRY(v4l2_mbus_framefmt, format, try_fmt) +__V4L2_SUBDEV_MK_GET_TRY(v4l2_rect, crop, try_compose) +__V4L2_SUBDEV_MK_GET_TRY(v4l2_rect, compose, try_compose) +#endif + +extern const struct v4l2_file_operations v4l2_subdev_fops; + +static inline void v4l2_set_subdevdata(struct v4l2_subdev *sd, void *p) +{ + sd->dev_priv = p; +} + +static inline void *v4l2_get_subdevdata(const struct v4l2_subdev *sd) +{ + return sd->dev_priv; +} + +static inline void v4l2_set_subdev_hostdata(struct v4l2_subdev *sd, void *p) +{ + sd->host_priv = p; +} + +static inline void *v4l2_get_subdev_hostdata(const struct v4l2_subdev *sd) +{ + return sd->host_priv; +} + +#ifdef CPTCFG_MEDIA_CONTROLLER +int v4l2_subdev_link_validate_default(struct v4l2_subdev *sd, + struct media_link *link, + struct v4l2_subdev_format *source_fmt, + struct v4l2_subdev_format *sink_fmt); +int v4l2_subdev_link_validate(struct media_link *link); +#endif /* CPTCFG_MEDIA_CONTROLLER */ +void v4l2_subdev_init(struct v4l2_subdev *sd, + const struct v4l2_subdev_ops *ops); + +/* Call an ops of a v4l2_subdev, doing the right checks against + NULL pointers. + + Example: err = v4l2_subdev_call(sd, core, g_chip_ident, &chip); + */ +#define v4l2_subdev_call(sd, o, f, args...) \ + (!(sd) ? -ENODEV : (((sd)->ops->o && (sd)->ops->o->f) ? \ + (sd)->ops->o->f((sd) , ##args) : -ENOIOCTLCMD)) + +/* Send a notification to v4l2_device. */ +#define v4l2_subdev_notify(sd, notification, arg) \ + ((!(sd) || !(sd)->v4l2_dev || !(sd)->v4l2_dev->notify) ? -ENODEV : \ + (sd)->v4l2_dev->notify((sd), (notification), (arg))) + +#define v4l2_subdev_has_op(sd, o, f) \ + ((sd)->ops->o && (sd)->ops->o->f) + +#endif |