diff options
Diffstat (limited to 'drivers/regulator/ab3100.c')
| -rw-r--r-- | drivers/regulator/ab3100.c | 747 |
1 files changed, 747 insertions, 0 deletions
diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c new file mode 100644 index 0000000..3be9e46 --- /dev/null +++ b/drivers/regulator/ab3100.c @@ -0,0 +1,747 @@ +/* + * drivers/regulator/ab3100.c + * + * Copyright (C) 2008-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Low-level control of the AB3100 IC Low Dropout (LDO) + * regulators, external regulator and buck converter + * Author: Mattias Wallin <mattias.wallin@stericsson.com> + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/mfd/ab3100.h> +#include <linux/mfd/abx500.h> +#include <linux/of.h> +#include <linux/regulator/of_regulator.h> + +/* LDO registers and some handy masking definitions for AB3100 */ +#define AB3100_LDO_A 0x40 +#define AB3100_LDO_C 0x41 +#define AB3100_LDO_D 0x42 +#define AB3100_LDO_E 0x43 +#define AB3100_LDO_E_SLEEP 0x44 +#define AB3100_LDO_F 0x45 +#define AB3100_LDO_G 0x46 +#define AB3100_LDO_H 0x47 +#define AB3100_LDO_H_SLEEP_MODE 0 +#define AB3100_LDO_H_SLEEP_EN 2 +#define AB3100_LDO_ON 4 +#define AB3100_LDO_H_VSEL_AC 5 +#define AB3100_LDO_K 0x48 +#define AB3100_LDO_EXT 0x49 +#define AB3100_BUCK 0x4A +#define AB3100_BUCK_SLEEP 0x4B +#define AB3100_REG_ON_MASK 0x10 + +/** + * struct ab3100_regulator + * A struct passed around the individual regulator functions + * @platform_device: platform device holding this regulator + * @dev: handle to the device + * @plfdata: AB3100 platform data passed in at probe time + * @regreg: regulator register number in the AB3100 + */ +struct ab3100_regulator { + struct regulator_dev *rdev; + struct device *dev; + struct ab3100_platform_data *plfdata; + u8 regreg; +}; + +/* The order in which registers are initialized */ +static const u8 ab3100_reg_init_order[AB3100_NUM_REGULATORS+2] = { + AB3100_LDO_A, + AB3100_LDO_C, + AB3100_LDO_E, + AB3100_LDO_E_SLEEP, + AB3100_LDO_F, + AB3100_LDO_G, + AB3100_LDO_H, + AB3100_LDO_K, + AB3100_LDO_EXT, + AB3100_BUCK, + AB3100_BUCK_SLEEP, + AB3100_LDO_D, +}; + +/* Preset (hardware defined) voltages for these regulators */ +#define LDO_A_VOLTAGE 2750000 +#define LDO_C_VOLTAGE 2650000 +#define LDO_D_VOLTAGE 2650000 + +static const unsigned int ldo_e_buck_typ_voltages[] = { + 1800000, + 1400000, + 1300000, + 1200000, + 1100000, + 1050000, + 900000, +}; + +static const unsigned int ldo_f_typ_voltages[] = { + 1800000, + 1400000, + 1300000, + 1200000, + 1100000, + 1050000, + 2500000, + 2650000, +}; + +static const unsigned int ldo_g_typ_voltages[] = { + 2850000, + 2750000, + 1800000, + 1500000, +}; + +static const unsigned int ldo_h_typ_voltages[] = { + 2750000, + 1800000, + 1500000, + 1200000, +}; + +static const unsigned int ldo_k_typ_voltages[] = { + 2750000, + 1800000, +}; + + +/* The regulator devices */ +static struct ab3100_regulator +ab3100_regulators[AB3100_NUM_REGULATORS] = { + { + .regreg = AB3100_LDO_A, + }, + { + .regreg = AB3100_LDO_C, + }, + { + .regreg = AB3100_LDO_D, + }, + { + .regreg = AB3100_LDO_E, + }, + { + .regreg = AB3100_LDO_F, + }, + { + .regreg = AB3100_LDO_G, + }, + { + .regreg = AB3100_LDO_H, + }, + { + .regreg = AB3100_LDO_K, + }, + { + .regreg = AB3100_LDO_EXT, + /* No voltages for the external regulator */ + }, + { + .regreg = AB3100_BUCK, + }, +}; + +/* + * General functions for enable, disable and is_enabled used for + * LDO: A,C,E,F,G,H,K,EXT and BUCK + */ +static int ab3100_enable_regulator(struct regulator_dev *reg) +{ + struct ab3100_regulator *abreg = rdev_get_drvdata(reg); + int err; + u8 regval; + + err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg, + ®val); + if (err) { + dev_warn(®->dev, "failed to get regid %d value\n", + abreg->regreg); + return err; + } + + /* The regulator is already on, no reason to go further */ + if (regval & AB3100_REG_ON_MASK) + return 0; + + regval |= AB3100_REG_ON_MASK; + + err = abx500_set_register_interruptible(abreg->dev, 0, abreg->regreg, + regval); + if (err) { + dev_warn(®->dev, "failed to set regid %d value\n", + abreg->regreg); + return err; + } + + return 0; +} + +static int ab3100_disable_regulator(struct regulator_dev *reg) +{ + struct ab3100_regulator *abreg = rdev_get_drvdata(reg); + int err; + u8 regval; + + /* + * LDO D is a special regulator. When it is disabled, the entire + * system is shut down. So this is handled specially. + */ + pr_info("Called ab3100_disable_regulator\n"); + if (abreg->regreg == AB3100_LDO_D) { + dev_info(®->dev, "disabling LDO D - shut down system\n"); + /* Setting LDO D to 0x00 cuts the power to the SoC */ + return abx500_set_register_interruptible(abreg->dev, 0, + AB3100_LDO_D, 0x00U); + } + + /* + * All other regulators are handled here + */ + err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg, + ®val); + if (err) { + dev_err(®->dev, "unable to get register 0x%x\n", + abreg->regreg); + return err; + } + regval &= ~AB3100_REG_ON_MASK; + return abx500_set_register_interruptible(abreg->dev, 0, abreg->regreg, + regval); +} + +static int ab3100_is_enabled_regulator(struct regulator_dev *reg) +{ + struct ab3100_regulator *abreg = rdev_get_drvdata(reg); + u8 regval; + int err; + + err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg, + ®val); + if (err) { + dev_err(®->dev, "unable to get register 0x%x\n", + abreg->regreg); + return err; + } + + return regval & AB3100_REG_ON_MASK; +} + +static int ab3100_get_voltage_regulator(struct regulator_dev *reg) +{ + struct ab3100_regulator *abreg = rdev_get_drvdata(reg); + u8 regval; + int err; + + /* + * For variable types, read out setting and index into + * supplied voltage list. + */ + err = abx500_get_register_interruptible(abreg->dev, 0, + abreg->regreg, ®val); + if (err) { + dev_warn(®->dev, + "failed to get regulator value in register %02x\n", + abreg->regreg); + return err; + } + + /* The 3 highest bits index voltages */ + regval &= 0xE0; + regval >>= 5; + + if (regval >= reg->desc->n_voltages) { + dev_err(®->dev, + "regulator register %02x contains an illegal voltage setting\n", + abreg->regreg); + return -EINVAL; + } + + return reg->desc->volt_table[regval]; +} + +static int ab3100_set_voltage_regulator_sel(struct regulator_dev *reg, + unsigned selector) +{ + struct ab3100_regulator *abreg = rdev_get_drvdata(reg); + u8 regval; + int err; + + err = abx500_get_register_interruptible(abreg->dev, 0, + abreg->regreg, ®val); + if (err) { + dev_warn(®->dev, + "failed to get regulator register %02x\n", + abreg->regreg); + return err; + } + + /* The highest three bits control the variable regulators */ + regval &= ~0xE0; + regval |= (selector << 5); + + err = abx500_set_register_interruptible(abreg->dev, 0, + abreg->regreg, regval); + if (err) + dev_warn(®->dev, "failed to set regulator register %02x\n", + abreg->regreg); + + return err; +} + +static int ab3100_set_suspend_voltage_regulator(struct regulator_dev *reg, + int uV) +{ + struct ab3100_regulator *abreg = rdev_get_drvdata(reg); + u8 regval; + int err; + int bestindex; + u8 targetreg; + + if (abreg->regreg == AB3100_LDO_E) + targetreg = AB3100_LDO_E_SLEEP; + else if (abreg->regreg == AB3100_BUCK) + targetreg = AB3100_BUCK_SLEEP; + else + return -EINVAL; + + /* LDO E and BUCK have special suspend voltages you can set */ + bestindex = regulator_map_voltage_iterate(reg, uV, uV); + + err = abx500_get_register_interruptible(abreg->dev, 0, + targetreg, ®val); + if (err) { + dev_warn(®->dev, + "failed to get regulator register %02x\n", + targetreg); + return err; + } + + /* The highest three bits control the variable regulators */ + regval &= ~0xE0; + regval |= (bestindex << 5); + + err = abx500_set_register_interruptible(abreg->dev, 0, + targetreg, regval); + if (err) + dev_warn(®->dev, "failed to set regulator register %02x\n", + abreg->regreg); + + return err; +} + +/* + * The external regulator can just define a fixed voltage. + */ +static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg) +{ + struct ab3100_regulator *abreg = rdev_get_drvdata(reg); + + if (abreg->plfdata) + return abreg->plfdata->external_voltage; + else + /* TODO: encode external voltage into device tree */ + return 0; +} + +static struct regulator_ops regulator_ops_fixed = { + .list_voltage = regulator_list_voltage_linear, + .enable = ab3100_enable_regulator, + .disable = ab3100_disable_regulator, + .is_enabled = ab3100_is_enabled_regulator, +}; + +static struct regulator_ops regulator_ops_variable = { + .enable = ab3100_enable_regulator, + .disable = ab3100_disable_regulator, + .is_enabled = ab3100_is_enabled_regulator, + .get_voltage = ab3100_get_voltage_regulator, + .set_voltage_sel = ab3100_set_voltage_regulator_sel, + .list_voltage = regulator_list_voltage_table, +}; + +static struct regulator_ops regulator_ops_variable_sleepable = { + .enable = ab3100_enable_regulator, + .disable = ab3100_disable_regulator, + .is_enabled = ab3100_is_enabled_regulator, + .get_voltage = ab3100_get_voltage_regulator, + .set_voltage_sel = ab3100_set_voltage_regulator_sel, + .set_suspend_voltage = ab3100_set_suspend_voltage_regulator, + .list_voltage = regulator_list_voltage_table, +}; + +/* + * LDO EXT is an external regulator so it is really + * not possible to set any voltage locally here, AB3100 + * is an on/off switch plain an simple. The external + * voltage is defined in the board set-up if any. + */ +static struct regulator_ops regulator_ops_external = { + .enable = ab3100_enable_regulator, + .disable = ab3100_disable_regulator, + .is_enabled = ab3100_is_enabled_regulator, + .get_voltage = ab3100_get_voltage_regulator_external, +}; + +static struct regulator_desc +ab3100_regulator_desc[AB3100_NUM_REGULATORS] = { + { + .name = "LDO_A", + .id = AB3100_LDO_A, + .ops = ®ulator_ops_fixed, + .n_voltages = 1, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .min_uV = LDO_A_VOLTAGE, + .enable_time = 200, + }, + { + .name = "LDO_C", + .id = AB3100_LDO_C, + .ops = ®ulator_ops_fixed, + .n_voltages = 1, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .min_uV = LDO_C_VOLTAGE, + .enable_time = 200, + }, + { + .name = "LDO_D", + .id = AB3100_LDO_D, + .ops = ®ulator_ops_fixed, + .n_voltages = 1, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .min_uV = LDO_D_VOLTAGE, + .enable_time = 200, + }, + { + .name = "LDO_E", + .id = AB3100_LDO_E, + .ops = ®ulator_ops_variable_sleepable, + .n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages), + .volt_table = ldo_e_buck_typ_voltages, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .enable_time = 200, + }, + { + .name = "LDO_F", + .id = AB3100_LDO_F, + .ops = ®ulator_ops_variable, + .n_voltages = ARRAY_SIZE(ldo_f_typ_voltages), + .volt_table = ldo_f_typ_voltages, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .enable_time = 600, + }, + { + .name = "LDO_G", + .id = AB3100_LDO_G, + .ops = ®ulator_ops_variable, + .n_voltages = ARRAY_SIZE(ldo_g_typ_voltages), + .volt_table = ldo_g_typ_voltages, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .enable_time = 400, + }, + { + .name = "LDO_H", + .id = AB3100_LDO_H, + .ops = ®ulator_ops_variable, + .n_voltages = ARRAY_SIZE(ldo_h_typ_voltages), + .volt_table = ldo_h_typ_voltages, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .enable_time = 200, + }, + { + .name = "LDO_K", + .id = AB3100_LDO_K, + .ops = ®ulator_ops_variable, + .n_voltages = ARRAY_SIZE(ldo_k_typ_voltages), + .volt_table = ldo_k_typ_voltages, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .enable_time = 200, + }, + { + .name = "LDO_EXT", + .id = AB3100_LDO_EXT, + .ops = ®ulator_ops_external, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "BUCK", + .id = AB3100_BUCK, + .ops = ®ulator_ops_variable_sleepable, + .n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages), + .volt_table = ldo_e_buck_typ_voltages, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .enable_time = 1000, + }, +}; + +static int ab3100_regulator_register(struct platform_device *pdev, + struct ab3100_platform_data *plfdata, + struct regulator_init_data *init_data, + struct device_node *np, + int id) +{ + struct regulator_desc *desc; + struct ab3100_regulator *reg; + struct regulator_dev *rdev; + struct regulator_config config = { }; + int err, i; + + for (i = 0; i < AB3100_NUM_REGULATORS; i++) { + desc = &ab3100_regulator_desc[i]; + if (desc->id == id) + break; + } + if (desc->id != id) + return -ENODEV; + + /* Same index used for this array */ + reg = &ab3100_regulators[i]; + + /* + * Initialize per-regulator struct. + * Inherit platform data, this comes down from the + * i2c boarddata, from the machine. So if you want to + * see what it looks like for a certain machine, go + * into the machine I2C setup. + */ + reg->dev = &pdev->dev; + if (plfdata) { + reg->plfdata = plfdata; + config.init_data = &plfdata->reg_constraints[i]; + } else if (np) { + config.of_node = np; + config.init_data = init_data; + } + config.dev = &pdev->dev; + config.driver_data = reg; + + rdev = regulator_register(desc, &config); + if (IS_ERR(rdev)) { + err = PTR_ERR(rdev); + dev_err(&pdev->dev, + "%s: failed to register regulator %s err %d\n", + __func__, desc->name, + err); + return err; + } + + /* Then set a pointer back to the registered regulator */ + reg->rdev = rdev; + return 0; +} + +static struct of_regulator_match ab3100_regulator_matches[] = { + { .name = "ab3100_ldo_a", .driver_data = (void *) AB3100_LDO_A, }, + { .name = "ab3100_ldo_c", .driver_data = (void *) AB3100_LDO_C, }, + { .name = "ab3100_ldo_d", .driver_data = (void *) AB3100_LDO_D, }, + { .name = "ab3100_ldo_e", .driver_data = (void *) AB3100_LDO_E, }, + { .name = "ab3100_ldo_f", .driver_data = (void *) AB3100_LDO_F }, + { .name = "ab3100_ldo_g", .driver_data = (void *) AB3100_LDO_G }, + { .name = "ab3100_ldo_h", .driver_data = (void *) AB3100_LDO_H }, + { .name = "ab3100_ldo_k", .driver_data = (void *) AB3100_LDO_K }, + { .name = "ab3100_ext", .driver_data = (void *) AB3100_LDO_EXT }, + { .name = "ab3100_buck", .driver_data = (void *) AB3100_BUCK }, +}; + +/* + * Initial settings of ab3100 registers. + * Common for below LDO regulator settings are that + * bit 7-5 controls voltage. Bit 4 turns regulator ON(1) or OFF(0). + * Bit 3-2 controls sleep enable and bit 1-0 controls sleep mode. + */ +/* LDO_A 0x16: 2.75V, ON, SLEEP_A, SLEEP OFF GND */ +#define LDO_A_SETTING 0x16 +/* LDO_C 0x10: 2.65V, ON, SLEEP_A or B, SLEEP full power */ +#define LDO_C_SETTING 0x10 +/* LDO_D 0x10: 2.65V, ON, sleep mode not used */ +#define LDO_D_SETTING 0x10 +/* LDO_E 0x10: 1.8V, ON, SLEEP_A or B, SLEEP full power */ +#define LDO_E_SETTING 0x10 +/* LDO_E SLEEP 0x00: 1.8V, not used, SLEEP_A or B, not used */ +#define LDO_E_SLEEP_SETTING 0x00 +/* LDO_F 0xD0: 2.5V, ON, SLEEP_A or B, SLEEP full power */ +#define LDO_F_SETTING 0xD0 +/* LDO_G 0x00: 2.85V, OFF, SLEEP_A or B, SLEEP full power */ +#define LDO_G_SETTING 0x00 +/* LDO_H 0x18: 2.75V, ON, SLEEP_B, SLEEP full power */ +#define LDO_H_SETTING 0x18 +/* LDO_K 0x00: 2.75V, OFF, SLEEP_A or B, SLEEP full power */ +#define LDO_K_SETTING 0x00 +/* LDO_EXT 0x00: Voltage not set, OFF, not used, not used */ +#define LDO_EXT_SETTING 0x00 +/* BUCK 0x7D: 1.2V, ON, SLEEP_A and B, SLEEP low power */ +#define BUCK_SETTING 0x7D +/* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */ +#define BUCK_SLEEP_SETTING 0xAC + +static const u8 ab3100_reg_initvals[] = { + LDO_A_SETTING, + LDO_C_SETTING, + LDO_E_SETTING, + LDO_E_SLEEP_SETTING, + LDO_F_SETTING, + LDO_G_SETTING, + LDO_H_SETTING, + LDO_K_SETTING, + LDO_EXT_SETTING, + BUCK_SETTING, + BUCK_SLEEP_SETTING, + LDO_D_SETTING, +}; + +static int ab3100_regulators_remove(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < AB3100_NUM_REGULATORS; i++) { + struct ab3100_regulator *reg = &ab3100_regulators[i]; + + regulator_unregister(reg->rdev); + reg->rdev = NULL; + } + return 0; +} + +static int +ab3100_regulator_of_probe(struct platform_device *pdev, struct device_node *np) +{ + int err, i; + + /* + * Set up the regulator registers, as was previously done with + * platform data. + */ + /* Set up regulators */ + for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) { + err = abx500_set_register_interruptible(&pdev->dev, 0, + ab3100_reg_init_order[i], + ab3100_reg_initvals[i]); + if (err) { + dev_err(&pdev->dev, "regulator initialization failed with error %d\n", + err); + return err; + } + } + + for (i = 0; i < ARRAY_SIZE(ab3100_regulator_matches); i++) { + err = ab3100_regulator_register( + pdev, NULL, ab3100_regulator_matches[i].init_data, + ab3100_regulator_matches[i].of_node, + (int) ab3100_regulator_matches[i].driver_data); + if (err) { + ab3100_regulators_remove(pdev); + return err; + } + } + + return 0; +} + + +static int ab3100_regulators_probe(struct platform_device *pdev) +{ + struct ab3100_platform_data *plfdata = pdev->dev.platform_data; + struct device_node *np = pdev->dev.of_node; + int err = 0; + u8 data; + int i; + + /* Check chip state */ + err = abx500_get_register_interruptible(&pdev->dev, 0, + AB3100_LDO_D, &data); + if (err) { + dev_err(&pdev->dev, "could not read initial status of LDO_D\n"); + return err; + } + if (data & 0x10) + dev_notice(&pdev->dev, + "chip is already in active mode (Warm start)\n"); + else + dev_notice(&pdev->dev, + "chip is in inactive mode (Cold start)\n"); + + if (np) { + err = of_regulator_match(&pdev->dev, np, + ab3100_regulator_matches, + ARRAY_SIZE(ab3100_regulator_matches)); + if (err < 0) { + dev_err(&pdev->dev, + "Error parsing regulator init data: %d\n", err); + return err; + } + return ab3100_regulator_of_probe(pdev, np); + } + + /* Set up regulators */ + for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) { + err = abx500_set_register_interruptible(&pdev->dev, 0, + ab3100_reg_init_order[i], + plfdata->reg_initvals[i]); + if (err) { + dev_err(&pdev->dev, "regulator initialization failed with error %d\n", + err); + return err; + } + } + + /* Register the regulators */ + for (i = 0; i < AB3100_NUM_REGULATORS; i++) { + struct regulator_desc *desc = &ab3100_regulator_desc[i]; + + err = ab3100_regulator_register(pdev, plfdata, NULL, NULL, + desc->id); + if (err) { + ab3100_regulators_remove(pdev); + return err; + } + } + + return 0; +} + +static struct platform_driver ab3100_regulators_driver = { + .driver = { + .name = "ab3100-regulators", + .owner = THIS_MODULE, + }, + .probe = ab3100_regulators_probe, + .remove = ab3100_regulators_remove, +}; + +static __init int ab3100_regulators_init(void) +{ + return platform_driver_register(&ab3100_regulators_driver); +} + +static __exit void ab3100_regulators_exit(void) +{ + platform_driver_unregister(&ab3100_regulators_driver); +} + +subsys_initcall(ab3100_regulators_init); +module_exit(ab3100_regulators_exit); + +MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>"); +MODULE_DESCRIPTION("AB3100 Regulator driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ab3100-regulators"); |