diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/recv.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/recv.c | 1401 |
1 files changed, 1401 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c new file mode 100644 index 0000000..6a09a04 --- /dev/null +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -0,0 +1,1401 @@ +/* + * Copyright (c) 2008-2011 Atheros Communications Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <linux/dma-mapping.h> +#include <linux/relay.h> +#include "ath9k.h" +#include "ar9003_mac.h" + +#define SKB_CB_ATHBUF(__skb) (*((struct ath_buf **)__skb->cb)) + +static inline bool ath9k_check_auto_sleep(struct ath_softc *sc) +{ + return sc->ps_enabled && + (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP); +} + +/* + * Setup and link descriptors. + * + * 11N: we can no longer afford to self link the last descriptor. + * MAC acknowledges BA status as long as it copies frames to host + * buffer (or rx fifo). This can incorrectly acknowledge packets + * to a sender if last desc is self-linked. + */ +static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf) +{ + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); + struct ath_desc *ds; + struct sk_buff *skb; + + ds = bf->bf_desc; + ds->ds_link = 0; /* link to null */ + ds->ds_data = bf->bf_buf_addr; + + /* virtual addr of the beginning of the buffer. */ + skb = bf->bf_mpdu; + BUG_ON(skb == NULL); + ds->ds_vdata = skb->data; + + /* + * setup rx descriptors. The rx_bufsize here tells the hardware + * how much data it can DMA to us and that we are prepared + * to process + */ + ath9k_hw_setuprxdesc(ah, ds, + common->rx_bufsize, + 0); + + if (sc->rx.rxlink == NULL) + ath9k_hw_putrxbuf(ah, bf->bf_daddr); + else + *sc->rx.rxlink = bf->bf_daddr; + + sc->rx.rxlink = &ds->ds_link; +} + +static void ath_rx_buf_relink(struct ath_softc *sc, struct ath_buf *bf) +{ + if (sc->rx.buf_hold) + ath_rx_buf_link(sc, sc->rx.buf_hold); + + sc->rx.buf_hold = bf; +} + +static void ath_setdefantenna(struct ath_softc *sc, u32 antenna) +{ + /* XXX block beacon interrupts */ + ath9k_hw_setantenna(sc->sc_ah, antenna); + sc->rx.defant = antenna; + sc->rx.rxotherant = 0; +} + +static void ath_opmode_init(struct ath_softc *sc) +{ + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); + + u32 rfilt, mfilt[2]; + + /* configure rx filter */ + rfilt = ath_calcrxfilter(sc); + ath9k_hw_setrxfilter(ah, rfilt); + + /* configure bssid mask */ + ath_hw_setbssidmask(common); + + /* configure operational mode */ + ath9k_hw_setopmode(ah); + + /* calculate and install multicast filter */ + mfilt[0] = mfilt[1] = ~0; + ath9k_hw_setmcastfilter(ah, mfilt[0], mfilt[1]); +} + +static bool ath_rx_edma_buf_link(struct ath_softc *sc, + enum ath9k_rx_qtype qtype) +{ + struct ath_hw *ah = sc->sc_ah; + struct ath_rx_edma *rx_edma; + struct sk_buff *skb; + struct ath_buf *bf; + + rx_edma = &sc->rx.rx_edma[qtype]; + if (skb_queue_len(&rx_edma->rx_fifo) >= rx_edma->rx_fifo_hwsize) + return false; + + bf = list_first_entry(&sc->rx.rxbuf, struct ath_buf, list); + list_del_init(&bf->list); + + skb = bf->bf_mpdu; + + memset(skb->data, 0, ah->caps.rx_status_len); + dma_sync_single_for_device(sc->dev, bf->bf_buf_addr, + ah->caps.rx_status_len, DMA_TO_DEVICE); + + SKB_CB_ATHBUF(skb) = bf; + ath9k_hw_addrxbuf_edma(ah, bf->bf_buf_addr, qtype); + __skb_queue_tail(&rx_edma->rx_fifo, skb); + + return true; +} + +static void ath_rx_addbuffer_edma(struct ath_softc *sc, + enum ath9k_rx_qtype qtype) +{ + struct ath_common *common = ath9k_hw_common(sc->sc_ah); + struct ath_buf *bf, *tbf; + + if (list_empty(&sc->rx.rxbuf)) { + ath_dbg(common, QUEUE, "No free rx buf available\n"); + return; + } + + list_for_each_entry_safe(bf, tbf, &sc->rx.rxbuf, list) + if (!ath_rx_edma_buf_link(sc, qtype)) + break; + +} + +static void ath_rx_remove_buffer(struct ath_softc *sc, + enum ath9k_rx_qtype qtype) +{ + struct ath_buf *bf; + struct ath_rx_edma *rx_edma; + struct sk_buff *skb; + + rx_edma = &sc->rx.rx_edma[qtype]; + + while ((skb = __skb_dequeue(&rx_edma->rx_fifo)) != NULL) { + bf = SKB_CB_ATHBUF(skb); + BUG_ON(!bf); + list_add_tail(&bf->list, &sc->rx.rxbuf); + } +} + +static void ath_rx_edma_cleanup(struct ath_softc *sc) +{ + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); + struct ath_buf *bf; + + ath_rx_remove_buffer(sc, ATH9K_RX_QUEUE_LP); + ath_rx_remove_buffer(sc, ATH9K_RX_QUEUE_HP); + + list_for_each_entry(bf, &sc->rx.rxbuf, list) { + if (bf->bf_mpdu) { + dma_unmap_single(sc->dev, bf->bf_buf_addr, + common->rx_bufsize, + DMA_BIDIRECTIONAL); + dev_kfree_skb_any(bf->bf_mpdu); + bf->bf_buf_addr = 0; + bf->bf_mpdu = NULL; + } + } +} + +static void ath_rx_edma_init_queue(struct ath_rx_edma *rx_edma, int size) +{ + skb_queue_head_init(&rx_edma->rx_fifo); + rx_edma->rx_fifo_hwsize = size; +} + +static int ath_rx_edma_init(struct ath_softc *sc, int nbufs) +{ + struct ath_common *common = ath9k_hw_common(sc->sc_ah); + struct ath_hw *ah = sc->sc_ah; + struct sk_buff *skb; + struct ath_buf *bf; + int error = 0, i; + u32 size; + + ath9k_hw_set_rx_bufsize(ah, common->rx_bufsize - + ah->caps.rx_status_len); + + ath_rx_edma_init_queue(&sc->rx.rx_edma[ATH9K_RX_QUEUE_LP], + ah->caps.rx_lp_qdepth); + ath_rx_edma_init_queue(&sc->rx.rx_edma[ATH9K_RX_QUEUE_HP], + ah->caps.rx_hp_qdepth); + + size = sizeof(struct ath_buf) * nbufs; + bf = devm_kzalloc(sc->dev, size, GFP_KERNEL); + if (!bf) + return -ENOMEM; + + INIT_LIST_HEAD(&sc->rx.rxbuf); + + for (i = 0; i < nbufs; i++, bf++) { + skb = ath_rxbuf_alloc(common, common->rx_bufsize, GFP_KERNEL); + if (!skb) { + error = -ENOMEM; + goto rx_init_fail; + } + + memset(skb->data, 0, common->rx_bufsize); + bf->bf_mpdu = skb; + + bf->bf_buf_addr = dma_map_single(sc->dev, skb->data, + common->rx_bufsize, + DMA_BIDIRECTIONAL); + if (unlikely(dma_mapping_error(sc->dev, + bf->bf_buf_addr))) { + dev_kfree_skb_any(skb); + bf->bf_mpdu = NULL; + bf->bf_buf_addr = 0; + ath_err(common, + "dma_mapping_error() on RX init\n"); + error = -ENOMEM; + goto rx_init_fail; + } + + list_add_tail(&bf->list, &sc->rx.rxbuf); + } + + return 0; + +rx_init_fail: + ath_rx_edma_cleanup(sc); + return error; +} + +static void ath_edma_start_recv(struct ath_softc *sc) +{ + ath9k_hw_rxena(sc->sc_ah); + ath_rx_addbuffer_edma(sc, ATH9K_RX_QUEUE_HP); + ath_rx_addbuffer_edma(sc, ATH9K_RX_QUEUE_LP); + ath_opmode_init(sc); + ath9k_hw_startpcureceive(sc->sc_ah, !!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)); +} + +static void ath_edma_stop_recv(struct ath_softc *sc) +{ + ath_rx_remove_buffer(sc, ATH9K_RX_QUEUE_HP); + ath_rx_remove_buffer(sc, ATH9K_RX_QUEUE_LP); +} + +int ath_rx_init(struct ath_softc *sc, int nbufs) +{ + struct ath_common *common = ath9k_hw_common(sc->sc_ah); + struct sk_buff *skb; + struct ath_buf *bf; + int error = 0; + + spin_lock_init(&sc->sc_pcu_lock); + + common->rx_bufsize = IEEE80211_MAX_MPDU_LEN / 2 + + sc->sc_ah->caps.rx_status_len; + + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) + return ath_rx_edma_init(sc, nbufs); + + ath_dbg(common, CONFIG, "cachelsz %u rxbufsize %u\n", + common->cachelsz, common->rx_bufsize); + + /* Initialize rx descriptors */ + + error = ath_descdma_setup(sc, &sc->rx.rxdma, &sc->rx.rxbuf, + "rx", nbufs, 1, 0); + if (error != 0) { + ath_err(common, + "failed to allocate rx descriptors: %d\n", + error); + goto err; + } + + list_for_each_entry(bf, &sc->rx.rxbuf, list) { + skb = ath_rxbuf_alloc(common, common->rx_bufsize, + GFP_KERNEL); + if (skb == NULL) { + error = -ENOMEM; + goto err; + } + + bf->bf_mpdu = skb; + bf->bf_buf_addr = dma_map_single(sc->dev, skb->data, + common->rx_bufsize, + DMA_FROM_DEVICE); + if (unlikely(dma_mapping_error(sc->dev, + bf->bf_buf_addr))) { + dev_kfree_skb_any(skb); + bf->bf_mpdu = NULL; + bf->bf_buf_addr = 0; + ath_err(common, + "dma_mapping_error() on RX init\n"); + error = -ENOMEM; + goto err; + } + } + sc->rx.rxlink = NULL; +err: + if (error) + ath_rx_cleanup(sc); + + return error; +} + +void ath_rx_cleanup(struct ath_softc *sc) +{ + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); + struct sk_buff *skb; + struct ath_buf *bf; + + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) { + ath_rx_edma_cleanup(sc); + return; + } + + list_for_each_entry(bf, &sc->rx.rxbuf, list) { + skb = bf->bf_mpdu; + if (skb) { + dma_unmap_single(sc->dev, bf->bf_buf_addr, + common->rx_bufsize, + DMA_FROM_DEVICE); + dev_kfree_skb(skb); + bf->bf_buf_addr = 0; + bf->bf_mpdu = NULL; + } + } +} + +/* + * Calculate the receive filter according to the + * operating mode and state: + * + * o always accept unicast, broadcast, and multicast traffic + * o maintain current state of phy error reception (the hal + * may enable phy error frames for noise immunity work) + * o probe request frames are accepted only when operating in + * hostap, adhoc, or monitor modes + * o enable promiscuous mode according to the interface state + * o accept beacons: + * - when operating in adhoc mode so the 802.11 layer creates + * node table entries for peers, + * - when operating in station mode for collecting rssi data when + * the station is otherwise quiet, or + * - when operating as a repeater so we see repeater-sta beacons + * - when scanning + */ + +u32 ath_calcrxfilter(struct ath_softc *sc) +{ + u32 rfilt; + + rfilt = ATH9K_RX_FILTER_UCAST | ATH9K_RX_FILTER_BCAST + | ATH9K_RX_FILTER_MCAST; + + /* if operating on a DFS channel, enable radar pulse detection */ + if (sc->hw->conf.radar_enabled) + rfilt |= ATH9K_RX_FILTER_PHYRADAR | ATH9K_RX_FILTER_PHYERR; + + if (sc->rx.rxfilter & FIF_PROBE_REQ) + rfilt |= ATH9K_RX_FILTER_PROBEREQ; + + /* + * Set promiscuous mode when FIF_PROMISC_IN_BSS is enabled for station + * mode interface or when in monitor mode. AP mode does not need this + * since it receives all in-BSS frames anyway. + */ + if (sc->sc_ah->is_monitoring) + rfilt |= ATH9K_RX_FILTER_PROM; + + if (sc->rx.rxfilter & FIF_CONTROL) + rfilt |= ATH9K_RX_FILTER_CONTROL; + + if ((sc->sc_ah->opmode == NL80211_IFTYPE_STATION) && + (sc->nvifs <= 1) && + !(sc->rx.rxfilter & FIF_BCN_PRBRESP_PROMISC)) + rfilt |= ATH9K_RX_FILTER_MYBEACON; + else + rfilt |= ATH9K_RX_FILTER_BEACON; + + if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) || + (sc->rx.rxfilter & FIF_PSPOLL)) + rfilt |= ATH9K_RX_FILTER_PSPOLL; + + if (conf_is_ht(&sc->hw->conf)) + rfilt |= ATH9K_RX_FILTER_COMP_BAR; + + if (sc->nvifs > 1 || (sc->rx.rxfilter & FIF_OTHER_BSS)) { + /* This is needed for older chips */ + if (sc->sc_ah->hw_version.macVersion <= AR_SREV_VERSION_9160) + rfilt |= ATH9K_RX_FILTER_PROM; + rfilt |= ATH9K_RX_FILTER_MCAST_BCAST_ALL; + } + + if (AR_SREV_9550(sc->sc_ah)) + rfilt |= ATH9K_RX_FILTER_4ADDRESS; + + return rfilt; + +} + +int ath_startrecv(struct ath_softc *sc) +{ + struct ath_hw *ah = sc->sc_ah; + struct ath_buf *bf, *tbf; + + if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) { + ath_edma_start_recv(sc); + return 0; + } + + if (list_empty(&sc->rx.rxbuf)) + goto start_recv; + + sc->rx.buf_hold = NULL; + sc->rx.rxlink = NULL; + list_for_each_entry_safe(bf, tbf, &sc->rx.rxbuf, list) { + ath_rx_buf_link(sc, bf); + } + + /* We could have deleted elements so the list may be empty now */ + if (list_empty(&sc->rx.rxbuf)) + goto start_recv; + + bf = list_first_entry(&sc->rx.rxbuf, struct ath_buf, list); + ath9k_hw_putrxbuf(ah, bf->bf_daddr); + ath9k_hw_rxena(ah); + +start_recv: + ath_opmode_init(sc); + ath9k_hw_startpcureceive(ah, !!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)); + + return 0; +} + +static void ath_flushrecv(struct ath_softc *sc) +{ + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) + ath_rx_tasklet(sc, 1, true); + ath_rx_tasklet(sc, 1, false); +} + +bool ath_stoprecv(struct ath_softc *sc) +{ + struct ath_hw *ah = sc->sc_ah; + bool stopped, reset = false; + + ath9k_hw_abortpcurecv(ah); + ath9k_hw_setrxfilter(ah, 0); + stopped = ath9k_hw_stopdmarecv(ah, &reset); + + ath_flushrecv(sc); + + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) + ath_edma_stop_recv(sc); + else + sc->rx.rxlink = NULL; + + if (!(ah->ah_flags & AH_UNPLUGGED) && + unlikely(!stopped)) { + ath_err(ath9k_hw_common(sc->sc_ah), + "Could not stop RX, we could be " + "confusing the DMA engine when we start RX up\n"); + ATH_DBG_WARN_ON_ONCE(!stopped); + } + return stopped && !reset; +} + +static bool ath_beacon_dtim_pending_cab(struct sk_buff *skb) +{ + /* Check whether the Beacon frame has DTIM indicating buffered bc/mc */ + struct ieee80211_mgmt *mgmt; + u8 *pos, *end, id, elen; + struct ieee80211_tim_ie *tim; + + mgmt = (struct ieee80211_mgmt *)skb->data; + pos = mgmt->u.beacon.variable; + end = skb->data + skb->len; + + while (pos + 2 < end) { + id = *pos++; + elen = *pos++; + if (pos + elen > end) + break; + + if (id == WLAN_EID_TIM) { + if (elen < sizeof(*tim)) + break; + tim = (struct ieee80211_tim_ie *) pos; + if (tim->dtim_count != 0) + break; + return tim->bitmap_ctrl & 0x01; + } + + pos += elen; + } + + return false; +} + +static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb) +{ + struct ath_common *common = ath9k_hw_common(sc->sc_ah); + + if (skb->len < 24 + 8 + 2 + 2) + return; + + sc->ps_flags &= ~PS_WAIT_FOR_BEACON; + + if (sc->ps_flags & PS_BEACON_SYNC) { + sc->ps_flags &= ~PS_BEACON_SYNC; + ath_dbg(common, PS, + "Reconfigure beacon timers based on synchronized timestamp\n"); + ath9k_set_beacon(sc); + } + + if (ath_beacon_dtim_pending_cab(skb)) { + /* + * Remain awake waiting for buffered broadcast/multicast + * frames. If the last broadcast/multicast frame is not + * received properly, the next beacon frame will work as + * a backup trigger for returning into NETWORK SLEEP state, + * so we are waiting for it as well. + */ + ath_dbg(common, PS, + "Received DTIM beacon indicating buffered broadcast/multicast frame(s)\n"); + sc->ps_flags |= PS_WAIT_FOR_CAB | PS_WAIT_FOR_BEACON; + return; + } + + if (sc->ps_flags & PS_WAIT_FOR_CAB) { + /* + * This can happen if a broadcast frame is dropped or the AP + * fails to send a frame indicating that all CAB frames have + * been delivered. + */ + sc->ps_flags &= ~PS_WAIT_FOR_CAB; + ath_dbg(common, PS, "PS wait for CAB frames timed out\n"); + } +} + +static void ath_rx_ps(struct ath_softc *sc, struct sk_buff *skb, bool mybeacon) +{ + struct ieee80211_hdr *hdr; + struct ath_common *common = ath9k_hw_common(sc->sc_ah); + + hdr = (struct ieee80211_hdr *)skb->data; + + /* Process Beacon and CAB receive in PS state */ + if (((sc->ps_flags & PS_WAIT_FOR_BEACON) || ath9k_check_auto_sleep(sc)) + && mybeacon) { + ath_rx_ps_beacon(sc, skb); + } else if ((sc->ps_flags & PS_WAIT_FOR_CAB) && + (ieee80211_is_data(hdr->frame_control) || + ieee80211_is_action(hdr->frame_control)) && + is_multicast_ether_addr(hdr->addr1) && + !ieee80211_has_moredata(hdr->frame_control)) { + /* + * No more broadcast/multicast frames to be received at this + * point. + */ + sc->ps_flags &= ~(PS_WAIT_FOR_CAB | PS_WAIT_FOR_BEACON); + ath_dbg(common, PS, + "All PS CAB frames received, back to sleep\n"); + } else if ((sc->ps_flags & PS_WAIT_FOR_PSPOLL_DATA) && + !is_multicast_ether_addr(hdr->addr1) && + !ieee80211_has_morefrags(hdr->frame_control)) { + sc->ps_flags &= ~PS_WAIT_FOR_PSPOLL_DATA; + ath_dbg(common, PS, + "Going back to sleep after having received PS-Poll data (0x%lx)\n", + sc->ps_flags & (PS_WAIT_FOR_BEACON | + PS_WAIT_FOR_CAB | + PS_WAIT_FOR_PSPOLL_DATA | + PS_WAIT_FOR_TX_ACK)); + } +} + +static bool ath_edma_get_buffers(struct ath_softc *sc, + enum ath9k_rx_qtype qtype, + struct ath_rx_status *rs, + struct ath_buf **dest) +{ + struct ath_rx_edma *rx_edma = &sc->rx.rx_edma[qtype]; + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); + struct sk_buff *skb; + struct ath_buf *bf; + int ret; + + skb = skb_peek(&rx_edma->rx_fifo); + if (!skb) + return false; + + bf = SKB_CB_ATHBUF(skb); + BUG_ON(!bf); + + dma_sync_single_for_cpu(sc->dev, bf->bf_buf_addr, + common->rx_bufsize, DMA_FROM_DEVICE); + + ret = ath9k_hw_process_rxdesc_edma(ah, rs, skb->data); + if (ret == -EINPROGRESS) { + /*let device gain the buffer again*/ + dma_sync_single_for_device(sc->dev, bf->bf_buf_addr, + common->rx_bufsize, DMA_FROM_DEVICE); + return false; + } + + __skb_unlink(skb, &rx_edma->rx_fifo); + if (ret == -EINVAL) { + /* corrupt descriptor, skip this one and the following one */ + list_add_tail(&bf->list, &sc->rx.rxbuf); + ath_rx_edma_buf_link(sc, qtype); + + skb = skb_peek(&rx_edma->rx_fifo); + if (skb) { + bf = SKB_CB_ATHBUF(skb); + BUG_ON(!bf); + + __skb_unlink(skb, &rx_edma->rx_fifo); + list_add_tail(&bf->list, &sc->rx.rxbuf); + ath_rx_edma_buf_link(sc, qtype); + } + + bf = NULL; + } + + *dest = bf; + return true; +} + +static struct ath_buf *ath_edma_get_next_rx_buf(struct ath_softc *sc, + struct ath_rx_status *rs, + enum ath9k_rx_qtype qtype) +{ + struct ath_buf *bf = NULL; + + while (ath_edma_get_buffers(sc, qtype, rs, &bf)) { + if (!bf) + continue; + + return bf; + } + return NULL; +} + +static struct ath_buf *ath_get_next_rx_buf(struct ath_softc *sc, + struct ath_rx_status *rs) +{ + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); + struct ath_desc *ds; + struct ath_buf *bf; + int ret; + + if (list_empty(&sc->rx.rxbuf)) { + sc->rx.rxlink = NULL; + return NULL; + } + + bf = list_first_entry(&sc->rx.rxbuf, struct ath_buf, list); + if (bf == sc->rx.buf_hold) + return NULL; + + ds = bf->bf_desc; + + /* + * Must provide the virtual address of the current + * descriptor, the physical address, and the virtual + * address of the next descriptor in the h/w chain. + * This allows the HAL to look ahead to see if the + * hardware is done with a descriptor by checking the + * done bit in the following descriptor and the address + * of the current descriptor the DMA engine is working + * on. All this is necessary because of our use of + * a self-linked list to avoid rx overruns. + */ + ret = ath9k_hw_rxprocdesc(ah, ds, rs); + if (ret == -EINPROGRESS) { + struct ath_rx_status trs; + struct ath_buf *tbf; + struct ath_desc *tds; + + memset(&trs, 0, sizeof(trs)); + if (list_is_last(&bf->list, &sc->rx.rxbuf)) { + sc->rx.rxlink = NULL; + return NULL; + } + + tbf = list_entry(bf->list.next, struct ath_buf, list); + + /* + * On some hardware the descriptor status words could + * get corrupted, including the done bit. Because of + * this, check if the next descriptor's done bit is + * set or not. + * + * If the next descriptor's done bit is set, the current + * descriptor has been corrupted. Force s/w to discard + * this descriptor and continue... + */ + + tds = tbf->bf_desc; + ret = ath9k_hw_rxprocdesc(ah, tds, &trs); + if (ret == -EINPROGRESS) + return NULL; + + /* + * mark descriptor as zero-length and set the 'more' + * flag to ensure that both buffers get discarded + */ + rs->rs_datalen = 0; + rs->rs_more = true; + } + + list_del(&bf->list); + if (!bf->bf_mpdu) + return bf; + + /* + * Synchronize the DMA transfer with CPU before + * 1. accessing the frame + * 2. requeueing the same buffer to h/w + */ + dma_sync_single_for_cpu(sc->dev, bf->bf_buf_addr, + common->rx_bufsize, + DMA_FROM_DEVICE); + + return bf; +} + +/* Assumes you've already done the endian to CPU conversion */ +static bool ath9k_rx_accept(struct ath_common *common, + struct ieee80211_hdr *hdr, + struct ieee80211_rx_status *rxs, + struct ath_rx_status *rx_stats, + bool *decrypt_error) +{ + struct ath_softc *sc = (struct ath_softc *) common->priv; + bool is_mc, is_valid_tkip, strip_mic, mic_error; + struct ath_hw *ah = common->ah; + __le16 fc; + u8 rx_status_len = ah->caps.rx_status_len; + + fc = hdr->frame_control; + + is_mc = !!is_multicast_ether_addr(hdr->addr1); + is_valid_tkip = rx_stats->rs_keyix != ATH9K_RXKEYIX_INVALID && + test_bit(rx_stats->rs_keyix, common->tkip_keymap); + strip_mic = is_valid_tkip && ieee80211_is_data(fc) && + ieee80211_has_protected(fc) && + !(rx_stats->rs_status & + (ATH9K_RXERR_DECRYPT | ATH9K_RXERR_CRC | ATH9K_RXERR_MIC | + ATH9K_RXERR_KEYMISS)); + + /* + * Key miss events are only relevant for pairwise keys where the + * descriptor does contain a valid key index. This has been observed + * mostly with CCMP encryption. + */ + if (rx_stats->rs_keyix == ATH9K_RXKEYIX_INVALID || + !test_bit(rx_stats->rs_keyix, common->ccmp_keymap)) + rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS; + + if (!rx_stats->rs_datalen) { + RX_STAT_INC(rx_len_err); + return false; + } + + /* + * rs_status follows rs_datalen so if rs_datalen is too large + * we can take a hint that hardware corrupted it, so ignore + * those frames. + */ + if (rx_stats->rs_datalen > (common->rx_bufsize - rx_status_len)) { + RX_STAT_INC(rx_len_err); + return false; + } + + /* Only use error bits from the last fragment */ + if (rx_stats->rs_more) + return true; + + mic_error = is_valid_tkip && !ieee80211_is_ctl(fc) && + !ieee80211_has_morefrags(fc) && + !(le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG) && + (rx_stats->rs_status & ATH9K_RXERR_MIC); + + /* + * The rx_stats->rs_status will not be set until the end of the + * chained descriptors so it can be ignored if rs_more is set. The + * rs_more will be false at the last element of the chained + * descriptors. + */ + if (rx_stats->rs_status != 0) { + u8 status_mask; + + if (rx_stats->rs_status & ATH9K_RXERR_CRC) { + rxs->flag |= RX_FLAG_FAILED_FCS_CRC; + mic_error = false; + } + if (rx_stats->rs_status & ATH9K_RXERR_PHY) + return false; + + if ((rx_stats->rs_status & ATH9K_RXERR_DECRYPT) || + (!is_mc && (rx_stats->rs_status & ATH9K_RXERR_KEYMISS))) { + *decrypt_error = true; + mic_error = false; + } + + /* + * Reject error frames with the exception of + * decryption and MIC failures. For monitor mode, + * we also ignore the CRC error. + */ + status_mask = ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC | + ATH9K_RXERR_KEYMISS; + + if (ah->is_monitoring && (sc->rx.rxfilter & FIF_FCSFAIL)) + status_mask |= ATH9K_RXERR_CRC; + + if (rx_stats->rs_status & ~status_mask) + return false; + } + + /* + * For unicast frames the MIC error bit can have false positives, + * so all MIC error reports need to be validated in software. + * False negatives are not common, so skip software verification + * if the hardware considers the MIC valid. + */ + if (strip_mic) + rxs->flag |= RX_FLAG_MMIC_STRIPPED; + else if (is_mc && mic_error) + rxs->flag |= RX_FLAG_MMIC_ERROR; + + return true; +} + +static int ath9k_process_rate(struct ath_common *common, + struct ieee80211_hw *hw, + struct ath_rx_status *rx_stats, + struct ieee80211_rx_status *rxs) +{ + struct ieee80211_supported_band *sband; + enum ieee80211_band band; + unsigned int i = 0; + struct ath_softc __maybe_unused *sc = common->priv; + + band = hw->conf.chandef.chan->band; + sband = hw->wiphy->bands[band]; + + if (rx_stats->rs_rate & 0x80) { + /* HT rate */ + rxs->flag |= RX_FLAG_HT; + if (rx_stats->rs_flags & ATH9K_RX_2040) + rxs->flag |= RX_FLAG_40MHZ; + if (rx_stats->rs_flags & ATH9K_RX_GI) + rxs->flag |= RX_FLAG_SHORT_GI; + rxs->rate_idx = rx_stats->rs_rate & 0x7f; + return 0; + } + + for (i = 0; i < sband->n_bitrates; i++) { + if (sband->bitrates[i].hw_value == rx_stats->rs_rate) { + rxs->rate_idx = i; + return 0; + } + if (sband->bitrates[i].hw_value_short == rx_stats->rs_rate) { + rxs->flag |= RX_FLAG_SHORTPRE; + rxs->rate_idx = i; + return 0; + } + } + + /* + * No valid hardware bitrate found -- we should not get here + * because hardware has already validated this frame as OK. + */ + ath_dbg(common, ANY, + "unsupported hw bitrate detected 0x%02x using 1 Mbit\n", + rx_stats->rs_rate); + RX_STAT_INC(rx_rate_err); + return -EINVAL; +} + +static void ath9k_process_rssi(struct ath_common *common, + struct ieee80211_hw *hw, + struct ieee80211_hdr *hdr, + struct ath_rx_status *rx_stats) +{ + struct ath_softc *sc = hw->priv; + struct ath_hw *ah = common->ah; + int last_rssi; + int rssi = rx_stats->rs_rssi; + + if (!rx_stats->is_mybeacon || + ((ah->opmode != NL80211_IFTYPE_STATION) && + (ah->opmode != NL80211_IFTYPE_ADHOC))) + return; + + if (rx_stats->rs_rssi != ATH9K_RSSI_BAD && !rx_stats->rs_moreaggr) + ATH_RSSI_LPF(sc->last_rssi, rx_stats->rs_rssi); + + last_rssi = sc->last_rssi; + if (likely(last_rssi != ATH_RSSI_DUMMY_MARKER)) + rssi = ATH_EP_RND(last_rssi, ATH_RSSI_EP_MULTIPLIER); + if (rssi < 0) + rssi = 0; + + /* Update Beacon RSSI, this is used by ANI. */ + ah->stats.avgbrssi = rssi; +} + +/* + * For Decrypt or Demic errors, we only mark packet status here and always push + * up the frame up to let mac80211 handle the actual error case, be it no + * decryption key or real decryption error. This let us keep statistics there. + */ +static int ath9k_rx_skb_preprocess(struct ath_softc *sc, + struct ieee80211_hdr *hdr, + struct ath_rx_status *rx_stats, + struct ieee80211_rx_status *rx_status, + bool *decrypt_error) +{ + struct ieee80211_hw *hw = sc->hw; + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); + bool discard_current = sc->rx.discard_next; + + sc->rx.discard_next = rx_stats->rs_more; + if (discard_current) + return -EINVAL; + + /* + * everything but the rate is checked here, the rate check is done + * separately to avoid doing two lookups for a rate for each frame. + */ + if (!ath9k_rx_accept(common, hdr, rx_status, rx_stats, decrypt_error)) + return -EINVAL; + + /* Only use status info from the last fragment */ + if (rx_stats->rs_more) + return 0; + + ath9k_process_rssi(common, hw, hdr, rx_stats); + + if (ath9k_process_rate(common, hw, rx_stats, rx_status)) + return -EINVAL; + + rx_status->band = hw->conf.chandef.chan->band; + rx_status->freq = hw->conf.chandef.chan->center_freq; + rx_status->signal = ah->noise + rx_stats->rs_rssi; + rx_status->antenna = rx_stats->rs_antenna; + rx_status->flag |= RX_FLAG_MACTIME_END; + if (rx_stats->rs_moreaggr) + rx_status->flag |= RX_FLAG_NO_SIGNAL_VAL; + + sc->rx.discard_next = false; + return 0; +} + +static void ath9k_rx_skb_postprocess(struct ath_common *common, + struct sk_buff *skb, + struct ath_rx_status *rx_stats, + struct ieee80211_rx_status *rxs, + bool decrypt_error) +{ + struct ath_hw *ah = common->ah; + struct ieee80211_hdr *hdr; + int hdrlen, padpos, padsize; + u8 keyix; + __le16 fc; + + /* see if any padding is done by the hw and remove it */ + hdr = (struct ieee80211_hdr *) skb->data; + hdrlen = ieee80211_get_hdrlen_from_skb(skb); + fc = hdr->frame_control; + padpos = ieee80211_hdrlen(fc); + + /* The MAC header is padded to have 32-bit boundary if the + * packet payload is non-zero. The general calculation for + * padsize would take into account odd header lengths: + * padsize = (4 - padpos % 4) % 4; However, since only + * even-length headers are used, padding can only be 0 or 2 + * bytes and we can optimize this a bit. In addition, we must + * not try to remove padding from short control frames that do + * not have payload. */ + padsize = padpos & 3; + if (padsize && skb->len>=padpos+padsize+FCS_LEN) { + memmove(skb->data + padsize, skb->data, padpos); + skb_pull(skb, padsize); + } + + keyix = rx_stats->rs_keyix; + + if (!(keyix == ATH9K_RXKEYIX_INVALID) && !decrypt_error && + ieee80211_has_protected(fc)) { + rxs->flag |= RX_FLAG_DECRYPTED; + } else if (ieee80211_has_protected(fc) + && !decrypt_error && skb->len >= hdrlen + 4) { + keyix = skb->data[hdrlen + 3] >> 6; + + if (test_bit(keyix, common->keymap)) + rxs->flag |= RX_FLAG_DECRYPTED; + } + if (ah->sw_mgmt_crypto && + (rxs->flag & RX_FLAG_DECRYPTED) && + ieee80211_is_mgmt(fc)) + /* Use software decrypt for management frames. */ + rxs->flag &= ~RX_FLAG_DECRYPTED; +} + +#ifdef CPTCFG_ATH9K_DEBUGFS +static s8 fix_rssi_inv_only(u8 rssi_val) +{ + if (rssi_val == 128) + rssi_val = 0; + return (s8) rssi_val; +} +#endif + +/* returns 1 if this was a spectral frame, even if not handled. */ +static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr, + struct ath_rx_status *rs, u64 tsf) +{ +#ifdef CPTCFG_ATH9K_DEBUGFS + struct ath_hw *ah = sc->sc_ah; + u8 bins[SPECTRAL_HT20_NUM_BINS]; + u8 *vdata = (u8 *)hdr; + struct fft_sample_ht20 fft_sample; + struct ath_radar_info *radar_info; + struct ath_ht20_mag_info *mag_info; + int len = rs->rs_datalen; + int dc_pos; + u16 length, max_magnitude; + + /* AR9280 and before report via ATH9K_PHYERR_RADAR, AR93xx and newer + * via ATH9K_PHYERR_SPECTRAL. Haven't seen ATH9K_PHYERR_FALSE_RADAR_EXT + * yet, but this is supposed to be possible as well. + */ + if (rs->rs_phyerr != ATH9K_PHYERR_RADAR && + rs->rs_phyerr != ATH9K_PHYERR_FALSE_RADAR_EXT && + rs->rs_phyerr != ATH9K_PHYERR_SPECTRAL) + return 0; + + /* check if spectral scan bit is set. This does not have to be checked + * if received through a SPECTRAL phy error, but shouldn't hurt. + */ + radar_info = ((struct ath_radar_info *)&vdata[len]) - 1; + if (!(radar_info->pulse_bw_info & SPECTRAL_SCAN_BITMASK)) + return 0; + + /* Variation in the data length is possible and will be fixed later. + * Note that we only support HT20 for now. + * + * TODO: add HT20_40 support as well. + */ + if ((len > SPECTRAL_HT20_TOTAL_DATA_LEN + 2) || + (len < SPECTRAL_HT20_TOTAL_DATA_LEN - 1)) + return 1; + + fft_sample.tlv.type = ATH_FFT_SAMPLE_HT20; + length = sizeof(fft_sample) - sizeof(fft_sample.tlv); + fft_sample.tlv.length = __cpu_to_be16(length); + + fft_sample.freq = __cpu_to_be16(ah->curchan->chan->center_freq); + fft_sample.rssi = fix_rssi_inv_only(rs->rs_rssi_ctl0); + fft_sample.noise = ah->noise; + + switch (len - SPECTRAL_HT20_TOTAL_DATA_LEN) { + case 0: + /* length correct, nothing to do. */ + memcpy(bins, vdata, SPECTRAL_HT20_NUM_BINS); + break; + case -1: + /* first byte missing, duplicate it. */ + memcpy(&bins[1], vdata, SPECTRAL_HT20_NUM_BINS - 1); + bins[0] = vdata[0]; + break; + case 2: + /* MAC added 2 extra bytes at bin 30 and 32, remove them. */ + memcpy(bins, vdata, 30); + bins[30] = vdata[31]; + memcpy(&bins[31], &vdata[33], SPECTRAL_HT20_NUM_BINS - 31); + break; + case 1: + /* MAC added 2 extra bytes AND first byte is missing. */ + bins[0] = vdata[0]; + memcpy(&bins[0], vdata, 30); + bins[31] = vdata[31]; + memcpy(&bins[32], &vdata[33], SPECTRAL_HT20_NUM_BINS - 32); + break; + default: + return 1; + } + + /* DC value (value in the middle) is the blind spot of the spectral + * sample and invalid, interpolate it. + */ + dc_pos = SPECTRAL_HT20_NUM_BINS / 2; + bins[dc_pos] = (bins[dc_pos + 1] + bins[dc_pos - 1]) / 2; + + /* mag data is at the end of the frame, in front of radar_info */ + mag_info = ((struct ath_ht20_mag_info *)radar_info) - 1; + + /* copy raw bins without scaling them */ + memcpy(fft_sample.data, bins, SPECTRAL_HT20_NUM_BINS); + fft_sample.max_exp = mag_info->max_exp & 0xf; + + max_magnitude = spectral_max_magnitude(mag_info->all_bins); + fft_sample.max_magnitude = __cpu_to_be16(max_magnitude); + fft_sample.max_index = spectral_max_index(mag_info->all_bins); + fft_sample.bitmap_weight = spectral_bitmap_weight(mag_info->all_bins); + fft_sample.tsf = __cpu_to_be64(tsf); + + ath_debug_send_fft_sample(sc, &fft_sample.tlv); + return 1; +#else + return 0; +#endif +} + +static void ath9k_apply_ampdu_details(struct ath_softc *sc, + struct ath_rx_status *rs, struct ieee80211_rx_status *rxs) +{ + if (rs->rs_isaggr) { + rxs->flag |= RX_FLAG_AMPDU_DETAILS | RX_FLAG_AMPDU_LAST_KNOWN; + + rxs->ampdu_reference = sc->rx.ampdu_ref; + + if (!rs->rs_moreaggr) { + rxs->flag |= RX_FLAG_AMPDU_IS_LAST; + sc->rx.ampdu_ref++; + } + + if (rs->rs_flags & ATH9K_RX_DELIM_CRC_PRE) + rxs->flag |= RX_FLAG_AMPDU_DELIM_CRC_ERROR; + } +} + +int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) +{ + struct ath_buf *bf; + struct sk_buff *skb = NULL, *requeue_skb, *hdr_skb; + struct ieee80211_rx_status *rxs; + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); + struct ieee80211_hw *hw = sc->hw; + struct ieee80211_hdr *hdr; + int retval; + struct ath_rx_status rs; + enum ath9k_rx_qtype qtype; + bool edma = !!(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA); + int dma_type; + u8 rx_status_len = ah->caps.rx_status_len; + u64 tsf = 0; + u32 tsf_lower = 0; + unsigned long flags; + dma_addr_t new_buf_addr; + + if (edma) + dma_type = DMA_BIDIRECTIONAL; + else + dma_type = DMA_FROM_DEVICE; + + qtype = hp ? ATH9K_RX_QUEUE_HP : ATH9K_RX_QUEUE_LP; + + tsf = ath9k_hw_gettsf64(ah); + tsf_lower = tsf & 0xffffffff; + + do { + bool decrypt_error = false; + + memset(&rs, 0, sizeof(rs)); + if (edma) + bf = ath_edma_get_next_rx_buf(sc, &rs, qtype); + else + bf = ath_get_next_rx_buf(sc, &rs); + + if (!bf) + break; + + skb = bf->bf_mpdu; + if (!skb) + continue; + + /* + * Take frame header from the first fragment and RX status from + * the last one. + */ + if (sc->rx.frag) + hdr_skb = sc->rx.frag; + else + hdr_skb = skb; + + hdr = (struct ieee80211_hdr *) (hdr_skb->data + rx_status_len); + rxs = IEEE80211_SKB_RXCB(hdr_skb); + if (ieee80211_is_beacon(hdr->frame_control)) { + RX_STAT_INC(rx_beacons); + if (!is_zero_ether_addr(common->curbssid) && + ether_addr_equal(hdr->addr3, common->curbssid)) + rs.is_mybeacon = true; + else + rs.is_mybeacon = false; + } + else + rs.is_mybeacon = false; + + if (ieee80211_is_data_present(hdr->frame_control) && + !ieee80211_is_qos_nullfunc(hdr->frame_control)) + sc->rx.num_pkts++; + + ath_debug_stat_rx(sc, &rs); + + memset(rxs, 0, sizeof(struct ieee80211_rx_status)); + + rxs->mactime = (tsf & ~0xffffffffULL) | rs.rs_tstamp; + if (rs.rs_tstamp > tsf_lower && + unlikely(rs.rs_tstamp - tsf_lower > 0x10000000)) + rxs->mactime -= 0x100000000ULL; + + if (rs.rs_tstamp < tsf_lower && + unlikely(tsf_lower - rs.rs_tstamp > 0x10000000)) + rxs->mactime += 0x100000000ULL; + + if (rs.rs_phyerr == ATH9K_PHYERR_RADAR) + ath9k_dfs_process_phyerr(sc, hdr, &rs, rxs->mactime); + + if (rs.rs_status & ATH9K_RXERR_PHY) { + if (ath_process_fft(sc, hdr, &rs, rxs->mactime)) { + RX_STAT_INC(rx_spectral); + goto requeue_drop_frag; + } + } + + retval = ath9k_rx_skb_preprocess(sc, hdr, &rs, rxs, + &decrypt_error); + if (retval) + goto requeue_drop_frag; + + if (rs.is_mybeacon) { + sc->hw_busy_count = 0; + ath_start_rx_poll(sc, 3); + } + /* Ensure we always have an skb to requeue once we are done + * processing the current buffer's skb */ + requeue_skb = ath_rxbuf_alloc(common, common->rx_bufsize, GFP_ATOMIC); + + /* If there is no memory we ignore the current RX'd frame, + * tell hardware it can give us a new frame using the old + * skb and put it at the tail of the sc->rx.rxbuf list for + * processing. */ + if (!requeue_skb) { + RX_STAT_INC(rx_oom_err); + goto requeue_drop_frag; + } + + /* We will now give hardware our shiny new allocated skb */ + new_buf_addr = dma_map_single(sc->dev, requeue_skb->data, + common->rx_bufsize, dma_type); + if (unlikely(dma_mapping_error(sc->dev, new_buf_addr))) { + dev_kfree_skb_any(requeue_skb); + goto requeue_drop_frag; + } + + /* Unmap the frame */ + dma_unmap_single(sc->dev, bf->bf_buf_addr, + common->rx_bufsize, dma_type); + + bf->bf_mpdu = requeue_skb; + bf->bf_buf_addr = new_buf_addr; + + skb_put(skb, rs.rs_datalen + ah->caps.rx_status_len); + if (ah->caps.rx_status_len) + skb_pull(skb, ah->caps.rx_status_len); + + if (!rs.rs_more) + ath9k_rx_skb_postprocess(common, hdr_skb, &rs, + rxs, decrypt_error); + + if (rs.rs_more) { + RX_STAT_INC(rx_frags); + /* + * rs_more indicates chained descriptors which can be + * used to link buffers together for a sort of + * scatter-gather operation. + */ + if (sc->rx.frag) { + /* too many fragments - cannot handle frame */ + dev_kfree_skb_any(sc->rx.frag); + dev_kfree_skb_any(skb); + RX_STAT_INC(rx_too_many_frags_err); + skb = NULL; + } + sc->rx.frag = skb; + goto requeue; + } + if (rs.rs_status & ATH9K_RXERR_CORRUPT_DESC) + goto requeue_drop_frag; + + if (sc->rx.frag) { + int space = skb->len - skb_tailroom(hdr_skb); + + if (pskb_expand_head(hdr_skb, 0, space, GFP_ATOMIC) < 0) { + dev_kfree_skb(skb); + RX_STAT_INC(rx_oom_err); + goto requeue_drop_frag; + } + + sc->rx.frag = NULL; + + skb_copy_from_linear_data(skb, skb_put(hdr_skb, skb->len), + skb->len); + dev_kfree_skb_any(skb); + skb = hdr_skb; + } + + + if (ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB) { + + /* + * change the default rx antenna if rx diversity + * chooses the other antenna 3 times in a row. + */ + if (sc->rx.defant != rs.rs_antenna) { + if (++sc->rx.rxotherant >= 3) + ath_setdefantenna(sc, rs.rs_antenna); + } else { + sc->rx.rxotherant = 0; + } + + } + + if (rxs->flag & RX_FLAG_MMIC_STRIPPED) + skb_trim(skb, skb->len - 8); + + spin_lock_irqsave(&sc->sc_pm_lock, flags); + if ((sc->ps_flags & (PS_WAIT_FOR_BEACON | + PS_WAIT_FOR_CAB | + PS_WAIT_FOR_PSPOLL_DATA)) || + ath9k_check_auto_sleep(sc)) + ath_rx_ps(sc, skb, rs.is_mybeacon); + spin_unlock_irqrestore(&sc->sc_pm_lock, flags); + + if ((ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB) && sc->ant_rx == 3) + ath_ant_comb_scan(sc, &rs); + + ath9k_apply_ampdu_details(sc, &rs, rxs); + + ieee80211_rx(hw, skb); + +requeue_drop_frag: + if (sc->rx.frag) { + dev_kfree_skb_any(sc->rx.frag); + sc->rx.frag = NULL; + } +requeue: + list_add_tail(&bf->list, &sc->rx.rxbuf); + if (flush) + continue; + + if (edma) { + ath_rx_edma_buf_link(sc, qtype); + } else { + ath_rx_buf_relink(sc, bf); + ath9k_hw_rxena(ah); + } + } while (1); + + if (!(ah->imask & ATH9K_INT_RXEOL)) { + ah->imask |= (ATH9K_INT_RXEOL | ATH9K_INT_RXORN); + ath9k_hw_set_interrupts(ah); + } + + return 0; +} |