diff options
Diffstat (limited to 'drivers/net/ethernet/atheros/atl1c/atl1c_hw.c')
| -rw-r--r-- | drivers/net/ethernet/atheros/atl1c/atl1c_hw.c | 865 |
1 files changed, 865 insertions, 0 deletions
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c new file mode 100644 index 0000000..3ef7092 --- /dev/null +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c @@ -0,0 +1,865 @@ +/* + * Copyright(c) 2007 Atheros Corporation. All rights reserved. + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/mii.h> +#include <linux/crc32.h> + +#include "atl1c.h" + +/* + * check_eeprom_exist + * return 1 if eeprom exist + */ +int atl1c_check_eeprom_exist(struct atl1c_hw *hw) +{ + u32 data; + + AT_READ_REG(hw, REG_TWSI_DEBUG, &data); + if (data & TWSI_DEBUG_DEV_EXIST) + return 1; + + AT_READ_REG(hw, REG_MASTER_CTRL, &data); + if (data & MASTER_CTRL_OTP_SEL) + return 1; + return 0; +} + +void atl1c_hw_set_mac_addr(struct atl1c_hw *hw, u8 *mac_addr) +{ + u32 value; + /* + * 00-0B-6A-F6-00-DC + * 0: 6AF600DC 1: 000B + * low dword + */ + value = mac_addr[2] << 24 | + mac_addr[3] << 16 | + mac_addr[4] << 8 | + mac_addr[5]; + AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 0, value); + /* hight dword */ + value = mac_addr[0] << 8 | + mac_addr[1]; + AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 1, value); +} + +/* read mac address from hardware register */ +static bool atl1c_read_current_addr(struct atl1c_hw *hw, u8 *eth_addr) +{ + u32 addr[2]; + + AT_READ_REG(hw, REG_MAC_STA_ADDR, &addr[0]); + AT_READ_REG(hw, REG_MAC_STA_ADDR + 4, &addr[1]); + + *(u32 *) ð_addr[2] = htonl(addr[0]); + *(u16 *) ð_addr[0] = htons((u16)addr[1]); + + return is_valid_ether_addr(eth_addr); +} + +/* + * atl1c_get_permanent_address + * return 0 if get valid mac address, + */ +static int atl1c_get_permanent_address(struct atl1c_hw *hw) +{ + u32 i; + u32 otp_ctrl_data; + u32 twsi_ctrl_data; + u16 phy_data; + bool raise_vol = false; + + /* MAC-address from BIOS is the 1st priority */ + if (atl1c_read_current_addr(hw, hw->perm_mac_addr)) + return 0; + + /* init */ + AT_READ_REG(hw, REG_OTP_CTRL, &otp_ctrl_data); + if (atl1c_check_eeprom_exist(hw)) { + if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c) { + /* Enable OTP CLK */ + if (!(otp_ctrl_data & OTP_CTRL_CLK_EN)) { + otp_ctrl_data |= OTP_CTRL_CLK_EN; + AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data); + AT_WRITE_FLUSH(hw); + msleep(1); + } + } + /* raise voltage temporally for l2cb */ + if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l2c_b2) { + atl1c_read_phy_dbg(hw, MIIDBG_ANACTRL, &phy_data); + phy_data &= ~ANACTRL_HB_EN; + atl1c_write_phy_dbg(hw, MIIDBG_ANACTRL, phy_data); + atl1c_read_phy_dbg(hw, MIIDBG_VOLT_CTRL, &phy_data); + phy_data |= VOLT_CTRL_SWLOWEST; + atl1c_write_phy_dbg(hw, MIIDBG_VOLT_CTRL, phy_data); + udelay(20); + raise_vol = true; + } + + AT_READ_REG(hw, REG_TWSI_CTRL, &twsi_ctrl_data); + twsi_ctrl_data |= TWSI_CTRL_SW_LDSTART; + AT_WRITE_REG(hw, REG_TWSI_CTRL, twsi_ctrl_data); + for (i = 0; i < AT_TWSI_EEPROM_TIMEOUT; i++) { + msleep(10); + AT_READ_REG(hw, REG_TWSI_CTRL, &twsi_ctrl_data); + if ((twsi_ctrl_data & TWSI_CTRL_SW_LDSTART) == 0) + break; + } + if (i >= AT_TWSI_EEPROM_TIMEOUT) + return -1; + } + /* Disable OTP_CLK */ + if ((hw->nic_type == athr_l1c || hw->nic_type == athr_l2c)) { + otp_ctrl_data &= ~OTP_CTRL_CLK_EN; + AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data); + msleep(1); + } + if (raise_vol) { + atl1c_read_phy_dbg(hw, MIIDBG_ANACTRL, &phy_data); + phy_data |= ANACTRL_HB_EN; + atl1c_write_phy_dbg(hw, MIIDBG_ANACTRL, phy_data); + atl1c_read_phy_dbg(hw, MIIDBG_VOLT_CTRL, &phy_data); + phy_data &= ~VOLT_CTRL_SWLOWEST; + atl1c_write_phy_dbg(hw, MIIDBG_VOLT_CTRL, phy_data); + udelay(20); + } + + if (atl1c_read_current_addr(hw, hw->perm_mac_addr)) + return 0; + + return -1; +} + +bool atl1c_read_eeprom(struct atl1c_hw *hw, u32 offset, u32 *p_value) +{ + int i; + int ret = false; + u32 otp_ctrl_data; + u32 control; + u32 data; + + if (offset & 3) + return ret; /* address do not align */ + + AT_READ_REG(hw, REG_OTP_CTRL, &otp_ctrl_data); + if (!(otp_ctrl_data & OTP_CTRL_CLK_EN)) + AT_WRITE_REG(hw, REG_OTP_CTRL, + (otp_ctrl_data | OTP_CTRL_CLK_EN)); + + AT_WRITE_REG(hw, REG_EEPROM_DATA_LO, 0); + control = (offset & EEPROM_CTRL_ADDR_MASK) << EEPROM_CTRL_ADDR_SHIFT; + AT_WRITE_REG(hw, REG_EEPROM_CTRL, control); + + for (i = 0; i < 10; i++) { + udelay(100); + AT_READ_REG(hw, REG_EEPROM_CTRL, &control); + if (control & EEPROM_CTRL_RW) + break; + } + if (control & EEPROM_CTRL_RW) { + AT_READ_REG(hw, REG_EEPROM_CTRL, &data); + AT_READ_REG(hw, REG_EEPROM_DATA_LO, p_value); + data = data & 0xFFFF; + *p_value = swab32((data << 16) | (*p_value >> 16)); + ret = true; + } + if (!(otp_ctrl_data & OTP_CTRL_CLK_EN)) + AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data); + + return ret; +} +/* + * Reads the adapter's MAC address from the EEPROM + * + * hw - Struct containing variables accessed by shared code + */ +int atl1c_read_mac_addr(struct atl1c_hw *hw) +{ + int err = 0; + + err = atl1c_get_permanent_address(hw); + if (err) + eth_random_addr(hw->perm_mac_addr); + + memcpy(hw->mac_addr, hw->perm_mac_addr, sizeof(hw->perm_mac_addr)); + return err; +} + +/* + * atl1c_hash_mc_addr + * purpose + * set hash value for a multicast address + * hash calcu processing : + * 1. calcu 32bit CRC for multicast address + * 2. reverse crc with MSB to LSB + */ +u32 atl1c_hash_mc_addr(struct atl1c_hw *hw, u8 *mc_addr) +{ + u32 crc32; + u32 value = 0; + int i; + + crc32 = ether_crc_le(6, mc_addr); + for (i = 0; i < 32; i++) + value |= (((crc32 >> i) & 1) << (31 - i)); + + return value; +} + +/* + * Sets the bit in the multicast table corresponding to the hash value. + * hw - Struct containing variables accessed by shared code + * hash_value - Multicast address hash value + */ +void atl1c_hash_set(struct atl1c_hw *hw, u32 hash_value) +{ + u32 hash_bit, hash_reg; + u32 mta; + + /* + * The HASH Table is a register array of 2 32-bit registers. + * It is treated like an array of 64 bits. We want to set + * bit BitArray[hash_value]. So we figure out what register + * the bit is in, read it, OR in the new bit, then write + * back the new value. The register is determined by the + * upper bit of the hash value and the bit within that + * register are determined by the lower 5 bits of the value. + */ + hash_reg = (hash_value >> 31) & 0x1; + hash_bit = (hash_value >> 26) & 0x1F; + + mta = AT_READ_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg); + + mta |= (1 << hash_bit); + + AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg, mta); +} + +/* + * wait mdio module be idle + * return true: idle + * false: still busy + */ +bool atl1c_wait_mdio_idle(struct atl1c_hw *hw) +{ + u32 val; + int i; + + for (i = 0; i < MDIO_MAX_AC_TO; i++) { + AT_READ_REG(hw, REG_MDIO_CTRL, &val); + if (!(val & (MDIO_CTRL_BUSY | MDIO_CTRL_START))) + break; + udelay(10); + } + + return i != MDIO_MAX_AC_TO; +} + +void atl1c_stop_phy_polling(struct atl1c_hw *hw) +{ + if (!(hw->ctrl_flags & ATL1C_FPGA_VERSION)) + return; + + AT_WRITE_REG(hw, REG_MDIO_CTRL, 0); + atl1c_wait_mdio_idle(hw); +} + +void atl1c_start_phy_polling(struct atl1c_hw *hw, u16 clk_sel) +{ + u32 val; + + if (!(hw->ctrl_flags & ATL1C_FPGA_VERSION)) + return; + + val = MDIO_CTRL_SPRES_PRMBL | + FIELDX(MDIO_CTRL_CLK_SEL, clk_sel) | + FIELDX(MDIO_CTRL_REG, 1) | + MDIO_CTRL_START | + MDIO_CTRL_OP_READ; + AT_WRITE_REG(hw, REG_MDIO_CTRL, val); + atl1c_wait_mdio_idle(hw); + val |= MDIO_CTRL_AP_EN; + val &= ~MDIO_CTRL_START; + AT_WRITE_REG(hw, REG_MDIO_CTRL, val); + udelay(30); +} + + +/* + * atl1c_read_phy_core + * core funtion to read register in PHY via MDIO control regsiter. + * ext: extension register (see IEEE 802.3) + * dev: device address (see IEEE 802.3 DEVAD, PRTAD is fixed to 0) + * reg: reg to read + */ +int atl1c_read_phy_core(struct atl1c_hw *hw, bool ext, u8 dev, + u16 reg, u16 *phy_data) +{ + u32 val; + u16 clk_sel = MDIO_CTRL_CLK_25_4; + + atl1c_stop_phy_polling(hw); + + *phy_data = 0; + + /* only l2c_b2 & l1d_2 could use slow clock */ + if ((hw->nic_type == athr_l2c_b2 || hw->nic_type == athr_l1d_2) && + hw->hibernate) + clk_sel = MDIO_CTRL_CLK_25_128; + if (ext) { + val = FIELDX(MDIO_EXTN_DEVAD, dev) | FIELDX(MDIO_EXTN_REG, reg); + AT_WRITE_REG(hw, REG_MDIO_EXTN, val); + val = MDIO_CTRL_SPRES_PRMBL | + FIELDX(MDIO_CTRL_CLK_SEL, clk_sel) | + MDIO_CTRL_START | + MDIO_CTRL_MODE_EXT | + MDIO_CTRL_OP_READ; + } else { + val = MDIO_CTRL_SPRES_PRMBL | + FIELDX(MDIO_CTRL_CLK_SEL, clk_sel) | + FIELDX(MDIO_CTRL_REG, reg) | + MDIO_CTRL_START | + MDIO_CTRL_OP_READ; + } + AT_WRITE_REG(hw, REG_MDIO_CTRL, val); + + if (!atl1c_wait_mdio_idle(hw)) + return -1; + + AT_READ_REG(hw, REG_MDIO_CTRL, &val); + *phy_data = (u16)FIELD_GETX(val, MDIO_CTRL_DATA); + + atl1c_start_phy_polling(hw, clk_sel); + + return 0; +} + +/* + * atl1c_write_phy_core + * core funtion to write to register in PHY via MDIO control regsiter. + * ext: extension register (see IEEE 802.3) + * dev: device address (see IEEE 802.3 DEVAD, PRTAD is fixed to 0) + * reg: reg to write + */ +int atl1c_write_phy_core(struct atl1c_hw *hw, bool ext, u8 dev, + u16 reg, u16 phy_data) +{ + u32 val; + u16 clk_sel = MDIO_CTRL_CLK_25_4; + + atl1c_stop_phy_polling(hw); + + + /* only l2c_b2 & l1d_2 could use slow clock */ + if ((hw->nic_type == athr_l2c_b2 || hw->nic_type == athr_l1d_2) && + hw->hibernate) + clk_sel = MDIO_CTRL_CLK_25_128; + + if (ext) { + val = FIELDX(MDIO_EXTN_DEVAD, dev) | FIELDX(MDIO_EXTN_REG, reg); + AT_WRITE_REG(hw, REG_MDIO_EXTN, val); + val = MDIO_CTRL_SPRES_PRMBL | + FIELDX(MDIO_CTRL_CLK_SEL, clk_sel) | + FIELDX(MDIO_CTRL_DATA, phy_data) | + MDIO_CTRL_START | + MDIO_CTRL_MODE_EXT; + } else { + val = MDIO_CTRL_SPRES_PRMBL | + FIELDX(MDIO_CTRL_CLK_SEL, clk_sel) | + FIELDX(MDIO_CTRL_DATA, phy_data) | + FIELDX(MDIO_CTRL_REG, reg) | + MDIO_CTRL_START; + } + AT_WRITE_REG(hw, REG_MDIO_CTRL, val); + + if (!atl1c_wait_mdio_idle(hw)) + return -1; + + atl1c_start_phy_polling(hw, clk_sel); + + return 0; +} + +/* + * Reads the value from a PHY register + * hw - Struct containing variables accessed by shared code + * reg_addr - address of the PHY register to read + */ +int atl1c_read_phy_reg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data) +{ + return atl1c_read_phy_core(hw, false, 0, reg_addr, phy_data); +} + +/* + * Writes a value to a PHY register + * hw - Struct containing variables accessed by shared code + * reg_addr - address of the PHY register to write + * data - data to write to the PHY + */ +int atl1c_write_phy_reg(struct atl1c_hw *hw, u32 reg_addr, u16 phy_data) +{ + return atl1c_write_phy_core(hw, false, 0, reg_addr, phy_data); +} + +/* read from PHY extension register */ +int atl1c_read_phy_ext(struct atl1c_hw *hw, u8 dev_addr, + u16 reg_addr, u16 *phy_data) +{ + return atl1c_read_phy_core(hw, true, dev_addr, reg_addr, phy_data); +} + +/* write to PHY extension register */ +int atl1c_write_phy_ext(struct atl1c_hw *hw, u8 dev_addr, + u16 reg_addr, u16 phy_data) +{ + return atl1c_write_phy_core(hw, true, dev_addr, reg_addr, phy_data); +} + +int atl1c_read_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data) +{ + int err; + + err = atl1c_write_phy_reg(hw, MII_DBG_ADDR, reg_addr); + if (unlikely(err)) + return err; + else + err = atl1c_read_phy_reg(hw, MII_DBG_DATA, phy_data); + + return err; +} + +int atl1c_write_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 phy_data) +{ + int err; + + err = atl1c_write_phy_reg(hw, MII_DBG_ADDR, reg_addr); + if (unlikely(err)) + return err; + else + err = atl1c_write_phy_reg(hw, MII_DBG_DATA, phy_data); + + return err; +} + +/* + * Configures PHY autoneg and flow control advertisement settings + * + * hw - Struct containing variables accessed by shared code + */ +static int atl1c_phy_setup_adv(struct atl1c_hw *hw) +{ + u16 mii_adv_data = ADVERTISE_DEFAULT_CAP & ~ADVERTISE_ALL; + u16 mii_giga_ctrl_data = GIGA_CR_1000T_DEFAULT_CAP & + ~GIGA_CR_1000T_SPEED_MASK; + + if (hw->autoneg_advertised & ADVERTISED_10baseT_Half) + mii_adv_data |= ADVERTISE_10HALF; + if (hw->autoneg_advertised & ADVERTISED_10baseT_Full) + mii_adv_data |= ADVERTISE_10FULL; + if (hw->autoneg_advertised & ADVERTISED_100baseT_Half) + mii_adv_data |= ADVERTISE_100HALF; + if (hw->autoneg_advertised & ADVERTISED_100baseT_Full) + mii_adv_data |= ADVERTISE_100FULL; + + if (hw->autoneg_advertised & ADVERTISED_Autoneg) + mii_adv_data |= ADVERTISE_10HALF | ADVERTISE_10FULL | + ADVERTISE_100HALF | ADVERTISE_100FULL; + + if (hw->link_cap_flags & ATL1C_LINK_CAP_1000M) { + if (hw->autoneg_advertised & ADVERTISED_1000baseT_Half) + mii_giga_ctrl_data |= ADVERTISE_1000HALF; + if (hw->autoneg_advertised & ADVERTISED_1000baseT_Full) + mii_giga_ctrl_data |= ADVERTISE_1000FULL; + if (hw->autoneg_advertised & ADVERTISED_Autoneg) + mii_giga_ctrl_data |= ADVERTISE_1000HALF | + ADVERTISE_1000FULL; + } + + if (atl1c_write_phy_reg(hw, MII_ADVERTISE, mii_adv_data) != 0 || + atl1c_write_phy_reg(hw, MII_CTRL1000, mii_giga_ctrl_data) != 0) + return -1; + return 0; +} + +void atl1c_phy_disable(struct atl1c_hw *hw) +{ + atl1c_power_saving(hw, 0); +} + + +int atl1c_phy_reset(struct atl1c_hw *hw) +{ + struct atl1c_adapter *adapter = hw->adapter; + struct pci_dev *pdev = adapter->pdev; + u16 phy_data; + u32 phy_ctrl_data, lpi_ctrl; + int err; + + /* reset PHY core */ + AT_READ_REG(hw, REG_GPHY_CTRL, &phy_ctrl_data); + phy_ctrl_data &= ~(GPHY_CTRL_EXT_RESET | GPHY_CTRL_PHY_IDDQ | + GPHY_CTRL_GATE_25M_EN | GPHY_CTRL_PWDOWN_HW | GPHY_CTRL_CLS); + phy_ctrl_data |= GPHY_CTRL_SEL_ANA_RST; + if (!(hw->ctrl_flags & ATL1C_HIB_DISABLE)) + phy_ctrl_data |= (GPHY_CTRL_HIB_EN | GPHY_CTRL_HIB_PULSE); + else + phy_ctrl_data &= ~(GPHY_CTRL_HIB_EN | GPHY_CTRL_HIB_PULSE); + AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data); + AT_WRITE_FLUSH(hw); + udelay(10); + AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data | GPHY_CTRL_EXT_RESET); + AT_WRITE_FLUSH(hw); + udelay(10 * GPHY_CTRL_EXT_RST_TO); /* delay 800us */ + + /* switch clock */ + if (hw->nic_type == athr_l2c_b) { + atl1c_read_phy_dbg(hw, MIIDBG_CFGLPSPD, &phy_data); + atl1c_write_phy_dbg(hw, MIIDBG_CFGLPSPD, + phy_data & ~CFGLPSPD_RSTCNT_CLK125SW); + } + + /* tx-half amplitude issue fix */ + if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l2c_b2) { + atl1c_read_phy_dbg(hw, MIIDBG_CABLE1TH_DET, &phy_data); + phy_data |= CABLE1TH_DET_EN; + atl1c_write_phy_dbg(hw, MIIDBG_CABLE1TH_DET, phy_data); + } + + /* clear bit3 of dbgport 3B to lower voltage */ + if (!(hw->ctrl_flags & ATL1C_HIB_DISABLE)) { + if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l2c_b2) { + atl1c_read_phy_dbg(hw, MIIDBG_VOLT_CTRL, &phy_data); + phy_data &= ~VOLT_CTRL_SWLOWEST; + atl1c_write_phy_dbg(hw, MIIDBG_VOLT_CTRL, phy_data); + } + /* power saving config */ + phy_data = + hw->nic_type == athr_l1d || hw->nic_type == athr_l1d_2 ? + L1D_LEGCYPS_DEF : L1C_LEGCYPS_DEF; + atl1c_write_phy_dbg(hw, MIIDBG_LEGCYPS, phy_data); + /* hib */ + atl1c_write_phy_dbg(hw, MIIDBG_SYSMODCTRL, + SYSMODCTRL_IECHOADJ_DEF); + } else { + /* disable pws */ + atl1c_read_phy_dbg(hw, MIIDBG_LEGCYPS, &phy_data); + atl1c_write_phy_dbg(hw, MIIDBG_LEGCYPS, + phy_data & ~LEGCYPS_EN); + /* disable hibernate */ + atl1c_read_phy_dbg(hw, MIIDBG_HIBNEG, &phy_data); + atl1c_write_phy_dbg(hw, MIIDBG_HIBNEG, + phy_data & HIBNEG_PSHIB_EN); + } + /* disable AZ(EEE) by default */ + if (hw->nic_type == athr_l1d || hw->nic_type == athr_l1d_2 || + hw->nic_type == athr_l2c_b2) { + AT_READ_REG(hw, REG_LPI_CTRL, &lpi_ctrl); + AT_WRITE_REG(hw, REG_LPI_CTRL, lpi_ctrl & ~LPI_CTRL_EN); + atl1c_write_phy_ext(hw, MIIEXT_ANEG, MIIEXT_LOCAL_EEEADV, 0); + atl1c_write_phy_ext(hw, MIIEXT_PCS, MIIEXT_CLDCTRL3, + L2CB_CLDCTRL3); + } + + /* other debug port to set */ + atl1c_write_phy_dbg(hw, MIIDBG_ANACTRL, ANACTRL_DEF); + atl1c_write_phy_dbg(hw, MIIDBG_SRDSYSMOD, SRDSYSMOD_DEF); + atl1c_write_phy_dbg(hw, MIIDBG_TST10BTCFG, TST10BTCFG_DEF); + /* UNH-IOL test issue, set bit7 */ + atl1c_write_phy_dbg(hw, MIIDBG_TST100BTCFG, + TST100BTCFG_DEF | TST100BTCFG_LITCH_EN); + + /* set phy interrupt mask */ + phy_data = IER_LINK_UP | IER_LINK_DOWN; + err = atl1c_write_phy_reg(hw, MII_IER, phy_data); + if (err) { + if (netif_msg_hw(adapter)) + dev_err(&pdev->dev, + "Error enable PHY linkChange Interrupt\n"); + return err; + } + return 0; +} + +int atl1c_phy_init(struct atl1c_hw *hw) +{ + struct atl1c_adapter *adapter = hw->adapter; + struct pci_dev *pdev = adapter->pdev; + int ret_val; + u16 mii_bmcr_data = BMCR_RESET; + + if ((atl1c_read_phy_reg(hw, MII_PHYSID1, &hw->phy_id1) != 0) || + (atl1c_read_phy_reg(hw, MII_PHYSID2, &hw->phy_id2) != 0)) { + dev_err(&pdev->dev, "Error get phy ID\n"); + return -1; + } + switch (hw->media_type) { + case MEDIA_TYPE_AUTO_SENSOR: + ret_val = atl1c_phy_setup_adv(hw); + if (ret_val) { + if (netif_msg_link(adapter)) + dev_err(&pdev->dev, + "Error Setting up Auto-Negotiation\n"); + return ret_val; + } + mii_bmcr_data |= BMCR_ANENABLE | BMCR_ANRESTART; + break; + case MEDIA_TYPE_100M_FULL: + mii_bmcr_data |= BMCR_SPEED100 | BMCR_FULLDPLX; + break; + case MEDIA_TYPE_100M_HALF: + mii_bmcr_data |= BMCR_SPEED100; + break; + case MEDIA_TYPE_10M_FULL: + mii_bmcr_data |= BMCR_FULLDPLX; + break; + case MEDIA_TYPE_10M_HALF: + break; + default: + if (netif_msg_link(adapter)) + dev_err(&pdev->dev, "Wrong Media type %d\n", + hw->media_type); + return -1; + break; + } + + ret_val = atl1c_write_phy_reg(hw, MII_BMCR, mii_bmcr_data); + if (ret_val) + return ret_val; + hw->phy_configured = true; + + return 0; +} + +/* + * Detects the current speed and duplex settings of the hardware. + * + * hw - Struct containing variables accessed by shared code + * speed - Speed of the connection + * duplex - Duplex setting of the connection + */ +int atl1c_get_speed_and_duplex(struct atl1c_hw *hw, u16 *speed, u16 *duplex) +{ + int err; + u16 phy_data; + + /* Read PHY Specific Status Register (17) */ + err = atl1c_read_phy_reg(hw, MII_GIGA_PSSR, &phy_data); + if (err) + return err; + + if (!(phy_data & GIGA_PSSR_SPD_DPLX_RESOLVED)) + return -1; + + switch (phy_data & GIGA_PSSR_SPEED) { + case GIGA_PSSR_1000MBS: + *speed = SPEED_1000; + break; + case GIGA_PSSR_100MBS: + *speed = SPEED_100; + break; + case GIGA_PSSR_10MBS: + *speed = SPEED_10; + break; + default: + return -1; + break; + } + + if (phy_data & GIGA_PSSR_DPLX) + *duplex = FULL_DUPLEX; + else + *duplex = HALF_DUPLEX; + + return 0; +} + +/* select one link mode to get lower power consumption */ +int atl1c_phy_to_ps_link(struct atl1c_hw *hw) +{ + struct atl1c_adapter *adapter = hw->adapter; + struct pci_dev *pdev = adapter->pdev; + int ret = 0; + u16 autoneg_advertised = ADVERTISED_10baseT_Half; + u16 save_autoneg_advertised; + u16 phy_data; + u16 mii_lpa_data; + u16 speed = SPEED_0; + u16 duplex = FULL_DUPLEX; + int i; + + atl1c_read_phy_reg(hw, MII_BMSR, &phy_data); + atl1c_read_phy_reg(hw, MII_BMSR, &phy_data); + if (phy_data & BMSR_LSTATUS) { + atl1c_read_phy_reg(hw, MII_LPA, &mii_lpa_data); + if (mii_lpa_data & LPA_10FULL) + autoneg_advertised = ADVERTISED_10baseT_Full; + else if (mii_lpa_data & LPA_10HALF) + autoneg_advertised = ADVERTISED_10baseT_Half; + else if (mii_lpa_data & LPA_100HALF) + autoneg_advertised = ADVERTISED_100baseT_Half; + else if (mii_lpa_data & LPA_100FULL) + autoneg_advertised = ADVERTISED_100baseT_Full; + + save_autoneg_advertised = hw->autoneg_advertised; + hw->phy_configured = false; + hw->autoneg_advertised = autoneg_advertised; + if (atl1c_restart_autoneg(hw) != 0) { + dev_dbg(&pdev->dev, "phy autoneg failed\n"); + ret = -1; + } + hw->autoneg_advertised = save_autoneg_advertised; + + if (mii_lpa_data) { + for (i = 0; i < AT_SUSPEND_LINK_TIMEOUT; i++) { + mdelay(100); + atl1c_read_phy_reg(hw, MII_BMSR, &phy_data); + atl1c_read_phy_reg(hw, MII_BMSR, &phy_data); + if (phy_data & BMSR_LSTATUS) { + if (atl1c_get_speed_and_duplex(hw, &speed, + &duplex) != 0) + dev_dbg(&pdev->dev, + "get speed and duplex failed\n"); + break; + } + } + } + } else { + speed = SPEED_10; + duplex = HALF_DUPLEX; + } + adapter->link_speed = speed; + adapter->link_duplex = duplex; + + return ret; +} + +int atl1c_restart_autoneg(struct atl1c_hw *hw) +{ + int err = 0; + u16 mii_bmcr_data = BMCR_RESET; + + err = atl1c_phy_setup_adv(hw); + if (err) + return err; + mii_bmcr_data |= BMCR_ANENABLE | BMCR_ANRESTART; + + return atl1c_write_phy_reg(hw, MII_BMCR, mii_bmcr_data); +} + +int atl1c_power_saving(struct atl1c_hw *hw, u32 wufc) +{ + struct atl1c_adapter *adapter = hw->adapter; + struct pci_dev *pdev = adapter->pdev; + u32 master_ctrl, mac_ctrl, phy_ctrl; + u32 wol_ctrl, speed; + u16 phy_data; + + wol_ctrl = 0; + speed = adapter->link_speed == SPEED_1000 ? + MAC_CTRL_SPEED_1000 : MAC_CTRL_SPEED_10_100; + + AT_READ_REG(hw, REG_MASTER_CTRL, &master_ctrl); + AT_READ_REG(hw, REG_MAC_CTRL, &mac_ctrl); + AT_READ_REG(hw, REG_GPHY_CTRL, &phy_ctrl); + + master_ctrl &= ~MASTER_CTRL_CLK_SEL_DIS; + mac_ctrl = FIELD_SETX(mac_ctrl, MAC_CTRL_SPEED, speed); + mac_ctrl &= ~(MAC_CTRL_DUPLX | MAC_CTRL_RX_EN | MAC_CTRL_TX_EN); + if (adapter->link_duplex == FULL_DUPLEX) + mac_ctrl |= MAC_CTRL_DUPLX; + phy_ctrl &= ~(GPHY_CTRL_EXT_RESET | GPHY_CTRL_CLS); + phy_ctrl |= GPHY_CTRL_SEL_ANA_RST | GPHY_CTRL_HIB_PULSE | + GPHY_CTRL_HIB_EN; + if (!wufc) { /* without WoL */ + master_ctrl |= MASTER_CTRL_CLK_SEL_DIS; + phy_ctrl |= GPHY_CTRL_PHY_IDDQ | GPHY_CTRL_PWDOWN_HW; + AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl); + AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl); + AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl); + AT_WRITE_REG(hw, REG_WOL_CTRL, 0); + hw->phy_configured = false; /* re-init PHY when resume */ + return 0; + } + phy_ctrl |= GPHY_CTRL_EXT_RESET; + if (wufc & AT_WUFC_MAG) { + mac_ctrl |= MAC_CTRL_RX_EN | MAC_CTRL_BC_EN; + wol_ctrl |= WOL_MAGIC_EN | WOL_MAGIC_PME_EN; + if (hw->nic_type == athr_l2c_b && hw->revision_id == L2CB_V11) + wol_ctrl |= WOL_PATTERN_EN | WOL_PATTERN_PME_EN; + } + if (wufc & AT_WUFC_LNKC) { + wol_ctrl |= WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN; + if (atl1c_write_phy_reg(hw, MII_IER, IER_LINK_UP) != 0) { + dev_dbg(&pdev->dev, "%s: write phy MII_IER failed.\n", + atl1c_driver_name); + } + } + /* clear PHY interrupt */ + atl1c_read_phy_reg(hw, MII_ISR, &phy_data); + + dev_dbg(&pdev->dev, "%s: suspend MAC=%x,MASTER=%x,PHY=0x%x,WOL=%x\n", + atl1c_driver_name, mac_ctrl, master_ctrl, phy_ctrl, wol_ctrl); + AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl); + AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl); + AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl); + AT_WRITE_REG(hw, REG_WOL_CTRL, wol_ctrl); + + return 0; +} + + +/* configure phy after Link change Event */ +void atl1c_post_phy_linkchg(struct atl1c_hw *hw, u16 link_speed) +{ + u16 phy_val; + bool adj_thresh = false; + + if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l2c_b2 || + hw->nic_type == athr_l1d || hw->nic_type == athr_l1d_2) + adj_thresh = true; + + if (link_speed != SPEED_0) { /* link up */ + /* az with brcm, half-amp */ + if (hw->nic_type == athr_l1d_2) { + atl1c_read_phy_ext(hw, MIIEXT_PCS, MIIEXT_CLDCTRL6, + &phy_val); + phy_val = FIELD_GETX(phy_val, CLDCTRL6_CAB_LEN); + phy_val = phy_val > CLDCTRL6_CAB_LEN_SHORT ? + AZ_ANADECT_LONG : AZ_ANADECT_DEF; + atl1c_write_phy_dbg(hw, MIIDBG_AZ_ANADECT, phy_val); + } + /* threshold adjust */ + if (adj_thresh && link_speed == SPEED_100 && hw->msi_lnkpatch) { + atl1c_write_phy_dbg(hw, MIIDBG_MSE16DB, L1D_MSE16DB_UP); + atl1c_write_phy_dbg(hw, MIIDBG_SYSMODCTRL, + L1D_SYSMODCTRL_IECHOADJ_DEF); + } + } else { /* link down */ + if (adj_thresh && hw->msi_lnkpatch) { + atl1c_write_phy_dbg(hw, MIIDBG_SYSMODCTRL, + SYSMODCTRL_IECHOADJ_DEF); + atl1c_write_phy_dbg(hw, MIIDBG_MSE16DB, + L1D_MSE16DB_DOWN); + } + } +} |