diff options
Diffstat (limited to 'drivers/media/radio/radio-gemtek.c')
| -rw-r--r-- | drivers/media/radio/radio-gemtek.c | 343 |
1 files changed, 343 insertions, 0 deletions
diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c new file mode 100644 index 0000000..550d1a4 --- /dev/null +++ b/drivers/media/radio/radio-gemtek.c @@ -0,0 +1,343 @@ +/* + * GemTek radio card driver + * + * Copyright 1998 Jonas Munsin <jmunsin@iki.fi> + * + * GemTek hasn't released any specs on the card, so the protocol had to + * be reverse engineered with dosemu. + * + * Besides the protocol changes, this is mostly a copy of: + * + * RadioTrack II driver for Linux radio support (C) 1998 Ben Pfaff + * + * Based on RadioTrack I/RadioReveal (C) 1997 M. Kirkwood + * Converted to new API by Alan Cox <alan@lxorguk.ukuu.org.uk> + * Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org> + * + * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@cisco.com> + * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org> + * + * Note: this card seems to swap the left and right audio channels! + * + * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool. + */ + +#include <linux/module.h> /* Modules */ +#include <linux/init.h> /* Initdata */ +#include <linux/ioport.h> /* request_region */ +#include <linux/delay.h> /* udelay */ +#include <linux/videodev2.h> /* kernel radio structs */ +#include <linux/mutex.h> +#include <linux/io.h> /* outb, outb_p */ +#include <linux/pnp.h> +#include <linux/slab.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-device.h> +#include "radio-isa.h" + +/* + * Module info. + */ + +MODULE_AUTHOR("Jonas Munsin, Pekka Seppänen <pexu@kapsi.fi>"); +MODULE_DESCRIPTION("A driver for the GemTek Radio card."); +MODULE_LICENSE("GPL"); +MODULE_VERSION("1.0.0"); + +/* + * Module params. + */ + +#ifndef CPTCFG_RADIO_GEMTEK_PORT +#define CPTCFG_RADIO_GEMTEK_PORT -1 +#endif +#ifndef CPTCFG_RADIO_GEMTEK_PROBE +#define CPTCFG_RADIO_GEMTEK_PROBE 1 +#endif + +#define GEMTEK_MAX 4 + +static bool probe = CPTCFG_RADIO_GEMTEK_PROBE; +static bool hardmute; +static int io[GEMTEK_MAX] = { [0] = CPTCFG_RADIO_GEMTEK_PORT, + [1 ... (GEMTEK_MAX - 1)] = -1 }; +static int radio_nr[GEMTEK_MAX] = { [0 ... (GEMTEK_MAX - 1)] = -1 }; + +module_param(probe, bool, 0444); +MODULE_PARM_DESC(probe, "Enable automatic device probing."); + +module_param(hardmute, bool, 0644); +MODULE_PARM_DESC(hardmute, "Enable 'hard muting' by shutting down PLL, may " + "reduce static noise."); + +module_param_array(io, int, NULL, 0444); +MODULE_PARM_DESC(io, "Force I/O ports for the GemTek Radio card if automatic " + "probing is disabled or fails. The most common I/O ports are: 0x20c " + "0x30c, 0x24c or 0x34c (0x20c, 0x248 and 0x28c have been reported to " + "work for the combined sound/radiocard)."); + +module_param_array(radio_nr, int, NULL, 0444); +MODULE_PARM_DESC(radio_nr, "Radio device numbers"); + +/* + * Frequency calculation constants. Intermediate frequency 10.52 MHz (nominal + * value 10.7 MHz), reference divisor 6.39 kHz (nominal 6.25 kHz). + */ +#define FSCALE 8 +#define IF_OFFSET ((unsigned int)(10.52 * 16000 * (1<<FSCALE))) +#define REF_FREQ ((unsigned int)(6.39 * 16 * (1<<FSCALE))) + +#define GEMTEK_CK 0x01 /* Clock signal */ +#define GEMTEK_DA 0x02 /* Serial data */ +#define GEMTEK_CE 0x04 /* Chip enable */ +#define GEMTEK_NS 0x08 /* No signal */ +#define GEMTEK_MT 0x10 /* Line mute */ +#define GEMTEK_STDF_3_125_KHZ 0x01 /* Standard frequency 3.125 kHz */ +#define GEMTEK_PLL_OFF 0x07 /* PLL off */ + +#define BU2614_BUS_SIZE 32 /* BU2614 / BU2614FS bus size */ + +#define SHORT_DELAY 5 /* usec */ +#define LONG_DELAY 75 /* usec */ + +struct gemtek { + struct radio_isa_card isa; + bool muted; + u32 bu2614data; +}; + +#define BU2614_FREQ_BITS 16 /* D0..D15, Frequency data */ +#define BU2614_PORT_BITS 3 /* P0..P2, Output port control data */ +#define BU2614_VOID_BITS 4 /* unused */ +#define BU2614_FMES_BITS 1 /* CT, Frequency measurement beginning data */ +#define BU2614_STDF_BITS 3 /* R0..R2, Standard frequency data */ +#define BU2614_SWIN_BITS 1 /* S, Switch between FMIN / AMIN */ +#define BU2614_SWAL_BITS 1 /* PS, Swallow counter division (AMIN only)*/ +#define BU2614_VOID2_BITS 1 /* unused */ +#define BU2614_FMUN_BITS 1 /* GT, Frequency measurement time & unlock */ +#define BU2614_TEST_BITS 1 /* TS, Test data is input */ + +#define BU2614_FREQ_SHIFT 0 +#define BU2614_PORT_SHIFT (BU2614_FREQ_BITS + BU2614_FREQ_SHIFT) +#define BU2614_VOID_SHIFT (BU2614_PORT_BITS + BU2614_PORT_SHIFT) +#define BU2614_FMES_SHIFT (BU2614_VOID_BITS + BU2614_VOID_SHIFT) +#define BU2614_STDF_SHIFT (BU2614_FMES_BITS + BU2614_FMES_SHIFT) +#define BU2614_SWIN_SHIFT (BU2614_STDF_BITS + BU2614_STDF_SHIFT) +#define BU2614_SWAL_SHIFT (BU2614_SWIN_BITS + BU2614_SWIN_SHIFT) +#define BU2614_VOID2_SHIFT (BU2614_SWAL_BITS + BU2614_SWAL_SHIFT) +#define BU2614_FMUN_SHIFT (BU2614_VOID2_BITS + BU2614_VOID2_SHIFT) +#define BU2614_TEST_SHIFT (BU2614_FMUN_BITS + BU2614_FMUN_SHIFT) + +#define MKMASK(field) (((1<<BU2614_##field##_BITS) - 1) << \ + BU2614_##field##_SHIFT) +#define BU2614_PORT_MASK MKMASK(PORT) +#define BU2614_FREQ_MASK MKMASK(FREQ) +#define BU2614_VOID_MASK MKMASK(VOID) +#define BU2614_FMES_MASK MKMASK(FMES) +#define BU2614_STDF_MASK MKMASK(STDF) +#define BU2614_SWIN_MASK MKMASK(SWIN) +#define BU2614_SWAL_MASK MKMASK(SWAL) +#define BU2614_VOID2_MASK MKMASK(VOID2) +#define BU2614_FMUN_MASK MKMASK(FMUN) +#define BU2614_TEST_MASK MKMASK(TEST) + +/* + * Set data which will be sent to BU2614FS. + */ +#define gemtek_bu2614_set(dev, field, data) ((dev)->bu2614data = \ + ((dev)->bu2614data & ~field##_MASK) | ((data) << field##_SHIFT)) + +/* + * Transmit settings to BU2614FS over GemTek IC. + */ +static void gemtek_bu2614_transmit(struct gemtek *gt) +{ + struct radio_isa_card *isa = >->isa; + int i, bit, q, mute; + + mute = gt->muted ? GEMTEK_MT : 0x00; + + outb_p(mute | GEMTEK_CE | GEMTEK_DA | GEMTEK_CK, isa->io); + udelay(LONG_DELAY); + + for (i = 0, q = gt->bu2614data; i < 32; i++, q >>= 1) { + bit = (q & 1) ? GEMTEK_DA : 0; + outb_p(mute | GEMTEK_CE | bit, isa->io); + udelay(SHORT_DELAY); + outb_p(mute | GEMTEK_CE | bit | GEMTEK_CK, isa->io); + udelay(SHORT_DELAY); + } + + outb_p(mute | GEMTEK_DA | GEMTEK_CK, isa->io); + udelay(SHORT_DELAY); +} + +/* + * Calculate divisor from FM-frequency for BU2614FS (3.125 KHz STDF expected). + */ +static unsigned long gemtek_convfreq(unsigned long freq) +{ + return ((freq << FSCALE) + IF_OFFSET + REF_FREQ / 2) / REF_FREQ; +} + +static struct radio_isa_card *gemtek_alloc(void) +{ + struct gemtek *gt = kzalloc(sizeof(*gt), GFP_KERNEL); + + if (gt) + gt->muted = true; + return gt ? >->isa : NULL; +} + +/* + * Set FM-frequency. + */ +static int gemtek_s_frequency(struct radio_isa_card *isa, u32 freq) +{ + struct gemtek *gt = container_of(isa, struct gemtek, isa); + + if (hardmute && gt->muted) + return 0; + + gemtek_bu2614_set(gt, BU2614_PORT, 0); + gemtek_bu2614_set(gt, BU2614_FMES, 0); + gemtek_bu2614_set(gt, BU2614_SWIN, 0); /* FM-mode */ + gemtek_bu2614_set(gt, BU2614_SWAL, 0); + gemtek_bu2614_set(gt, BU2614_FMUN, 1); /* GT bit set */ + gemtek_bu2614_set(gt, BU2614_TEST, 0); + gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_STDF_3_125_KHZ); + gemtek_bu2614_set(gt, BU2614_FREQ, gemtek_convfreq(freq)); + gemtek_bu2614_transmit(gt); + return 0; +} + +/* + * Set mute flag. + */ +static int gemtek_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol) +{ + struct gemtek *gt = container_of(isa, struct gemtek, isa); + int i; + + gt->muted = mute; + if (hardmute) { + if (!mute) + return gemtek_s_frequency(isa, isa->freq); + + /* Turn off PLL, disable data output */ + gemtek_bu2614_set(gt, BU2614_PORT, 0); + gemtek_bu2614_set(gt, BU2614_FMES, 0); /* CT bit off */ + gemtek_bu2614_set(gt, BU2614_SWIN, 0); /* FM-mode */ + gemtek_bu2614_set(gt, BU2614_SWAL, 0); + gemtek_bu2614_set(gt, BU2614_FMUN, 0); /* GT bit off */ + gemtek_bu2614_set(gt, BU2614_TEST, 0); + gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_PLL_OFF); + gemtek_bu2614_set(gt, BU2614_FREQ, 0); + gemtek_bu2614_transmit(gt); + return 0; + } + + /* Read bus contents (CE, CK and DA). */ + i = inb_p(isa->io); + /* Write it back with mute flag set. */ + outb_p((i >> 5) | (mute ? GEMTEK_MT : 0), isa->io); + udelay(SHORT_DELAY); + return 0; +} + +static u32 gemtek_g_rxsubchans(struct radio_isa_card *isa) +{ + if (inb_p(isa->io) & GEMTEK_NS) + return V4L2_TUNER_SUB_MONO; + return V4L2_TUNER_SUB_STEREO; +} + +/* + * Check if requested card acts like GemTek Radio card. + */ +static bool gemtek_probe(struct radio_isa_card *isa, int io) +{ + int i, q; + + q = inb_p(io); /* Read bus contents before probing. */ + /* Try to turn on CE, CK and DA respectively and check if card responds + properly. */ + for (i = 0; i < 3; ++i) { + outb_p(1 << i, io); + udelay(SHORT_DELAY); + + if ((inb_p(io) & ~GEMTEK_NS) != (0x17 | (1 << (i + 5)))) + return false; + } + outb_p(q >> 5, io); /* Write bus contents back. */ + udelay(SHORT_DELAY); + return true; +} + +static const struct radio_isa_ops gemtek_ops = { + .alloc = gemtek_alloc, + .probe = gemtek_probe, + .s_mute_volume = gemtek_s_mute_volume, + .s_frequency = gemtek_s_frequency, + .g_rxsubchans = gemtek_g_rxsubchans, +}; + +static const int gemtek_ioports[] = { 0x20c, 0x30c, 0x24c, 0x34c, 0x248, 0x28c }; + +#ifdef CONFIG_PNP +static struct pnp_device_id gemtek_pnp_devices[] = { + /* AOpen FX-3D/Pro Radio */ + {.id = "ADS7183", .driver_data = 0}, + {.id = ""} +}; + +MODULE_DEVICE_TABLE(pnp, gemtek_pnp_devices); +#endif + +static struct radio_isa_driver gemtek_driver = { + .driver = { + .match = radio_isa_match, + .probe = radio_isa_probe, + .remove = radio_isa_remove, + .driver = { + .name = "radio-gemtek", + }, + }, +#ifdef CONFIG_PNP + .pnp_driver = { + .name = "radio-gemtek", + .id_table = gemtek_pnp_devices, + .probe = radio_isa_pnp_probe, + .remove = radio_isa_pnp_remove, + }, +#endif + .io_params = io, + .radio_nr_params = radio_nr, + .io_ports = gemtek_ioports, + .num_of_io_ports = ARRAY_SIZE(gemtek_ioports), + .region_size = 1, + .card = "GemTek Radio", + .ops = &gemtek_ops, + .has_stereo = true, +}; + +static int __init gemtek_init(void) +{ + gemtek_driver.probe = probe; +#ifdef CONFIG_PNP + pnp_register_driver(&gemtek_driver.pnp_driver); +#endif + return isa_register_driver(&gemtek_driver.driver, GEMTEK_MAX); +} + +static void __exit gemtek_exit(void) +{ + hardmute = 1; /* Turn off PLL */ +#ifdef CONFIG_PNP + pnp_unregister_driver(&gemtek_driver.pnp_driver); +#endif + isa_unregister_driver(&gemtek_driver.driver); +} + +module_init(gemtek_init); +module_exit(gemtek_exit); |