diff options
Diffstat (limited to 'drivers/media/pci/cx88/cx88-dvb.c')
| -rw-r--r-- | drivers/media/pci/cx88/cx88-dvb.c | 1795 |
1 files changed, 1795 insertions, 0 deletions
diff --git a/drivers/media/pci/cx88/cx88-dvb.c b/drivers/media/pci/cx88/cx88-dvb.c new file mode 100644 index 0000000..4f3c001 --- /dev/null +++ b/drivers/media/pci/cx88/cx88-dvb.c @@ -0,0 +1,1795 @@ +/* + * + * device driver for Conexant 2388x based TV cards + * MPEG Transport Stream (DVB) routines + * + * (c) 2004, 2005 Chris Pascoe <c.pascoe@itee.uq.edu.au> + * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs] + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/fs.h> +#include <linux/kthread.h> +#include <linux/file.h> +#include <linux/suspend.h> + +#include "cx88.h" +#include "dvb-pll.h" +#include <media/v4l2-common.h> + +#include "mt352.h" +#include "mt352_priv.h" +#include "cx88-vp3054-i2c.h" +#include "zl10353.h" +#include "cx22702.h" +#include "or51132.h" +#include "lgdt330x.h" +#include "s5h1409.h" +#include "xc4000.h" +#include "xc5000.h" +#include "nxt200x.h" +#include "cx24123.h" +#include "isl6421.h" +#include "tuner-simple.h" +#include "tda9887.h" +#include "s5h1411.h" +#include "stv0299.h" +#include "z0194a.h" +#include "stv0288.h" +#include "stb6000.h" +#include "cx24116.h" +#include "stv0900.h" +#include "stb6100.h" +#include "stb6100_proc.h" +#include "mb86a16.h" +#include "ts2020.h" +#include "ds3000.h" + +MODULE_DESCRIPTION("driver for cx2388x based DVB cards"); +MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>"); +MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(CX88_VERSION); + +static unsigned int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug,"enable debug messages [dvb]"); + +static unsigned int dvb_buf_tscnt = 32; +module_param(dvb_buf_tscnt, int, 0644); +MODULE_PARM_DESC(dvb_buf_tscnt, "DVB Buffer TS count [dvb]"); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +#define dprintk(level,fmt, arg...) if (debug >= level) \ + printk(KERN_DEBUG "%s/2-dvb: " fmt, core->name, ## arg) + +/* ------------------------------------------------------------------ */ + +static int dvb_buf_setup(struct videobuf_queue *q, + unsigned int *count, unsigned int *size) +{ + struct cx8802_dev *dev = q->priv_data; + + dev->ts_packet_size = 188 * 4; + dev->ts_packet_count = dvb_buf_tscnt; + + *size = dev->ts_packet_size * dev->ts_packet_count; + *count = dvb_buf_tscnt; + return 0; +} + +static int dvb_buf_prepare(struct videobuf_queue *q, + struct videobuf_buffer *vb, enum v4l2_field field) +{ + struct cx8802_dev *dev = q->priv_data; + return cx8802_buf_prepare(q, dev, (struct cx88_buffer*)vb,field); +} + +static void dvb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + struct cx8802_dev *dev = q->priv_data; + cx8802_buf_queue(dev, (struct cx88_buffer*)vb); +} + +static void dvb_buf_release(struct videobuf_queue *q, + struct videobuf_buffer *vb) +{ + cx88_free_buffer(q, (struct cx88_buffer*)vb); +} + +static const struct videobuf_queue_ops dvb_qops = { + .buf_setup = dvb_buf_setup, + .buf_prepare = dvb_buf_prepare, + .buf_queue = dvb_buf_queue, + .buf_release = dvb_buf_release, +}; + +/* ------------------------------------------------------------------ */ + +static int cx88_dvb_bus_ctrl(struct dvb_frontend* fe, int acquire) +{ + struct cx8802_dev *dev= fe->dvb->priv; + struct cx8802_driver *drv = NULL; + int ret = 0; + int fe_id; + + fe_id = videobuf_dvb_find_frontend(&dev->frontends, fe); + if (!fe_id) { + printk(KERN_ERR "%s() No frontend found\n", __func__); + return -EINVAL; + } + + mutex_lock(&dev->core->lock); + drv = cx8802_get_driver(dev, CX88_MPEG_DVB); + if (drv) { + if (acquire){ + dev->frontends.active_fe_id = fe_id; + ret = drv->request_acquire(drv); + } else { + ret = drv->request_release(drv); + dev->frontends.active_fe_id = 0; + } + } + mutex_unlock(&dev->core->lock); + + return ret; +} + +static void cx88_dvb_gate_ctrl(struct cx88_core *core, int open) +{ + struct videobuf_dvb_frontends *f; + struct videobuf_dvb_frontend *fe; + + if (!core->dvbdev) + return; + + f = &core->dvbdev->frontends; + + if (!f) + return; + + if (f->gate <= 1) /* undefined or fe0 */ + fe = videobuf_dvb_get_frontend(f, 1); + else + fe = videobuf_dvb_get_frontend(f, f->gate); + + if (fe && fe->dvb.frontend && fe->dvb.frontend->ops.i2c_gate_ctrl) + fe->dvb.frontend->ops.i2c_gate_ctrl(fe->dvb.frontend, open); +} + +/* ------------------------------------------------------------------ */ + +static int dvico_fusionhdtv_demod_init(struct dvb_frontend* fe) +{ + static const u8 clock_config [] = { CLOCK_CTL, 0x38, 0x39 }; + static const u8 reset [] = { RESET, 0x80 }; + static const u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; + static const u8 agc_cfg [] = { AGC_TARGET, 0x24, 0x20 }; + static const u8 gpp_ctl_cfg [] = { GPP_CTL, 0x33 }; + static const u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; + + mt352_write(fe, clock_config, sizeof(clock_config)); + udelay(200); + mt352_write(fe, reset, sizeof(reset)); + mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); + + mt352_write(fe, agc_cfg, sizeof(agc_cfg)); + mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); + mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); + return 0; +} + +static int dvico_dual_demod_init(struct dvb_frontend *fe) +{ + static const u8 clock_config [] = { CLOCK_CTL, 0x38, 0x38 }; + static const u8 reset [] = { RESET, 0x80 }; + static const u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; + static const u8 agc_cfg [] = { AGC_TARGET, 0x28, 0x20 }; + static const u8 gpp_ctl_cfg [] = { GPP_CTL, 0x33 }; + static const u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; + + mt352_write(fe, clock_config, sizeof(clock_config)); + udelay(200); + mt352_write(fe, reset, sizeof(reset)); + mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); + + mt352_write(fe, agc_cfg, sizeof(agc_cfg)); + mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); + mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); + + return 0; +} + +static int dntv_live_dvbt_demod_init(struct dvb_frontend* fe) +{ + static const u8 clock_config [] = { 0x89, 0x38, 0x39 }; + static const u8 reset [] = { 0x50, 0x80 }; + static const u8 adc_ctl_1_cfg [] = { 0x8E, 0x40 }; + static const u8 agc_cfg [] = { 0x67, 0x10, 0x23, 0x00, 0xFF, 0xFF, + 0x00, 0xFF, 0x00, 0x40, 0x40 }; + static const u8 dntv_extra[] = { 0xB5, 0x7A }; + static const u8 capt_range_cfg[] = { 0x75, 0x32 }; + + mt352_write(fe, clock_config, sizeof(clock_config)); + udelay(2000); + mt352_write(fe, reset, sizeof(reset)); + mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); + + mt352_write(fe, agc_cfg, sizeof(agc_cfg)); + udelay(2000); + mt352_write(fe, dntv_extra, sizeof(dntv_extra)); + mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); + + return 0; +} + +static const struct mt352_config dvico_fusionhdtv = { + .demod_address = 0x0f, + .demod_init = dvico_fusionhdtv_demod_init, +}; + +static const struct mt352_config dntv_live_dvbt_config = { + .demod_address = 0x0f, + .demod_init = dntv_live_dvbt_demod_init, +}; + +static const struct mt352_config dvico_fusionhdtv_dual = { + .demod_address = 0x0f, + .demod_init = dvico_dual_demod_init, +}; + +static const struct zl10353_config cx88_terratec_cinergy_ht_pci_mkii_config = { + .demod_address = (0x1e >> 1), + .no_tuner = 1, + .if2 = 45600, +}; + +static struct mb86a16_config twinhan_vp1027 = { + .demod_address = 0x08, +}; + +#if IS_ENABLED(CPTCFG_VIDEO_CX88_VP3054) +static int dntv_live_dvbt_pro_demod_init(struct dvb_frontend* fe) +{ + static const u8 clock_config [] = { 0x89, 0x38, 0x38 }; + static const u8 reset [] = { 0x50, 0x80 }; + static const u8 adc_ctl_1_cfg [] = { 0x8E, 0x40 }; + static const u8 agc_cfg [] = { 0x67, 0x10, 0x20, 0x00, 0xFF, 0xFF, + 0x00, 0xFF, 0x00, 0x40, 0x40 }; + static const u8 dntv_extra[] = { 0xB5, 0x7A }; + static const u8 capt_range_cfg[] = { 0x75, 0x32 }; + + mt352_write(fe, clock_config, sizeof(clock_config)); + udelay(2000); + mt352_write(fe, reset, sizeof(reset)); + mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); + + mt352_write(fe, agc_cfg, sizeof(agc_cfg)); + udelay(2000); + mt352_write(fe, dntv_extra, sizeof(dntv_extra)); + mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); + + return 0; +} + +static const struct mt352_config dntv_live_dvbt_pro_config = { + .demod_address = 0x0f, + .no_tuner = 1, + .demod_init = dntv_live_dvbt_pro_demod_init, +}; +#endif + +static const struct zl10353_config dvico_fusionhdtv_hybrid = { + .demod_address = 0x0f, + .no_tuner = 1, +}; + +static const struct zl10353_config dvico_fusionhdtv_xc3028 = { + .demod_address = 0x0f, + .if2 = 45600, + .no_tuner = 1, +}; + +static const struct mt352_config dvico_fusionhdtv_mt352_xc3028 = { + .demod_address = 0x0f, + .if2 = 4560, + .no_tuner = 1, + .demod_init = dvico_fusionhdtv_demod_init, +}; + +static const struct zl10353_config dvico_fusionhdtv_plus_v1_1 = { + .demod_address = 0x0f, +}; + +static const struct cx22702_config connexant_refboard_config = { + .demod_address = 0x43, + .output_mode = CX22702_SERIAL_OUTPUT, +}; + +static const struct cx22702_config hauppauge_hvr_config = { + .demod_address = 0x63, + .output_mode = CX22702_SERIAL_OUTPUT, +}; + +static int or51132_set_ts_param(struct dvb_frontend* fe, int is_punctured) +{ + struct cx8802_dev *dev= fe->dvb->priv; + dev->ts_gen_cntrl = is_punctured ? 0x04 : 0x00; + return 0; +} + +static const struct or51132_config pchdtv_hd3000 = { + .demod_address = 0x15, + .set_ts_params = or51132_set_ts_param, +}; + +static int lgdt330x_pll_rf_set(struct dvb_frontend* fe, int index) +{ + struct cx8802_dev *dev= fe->dvb->priv; + struct cx88_core *core = dev->core; + + dprintk(1, "%s: index = %d\n", __func__, index); + if (index == 0) + cx_clear(MO_GP0_IO, 8); + else + cx_set(MO_GP0_IO, 8); + return 0; +} + +static int lgdt330x_set_ts_param(struct dvb_frontend* fe, int is_punctured) +{ + struct cx8802_dev *dev= fe->dvb->priv; + if (is_punctured) + dev->ts_gen_cntrl |= 0x04; + else + dev->ts_gen_cntrl &= ~0x04; + return 0; +} + +static struct lgdt330x_config fusionhdtv_3_gold = { + .demod_address = 0x0e, + .demod_chip = LGDT3302, + .serial_mpeg = 0x04, /* TPSERIAL for 3302 in TOP_CONTROL */ + .set_ts_params = lgdt330x_set_ts_param, +}; + +static const struct lgdt330x_config fusionhdtv_5_gold = { + .demod_address = 0x0e, + .demod_chip = LGDT3303, + .serial_mpeg = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */ + .set_ts_params = lgdt330x_set_ts_param, +}; + +static const struct lgdt330x_config pchdtv_hd5500 = { + .demod_address = 0x59, + .demod_chip = LGDT3303, + .serial_mpeg = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */ + .set_ts_params = lgdt330x_set_ts_param, +}; + +static int nxt200x_set_ts_param(struct dvb_frontend* fe, int is_punctured) +{ + struct cx8802_dev *dev= fe->dvb->priv; + dev->ts_gen_cntrl = is_punctured ? 0x04 : 0x00; + return 0; +} + +static const struct nxt200x_config ati_hdtvwonder = { + .demod_address = 0x0a, + .set_ts_params = nxt200x_set_ts_param, +}; + +static int cx24123_set_ts_param(struct dvb_frontend* fe, + int is_punctured) +{ + struct cx8802_dev *dev= fe->dvb->priv; + dev->ts_gen_cntrl = 0x02; + return 0; +} + +static int kworld_dvbs_100_set_voltage(struct dvb_frontend* fe, + fe_sec_voltage_t voltage) +{ + struct cx8802_dev *dev= fe->dvb->priv; + struct cx88_core *core = dev->core; + + if (voltage == SEC_VOLTAGE_OFF) + cx_write(MO_GP0_IO, 0x000006fb); + else + cx_write(MO_GP0_IO, 0x000006f9); + + if (core->prev_set_voltage) + return core->prev_set_voltage(fe, voltage); + return 0; +} + +static int geniatech_dvbs_set_voltage(struct dvb_frontend *fe, + fe_sec_voltage_t voltage) +{ + struct cx8802_dev *dev= fe->dvb->priv; + struct cx88_core *core = dev->core; + + if (voltage == SEC_VOLTAGE_OFF) { + dprintk(1,"LNB Voltage OFF\n"); + cx_write(MO_GP0_IO, 0x0000efff); + } + + if (core->prev_set_voltage) + return core->prev_set_voltage(fe, voltage); + return 0; +} + +static int tevii_dvbs_set_voltage(struct dvb_frontend *fe, + fe_sec_voltage_t voltage) +{ + struct cx8802_dev *dev= fe->dvb->priv; + struct cx88_core *core = dev->core; + + cx_set(MO_GP0_IO, 0x6040); + switch (voltage) { + case SEC_VOLTAGE_13: + cx_clear(MO_GP0_IO, 0x20); + break; + case SEC_VOLTAGE_18: + cx_set(MO_GP0_IO, 0x20); + break; + case SEC_VOLTAGE_OFF: + cx_clear(MO_GP0_IO, 0x20); + break; + } + + if (core->prev_set_voltage) + return core->prev_set_voltage(fe, voltage); + return 0; +} + +static int vp1027_set_voltage(struct dvb_frontend *fe, + fe_sec_voltage_t voltage) +{ + struct cx8802_dev *dev = fe->dvb->priv; + struct cx88_core *core = dev->core; + + switch (voltage) { + case SEC_VOLTAGE_13: + dprintk(1, "LNB SEC Voltage=13\n"); + cx_write(MO_GP0_IO, 0x00001220); + break; + case SEC_VOLTAGE_18: + dprintk(1, "LNB SEC Voltage=18\n"); + cx_write(MO_GP0_IO, 0x00001222); + break; + case SEC_VOLTAGE_OFF: + dprintk(1, "LNB Voltage OFF\n"); + cx_write(MO_GP0_IO, 0x00001230); + break; + } + + if (core->prev_set_voltage) + return core->prev_set_voltage(fe, voltage); + return 0; +} + +static const struct cx24123_config geniatech_dvbs_config = { + .demod_address = 0x55, + .set_ts_params = cx24123_set_ts_param, +}; + +static const struct cx24123_config hauppauge_novas_config = { + .demod_address = 0x55, + .set_ts_params = cx24123_set_ts_param, +}; + +static const struct cx24123_config kworld_dvbs_100_config = { + .demod_address = 0x15, + .set_ts_params = cx24123_set_ts_param, + .lnb_polarity = 1, +}; + +static const struct s5h1409_config pinnacle_pctv_hd_800i_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_PARALLEL_OUTPUT, + .gpio = S5H1409_GPIO_ON, + .qam_if = 44000, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK, +}; + +static const struct s5h1409_config dvico_hdtv5_pci_nano_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_SERIAL_OUTPUT, + .gpio = S5H1409_GPIO_OFF, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static const struct s5h1409_config kworld_atsc_120_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_SERIAL_OUTPUT, + .gpio = S5H1409_GPIO_OFF, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static const struct xc5000_config pinnacle_pctv_hd_800i_tuner_config = { + .i2c_address = 0x64, + .if_khz = 5380, +}; + +static const struct zl10353_config cx88_pinnacle_hybrid_pctv = { + .demod_address = (0x1e >> 1), + .no_tuner = 1, + .if2 = 45600, +}; + +static const struct zl10353_config cx88_geniatech_x8000_mt = { + .demod_address = (0x1e >> 1), + .no_tuner = 1, + .disable_i2c_gate_ctrl = 1, +}; + +static const struct s5h1411_config dvico_fusionhdtv7_config = { + .output_mode = S5H1411_SERIAL_OUTPUT, + .gpio = S5H1411_GPIO_ON, + .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, + .qam_if = S5H1411_IF_44000, + .vsb_if = S5H1411_IF_44000, + .inversion = S5H1411_INVERSION_OFF, + .status_mode = S5H1411_DEMODLOCKING +}; + +static const struct xc5000_config dvico_fusionhdtv7_tuner_config = { + .i2c_address = 0xc2 >> 1, + .if_khz = 5380, +}; + +static int attach_xc3028(u8 addr, struct cx8802_dev *dev) +{ + struct dvb_frontend *fe; + struct videobuf_dvb_frontend *fe0 = NULL; + struct xc2028_ctrl ctl; + struct xc2028_config cfg = { + .i2c_adap = &dev->core->i2c_adap, + .i2c_addr = addr, + .ctrl = &ctl, + }; + + /* Get the first frontend */ + fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); + if (!fe0) + return -EINVAL; + + if (!fe0->dvb.frontend) { + printk(KERN_ERR "%s/2: dvb frontend not attached. " + "Can't attach xc3028\n", + dev->core->name); + return -EINVAL; + } + + /* + * Some xc3028 devices may be hidden by an I2C gate. This is known + * to happen with some s5h1409-based devices. + * Now that I2C gate is open, sets up xc3028 configuration + */ + cx88_setup_xc3028(dev->core, &ctl); + + fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg); + if (!fe) { + printk(KERN_ERR "%s/2: xc3028 attach failed\n", + dev->core->name); + dvb_frontend_detach(fe0->dvb.frontend); + dvb_unregister_frontend(fe0->dvb.frontend); + fe0->dvb.frontend = NULL; + return -EINVAL; + } + + printk(KERN_INFO "%s/2: xc3028 attached\n", + dev->core->name); + + return 0; +} + +static int attach_xc4000(struct cx8802_dev *dev, struct xc4000_config *cfg) +{ + struct dvb_frontend *fe; + struct videobuf_dvb_frontend *fe0 = NULL; + + /* Get the first frontend */ + fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); + if (!fe0) + return -EINVAL; + + if (!fe0->dvb.frontend) { + printk(KERN_ERR "%s/2: dvb frontend not attached. " + "Can't attach xc4000\n", + dev->core->name); + return -EINVAL; + } + + fe = dvb_attach(xc4000_attach, fe0->dvb.frontend, &dev->core->i2c_adap, + cfg); + if (!fe) { + printk(KERN_ERR "%s/2: xc4000 attach failed\n", + dev->core->name); + dvb_frontend_detach(fe0->dvb.frontend); + dvb_unregister_frontend(fe0->dvb.frontend); + fe0->dvb.frontend = NULL; + return -EINVAL; + } + + printk(KERN_INFO "%s/2: xc4000 attached\n", dev->core->name); + + return 0; +} + +static int cx24116_set_ts_param(struct dvb_frontend *fe, + int is_punctured) +{ + struct cx8802_dev *dev = fe->dvb->priv; + dev->ts_gen_cntrl = 0x2; + + return 0; +} + +static int stv0900_set_ts_param(struct dvb_frontend *fe, + int is_punctured) +{ + struct cx8802_dev *dev = fe->dvb->priv; + dev->ts_gen_cntrl = 0; + + return 0; +} + +static int cx24116_reset_device(struct dvb_frontend *fe) +{ + struct cx8802_dev *dev = fe->dvb->priv; + struct cx88_core *core = dev->core; + + /* Reset the part */ + /* Put the cx24116 into reset */ + cx_write(MO_SRST_IO, 0); + msleep(10); + /* Take the cx24116 out of reset */ + cx_write(MO_SRST_IO, 1); + msleep(10); + + return 0; +} + +static const struct cx24116_config hauppauge_hvr4000_config = { + .demod_address = 0x05, + .set_ts_params = cx24116_set_ts_param, + .reset_device = cx24116_reset_device, +}; + +static const struct cx24116_config tevii_s460_config = { + .demod_address = 0x55, + .set_ts_params = cx24116_set_ts_param, + .reset_device = cx24116_reset_device, +}; + +static int ds3000_set_ts_param(struct dvb_frontend *fe, + int is_punctured) +{ + struct cx8802_dev *dev = fe->dvb->priv; + dev->ts_gen_cntrl = 4; + + return 0; +} + +static struct ds3000_config tevii_ds3000_config = { + .demod_address = 0x68, + .set_ts_params = ds3000_set_ts_param, +}; + +static struct ts2020_config tevii_ts2020_config = { + .tuner_address = 0x60, + .clk_out_div = 1, +}; + +static const struct stv0900_config prof_7301_stv0900_config = { + .demod_address = 0x6a, +/* demod_mode = 0,*/ + .xtal = 27000000, + .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */ + .diseqc_mode = 2,/* 2/3 PWM */ + .tun1_maddress = 0,/* 0x60 */ + .tun1_adc = 0,/* 2 Vpp */ + .path1_mode = 3, + .set_ts_params = stv0900_set_ts_param, +}; + +static const struct stb6100_config prof_7301_stb6100_config = { + .tuner_address = 0x60, + .refclock = 27000000, +}; + +static const struct stv0299_config tevii_tuner_sharp_config = { + .demod_address = 0x68, + .inittab = sharp_z0194a_inittab, + .mclk = 88000000UL, + .invert = 1, + .skip_reinit = 0, + .lock_output = 1, + .volt13_op0_op1 = STV0299_VOLT13_OP1, + .min_delay_ms = 100, + .set_symbol_rate = sharp_z0194a_set_symbol_rate, + .set_ts_params = cx24116_set_ts_param, +}; + +static const struct stv0288_config tevii_tuner_earda_config = { + .demod_address = 0x68, + .min_delay_ms = 100, + .set_ts_params = cx24116_set_ts_param, +}; + +static int cx8802_alloc_frontends(struct cx8802_dev *dev) +{ + struct cx88_core *core = dev->core; + struct videobuf_dvb_frontend *fe = NULL; + int i; + + mutex_init(&dev->frontends.lock); + INIT_LIST_HEAD(&dev->frontends.felist); + + if (!core->board.num_frontends) + return -ENODEV; + + printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, + core->board.num_frontends); + for (i = 1; i <= core->board.num_frontends; i++) { + fe = videobuf_dvb_alloc_frontend(&dev->frontends, i); + if (!fe) { + printk(KERN_ERR "%s() failed to alloc\n", __func__); + videobuf_dvb_dealloc_frontends(&dev->frontends); + return -ENOMEM; + } + } + return 0; +} + + + +static const u8 samsung_smt_7020_inittab[] = { + 0x01, 0x15, + 0x02, 0x00, + 0x03, 0x00, + 0x04, 0x7D, + 0x05, 0x0F, + 0x06, 0x02, + 0x07, 0x00, + 0x08, 0x60, + + 0x0A, 0xC2, + 0x0B, 0x00, + 0x0C, 0x01, + 0x0D, 0x81, + 0x0E, 0x44, + 0x0F, 0x09, + 0x10, 0x3C, + 0x11, 0x84, + 0x12, 0xDA, + 0x13, 0x99, + 0x14, 0x8D, + 0x15, 0xCE, + 0x16, 0xE8, + 0x17, 0x43, + 0x18, 0x1C, + 0x19, 0x1B, + 0x1A, 0x1D, + + 0x1C, 0x12, + 0x1D, 0x00, + 0x1E, 0x00, + 0x1F, 0x00, + 0x20, 0x00, + 0x21, 0x00, + 0x22, 0x00, + 0x23, 0x00, + + 0x28, 0x02, + 0x29, 0x28, + 0x2A, 0x14, + 0x2B, 0x0F, + 0x2C, 0x09, + 0x2D, 0x05, + + 0x31, 0x1F, + 0x32, 0x19, + 0x33, 0xFC, + 0x34, 0x13, + 0xff, 0xff, +}; + + +static int samsung_smt_7020_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct cx8802_dev *dev = fe->dvb->priv; + u8 buf[4]; + u32 div; + struct i2c_msg msg = { + .addr = 0x61, + .flags = 0, + .buf = buf, + .len = sizeof(buf) }; + + div = c->frequency / 125; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0x84; /* 0xC4 */ + buf[3] = 0x00; + + if (c->frequency < 1500000) + buf[3] |= 0x10; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(&dev->core->i2c_adap, &msg, 1) != 1) + return -EIO; + + return 0; +} + +static int samsung_smt_7020_set_tone(struct dvb_frontend *fe, + fe_sec_tone_mode_t tone) +{ + struct cx8802_dev *dev = fe->dvb->priv; + struct cx88_core *core = dev->core; + + cx_set(MO_GP0_IO, 0x0800); + + switch (tone) { + case SEC_TONE_ON: + cx_set(MO_GP0_IO, 0x08); + break; + case SEC_TONE_OFF: + cx_clear(MO_GP0_IO, 0x08); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int samsung_smt_7020_set_voltage(struct dvb_frontend *fe, + fe_sec_voltage_t voltage) +{ + struct cx8802_dev *dev = fe->dvb->priv; + struct cx88_core *core = dev->core; + + u8 data; + struct i2c_msg msg = { + .addr = 8, + .flags = 0, + .buf = &data, + .len = sizeof(data) }; + + cx_set(MO_GP0_IO, 0x8000); + + switch (voltage) { + case SEC_VOLTAGE_OFF: + break; + case SEC_VOLTAGE_13: + data = ISL6421_EN1 | ISL6421_LLC1; + cx_clear(MO_GP0_IO, 0x80); + break; + case SEC_VOLTAGE_18: + data = ISL6421_EN1 | ISL6421_LLC1 | ISL6421_VSEL1; + cx_clear(MO_GP0_IO, 0x80); + break; + default: + return -EINVAL; + } + + return (i2c_transfer(&dev->core->i2c_adap, &msg, 1) == 1) ? 0 : -EIO; +} + +static int samsung_smt_7020_stv0299_set_symbol_rate(struct dvb_frontend *fe, + u32 srate, u32 ratio) +{ + u8 aclk = 0; + u8 bclk = 0; + + if (srate < 1500000) { + aclk = 0xb7; + bclk = 0x47; + } else if (srate < 3000000) { + aclk = 0xb7; + bclk = 0x4b; + } else if (srate < 7000000) { + aclk = 0xb7; + bclk = 0x4f; + } else if (srate < 14000000) { + aclk = 0xb7; + bclk = 0x53; + } else if (srate < 30000000) { + aclk = 0xb6; + bclk = 0x53; + } else if (srate < 45000000) { + aclk = 0xb4; + bclk = 0x51; + } + + stv0299_writereg(fe, 0x13, aclk); + stv0299_writereg(fe, 0x14, bclk); + stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg(fe, 0x21, ratio & 0xf0); + + return 0; +} + + +static const struct stv0299_config samsung_stv0299_config = { + .demod_address = 0x68, + .inittab = samsung_smt_7020_inittab, + .mclk = 88000000UL, + .invert = 0, + .skip_reinit = 0, + .lock_output = STV0299_LOCKOUTPUT_LK, + .volt13_op0_op1 = STV0299_VOLT13_OP1, + .min_delay_ms = 100, + .set_symbol_rate = samsung_smt_7020_stv0299_set_symbol_rate, +}; + +static int dvb_register(struct cx8802_dev *dev) +{ + struct cx88_core *core = dev->core; + struct videobuf_dvb_frontend *fe0, *fe1 = NULL; + int mfe_shared = 0; /* bus not shared by default */ + int res = -EINVAL; + + if (0 != core->i2c_rc) { + printk(KERN_ERR "%s/2: no i2c-bus available, cannot attach dvb drivers\n", core->name); + goto frontend_detach; + } + + /* Get the first frontend */ + fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); + if (!fe0) + goto frontend_detach; + + /* multi-frontend gate control is undefined or defaults to fe0 */ + dev->frontends.gate = 0; + + /* Sets the gate control callback to be used by i2c command calls */ + core->gate_ctrl = cx88_dvb_gate_ctrl; + + /* init frontend(s) */ + switch (core->boardnr) { + case CX88_BOARD_HAUPPAUGE_DVB_T1: + fe0->dvb.frontend = dvb_attach(cx22702_attach, + &connexant_refboard_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, + 0x61, &core->i2c_adap, + DVB_PLL_THOMSON_DTT759X)) + goto frontend_detach; + } + break; + case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1: + case CX88_BOARD_CONEXANT_DVB_T1: + case CX88_BOARD_KWORLD_DVB_T_CX22702: + case CX88_BOARD_WINFAST_DTV1000: + fe0->dvb.frontend = dvb_attach(cx22702_attach, + &connexant_refboard_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, + 0x60, &core->i2c_adap, + DVB_PLL_THOMSON_DTT7579)) + goto frontend_detach; + } + break; + case CX88_BOARD_WINFAST_DTV2000H: + case CX88_BOARD_HAUPPAUGE_HVR1100: + case CX88_BOARD_HAUPPAUGE_HVR1100LP: + case CX88_BOARD_HAUPPAUGE_HVR1300: + fe0->dvb.frontend = dvb_attach(cx22702_attach, + &hauppauge_hvr_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_PHILIPS_FMD1216ME_MK3)) + goto frontend_detach; + } + break; + case CX88_BOARD_WINFAST_DTV2000H_J: + fe0->dvb.frontend = dvb_attach(cx22702_attach, + &hauppauge_hvr_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_PHILIPS_FMD1216MEX_MK3)) + goto frontend_detach; + } + break; + case CX88_BOARD_HAUPPAUGE_HVR3000: + /* MFE frontend 1 */ + mfe_shared = 1; + dev->frontends.gate = 2; + /* DVB-S init */ + fe0->dvb.frontend = dvb_attach(cx24123_attach, + &hauppauge_novas_config, + &dev->core->i2c_adap); + if (fe0->dvb.frontend) { + if (!dvb_attach(isl6421_attach, + fe0->dvb.frontend, + &dev->core->i2c_adap, + 0x08, ISL6421_DCL, 0x00, false)) + goto frontend_detach; + } + /* MFE frontend 2 */ + fe1 = videobuf_dvb_get_frontend(&dev->frontends, 2); + if (!fe1) + goto frontend_detach; + /* DVB-T init */ + fe1->dvb.frontend = dvb_attach(cx22702_attach, + &hauppauge_hvr_config, + &dev->core->i2c_adap); + if (fe1->dvb.frontend) { + fe1->dvb.frontend->id = 1; + if (!dvb_attach(simple_tuner_attach, + fe1->dvb.frontend, + &dev->core->i2c_adap, + 0x61, TUNER_PHILIPS_FMD1216ME_MK3)) + goto frontend_detach; + } + break; + case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS: + fe0->dvb.frontend = dvb_attach(mt352_attach, + &dvico_fusionhdtv, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, + 0x60, NULL, DVB_PLL_THOMSON_DTT7579)) + goto frontend_detach; + break; + } + /* ZL10353 replaces MT352 on later cards */ + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &dvico_fusionhdtv_plus_v1_1, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, + 0x60, NULL, DVB_PLL_THOMSON_DTT7579)) + goto frontend_detach; + } + break; + case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL: + /* The tin box says DEE1601, but it seems to be DTT7579 + * compatible, with a slightly different MT352 AGC gain. */ + fe0->dvb.frontend = dvb_attach(mt352_attach, + &dvico_fusionhdtv_dual, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, + 0x61, NULL, DVB_PLL_THOMSON_DTT7579)) + goto frontend_detach; + break; + } + /* ZL10353 replaces MT352 on later cards */ + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &dvico_fusionhdtv_plus_v1_1, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, + 0x61, NULL, DVB_PLL_THOMSON_DTT7579)) + goto frontend_detach; + } + break; + case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1: + fe0->dvb.frontend = dvb_attach(mt352_attach, + &dvico_fusionhdtv, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, + 0x61, NULL, DVB_PLL_LG_Z201)) + goto frontend_detach; + } + break; + case CX88_BOARD_KWORLD_DVB_T: + case CX88_BOARD_DNTV_LIVE_DVB_T: + case CX88_BOARD_ADSTECH_DVB_T_PCI: + fe0->dvb.frontend = dvb_attach(mt352_attach, + &dntv_live_dvbt_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, + 0x61, NULL, DVB_PLL_UNKNOWN_1)) + goto frontend_detach; + } + break; + case CX88_BOARD_DNTV_LIVE_DVB_T_PRO: +#if IS_ENABLED(CPTCFG_VIDEO_CX88_VP3054) + /* MT352 is on a secondary I2C bus made from some GPIO lines */ + fe0->dvb.frontend = dvb_attach(mt352_attach, &dntv_live_dvbt_pro_config, + &dev->vp3054->adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_PHILIPS_FMD1216ME_MK3)) + goto frontend_detach; + } +#else + printk(KERN_ERR "%s/2: built without vp3054 support\n", + core->name); +#endif + break; + case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID: + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &dvico_fusionhdtv_hybrid, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_THOMSON_FE6600)) + goto frontend_detach; + } + break; + case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &dvico_fusionhdtv_xc3028, + &core->i2c_adap); + if (fe0->dvb.frontend == NULL) + fe0->dvb.frontend = dvb_attach(mt352_attach, + &dvico_fusionhdtv_mt352_xc3028, + &core->i2c_adap); + /* + * On this board, the demod provides the I2C bus pullup. + * We must not permit gate_ctrl to be performed, or + * the xc3028 cannot communicate on the bus. + */ + if (fe0->dvb.frontend) + fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; + if (attach_xc3028(0x61, dev) < 0) + goto frontend_detach; + break; + case CX88_BOARD_PCHDTV_HD3000: + fe0->dvb.frontend = dvb_attach(or51132_attach, &pchdtv_hd3000, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_THOMSON_DTT761X)) + goto frontend_detach; + } + break; + case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q: + dev->ts_gen_cntrl = 0x08; + + /* Do a hardware reset of chip before using it. */ + cx_clear(MO_GP0_IO, 1); + mdelay(100); + cx_set(MO_GP0_IO, 1); + mdelay(200); + + /* Select RF connector callback */ + fusionhdtv_3_gold.pll_rf_set = lgdt330x_pll_rf_set; + fe0->dvb.frontend = dvb_attach(lgdt330x_attach, + &fusionhdtv_3_gold, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_MICROTUNE_4042FI5)) + goto frontend_detach; + } + break; + case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T: + dev->ts_gen_cntrl = 0x08; + + /* Do a hardware reset of chip before using it. */ + cx_clear(MO_GP0_IO, 1); + mdelay(100); + cx_set(MO_GP0_IO, 9); + mdelay(200); + fe0->dvb.frontend = dvb_attach(lgdt330x_attach, + &fusionhdtv_3_gold, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_THOMSON_DTT761X)) + goto frontend_detach; + } + break; + case CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD: + dev->ts_gen_cntrl = 0x08; + + /* Do a hardware reset of chip before using it. */ + cx_clear(MO_GP0_IO, 1); + mdelay(100); + cx_set(MO_GP0_IO, 1); + mdelay(200); + fe0->dvb.frontend = dvb_attach(lgdt330x_attach, + &fusionhdtv_5_gold, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_LG_TDVS_H06XF)) + goto frontend_detach; + if (!dvb_attach(tda9887_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x43)) + goto frontend_detach; + } + break; + case CX88_BOARD_PCHDTV_HD5500: + dev->ts_gen_cntrl = 0x08; + + /* Do a hardware reset of chip before using it. */ + cx_clear(MO_GP0_IO, 1); + mdelay(100); + cx_set(MO_GP0_IO, 1); + mdelay(200); + fe0->dvb.frontend = dvb_attach(lgdt330x_attach, + &pchdtv_hd5500, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_LG_TDVS_H06XF)) + goto frontend_detach; + if (!dvb_attach(tda9887_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x43)) + goto frontend_detach; + } + break; + case CX88_BOARD_ATI_HDTVWONDER: + fe0->dvb.frontend = dvb_attach(nxt200x_attach, + &ati_hdtvwonder, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_PHILIPS_TUV1236D)) + goto frontend_detach; + } + break; + case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1: + case CX88_BOARD_HAUPPAUGE_NOVASE2_S1: + fe0->dvb.frontend = dvb_attach(cx24123_attach, + &hauppauge_novas_config, + &core->i2c_adap); + if (fe0->dvb.frontend) { + bool override_tone; + + if (core->model == 92001) + override_tone = true; + else + override_tone = false; + + if (!dvb_attach(isl6421_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x08, ISL6421_DCL, 0x00, + override_tone)) + goto frontend_detach; + } + break; + case CX88_BOARD_KWORLD_DVBS_100: + fe0->dvb.frontend = dvb_attach(cx24123_attach, + &kworld_dvbs_100_config, + &core->i2c_adap); + if (fe0->dvb.frontend) { + core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage; + fe0->dvb.frontend->ops.set_voltage = kworld_dvbs_100_set_voltage; + } + break; + case CX88_BOARD_GENIATECH_DVBS: + fe0->dvb.frontend = dvb_attach(cx24123_attach, + &geniatech_dvbs_config, + &core->i2c_adap); + if (fe0->dvb.frontend) { + core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage; + fe0->dvb.frontend->ops.set_voltage = geniatech_dvbs_set_voltage; + } + break; + case CX88_BOARD_PINNACLE_PCTV_HD_800i: + fe0->dvb.frontend = dvb_attach(s5h1409_attach, + &pinnacle_pctv_hd_800i_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(xc5000_attach, fe0->dvb.frontend, + &core->i2c_adap, + &pinnacle_pctv_hd_800i_tuner_config)) + goto frontend_detach; + } + break; + case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: + fe0->dvb.frontend = dvb_attach(s5h1409_attach, + &dvico_hdtv5_pci_nano_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &core->i2c_adap, + .i2c_addr = 0x61, + }; + static struct xc2028_ctrl ctl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + .scode_table = XC3028_FE_OREN538, + }; + + fe = dvb_attach(xc2028_attach, + fe0->dvb.frontend, &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctl); + } + break; + case CX88_BOARD_PINNACLE_HYBRID_PCTV: + case CX88_BOARD_WINFAST_DTV1800H: + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &cx88_pinnacle_hybrid_pctv, + &core->i2c_adap); + if (fe0->dvb.frontend) { + fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; + if (attach_xc3028(0x61, dev) < 0) + goto frontend_detach; + } + break; + case CX88_BOARD_WINFAST_DTV1800H_XC4000: + case CX88_BOARD_WINFAST_DTV2000H_PLUS: + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &cx88_pinnacle_hybrid_pctv, + &core->i2c_adap); + if (fe0->dvb.frontend) { + struct xc4000_config cfg = { + .i2c_address = 0x61, + .default_pm = 0, + .dvb_amplitude = 134, + .set_smoothedcvbs = 1, + .if_khz = 4560 + }; + fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; + if (attach_xc4000(dev, &cfg) < 0) + goto frontend_detach; + } + break; + case CX88_BOARD_GENIATECH_X8000_MT: + dev->ts_gen_cntrl = 0x00; + + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &cx88_geniatech_x8000_mt, + &core->i2c_adap); + if (attach_xc3028(0x61, dev) < 0) + goto frontend_detach; + break; + case CX88_BOARD_KWORLD_ATSC_120: + fe0->dvb.frontend = dvb_attach(s5h1409_attach, + &kworld_atsc_120_config, + &core->i2c_adap); + if (attach_xc3028(0x61, dev) < 0) + goto frontend_detach; + break; + case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD: + fe0->dvb.frontend = dvb_attach(s5h1411_attach, + &dvico_fusionhdtv7_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(xc5000_attach, fe0->dvb.frontend, + &core->i2c_adap, + &dvico_fusionhdtv7_tuner_config)) + goto frontend_detach; + } + break; + case CX88_BOARD_HAUPPAUGE_HVR4000: + /* MFE frontend 1 */ + mfe_shared = 1; + dev->frontends.gate = 2; + /* DVB-S/S2 Init */ + fe0->dvb.frontend = dvb_attach(cx24116_attach, + &hauppauge_hvr4000_config, + &dev->core->i2c_adap); + if (fe0->dvb.frontend) { + if (!dvb_attach(isl6421_attach, + fe0->dvb.frontend, + &dev->core->i2c_adap, + 0x08, ISL6421_DCL, 0x00, false)) + goto frontend_detach; + } + /* MFE frontend 2 */ + fe1 = videobuf_dvb_get_frontend(&dev->frontends, 2); + if (!fe1) + goto frontend_detach; + /* DVB-T Init */ + fe1->dvb.frontend = dvb_attach(cx22702_attach, + &hauppauge_hvr_config, + &dev->core->i2c_adap); + if (fe1->dvb.frontend) { + fe1->dvb.frontend->id = 1; + if (!dvb_attach(simple_tuner_attach, + fe1->dvb.frontend, + &dev->core->i2c_adap, + 0x61, TUNER_PHILIPS_FMD1216ME_MK3)) + goto frontend_detach; + } + break; + case CX88_BOARD_HAUPPAUGE_HVR4000LITE: + fe0->dvb.frontend = dvb_attach(cx24116_attach, + &hauppauge_hvr4000_config, + &dev->core->i2c_adap); + if (fe0->dvb.frontend) { + if (!dvb_attach(isl6421_attach, + fe0->dvb.frontend, + &dev->core->i2c_adap, + 0x08, ISL6421_DCL, 0x00, false)) + goto frontend_detach; + } + break; + case CX88_BOARD_PROF_6200: + case CX88_BOARD_TBS_8910: + case CX88_BOARD_TEVII_S420: + fe0->dvb.frontend = dvb_attach(stv0299_attach, + &tevii_tuner_sharp_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60, + &core->i2c_adap, DVB_PLL_OPERA1)) + goto frontend_detach; + core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage; + fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; + + } else { + fe0->dvb.frontend = dvb_attach(stv0288_attach, + &tevii_tuner_earda_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(stb6000_attach, fe0->dvb.frontend, 0x61, + &core->i2c_adap)) + goto frontend_detach; + core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage; + fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; + } + } + break; + case CX88_BOARD_TEVII_S460: + fe0->dvb.frontend = dvb_attach(cx24116_attach, + &tevii_s460_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) + fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; + break; + case CX88_BOARD_TEVII_S464: + fe0->dvb.frontend = dvb_attach(ds3000_attach, + &tevii_ds3000_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(ts2020_attach, fe0->dvb.frontend, + &tevii_ts2020_config, &core->i2c_adap); + fe0->dvb.frontend->ops.set_voltage = + tevii_dvbs_set_voltage; + } + break; + case CX88_BOARD_OMICOM_SS4_PCI: + case CX88_BOARD_TBS_8920: + case CX88_BOARD_PROF_7300: + case CX88_BOARD_SATTRADE_ST4200: + fe0->dvb.frontend = dvb_attach(cx24116_attach, + &hauppauge_hvr4000_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) + fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; + break; + case CX88_BOARD_TERRATEC_CINERGY_HT_PCI_MKII: + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &cx88_terratec_cinergy_ht_pci_mkii_config, + &core->i2c_adap); + if (fe0->dvb.frontend) { + fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; + if (attach_xc3028(0x61, dev) < 0) + goto frontend_detach; + } + break; + case CX88_BOARD_PROF_7301:{ + struct dvb_tuner_ops *tuner_ops = NULL; + + fe0->dvb.frontend = dvb_attach(stv0900_attach, + &prof_7301_stv0900_config, + &core->i2c_adap, 0); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(stb6100_attach, fe0->dvb.frontend, + &prof_7301_stb6100_config, + &core->i2c_adap)) + goto frontend_detach; + + tuner_ops = &fe0->dvb.frontend->ops.tuner_ops; + tuner_ops->set_frequency = stb6100_set_freq; + tuner_ops->get_frequency = stb6100_get_freq; + tuner_ops->set_bandwidth = stb6100_set_bandw; + tuner_ops->get_bandwidth = stb6100_get_bandw; + + core->prev_set_voltage = + fe0->dvb.frontend->ops.set_voltage; + fe0->dvb.frontend->ops.set_voltage = + tevii_dvbs_set_voltage; + } + break; + } + case CX88_BOARD_SAMSUNG_SMT_7020: + dev->ts_gen_cntrl = 0x08; + + cx_set(MO_GP0_IO, 0x0101); + + cx_clear(MO_GP0_IO, 0x01); + mdelay(100); + cx_set(MO_GP0_IO, 0x01); + mdelay(200); + + fe0->dvb.frontend = dvb_attach(stv0299_attach, + &samsung_stv0299_config, + &dev->core->i2c_adap); + if (fe0->dvb.frontend) { + fe0->dvb.frontend->ops.tuner_ops.set_params = + samsung_smt_7020_tuner_set_params; + fe0->dvb.frontend->tuner_priv = + &dev->core->i2c_adap; + fe0->dvb.frontend->ops.set_voltage = + samsung_smt_7020_set_voltage; + fe0->dvb.frontend->ops.set_tone = + samsung_smt_7020_set_tone; + } + + break; + case CX88_BOARD_TWINHAN_VP1027_DVBS: + dev->ts_gen_cntrl = 0x00; + fe0->dvb.frontend = dvb_attach(mb86a16_attach, + &twinhan_vp1027, + &core->i2c_adap); + if (fe0->dvb.frontend) { + core->prev_set_voltage = + fe0->dvb.frontend->ops.set_voltage; + fe0->dvb.frontend->ops.set_voltage = + vp1027_set_voltage; + } + break; + + default: + printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n", + core->name); + break; + } + + if ( (NULL == fe0->dvb.frontend) || (fe1 && NULL == fe1->dvb.frontend) ) { + printk(KERN_ERR + "%s/2: frontend initialization failed\n", + core->name); + goto frontend_detach; + } + /* define general-purpose callback pointer */ + fe0->dvb.frontend->callback = cx88_tuner_callback; + + /* Ensure all frontends negotiate bus access */ + fe0->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl; + if (fe1) + fe1->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl; + + /* Put the analog decoder in standby to keep it quiet */ + call_all(core, core, s_power, 0); + + /* register everything */ + res = videobuf_dvb_register_bus(&dev->frontends, THIS_MODULE, dev, + &dev->pci->dev, adapter_nr, mfe_shared); + if (res) + goto frontend_detach; + return res; + +frontend_detach: + core->gate_ctrl = NULL; + videobuf_dvb_dealloc_frontends(&dev->frontends); + return res; +} + +/* ----------------------------------------------------------- */ + +/* CX8802 MPEG -> mini driver - We have been given the hardware */ +static int cx8802_dvb_advise_acquire(struct cx8802_driver *drv) +{ + struct cx88_core *core = drv->core; + int err = 0; + dprintk( 1, "%s\n", __func__); + + switch (core->boardnr) { + case CX88_BOARD_HAUPPAUGE_HVR1300: + /* We arrive here with either the cx23416 or the cx22702 + * on the bus. Take the bus from the cx23416 and enable the + * cx22702 demod + */ + /* Toggle reset on cx22702 leaving i2c active */ + cx_set(MO_GP0_IO, 0x00000080); + udelay(1000); + cx_clear(MO_GP0_IO, 0x00000080); + udelay(50); + cx_set(MO_GP0_IO, 0x00000080); + udelay(1000); + /* enable the cx22702 pins */ + cx_clear(MO_GP0_IO, 0x00000004); + udelay(1000); + break; + + case CX88_BOARD_HAUPPAUGE_HVR3000: + case CX88_BOARD_HAUPPAUGE_HVR4000: + /* Toggle reset on cx22702 leaving i2c active */ + cx_set(MO_GP0_IO, 0x00000080); + udelay(1000); + cx_clear(MO_GP0_IO, 0x00000080); + udelay(50); + cx_set(MO_GP0_IO, 0x00000080); + udelay(1000); + switch (core->dvbdev->frontends.active_fe_id) { + case 1: /* DVB-S/S2 Enabled */ + /* tri-state the cx22702 pins */ + cx_set(MO_GP0_IO, 0x00000004); + /* Take the cx24116/cx24123 out of reset */ + cx_write(MO_SRST_IO, 1); + core->dvbdev->ts_gen_cntrl = 0x02; /* Parallel IO */ + break; + case 2: /* DVB-T Enabled */ + /* Put the cx24116/cx24123 into reset */ + cx_write(MO_SRST_IO, 0); + /* enable the cx22702 pins */ + cx_clear(MO_GP0_IO, 0x00000004); + core->dvbdev->ts_gen_cntrl = 0x0c; /* Serial IO */ + break; + } + udelay(1000); + break; + + case CX88_BOARD_WINFAST_DTV2000H_PLUS: + /* set RF input to AIR for DVB-T (GPIO 16) */ + cx_write(MO_GP2_IO, 0x0101); + break; + + default: + err = -ENODEV; + } + return err; +} + +/* CX8802 MPEG -> mini driver - We no longer have the hardware */ +static int cx8802_dvb_advise_release(struct cx8802_driver *drv) +{ + struct cx88_core *core = drv->core; + int err = 0; + dprintk( 1, "%s\n", __func__); + + switch (core->boardnr) { + case CX88_BOARD_HAUPPAUGE_HVR1300: + /* Do Nothing, leave the cx22702 on the bus. */ + break; + case CX88_BOARD_HAUPPAUGE_HVR3000: + case CX88_BOARD_HAUPPAUGE_HVR4000: + break; + default: + err = -ENODEV; + } + return err; +} + +static int cx8802_dvb_probe(struct cx8802_driver *drv) +{ + struct cx88_core *core = drv->core; + struct cx8802_dev *dev = drv->core->dvbdev; + int err; + struct videobuf_dvb_frontend *fe; + int i; + + dprintk( 1, "%s\n", __func__); + dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n", + core->boardnr, + core->name, + core->pci_bus, + core->pci_slot); + + err = -ENODEV; + if (!(core->board.mpeg & CX88_MPEG_DVB)) + goto fail_core; + + /* If vp3054 isn't enabled, a stub will just return 0 */ + err = vp3054_i2c_probe(dev); + if (0 != err) + goto fail_core; + + /* dvb stuff */ + printk(KERN_INFO "%s/2: cx2388x based DVB/ATSC card\n", core->name); + dev->ts_gen_cntrl = 0x0c; + + err = cx8802_alloc_frontends(dev); + if (err) + goto fail_core; + + err = -ENODEV; + for (i = 1; i <= core->board.num_frontends; i++) { + fe = videobuf_dvb_get_frontend(&core->dvbdev->frontends, i); + if (fe == NULL) { + printk(KERN_ERR "%s() failed to get frontend(%d)\n", + __func__, i); + goto fail_probe; + } + videobuf_queue_sg_init(&fe->dvb.dvbq, &dvb_qops, + &dev->pci->dev, &dev->slock, + V4L2_BUF_TYPE_VIDEO_CAPTURE, + V4L2_FIELD_TOP, + sizeof(struct cx88_buffer), + dev, NULL); + /* init struct videobuf_dvb */ + fe->dvb.name = dev->core->name; + } + + err = dvb_register(dev); + if (err) + /* frontends/adapter de-allocated in dvb_register */ + printk(KERN_ERR "%s/2: dvb_register failed (err = %d)\n", + core->name, err); + return err; +fail_probe: + videobuf_dvb_dealloc_frontends(&core->dvbdev->frontends); +fail_core: + return err; +} + +static int cx8802_dvb_remove(struct cx8802_driver *drv) +{ + struct cx88_core *core = drv->core; + struct cx8802_dev *dev = drv->core->dvbdev; + + dprintk( 1, "%s\n", __func__); + + videobuf_dvb_unregister_bus(&dev->frontends); + + vp3054_i2c_remove(dev); + + core->gate_ctrl = NULL; + + return 0; +} + +static struct cx8802_driver cx8802_dvb_driver = { + .type_id = CX88_MPEG_DVB, + .hw_access = CX8802_DRVCTL_SHARED, + .probe = cx8802_dvb_probe, + .remove = cx8802_dvb_remove, + .advise_acquire = cx8802_dvb_advise_acquire, + .advise_release = cx8802_dvb_advise_release, +}; + +static int __init dvb_init(void) +{ + printk(KERN_INFO "cx88/2: cx2388x dvb driver version %s loaded\n", + CX88_VERSION); + return cx8802_register_driver(&cx8802_dvb_driver); +} + +static void __exit dvb_fini(void) +{ + cx8802_unregister_driver(&cx8802_dvb_driver); +} + +module_init(dvb_init); +module_exit(dvb_fini); |