diff options
Diffstat (limited to 'drivers/gpu/drm/gma500/cdv_intel_display.c')
-rw-r--r-- | drivers/gpu/drm/gma500/cdv_intel_display.c | 1790 |
1 files changed, 1790 insertions, 0 deletions
diff --git a/drivers/gpu/drm/gma500/cdv_intel_display.c b/drivers/gpu/drm/gma500/cdv_intel_display.c new file mode 100644 index 0000000..82430ad --- /dev/null +++ b/drivers/gpu/drm/gma500/cdv_intel_display.c @@ -0,0 +1,1790 @@ +/* + * Copyright © 2006-2011 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Authors: + * Eric Anholt <eric@anholt.net> + */ + +#include <linux/i2c.h> +#include <linux/pm_runtime.h> + +#include <drm/drmP.h> +#include "framebuffer.h" +#include "psb_drv.h" +#include "psb_intel_drv.h" +#include "psb_intel_reg.h" +#include "psb_intel_display.h" +#include "power.h" +#include "cdv_device.h" + + +struct cdv_intel_range_t { + int min, max; +}; + +struct cdv_intel_p2_t { + int dot_limit; + int p2_slow, p2_fast; +}; + +struct cdv_intel_clock_t { + /* given values */ + int n; + int m1, m2; + int p1, p2; + /* derived values */ + int dot; + int vco; + int m; + int p; +}; + +#define INTEL_P2_NUM 2 + +struct cdv_intel_limit_t { + struct cdv_intel_range_t dot, vco, n, m, m1, m2, p, p1; + struct cdv_intel_p2_t p2; + bool (*find_pll)(const struct cdv_intel_limit_t *, struct drm_crtc *, + int, int, struct cdv_intel_clock_t *); +}; + +static bool cdv_intel_find_best_PLL(const struct cdv_intel_limit_t *limit, + struct drm_crtc *crtc, int target, int refclk, + struct cdv_intel_clock_t *best_clock); +static bool cdv_intel_find_dp_pll(const struct cdv_intel_limit_t *limit, struct drm_crtc *crtc, int target, + int refclk, + struct cdv_intel_clock_t *best_clock); + +#define CDV_LIMIT_SINGLE_LVDS_96 0 +#define CDV_LIMIT_SINGLE_LVDS_100 1 +#define CDV_LIMIT_DAC_HDMI_27 2 +#define CDV_LIMIT_DAC_HDMI_96 3 +#define CDV_LIMIT_DP_27 4 +#define CDV_LIMIT_DP_100 5 + +static const struct cdv_intel_limit_t cdv_intel_limits[] = { + { /* CDV_SINGLE_LVDS_96MHz */ + .dot = {.min = 20000, .max = 115500}, + .vco = {.min = 1800000, .max = 3600000}, + .n = {.min = 2, .max = 6}, + .m = {.min = 60, .max = 160}, + .m1 = {.min = 0, .max = 0}, + .m2 = {.min = 58, .max = 158}, + .p = {.min = 28, .max = 140}, + .p1 = {.min = 2, .max = 10}, + .p2 = {.dot_limit = 200000, + .p2_slow = 14, .p2_fast = 14}, + .find_pll = cdv_intel_find_best_PLL, + }, + { /* CDV_SINGLE_LVDS_100MHz */ + .dot = {.min = 20000, .max = 115500}, + .vco = {.min = 1800000, .max = 3600000}, + .n = {.min = 2, .max = 6}, + .m = {.min = 60, .max = 160}, + .m1 = {.min = 0, .max = 0}, + .m2 = {.min = 58, .max = 158}, + .p = {.min = 28, .max = 140}, + .p1 = {.min = 2, .max = 10}, + /* The single-channel range is 25-112Mhz, and dual-channel + * is 80-224Mhz. Prefer single channel as much as possible. + */ + .p2 = {.dot_limit = 200000, .p2_slow = 14, .p2_fast = 14}, + .find_pll = cdv_intel_find_best_PLL, + }, + { /* CDV_DAC_HDMI_27MHz */ + .dot = {.min = 20000, .max = 400000}, + .vco = {.min = 1809000, .max = 3564000}, + .n = {.min = 1, .max = 1}, + .m = {.min = 67, .max = 132}, + .m1 = {.min = 0, .max = 0}, + .m2 = {.min = 65, .max = 130}, + .p = {.min = 5, .max = 90}, + .p1 = {.min = 1, .max = 9}, + .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 5}, + .find_pll = cdv_intel_find_best_PLL, + }, + { /* CDV_DAC_HDMI_96MHz */ + .dot = {.min = 20000, .max = 400000}, + .vco = {.min = 1800000, .max = 3600000}, + .n = {.min = 2, .max = 6}, + .m = {.min = 60, .max = 160}, + .m1 = {.min = 0, .max = 0}, + .m2 = {.min = 58, .max = 158}, + .p = {.min = 5, .max = 100}, + .p1 = {.min = 1, .max = 10}, + .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 5}, + .find_pll = cdv_intel_find_best_PLL, + }, + { /* CDV_DP_27MHz */ + .dot = {.min = 160000, .max = 272000}, + .vco = {.min = 1809000, .max = 3564000}, + .n = {.min = 1, .max = 1}, + .m = {.min = 67, .max = 132}, + .m1 = {.min = 0, .max = 0}, + .m2 = {.min = 65, .max = 130}, + .p = {.min = 5, .max = 90}, + .p1 = {.min = 1, .max = 9}, + .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 10}, + .find_pll = cdv_intel_find_dp_pll, + }, + { /* CDV_DP_100MHz */ + .dot = {.min = 160000, .max = 272000}, + .vco = {.min = 1800000, .max = 3600000}, + .n = {.min = 2, .max = 6}, + .m = {.min = 60, .max = 164}, + .m1 = {.min = 0, .max = 0}, + .m2 = {.min = 58, .max = 162}, + .p = {.min = 5, .max = 100}, + .p1 = {.min = 1, .max = 10}, + .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 10}, + .find_pll = cdv_intel_find_dp_pll, + } +}; + +#define _wait_for(COND, MS, W) ({ \ + unsigned long timeout__ = jiffies + msecs_to_jiffies(MS); \ + int ret__ = 0; \ + while (!(COND)) { \ + if (time_after(jiffies, timeout__)) { \ + ret__ = -ETIMEDOUT; \ + break; \ + } \ + if (W && !in_dbg_master()) \ + msleep(W); \ + } \ + ret__; \ +}) + +#define wait_for(COND, MS) _wait_for(COND, MS, 1) + + +int cdv_sb_read(struct drm_device *dev, u32 reg, u32 *val) +{ + int ret; + + ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000); + if (ret) { + DRM_ERROR("timeout waiting for SB to idle before read\n"); + return ret; + } + + REG_WRITE(SB_ADDR, reg); + REG_WRITE(SB_PCKT, + SET_FIELD(SB_OPCODE_READ, SB_OPCODE) | + SET_FIELD(SB_DEST_DPLL, SB_DEST) | + SET_FIELD(0xf, SB_BYTE_ENABLE)); + + ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000); + if (ret) { + DRM_ERROR("timeout waiting for SB to idle after read\n"); + return ret; + } + + *val = REG_READ(SB_DATA); + + return 0; +} + +int cdv_sb_write(struct drm_device *dev, u32 reg, u32 val) +{ + int ret; + static bool dpio_debug = true; + u32 temp; + + if (dpio_debug) { + if (cdv_sb_read(dev, reg, &temp) == 0) + DRM_DEBUG_KMS("0x%08x: 0x%08x (before)\n", reg, temp); + DRM_DEBUG_KMS("0x%08x: 0x%08x\n", reg, val); + } + + ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000); + if (ret) { + DRM_ERROR("timeout waiting for SB to idle before write\n"); + return ret; + } + + REG_WRITE(SB_ADDR, reg); + REG_WRITE(SB_DATA, val); + REG_WRITE(SB_PCKT, + SET_FIELD(SB_OPCODE_WRITE, SB_OPCODE) | + SET_FIELD(SB_DEST_DPLL, SB_DEST) | + SET_FIELD(0xf, SB_BYTE_ENABLE)); + + ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000); + if (ret) { + DRM_ERROR("timeout waiting for SB to idle after write\n"); + return ret; + } + + if (dpio_debug) { + if (cdv_sb_read(dev, reg, &temp) == 0) + DRM_DEBUG_KMS("0x%08x: 0x%08x (after)\n", reg, temp); + } + + return 0; +} + +/* Reset the DPIO configuration register. The BIOS does this at every + * mode set. + */ +void cdv_sb_reset(struct drm_device *dev) +{ + + REG_WRITE(DPIO_CFG, 0); + REG_READ(DPIO_CFG); + REG_WRITE(DPIO_CFG, DPIO_MODE_SELECT_0 | DPIO_CMN_RESET_N); +} + +/* Unlike most Intel display engines, on Cedarview the DPLL registers + * are behind this sideband bus. They must be programmed while the + * DPLL reference clock is on in the DPLL control register, but before + * the DPLL is enabled in the DPLL control register. + */ +static int +cdv_dpll_set_clock_cdv(struct drm_device *dev, struct drm_crtc *crtc, + struct cdv_intel_clock_t *clock, bool is_lvds, u32 ddi_select) +{ + struct psb_intel_crtc *psb_crtc = to_psb_intel_crtc(crtc); + int pipe = psb_crtc->pipe; + u32 m, n_vco, p; + int ret = 0; + int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; + int ref_sfr = (pipe == 0) ? SB_REF_DPLLA : SB_REF_DPLLB; + u32 ref_value; + u32 lane_reg, lane_value; + + cdv_sb_reset(dev); + + REG_WRITE(dpll_reg, DPLL_SYNCLOCK_ENABLE | DPLL_VGA_MODE_DIS); + + udelay(100); + + /* Follow the BIOS and write the REF/SFR Register. Hardcoded value */ + ref_value = 0x68A701; + + cdv_sb_write(dev, SB_REF_SFR(pipe), ref_value); + + /* We don't know what the other fields of these regs are, so + * leave them in place. + */ + /* + * The BIT 14:13 of 0x8010/0x8030 is used to select the ref clk + * for the pipe A/B. Display spec 1.06 has wrong definition. + * Correct definition is like below: + * + * refclka mean use clock from same PLL + * + * if DPLLA sets 01 and DPLLB sets 01, they use clock from their pll + * + * if DPLLA sets 01 and DPLLB sets 02, both use clk from DPLLA + * + */ + ret = cdv_sb_read(dev, ref_sfr, &ref_value); + if (ret) + return ret; + ref_value &= ~(REF_CLK_MASK); + + /* use DPLL_A for pipeB on CRT/HDMI */ + if (pipe == 1 && !is_lvds && !(ddi_select & DP_MASK)) { + DRM_DEBUG_KMS("use DPLLA for pipe B\n"); + ref_value |= REF_CLK_DPLLA; + } else { + DRM_DEBUG_KMS("use their DPLL for pipe A/B\n"); + ref_value |= REF_CLK_DPLL; + } + ret = cdv_sb_write(dev, ref_sfr, ref_value); + if (ret) + return ret; + + ret = cdv_sb_read(dev, SB_M(pipe), &m); + if (ret) + return ret; + m &= ~SB_M_DIVIDER_MASK; + m |= ((clock->m2) << SB_M_DIVIDER_SHIFT); + ret = cdv_sb_write(dev, SB_M(pipe), m); + if (ret) + return ret; + + ret = cdv_sb_read(dev, SB_N_VCO(pipe), &n_vco); + if (ret) + return ret; + + /* Follow the BIOS to program the N_DIVIDER REG */ + n_vco &= 0xFFFF; + n_vco |= 0x107; + n_vco &= ~(SB_N_VCO_SEL_MASK | + SB_N_DIVIDER_MASK | + SB_N_CB_TUNE_MASK); + + n_vco |= ((clock->n) << SB_N_DIVIDER_SHIFT); + + if (clock->vco < 2250000) { + n_vco |= (2 << SB_N_CB_TUNE_SHIFT); + n_vco |= (0 << SB_N_VCO_SEL_SHIFT); + } else if (clock->vco < 2750000) { + n_vco |= (1 << SB_N_CB_TUNE_SHIFT); + n_vco |= (1 << SB_N_VCO_SEL_SHIFT); + } else if (clock->vco < 3300000) { + n_vco |= (0 << SB_N_CB_TUNE_SHIFT); + n_vco |= (2 << SB_N_VCO_SEL_SHIFT); + } else { + n_vco |= (0 << SB_N_CB_TUNE_SHIFT); + n_vco |= (3 << SB_N_VCO_SEL_SHIFT); + } + + ret = cdv_sb_write(dev, SB_N_VCO(pipe), n_vco); + if (ret) + return ret; + + ret = cdv_sb_read(dev, SB_P(pipe), &p); + if (ret) + return ret; + p &= ~(SB_P2_DIVIDER_MASK | SB_P1_DIVIDER_MASK); + p |= SET_FIELD(clock->p1, SB_P1_DIVIDER); + switch (clock->p2) { + case 5: + p |= SET_FIELD(SB_P2_5, SB_P2_DIVIDER); + break; + case 10: + p |= SET_FIELD(SB_P2_10, SB_P2_DIVIDER); + break; + case 14: + p |= SET_FIELD(SB_P2_14, SB_P2_DIVIDER); + break; + case 7: + p |= SET_FIELD(SB_P2_7, SB_P2_DIVIDER); + break; + default: + DRM_ERROR("Bad P2 clock: %d\n", clock->p2); + return -EINVAL; + } + ret = cdv_sb_write(dev, SB_P(pipe), p); + if (ret) + return ret; + + if (ddi_select) { + if ((ddi_select & DDI_MASK) == DDI0_SELECT) { + lane_reg = PSB_LANE0; + cdv_sb_read(dev, lane_reg, &lane_value); + lane_value &= ~(LANE_PLL_MASK); + lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe); + cdv_sb_write(dev, lane_reg, lane_value); + + lane_reg = PSB_LANE1; + cdv_sb_read(dev, lane_reg, &lane_value); + lane_value &= ~(LANE_PLL_MASK); + lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe); + cdv_sb_write(dev, lane_reg, lane_value); + } else { + lane_reg = PSB_LANE2; + cdv_sb_read(dev, lane_reg, &lane_value); + lane_value &= ~(LANE_PLL_MASK); + lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe); + cdv_sb_write(dev, lane_reg, lane_value); + + lane_reg = PSB_LANE3; + cdv_sb_read(dev, lane_reg, &lane_value); + lane_value &= ~(LANE_PLL_MASK); + lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe); + cdv_sb_write(dev, lane_reg, lane_value); + } + } + return 0; +} + +/* + * Returns whether any encoder on the specified pipe is of the specified type + */ +static bool cdv_intel_pipe_has_type(struct drm_crtc *crtc, int type) +{ + struct drm_device *dev = crtc->dev; + struct drm_mode_config *mode_config = &dev->mode_config; + struct drm_connector *l_entry; + + list_for_each_entry(l_entry, &mode_config->connector_list, head) { + if (l_entry->encoder && l_entry->encoder->crtc == crtc) { + struct psb_intel_encoder *psb_intel_encoder = + psb_intel_attached_encoder(l_entry); + if (psb_intel_encoder->type == type) + return true; + } + } + return false; +} + +static const struct cdv_intel_limit_t *cdv_intel_limit(struct drm_crtc *crtc, + int refclk) +{ + const struct cdv_intel_limit_t *limit; + if (cdv_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { + /* + * Now only single-channel LVDS is supported on CDV. If it is + * incorrect, please add the dual-channel LVDS. + */ + if (refclk == 96000) + limit = &cdv_intel_limits[CDV_LIMIT_SINGLE_LVDS_96]; + else + limit = &cdv_intel_limits[CDV_LIMIT_SINGLE_LVDS_100]; + } else if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) || + psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) { + if (refclk == 27000) + limit = &cdv_intel_limits[CDV_LIMIT_DP_27]; + else + limit = &cdv_intel_limits[CDV_LIMIT_DP_100]; + } else { + if (refclk == 27000) + limit = &cdv_intel_limits[CDV_LIMIT_DAC_HDMI_27]; + else + limit = &cdv_intel_limits[CDV_LIMIT_DAC_HDMI_96]; + } + return limit; +} + +/* m1 is reserved as 0 in CDV, n is a ring counter */ +static void cdv_intel_clock(struct drm_device *dev, + int refclk, struct cdv_intel_clock_t *clock) +{ + clock->m = clock->m2 + 2; + clock->p = clock->p1 * clock->p2; + clock->vco = (refclk * clock->m) / clock->n; + clock->dot = clock->vco / clock->p; +} + + +#define INTELPllInvalid(s) { /* ErrorF (s) */; return false; } +static bool cdv_intel_PLL_is_valid(struct drm_crtc *crtc, + const struct cdv_intel_limit_t *limit, + struct cdv_intel_clock_t *clock) +{ + if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1) + INTELPllInvalid("p1 out of range\n"); + if (clock->p < limit->p.min || limit->p.max < clock->p) + INTELPllInvalid("p out of range\n"); + /* unnecessary to check the range of m(m1/M2)/n again */ + if (clock->vco < limit->vco.min || limit->vco.max < clock->vco) + INTELPllInvalid("vco out of range\n"); + /* XXX: We may need to be checking "Dot clock" + * depending on the multiplier, connector, etc., + * rather than just a single range. + */ + if (clock->dot < limit->dot.min || limit->dot.max < clock->dot) + INTELPllInvalid("dot out of range\n"); + + return true; +} + +static bool cdv_intel_find_best_PLL(const struct cdv_intel_limit_t *limit, + struct drm_crtc *crtc, int target, int refclk, + struct cdv_intel_clock_t *best_clock) +{ + struct drm_device *dev = crtc->dev; + struct cdv_intel_clock_t clock; + int err = target; + + + if (cdv_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && + (REG_READ(LVDS) & LVDS_PORT_EN) != 0) { + /* + * For LVDS, if the panel is on, just rely on its current + * settings for dual-channel. We haven't figured out how to + * reliably set up different single/dual channel state, if we + * even can. + */ + if ((REG_READ(LVDS) & LVDS_CLKB_POWER_MASK) == + LVDS_CLKB_POWER_UP) + clock.p2 = limit->p2.p2_fast; + else + clock.p2 = limit->p2.p2_slow; + } else { + if (target < limit->p2.dot_limit) + clock.p2 = limit->p2.p2_slow; + else + clock.p2 = limit->p2.p2_fast; + } + + memset(best_clock, 0, sizeof(*best_clock)); + clock.m1 = 0; + /* m1 is reserved as 0 in CDV, n is a ring counter. + So skip the m1 loop */ + for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) { + for (clock.m2 = limit->m2.min; clock.m2 <= limit->m2.max; + clock.m2++) { + for (clock.p1 = limit->p1.min; + clock.p1 <= limit->p1.max; + clock.p1++) { + int this_err; + + cdv_intel_clock(dev, refclk, &clock); + + if (!cdv_intel_PLL_is_valid(crtc, + limit, &clock)) + continue; + + this_err = abs(clock.dot - target); + if (this_err < err) { + *best_clock = clock; + err = this_err; + } + } + } + } + + return err != target; +} + +static bool cdv_intel_find_dp_pll(const struct cdv_intel_limit_t *limit, struct drm_crtc *crtc, int target, + int refclk, + struct cdv_intel_clock_t *best_clock) +{ + struct cdv_intel_clock_t clock; + if (refclk == 27000) { + if (target < 200000) { + clock.p1 = 2; + clock.p2 = 10; + clock.n = 1; + clock.m1 = 0; + clock.m2 = 118; + } else { + clock.p1 = 1; + clock.p2 = 10; + clock.n = 1; + clock.m1 = 0; + clock.m2 = 98; + } + } else if (refclk == 100000) { + if (target < 200000) { + clock.p1 = 2; + clock.p2 = 10; + clock.n = 5; + clock.m1 = 0; + clock.m2 = 160; + } else { + clock.p1 = 1; + clock.p2 = 10; + clock.n = 5; + clock.m1 = 0; + clock.m2 = 133; + } + } else + return false; + clock.m = clock.m2 + 2; + clock.p = clock.p1 * clock.p2; + clock.vco = (refclk * clock.m) / clock.n; + clock.dot = clock.vco / clock.p; + memcpy(best_clock, &clock, sizeof(struct cdv_intel_clock_t)); + return true; +} + +static int cdv_intel_pipe_set_base(struct drm_crtc *crtc, + int x, int y, struct drm_framebuffer *old_fb) +{ + struct drm_device *dev = crtc->dev; + struct drm_psb_private *dev_priv = dev->dev_private; + struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); + struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb); + int pipe = psb_intel_crtc->pipe; + const struct psb_offset *map = &dev_priv->regmap[pipe]; + unsigned long start, offset; + u32 dspcntr; + int ret = 0; + + if (!gma_power_begin(dev, true)) + return 0; + + /* no fb bound */ + if (!crtc->fb) { + dev_err(dev->dev, "No FB bound\n"); + goto psb_intel_pipe_cleaner; + } + + + /* We are displaying this buffer, make sure it is actually loaded + into the GTT */ + ret = psb_gtt_pin(psbfb->gtt); + if (ret < 0) + goto psb_intel_pipe_set_base_exit; + start = psbfb->gtt->offset; + offset = y * crtc->fb->pitches[0] + x * (crtc->fb->bits_per_pixel / 8); + + REG_WRITE(map->stride, crtc->fb->pitches[0]); + + dspcntr = REG_READ(map->cntr); + dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; + + switch (crtc->fb->bits_per_pixel) { + case 8: + dspcntr |= DISPPLANE_8BPP; + break; + case 16: + if (crtc->fb->depth == 15) + dspcntr |= DISPPLANE_15_16BPP; + else + dspcntr |= DISPPLANE_16BPP; + break; + case 24: + case 32: + dspcntr |= DISPPLANE_32BPP_NO_ALPHA; + break; + default: + dev_err(dev->dev, "Unknown color depth\n"); + ret = -EINVAL; + goto psb_intel_pipe_set_base_exit; + } + REG_WRITE(map->cntr, dspcntr); + + dev_dbg(dev->dev, + "Writing base %08lX %08lX %d %d\n", start, offset, x, y); + + REG_WRITE(map->base, offset); + REG_READ(map->base); + REG_WRITE(map->surf, start); + REG_READ(map->surf); + +psb_intel_pipe_cleaner: + /* If there was a previous display we can now unpin it */ + if (old_fb) + psb_gtt_unpin(to_psb_fb(old_fb)->gtt); + +psb_intel_pipe_set_base_exit: + gma_power_end(dev); + return ret; +} + +#define FIFO_PIPEA (1 << 0) +#define FIFO_PIPEB (1 << 1) + +static bool cdv_intel_pipe_enabled(struct drm_device *dev, int pipe) +{ + struct drm_crtc *crtc; + struct drm_psb_private *dev_priv = dev->dev_private; + struct psb_intel_crtc *psb_intel_crtc = NULL; + + crtc = dev_priv->pipe_to_crtc_mapping[pipe]; + psb_intel_crtc = to_psb_intel_crtc(crtc); + + if (crtc->fb == NULL || !psb_intel_crtc->active) + return false; + return true; +} + +static bool cdv_intel_single_pipe_active (struct drm_device *dev) +{ + uint32_t pipe_enabled = 0; + + if (cdv_intel_pipe_enabled(dev, 0)) + pipe_enabled |= FIFO_PIPEA; + + if (cdv_intel_pipe_enabled(dev, 1)) + pipe_enabled |= FIFO_PIPEB; + + + DRM_DEBUG_KMS("pipe enabled %x\n", pipe_enabled); + + if (pipe_enabled == FIFO_PIPEA || pipe_enabled == FIFO_PIPEB) + return true; + else + return false; +} + +static bool is_pipeb_lvds(struct drm_device *dev, struct drm_crtc *crtc) +{ + struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); + struct drm_mode_config *mode_config = &dev->mode_config; + struct drm_connector *connector; + + if (psb_intel_crtc->pipe != 1) + return false; + + list_for_each_entry(connector, &mode_config->connector_list, head) { + struct psb_intel_encoder *psb_intel_encoder = + psb_intel_attached_encoder(connector); + + if (!connector->encoder + || connector->encoder->crtc != crtc) + continue; + + if (psb_intel_encoder->type == INTEL_OUTPUT_LVDS) + return true; + } + + return false; +} + +static void cdv_intel_disable_self_refresh (struct drm_device *dev) +{ + if (REG_READ(FW_BLC_SELF) & FW_BLC_SELF_EN) { + + /* Disable self-refresh before adjust WM */ + REG_WRITE(FW_BLC_SELF, (REG_READ(FW_BLC_SELF) & ~FW_BLC_SELF_EN)); + REG_READ(FW_BLC_SELF); + + cdv_intel_wait_for_vblank(dev); + + /* Cedarview workaround to write ovelay plane, which force to leave + * MAX_FIFO state. + */ + REG_WRITE(OV_OVADD, 0/*dev_priv->ovl_offset*/); + REG_READ(OV_OVADD); + + cdv_intel_wait_for_vblank(dev); + } + +} + +static void cdv_intel_update_watermark (struct drm_device *dev, struct drm_crtc *crtc) +{ + + if (cdv_intel_single_pipe_active(dev)) { + u32 fw; + + fw = REG_READ(DSPFW1); + fw &= ~DSP_FIFO_SR_WM_MASK; + fw |= (0x7e << DSP_FIFO_SR_WM_SHIFT); + fw &= ~CURSOR_B_FIFO_WM_MASK; + fw |= (0x4 << CURSOR_B_FIFO_WM_SHIFT); + REG_WRITE(DSPFW1, fw); + + fw = REG_READ(DSPFW2); + fw &= ~CURSOR_A_FIFO_WM_MASK; + fw |= (0x6 << CURSOR_A_FIFO_WM_SHIFT); + fw &= ~DSP_PLANE_C_FIFO_WM_MASK; + fw |= (0x8 << DSP_PLANE_C_FIFO_WM_SHIFT); + REG_WRITE(DSPFW2, fw); + + REG_WRITE(DSPFW3, 0x36000000); + + /* ignore FW4 */ + + if (is_pipeb_lvds(dev, crtc)) { + REG_WRITE(DSPFW5, 0x00040330); + } else { + fw = (3 << DSP_PLANE_B_FIFO_WM1_SHIFT) | + (4 << DSP_PLANE_A_FIFO_WM1_SHIFT) | + (3 << CURSOR_B_FIFO_WM1_SHIFT) | + (4 << CURSOR_FIFO_SR_WM1_SHIFT); + REG_WRITE(DSPFW5, fw); + } + + REG_WRITE(DSPFW6, 0x10); + + cdv_intel_wait_for_vblank(dev); + + /* enable self-refresh for single pipe active */ + REG_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN); + REG_READ(FW_BLC_SELF); + cdv_intel_wait_for_vblank(dev); + + } else { + + /* HW team suggested values... */ + REG_WRITE(DSPFW1, 0x3f880808); + REG_WRITE(DSPFW2, 0x0b020202); + REG_WRITE(DSPFW3, 0x24000000); + REG_WRITE(DSPFW4, 0x08030202); + REG_WRITE(DSPFW5, 0x01010101); + REG_WRITE(DSPFW6, 0x1d0); + + cdv_intel_wait_for_vblank(dev); + + cdv_intel_disable_self_refresh(dev); + + } +} + +/** Loads the palette/gamma unit for the CRTC with the prepared values */ +static void cdv_intel_crtc_load_lut(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_psb_private *dev_priv = dev->dev_private; + struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); + int palreg = PALETTE_A; + int i; + + /* The clocks have to be on to load the palette. */ + if (!crtc->enabled) + return; + + switch (psb_intel_crtc->pipe) { + case 0: + break; + case 1: + palreg = PALETTE_B; + break; + case 2: + palreg = PALETTE_C; + break; + default: + dev_err(dev->dev, "Illegal Pipe Number.\n"); + return; + } + + if (gma_power_begin(dev, false)) { + for (i = 0; i < 256; i++) { + REG_WRITE(palreg + 4 * i, + ((psb_intel_crtc->lut_r[i] + + psb_intel_crtc->lut_adj[i]) << 16) | + ((psb_intel_crtc->lut_g[i] + + psb_intel_crtc->lut_adj[i]) << 8) | + (psb_intel_crtc->lut_b[i] + + psb_intel_crtc->lut_adj[i])); + } + gma_power_end(dev); + } else { + for (i = 0; i < 256; i++) { + dev_priv->regs.pipe[0].palette[i] = + ((psb_intel_crtc->lut_r[i] + + psb_intel_crtc->lut_adj[i]) << 16) | + ((psb_intel_crtc->lut_g[i] + + psb_intel_crtc->lut_adj[i]) << 8) | + (psb_intel_crtc->lut_b[i] + + psb_intel_crtc->lut_adj[i]); + } + + } +} + +/** + * Sets the power management mode of the pipe and plane. + * + * This code should probably grow support for turning the cursor off and back + * on appropriately at the same time as we're turning the pipe off/on. + */ +static void cdv_intel_crtc_dpms(struct drm_crtc *crtc, int mode) +{ + struct drm_device *dev = crtc->dev; + struct drm_psb_private *dev_priv = dev->dev_private; + struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); + int pipe = psb_intel_crtc->pipe; + const struct psb_offset *map = &dev_priv->regmap[pipe]; + u32 temp; + + /* XXX: When our outputs are all unaware of DPMS modes other than off + * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. + */ + cdv_intel_disable_self_refresh(dev); + + switch (mode) { + case DRM_MODE_DPMS_ON: + case DRM_MODE_DPMS_STANDBY: + case DRM_MODE_DPMS_SUSPEND: + if (psb_intel_crtc->active) + break; + + psb_intel_crtc->active = true; + + /* Enable the DPLL */ + temp = REG_READ(map->dpll); + if ((temp & DPLL_VCO_ENABLE) == 0) { + REG_WRITE(map->dpll, temp); + REG_READ(map->dpll); + /* Wait for the clocks to stabilize. */ + udelay(150); + REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE); + REG_READ(map->dpll); + /* Wait for the clocks to stabilize. */ + udelay(150); + REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE); + REG_READ(map->dpll); + /* Wait for the clocks to stabilize. */ + udelay(150); + } + + /* Jim Bish - switch plan and pipe per scott */ + /* Enable the plane */ + temp = REG_READ(map->cntr); + if ((temp & DISPLAY_PLANE_ENABLE) == 0) { + REG_WRITE(map->cntr, + temp | DISPLAY_PLANE_ENABLE); + /* Flush the plane changes */ + REG_WRITE(map->base, REG_READ(map->base)); + } + + udelay(150); + + /* Enable the pipe */ + temp = REG_READ(map->conf); + if ((temp & PIPEACONF_ENABLE) == 0) + REG_WRITE(map->conf, temp | PIPEACONF_ENABLE); + + temp = REG_READ(map->status); + temp &= ~(0xFFFF); + temp |= PIPE_FIFO_UNDERRUN; + REG_WRITE(map->status, temp); + REG_READ(map->status); + + cdv_intel_crtc_load_lut(crtc); + + /* Give the overlay scaler a chance to enable + * if it's on this pipe */ + /* psb_intel_crtc_dpms_video(crtc, true); TODO */ + break; + case DRM_MODE_DPMS_OFF: + if (!psb_intel_crtc->active) + break; + + psb_intel_crtc->active = false; + + /* Give the overlay scaler a chance to disable + * if it's on this pipe */ + /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */ + + /* Disable the VGA plane that we never use */ + REG_WRITE(VGACNTRL, VGA_DISP_DISABLE); + + /* Jim Bish - changed pipe/plane here as well. */ + + drm_vblank_off(dev, pipe); + /* Wait for vblank for the disable to take effect */ + cdv_intel_wait_for_vblank(dev); + + /* Next, disable display pipes */ + temp = REG_READ(map->conf); + if ((temp & PIPEACONF_ENABLE) != 0) { + REG_WRITE(map->conf, temp & ~PIPEACONF_ENABLE); + REG_READ(map->conf); + } + + /* Wait for vblank for the disable to take effect. */ + cdv_intel_wait_for_vblank(dev); + + udelay(150); + + /* Disable display plane */ + temp = REG_READ(map->cntr); + if ((temp & DISPLAY_PLANE_ENABLE) != 0) { + REG_WRITE(map->cntr, + temp & ~DISPLAY_PLANE_ENABLE); + /* Flush the plane changes */ + REG_WRITE(map->base, REG_READ(map->base)); + REG_READ(map->base); + } + + temp = REG_READ(map->dpll); + if ((temp & DPLL_VCO_ENABLE) != 0) { + REG_WRITE(map->dpll, temp & ~DPLL_VCO_ENABLE); + REG_READ(map->dpll); + } + + /* Wait for the clocks to turn off. */ + udelay(150); + break; + } + cdv_intel_update_watermark(dev, crtc); + /*Set FIFO Watermarks*/ + REG_WRITE(DSPARB, 0x3F3E); +} + +static void cdv_intel_crtc_prepare(struct drm_crtc *crtc) +{ + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); +} + +static void cdv_intel_crtc_commit(struct drm_crtc *crtc) +{ + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); +} + +static bool cdv_intel_crtc_mode_fixup(struct drm_crtc *crtc, + const struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + return true; +} + + +/** + * Return the pipe currently connected to the panel fitter, + * or -1 if the panel fitter is not present or not in use + */ +static int cdv_intel_panel_fitter_pipe(struct drm_device *dev) +{ + u32 pfit_control; + + pfit_control = REG_READ(PFIT_CONTROL); + + /* See if the panel fitter is in use */ + if ((pfit_control & PFIT_ENABLE) == 0) + return -1; + return (pfit_control >> 29) & 0x3; +} + +static int cdv_intel_crtc_mode_set(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + int x, int y, + struct drm_framebuffer *old_fb) +{ + struct drm_device *dev = crtc->dev; + struct drm_psb_private *dev_priv = dev->dev_private; + struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); + int pipe = psb_intel_crtc->pipe; + const struct psb_offset *map = &dev_priv->regmap[pipe]; + int refclk; + struct cdv_intel_clock_t clock; + u32 dpll = 0, dspcntr, pipeconf; + bool ok; + bool is_crt = false, is_lvds = false, is_tv = false; + bool is_hdmi = false, is_dp = false; + struct drm_mode_config *mode_config = &dev->mode_config; + struct drm_connector *connector; + const struct cdv_intel_limit_t *limit; + u32 ddi_select = 0; + bool is_edp = false; + + list_for_each_entry(connector, &mode_config->connector_list, head) { + struct psb_intel_encoder *psb_intel_encoder = + psb_intel_attached_encoder(connector); + + if (!connector->encoder + || connector->encoder->crtc != crtc) + continue; + + ddi_select = psb_intel_encoder->ddi_select; + switch (psb_intel_encoder->type) { + case INTEL_OUTPUT_LVDS: + is_lvds = true; + break; + case INTEL_OUTPUT_TVOUT: + is_tv = true; + break; + case INTEL_OUTPUT_ANALOG: + is_crt = true; + break; + case INTEL_OUTPUT_HDMI: + is_hdmi = true; + break; + case INTEL_OUTPUT_DISPLAYPORT: + is_dp = true; + break; + case INTEL_OUTPUT_EDP: + is_edp = true; + break; + default: + DRM_ERROR("invalid output type.\n"); + return 0; + } + } + + if (dev_priv->dplla_96mhz) + /* low-end sku, 96/100 mhz */ + refclk = 96000; + else + /* high-end sku, 27/100 mhz */ + refclk = 27000; + if (is_dp || is_edp) { + /* + * Based on the spec the low-end SKU has only CRT/LVDS. So it is + * unnecessary to consider it for DP/eDP. + * On the high-end SKU, it will use the 27/100M reference clk + * for DP/eDP. When using SSC clock, the ref clk is 100MHz.Otherwise + * it will be 27MHz. From the VBIOS code it seems that the pipe A choose + * 27MHz for DP/eDP while the Pipe B chooses the 100MHz. + */ + if (pipe == 0) + refclk = 27000; + else + refclk = 100000; + } + + if (is_lvds && dev_priv->lvds_use_ssc) { + refclk = dev_priv->lvds_ssc_freq * 1000; + DRM_DEBUG_KMS("Use SSC reference clock %d Mhz\n", dev_priv->lvds_ssc_freq); + } + + drm_mode_debug_printmodeline(adjusted_mode); + + limit = cdv_intel_limit(crtc, refclk); + + ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, + &clock); + if (!ok) { + dev_err(dev->dev, "Couldn't find PLL settings for mode!\n"); + return 0; + } + + dpll = DPLL_VGA_MODE_DIS; + if (is_tv) { + /* XXX: just matching BIOS for now */ +/* dpll |= PLL_REF_INPUT_TVCLKINBC; */ + dpll |= 3; + } +/* dpll |= PLL_REF_INPUT_DREFCLK; */ + + if (is_dp || is_edp) { + cdv_intel_dp_set_m_n(crtc, mode, adjusted_mode); + } else { + REG_WRITE(PIPE_GMCH_DATA_M(pipe), 0); + REG_WRITE(PIPE_GMCH_DATA_N(pipe), 0); + REG_WRITE(PIPE_DP_LINK_M(pipe), 0); + REG_WRITE(PIPE_DP_LINK_N(pipe), 0); + } + + dpll |= DPLL_SYNCLOCK_ENABLE; +/* if (is_lvds) + dpll |= DPLLB_MODE_LVDS; + else + dpll |= DPLLB_MODE_DAC_SERIAL; */ + /* dpll |= (2 << 11); */ + + /* setup pipeconf */ + pipeconf = REG_READ(map->conf); + + pipeconf &= ~(PIPE_BPC_MASK); + if (is_edp) { + switch (dev_priv->edp.bpp) { + case 24: + pipeconf |= PIPE_8BPC; + break; + case 18: + pipeconf |= PIPE_6BPC; + break; + case 30: + pipeconf |= PIPE_10BPC; + break; + default: + pipeconf |= PIPE_8BPC; + break; + } + } else if (is_lvds) { + /* the BPC will be 6 if it is 18-bit LVDS panel */ + if ((REG_READ(LVDS) & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP) + pipeconf |= PIPE_8BPC; + else + pipeconf |= PIPE_6BPC; + } else + pipeconf |= PIPE_8BPC; + + /* Set up the display plane register */ + dspcntr = DISPPLANE_GAMMA_ENABLE; + + if (pipe == 0) + dspcntr |= DISPPLANE_SEL_PIPE_A; + else + dspcntr |= DISPPLANE_SEL_PIPE_B; + + dspcntr |= DISPLAY_PLANE_ENABLE; + pipeconf |= PIPEACONF_ENABLE; + + REG_WRITE(map->dpll, dpll | DPLL_VGA_MODE_DIS | DPLL_SYNCLOCK_ENABLE); + REG_READ(map->dpll); + + cdv_dpll_set_clock_cdv(dev, crtc, &clock, is_lvds, ddi_select); + + udelay(150); + + + /* The LVDS pin pair needs to be on before the DPLLs are enabled. + * This is an exception to the general rule that mode_set doesn't turn + * things on. + */ + if (is_lvds) { + u32 lvds = REG_READ(LVDS); + + lvds |= + LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | + LVDS_PIPEB_SELECT; + /* Set the B0-B3 data pairs corresponding to + * whether we're going to + * set the DPLLs for dual-channel mode or not. + */ + if (clock.p2 == 7) + lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; + else + lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); + + /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) + * appropriately here, but we need to look more + * thoroughly into how panels behave in the two modes. + */ + + REG_WRITE(LVDS, lvds); + REG_READ(LVDS); + } + + dpll |= DPLL_VCO_ENABLE; + + /* Disable the panel fitter if it was on our pipe */ + if (cdv_intel_panel_fitter_pipe(dev) == pipe) + REG_WRITE(PFIT_CONTROL, 0); + + DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); + drm_mode_debug_printmodeline(mode); + + REG_WRITE(map->dpll, + (REG_READ(map->dpll) & ~DPLL_LOCK) | DPLL_VCO_ENABLE); + REG_READ(map->dpll); + /* Wait for the clocks to stabilize. */ + udelay(150); /* 42 usec w/o calibration, 110 with. rounded up. */ + + if (!(REG_READ(map->dpll) & DPLL_LOCK)) { + dev_err(dev->dev, "Failed to get DPLL lock\n"); + return -EBUSY; + } + + { + int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock; + REG_WRITE(map->dpll_md, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) | ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT)); + } + + REG_WRITE(map->htotal, (adjusted_mode->crtc_hdisplay - 1) | + ((adjusted_mode->crtc_htotal - 1) << 16)); + REG_WRITE(map->hblank, (adjusted_mode->crtc_hblank_start - 1) | + ((adjusted_mode->crtc_hblank_end - 1) << 16)); + REG_WRITE(map->hsync, (adjusted_mode->crtc_hsync_start - 1) | + ((adjusted_mode->crtc_hsync_end - 1) << 16)); + REG_WRITE(map->vtotal, (adjusted_mode->crtc_vdisplay - 1) | + ((adjusted_mode->crtc_vtotal - 1) << 16)); + REG_WRITE(map->vblank, (adjusted_mode->crtc_vblank_start - 1) | + ((adjusted_mode->crtc_vblank_end - 1) << 16)); + REG_WRITE(map->vsync, (adjusted_mode->crtc_vsync_start - 1) | + ((adjusted_mode->crtc_vsync_end - 1) << 16)); + /* pipesrc and dspsize control the size that is scaled from, + * which should always be the user's requested size. + */ + REG_WRITE(map->size, + ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1)); + REG_WRITE(map->pos, 0); + REG_WRITE(map->src, + ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); + REG_WRITE(map->conf, pipeconf); + REG_READ(map->conf); + + cdv_intel_wait_for_vblank(dev); + + REG_WRITE(map->cntr, dspcntr); + + /* Flush the plane changes */ + { + struct drm_crtc_helper_funcs *crtc_funcs = + crtc->helper_private; + crtc_funcs->mode_set_base(crtc, x, y, old_fb); + } + + cdv_intel_wait_for_vblank(dev); + + return 0; +} + + +/** + * Save HW states of giving crtc + */ +static void cdv_intel_crtc_save(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_psb_private *dev_priv = dev->dev_private; + struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); + struct psb_intel_crtc_state *crtc_state = psb_intel_crtc->crtc_state; + const struct psb_offset *map = &dev_priv->regmap[psb_intel_crtc->pipe]; + uint32_t paletteReg; + int i; + + if (!crtc_state) { + dev_dbg(dev->dev, "No CRTC state found\n"); + return; + } + + crtc_state->saveDSPCNTR = REG_READ(map->cntr); + crtc_state->savePIPECONF = REG_READ(map->conf); + crtc_state->savePIPESRC = REG_READ(map->src); + crtc_state->saveFP0 = REG_READ(map->fp0); + crtc_state->saveFP1 = REG_READ(map->fp1); + crtc_state->saveDPLL = REG_READ(map->dpll); + crtc_state->saveHTOTAL = REG_READ(map->htotal); + crtc_state->saveHBLANK = REG_READ(map->hblank); + crtc_state->saveHSYNC = REG_READ(map->hsync); + crtc_state->saveVTOTAL = REG_READ(map->vtotal); + crtc_state->saveVBLANK = REG_READ(map->vblank); + crtc_state->saveVSYNC = REG_READ(map->vsync); + crtc_state->saveDSPSTRIDE = REG_READ(map->stride); + + /*NOTE: DSPSIZE DSPPOS only for psb*/ + crtc_state->saveDSPSIZE = REG_READ(map->size); + crtc_state->saveDSPPOS = REG_READ(map->pos); + + crtc_state->saveDSPBASE = REG_READ(map->base); + + DRM_DEBUG("(%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x)\n", + crtc_state->saveDSPCNTR, + crtc_state->savePIPECONF, + crtc_state->savePIPESRC, + crtc_state->saveFP0, + crtc_state->saveFP1, + crtc_state->saveDPLL, + crtc_state->saveHTOTAL, + crtc_state->saveHBLANK, + crtc_state->saveHSYNC, + crtc_state->saveVTOTAL, + crtc_state->saveVBLANK, + crtc_state->saveVSYNC, + crtc_state->saveDSPSTRIDE, + crtc_state->saveDSPSIZE, + crtc_state->saveDSPPOS, + crtc_state->saveDSPBASE + ); + + paletteReg = map->palette; + for (i = 0; i < 256; ++i) + crtc_state->savePalette[i] = REG_READ(paletteReg + (i << 2)); +} + +/** + * Restore HW states of giving crtc + */ +static void cdv_intel_crtc_restore(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_psb_private *dev_priv = dev->dev_private; + struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); + struct psb_intel_crtc_state *crtc_state = psb_intel_crtc->crtc_state; + const struct psb_offset *map = &dev_priv->regmap[psb_intel_crtc->pipe]; + uint32_t paletteReg; + int i; + + if (!crtc_state) { + dev_dbg(dev->dev, "No crtc state\n"); + return; + } + + DRM_DEBUG( + "current:(%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x)\n", + REG_READ(map->cntr), + REG_READ(map->conf), + REG_READ(map->src), + REG_READ(map->fp0), + REG_READ(map->fp1), + REG_READ(map->dpll), + REG_READ(map->htotal), + REG_READ(map->hblank), + REG_READ(map->hsync), + REG_READ(map->vtotal), + REG_READ(map->vblank), + REG_READ(map->vsync), + REG_READ(map->stride), + REG_READ(map->size), + REG_READ(map->pos), + REG_READ(map->base) + ); + + DRM_DEBUG( + "saved: (%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x)\n", + crtc_state->saveDSPCNTR, + crtc_state->savePIPECONF, + crtc_state->savePIPESRC, + crtc_state->saveFP0, + crtc_state->saveFP1, + crtc_state->saveDPLL, + crtc_state->saveHTOTAL, + crtc_state->saveHBLANK, + crtc_state->saveHSYNC, + crtc_state->saveVTOTAL, + crtc_state->saveVBLANK, + crtc_state->saveVSYNC, + crtc_state->saveDSPSTRIDE, + crtc_state->saveDSPSIZE, + crtc_state->saveDSPPOS, + crtc_state->saveDSPBASE + ); + + + if (crtc_state->saveDPLL & DPLL_VCO_ENABLE) { + REG_WRITE(map->dpll, + crtc_state->saveDPLL & ~DPLL_VCO_ENABLE); + REG_READ(map->dpll); + DRM_DEBUG("write dpll: %x\n", + REG_READ(map->dpll)); + udelay(150); + } + + REG_WRITE(map->fp0, crtc_state->saveFP0); + REG_READ(map->fp0); + + REG_WRITE(map->fp1, crtc_state->saveFP1); + REG_READ(map->fp1); + + REG_WRITE(map->dpll, crtc_state->saveDPLL); + REG_READ(map->dpll); + udelay(150); + + REG_WRITE(map->htotal, crtc_state->saveHTOTAL); + REG_WRITE(map->hblank, crtc_state->saveHBLANK); + REG_WRITE(map->hsync, crtc_state->saveHSYNC); + REG_WRITE(map->vtotal, crtc_state->saveVTOTAL); + REG_WRITE(map->vblank, crtc_state->saveVBLANK); + REG_WRITE(map->vsync, crtc_state->saveVSYNC); + REG_WRITE(map->stride, crtc_state->saveDSPSTRIDE); + + REG_WRITE(map->size, crtc_state->saveDSPSIZE); + REG_WRITE(map->pos, crtc_state->saveDSPPOS); + + REG_WRITE(map->src, crtc_state->savePIPESRC); + REG_WRITE(map->base, crtc_state->saveDSPBASE); + REG_WRITE(map->conf, crtc_state->savePIPECONF); + + cdv_intel_wait_for_vblank(dev); + + REG_WRITE(map->cntr, crtc_state->saveDSPCNTR); + REG_WRITE(map->base, crtc_state->saveDSPBASE); + + cdv_intel_wait_for_vblank(dev); + + paletteReg = map->palette; + for (i = 0; i < 256; ++i) + REG_WRITE(paletteReg + (i << 2), crtc_state->savePalette[i]); +} + +static int cdv_intel_crtc_cursor_set(struct drm_crtc *crtc, + struct drm_file *file_priv, + uint32_t handle, + uint32_t width, uint32_t height) +{ + struct drm_device *dev = crtc->dev; + struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); + int pipe = psb_intel_crtc->pipe; + uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR; + uint32_t base = (pipe == 0) ? CURABASE : CURBBASE; + uint32_t temp; + size_t addr = 0; + struct gtt_range *gt; + struct drm_gem_object *obj; + int ret = 0; + + /* if we want to turn of the cursor ignore width and height */ + if (!handle) { + /* turn off the cursor */ + temp = CURSOR_MODE_DISABLE; + + if (gma_power_begin(dev, false)) { + REG_WRITE(control, temp); + REG_WRITE(base, 0); + gma_power_end(dev); + } + + /* unpin the old GEM object */ + if (psb_intel_crtc->cursor_obj) { + gt = container_of(psb_intel_crtc->cursor_obj, + struct gtt_range, gem); + psb_gtt_unpin(gt); + drm_gem_object_unreference(psb_intel_crtc->cursor_obj); + psb_intel_crtc->cursor_obj = NULL; + } + + return 0; + } + + /* Currently we only support 64x64 cursors */ + if (width != 64 || height != 64) { + dev_dbg(dev->dev, "we currently only support 64x64 cursors\n"); + return -EINVAL; + } + + obj = drm_gem_object_lookup(dev, file_priv, handle); + if (!obj) + return -ENOENT; + + if (obj->size < width * height * 4) { + dev_dbg(dev->dev, "buffer is to small\n"); + ret = -ENOMEM; + goto unref_cursor; + } + + gt = container_of(obj, struct gtt_range, gem); + + /* Pin the memory into the GTT */ + ret = psb_gtt_pin(gt); + if (ret) { + dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle); + goto unref_cursor; + } + + addr = gt->offset; /* Or resource.start ??? */ + + psb_intel_crtc->cursor_addr = addr; + + temp = 0; + /* set the pipe for the cursor */ + temp |= (pipe << 28); + temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; + + if (gma_power_begin(dev, false)) { + REG_WRITE(control, temp); + REG_WRITE(base, addr); + gma_power_end(dev); + } + + /* unpin the old GEM object */ + if (psb_intel_crtc->cursor_obj) { + gt = container_of(psb_intel_crtc->cursor_obj, + struct gtt_range, gem); + psb_gtt_unpin(gt); + drm_gem_object_unreference(psb_intel_crtc->cursor_obj); + } + + psb_intel_crtc->cursor_obj = obj; + return ret; + +unref_cursor: + drm_gem_object_unreference(obj); + return ret; +} + +static int cdv_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) +{ + struct drm_device *dev = crtc->dev; + struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); + int pipe = psb_intel_crtc->pipe; + uint32_t temp = 0; + uint32_t adder; + + + if (x < 0) { + temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT); + x = -x; + } + if (y < 0) { + temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT); + y = -y; + } + + temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT); + temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT); + + adder = psb_intel_crtc->cursor_addr; + + if (gma_power_begin(dev, false)) { + REG_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp); + REG_WRITE((pipe == 0) ? CURABASE : CURBBASE, adder); + gma_power_end(dev); + } + return 0; +} + +static void cdv_intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, + u16 *green, u16 *blue, uint32_t start, uint32_t size) +{ + struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); + int i; + int end = (start + size > 256) ? 256 : start + size; + + for (i = start; i < end; i++) { + psb_intel_crtc->lut_r[i] = red[i] >> 8; + psb_intel_crtc->lut_g[i] = green[i] >> 8; + psb_intel_crtc->lut_b[i] = blue[i] >> 8; + } + + cdv_intel_crtc_load_lut(crtc); +} + +static int cdv_crtc_set_config(struct drm_mode_set *set) +{ + int ret = 0; + struct drm_device *dev = set->crtc->dev; + struct drm_psb_private *dev_priv = dev->dev_private; + + if (!dev_priv->rpm_enabled) + return drm_crtc_helper_set_config(set); + + pm_runtime_forbid(&dev->pdev->dev); + + ret = drm_crtc_helper_set_config(set); + + pm_runtime_allow(&dev->pdev->dev); + + return ret; +} + +/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */ + +/* FIXME: why are we using this, should it be cdv_ in this tree ? */ + +static void i8xx_clock(int refclk, struct cdv_intel_clock_t *clock) +{ + clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); + clock->p = clock->p1 * clock->p2; + clock->vco = refclk * clock->m / (clock->n + 2); + clock->dot = clock->vco / clock->p; +} + +/* Returns the clock of the currently programmed mode of the given pipe. */ +static int cdv_intel_crtc_clock_get(struct drm_device *dev, + struct drm_crtc *crtc) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); + int pipe = psb_intel_crtc->pipe; + const struct psb_offset *map = &dev_priv->regmap[pipe]; + u32 dpll; + u32 fp; + struct cdv_intel_clock_t clock; + bool is_lvds; + struct psb_pipe *p = &dev_priv->regs.pipe[pipe]; + + if (gma_power_begin(dev, false)) { + dpll = REG_READ(map->dpll); + if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) + fp = REG_READ(map->fp0); + else + fp = REG_READ(map->fp1); + is_lvds = (pipe == 1) && (REG_READ(LVDS) & LVDS_PORT_EN); + gma_power_end(dev); + } else { + dpll = p->dpll; + if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) + fp = p->fp0; + else + fp = p->fp1; + + is_lvds = (pipe == 1) && + (dev_priv->regs.psb.saveLVDS & LVDS_PORT_EN); + } + + clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT; + clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT; + clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT; + + if (is_lvds) { + clock.p1 = + ffs((dpll & + DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >> + DPLL_FPA01_P1_POST_DIV_SHIFT); + if (clock.p1 == 0) { + clock.p1 = 4; + dev_err(dev->dev, "PLL %d\n", dpll); + } + clock.p2 = 14; + + if ((dpll & PLL_REF_INPUT_MASK) == + PLLB_REF_INPUT_SPREADSPECTRUMIN) { + /* XXX: might not be 66MHz */ + i8xx_clock(66000, &clock); + } else + i8xx_clock(48000, &clock); + } else { + if (dpll & PLL_P1_DIVIDE_BY_TWO) + clock.p1 = 2; + else { + clock.p1 = + ((dpll & + DPLL_FPA01_P1_POST_DIV_MASK_I830) >> + DPLL_FPA01_P1_POST_DIV_SHIFT) + 2; + } + if (dpll & PLL_P2_DIVIDE_BY_4) + clock.p2 = 4; + else + clock.p2 = 2; + + i8xx_clock(48000, &clock); + } + + /* XXX: It would be nice to validate the clocks, but we can't reuse + * i830PllIsValid() because it relies on the xf86_config connector + * configuration being accurate, which it isn't necessarily. + */ + + return clock.dot; +} + +/** Returns the currently programmed mode of the given pipe. */ +struct drm_display_mode *cdv_intel_crtc_mode_get(struct drm_device *dev, + struct drm_crtc *crtc) +{ + struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); + int pipe = psb_intel_crtc->pipe; + struct drm_psb_private *dev_priv = dev->dev_private; + struct psb_pipe *p = &dev_priv->regs.pipe[pipe]; + const struct psb_offset *map = &dev_priv->regmap[pipe]; + struct drm_display_mode *mode; + int htot; + int hsync; + int vtot; + int vsync; + + if (gma_power_begin(dev, false)) { + htot = REG_READ(map->htotal); + hsync = REG_READ(map->hsync); + vtot = REG_READ(map->vtotal); + vsync = REG_READ(map->vsync); + gma_power_end(dev); + } else { + htot = p->htotal; + hsync = p->hsync; + vtot = p->vtotal; + vsync = p->vsync; + } + + mode = kzalloc(sizeof(*mode), GFP_KERNEL); + if (!mode) + return NULL; + + mode->clock = cdv_intel_crtc_clock_get(dev, crtc); + mode->hdisplay = (htot & 0xffff) + 1; + mode->htotal = ((htot & 0xffff0000) >> 16) + 1; + mode->hsync_start = (hsync & 0xffff) + 1; + mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1; + mode->vdisplay = (vtot & 0xffff) + 1; + mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1; + mode->vsync_start = (vsync & 0xffff) + 1; + mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1; + + drm_mode_set_name(mode); + drm_mode_set_crtcinfo(mode, 0); + + return mode; +} + +static void cdv_intel_crtc_destroy(struct drm_crtc *crtc) +{ + struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); + + kfree(psb_intel_crtc->crtc_state); + drm_crtc_cleanup(crtc); + kfree(psb_intel_crtc); +} + +static void cdv_intel_crtc_disable(struct drm_crtc *crtc) +{ + struct gtt_range *gt; + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + + crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); + + if (crtc->fb) { + gt = to_psb_fb(crtc->fb)->gtt; + psb_gtt_unpin(gt); + } +} + +const struct drm_crtc_helper_funcs cdv_intel_helper_funcs = { + .dpms = cdv_intel_crtc_dpms, + .mode_fixup = cdv_intel_crtc_mode_fixup, + .mode_set = cdv_intel_crtc_mode_set, + .mode_set_base = cdv_intel_pipe_set_base, + .prepare = cdv_intel_crtc_prepare, + .commit = cdv_intel_crtc_commit, + .disable = cdv_intel_crtc_disable, +}; + +const struct drm_crtc_funcs cdv_intel_crtc_funcs = { + .save = cdv_intel_crtc_save, + .restore = cdv_intel_crtc_restore, + .cursor_set = cdv_intel_crtc_cursor_set, + .cursor_move = cdv_intel_crtc_cursor_move, + .gamma_set = cdv_intel_crtc_gamma_set, + .set_config = cdv_crtc_set_config, + .destroy = cdv_intel_crtc_destroy, +}; |