diff options
Diffstat (limited to 'drivers/gpu/drm/gma500/cdv_device.c')
| -rw-r--r-- | drivers/gpu/drm/gma500/cdv_device.c | 658 |
1 files changed, 658 insertions, 0 deletions
diff --git a/drivers/gpu/drm/gma500/cdv_device.c b/drivers/gpu/drm/gma500/cdv_device.c new file mode 100644 index 0000000..23e14e9 --- /dev/null +++ b/drivers/gpu/drm/gma500/cdv_device.c @@ -0,0 +1,658 @@ +/************************************************************************** + * Copyright (c) 2011, Intel Corporation. + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + **************************************************************************/ + +#include <linux/backlight.h> +#include <drm/drmP.h> +#include <drm/drm.h> +#include <drm/gma_drm.h> +#include "psb_drv.h" +#include "psb_reg.h" +#include "psb_intel_reg.h" +#include "intel_bios.h" +#include "cdv_device.h" + +#define VGA_SR_INDEX 0x3c4 +#define VGA_SR_DATA 0x3c5 + +static void cdv_disable_vga(struct drm_device *dev) +{ + u8 sr1; + u32 vga_reg; + + vga_reg = VGACNTRL; + + outb(1, VGA_SR_INDEX); + sr1 = inb(VGA_SR_DATA); + outb(sr1 | 1<<5, VGA_SR_DATA); + udelay(300); + + REG_WRITE(vga_reg, VGA_DISP_DISABLE); + REG_READ(vga_reg); +} + +static int cdv_output_init(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + + drm_mode_create_scaling_mode_property(dev); + + cdv_disable_vga(dev); + + cdv_intel_crt_init(dev, &dev_priv->mode_dev); + cdv_intel_lvds_init(dev, &dev_priv->mode_dev); + + /* These bits indicate HDMI not SDVO on CDV */ + if (REG_READ(SDVOB) & SDVO_DETECTED) { + cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOB); + if (REG_READ(DP_B) & DP_DETECTED) + cdv_intel_dp_init(dev, &dev_priv->mode_dev, DP_B); + } + + if (REG_READ(SDVOC) & SDVO_DETECTED) { + cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOC); + if (REG_READ(DP_C) & DP_DETECTED) + cdv_intel_dp_init(dev, &dev_priv->mode_dev, DP_C); + } + return 0; +} + +#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE + +/* + * Cedartrail Backlght Interfaces + */ + +static struct backlight_device *cdv_backlight_device; + +static int cdv_backlight_combination_mode(struct drm_device *dev) +{ + return REG_READ(BLC_PWM_CTL2) & PWM_LEGACY_MODE; +} + +static u32 cdv_get_max_backlight(struct drm_device *dev) +{ + u32 max = REG_READ(BLC_PWM_CTL); + + if (max == 0) { + DRM_DEBUG_KMS("LVDS Panel PWM value is 0!\n"); + /* i915 does this, I believe which means that we should not + * smash PWM control as firmware will take control of it. */ + return 1; + } + + max >>= 16; + if (cdv_backlight_combination_mode(dev)) + max *= 0xff; + return max; +} + +static int cdv_get_brightness(struct backlight_device *bd) +{ + struct drm_device *dev = bl_get_data(bd); + u32 val = REG_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK; + + if (cdv_backlight_combination_mode(dev)) { + u8 lbpc; + + val &= ~1; + pci_read_config_byte(dev->pdev, 0xF4, &lbpc); + val *= lbpc; + } + return (val * 100)/cdv_get_max_backlight(dev); + +} + +static int cdv_set_brightness(struct backlight_device *bd) +{ + struct drm_device *dev = bl_get_data(bd); + int level = bd->props.brightness; + u32 blc_pwm_ctl; + + /* Percentage 1-100% being valid */ + if (level < 1) + level = 1; + + level *= cdv_get_max_backlight(dev); + level /= 100; + + if (cdv_backlight_combination_mode(dev)) { + u32 max = cdv_get_max_backlight(dev); + u8 lbpc; + + lbpc = level * 0xfe / max + 1; + level /= lbpc; + + pci_write_config_byte(dev->pdev, 0xF4, lbpc); + } + + blc_pwm_ctl = REG_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK; + REG_WRITE(BLC_PWM_CTL, (blc_pwm_ctl | + (level << BACKLIGHT_DUTY_CYCLE_SHIFT))); + return 0; +} + +static const struct backlight_ops cdv_ops = { + .get_brightness = cdv_get_brightness, + .update_status = cdv_set_brightness, +}; + +static int cdv_backlight_init(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + struct backlight_properties props; + + memset(&props, 0, sizeof(struct backlight_properties)); + props.max_brightness = 100; + props.type = BACKLIGHT_PLATFORM; + + cdv_backlight_device = backlight_device_register("psb-bl", + NULL, (void *)dev, &cdv_ops, &props); + if (IS_ERR(cdv_backlight_device)) + return PTR_ERR(cdv_backlight_device); + + cdv_backlight_device->props.brightness = + cdv_get_brightness(cdv_backlight_device); + backlight_update_status(cdv_backlight_device); + dev_priv->backlight_device = cdv_backlight_device; + dev_priv->backlight_enabled = true; + return 0; +} + +#endif + +/* + * Provide the Cedarview specific chip logic and low level methods + * for power management + * + * FIXME: we need to implement the apm/ospm base management bits + * for this and the MID devices. + */ + +static inline u32 CDV_MSG_READ32(uint port, uint offset) +{ + int mcr = (0x10<<24) | (port << 16) | (offset << 8); + uint32_t ret_val = 0; + struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0); + pci_write_config_dword(pci_root, 0xD0, mcr); + pci_read_config_dword(pci_root, 0xD4, &ret_val); + pci_dev_put(pci_root); + return ret_val; +} + +static inline void CDV_MSG_WRITE32(uint port, uint offset, u32 value) +{ + int mcr = (0x11<<24) | (port << 16) | (offset << 8) | 0xF0; + struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0); + pci_write_config_dword(pci_root, 0xD4, value); + pci_write_config_dword(pci_root, 0xD0, mcr); + pci_dev_put(pci_root); +} + +#define PSB_PM_SSC 0x20 +#define PSB_PM_SSS 0x30 +#define PSB_PWRGT_GFX_ON 0x02 +#define PSB_PWRGT_GFX_OFF 0x01 +#define PSB_PWRGT_GFX_D0 0x00 +#define PSB_PWRGT_GFX_D3 0x03 + +static void cdv_init_pm(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + u32 pwr_cnt; + int i; + + dev_priv->apm_base = CDV_MSG_READ32(PSB_PUNIT_PORT, + PSB_APMBA) & 0xFFFF; + dev_priv->ospm_base = CDV_MSG_READ32(PSB_PUNIT_PORT, + PSB_OSPMBA) & 0xFFFF; + + /* Power status */ + pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD); + + /* Enable the GPU */ + pwr_cnt &= ~PSB_PWRGT_GFX_MASK; + pwr_cnt |= PSB_PWRGT_GFX_ON; + outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD); + + /* Wait for the GPU power */ + for (i = 0; i < 5; i++) { + u32 pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS); + if ((pwr_sts & PSB_PWRGT_GFX_MASK) == 0) + return; + udelay(10); + } + dev_err(dev->dev, "GPU: power management timed out.\n"); +} + +static void cdv_errata(struct drm_device *dev) +{ + /* Disable bonus launch. + * CPU and GPU competes for memory and display misses updates and + * flickers. Worst with dual core, dual displays. + * + * Fixes were done to Win 7 gfx driver to disable a feature called + * Bonus Launch to work around the issue, by degrading + * performance. + */ + CDV_MSG_WRITE32(3, 0x30, 0x08027108); +} + +/** + * cdv_save_display_registers - save registers lost on suspend + * @dev: our DRM device + * + * Save the state we need in order to be able to restore the interface + * upon resume from suspend + */ +static int cdv_save_display_registers(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + struct psb_save_area *regs = &dev_priv->regs; + struct drm_connector *connector; + + dev_dbg(dev->dev, "Saving GPU registers.\n"); + + pci_read_config_byte(dev->pdev, 0xF4, ®s->cdv.saveLBB); + + regs->cdv.saveDSPCLK_GATE_D = REG_READ(DSPCLK_GATE_D); + regs->cdv.saveRAMCLK_GATE_D = REG_READ(RAMCLK_GATE_D); + + regs->cdv.saveDSPARB = REG_READ(DSPARB); + regs->cdv.saveDSPFW[0] = REG_READ(DSPFW1); + regs->cdv.saveDSPFW[1] = REG_READ(DSPFW2); + regs->cdv.saveDSPFW[2] = REG_READ(DSPFW3); + regs->cdv.saveDSPFW[3] = REG_READ(DSPFW4); + regs->cdv.saveDSPFW[4] = REG_READ(DSPFW5); + regs->cdv.saveDSPFW[5] = REG_READ(DSPFW6); + + regs->cdv.saveADPA = REG_READ(ADPA); + + regs->cdv.savePP_CONTROL = REG_READ(PP_CONTROL); + regs->cdv.savePFIT_PGM_RATIOS = REG_READ(PFIT_PGM_RATIOS); + regs->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL); + regs->saveBLC_PWM_CTL2 = REG_READ(BLC_PWM_CTL2); + regs->cdv.saveLVDS = REG_READ(LVDS); + + regs->cdv.savePFIT_CONTROL = REG_READ(PFIT_CONTROL); + + regs->cdv.savePP_ON_DELAYS = REG_READ(PP_ON_DELAYS); + regs->cdv.savePP_OFF_DELAYS = REG_READ(PP_OFF_DELAYS); + regs->cdv.savePP_CYCLE = REG_READ(PP_CYCLE); + + regs->cdv.saveVGACNTRL = REG_READ(VGACNTRL); + + regs->cdv.saveIER = REG_READ(PSB_INT_ENABLE_R); + regs->cdv.saveIMR = REG_READ(PSB_INT_MASK_R); + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) + connector->funcs->dpms(connector, DRM_MODE_DPMS_OFF); + + return 0; +} + +/** + * cdv_restore_display_registers - restore lost register state + * @dev: our DRM device + * + * Restore register state that was lost during suspend and resume. + * + * FIXME: review + */ +static int cdv_restore_display_registers(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + struct psb_save_area *regs = &dev_priv->regs; + struct drm_connector *connector; + u32 temp; + + pci_write_config_byte(dev->pdev, 0xF4, regs->cdv.saveLBB); + + REG_WRITE(DSPCLK_GATE_D, regs->cdv.saveDSPCLK_GATE_D); + REG_WRITE(RAMCLK_GATE_D, regs->cdv.saveRAMCLK_GATE_D); + + /* BIOS does below anyway */ + REG_WRITE(DPIO_CFG, 0); + REG_WRITE(DPIO_CFG, DPIO_MODE_SELECT_0 | DPIO_CMN_RESET_N); + + temp = REG_READ(DPLL_A); + if ((temp & DPLL_SYNCLOCK_ENABLE) == 0) { + REG_WRITE(DPLL_A, temp | DPLL_SYNCLOCK_ENABLE); + REG_READ(DPLL_A); + } + + temp = REG_READ(DPLL_B); + if ((temp & DPLL_SYNCLOCK_ENABLE) == 0) { + REG_WRITE(DPLL_B, temp | DPLL_SYNCLOCK_ENABLE); + REG_READ(DPLL_B); + } + + udelay(500); + + REG_WRITE(DSPFW1, regs->cdv.saveDSPFW[0]); + REG_WRITE(DSPFW2, regs->cdv.saveDSPFW[1]); + REG_WRITE(DSPFW3, regs->cdv.saveDSPFW[2]); + REG_WRITE(DSPFW4, regs->cdv.saveDSPFW[3]); + REG_WRITE(DSPFW5, regs->cdv.saveDSPFW[4]); + REG_WRITE(DSPFW6, regs->cdv.saveDSPFW[5]); + + REG_WRITE(DSPARB, regs->cdv.saveDSPARB); + REG_WRITE(ADPA, regs->cdv.saveADPA); + + REG_WRITE(BLC_PWM_CTL2, regs->saveBLC_PWM_CTL2); + REG_WRITE(LVDS, regs->cdv.saveLVDS); + REG_WRITE(PFIT_CONTROL, regs->cdv.savePFIT_CONTROL); + REG_WRITE(PFIT_PGM_RATIOS, regs->cdv.savePFIT_PGM_RATIOS); + REG_WRITE(BLC_PWM_CTL, regs->saveBLC_PWM_CTL); + REG_WRITE(PP_ON_DELAYS, regs->cdv.savePP_ON_DELAYS); + REG_WRITE(PP_OFF_DELAYS, regs->cdv.savePP_OFF_DELAYS); + REG_WRITE(PP_CYCLE, regs->cdv.savePP_CYCLE); + REG_WRITE(PP_CONTROL, regs->cdv.savePP_CONTROL); + + REG_WRITE(VGACNTRL, regs->cdv.saveVGACNTRL); + + REG_WRITE(PSB_INT_ENABLE_R, regs->cdv.saveIER); + REG_WRITE(PSB_INT_MASK_R, regs->cdv.saveIMR); + + /* Fix arbitration bug */ + cdv_errata(dev); + + drm_mode_config_reset(dev); + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) + connector->funcs->dpms(connector, DRM_MODE_DPMS_ON); + + /* Resume the modeset for every activated CRTC */ + drm_helper_resume_force_mode(dev); + return 0; +} + +static int cdv_power_down(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + u32 pwr_cnt, pwr_mask, pwr_sts; + int tries = 5; + + pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD); + pwr_cnt &= ~PSB_PWRGT_GFX_MASK; + pwr_cnt |= PSB_PWRGT_GFX_OFF; + pwr_mask = PSB_PWRGT_GFX_MASK; + + outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD); + + while (tries--) { + pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS); + if ((pwr_sts & pwr_mask) == PSB_PWRGT_GFX_D3) + return 0; + udelay(10); + } + return 0; +} + +static int cdv_power_up(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + u32 pwr_cnt, pwr_mask, pwr_sts; + int tries = 5; + + pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD); + pwr_cnt &= ~PSB_PWRGT_GFX_MASK; + pwr_cnt |= PSB_PWRGT_GFX_ON; + pwr_mask = PSB_PWRGT_GFX_MASK; + + outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD); + + while (tries--) { + pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS); + if ((pwr_sts & pwr_mask) == PSB_PWRGT_GFX_D0) + return 0; + udelay(10); + } + return 0; +} + +/* FIXME ? - shared with Poulsbo */ +static void cdv_get_core_freq(struct drm_device *dev) +{ + uint32_t clock; + struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0); + struct drm_psb_private *dev_priv = dev->dev_private; + + pci_write_config_dword(pci_root, 0xD0, 0xD0050300); + pci_read_config_dword(pci_root, 0xD4, &clock); + pci_dev_put(pci_root); + + switch (clock & 0x07) { + case 0: + dev_priv->core_freq = 100; + break; + case 1: + dev_priv->core_freq = 133; + break; + case 2: + dev_priv->core_freq = 150; + break; + case 3: + dev_priv->core_freq = 178; + break; + case 4: + dev_priv->core_freq = 200; + break; + case 5: + case 6: + case 7: + dev_priv->core_freq = 266; + break; + default: + dev_priv->core_freq = 0; + } +} + +static void cdv_hotplug_work_func(struct work_struct *work) +{ + struct drm_psb_private *dev_priv = container_of(work, struct drm_psb_private, + hotplug_work); + struct drm_device *dev = dev_priv->dev; + + /* Just fire off a uevent and let userspace tell us what to do */ + drm_helper_hpd_irq_event(dev); +} + +/* The core driver has received a hotplug IRQ. We are in IRQ context + so extract the needed information and kick off queued processing */ + +static int cdv_hotplug_event(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + schedule_work(&dev_priv->hotplug_work); + REG_WRITE(PORT_HOTPLUG_STAT, REG_READ(PORT_HOTPLUG_STAT)); + return 1; +} + +static void cdv_hotplug_enable(struct drm_device *dev, bool on) +{ + if (on) { + u32 hotplug = REG_READ(PORT_HOTPLUG_EN); + hotplug |= HDMIB_HOTPLUG_INT_EN | HDMIC_HOTPLUG_INT_EN | + HDMID_HOTPLUG_INT_EN | CRT_HOTPLUG_INT_EN; + REG_WRITE(PORT_HOTPLUG_EN, hotplug); + } else { + REG_WRITE(PORT_HOTPLUG_EN, 0); + REG_WRITE(PORT_HOTPLUG_STAT, REG_READ(PORT_HOTPLUG_STAT)); + } +} + +static const char *force_audio_names[] = { + "off", + "auto", + "on", +}; + +void cdv_intel_attach_force_audio_property(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_psb_private *dev_priv = dev->dev_private; + struct drm_property *prop; + int i; + + prop = dev_priv->force_audio_property; + if (prop == NULL) { + prop = drm_property_create(dev, DRM_MODE_PROP_ENUM, + "audio", + ARRAY_SIZE(force_audio_names)); + if (prop == NULL) + return; + + for (i = 0; i < ARRAY_SIZE(force_audio_names); i++) + drm_property_add_enum(prop, i, i-1, force_audio_names[i]); + + dev_priv->force_audio_property = prop; + } + drm_object_attach_property(&connector->base, prop, 0); +} + + +static const char *broadcast_rgb_names[] = { + "Full", + "Limited 16:235", +}; + +void cdv_intel_attach_broadcast_rgb_property(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_psb_private *dev_priv = dev->dev_private; + struct drm_property *prop; + int i; + + prop = dev_priv->broadcast_rgb_property; + if (prop == NULL) { + prop = drm_property_create(dev, DRM_MODE_PROP_ENUM, + "Broadcast RGB", + ARRAY_SIZE(broadcast_rgb_names)); + if (prop == NULL) + return; + + for (i = 0; i < ARRAY_SIZE(broadcast_rgb_names); i++) + drm_property_add_enum(prop, i, i, broadcast_rgb_names[i]); + + dev_priv->broadcast_rgb_property = prop; + } + + drm_object_attach_property(&connector->base, prop, 0); +} + +/* Cedarview */ +static const struct psb_offset cdv_regmap[2] = { + { + .fp0 = FPA0, + .fp1 = FPA1, + .cntr = DSPACNTR, + .conf = PIPEACONF, + .src = PIPEASRC, + .dpll = DPLL_A, + .dpll_md = DPLL_A_MD, + .htotal = HTOTAL_A, + .hblank = HBLANK_A, + .hsync = HSYNC_A, + .vtotal = VTOTAL_A, + .vblank = VBLANK_A, + .vsync = VSYNC_A, + .stride = DSPASTRIDE, + .size = DSPASIZE, + .pos = DSPAPOS, + .base = DSPABASE, + .surf = DSPASURF, + .addr = DSPABASE, + .status = PIPEASTAT, + .linoff = DSPALINOFF, + .tileoff = DSPATILEOFF, + .palette = PALETTE_A, + }, + { + .fp0 = FPB0, + .fp1 = FPB1, + .cntr = DSPBCNTR, + .conf = PIPEBCONF, + .src = PIPEBSRC, + .dpll = DPLL_B, + .dpll_md = DPLL_B_MD, + .htotal = HTOTAL_B, + .hblank = HBLANK_B, + .hsync = HSYNC_B, + .vtotal = VTOTAL_B, + .vblank = VBLANK_B, + .vsync = VSYNC_B, + .stride = DSPBSTRIDE, + .size = DSPBSIZE, + .pos = DSPBPOS, + .base = DSPBBASE, + .surf = DSPBSURF, + .addr = DSPBBASE, + .status = PIPEBSTAT, + .linoff = DSPBLINOFF, + .tileoff = DSPBTILEOFF, + .palette = PALETTE_B, + } +}; + +static int cdv_chip_setup(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + INIT_WORK(&dev_priv->hotplug_work, cdv_hotplug_work_func); + + if (pci_enable_msi(dev->pdev)) + dev_warn(dev->dev, "Enabling MSI failed!\n"); + dev_priv->regmap = cdv_regmap; + cdv_get_core_freq(dev); + psb_intel_opregion_init(dev); + psb_intel_init_bios(dev); + cdv_hotplug_enable(dev, false); + return 0; +} + +/* CDV is much like Poulsbo but has MID like SGX offsets and PM */ + +const struct psb_ops cdv_chip_ops = { + .name = "GMA3600/3650", + .accel_2d = 0, + .pipes = 2, + .crtcs = 2, + .hdmi_mask = (1 << 0) | (1 << 1), + .lvds_mask = (1 << 1), + .cursor_needs_phys = 0, + .sgx_offset = MRST_SGX_OFFSET, + .chip_setup = cdv_chip_setup, + .errata = cdv_errata, + + .crtc_helper = &cdv_intel_helper_funcs, + .crtc_funcs = &cdv_intel_crtc_funcs, + + .output_init = cdv_output_init, + .hotplug = cdv_hotplug_event, + .hotplug_enable = cdv_hotplug_enable, + +#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE + .backlight_init = cdv_backlight_init, +#endif + + .init_pm = cdv_init_pm, + .save_regs = cdv_save_display_registers, + .restore_regs = cdv_restore_display_registers, + .power_down = cdv_power_down, + .power_up = cdv_power_up, +}; |