fishHEADmaster

1 files changed, 120 insertions, 0 deletions

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h
new file mode 100644
index 0000000..81fe45f
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h
@@ -0,0 +1,120 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+
+#ifndef __fw_api_power_h__
+#define __fw_api_power_h__
+
+/* Power Management Commands, Responses, Notifications */
+
+/**
+ * enum iwl_scan_flags - masks for power table command flags
+ * @POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning off
+ *		receiver and transmitter. '0' - does not allow.
+ * @POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK: '0' Driver disables power management,
+ *		'1' Driver enables PM (use rest of parameters)
+ * @POWER_FLAGS_SKIP_OVER_DTIM_MSK: '0' PM have to walk up every DTIM,
+ *		'1' PM could sleep over DTIM till listen Interval.
+ * @POWER_FLAGS_ADVANCE_PM_ENA_MSK: Advanced PM (uAPSD) enable mask
+ * @POWER_FLAGS_LPRX_ENA_MSK: Low Power RX enable.
+*/
+enum iwl_power_flags {
+	POWER_FLAGS_POWER_SAVE_ENA_MSK		= BIT(0),
+	POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK	= BIT(1),
+	POWER_FLAGS_SKIP_OVER_DTIM_MSK		= BIT(2),
+	POWER_FLAGS_ADVANCE_PM_ENA_MSK		= BIT(9),
+	POWER_FLAGS_LPRX_ENA_MSK		= BIT(11),
+};
+
+#define IWL_POWER_VEC_SIZE 5
+
+/**
+ * struct iwl_powertable_cmd - Power Table Command
+ * POWER_TABLE_CMD = 0x77 (command, has simple generic response)
+ *
+ * @flags:		Power table command flags from POWER_FLAGS_*
+ * @keep_alive_seconds: Keep alive period in seconds. Default - 25 sec.
+ *			Minimum allowed:- 3 * DTIM. Keep alive period must be
+ *			set regardless of power scheme or current power state.
+ *			FW use this value also when PM is disabled.
+ * @rx_data_timeout:    Minimum time (usec) from last Rx packet for AM to
+ *			PSM transition - legacy PM
+ * @tx_data_timeout:    Minimum time (usec) from last Tx packet for AM to
+ *			PSM transition - legacy PM
+ * @sleep_interval:	not in use
+ * @keep_alive_beacons:	not in use
+ * @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled.
+ *			Default: 80dbm
+ */
+struct iwl_powertable_cmd {
+	/* PM_POWER_TABLE_CMD_API_S_VER_5 */
+	__le16 flags;
+	u8 keep_alive_seconds;
+	u8 debug_flags;
+	__le32 rx_data_timeout;
+	__le32 tx_data_timeout;
+	__le32 sleep_interval[IWL_POWER_VEC_SIZE];
+	__le32 keep_alive_beacons;
+	__le32 lprx_rssi_threshold;
+} __packed;
+
+#endif