fishHEADmaster

1 files changed, 532 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath9k/wow.c b/drivers/net/wireless/ath/ath9k/wow.c
new file mode 100644
index 0000000..9f85630
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/wow.c
@@ -0,0 +1,532 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/export.h>
+#include "ath9k.h"
+#include "reg.h"
+#include "hw-ops.h"
+
+const char *ath9k_hw_wow_event_to_string(u32 wow_event)
+{
+	if (wow_event & AH_WOW_MAGIC_PATTERN_EN)
+		return "Magic pattern";
+	if (wow_event & AH_WOW_USER_PATTERN_EN)
+		return "User pattern";
+	if (wow_event & AH_WOW_LINK_CHANGE)
+		return "Link change";
+	if (wow_event & AH_WOW_BEACON_MISS)
+		return "Beacon miss";
+
+	return  "unknown reason";
+}
+EXPORT_SYMBOL(ath9k_hw_wow_event_to_string);
+
+static void ath9k_hw_config_serdes_wow_sleep(struct ath_hw *ah)
+{
+	int i;
+
+	for (i = 0; i < ah->iniPcieSerdesWow.ia_rows; i++)
+		REG_WRITE(ah, INI_RA(&ah->iniPcieSerdesWow, i, 0),
+			  INI_RA(&ah->iniPcieSerdesWow, i, 1));
+
+	usleep_range(1000, 1500);
+}
+
+static void ath9k_hw_set_powermode_wow_sleep(struct ath_hw *ah)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+
+	REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV);
+
+	/* set rx disable bit */
+	REG_WRITE(ah, AR_CR, AR_CR_RXD);
+
+	if (!ath9k_hw_wait(ah, AR_CR, AR_CR_RXE, 0, AH_WAIT_TIMEOUT)) {
+		ath_err(common, "Failed to stop Rx DMA in 10ms AR_CR=0x%08x AR_DIAG_SW=0x%08x\n",
+			REG_READ(ah, AR_CR), REG_READ(ah, AR_DIAG_SW));
+		return;
+	} else {
+		if (!AR_SREV_9300_20_OR_LATER(ah))
+			REG_WRITE(ah, AR_RXDP, 0x0);
+	}
+
+	/* AR9280 WoW has sleep issue, do not set it to sleep */
+	if (AR_SREV_9280_20(ah))
+		return;
+
+	REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_ON_INT);
+}
+
+static void ath9k_wow_create_keep_alive_pattern(struct ath_hw *ah)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+	u8 sta_mac_addr[ETH_ALEN], ap_mac_addr[ETH_ALEN];
+	u32 ctl[13] = {0};
+	u32 data_word[KAL_NUM_DATA_WORDS];
+	u8 i;
+	u32 wow_ka_data_word0;
+
+	memcpy(sta_mac_addr, common->macaddr, ETH_ALEN);
+	memcpy(ap_mac_addr, common->curbssid, ETH_ALEN);
+
+	/* set the transmit buffer */
+	ctl[0] = (KAL_FRAME_LEN | (MAX_RATE_POWER << 16));
+
+	if (!(AR_SREV_9300_20_OR_LATER(ah)))
+		ctl[0] += (KAL_ANTENNA_MODE << 25);
+
+	ctl[1] = 0;
+	ctl[3] = 0xb;	/* OFDM_6M hardware value for this rate */
+	ctl[4] = 0;
+	ctl[7] = (ah->txchainmask) << 2;
+
+	if (AR_SREV_9300_20_OR_LATER(ah))
+		ctl[2] = 0xf << 16; /* tx_tries 0 */
+	else
+		ctl[2] = 0x7 << 16; /* tx_tries 0 */
+
+
+	for (i = 0; i < KAL_NUM_DESC_WORDS; i++)
+		REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);
+
+	/* for AR9300 family 13 descriptor words */
+	if (AR_SREV_9300_20_OR_LATER(ah))
+		REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);
+
+	data_word[0] = (KAL_FRAME_TYPE << 2) | (KAL_FRAME_SUB_TYPE << 4) |
+		       (KAL_TO_DS << 8) | (KAL_DURATION_ID << 16);
+	data_word[1] = (ap_mac_addr[3] << 24) | (ap_mac_addr[2] << 16) |
+		       (ap_mac_addr[1] << 8) | (ap_mac_addr[0]);
+	data_word[2] = (sta_mac_addr[1] << 24) | (sta_mac_addr[0] << 16) |
+		       (ap_mac_addr[5] << 8) | (ap_mac_addr[4]);
+	data_word[3] = (sta_mac_addr[5] << 24) | (sta_mac_addr[4] << 16) |
+		       (sta_mac_addr[3] << 8) | (sta_mac_addr[2]);
+	data_word[4] = (ap_mac_addr[3] << 24) | (ap_mac_addr[2] << 16) |
+		       (ap_mac_addr[1] << 8) | (ap_mac_addr[0]);
+	data_word[5] = (ap_mac_addr[5] << 8) | (ap_mac_addr[4]);
+
+	if (AR_SREV_9462_20(ah)) {
+		/* AR9462 2.0 has an extra descriptor word (time based
+		 * discard) compared to other chips */
+		REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + (12 * 4)), 0);
+		wow_ka_data_word0 = AR_WOW_TXBUF(13);
+	} else {
+		wow_ka_data_word0 = AR_WOW_TXBUF(12);
+	}
+
+	for (i = 0; i < KAL_NUM_DATA_WORDS; i++)
+		REG_WRITE(ah, (wow_ka_data_word0 + i*4), data_word[i]);
+
+}
+
+void ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern,
+				u8 *user_mask, int pattern_count,
+				int pattern_len)
+{
+	int i;
+	u32 pattern_val, mask_val;
+	u32 set, clr;
+
+	/* FIXME: should check count by querying the hardware capability */
+	if (pattern_count >= MAX_NUM_PATTERN)
+		return;
+
+	REG_SET_BIT(ah, AR_WOW_PATTERN, BIT(pattern_count));
+
+	/* set the registers for pattern */
+	for (i = 0; i < MAX_PATTERN_SIZE; i += 4) {
+		memcpy(&pattern_val, user_pattern, 4);
+		REG_WRITE(ah, (AR_WOW_TB_PATTERN(pattern_count) + i),
+			  pattern_val);
+		user_pattern += 4;
+	}
+
+	/* set the registers for mask */
+	for (i = 0; i < MAX_PATTERN_MASK_SIZE; i += 4) {
+		memcpy(&mask_val, user_mask, 4);
+		REG_WRITE(ah, (AR_WOW_TB_MASK(pattern_count) + i), mask_val);
+		user_mask += 4;
+	}
+
+	/* set the pattern length to be matched
+	 *
+	 * AR_WOW_LENGTH1_REG1
+	 * bit 31:24 pattern 0 length
+	 * bit 23:16 pattern 1 length
+	 * bit 15:8 pattern 2 length
+	 * bit 7:0 pattern 3 length
+	 *
+	 * AR_WOW_LENGTH1_REG2
+	 * bit 31:24 pattern 4 length
+	 * bit 23:16 pattern 5 length
+	 * bit 15:8 pattern 6 length
+	 * bit 7:0 pattern 7 length
+	 *
+	 * the below logic writes out the new
+	 * pattern length for the corresponding
+	 * pattern_count, while masking out the
+	 * other fields
+	 */
+
+	ah->wow_event_mask |= BIT(pattern_count + AR_WOW_PAT_FOUND_SHIFT);
+
+	if (!AR_SREV_9285_12_OR_LATER(ah))
+		return;
+
+	if (pattern_count < 4) {
+		/* Pattern 0-3 uses AR_WOW_LENGTH1 register */
+		set = (pattern_len & AR_WOW_LENGTH_MAX) <<
+		       AR_WOW_LEN1_SHIFT(pattern_count);
+		clr = AR_WOW_LENGTH1_MASK(pattern_count);
+		REG_RMW(ah, AR_WOW_LENGTH1, set, clr);
+	} else {
+		/* Pattern 4-7 uses AR_WOW_LENGTH2 register */
+		set = (pattern_len & AR_WOW_LENGTH_MAX) <<
+		       AR_WOW_LEN2_SHIFT(pattern_count);
+		clr = AR_WOW_LENGTH2_MASK(pattern_count);
+		REG_RMW(ah, AR_WOW_LENGTH2, set, clr);
+	}
+
+}
+EXPORT_SYMBOL(ath9k_hw_wow_apply_pattern);
+
+u32 ath9k_hw_wow_wakeup(struct ath_hw *ah)
+{
+	u32 wow_status = 0;
+	u32 val = 0, rval;
+	/*
+	 * read the WoW status register to know
+	 * the wakeup reason
+	 */
+	rval = REG_READ(ah, AR_WOW_PATTERN);
+	val = AR_WOW_STATUS(rval);
+
+	/*
+	 * mask only the WoW events that we have enabled. Sometimes
+	 * we have spurious WoW events from the AR_WOW_PATTERN
+	 * register. This mask will clean it up.
+	 */
+
+	val &= ah->wow_event_mask;
+
+	if (val) {
+
+		if (val & AR_WOW_MAGIC_PAT_FOUND)
+			wow_status |= AH_WOW_MAGIC_PATTERN_EN;
+
+		if (AR_WOW_PATTERN_FOUND(val))
+			wow_status |= AH_WOW_USER_PATTERN_EN;
+
+		if (val & AR_WOW_KEEP_ALIVE_FAIL)
+			wow_status |= AH_WOW_LINK_CHANGE;
+
+		if (val & AR_WOW_BEACON_FAIL)
+			wow_status |= AH_WOW_BEACON_MISS;
+
+	}
+
+	/*
+	 * set and clear WOW_PME_CLEAR registers for the chip to
+	 * generate next wow signal.
+	 * disable D3 before accessing other registers ?
+	 */
+
+	/* do we need to check the bit value 0x01000000 (7-10) ?? */
+	REG_RMW(ah, AR_PCIE_PM_CTRL, AR_PMCTRL_WOW_PME_CLR,
+		AR_PMCTRL_PWR_STATE_D1D3);
+
+	/*
+	 * clear all events
+	 */
+	REG_WRITE(ah, AR_WOW_PATTERN,
+		  AR_WOW_CLEAR_EVENTS(REG_READ(ah, AR_WOW_PATTERN)));
+
+	/*
+	 * tie reset register for AR9002 family of chipsets
+	 * NB: not tieing it back might have some repurcussions.
+	 */
+
+	if (!AR_SREV_9300_20_OR_LATER(ah)) {
+		REG_SET_BIT(ah, AR_WA, AR_WA_UNTIE_RESET_EN |
+			    AR_WA_POR_SHORT | AR_WA_RESET_EN);
+	}
+
+
+	/*
+	 * restore the beacon threshold to init value
+	 */
+	REG_WRITE(ah, AR_RSSI_THR, INIT_RSSI_THR);
+
+	/*
+	 * Restore the way the PCI-E reset, Power-On-Reset, external
+	 * PCIE_POR_SHORT pins are tied to its original value.
+	 * Previously just before WoW sleep, we untie the PCI-E
+	 * reset to our Chip's Power On Reset so that any PCI-E
+	 * reset from the bus will not reset our chip
+	 */
+
+	if (AR_SREV_9280_20_OR_LATER(ah) && ah->is_pciexpress)
+		ath9k_hw_configpcipowersave(ah, false);
+
+	ah->wow_event_mask = 0;
+
+	return wow_status;
+}
+EXPORT_SYMBOL(ath9k_hw_wow_wakeup);
+
+void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable)
+{
+	u32 wow_event_mask;
+	u32 set, clr;
+
+	/*
+	 * wow_event_mask is a mask to the AR_WOW_PATTERN register to
+	 * indicate which WoW events we have enabled. The WoW events
+	 * are from the 'pattern_enable' in this function and
+	 * 'pattern_count' of ath9k_hw_wow_apply_pattern()
+	 */
+
+	wow_event_mask = ah->wow_event_mask;
+
+	/*
+	 * Untie Power-on-Reset from the PCI-E-Reset. When we are in
+	 * WOW sleep, we do want the Reset from the PCI-E to disturb
+	 * our hw state
+	 */
+
+	if (ah->is_pciexpress) {
+
+		/*
+		 * we need to untie the internal POR (power-on-reset)
+		 * to the external PCI-E reset. We also need to tie
+		 * the PCI-E Phy reset to the PCI-E reset.
+		 */
+
+		if (AR_SREV_9300_20_OR_LATER(ah)) {
+			set = AR_WA_RESET_EN | AR_WA_POR_SHORT;
+			clr = AR_WA_UNTIE_RESET_EN | AR_WA_D3_L1_DISABLE;
+			REG_RMW(ah, AR_WA, set, clr);
+		} else {
+			if (AR_SREV_9285(ah) || AR_SREV_9287(ah))
+				set = AR9285_WA_DEFAULT;
+			else
+				set = AR9280_WA_DEFAULT;
+
+			/*
+			 * In AR9280 and AR9285, bit 14 in WA register
+			 * (disable L1) should only be set when device
+			 * enters D3 state and be cleared when device
+			 * comes back to D0
+			 */
+
+			if (ah->config.pcie_waen & AR_WA_D3_L1_DISABLE)
+				set |= AR_WA_D3_L1_DISABLE;
+
+			clr = AR_WA_UNTIE_RESET_EN;
+			set |= AR_WA_RESET_EN | AR_WA_POR_SHORT;
+			REG_RMW(ah, AR_WA, set, clr);
+
+			/*
+			 * for WoW sleep, we reprogram the SerDes so that the
+			 * PLL and CLK REQ are both enabled. This uses more
+			 * power but otherwise WoW sleep is unstable and the
+			 * chip may disappear.
+			 */
+
+			if (AR_SREV_9285_12_OR_LATER(ah))
+				ath9k_hw_config_serdes_wow_sleep(ah);
+
+		}
+	}
+
+	/*
+	 * set the power states appropriately and enable PME
+	 */
+	set = AR_PMCTRL_HOST_PME_EN | AR_PMCTRL_PWR_PM_CTRL_ENA |
+	      AR_PMCTRL_AUX_PWR_DET | AR_PMCTRL_WOW_PME_CLR;
+
+	/*
+	 * set and clear WOW_PME_CLEAR registers for the chip
+	 * to generate next wow signal.
+	 */
+	REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);
+	clr = AR_PMCTRL_WOW_PME_CLR;
+	REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);
+
+	/*
+	 * Setup for:
+	 *	- beacon misses
+	 *	- magic pattern
+	 *	- keep alive timeout
+	 *	- pattern matching
+	 */
+
+	/*
+	 * Program default values for pattern backoff, aifs/slot/KAL count,
+	 * beacon miss timeout, KAL timeout, etc.
+	 */
+
+	set = AR_WOW_BACK_OFF_SHIFT(AR_WOW_PAT_BACKOFF);
+	REG_SET_BIT(ah, AR_WOW_PATTERN, set);
+
+	set = AR_WOW_AIFS_CNT(AR_WOW_CNT_AIFS_CNT) |
+	      AR_WOW_SLOT_CNT(AR_WOW_CNT_SLOT_CNT) |
+	      AR_WOW_KEEP_ALIVE_CNT(AR_WOW_CNT_KA_CNT);
+	REG_SET_BIT(ah, AR_WOW_COUNT, set);
+
+	if (pattern_enable & AH_WOW_BEACON_MISS)
+		set = AR_WOW_BEACON_TIMO;
+	/* We are not using beacon miss, program a large value */
+	else
+		set = AR_WOW_BEACON_TIMO_MAX;
+
+	REG_WRITE(ah, AR_WOW_BCN_TIMO, set);
+
+	/*
+	 * Keep alive timo in ms except AR9280
+	 */
+	if (!pattern_enable || AR_SREV_9280(ah))
+		set = AR_WOW_KEEP_ALIVE_NEVER;
+	else
+		set = KAL_TIMEOUT * 32;
+
+	REG_WRITE(ah, AR_WOW_KEEP_ALIVE_TIMO, set);
+
+	/*
+	 * Keep alive delay in us. based on 'power on clock',
+	 * therefore in usec
+	 */
+	set = KAL_DELAY * 1000;
+	REG_WRITE(ah, AR_WOW_KEEP_ALIVE_DELAY, set);
+
+	/*
+	 * Create keep alive pattern to respond to beacons
+	 */
+	ath9k_wow_create_keep_alive_pattern(ah);
+
+	/*
+	 * Configure MAC WoW Registers
+	 */
+
+	set = 0;
+	/* Send keep alive timeouts anyway */
+	clr = AR_WOW_KEEP_ALIVE_AUTO_DIS;
+
+	if (pattern_enable & AH_WOW_LINK_CHANGE)
+		wow_event_mask |= AR_WOW_KEEP_ALIVE_FAIL;
+	else
+		set = AR_WOW_KEEP_ALIVE_FAIL_DIS;
+
+	/*
+	 * FIXME: For now disable keep alive frame
+	 * failure. This seems to sometimes trigger
+	 * unnecessary wake up with AR9485 chipsets.
+	 */
+	set = AR_WOW_KEEP_ALIVE_FAIL_DIS;
+
+	REG_RMW(ah, AR_WOW_KEEP_ALIVE, set, clr);
+
+
+	/*
+	 * we are relying on a bmiss failure. ensure we have
+	 * enough threshold to prevent false positives
+	 */
+	REG_RMW_FIELD(ah, AR_RSSI_THR, AR_RSSI_THR_BM_THR,
+		      AR_WOW_BMISSTHRESHOLD);
+
+	set = 0;
+	clr = 0;
+
+	if (pattern_enable & AH_WOW_BEACON_MISS) {
+		set = AR_WOW_BEACON_FAIL_EN;
+		wow_event_mask |= AR_WOW_BEACON_FAIL;
+	} else {
+		clr = AR_WOW_BEACON_FAIL_EN;
+	}
+
+	REG_RMW(ah, AR_WOW_BCN_EN, set, clr);
+
+	set = 0;
+	clr = 0;
+	/*
+	 * Enable the magic packet registers
+	 */
+	if (pattern_enable & AH_WOW_MAGIC_PATTERN_EN) {
+		set = AR_WOW_MAGIC_EN;
+		wow_event_mask |= AR_WOW_MAGIC_PAT_FOUND;
+	} else {
+		clr = AR_WOW_MAGIC_EN;
+	}
+	set |= AR_WOW_MAC_INTR_EN;
+	REG_RMW(ah, AR_WOW_PATTERN, set, clr);
+
+	/*
+	 * For AR9285 and later version of chipsets
+	 * enable WoW pattern match for packets less
+	 * than 256 bytes for all patterns
+	 */
+	if (AR_SREV_9285_12_OR_LATER(ah))
+		REG_WRITE(ah, AR_WOW_PATTERN_MATCH_LT_256B,
+			  AR_WOW_PATTERN_SUPPORTED);
+
+	/*
+	 * Set the power states appropriately and enable PME
+	 */
+	clr = 0;
+	set = AR_PMCTRL_PWR_STATE_D1D3 | AR_PMCTRL_HOST_PME_EN |
+	      AR_PMCTRL_PWR_PM_CTRL_ENA;
+	/*
+	 * This is needed for AR9300 chipsets to wake-up
+	 * the host.
+	 */
+	if (AR_SREV_9300_20_OR_LATER(ah))
+		clr = AR_PCIE_PM_CTRL_ENA;
+
+	REG_RMW(ah, AR_PCIE_PM_CTRL, set, clr);
+
+	if (AR_SREV_9462(ah) || AR_SREV_9565(ah)) {
+		/*
+		 * this is needed to prevent the chip waking up
+		 * the host within 3-4 seconds with certain
+		 * platform/BIOS. The fix is to enable
+		 * D1 & D3 to match original definition and
+		 * also match the OTP value. Anyway this
+		 * is more related to SW WOW.
+		 */
+		clr = AR_PMCTRL_PWR_STATE_D1D3;
+		REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);
+
+		set = AR_PMCTRL_PWR_STATE_D1D3_REAL;
+		REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);
+	}
+
+
+
+	REG_CLR_BIT(ah, AR_STA_ID1, AR_STA_ID1_PRESERVE_SEQNUM);
+
+	if (AR_SREV_9300_20_OR_LATER(ah)) {
+		/* to bring down WOW power low margin */
+		set = BIT(13);
+		REG_SET_BIT(ah, AR_PCIE_PHY_REG3, set);
+		/* HW WoW */
+		clr = BIT(5);
+		REG_CLR_BIT(ah, AR_PCU_MISC_MODE3, clr);
+	}
+
+	ath9k_hw_set_powermode_wow_sleep(ah);
+	ah->wow_event_mask = wow_event_mask;
+}
+EXPORT_SYMBOL(ath9k_hw_wow_enable);