fishHEADmaster

1 files changed, 1552 insertions, 0 deletions

diff --git a/drivers/gpu/drm/vmwgfx/svga_reg.h b/drivers/gpu/drm/vmwgfx/svga_reg.h
new file mode 100644
index 0000000..01f63cb
--- /dev/null
+++ b/drivers/gpu/drm/vmwgfx/svga_reg.h
@@ -0,0 +1,1552 @@
+/**********************************************************
+ * Copyright 1998-2009 VMware, Inc.  All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy,
+ * modify, merge, publish, distribute, sublicense, and/or sell copies
+ * of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ **********************************************************/
+
+/*
+ * svga_reg.h --
+ *
+ *    Virtual hardware definitions for the VMware SVGA II device.
+ */
+
+#ifndef _SVGA_REG_H_
+#define _SVGA_REG_H_
+
+/*
+ * PCI device IDs.
+ */
+#define PCI_VENDOR_ID_VMWARE            0x15AD
+#define PCI_DEVICE_ID_VMWARE_SVGA2      0x0405
+
+/*
+ * SVGA_REG_ENABLE bit definitions.
+ */
+#define SVGA_REG_ENABLE_DISABLE     0
+#define SVGA_REG_ENABLE_ENABLE      1
+#define SVGA_REG_ENABLE_HIDE        2
+#define SVGA_REG_ENABLE_ENABLE_HIDE (SVGA_REG_ENABLE_ENABLE |\
+				     SVGA_REG_ENABLE_HIDE)
+
+/*
+ * Legal values for the SVGA_REG_CURSOR_ON register in old-fashioned
+ * cursor bypass mode. This is still supported, but no new guest
+ * drivers should use it.
+ */
+#define SVGA_CURSOR_ON_HIDE            0x0   /* Must be 0 to maintain backward compatibility */
+#define SVGA_CURSOR_ON_SHOW            0x1   /* Must be 1 to maintain backward compatibility */
+#define SVGA_CURSOR_ON_REMOVE_FROM_FB  0x2   /* Remove the cursor from the framebuffer because we need to see what's under it */
+#define SVGA_CURSOR_ON_RESTORE_TO_FB   0x3   /* Put the cursor back in the framebuffer so the user can see it */
+
+/*
+ * The maximum framebuffer size that can traced for e.g. guests in VESA mode.
+ * The changeMap in the monitor is proportional to this number. Therefore, we'd
+ * like to keep it as small as possible to reduce monitor overhead (using
+ * SVGA_VRAM_MAX_SIZE for this increases the size of the shared area by over
+ * 4k!).
+ *
+ * NB: For compatibility reasons, this value must be greater than 0xff0000.
+ *     See bug 335072.
+ */
+#define SVGA_FB_MAX_TRACEABLE_SIZE      0x1000000
+
+#define SVGA_MAX_PSEUDOCOLOR_DEPTH      8
+#define SVGA_MAX_PSEUDOCOLORS           (1 << SVGA_MAX_PSEUDOCOLOR_DEPTH)
+#define SVGA_NUM_PALETTE_REGS           (3 * SVGA_MAX_PSEUDOCOLORS)
+
+#define SVGA_MAGIC         0x900000UL
+#define SVGA_MAKE_ID(ver)  (SVGA_MAGIC << 8 | (ver))
+
+/* Version 2 let the address of the frame buffer be unsigned on Win32 */
+#define SVGA_VERSION_2     2
+#define SVGA_ID_2          SVGA_MAKE_ID(SVGA_VERSION_2)
+
+/* Version 1 has new registers starting with SVGA_REG_CAPABILITIES so
+   PALETTE_BASE has moved */
+#define SVGA_VERSION_1     1
+#define SVGA_ID_1          SVGA_MAKE_ID(SVGA_VERSION_1)
+
+/* Version 0 is the initial version */
+#define SVGA_VERSION_0     0
+#define SVGA_ID_0          SVGA_MAKE_ID(SVGA_VERSION_0)
+
+/* "Invalid" value for all SVGA IDs. (Version ID, screen object ID, surface ID...) */
+#define SVGA_ID_INVALID    0xFFFFFFFF
+
+/* Port offsets, relative to BAR0 */
+#define SVGA_INDEX_PORT         0x0
+#define SVGA_VALUE_PORT         0x1
+#define SVGA_BIOS_PORT          0x2
+#define SVGA_IRQSTATUS_PORT     0x8
+
+/*
+ * Interrupt source flags for IRQSTATUS_PORT and IRQMASK.
+ *
+ * Interrupts are only supported when the
+ * SVGA_CAP_IRQMASK capability is present.
+ */
+#define SVGA_IRQFLAG_ANY_FENCE            0x1    /* Any fence was passed */
+#define SVGA_IRQFLAG_FIFO_PROGRESS        0x2    /* Made forward progress in the FIFO */
+#define SVGA_IRQFLAG_FENCE_GOAL           0x4    /* SVGA_FIFO_FENCE_GOAL reached */
+
+/*
+ * Registers
+ */
+
+enum {
+   SVGA_REG_ID = 0,
+   SVGA_REG_ENABLE = 1,
+   SVGA_REG_WIDTH = 2,
+   SVGA_REG_HEIGHT = 3,
+   SVGA_REG_MAX_WIDTH = 4,
+   SVGA_REG_MAX_HEIGHT = 5,
+   SVGA_REG_DEPTH = 6,
+   SVGA_REG_BITS_PER_PIXEL = 7,       /* Current bpp in the guest */
+   SVGA_REG_PSEUDOCOLOR = 8,
+   SVGA_REG_RED_MASK = 9,
+   SVGA_REG_GREEN_MASK = 10,
+   SVGA_REG_BLUE_MASK = 11,
+   SVGA_REG_BYTES_PER_LINE = 12,
+   SVGA_REG_FB_START = 13,            /* (Deprecated) */
+   SVGA_REG_FB_OFFSET = 14,
+   SVGA_REG_VRAM_SIZE = 15,
+   SVGA_REG_FB_SIZE = 16,
+
+   /* ID 0 implementation only had the above registers, then the palette */
+
+   SVGA_REG_CAPABILITIES = 17,
+   SVGA_REG_MEM_START = 18,           /* (Deprecated) */
+   SVGA_REG_MEM_SIZE = 19,
+   SVGA_REG_CONFIG_DONE = 20,         /* Set when memory area configured */
+   SVGA_REG_SYNC = 21,                /* See "FIFO Synchronization Registers" */
+   SVGA_REG_BUSY = 22,                /* See "FIFO Synchronization Registers" */
+   SVGA_REG_GUEST_ID = 23,            /* Set guest OS identifier */
+   SVGA_REG_CURSOR_ID = 24,           /* (Deprecated) */
+   SVGA_REG_CURSOR_X = 25,            /* (Deprecated) */
+   SVGA_REG_CURSOR_Y = 26,            /* (Deprecated) */
+   SVGA_REG_CURSOR_ON = 27,           /* (Deprecated) */
+   SVGA_REG_HOST_BITS_PER_PIXEL = 28, /* (Deprecated) */
+   SVGA_REG_SCRATCH_SIZE = 29,        /* Number of scratch registers */
+   SVGA_REG_MEM_REGS = 30,            /* Number of FIFO registers */
+   SVGA_REG_NUM_DISPLAYS = 31,        /* (Deprecated) */
+   SVGA_REG_PITCHLOCK = 32,           /* Fixed pitch for all modes */
+   SVGA_REG_IRQMASK = 33,             /* Interrupt mask */
+
+   /* Legacy multi-monitor support */
+   SVGA_REG_NUM_GUEST_DISPLAYS = 34,/* Number of guest displays in X/Y direction */
+   SVGA_REG_DISPLAY_ID = 35,        /* Display ID for the following display attributes */
+   SVGA_REG_DISPLAY_IS_PRIMARY = 36,/* Whether this is a primary display */
+   SVGA_REG_DISPLAY_POSITION_X = 37,/* The display position x */
+   SVGA_REG_DISPLAY_POSITION_Y = 38,/* The display position y */
+   SVGA_REG_DISPLAY_WIDTH = 39,     /* The display's width */
+   SVGA_REG_DISPLAY_HEIGHT = 40,    /* The display's height */
+
+   /* See "Guest memory regions" below. */
+   SVGA_REG_GMR_ID = 41,
+   SVGA_REG_GMR_DESCRIPTOR = 42,
+   SVGA_REG_GMR_MAX_IDS = 43,
+   SVGA_REG_GMR_MAX_DESCRIPTOR_LENGTH = 44,
+
+   SVGA_REG_TRACES = 45,            /* Enable trace-based updates even when FIFO is on */
+   SVGA_REG_GMRS_MAX_PAGES = 46,    /* Maximum number of 4KB pages for all GMRs */
+   SVGA_REG_MEMORY_SIZE = 47,       /* Total dedicated device memory excluding FIFO */
+   SVGA_REG_TOP = 48,               /* Must be 1 more than the last register */
+
+   SVGA_PALETTE_BASE = 1024,        /* Base of SVGA color map */
+   /* Next 768 (== 256*3) registers exist for colormap */
+
+   SVGA_SCRATCH_BASE = SVGA_PALETTE_BASE + SVGA_NUM_PALETTE_REGS
+                                    /* Base of scratch registers */
+   /* Next reg[SVGA_REG_SCRATCH_SIZE] registers exist for scratch usage:
+      First 4 are reserved for VESA BIOS Extension; any remaining are for
+      the use of the current SVGA driver. */
+};
+
+
+/*
+ * Guest memory regions (GMRs):
+ *
+ * This is a new memory mapping feature available in SVGA devices
+ * which have the SVGA_CAP_GMR bit set. Previously, there were two
+ * fixed memory regions available with which to share data between the
+ * device and the driver: the FIFO ('MEM') and the framebuffer. GMRs
+ * are our name for an extensible way of providing arbitrary DMA
+ * buffers for use between the driver and the SVGA device. They are a
+ * new alternative to framebuffer memory, usable for both 2D and 3D
+ * graphics operations.
+ *
+ * Since GMR mapping must be done synchronously with guest CPU
+ * execution, we use a new pair of SVGA registers:
+ *
+ *   SVGA_REG_GMR_ID --
+ *
+ *     Read/write.
+ *     This register holds the 32-bit ID (a small positive integer)
+ *     of a GMR to create, delete, or redefine. Writing this register
+ *     has no side-effects.
+ *
+ *   SVGA_REG_GMR_DESCRIPTOR --
+ *
+ *     Write-only.
+ *     Writing this register will create, delete, or redefine the GMR
+ *     specified by the above ID register. If this register is zero,
+ *     the GMR is deleted. Any pointers into this GMR (including those
+ *     currently being processed by FIFO commands) will be
+ *     synchronously invalidated.
+ *
+ *     If this register is nonzero, it must be the physical page
+ *     number (PPN) of a data structure which describes the physical
+ *     layout of the memory region this GMR should describe. The
+ *     descriptor structure will be read synchronously by the SVGA
+ *     device when this register is written. The descriptor need not
+ *     remain allocated for the lifetime of the GMR.
+ *
+ *     The guest driver should write SVGA_REG_GMR_ID first, then
+ *     SVGA_REG_GMR_DESCRIPTOR.
+ *
+ *   SVGA_REG_GMR_MAX_IDS --
+ *
+ *     Read-only.
+ *     The SVGA device may choose to support a maximum number of
+ *     user-defined GMR IDs. This register holds the number of supported
+ *     IDs. (The maximum supported ID plus 1)
+ *
+ *   SVGA_REG_GMR_MAX_DESCRIPTOR_LENGTH --
+ *
+ *     Read-only.
+ *     The SVGA device may choose to put a limit on the total number
+ *     of SVGAGuestMemDescriptor structures it will read when defining
+ *     a single GMR.
+ *
+ * The descriptor structure is an array of SVGAGuestMemDescriptor
+ * structures. Each structure may do one of three things:
+ *
+ *   - Terminate the GMR descriptor list.
+ *     (ppn==0, numPages==0)
+ *
+ *   - Add a PPN or range of PPNs to the GMR's virtual address space.
+ *     (ppn != 0, numPages != 0)
+ *
+ *   - Provide the PPN of the next SVGAGuestMemDescriptor, in order to
+ *     support multi-page GMR descriptor tables without forcing the
+ *     driver to allocate physically contiguous memory.
+ *     (ppn != 0, numPages == 0)
+ *
+ * Note that each physical page of SVGAGuestMemDescriptor structures
+ * can describe at least 2MB of guest memory. If the driver needs to
+ * use more than one page of descriptor structures, it must use one of
+ * its SVGAGuestMemDescriptors to point to an additional page.  The
+ * device will never automatically cross a page boundary.
+ *
+ * Once the driver has described a GMR, it is immediately available
+ * for use via any FIFO command that uses an SVGAGuestPtr structure.
+ * These pointers include a GMR identifier plus an offset into that
+ * GMR.
+ *
+ * The driver must check the SVGA_CAP_GMR bit before using the GMR
+ * registers.
+ */
+
+/*
+ * Special GMR IDs, allowing SVGAGuestPtrs to point to framebuffer
+ * memory as well.  In the future, these IDs could even be used to
+ * allow legacy memory regions to be redefined by the guest as GMRs.
+ *
+ * Using the guest framebuffer (GFB) at BAR1 for general purpose DMA
+ * is being phased out. Please try to use user-defined GMRs whenever
+ * possible.
+ */
+#define SVGA_GMR_NULL         ((uint32) -1)
+#define SVGA_GMR_FRAMEBUFFER  ((uint32) -2)  /* Guest Framebuffer (GFB) */
+
+typedef
+struct SVGAGuestMemDescriptor {
+   uint32 ppn;
+   uint32 numPages;
+} SVGAGuestMemDescriptor;
+
+typedef
+struct SVGAGuestPtr {
+   uint32 gmrId;
+   uint32 offset;
+} SVGAGuestPtr;
+
+
+/*
+ * SVGAGMRImageFormat --
+ *
+ *    This is a packed representation of the source 2D image format
+ *    for a GMR-to-screen blit. Currently it is defined as an encoding
+ *    of the screen's color depth and bits-per-pixel, however, 16 bits
+ *    are reserved for future use to identify other encodings (such as
+ *    RGBA or higher-precision images).
+ *
+ *    Currently supported formats:
+ *
+ *       bpp depth  Format Name
+ *       --- -----  -----------
+ *        32    24  32-bit BGRX
+ *        24    24  24-bit BGR
+ *        16    16  RGB 5-6-5
+ *        16    15  RGB 5-5-5
+ *
+ */
+
+typedef
+struct SVGAGMRImageFormat {
+   union {
+      struct {
+         uint32 bitsPerPixel : 8;
+         uint32 colorDepth   : 8;
+         uint32 reserved     : 16;  /* Must be zero */
+      };
+
+      uint32 value;
+   };
+} SVGAGMRImageFormat;
+
+typedef
+struct SVGAGuestImage {
+   SVGAGuestPtr         ptr;
+
+   /*
+    * A note on interpretation of pitch: This value of pitch is the
+    * number of bytes between vertically adjacent image
+    * blocks. Normally this is the number of bytes between the first
+    * pixel of two adjacent scanlines. With compressed textures,
+    * however, this may represent the number of bytes between
+    * compression blocks rather than between rows of pixels.
+    *
+    * XXX: Compressed textures currently must be tightly packed in guest memory.
+    *
+    * If the image is 1-dimensional, pitch is ignored.
+    *
+    * If 'pitch' is zero, the SVGA3D device calculates a pitch value
+    * assuming each row of blocks is tightly packed.
+    */
+   uint32 pitch;
+} SVGAGuestImage;
+
+/*
+ * SVGAColorBGRX --
+ *
+ *    A 24-bit color format (BGRX), which does not depend on the
+ *    format of the legacy guest framebuffer (GFB) or the current
+ *    GMRFB state.
+ */
+
+typedef
+struct SVGAColorBGRX {
+   union {
+      struct {
+         uint32 b : 8;
+         uint32 g : 8;
+         uint32 r : 8;
+         uint32 x : 8;  /* Unused */
+      };
+
+      uint32 value;
+   };
+} SVGAColorBGRX;
+
+
+/*
+ * SVGASignedRect --
+ * SVGASignedPoint --
+ *
+ *    Signed rectangle and point primitives. These are used by the new
+ *    2D primitives for drawing to Screen Objects, which can occupy a
+ *    signed virtual coordinate space.
+ *
+ *    SVGASignedRect specifies a half-open interval: the (left, top)
+ *    pixel is part of the rectangle, but the (right, bottom) pixel is
+ *    not.
+ */
+
+typedef
+struct SVGASignedRect {
+   int32  left;
+   int32  top;
+   int32  right;
+   int32  bottom;
+} SVGASignedRect;
+
+typedef
+struct SVGASignedPoint {
+   int32  x;
+   int32  y;
+} SVGASignedPoint;
+
+
+/*
+ *  Capabilities
+ *
+ *  Note the holes in the bitfield. Missing bits have been deprecated,
+ *  and must not be reused. Those capabilities will never be reported
+ *  by new versions of the SVGA device.
+ *
+ * SVGA_CAP_GMR2 --
+ *    Provides asynchronous commands to define and remap guest memory
+ *    regions.  Adds device registers SVGA_REG_GMRS_MAX_PAGES and
+ *    SVGA_REG_MEMORY_SIZE.
+ *
+ * SVGA_CAP_SCREEN_OBJECT_2 --
+ *    Allow screen object support, and require backing stores from the
+ *    guest for each screen object.
+ */
+
+#define SVGA_CAP_NONE               0x00000000
+#define SVGA_CAP_RECT_COPY          0x00000002
+#define SVGA_CAP_CURSOR             0x00000020
+#define SVGA_CAP_CURSOR_BYPASS      0x00000040   /* Legacy (Use Cursor Bypass 3 instead) */
+#define SVGA_CAP_CURSOR_BYPASS_2    0x00000080   /* Legacy (Use Cursor Bypass 3 instead) */
+#define SVGA_CAP_8BIT_EMULATION     0x00000100
+#define SVGA_CAP_ALPHA_CURSOR       0x00000200
+#define SVGA_CAP_3D                 0x00004000
+#define SVGA_CAP_EXTENDED_FIFO      0x00008000
+#define SVGA_CAP_MULTIMON           0x00010000   /* Legacy multi-monitor support */
+#define SVGA_CAP_PITCHLOCK          0x00020000
+#define SVGA_CAP_IRQMASK            0x00040000
+#define SVGA_CAP_DISPLAY_TOPOLOGY   0x00080000   /* Legacy multi-monitor support */
+#define SVGA_CAP_GMR                0x00100000
+#define SVGA_CAP_TRACES             0x00200000
+#define SVGA_CAP_GMR2               0x00400000
+#define SVGA_CAP_SCREEN_OBJECT_2    0x00800000
+
+
+/*
+ * FIFO register indices.
+ *
+ * The FIFO is a chunk of device memory mapped into guest physmem.  It
+ * is always treated as 32-bit words.
+ *
+ * The guest driver gets to decide how to partition it between
+ * - FIFO registers (there are always at least 4, specifying where the
+ *   following data area is and how much data it contains; there may be
+ *   more registers following these, depending on the FIFO protocol
+ *   version in use)
+ * - FIFO data, written by the guest and slurped out by the VMX.
+ * These indices are 32-bit word offsets into the FIFO.
+ */
+
+enum {
+   /*
+    * Block 1 (basic registers): The originally defined FIFO registers.
+    * These exist and are valid for all versions of the FIFO protocol.
+    */
+
+   SVGA_FIFO_MIN = 0,
+   SVGA_FIFO_MAX,       /* The distance from MIN to MAX must be at least 10K */
+   SVGA_FIFO_NEXT_CMD,
+   SVGA_FIFO_STOP,
+
+   /*
+    * Block 2 (extended registers): Mandatory registers for the extended
+    * FIFO.  These exist if the SVGA caps register includes
+    * SVGA_CAP_EXTENDED_FIFO; some of them are valid only if their
+    * associated capability bit is enabled.
+    *
+    * Note that when originally defined, SVGA_CAP_EXTENDED_FIFO implied
+    * support only for (FIFO registers) CAPABILITIES, FLAGS, and FENCE.
+    * This means that the guest has to test individually (in most cases
+    * using FIFO caps) for the presence of registers after this; the VMX
+    * can define "extended FIFO" to mean whatever it wants, and currently
+    * won't enable it unless there's room for that set and much more.
+    */
+
+   SVGA_FIFO_CAPABILITIES = 4,
+   SVGA_FIFO_FLAGS,
+   /* Valid with SVGA_FIFO_CAP_FENCE: */
+   SVGA_FIFO_FENCE,
+
+   /*
+    * Block 3a (optional extended registers): Additional registers for the
+    * extended FIFO, whose presence isn't actually implied by
+    * SVGA_CAP_EXTENDED_FIFO; these exist if SVGA_FIFO_MIN is high enough to
+    * leave room for them.
+    *
+    * These in block 3a, the VMX currently considers mandatory for the
+    * extended FIFO.
+    */
+
+   /* Valid if exists (i.e. if extended FIFO enabled): */
+   SVGA_FIFO_3D_HWVERSION,       /* See SVGA3dHardwareVersion in svga3d_reg.h */
+   /* Valid with SVGA_FIFO_CAP_PITCHLOCK: */
+   SVGA_FIFO_PITCHLOCK,
+
+   /* Valid with SVGA_FIFO_CAP_CURSOR_BYPASS_3: */
+   SVGA_FIFO_CURSOR_ON,          /* Cursor bypass 3 show/hide register */
+   SVGA_FIFO_CURSOR_X,           /* Cursor bypass 3 x register */
+   SVGA_FIFO_CURSOR_Y,           /* Cursor bypass 3 y register */
+   SVGA_FIFO_CURSOR_COUNT,       /* Incremented when any of the other 3 change */
+   SVGA_FIFO_CURSOR_LAST_UPDATED,/* Last time the host updated the cursor */
+
+   /* Valid with SVGA_FIFO_CAP_RESERVE: */
+   SVGA_FIFO_RESERVED,           /* Bytes past NEXT_CMD with real contents */
+
+   /*
+    * Valid with SVGA_FIFO_CAP_SCREEN_OBJECT or SVGA_FIFO_CAP_SCREEN_OBJECT_2:
+    *
+    * By default this is SVGA_ID_INVALID, to indicate that the cursor
+    * coordinates are specified relative to the virtual root. If this
+    * is set to a specific screen ID, cursor position is reinterpreted
+    * as a signed offset relative to that screen's origin.
+    */
+   SVGA_FIFO_CURSOR_SCREEN_ID,
+
+   /*
+    * Valid with SVGA_FIFO_CAP_DEAD
+    *
+    * An arbitrary value written by the host, drivers should not use it.
+    */
+   SVGA_FIFO_DEAD,
+
+   /*
+    * Valid with SVGA_FIFO_CAP_3D_HWVERSION_REVISED:
+    *
+    * Contains 3D HWVERSION (see SVGA3dHardwareVersion in svga3d_reg.h)
+    * on platforms that can enforce graphics resource limits.
+    */
+   SVGA_FIFO_3D_HWVERSION_REVISED,
+
+   /*
+    * XXX: The gap here, up until SVGA_FIFO_3D_CAPS, can be used for new
+    * registers, but this must be done carefully and with judicious use of
+    * capability bits, since comparisons based on SVGA_FIFO_MIN aren't
+    * enough to tell you whether the register exists: we've shipped drivers
+    * and products that used SVGA_FIFO_3D_CAPS but didn't know about some of
+    * the earlier ones.  The actual order of introduction was:
+    * - PITCHLOCK
+    * - 3D_CAPS
+    * - CURSOR_* (cursor bypass 3)
+    * - RESERVED
+    * So, code that wants to know whether it can use any of the
+    * aforementioned registers, or anything else added after PITCHLOCK and
+    * before 3D_CAPS, needs to reason about something other than
+    * SVGA_FIFO_MIN.
+    */
+
+   /*
+    * 3D caps block space; valid with 3D hardware version >=
+    * SVGA3D_HWVERSION_WS6_B1.
+    */
+   SVGA_FIFO_3D_CAPS      = 32,
+   SVGA_FIFO_3D_CAPS_LAST = 32 + 255,
+
+   /*
+    * End of VMX's current definition of "extended-FIFO registers".
+    * Registers before here are always enabled/disabled as a block; either
+    * the extended FIFO is enabled and includes all preceding registers, or
+    * it's disabled entirely.
+    *
+    * Block 3b (truly optional extended registers): Additional registers for
+    * the extended FIFO, which the VMX already knows how to enable and
+    * disable with correct granularity.
+    *
+    * Registers after here exist if and only if the guest SVGA driver
+    * sets SVGA_FIFO_MIN high enough to leave room for them.
+    */
+
+   /* Valid if register exists: */
+   SVGA_FIFO_GUEST_3D_HWVERSION, /* Guest driver's 3D version */
+   SVGA_FIFO_FENCE_GOAL,         /* Matching target for SVGA_IRQFLAG_FENCE_GOAL */
+   SVGA_FIFO_BUSY,               /* See "FIFO Synchronization Registers" */
+
+   /*
+    * Always keep this last.  This defines the maximum number of
+    * registers we know about.  At power-on, this value is placed in
+    * the SVGA_REG_MEM_REGS register, and we expect the guest driver
+    * to allocate this much space in FIFO memory for registers.
+    */
+    SVGA_FIFO_NUM_REGS
+};
+
+
+/*
+ * Definition of registers included in extended FIFO support.
+ *
+ * The guest SVGA driver gets to allocate the FIFO between registers
+ * and data.  It must always allocate at least 4 registers, but old
+ * drivers stopped there.
+ *
+ * The VMX will enable extended FIFO support if and only if the guest
+ * left enough room for all registers defined as part of the mandatory
+ * set for the extended FIFO.
+ *
+ * Note that the guest drivers typically allocate the FIFO only at
+ * initialization time, not at mode switches, so it's likely that the
+ * number of FIFO registers won't change without a reboot.
+ *
+ * All registers less than this value are guaranteed to be present if
+ * svgaUser->fifo.extended is set. Any later registers must be tested
+ * individually for compatibility at each use (in the VMX).
+ *
+ * This value is used only by the VMX, so it can change without
+ * affecting driver compatibility; keep it that way?
+ */
+#define SVGA_FIFO_EXTENDED_MANDATORY_REGS  (SVGA_FIFO_3D_CAPS_LAST + 1)
+
+
+/*
+ * FIFO Synchronization Registers
+ *
+ *  This explains the relationship between the various FIFO
+ *  sync-related registers in IOSpace and in FIFO space.
+ *
+ *  SVGA_REG_SYNC --
+ *
+ *       The SYNC register can be used in two different ways by the guest:
+ *
+ *         1. If the guest wishes to fully sync (drain) the FIFO,
+ *            it will write once to SYNC then poll on the BUSY
+ *            register. The FIFO is sync'ed once BUSY is zero.
+ *
+ *         2. If the guest wants to asynchronously wake up the host,
+ *            it will write once to SYNC without polling on BUSY.
+ *            Ideally it will do this after some new commands have
+ *            been placed in the FIFO, and after reading a zero
+ *            from SVGA_FIFO_BUSY.
+ *
+ *       (1) is the original behaviour that SYNC was designed to
+ *       support.  Originally, a write to SYNC would implicitly
+ *       trigger a read from BUSY. This causes us to synchronously
+ *       process the FIFO.
+ *
+ *       This behaviour has since been changed so that writing SYNC
+ *       will *not* implicitly cause a read from BUSY. Instead, it
+ *       makes a channel call which asynchronously wakes up the MKS
+ *       thread.
+ *
+ *       New guests can use this new behaviour to implement (2)
+ *       efficiently. This lets guests get the host's attention
+ *       without waiting for the MKS to poll, which gives us much
+ *       better CPU utilization on SMP hosts and on UP hosts while
+ *       we're blocked on the host GPU.
+ *
+ *       Old guests shouldn't notice the behaviour change. SYNC was
+ *       never guaranteed to process the entire FIFO, since it was
+ *       bounded to a particular number of CPU cycles. Old guests will
+ *       still loop on the BUSY register until the FIFO is empty.
+ *
+ *       Writing to SYNC currently has the following side-effects:
+ *
+ *         - Sets SVGA_REG_BUSY to TRUE (in the monitor)
+ *         - Asynchronously wakes up the MKS thread for FIFO processing
+ *         - The value written to SYNC is recorded as a "reason", for
+ *           stats purposes.
+ *
+ *       If SVGA_FIFO_BUSY is available, drivers are advised to only
+ *       write to SYNC if SVGA_FIFO_BUSY is FALSE. Drivers should set
+ *       SVGA_FIFO_BUSY to TRUE after writing to SYNC. The MKS will
+ *       eventually set SVGA_FIFO_BUSY on its own, but this approach
+ *       lets the driver avoid sending multiple asynchronous wakeup
+ *       messages to the MKS thread.
+ *
+ *  SVGA_REG_BUSY --
+ *
+ *       This register is set to TRUE when SVGA_REG_SYNC is written,
+ *       and it reads as FALSE when the FIFO has been completely
+ *       drained.
+ *
+ *       Every read from this register causes us to synchronously
+ *       process FIFO commands. There is no guarantee as to how many
+ *       commands each read will process.
+ *
+ *       CPU time spent processing FIFO commands will be billed to
+ *       the guest.
+ *
+ *       New drivers should avoid using this register unless they
+ *       need to guarantee that the FIFO is completely drained. It
+ *       is overkill for performing a sync-to-fence. Older drivers
+ *       will use this register for any type of synchronization.
+ *
+ *  SVGA_FIFO_BUSY --
+ *
+ *       This register is a fast way for the guest driver to check
+ *       whether the FIFO is already being processed. It reads and
+ *       writes at normal RAM speeds, with no monitor intervention.
+ *
+ *       If this register reads as TRUE, the host is guaranteeing that
+ *       any new commands written into the FIFO will be noticed before
+ *       the MKS goes back to sleep.
+ *
+ *       If this register reads as FALSE, no such guarantee can be
+ *       made.
+ *
+ *       The guest should use this register to quickly determine
+ *       whether or not it needs to wake up the host. If the guest
+ *       just wrote a command or group of commands that it would like
+ *       the host to begin processing, it should:
+ *
+ *         1. Read SVGA_FIFO_BUSY. If it reads as TRUE, no further
+ *            action is necessary.
+ *
+ *         2. Write TRUE to SVGA_FIFO_BUSY. This informs future guest
+ *            code that we've already sent a SYNC to the host and we
+ *            don't need to send a duplicate.
+ *
+ *         3. Write a reason to SVGA_REG_SYNC. This will send an
+ *            asynchronous wakeup to the MKS thread.
+ */
+
+
+/*
+ * FIFO Capabilities
+ *
+ *      Fence -- Fence register and command are supported
+ *      Accel Front -- Front buffer only commands are supported
+ *      Pitch Lock -- Pitch lock register is supported
+ *      Video -- SVGA Video overlay units are supported
+ *      Escape -- Escape command is supported
+ *
+ * XXX: Add longer descriptions for each capability, including a list
+ *      of the new features that each capability provides.
+ *
+ * SVGA_FIFO_CAP_SCREEN_OBJECT --
+ *
+ *    Provides dynamic multi-screen rendering, for improved Unity and
+ *    multi-monitor modes. With Screen Object, the guest can
+ *    dynamically create and destroy 'screens', which can represent
+ *    Unity windows or virtual monitors. Screen Object also provides
+ *    strong guarantees that DMA operations happen only when
+ *    guest-initiated. Screen Object deprecates the BAR1 guest
+ *    framebuffer (GFB) and all commands that work only with the GFB.
+ *
+ *    New registers:
+ *       FIFO_CURSOR_SCREEN_ID, VIDEO_DATA_GMRID, VIDEO_DST_SCREEN_ID
+ *
+ *    New 2D commands:
+ *       DEFINE_SCREEN, DESTROY_SCREEN, DEFINE_GMRFB, BLIT_GMRFB_TO_SCREEN,
+ *       BLIT_SCREEN_TO_GMRFB, ANNOTATION_FILL, ANNOTATION_COPY
+ *
+ *    New 3D commands:
+ *       BLIT_SURFACE_TO_SCREEN
+ *
+ *    New guarantees:
+ *
+ *       - The host will not read or write guest memory, including the GFB,
+ *         except when explicitly initiated by a DMA command.
+ *
+ *       - All DMA, including legacy DMA like UPDATE and PRESENT_READBACK,
+ *         is guaranteed to complete before any subsequent FENCEs.
+ *
+ *       - All legacy commands which affect a Screen (UPDATE, PRESENT,
+ *         PRESENT_READBACK) as well as new Screen blit commands will
+ *         all behave consistently as blits, and memory will be read
+ *         or written in FIFO order.
+ *
+ *         For example, if you PRESENT from one SVGA3D surface to multiple
+ *         places on the screen, the data copied will always be from the
+ *         SVGA3D surface at the time the PRESENT was issued in the FIFO.
+ *         This was not necessarily true on devices without Screen Object.
+ *
+ *         This means that on devices that support Screen Object, the
+ *         PRESENT_READBACK command should not be necessary unless you
+ *         actually want to read back the results of 3D rendering into
+ *         system memory. (And for that, the BLIT_SCREEN_TO_GMRFB
+ *         command provides a strict superset of functionality.)
+ *
+ *       - When a screen is resized, either using Screen Object commands or
+ *         legacy multimon registers, its contents are preserved.
+ *
+ * SVGA_FIFO_CAP_GMR2 --
+ *
+ *    Provides new commands to define and remap guest memory regions (GMR).
+ *
+ *    New 2D commands:
+ *       DEFINE_GMR2, REMAP_GMR2.
+ *
+ * SVGA_FIFO_CAP_3D_HWVERSION_REVISED --
+ *
+ *    Indicates new register SVGA_FIFO_3D_HWVERSION_REVISED exists.
+ *    This register may replace SVGA_FIFO_3D_HWVERSION on platforms
+ *    that enforce graphics resource limits.  This allows the platform
+ *    to clear SVGA_FIFO_3D_HWVERSION and disable 3D in legacy guest
+ *    drivers that do not limit their resources.
+ *
+ *    Note this is an alias to SVGA_FIFO_CAP_GMR2 because these indicators
+ *    are codependent (and thus we use a single capability bit).
+ *
+ * SVGA_FIFO_CAP_SCREEN_OBJECT_2 --
+ *
+ *    Modifies the DEFINE_SCREEN command to include a guest provided
+ *    backing store in GMR memory and the bytesPerLine for the backing
+ *    store.  This capability requires the use of a backing store when
+ *    creating screen objects.  However if SVGA_FIFO_CAP_SCREEN_OBJECT
+ *    is present then backing stores are optional.
+ *
+ * SVGA_FIFO_CAP_DEAD --
+ *
+ *    Drivers should not use this cap bit.  This cap bit can not be
+ *    reused since some hosts already expose it.
+ */
+
+#define SVGA_FIFO_CAP_NONE                  0
+#define SVGA_FIFO_CAP_FENCE             (1<<0)
+#define SVGA_FIFO_CAP_ACCELFRONT        (1<<1)
+#define SVGA_FIFO_CAP_PITCHLOCK         (1<<2)
+#define SVGA_FIFO_CAP_VIDEO             (1<<3)
+#define SVGA_FIFO_CAP_CURSOR_BYPASS_3   (1<<4)
+#define SVGA_FIFO_CAP_ESCAPE            (1<<5)
+#define SVGA_FIFO_CAP_RESERVE           (1<<6)
+#define SVGA_FIFO_CAP_SCREEN_OBJECT     (1<<7)
+#define SVGA_FIFO_CAP_GMR2              (1<<8)
+#define SVGA_FIFO_CAP_3D_HWVERSION_REVISED  SVGA_FIFO_CAP_GMR2
+#define SVGA_FIFO_CAP_SCREEN_OBJECT_2   (1<<9)
+#define SVGA_FIFO_CAP_DEAD              (1<<10)
+
+
+/*
+ * FIFO Flags
+ *
+ *      Accel Front -- Driver should use front buffer only commands
+ */
+
+#define SVGA_FIFO_FLAG_NONE                 0
+#define SVGA_FIFO_FLAG_ACCELFRONT       (1<<0)
+#define SVGA_FIFO_FLAG_RESERVED        (1<<31) /* Internal use only */
+
+/*
+ * FIFO reservation sentinel value
+ */
+
+#define SVGA_FIFO_RESERVED_UNKNOWN      0xffffffff
+
+
+/*
+ * Video overlay support
+ */
+
+#define SVGA_NUM_OVERLAY_UNITS 32
+
+
+/*
+ * Video capabilities that the guest is currently using
+ */
+
+#define SVGA_VIDEO_FLAG_COLORKEY        0x0001
+
+
+/*
+ * Offsets for the video overlay registers
+ */
+
+enum {
+   SVGA_VIDEO_ENABLED = 0,
+   SVGA_VIDEO_FLAGS,
+   SVGA_VIDEO_DATA_OFFSET,
+   SVGA_VIDEO_FORMAT,
+   SVGA_VIDEO_COLORKEY,
+   SVGA_VIDEO_SIZE,          /* Deprecated */
+   SVGA_VIDEO_WIDTH,
+   SVGA_VIDEO_HEIGHT,
+   SVGA_VIDEO_SRC_X,
+   SVGA_VIDEO_SRC_Y,
+   SVGA_VIDEO_SRC_WIDTH,
+   SVGA_VIDEO_SRC_HEIGHT,
+   SVGA_VIDEO_DST_X,         /* Signed int32 */
+   SVGA_VIDEO_DST_Y,         /* Signed int32 */
+   SVGA_VIDEO_DST_WIDTH,
+   SVGA_VIDEO_DST_HEIGHT,
+   SVGA_VIDEO_PITCH_1,
+   SVGA_VIDEO_PITCH_2,
+   SVGA_VIDEO_PITCH_3,
+   SVGA_VIDEO_DATA_GMRID,    /* Optional, defaults to SVGA_GMR_FRAMEBUFFER */
+   SVGA_VIDEO_DST_SCREEN_ID, /* Optional, defaults to virtual coords (SVGA_ID_INVALID) */
+   SVGA_VIDEO_NUM_REGS
+};
+
+
+/*
+ * SVGA Overlay Units
+ *
+ *      width and height relate to the entire source video frame.
+ *      srcX, srcY, srcWidth and srcHeight represent subset of the source
+ *      video frame to be displayed.
+ */
+
+typedef struct SVGAOverlayUnit {
+   uint32 enabled;
+   uint32 flags;
+   uint32 dataOffset;
+   uint32 format;
+   uint32 colorKey;
+   uint32 size;
+   uint32 width;
+   uint32 height;
+   uint32 srcX;
+   uint32 srcY;
+   uint32 srcWidth;
+   uint32 srcHeight;
+   int32  dstX;
+   int32  dstY;
+   uint32 dstWidth;
+   uint32 dstHeight;
+   uint32 pitches[3];
+   uint32 dataGMRId;
+   uint32 dstScreenId;
+} SVGAOverlayUnit;
+
+
+/*
+ * SVGAScreenObject --
+ *
+ *    This is a new way to represent a guest's multi-monitor screen or
+ *    Unity window. Screen objects are only supported if the
+ *    SVGA_FIFO_CAP_SCREEN_OBJECT capability bit is set.
+ *
+ *    If Screen Objects are supported, they can be used to fully
+ *    replace the functionality provided by the framebuffer registers
+ *    (SVGA_REG_WIDTH, HEIGHT, etc.) and by SVGA_CAP_DISPLAY_TOPOLOGY.
+ *
+ *    The screen object is a struct with guaranteed binary
+ *    compatibility. New flags can be added, and the struct may grow,
+ *    but existing fields must retain their meaning.
+ *
+ *    Added with SVGA_FIFO_CAP_SCREEN_OBJECT_2 are required fields of
+ *    a SVGAGuestPtr that is used to back the screen contents.  This
+ *    memory must come from the GFB.  The guest is not allowed to
+ *    access the memory and doing so will have undefined results.  The
+ *    backing store is required to be page aligned and the size is
+ *    padded to the next page boundry.  The number of pages is:
+ *       (bytesPerLine * size.width * 4 + PAGE_SIZE - 1) / PAGE_SIZE
+ *
+ *    The pitch in the backingStore is required to be at least large
+ *    enough to hold a 32bbp scanline.  It is recommended that the
+ *    driver pad bytesPerLine for a potential performance win.
+ *
+ *    The cloneCount field is treated as a hint from the guest that
+ *    the user wants this display to be cloned, countCount times.  A
+ *    value of zero means no cloning should happen.
+ */
+
+#define SVGA_SCREEN_MUST_BE_SET     (1 << 0) /* Must be set or results undefined */
+#define SVGA_SCREEN_HAS_ROOT SVGA_SCREEN_MUST_BE_SET /* Deprecated */
+#define SVGA_SCREEN_IS_PRIMARY      (1 << 1) /* Guest considers this screen to be 'primary' */
+#define SVGA_SCREEN_FULLSCREEN_HINT (1 << 2) /* Guest is running a fullscreen app here */
+
+/*
+ * Added with SVGA_FIFO_CAP_SCREEN_OBJECT_2.  When the screen is
+ * deactivated the base layer is defined to lose all contents and
+ * become black.  When a screen is deactivated the backing store is
+ * optional.  When set backingPtr and bytesPerLine will be ignored.
+ */
+#define SVGA_SCREEN_DEACTIVATE  (1 << 3)
+
+/*
+ * Added with SVGA_FIFO_CAP_SCREEN_OBJECT_2.  When this flag is set
+ * the screen contents will be outputted as all black to the user
+ * though the base layer contents is preserved.  The screen base layer
+ * can still be read and written to like normal though the no visible
+ * effect will be seen by the user.  When the flag is changed the
+ * screen will be blanked or redrawn to the current contents as needed
+ * without any extra commands from the driver.  This flag only has an
+ * effect when the screen is not deactivated.
+ */
+#define SVGA_SCREEN_BLANKING (1 << 4)
+
+typedef
+struct SVGAScreenObject {
+   uint32 structSize;   /* sizeof(SVGAScreenObject) */
+   uint32 id;
+   uint32 flags;
+   struct {
+      uint32 width;
+      uint32 height;
+   } size;
+   struct {
+      int32 x;
+      int32 y;
+   } root;
+
+   /*
+    * Added and required by SVGA_FIFO_CAP_SCREEN_OBJECT_2, optional
+    * with SVGA_FIFO_CAP_SCREEN_OBJECT.
+    */
+   SVGAGuestImage backingStore;
+   uint32 cloneCount;
+} SVGAScreenObject;
+
+
+/*
+ *  Commands in the command FIFO:
+ *
+ *  Command IDs defined below are used for the traditional 2D FIFO
+ *  communication (not all commands are available for all versions of the
+ *  SVGA FIFO protocol).
+ *
+ *  Note the holes in the command ID numbers: These commands have been
+ *  deprecated, and the old IDs must not be reused.
+ *
+ *  Command IDs from 1000 to 1999 are reserved for use by the SVGA3D
+ *  protocol.
+ *
+ *  Each command's parameters are described by the comments and
+ *  structs below.
+ */
+
+typedef enum {
+   SVGA_CMD_INVALID_CMD           = 0,
+   SVGA_CMD_UPDATE                = 1,
+   SVGA_CMD_RECT_COPY             = 3,
+   SVGA_CMD_DEFINE_CURSOR         = 19,
+   SVGA_CMD_DEFINE_ALPHA_CURSOR   = 22,
+   SVGA_CMD_UPDATE_VERBOSE        = 25,
+   SVGA_CMD_FRONT_ROP_FILL        = 29,
+   SVGA_CMD_FENCE                 = 30,
+   SVGA_CMD_ESCAPE                = 33,
+   SVGA_CMD_DEFINE_SCREEN         = 34,
+   SVGA_CMD_DESTROY_SCREEN        = 35,
+   SVGA_CMD_DEFINE_GMRFB          = 36,
+   SVGA_CMD_BLIT_GMRFB_TO_SCREEN  = 37,
+   SVGA_CMD_BLIT_SCREEN_TO_GMRFB  = 38,
+   SVGA_CMD_ANNOTATION_FILL       = 39,
+   SVGA_CMD_ANNOTATION_COPY       = 40,
+   SVGA_CMD_DEFINE_GMR2           = 41,
+   SVGA_CMD_REMAP_GMR2            = 42,
+   SVGA_CMD_MAX
+} SVGAFifoCmdId;
+
+#define SVGA_CMD_MAX_ARGS           64
+
+
+/*
+ * SVGA_CMD_UPDATE --
+ *
+ *    This is a DMA transfer which copies from the Guest Framebuffer
+ *    (GFB) at BAR1 + SVGA_REG_FB_OFFSET to any screens which
+ *    intersect with the provided virtual rectangle.
+ *
+ *    This command does not support using arbitrary guest memory as a
+ *    data source- it only works with the pre-defined GFB memory.
+ *    This command also does not support signed virtual coordinates.
+ *    If you have defined screens (using SVGA_CMD_DEFINE_SCREEN) with
+ *    negative root x/y coordinates, the negative portion of those
+ *    screens will not be reachable by this command.
+ *
+ *    This command is not necessary when using framebuffer
+ *    traces. Traces are automatically enabled if the SVGA FIFO is
+ *    disabled, and you may explicitly enable/disable traces using
+ *    SVGA_REG_TRACES. With traces enabled, any write to the GFB will
+ *    automatically act as if a subsequent SVGA_CMD_UPDATE was issued.
+ *
+ *    Traces and SVGA_CMD_UPDATE are the only supported ways to render
+ *    pseudocolor screen updates. The newer Screen Object commands
+ *    only support true color formats.
+ *
+ * Availability:
+ *    Always available.
+ */
+
+typedef
+struct SVGAFifoCmdUpdate {
+   uint32 x;
+   uint32 y;
+   uint32 width;
+   uint32 height;
+} SVGAFifoCmdUpdate;
+
+
+/*
+ * SVGA_CMD_RECT_COPY --
+ *
+ *    Perform a rectangular DMA transfer from one area of the GFB to
+ *    another, and copy the result to any screens which intersect it.
+ *
+ * Availability:
+ *    SVGA_CAP_RECT_COPY
+ */
+
+typedef
+struct SVGAFifoCmdRectCopy {
+   uint32 srcX;
+   uint32 srcY;
+   uint32 destX;
+   uint32 destY;
+   uint32 width;
+   uint32 height;
+} SVGAFifoCmdRectCopy;
+
+
+/*
+ * SVGA_CMD_DEFINE_CURSOR --
+ *
+ *    Provide a new cursor image, as an AND/XOR mask.
+ *
+ *    The recommended way to position the cursor overlay is by using
+ *    the SVGA_FIFO_CURSOR_* registers, supported by the
+ *    SVGA_FIFO_CAP_CURSOR_BYPASS_3 capability.
+ *
+ * Availability:
+ *    SVGA_CAP_CURSOR
+ */
+
+typedef
+struct SVGAFifoCmdDefineCursor {
+   uint32 id;             /* Reserved, must be zero. */
+   uint32 hotspotX;
+   uint32 hotspotY;
+   uint32 width;
+   uint32 height;
+   uint32 andMaskDepth;   /* Value must be 1 or equal to BITS_PER_PIXEL */
+   uint32 xorMaskDepth;   /* Value must be 1 or equal to BITS_PER_PIXEL */
+   /*
+    * Followed by scanline data for AND mask, then XOR mask.
+    * Each scanline is padded to a 32-bit boundary.
+   */
+} SVGAFifoCmdDefineCursor;
+
+
+/*
+ * SVGA_CMD_DEFINE_ALPHA_CURSOR --
+ *
+ *    Provide a new cursor image, in 32-bit BGRA format.
+ *
+ *    The recommended way to position the cursor overlay is by using
+ *    the SVGA_FIFO_CURSOR_* registers, supported by the
+ *    SVGA_FIFO_CAP_CURSOR_BYPASS_3 capability.
+ *
+ * Availability:
+ *    SVGA_CAP_ALPHA_CURSOR
+ */
+
+typedef
+struct SVGAFifoCmdDefineAlphaCursor {
+   uint32 id;             /* Reserved, must be zero. */
+   uint32 hotspotX;
+   uint32 hotspotY;
+   uint32 width;
+   uint32 height;
+   /* Followed by scanline data */
+} SVGAFifoCmdDefineAlphaCursor;
+
+
+/*
+ * SVGA_CMD_UPDATE_VERBOSE --
+ *
+ *    Just like SVGA_CMD_UPDATE, but also provide a per-rectangle
+ *    'reason' value, an opaque cookie which is used by internal
+ *    debugging tools. Third party drivers should not use this
+ *    command.
+ *
+ * Availability:
+ *    SVGA_CAP_EXTENDED_FIFO
+ */
+
+typedef
+struct SVGAFifoCmdUpdateVerbose {
+   uint32 x;
+   uint32 y;
+   uint32 width;
+   uint32 height;
+   uint32 reason;
+} SVGAFifoCmdUpdateVerbose;
+
+
+/*
+ * SVGA_CMD_FRONT_ROP_FILL --
+ *
+ *    This is a hint which tells the SVGA device that the driver has
+ *    just filled a rectangular region of the GFB with a solid
+ *    color. Instead of reading these pixels from the GFB, the device
+ *    can assume that they all equal 'color'. This is primarily used
+ *    for remote desktop protocols.
+ *
+ * Availability:
+ *    SVGA_FIFO_CAP_ACCELFRONT
+ */
+
+#define  SVGA_ROP_COPY                    0x03
+
+typedef
+struct SVGAFifoCmdFrontRopFill {
+   uint32 color;     /* In the same format as the GFB */
+   uint32 x;
+   uint32 y;
+   uint32 width;
+   uint32 height;
+   uint32 rop;       /* Must be SVGA_ROP_COPY */
+} SVGAFifoCmdFrontRopFill;
+
+
+/*
+ * SVGA_CMD_FENCE --
+ *
+ *    Insert a synchronization fence.  When the SVGA device reaches
+ *    this command, it will copy the 'fence' value into the
+ *    SVGA_FIFO_FENCE register. It will also compare the fence against
+ *    SVGA_FIFO_FENCE_GOAL. If the fence matches the goal and the
+ *    SVGA_IRQFLAG_FENCE_GOAL interrupt is enabled, the device will
+ *    raise this interrupt.
+ *
+ * Availability:
+ *    SVGA_FIFO_FENCE for this command,
+ *    SVGA_CAP_IRQMASK for SVGA_FIFO_FENCE_GOAL.
+ */
+
+typedef
+struct {
+   uint32 fence;
+} SVGAFifoCmdFence;
+
+
+/*
+ * SVGA_CMD_ESCAPE --
+ *
+ *    Send an extended or vendor-specific variable length command.
+ *    This is used for video overlay, third party plugins, and
+ *    internal debugging tools. See svga_escape.h
+ *
+ * Availability:
+ *    SVGA_FIFO_CAP_ESCAPE
+ */
+
+typedef
+struct SVGAFifoCmdEscape {
+   uint32 nsid;
+   uint32 size;
+   /* followed by 'size' bytes of data */
+} SVGAFifoCmdEscape;
+
+
+/*
+ * SVGA_CMD_DEFINE_SCREEN --
+ *
+ *    Define or redefine an SVGAScreenObject. See the description of
+ *    SVGAScreenObject above.  The video driver is responsible for
+ *    generating new screen IDs. They should be small positive
+ *    integers. The virtual device will have an implementation
+ *    specific upper limit on the number of screen IDs
+ *    supported. Drivers are responsible for recycling IDs. The first
+ *    valid ID is zero.
+ *
+ *    - Interaction with other registers:
+ *
+ *    For backwards compatibility, when the GFB mode registers (WIDTH,
+ *    HEIGHT, PITCHLOCK, BITS_PER_PIXEL) are modified, the SVGA device
+ *    deletes all screens other than screen #0, and redefines screen
+ *    #0 according to the specified mode. Drivers that use
+ *    SVGA_CMD_DEFINE_SCREEN should destroy or redefine screen #0.
+ *
+ *    If you use screen objects, do not use the legacy multi-mon
+ *    registers (SVGA_REG_NUM_GUEST_DISPLAYS, SVGA_REG_DISPLAY_*).
+ *
+ * Availability:
+ *    SVGA_FIFO_CAP_SCREEN_OBJECT or SVGA_FIFO_CAP_SCREEN_OBJECT_2
+ */
+
+typedef
+struct {
+   SVGAScreenObject screen;   /* Variable-length according to version */
+} SVGAFifoCmdDefineScreen;
+
+
+/*
+ * SVGA_CMD_DESTROY_SCREEN --
+ *
+ *    Destroy an SVGAScreenObject. Its ID is immediately available for
+ *    re-use.
+ *
+ * Availability:
+ *    SVGA_FIFO_CAP_SCREEN_OBJECT or SVGA_FIFO_CAP_SCREEN_OBJECT_2
+ */
+
+typedef
+struct {
+   uint32 screenId;
+} SVGAFifoCmdDestroyScreen;
+
+
+/*
+ * SVGA_CMD_DEFINE_GMRFB --
+ *
+ *    This command sets a piece of SVGA device state called the
+ *    Guest Memory Region Framebuffer, or GMRFB. The GMRFB is a
+ *    piece of light-weight state which identifies the location and
+ *    format of an image in guest memory or in BAR1. The GMRFB has
+ *    an arbitrary size, and it doesn't need to match the geometry
+ *    of the GFB or any screen object.
+ *
+ *    The GMRFB can be redefined as often as you like. You could
+ *    always use the same GMRFB, you could redefine it before
+ *    rendering from a different guest screen, or you could even
+ *    redefine it before every blit.
+ *
+ *    There are multiple ways to use this command. The simplest way is
+ *    to use it to move the framebuffer either to elsewhere in the GFB
+ *    (BAR1) memory region, or to a user-defined GMR. This lets a
+ *    driver use a framebuffer allocated entirely out of normal system
+ *    memory, which we encourage.
+ *
+ *    Another way to use this command is to set up a ring buffer of
+ *    updates in GFB memory. If a driver wants to ensure that no
+ *    frames are skipped by the SVGA device, it is important that the
+ *    driver not modify the source data for a blit until the device is
+ *    done processing the command. One efficient way to accomplish
+ *    this is to use a ring of small DMA buffers. Each buffer is used
+ *    for one blit, then we move on to the next buffer in the
+ *    ring. The FENCE mechanism is used to protect each buffer from
+ *    re-use until the device is finished with that buffer's
+ *    corresponding blit.
+ *
+ *    This command does not affect the meaning of SVGA_CMD_UPDATE.
+ *    UPDATEs always occur from the legacy GFB memory area. This
+ *    command has no support for pseudocolor GMRFBs. Currently only
+ *    true-color 15, 16, and 24-bit depths are supported. Future
+ *    devices may expose capabilities for additional framebuffer
+ *    formats.
+ *
+ *    The default GMRFB value is undefined. Drivers must always send
+ *    this command at least once before performing any blit from the
+ *    GMRFB.
+ *
+ * Availability:
+ *    SVGA_FIFO_CAP_SCREEN_OBJECT or SVGA_FIFO_CAP_SCREEN_OBJECT_2
+ */
+
+typedef
+struct {
+   SVGAGuestPtr        ptr;
+   uint32              bytesPerLine;
+   SVGAGMRImageFormat  format;
+} SVGAFifoCmdDefineGMRFB;
+
+
+/*
+ * SVGA_CMD_BLIT_GMRFB_TO_SCREEN --
+ *
+ *    This is a guest-to-host blit. It performs a DMA operation to
+ *    copy a rectangular region of pixels from the current GMRFB to
+ *    one or more Screen Objects.
+ *
+ *    The destination coordinate may be specified relative to a
+ *    screen's origin (if a screen ID is specified) or relative to the
+ *    virtual coordinate system's origin (if the screen ID is
+ *    SVGA_ID_INVALID). The actual destination may span zero or more
+ *    screens, in the case of a virtual destination rect or a rect
+ *    which extends off the edge of the specified screen.
+ *
+ *    This command writes to the screen's "base layer": the underlying
+ *    framebuffer which exists below any cursor or video overlays. No
+ *    action is necessary to explicitly hide or update any overlays
+ *    which exist on top of the updated region.
+ *
+ *    The SVGA device is guaranteed to finish reading from the GMRFB
+ *    by the time any subsequent FENCE commands are reached.
+ *
+ *    This command consumes an annotation. See the
+ *    SVGA_CMD_ANNOTATION_* commands for details.
+ *
+ * Availability:
+ *    SVGA_FIFO_CAP_SCREEN_OBJECT or SVGA_FIFO_CAP_SCREEN_OBJECT_2
+ */
+
+typedef
+struct {
+   SVGASignedPoint  srcOrigin;
+   SVGASignedRect   destRect;
+   uint32           destScreenId;
+} SVGAFifoCmdBlitGMRFBToScreen;
+
+
+/*
+ * SVGA_CMD_BLIT_SCREEN_TO_GMRFB --
+ *
+ *    This is a host-to-guest blit. It performs a DMA operation to
+ *    copy a rectangular region of pixels from a single Screen Object
+ *    back to the current GMRFB.
+ *
+ *    Usage note: This command should be used rarely. It will
+ *    typically be inefficient, but it is necessary for some types of
+ *    synchronization between 3D (GPU) and 2D (CPU) rendering into
+ *    overlapping areas of a screen.
+ *
+ *    The source coordinate is specified relative to a screen's
+ *    origin. The provided screen ID must be valid. If any parameters
+ *    are invalid, the resulting pixel values are undefined.
+ *
+ *    This command reads the screen's "base layer". Overlays like
+ *    video and cursor are not included, but any data which was sent
+ *    using a blit-to-screen primitive will be available, no matter
+ *    whether the data's original source was the GMRFB or the 3D
+ *    acceleration hardware.
+ *
+ *    Note that our guest-to-host blits and host-to-guest blits aren't
+ *    symmetric in their current implementation. While the parameters
+ *    are identical, host-to-guest blits are a lot less featureful.
+ *    They do not support clipping: If the source parameters don't
+ *    fully fit within a screen, the blit fails. They must originate
+ *    from exactly one screen. Virtual coordinates are not directly
+ *    supported.
+ *
+ *    Host-to-guest blits do support the same set of GMRFB formats
+ *    offered by guest-to-host blits.
+ *
+ *    The SVGA device is guaranteed to finish writing to the GMRFB by
+ *    the time any subsequent FENCE commands are reached.
+ *
+ * Availability:
+ *    SVGA_FIFO_CAP_SCREEN_OBJECT or SVGA_FIFO_CAP_SCREEN_OBJECT_2
+ */
+
+typedef
+struct {
+   SVGASignedPoint  destOrigin;
+   SVGASignedRect   srcRect;
+   uint32           srcScreenId;
+} SVGAFifoCmdBlitScreenToGMRFB;
+
+
+/*
+ * SVGA_CMD_ANNOTATION_FILL --
+ *
+ *    This is a blit annotation. This command stores a small piece of
+ *    device state which is consumed by the next blit-to-screen
+ *    command. The state is only cleared by commands which are
+ *    specifically documented as consuming an annotation. Other
+ *    commands (such as ESCAPEs for debugging) may intervene between
+ *    the annotation and its associated blit.
+ *
+ *    This annotation is a promise about the contents of the next
+ *    blit: The video driver is guaranteeing that all pixels in that
+ *    blit will have the same value, specified here as a color in
+ *    SVGAColorBGRX format.
+ *
+ *    The SVGA device can still render the blit correctly even if it
+ *    ignores this annotation, but the annotation may allow it to
+ *    perform the blit more efficiently, for example by ignoring the
+ *    source data and performing a fill in hardware.
+ *
+ *    This annotation is most important for performance when the
+ *    user's display is being remoted over a network connection.
+ *
+ * Availability:
+ *    SVGA_FIFO_CAP_SCREEN_OBJECT or SVGA_FIFO_CAP_SCREEN_OBJECT_2
+ */
+
+typedef
+struct {
+   SVGAColorBGRX  color;
+} SVGAFifoCmdAnnotationFill;
+
+
+/*
+ * SVGA_CMD_ANNOTATION_COPY --
+ *
+ *    This is a blit annotation. See SVGA_CMD_ANNOTATION_FILL for more
+ *    information about annotations.
+ *
+ *    This annotation is a promise about the contents of the next
+ *    blit: The video driver is guaranteeing that all pixels in that
+ *    blit will have the same value as those which already exist at an
+ *    identically-sized region on the same or a different screen.
+ *
+ *    Note that the source pixels for the COPY in this annotation are
+ *    sampled before applying the anqnotation's associated blit. They
+ *    are allowed to overlap with the blit's destination pixels.
+ *
+ *    The copy source rectangle is specified the same way as the blit
+ *    destination: it can be a rectangle which spans zero or more
+ *    screens, specified relative to either a screen or to the virtual
+ *    coordinate system's origin. If the source rectangle includes
+ *    pixels which are not from exactly one screen, the results are
+ *    undefined.
+ *
+ * Availability:
+ *    SVGA_FIFO_CAP_SCREEN_OBJECT or SVGA_FIFO_CAP_SCREEN_OBJECT_2
+ */
+
+typedef
+struct {
+   SVGASignedPoint  srcOrigin;
+   uint32           srcScreenId;
+} SVGAFifoCmdAnnotationCopy;
+
+
+/*
+ * SVGA_CMD_DEFINE_GMR2 --
+ *
+ *    Define guest memory region v2.  See the description of GMRs above.
+ *
+ * Availability:
+ *    SVGA_CAP_GMR2
+ */
+
+typedef
+struct {
+   uint32 gmrId;
+   uint32 numPages;
+} SVGAFifoCmdDefineGMR2;
+
+
+/*
+ * SVGA_CMD_REMAP_GMR2 --
+ *
+ *    Remap guest memory region v2.  See the description of GMRs above.
+ *
+ *    This command allows guest to modify a portion of an existing GMR by
+ *    invalidating it or reassigning it to different guest physical pages.
+ *    The pages are identified by physical page number (PPN).  The pages
+ *    are assumed to be pinned and valid for DMA operations.
+ *
+ *    Description of command flags:
+ *
+ *    SVGA_REMAP_GMR2_VIA_GMR: If enabled, references a PPN list in a GMR.
+ *       The PPN list must not overlap with the remap region (this can be
+ *       handled trivially by referencing a separate GMR).  If flag is
+ *       disabled, PPN list is appended to SVGARemapGMR command.
+ *
+ *    SVGA_REMAP_GMR2_PPN64: If set, PPN list is in PPN64 format, otherwise
+ *       it is in PPN32 format.
+ *
+ *    SVGA_REMAP_GMR2_SINGLE_PPN: If set, PPN list contains a single entry.
+ *       A single PPN can be used to invalidate a portion of a GMR or
+ *       map it to to a single guest scratch page.
+ *
+ * Availability:
+ *    SVGA_CAP_GMR2
+ */
+
+typedef enum {
+   SVGA_REMAP_GMR2_PPN32         = 0,
+   SVGA_REMAP_GMR2_VIA_GMR       = (1 << 0),
+   SVGA_REMAP_GMR2_PPN64         = (1 << 1),
+   SVGA_REMAP_GMR2_SINGLE_PPN    = (1 << 2),
+} SVGARemapGMR2Flags;
+
+typedef
+struct {
+   uint32 gmrId;
+   SVGARemapGMR2Flags flags;
+   uint32 offsetPages; /* offset in pages to begin remap */
+   uint32 numPages; /* number of pages to remap */
+   /*
+    * Followed by additional data depending on SVGARemapGMR2Flags.
+    *
+    * If flag SVGA_REMAP_GMR2_VIA_GMR is set, single SVGAGuestPtr follows.
+    * Otherwise an array of page descriptors in PPN32 or PPN64 format
+    * (according to flag SVGA_REMAP_GMR2_PPN64) follows.  If flag
+    * SVGA_REMAP_GMR2_SINGLE_PPN is set, array contains a single entry.
+    */
+} SVGAFifoCmdRemapGMR2;
+
+#endif