fishHEADmaster

1 files changed, 1228 insertions, 0 deletions

diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
new file mode 100644
index 0000000..4ca2102
--- /dev/null
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -0,0 +1,1228 @@
+/**
+ * Marvell BT-over-SDIO driver: SDIO interface related functions.
+ *
+ * Copyright (C) 2009, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License").  You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
+ * this warranty disclaimer.
+ **/
+
+#include <linux/firmware.h>
+#include <linux/slab.h>
+
+#include <linux/mmc/sdio_ids.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/module.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btmrvl_drv.h"
+#include "btmrvl_sdio.h"
+
+#define VERSION "1.0"
+
+/* The btmrvl_sdio_remove() callback function is called
+ * when user removes this module from kernel space or ejects
+ * the card from the slot. The driver handles these 2 cases
+ * differently.
+ * If the user is removing the module, a MODULE_SHUTDOWN_REQ
+ * command is sent to firmware and interrupt will be disabled.
+ * If the card is removed, there is no need to send command
+ * or disable interrupt.
+ *
+ * The variable 'user_rmmod' is used to distinguish these two
+ * scenarios. This flag is initialized as FALSE in case the card
+ * is removed, and will be set to TRUE for module removal when
+ * module_exit function is called.
+ */
+static u8 user_rmmod;
+static u8 sdio_ireg;
+
+static const struct btmrvl_sdio_card_reg btmrvl_reg_8688 = {
+	.cfg = 0x03,
+	.host_int_mask = 0x04,
+	.host_intstatus = 0x05,
+	.card_status = 0x20,
+	.sq_read_base_addr_a0 = 0x10,
+	.sq_read_base_addr_a1 = 0x11,
+	.card_fw_status0 = 0x40,
+	.card_fw_status1 = 0x41,
+	.card_rx_len = 0x42,
+	.card_rx_unit = 0x43,
+	.io_port_0 = 0x00,
+	.io_port_1 = 0x01,
+	.io_port_2 = 0x02,
+};
+static const struct btmrvl_sdio_card_reg btmrvl_reg_87xx = {
+	.cfg = 0x00,
+	.host_int_mask = 0x02,
+	.host_intstatus = 0x03,
+	.card_status = 0x30,
+	.sq_read_base_addr_a0 = 0x40,
+	.sq_read_base_addr_a1 = 0x41,
+	.card_revision = 0x5c,
+	.card_fw_status0 = 0x60,
+	.card_fw_status1 = 0x61,
+	.card_rx_len = 0x62,
+	.card_rx_unit = 0x63,
+	.io_port_0 = 0x78,
+	.io_port_1 = 0x79,
+	.io_port_2 = 0x7a,
+};
+
+static const struct btmrvl_sdio_card_reg btmrvl_reg_88xx = {
+	.cfg = 0x00,
+	.host_int_mask = 0x02,
+	.host_intstatus = 0x03,
+	.card_status = 0x50,
+	.sq_read_base_addr_a0 = 0x60,
+	.sq_read_base_addr_a1 = 0x61,
+	.card_revision = 0xbc,
+	.card_fw_status0 = 0xc0,
+	.card_fw_status1 = 0xc1,
+	.card_rx_len = 0xc2,
+	.card_rx_unit = 0xc3,
+	.io_port_0 = 0xd8,
+	.io_port_1 = 0xd9,
+	.io_port_2 = 0xda,
+};
+
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
+	.helper		= "mrvl/sd8688_helper.bin",
+	.firmware	= "mrvl/sd8688.bin",
+	.reg		= &btmrvl_reg_8688,
+	.sd_blksz_fw_dl	= 64,
+};
+
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
+	.helper		= NULL,
+	.firmware	= "mrvl/sd8787_uapsta.bin",
+	.reg		= &btmrvl_reg_87xx,
+	.sd_blksz_fw_dl	= 256,
+};
+
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
+	.helper		= NULL,
+	.firmware	= "mrvl/sd8797_uapsta.bin",
+	.reg		= &btmrvl_reg_87xx,
+	.sd_blksz_fw_dl	= 256,
+};
+
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
+	.helper		= NULL,
+	.firmware	= "mrvl/sd8897_uapsta.bin",
+	.reg		= &btmrvl_reg_88xx,
+	.sd_blksz_fw_dl	= 256,
+};
+
+static const struct sdio_device_id btmrvl_sdio_ids[] = {
+	/* Marvell SD8688 Bluetooth device */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9105),
+			.driver_data = (unsigned long) &btmrvl_sdio_sd8688 },
+	/* Marvell SD8787 Bluetooth device */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x911A),
+			.driver_data = (unsigned long) &btmrvl_sdio_sd8787 },
+	/* Marvell SD8787 Bluetooth AMP device */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x911B),
+			.driver_data = (unsigned long) &btmrvl_sdio_sd8787 },
+	/* Marvell SD8797 Bluetooth device */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912A),
+			.driver_data = (unsigned long) &btmrvl_sdio_sd8797 },
+	/* Marvell SD8897 Bluetooth device */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912E),
+			.driver_data = (unsigned long) &btmrvl_sdio_sd8897 },
+
+	{ }	/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(sdio, btmrvl_sdio_ids);
+
+static int btmrvl_sdio_get_rx_unit(struct btmrvl_sdio_card *card)
+{
+	u8 reg;
+	int ret;
+
+	reg = sdio_readb(card->func, card->reg->card_rx_unit, &ret);
+	if (!ret)
+		card->rx_unit = reg;
+
+	return ret;
+}
+
+static int btmrvl_sdio_read_fw_status(struct btmrvl_sdio_card *card, u16 *dat)
+{
+	u8 fws0, fws1;
+	int ret;
+
+	*dat = 0;
+
+	fws0 = sdio_readb(card->func, card->reg->card_fw_status0, &ret);
+	if (ret)
+		return -EIO;
+
+	fws1 = sdio_readb(card->func, card->reg->card_fw_status1, &ret);
+	if (ret)
+		return -EIO;
+
+	*dat = (((u16) fws1) << 8) | fws0;
+
+	return 0;
+}
+
+static int btmrvl_sdio_read_rx_len(struct btmrvl_sdio_card *card, u16 *dat)
+{
+	u8 reg;
+	int ret;
+
+	reg = sdio_readb(card->func, card->reg->card_rx_len, &ret);
+	if (!ret)
+		*dat = (u16) reg << card->rx_unit;
+
+	return ret;
+}
+
+static int btmrvl_sdio_enable_host_int_mask(struct btmrvl_sdio_card *card,
+								u8 mask)
+{
+	int ret;
+
+	sdio_writeb(card->func, mask, card->reg->host_int_mask, &ret);
+	if (ret) {
+		BT_ERR("Unable to enable the host interrupt!");
+		ret = -EIO;
+	}
+
+	return ret;
+}
+
+static int btmrvl_sdio_disable_host_int_mask(struct btmrvl_sdio_card *card,
+								u8 mask)
+{
+	u8 host_int_mask;
+	int ret;
+
+	host_int_mask = sdio_readb(card->func, card->reg->host_int_mask, &ret);
+	if (ret)
+		return -EIO;
+
+	host_int_mask &= ~mask;
+
+	sdio_writeb(card->func, host_int_mask, card->reg->host_int_mask, &ret);
+	if (ret < 0) {
+		BT_ERR("Unable to disable the host interrupt!");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int btmrvl_sdio_poll_card_status(struct btmrvl_sdio_card *card, u8 bits)
+{
+	unsigned int tries;
+	u8 status;
+	int ret;
+
+	for (tries = 0; tries < MAX_POLL_TRIES * 1000; tries++) {
+		status = sdio_readb(card->func, card->reg->card_status,	&ret);
+		if (ret)
+			goto failed;
+		if ((status & bits) == bits)
+			return ret;
+
+		udelay(1);
+	}
+
+	ret = -ETIMEDOUT;
+
+failed:
+	BT_ERR("FAILED! ret=%d", ret);
+
+	return ret;
+}
+
+static int btmrvl_sdio_verify_fw_download(struct btmrvl_sdio_card *card,
+								int pollnum)
+{
+	u16 firmwarestat;
+	int tries, ret;
+
+	 /* Wait for firmware to become ready */
+	for (tries = 0; tries < pollnum; tries++) {
+		sdio_claim_host(card->func);
+		ret = btmrvl_sdio_read_fw_status(card, &firmwarestat);
+		sdio_release_host(card->func);
+		if (ret < 0)
+			continue;
+
+		if (firmwarestat == FIRMWARE_READY)
+			return 0;
+
+		msleep(10);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int btmrvl_sdio_download_helper(struct btmrvl_sdio_card *card)
+{
+	const struct firmware *fw_helper = NULL;
+	const u8 *helper = NULL;
+	int ret;
+	void *tmphlprbuf = NULL;
+	int tmphlprbufsz, hlprblknow, helperlen;
+	u8 *helperbuf;
+	u32 tx_len;
+
+	ret = request_firmware(&fw_helper, card->helper,
+						&card->func->dev);
+	if ((ret < 0) || !fw_helper) {
+		BT_ERR("request_firmware(helper) failed, error code = %d",
+									ret);
+		ret = -ENOENT;
+		goto done;
+	}
+
+	helper = fw_helper->data;
+	helperlen = fw_helper->size;
+
+	BT_DBG("Downloading helper image (%d bytes), block size %d bytes",
+						helperlen, SDIO_BLOCK_SIZE);
+
+	tmphlprbufsz = ALIGN_SZ(BTM_UPLD_SIZE, BTSDIO_DMA_ALIGN);
+
+	tmphlprbuf = kzalloc(tmphlprbufsz, GFP_KERNEL);
+	if (!tmphlprbuf) {
+		BT_ERR("Unable to allocate buffer for helper."
+			" Terminating download");
+		ret = -ENOMEM;
+		goto done;
+	}
+
+	helperbuf = (u8 *) ALIGN_ADDR(tmphlprbuf, BTSDIO_DMA_ALIGN);
+
+	/* Perform helper data transfer */
+	tx_len = (FIRMWARE_TRANSFER_NBLOCK * SDIO_BLOCK_SIZE)
+			- SDIO_HEADER_LEN;
+	hlprblknow = 0;
+
+	do {
+		ret = btmrvl_sdio_poll_card_status(card,
+					    CARD_IO_READY | DN_LD_CARD_RDY);
+		if (ret < 0) {
+			BT_ERR("Helper download poll status timeout @ %d",
+				hlprblknow);
+			goto done;
+		}
+
+		/* Check if there is more data? */
+		if (hlprblknow >= helperlen)
+			break;
+
+		if (helperlen - hlprblknow < tx_len)
+			tx_len = helperlen - hlprblknow;
+
+		/* Little-endian */
+		helperbuf[0] = ((tx_len & 0x000000ff) >> 0);
+		helperbuf[1] = ((tx_len & 0x0000ff00) >> 8);
+		helperbuf[2] = ((tx_len & 0x00ff0000) >> 16);
+		helperbuf[3] = ((tx_len & 0xff000000) >> 24);
+
+		memcpy(&helperbuf[SDIO_HEADER_LEN], &helper[hlprblknow],
+				tx_len);
+
+		/* Now send the data */
+		ret = sdio_writesb(card->func, card->ioport, helperbuf,
+				FIRMWARE_TRANSFER_NBLOCK * SDIO_BLOCK_SIZE);
+		if (ret < 0) {
+			BT_ERR("IO error during helper download @ %d",
+				hlprblknow);
+			goto done;
+		}
+
+		hlprblknow += tx_len;
+	} while (true);
+
+	BT_DBG("Transferring helper image EOF block");
+
+	memset(helperbuf, 0x0, SDIO_BLOCK_SIZE);
+
+	ret = sdio_writesb(card->func, card->ioport, helperbuf,
+							SDIO_BLOCK_SIZE);
+	if (ret < 0) {
+		BT_ERR("IO error in writing helper image EOF block");
+		goto done;
+	}
+
+	ret = 0;
+
+done:
+	kfree(tmphlprbuf);
+	release_firmware(fw_helper);
+	return ret;
+}
+
+static int btmrvl_sdio_download_fw_w_helper(struct btmrvl_sdio_card *card)
+{
+	const struct firmware *fw_firmware = NULL;
+	const u8 *firmware = NULL;
+	int firmwarelen, tmpfwbufsz, ret;
+	unsigned int tries, offset;
+	u8 base0, base1;
+	void *tmpfwbuf = NULL;
+	u8 *fwbuf;
+	u16 len, blksz_dl = card->sd_blksz_fw_dl;
+	int txlen = 0, tx_blocks = 0, count = 0;
+
+	ret = request_firmware(&fw_firmware, card->firmware,
+							&card->func->dev);
+	if ((ret < 0) || !fw_firmware) {
+		BT_ERR("request_firmware(firmware) failed, error code = %d",
+									ret);
+		ret = -ENOENT;
+		goto done;
+	}
+
+	firmware = fw_firmware->data;
+	firmwarelen = fw_firmware->size;
+
+	BT_DBG("Downloading FW image (%d bytes)", firmwarelen);
+
+	tmpfwbufsz = ALIGN_SZ(BTM_UPLD_SIZE, BTSDIO_DMA_ALIGN);
+	tmpfwbuf = kzalloc(tmpfwbufsz, GFP_KERNEL);
+	if (!tmpfwbuf) {
+		BT_ERR("Unable to allocate buffer for firmware."
+		       " Terminating download");
+		ret = -ENOMEM;
+		goto done;
+	}
+
+	/* Ensure aligned firmware buffer */
+	fwbuf = (u8 *) ALIGN_ADDR(tmpfwbuf, BTSDIO_DMA_ALIGN);
+
+	/* Perform firmware data transfer */
+	offset = 0;
+	do {
+		ret = btmrvl_sdio_poll_card_status(card,
+					CARD_IO_READY | DN_LD_CARD_RDY);
+		if (ret < 0) {
+			BT_ERR("FW download with helper poll status"
+						" timeout @ %d", offset);
+			goto done;
+		}
+
+		/* Check if there is more data ? */
+		if (offset >= firmwarelen)
+			break;
+
+		for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
+			base0 = sdio_readb(card->func,
+					card->reg->sq_read_base_addr_a0, &ret);
+			if (ret) {
+				BT_ERR("BASE0 register read failed:"
+					" base0 = 0x%04X(%d)."
+					" Terminating download",
+					base0, base0);
+				ret = -EIO;
+				goto done;
+			}
+			base1 = sdio_readb(card->func,
+					card->reg->sq_read_base_addr_a1, &ret);
+			if (ret) {
+				BT_ERR("BASE1 register read failed:"
+					" base1 = 0x%04X(%d)."
+					" Terminating download",
+					base1, base1);
+				ret = -EIO;
+				goto done;
+			}
+
+			len = (((u16) base1) << 8) | base0;
+			if (len)
+				break;
+
+			udelay(10);
+		}
+
+		if (!len)
+			break;
+		else if (len > BTM_UPLD_SIZE) {
+			BT_ERR("FW download failure @%d, invalid length %d",
+								offset, len);
+			ret = -EINVAL;
+			goto done;
+		}
+
+		txlen = len;
+
+		if (len & BIT(0)) {
+			count++;
+			if (count > MAX_WRITE_IOMEM_RETRY) {
+				BT_ERR("FW download failure @%d, "
+					"over max retry count", offset);
+				ret = -EIO;
+				goto done;
+			}
+			BT_ERR("FW CRC error indicated by the helper: "
+				"len = 0x%04X, txlen = %d", len, txlen);
+			len &= ~BIT(0);
+			/* Set txlen to 0 so as to resend from same offset */
+			txlen = 0;
+		} else {
+			count = 0;
+
+			/* Last block ? */
+			if (firmwarelen - offset < txlen)
+				txlen = firmwarelen - offset;
+
+			tx_blocks = (txlen + blksz_dl - 1) / blksz_dl;
+
+			memcpy(fwbuf, &firmware[offset], txlen);
+		}
+
+		ret = sdio_writesb(card->func, card->ioport, fwbuf,
+						tx_blocks * blksz_dl);
+
+		if (ret < 0) {
+			BT_ERR("FW download, writesb(%d) failed @%d",
+							count, offset);
+			sdio_writeb(card->func, HOST_CMD53_FIN,
+						card->reg->cfg, &ret);
+			if (ret)
+				BT_ERR("writeb failed (CFG)");
+		}
+
+		offset += txlen;
+	} while (true);
+
+	BT_DBG("FW download over, size %d bytes", offset);
+
+	ret = 0;
+
+done:
+	kfree(tmpfwbuf);
+	release_firmware(fw_firmware);
+	return ret;
+}
+
+static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
+{
+	u16 buf_len = 0;
+	int ret, num_blocks, blksz;
+	struct sk_buff *skb = NULL;
+	u32 type;
+	u8 *payload = NULL;
+	struct hci_dev *hdev = priv->btmrvl_dev.hcidev;
+	struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+
+	if (!card || !card->func) {
+		BT_ERR("card or function is NULL!");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	/* Read the length of data to be transferred */
+	ret = btmrvl_sdio_read_rx_len(card, &buf_len);
+	if (ret < 0) {
+		BT_ERR("read rx_len failed");
+		ret = -EIO;
+		goto exit;
+	}
+
+	blksz = SDIO_BLOCK_SIZE;
+	num_blocks = DIV_ROUND_UP(buf_len, blksz);
+
+	if (buf_len <= SDIO_HEADER_LEN
+	    || (num_blocks * blksz) > ALLOC_BUF_SIZE) {
+		BT_ERR("invalid packet length: %d", buf_len);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	/* Allocate buffer */
+	skb = bt_skb_alloc(num_blocks * blksz + BTSDIO_DMA_ALIGN, GFP_ATOMIC);
+	if (skb == NULL) {
+		BT_ERR("No free skb");
+		goto exit;
+	}
+
+	if ((unsigned long) skb->data & (BTSDIO_DMA_ALIGN - 1)) {
+		skb_put(skb, (unsigned long) skb->data &
+					(BTSDIO_DMA_ALIGN - 1));
+		skb_pull(skb, (unsigned long) skb->data &
+					(BTSDIO_DMA_ALIGN - 1));
+	}
+
+	payload = skb->data;
+
+	ret = sdio_readsb(card->func, payload, card->ioport,
+			  num_blocks * blksz);
+	if (ret < 0) {
+		BT_ERR("readsb failed: %d", ret);
+		ret = -EIO;
+		goto exit;
+	}
+
+	/* This is SDIO specific header length: byte[2][1][0], type: byte[3]
+	 * (HCI_COMMAND = 1, ACL_DATA = 2, SCO_DATA = 3, 0xFE = Vendor)
+	 */
+
+	buf_len = payload[0];
+	buf_len |= payload[1] << 8;
+	buf_len |= payload[2] << 16;
+
+	if (buf_len > blksz * num_blocks) {
+		BT_ERR("Skip incorrect packet: hdrlen %d buffer %d",
+		       buf_len, blksz * num_blocks);
+		ret = -EIO;
+		goto exit;
+	}
+
+	type = payload[3];
+
+	switch (type) {
+	case HCI_ACLDATA_PKT:
+	case HCI_SCODATA_PKT:
+	case HCI_EVENT_PKT:
+		bt_cb(skb)->pkt_type = type;
+		skb->dev = (void *)hdev;
+		skb_put(skb, buf_len);
+		skb_pull(skb, SDIO_HEADER_LEN);
+
+		if (type == HCI_EVENT_PKT) {
+			if (btmrvl_check_evtpkt(priv, skb))
+				hci_recv_frame(skb);
+		} else {
+			hci_recv_frame(skb);
+		}
+
+		hdev->stat.byte_rx += buf_len;
+		break;
+
+	case MRVL_VENDOR_PKT:
+		bt_cb(skb)->pkt_type = HCI_VENDOR_PKT;
+		skb->dev = (void *)hdev;
+		skb_put(skb, buf_len);
+		skb_pull(skb, SDIO_HEADER_LEN);
+
+		if (btmrvl_process_event(priv, skb))
+			hci_recv_frame(skb);
+
+		hdev->stat.byte_rx += buf_len;
+		break;
+
+	default:
+		BT_ERR("Unknown packet type:%d", type);
+		BT_ERR("hex: %*ph", blksz * num_blocks, payload);
+
+		kfree_skb(skb);
+		skb = NULL;
+		break;
+	}
+
+exit:
+	if (ret) {
+		hdev->stat.err_rx++;
+		kfree_skb(skb);
+	}
+
+	return ret;
+}
+
+static int btmrvl_sdio_process_int_status(struct btmrvl_private *priv)
+{
+	ulong flags;
+	u8 ireg;
+	struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+
+	spin_lock_irqsave(&priv->driver_lock, flags);
+	ireg = sdio_ireg;
+	sdio_ireg = 0;
+	spin_unlock_irqrestore(&priv->driver_lock, flags);
+
+	sdio_claim_host(card->func);
+	if (ireg & DN_LD_HOST_INT_STATUS) {
+		if (priv->btmrvl_dev.tx_dnld_rdy)
+			BT_DBG("tx_done already received: "
+				" int_status=0x%x", ireg);
+		else
+			priv->btmrvl_dev.tx_dnld_rdy = true;
+	}
+
+	if (ireg & UP_LD_HOST_INT_STATUS)
+		btmrvl_sdio_card_to_host(priv);
+
+	sdio_release_host(card->func);
+
+	return 0;
+}
+
+static void btmrvl_sdio_interrupt(struct sdio_func *func)
+{
+	struct btmrvl_private *priv;
+	struct btmrvl_sdio_card *card;
+	ulong flags;
+	u8 ireg = 0;
+	int ret;
+
+	card = sdio_get_drvdata(func);
+	if (!card || !card->priv) {
+		BT_ERR("sbi_interrupt(%p) card or priv is "
+				"NULL, card=%p\n", func, card);
+		return;
+	}
+
+	priv = card->priv;
+
+	ireg = sdio_readb(card->func, card->reg->host_intstatus, &ret);
+	if (ret) {
+		BT_ERR("sdio_readb: read int status register failed");
+		return;
+	}
+
+	if (ireg != 0) {
+		/*
+		 * DN_LD_HOST_INT_STATUS and/or UP_LD_HOST_INT_STATUS
+		 * Clear the interrupt status register and re-enable the
+		 * interrupt.
+		 */
+		BT_DBG("ireg = 0x%x", ireg);
+
+		sdio_writeb(card->func, ~(ireg) & (DN_LD_HOST_INT_STATUS |
+					UP_LD_HOST_INT_STATUS),
+				card->reg->host_intstatus, &ret);
+		if (ret) {
+			BT_ERR("sdio_writeb: clear int status register failed");
+			return;
+		}
+	}
+
+	spin_lock_irqsave(&priv->driver_lock, flags);
+	sdio_ireg |= ireg;
+	spin_unlock_irqrestore(&priv->driver_lock, flags);
+
+	btmrvl_interrupt(priv);
+}
+
+static int btmrvl_sdio_register_dev(struct btmrvl_sdio_card *card)
+{
+	struct sdio_func *func;
+	u8 reg;
+	int ret = 0;
+
+	if (!card || !card->func) {
+		BT_ERR("Error: card or function is NULL!");
+		ret = -EINVAL;
+		goto failed;
+	}
+
+	func = card->func;
+
+	sdio_claim_host(func);
+
+	ret = sdio_enable_func(func);
+	if (ret) {
+		BT_ERR("sdio_enable_func() failed: ret=%d", ret);
+		ret = -EIO;
+		goto release_host;
+	}
+
+	ret = sdio_claim_irq(func, btmrvl_sdio_interrupt);
+	if (ret) {
+		BT_ERR("sdio_claim_irq failed: ret=%d", ret);
+		ret = -EIO;
+		goto disable_func;
+	}
+
+	ret = sdio_set_block_size(card->func, SDIO_BLOCK_SIZE);
+	if (ret) {
+		BT_ERR("cannot set SDIO block size");
+		ret = -EIO;
+		goto release_irq;
+	}
+
+	reg = sdio_readb(func, card->reg->io_port_0, &ret);
+	if (ret < 0) {
+		ret = -EIO;
+		goto release_irq;
+	}
+
+	card->ioport = reg;
+
+	reg = sdio_readb(func, card->reg->io_port_1, &ret);
+	if (ret < 0) {
+		ret = -EIO;
+		goto release_irq;
+	}
+
+	card->ioport |= (reg << 8);
+
+	reg = sdio_readb(func, card->reg->io_port_2, &ret);
+	if (ret < 0) {
+		ret = -EIO;
+		goto release_irq;
+	}
+
+	card->ioport |= (reg << 16);
+
+	BT_DBG("SDIO FUNC%d IO port: 0x%x", func->num, card->ioport);
+
+	sdio_set_drvdata(func, card);
+
+	sdio_release_host(func);
+
+	return 0;
+
+release_irq:
+	sdio_release_irq(func);
+
+disable_func:
+	sdio_disable_func(func);
+
+release_host:
+	sdio_release_host(func);
+
+failed:
+	return ret;
+}
+
+static int btmrvl_sdio_unregister_dev(struct btmrvl_sdio_card *card)
+{
+	if (card && card->func) {
+		sdio_claim_host(card->func);
+		sdio_release_irq(card->func);
+		sdio_disable_func(card->func);
+		sdio_release_host(card->func);
+		sdio_set_drvdata(card->func, NULL);
+	}
+
+	return 0;
+}
+
+static int btmrvl_sdio_enable_host_int(struct btmrvl_sdio_card *card)
+{
+	int ret;
+
+	if (!card || !card->func)
+		return -EINVAL;
+
+	sdio_claim_host(card->func);
+
+	ret = btmrvl_sdio_enable_host_int_mask(card, HIM_ENABLE);
+
+	btmrvl_sdio_get_rx_unit(card);
+
+	sdio_release_host(card->func);
+
+	return ret;
+}
+
+static int btmrvl_sdio_disable_host_int(struct btmrvl_sdio_card *card)
+{
+	int ret;
+
+	if (!card || !card->func)
+		return -EINVAL;
+
+	sdio_claim_host(card->func);
+
+	ret = btmrvl_sdio_disable_host_int_mask(card, HIM_DISABLE);
+
+	sdio_release_host(card->func);
+
+	return ret;
+}
+
+static int btmrvl_sdio_host_to_card(struct btmrvl_private *priv,
+				u8 *payload, u16 nb)
+{
+	struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+	int ret = 0;
+	int buf_block_len;
+	int blksz;
+	int i = 0;
+	u8 *buf = NULL;
+	void *tmpbuf = NULL;
+	int tmpbufsz;
+
+	if (!card || !card->func) {
+		BT_ERR("card or function is NULL!");
+		return -EINVAL;
+	}
+
+	buf = payload;
+	if ((unsigned long) payload & (BTSDIO_DMA_ALIGN - 1)) {
+		tmpbufsz = ALIGN_SZ(nb, BTSDIO_DMA_ALIGN);
+		tmpbuf = kzalloc(tmpbufsz, GFP_KERNEL);
+		if (!tmpbuf)
+			return -ENOMEM;
+		buf = (u8 *) ALIGN_ADDR(tmpbuf, BTSDIO_DMA_ALIGN);
+		memcpy(buf, payload, nb);
+	}
+
+	blksz = SDIO_BLOCK_SIZE;
+	buf_block_len = (nb + blksz - 1) / blksz;
+
+	sdio_claim_host(card->func);
+
+	do {
+		/* Transfer data to card */
+		ret = sdio_writesb(card->func, card->ioport, buf,
+				   buf_block_len * blksz);
+		if (ret < 0) {
+			i++;
+			BT_ERR("i=%d writesb failed: %d", i, ret);
+			BT_ERR("hex: %*ph", nb, payload);
+			ret = -EIO;
+			if (i > MAX_WRITE_IOMEM_RETRY)
+				goto exit;
+		}
+	} while (ret);
+
+	priv->btmrvl_dev.tx_dnld_rdy = false;
+
+exit:
+	sdio_release_host(card->func);
+	kfree(tmpbuf);
+
+	return ret;
+}
+
+static int btmrvl_sdio_download_fw(struct btmrvl_sdio_card *card)
+{
+	int ret;
+	u8 fws0;
+	int pollnum = MAX_POLL_TRIES;
+
+	if (!card || !card->func) {
+		BT_ERR("card or function is NULL!");
+		return -EINVAL;
+	}
+
+	if (!btmrvl_sdio_verify_fw_download(card, 1)) {
+		BT_DBG("Firmware already downloaded!");
+		return 0;
+	}
+
+	sdio_claim_host(card->func);
+
+	/* Check if other function driver is downloading the firmware */
+	fws0 = sdio_readb(card->func, card->reg->card_fw_status0, &ret);
+	if (ret) {
+		BT_ERR("Failed to read FW downloading status!");
+		ret = -EIO;
+		goto done;
+	}
+	if (fws0) {
+		BT_DBG("BT not the winner (%#x). Skip FW downloading", fws0);
+
+		/* Give other function more time to download the firmware */
+		pollnum *= 10;
+	} else {
+		if (card->helper) {
+			ret = btmrvl_sdio_download_helper(card);
+			if (ret) {
+				BT_ERR("Failed to download helper!");
+				ret = -EIO;
+				goto done;
+			}
+		}
+
+		if (btmrvl_sdio_download_fw_w_helper(card)) {
+			BT_ERR("Failed to download firmware!");
+			ret = -EIO;
+			goto done;
+		}
+	}
+
+	sdio_release_host(card->func);
+
+	/*
+	 * winner or not, with this test the FW synchronizes when the
+	 * module can continue its initialization
+	 */
+	if (btmrvl_sdio_verify_fw_download(card, pollnum)) {
+		BT_ERR("FW failed to be active in time!");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+
+done:
+	sdio_release_host(card->func);
+	return ret;
+}
+
+static int btmrvl_sdio_wakeup_fw(struct btmrvl_private *priv)
+{
+	struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+	int ret = 0;
+
+	if (!card || !card->func) {
+		BT_ERR("card or function is NULL!");
+		return -EINVAL;
+	}
+
+	sdio_claim_host(card->func);
+
+	sdio_writeb(card->func, HOST_POWER_UP, card->reg->cfg, &ret);
+
+	sdio_release_host(card->func);
+
+	BT_DBG("wake up firmware");
+
+	return ret;
+}
+
+static int btmrvl_sdio_probe(struct sdio_func *func,
+					const struct sdio_device_id *id)
+{
+	int ret = 0;
+	struct btmrvl_private *priv = NULL;
+	struct btmrvl_sdio_card *card = NULL;
+
+	BT_INFO("vendor=0x%x, device=0x%x, class=%d, fn=%d",
+			id->vendor, id->device, id->class, func->num);
+
+	card = devm_kzalloc(&func->dev, sizeof(*card), GFP_KERNEL);
+	if (!card)
+		return -ENOMEM;
+
+	card->func = func;
+
+	if (id->driver_data) {
+		struct btmrvl_sdio_device *data = (void *) id->driver_data;
+		card->helper = data->helper;
+		card->firmware = data->firmware;
+		card->reg = data->reg;
+		card->sd_blksz_fw_dl = data->sd_blksz_fw_dl;
+	}
+
+	if (btmrvl_sdio_register_dev(card) < 0) {
+		BT_ERR("Failed to register BT device!");
+		return -ENODEV;
+	}
+
+	/* Disable the interrupts on the card */
+	btmrvl_sdio_disable_host_int(card);
+
+	if (btmrvl_sdio_download_fw(card)) {
+		BT_ERR("Downloading firmware failed!");
+		ret = -ENODEV;
+		goto unreg_dev;
+	}
+
+	btmrvl_sdio_enable_host_int(card);
+
+	priv = btmrvl_add_card(card);
+	if (!priv) {
+		BT_ERR("Initializing card failed!");
+		ret = -ENODEV;
+		goto disable_host_int;
+	}
+
+	card->priv = priv;
+
+	/* Initialize the interface specific function pointers */
+	priv->hw_host_to_card = btmrvl_sdio_host_to_card;
+	priv->hw_wakeup_firmware = btmrvl_sdio_wakeup_fw;
+	priv->hw_process_int_status = btmrvl_sdio_process_int_status;
+
+	if (btmrvl_register_hdev(priv)) {
+		BT_ERR("Register hdev failed!");
+		ret = -ENODEV;
+		goto disable_host_int;
+	}
+
+	priv->btmrvl_dev.psmode = 1;
+	btmrvl_enable_ps(priv);
+
+	priv->btmrvl_dev.gpio_gap = 0xffff;
+	btmrvl_send_hscfg_cmd(priv);
+
+	return 0;
+
+disable_host_int:
+	btmrvl_sdio_disable_host_int(card);
+unreg_dev:
+	btmrvl_sdio_unregister_dev(card);
+	return ret;
+}
+
+static void btmrvl_sdio_remove(struct sdio_func *func)
+{
+	struct btmrvl_sdio_card *card;
+
+	if (func) {
+		card = sdio_get_drvdata(func);
+		if (card) {
+			/* Send SHUTDOWN command & disable interrupt
+			 * if user removes the module.
+			 */
+			if (user_rmmod) {
+				btmrvl_send_module_cfg_cmd(card->priv,
+							MODULE_SHUTDOWN_REQ);
+				btmrvl_sdio_disable_host_int(card);
+			}
+			BT_DBG("unregester dev");
+			btmrvl_sdio_unregister_dev(card);
+			btmrvl_remove_card(card->priv);
+		}
+	}
+}
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,34))
+static int btmrvl_sdio_suspend(struct device *dev)
+{
+	struct sdio_func *func = dev_to_sdio_func(dev);
+	struct btmrvl_sdio_card *card;
+	struct btmrvl_private *priv;
+	mmc_pm_flag_t pm_flags;
+	struct hci_dev *hcidev;
+
+	if (func) {
+		pm_flags = sdio_get_host_pm_caps(func);
+		BT_DBG("%s: suspend: PM flags = 0x%x", sdio_func_id(func),
+		       pm_flags);
+		if (!(pm_flags & MMC_PM_KEEP_POWER)) {
+			BT_ERR("%s: cannot remain alive while suspended",
+			       sdio_func_id(func));
+			return -ENOSYS;
+		}
+		card = sdio_get_drvdata(func);
+		if (!card || !card->priv) {
+			BT_ERR("card or priv structure is not valid");
+			return 0;
+		}
+	} else {
+		BT_ERR("sdio_func is not specified");
+		return 0;
+	}
+
+	priv = card->priv;
+
+	if (priv->adapter->hs_state != HS_ACTIVATED) {
+		if (btmrvl_enable_hs(priv)) {
+			BT_ERR("HS not actived, suspend failed!");
+			return -EBUSY;
+		}
+	}
+	hcidev = priv->btmrvl_dev.hcidev;
+	BT_DBG("%s: SDIO suspend", hcidev->name);
+	hci_suspend_dev(hcidev);
+	skb_queue_purge(&priv->adapter->tx_queue);
+
+	priv->adapter->is_suspended = true;
+
+	/* We will keep the power when hs enabled successfully */
+	if (priv->adapter->hs_state == HS_ACTIVATED) {
+		BT_DBG("suspend with MMC_PM_KEEP_POWER");
+		return sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
+	} else {
+		BT_DBG("suspend without MMC_PM_KEEP_POWER");
+		return 0;
+	}
+}
+
+static int btmrvl_sdio_resume(struct device *dev)
+{
+	struct sdio_func *func = dev_to_sdio_func(dev);
+	struct btmrvl_sdio_card *card;
+	struct btmrvl_private *priv;
+	mmc_pm_flag_t pm_flags;
+	struct hci_dev *hcidev;
+
+	if (func) {
+		pm_flags = sdio_get_host_pm_caps(func);
+		BT_DBG("%s: resume: PM flags = 0x%x", sdio_func_id(func),
+		       pm_flags);
+		card = sdio_get_drvdata(func);
+		if (!card || !card->priv) {
+			BT_ERR("card or priv structure is not valid");
+			return 0;
+		}
+	} else {
+		BT_ERR("sdio_func is not specified");
+		return 0;
+	}
+	priv = card->priv;
+
+	if (!priv->adapter->is_suspended) {
+		BT_DBG("device already resumed");
+		return 0;
+	}
+
+	priv->adapter->is_suspended = false;
+	hcidev = priv->btmrvl_dev.hcidev;
+	BT_DBG("%s: SDIO resume", hcidev->name);
+	hci_resume_dev(hcidev);
+	priv->hw_wakeup_firmware(priv);
+	priv->adapter->hs_state = HS_DEACTIVATED;
+	BT_DBG("%s: HS DEACTIVATED in resume!", hcidev->name);
+
+	return 0;
+}
+
+static const struct dev_pm_ops btmrvl_sdio_pm_ops = {
+	.suspend	= btmrvl_sdio_suspend,
+	.resume		= btmrvl_sdio_resume,
+};
+#endif
+
+static struct sdio_driver bt_mrvl_sdio = {
+	.name		= "btmrvl_sdio",
+	.id_table	= btmrvl_sdio_ids,
+	.probe		= btmrvl_sdio_probe,
+	.remove		= btmrvl_sdio_remove,
+	.drv = {
+		.owner = THIS_MODULE,
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,34))
+		.pm = &btmrvl_sdio_pm_ops,
+#endif
+	}
+};
+
+static int __init btmrvl_sdio_init_module(void)
+{
+	if (sdio_register_driver(&bt_mrvl_sdio) != 0) {
+		BT_ERR("SDIO Driver Registration Failed");
+		return -ENODEV;
+	}
+
+	/* Clear the flag in case user removes the card. */
+	user_rmmod = 0;
+
+	return 0;
+}
+
+static void __exit btmrvl_sdio_exit_module(void)
+{
+	/* Set the flag as user is removing this module. */
+	user_rmmod = 1;
+
+	sdio_unregister_driver(&bt_mrvl_sdio);
+}
+
+module_init(btmrvl_sdio_init_module);
+module_exit(btmrvl_sdio_exit_module);
+
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_DESCRIPTION("Marvell BT-over-SDIO driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL v2");
+MODULE_FIRMWARE("mrvl/sd8688_helper.bin");
+MODULE_FIRMWARE("mrvl/sd8688.bin");
+MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
+MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
+MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin");