aboutsummaryrefslogtreecommitdiffstats
path: root/tests
diff options
context:
space:
mode:
Diffstat (limited to 'tests')
-rw-r--r--tests/anlogic/.gitignore4
-rw-r--r--tests/anlogic/add_sub.v13
-rw-r--r--tests/anlogic/add_sub.ys10
-rw-r--r--tests/anlogic/counter.v17
-rw-r--r--tests/anlogic/counter.ys11
-rw-r--r--tests/anlogic/dffs.v15
-rw-r--r--tests/anlogic/dffs.ys20
-rw-r--r--tests/anlogic/fsm.v55
-rw-r--r--tests/anlogic/fsm.ys15
-rw-r--r--tests/anlogic/latches.v24
-rw-r--r--tests/anlogic/latches.ys33
-rw-r--r--tests/anlogic/memory.v21
-rw-r--r--tests/anlogic/memory.ys21
-rw-r--r--tests/anlogic/mux.v65
-rw-r--r--tests/anlogic/mux.ys42
-rwxr-xr-xtests/anlogic/run-test.sh20
-rw-r--r--tests/anlogic/shifter.v16
-rw-r--r--tests/anlogic/shifter.ys10
-rw-r--r--tests/anlogic/tribuf.v8
-rw-r--r--tests/anlogic/tribuf.ys9
20 files changed, 429 insertions, 0 deletions
diff --git a/tests/anlogic/.gitignore b/tests/anlogic/.gitignore
new file mode 100644
index 000000000..9a71dca69
--- /dev/null
+++ b/tests/anlogic/.gitignore
@@ -0,0 +1,4 @@
+*.log
+/run-test.mk
++*_synth.v
++*_testbench
diff --git a/tests/anlogic/add_sub.v b/tests/anlogic/add_sub.v
new file mode 100644
index 000000000..177c32e30
--- /dev/null
+++ b/tests/anlogic/add_sub.v
@@ -0,0 +1,13 @@
+module top
+(
+ input [3:0] x,
+ input [3:0] y,
+
+ output [3:0] A,
+ output [3:0] B
+ );
+
+assign A = x + y;
+assign B = x - y;
+
+endmodule
diff --git a/tests/anlogic/add_sub.ys b/tests/anlogic/add_sub.ys
new file mode 100644
index 000000000..b8b67cc46
--- /dev/null
+++ b/tests/anlogic/add_sub.ys
@@ -0,0 +1,10 @@
+read_verilog add_sub.v
+hierarchy -top top
+proc
+equiv_opt -assert -map +/anlogic/cells_sim.v synth_anlogic # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+select -assert-count 10 t:AL_MAP_ADDER
+select -assert-count 4 t:AL_MAP_LUT1
+
+select -assert-none t:AL_MAP_LUT1 t:AL_MAP_ADDER %% t:* %D
diff --git a/tests/anlogic/counter.v b/tests/anlogic/counter.v
new file mode 100644
index 000000000..52852f8ac
--- /dev/null
+++ b/tests/anlogic/counter.v
@@ -0,0 +1,17 @@
+module top (
+out,
+clk,
+reset
+);
+ output [7:0] out;
+ input clk, reset;
+ reg [7:0] out;
+
+ always @(posedge clk, posedge reset)
+ if (reset) begin
+ out <= 8'b0 ;
+ end else
+ out <= out + 1;
+
+
+endmodule
diff --git a/tests/anlogic/counter.ys b/tests/anlogic/counter.ys
new file mode 100644
index 000000000..036fdba46
--- /dev/null
+++ b/tests/anlogic/counter.ys
@@ -0,0 +1,11 @@
+read_verilog counter.v
+hierarchy -top top
+proc
+flatten
+equiv_opt -map +/anlogic/cells_sim.v synth_anlogic # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+
+select -assert-count 9 t:AL_MAP_ADDER
+select -assert-count 8 t:AL_MAP_SEQ
+select -assert-none t:AL_MAP_SEQ t:AL_MAP_ADDER %% t:* %D
diff --git a/tests/anlogic/dffs.v b/tests/anlogic/dffs.v
new file mode 100644
index 000000000..3418787c9
--- /dev/null
+++ b/tests/anlogic/dffs.v
@@ -0,0 +1,15 @@
+module dff
+ ( input d, clk, output reg q );
+ always @( posedge clk )
+ q <= d;
+endmodule
+
+module dffe
+ ( input d, clk, en, output reg q );
+ initial begin
+ q = 0;
+ end
+ always @( posedge clk )
+ if ( en )
+ q <= d;
+endmodule
diff --git a/tests/anlogic/dffs.ys b/tests/anlogic/dffs.ys
new file mode 100644
index 000000000..9cbe5fce7
--- /dev/null
+++ b/tests/anlogic/dffs.ys
@@ -0,0 +1,20 @@
+read_verilog dffs.v
+design -save read
+
+hierarchy -top dff
+proc
+equiv_opt -assert -map +/anlogic/cells_sim.v synth_anlogic # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd dff # Constrain all select calls below inside the top module
+select -assert-count 1 t:AL_MAP_SEQ
+select -assert-none t:AL_MAP_SEQ %% t:* %D
+
+design -load read
+hierarchy -top dffe
+proc
+equiv_opt -assert -map +/anlogic/cells_sim.v synth_anlogic # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd dffe # Constrain all select calls below inside the top module
+select -assert-count 1 t:AL_MAP_LUT3
+select -assert-count 1 t:AL_MAP_SEQ
+select -assert-none t:AL_MAP_LUT3 t:AL_MAP_SEQ %% t:* %D
diff --git a/tests/anlogic/fsm.v b/tests/anlogic/fsm.v
new file mode 100644
index 000000000..368fbaace
--- /dev/null
+++ b/tests/anlogic/fsm.v
@@ -0,0 +1,55 @@
+ module fsm (
+ clock,
+ reset,
+ req_0,
+ req_1,
+ gnt_0,
+ gnt_1
+ );
+ input clock,reset,req_0,req_1;
+ output gnt_0,gnt_1;
+ wire clock,reset,req_0,req_1;
+ reg gnt_0,gnt_1;
+
+ parameter SIZE = 3 ;
+ parameter IDLE = 3'b001,GNT0 = 3'b010,GNT1 = 3'b100,GNT2 = 3'b101 ;
+
+ reg [SIZE-1:0] state;
+ reg [SIZE-1:0] next_state;
+
+ always @ (posedge clock)
+ begin : FSM
+ if (reset == 1'b1) begin
+ state <= #1 IDLE;
+ gnt_0 <= 0;
+ gnt_1 <= 0;
+ end else
+ case(state)
+ IDLE : if (req_0 == 1'b1) begin
+ state <= #1 GNT0;
+ gnt_0 <= 1;
+ end else if (req_1 == 1'b1) begin
+ gnt_1 <= 1;
+ state <= #1 GNT0;
+ end else begin
+ state <= #1 IDLE;
+ end
+ GNT0 : if (req_0 == 1'b1) begin
+ state <= #1 GNT0;
+ end else begin
+ gnt_0 <= 0;
+ state <= #1 IDLE;
+ end
+ GNT1 : if (req_1 == 1'b1) begin
+ state <= #1 GNT2;
+ gnt_1 <= req_0;
+ end
+ GNT2 : if (req_0 == 1'b1) begin
+ state <= #1 GNT1;
+ gnt_1 <= req_1;
+ end
+ default : state <= #1 IDLE;
+ endcase
+ end
+
+endmodule
diff --git a/tests/anlogic/fsm.ys b/tests/anlogic/fsm.ys
new file mode 100644
index 000000000..452ef9251
--- /dev/null
+++ b/tests/anlogic/fsm.ys
@@ -0,0 +1,15 @@
+read_verilog fsm.v
+hierarchy -top fsm
+proc
+#flatten
+#ERROR: Found 4 unproven $equiv cells in 'equiv_status -assert'.
+#equiv_opt -assert -map +/anlogic/cells_sim.v synth_anlogic # equivalency check
+equiv_opt -map +/anlogic/cells_sim.v synth_anlogic # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd fsm # Constrain all select calls below inside the top module
+select -assert-count 1 t:AL_MAP_LUT2
+select -assert-count 5 t:AL_MAP_LUT5
+select -assert-count 1 t:AL_MAP_LUT6
+select -assert-count 6 t:AL_MAP_SEQ
+
+select -assert-none t:AL_MAP_LUT2 t:AL_MAP_LUT5 t:AL_MAP_LUT6 t:AL_MAP_SEQ %% t:* %D
diff --git a/tests/anlogic/latches.v b/tests/anlogic/latches.v
new file mode 100644
index 000000000..adb5d5319
--- /dev/null
+++ b/tests/anlogic/latches.v
@@ -0,0 +1,24 @@
+module latchp
+ ( input d, clk, en, output reg q );
+ always @*
+ if ( en )
+ q <= d;
+endmodule
+
+module latchn
+ ( input d, clk, en, output reg q );
+ always @*
+ if ( !en )
+ q <= d;
+endmodule
+
+module latchsr
+ ( input d, clk, en, clr, pre, output reg q );
+ always @*
+ if ( clr )
+ q <= 1'b0;
+ else if ( pre )
+ q <= 1'b1;
+ else if ( en )
+ q <= d;
+endmodule
diff --git a/tests/anlogic/latches.ys b/tests/anlogic/latches.ys
new file mode 100644
index 000000000..c00c7a25d
--- /dev/null
+++ b/tests/anlogic/latches.ys
@@ -0,0 +1,33 @@
+read_verilog latches.v
+design -save read
+
+hierarchy -top latchp
+proc
+# Can't run any sort of equivalence check because latches are blown to LUTs
+synth_anlogic
+cd latchp # Constrain all select calls below inside the top module
+select -assert-count 1 t:AL_MAP_LUT3
+
+select -assert-none t:AL_MAP_LUT3 %% t:* %D
+
+
+design -load read
+hierarchy -top latchn
+proc
+# Can't run any sort of equivalence check because latches are blown to LUTs
+synth_anlogic
+cd latchn # Constrain all select calls below inside the top module
+select -assert-count 1 t:AL_MAP_LUT3
+
+select -assert-none t:AL_MAP_LUT3 %% t:* %D
+
+
+design -load read
+hierarchy -top latchsr
+proc
+# Can't run any sort of equivalence check because latches are blown to LUTs
+synth_anlogic
+cd latchsr # Constrain all select calls below inside the top module
+select -assert-count 1 t:AL_MAP_LUT5
+
+select -assert-none t:AL_MAP_LUT5 %% t:* %D
diff --git a/tests/anlogic/memory.v b/tests/anlogic/memory.v
new file mode 100644
index 000000000..cb7753f7b
--- /dev/null
+++ b/tests/anlogic/memory.v
@@ -0,0 +1,21 @@
+module top
+(
+ input [7:0] data_a,
+ input [6:1] addr_a,
+ input we_a, clk,
+ output reg [7:0] q_a
+);
+ // Declare the RAM variable
+ reg [7:0] ram[63:0];
+
+ // Port A
+ always @ (posedge clk)
+ begin
+ if (we_a)
+ begin
+ ram[addr_a] <= data_a;
+ q_a <= data_a;
+ end
+ q_a <= ram[addr_a];
+ end
+endmodule
diff --git a/tests/anlogic/memory.ys b/tests/anlogic/memory.ys
new file mode 100644
index 000000000..8c0ce844e
--- /dev/null
+++ b/tests/anlogic/memory.ys
@@ -0,0 +1,21 @@
+read_verilog memory.v
+hierarchy -top top
+proc
+memory -nomap
+equiv_opt -run :prove -map +/anlogic/cells_sim.v synth_anlogic
+memory
+opt -full
+
+miter -equiv -flatten -make_assert -make_outputs gold gate miter
+#ERROR: Failed to import cell gate.mem.0.0.0 (type EG_LOGIC_DRAM16X4) to SAT database.
+#sat -verify -prove-asserts -seq 3 -set-init-zero -show-inputs -show-outputs miter
+
+design -load postopt
+cd top
+
+select -assert-count 8 t:AL_MAP_LUT2
+select -assert-count 8 t:AL_MAP_LUT4
+select -assert-count 8 t:AL_MAP_LUT5
+select -assert-count 36 t:AL_MAP_SEQ
+select -assert-count 8 t:EG_LOGIC_DRAM16X4 #Why not AL_LOGIC_BRAM?
+select -assert-none t:AL_MAP_LUT2 t:AL_MAP_LUT4 t:AL_MAP_LUT5 t:AL_MAP_SEQ t:EG_LOGIC_DRAM16X4 %% t:* %D
diff --git a/tests/anlogic/mux.v b/tests/anlogic/mux.v
new file mode 100644
index 000000000..27bc0bf0b
--- /dev/null
+++ b/tests/anlogic/mux.v
@@ -0,0 +1,65 @@
+module mux2 (S,A,B,Y);
+ input S;
+ input A,B;
+ output reg Y;
+
+ always @(*)
+ Y = (S)? B : A;
+endmodule
+
+module mux4 ( S, D, Y );
+
+input[1:0] S;
+input[3:0] D;
+output Y;
+
+reg Y;
+wire[1:0] S;
+wire[3:0] D;
+
+always @*
+begin
+ case( S )
+ 0 : Y = D[0];
+ 1 : Y = D[1];
+ 2 : Y = D[2];
+ 3 : Y = D[3];
+ endcase
+end
+
+endmodule
+
+module mux8 ( S, D, Y );
+
+input[2:0] S;
+input[7:0] D;
+output Y;
+
+reg Y;
+wire[2:0] S;
+wire[7:0] D;
+
+always @*
+begin
+ case( S )
+ 0 : Y = D[0];
+ 1 : Y = D[1];
+ 2 : Y = D[2];
+ 3 : Y = D[3];
+ 4 : Y = D[4];
+ 5 : Y = D[5];
+ 6 : Y = D[6];
+ 7 : Y = D[7];
+ endcase
+end
+
+endmodule
+
+module mux16 (D, S, Y);
+ input [15:0] D;
+ input [3:0] S;
+ output Y;
+
+assign Y = D[S];
+
+endmodule
diff --git a/tests/anlogic/mux.ys b/tests/anlogic/mux.ys
new file mode 100644
index 000000000..64ed2a2bd
--- /dev/null
+++ b/tests/anlogic/mux.ys
@@ -0,0 +1,42 @@
+read_verilog mux.v
+design -save read
+
+hierarchy -top mux2
+proc
+equiv_opt -assert -map +/anlogic/cells_sim.v synth_anlogic # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mux2 # Constrain all select calls below inside the top module
+select -assert-count 1 t:AL_MAP_LUT3
+
+select -assert-none t:AL_MAP_LUT3 %% t:* %D
+
+design -load read
+hierarchy -top mux4
+proc
+equiv_opt -assert -map +/anlogic/cells_sim.v synth_anlogic # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mux4 # Constrain all select calls below inside the top module
+select -assert-count 1 t:AL_MAP_LUT6
+
+select -assert-none t:AL_MAP_LUT6 %% t:* %D
+
+design -load read
+hierarchy -top mux8
+proc
+equiv_opt -assert -map +/anlogic/cells_sim.v synth_anlogic # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mux8 # Constrain all select calls below inside the top module
+select -assert-count 3 t:AL_MAP_LUT4
+select -assert-count 1 t:AL_MAP_LUT6
+
+select -assert-none t:AL_MAP_LUT4 t:AL_MAP_LUT6 %% t:* %D
+
+design -load read
+hierarchy -top mux16
+proc
+equiv_opt -assert -map +/anlogic/cells_sim.v synth_anlogic # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mux16 # Constrain all select calls below inside the top module
+select -assert-count 5 t:AL_MAP_LUT6
+
+select -assert-none t:AL_MAP_LUT6 %% t:* %D
diff --git a/tests/anlogic/run-test.sh b/tests/anlogic/run-test.sh
new file mode 100755
index 000000000..46716f9a0
--- /dev/null
+++ b/tests/anlogic/run-test.sh
@@ -0,0 +1,20 @@
+#!/usr/bin/env bash
+set -e
+{
+echo "all::"
+for x in *.ys; do
+ echo "all:: run-$x"
+ echo "run-$x:"
+ echo " @echo 'Running $x..'"
+ echo " @../../yosys -ql ${x%.ys}.log -w 'Yosys has only limited support for tri-state logic at the moment.' $x"
+done
+for s in *.sh; do
+ if [ "$s" != "run-test.sh" ]; then
+ echo "all:: run-$s"
+ echo "run-$s:"
+ echo " @echo 'Running $s..'"
+ echo " @bash $s"
+ fi
+done
+} > run-test.mk
+exec ${MAKE:-make} -f run-test.mk
diff --git a/tests/anlogic/shifter.v b/tests/anlogic/shifter.v
new file mode 100644
index 000000000..04ae49d83
--- /dev/null
+++ b/tests/anlogic/shifter.v
@@ -0,0 +1,16 @@
+module top (
+out,
+clk,
+in
+);
+ output [7:0] out;
+ input signed clk, in;
+ reg signed [7:0] out = 0;
+
+ always @(posedge clk)
+ begin
+ out <= out >> 1;
+ out[7] <= in;
+ end
+
+endmodule
diff --git a/tests/anlogic/shifter.ys b/tests/anlogic/shifter.ys
new file mode 100644
index 000000000..5eaed30a3
--- /dev/null
+++ b/tests/anlogic/shifter.ys
@@ -0,0 +1,10 @@
+read_verilog shifter.v
+hierarchy -top top
+proc
+flatten
+equiv_opt -assert -map +/anlogic/cells_sim.v synth_anlogic # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+select -assert-count 8 t:AL_MAP_SEQ
+
+select -assert-none t:AL_MAP_SEQ %% t:* %D
diff --git a/tests/anlogic/tribuf.v b/tests/anlogic/tribuf.v
new file mode 100644
index 000000000..90dd314e4
--- /dev/null
+++ b/tests/anlogic/tribuf.v
@@ -0,0 +1,8 @@
+module tristate (en, i, o);
+ input en;
+ input i;
+ output o;
+
+ assign o = en ? i : 1'bz;
+
+endmodule
diff --git a/tests/anlogic/tribuf.ys b/tests/anlogic/tribuf.ys
new file mode 100644
index 000000000..0eb1338ac
--- /dev/null
+++ b/tests/anlogic/tribuf.ys
@@ -0,0 +1,9 @@
+read_verilog tribuf.v
+hierarchy -top tristate
+proc
+flatten
+equiv_opt -assert -map +/anlogic/cells_sim.v -map +/simcells.v synth_anlogic # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd tristate # Constrain all select calls below inside the top module
+select -assert-count 1 t:$_TBUF_
+select -assert-none t:$_TBUF_ %% t:* %D
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 14:02:01 +0000