diff options
Diffstat (limited to 'tests/arch')
| -rw-r--r-- | tests/arch/ecp5/memories.ys | 153 |
1 files changed, 18 insertions, 135 deletions
diff --git a/tests/arch/ecp5/memories.ys b/tests/arch/ecp5/memories.ys index 44651ba25..5cddcb952 100644 --- a/tests/arch/ecp5/memories.ys +++ b/tests/arch/ecp5/memories.ys @@ -1,11 +1,11 @@ # ================================ RAM ================================ -# RAM bits <= 18K; Data width <= 36; Address width <= 9: -> PDPW16KD +# RAM bits <= 18K; Data width <= 36; Address width <= 9: -> DP16KD design -reset; read_verilog -defer ../common/blockram.v chparam -set ADDRESS_WIDTH 9 -set DATA_WIDTH 36 sync_ram_sdp hierarchy -top sync_ram_sdp synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp -select -assert-count 1 t:PDPW16KD +select -assert-count 1 t:DP16KD ## With parameters @@ -13,7 +13,7 @@ design -reset; read_verilog -defer ../common/blockram.v chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_ram_sdp hierarchy -top sync_ram_sdp synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp -select -assert-count 0 t:PDPW16KD # too inefficient +select -assert-count 0 t:DP16KD # too inefficient select -assert-count 9 t:TRELLIS_DPR16X4 design -reset; read_verilog -defer ../common/blockram.v @@ -21,28 +21,29 @@ chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_ram_sdp hierarchy -top sync_ram_sdp setattr -set syn_ramstyle "block_ram" m:memory synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp -select -assert-count 1 t:PDPW16KD +select -assert-count 1 t:DP16KD design -reset; read_verilog -defer ../common/blockram.v chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_ram_sdp hierarchy -top sync_ram_sdp setattr -set syn_ramstyle "Block_RAM" m:memory synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp -select -assert-count 1 t:PDPW16KD # any case works +select -assert-count 1 t:DP16KD # any case works design -reset; read_verilog -defer ../common/blockram.v chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_ram_sdp hierarchy -top sync_ram_sdp setattr -set ram_block 1 m:memory synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp -select -assert-count 1 t:PDPW16KD +select -assert-count 0 t:DP16KD +select -assert-count 9 t:TRELLIS_DPR16X4 design -reset; read_verilog -defer ../common/blockram.v chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_ram_sdp hierarchy -top sync_ram_sdp setattr -set syn_ramstyle "registers" m:memory synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp -select -assert-count 0 t:PDPW16KD # requested FFRAM explicitly +select -assert-count 0 t:DP16KD # requested FFRAM explicitly select -assert-count 180 t:TRELLIS_FF design -reset; read_verilog -defer ../common/blockram.v @@ -50,37 +51,9 @@ chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_ram_sdp hierarchy -top sync_ram_sdp setattr -set logic_block 1 m:memory synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp -select -assert-count 0 t:PDPW16KD # requested FFRAM explicitly +select -assert-count 0 t:DP16KD # requested FFRAM explicitly select -assert-count 180 t:TRELLIS_FF -design -reset; read_verilog -defer ../common/blockram.v -chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_ram_sdp -hierarchy -top sync_ram_sdp -setattr -set syn_romstyle "ebr" m:memory -synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp -select -assert-count 1 t:$mem_v2 # requested BROM but this is a RAM - -design -reset; read_verilog -defer ../common/blockram.v -chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_ram_sdp -hierarchy -top sync_ram_sdp -setattr -set rom_block 1 m:memory -synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp -select -assert-count 1 t:$mem_v2 # requested BROM but this is a RAM - -design -reset; read_verilog -defer ../common/blockram.v -chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_ram_sdp -hierarchy -top sync_ram_sdp -setattr -set syn_ramstyle "block_ram" m:memory -synth_ecp5 -top sync_ram_sdp -nobram; cd sync_ram_sdp -select -assert-count 1 t:$mem_v2 # requested BRAM but BRAM is disabled - -design -reset; read_verilog -defer ../common/blockram.v -chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_ram_sdp -hierarchy -top sync_ram_sdp -setattr -set ram_block 1 m:memory -synth_ecp5 -top sync_ram_sdp -nobram; cd sync_ram_sdp -select -assert-count 1 t:$mem_v2 # requested BRAM but BRAM is disabled - # RAM bits <= 18K; Data width <= 18; Address width <= 10: -> DP16KD design -reset; read_verilog -defer ../common/blockram.v @@ -141,7 +114,8 @@ chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 18 sync_ram_sdp hierarchy -top sync_ram_sdp setattr -set ram_block 1 m:memory synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp -select -assert-count 1 t:DP16KD +select -assert-count 0 t:DP16KD # too inefficient +select -assert-count 5 t:TRELLIS_DPR16X4 design -reset; read_verilog -defer ../common/blockram.v chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 18 sync_ram_sdp @@ -159,34 +133,6 @@ synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp select -assert-count 0 t:DP16KD # requested FFRAM explicitly select -assert-count 90 t:TRELLIS_FF -design -reset; read_verilog -defer ../common/blockram.v -chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 18 sync_ram_sdp -hierarchy -top sync_ram_sdp -setattr -set syn_romstyle "ebr" m:memory -synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp -select -assert-count 1 t:$mem_v2 # requested BROM but this is a RAM - -design -reset; read_verilog -defer ../common/blockram.v -chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 18 sync_ram_sdp -hierarchy -top sync_ram_sdp -setattr -set rom_block 1 m:memory -synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp -select -assert-count 1 t:$mem_v2 # requested BROM but this is a RAM - -design -reset; read_verilog -defer ../common/blockram.v -chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 18 sync_ram_sdp -hierarchy -top sync_ram_sdp -setattr -set syn_ramstyle "block_ram" m:memory -synth_ecp5 -top sync_ram_sdp -nobram; cd sync_ram_sdp -select -assert-count 1 t:$mem_v2 # requested BRAM but BRAM is disabled - -design -reset; read_verilog -defer ../common/blockram.v -chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 18 sync_ram_sdp -hierarchy -top sync_ram_sdp -setattr -set ram_block 1 m:memory -synth_ecp5 -top sync_ram_sdp -nobram; cd sync_ram_sdp -select -assert-count 1 t:$mem_v2 # requested BRAM but BRAM is disabled - # RAM bits <= 64; Data width <= 4; Address width <= 4: -> DPR16X4 design -reset; read_verilog -defer ../common/blockram.v @@ -220,21 +166,14 @@ synth_ecp5 -top sync_ram_sdp; cd sync_ram_sdp select -assert-count 0 t:TRELLIS_DPR16X4 # requested FFRAM explicitly select -assert-count 68 t:TRELLIS_FF -design -reset; read_verilog -defer ../common/blockram.v -chparam -set ADDRESS_WIDTH 4 -set DATA_WIDTH 4 sync_ram_sdp -hierarchy -top sync_ram_sdp -setattr -set syn_ramstyle "distributed" m:memory -synth_ecp5 -top sync_ram_sdp -nolutram; cd sync_ram_sdp -select -assert-count 1 t:$mem_v2 # requested LUTRAM but LUTRAM is disabled - # ================================ ROM ================================ -# ROM bits <= 18K; Data width <= 36; Address width <= 9: -> PDPW16KD +# ROM bits <= 18K; Data width <= 36; Address width <= 9: -> DP16KD design -reset; read_verilog -defer ../common/blockrom.v chparam -set ADDRESS_WIDTH 9 -set DATA_WIDTH 36 sync_rom hierarchy -top sync_rom synth_ecp5 -top sync_rom; cd sync_rom -select -assert-count 1 t:PDPW16KD +select -assert-count 1 t:DP16KD ## With parameters @@ -242,7 +181,7 @@ design -reset; read_verilog -defer ../common/blockrom.v chparam -set ADDRESS_WIDTH 3 -set DATA_WIDTH 36 sync_rom hierarchy -top sync_rom synth_ecp5 -top sync_rom; cd sync_rom -select -assert-count 0 t:PDPW16KD # too inefficient +select -assert-count 0 t:DP16KD # too inefficient select -assert-min 18 t:LUT4 design -reset; read_verilog -defer ../common/blockrom.v @@ -250,21 +189,21 @@ chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_rom hierarchy -top sync_rom setattr -set syn_romstyle "ebr" m:memory synth_ecp5 -top sync_rom; cd sync_rom -select -assert-count 1 t:PDPW16KD +select -assert-count 1 t:DP16KD design -reset; read_verilog -defer ../common/blockrom.v chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_rom hierarchy -top sync_rom setattr -set rom_block 1 m:memory synth_ecp5 -top sync_rom; cd sync_rom -select -assert-count 1 t:PDPW16KD +select -assert-count 1 t:DP16KD design -reset; read_verilog -defer ../common/blockrom.v chparam -set ADDRESS_WIDTH 3 -set DATA_WIDTH 36 sync_rom hierarchy -top sync_rom setattr -set syn_romstyle "logic" m:memory synth_ecp5 -top sync_rom; cd sync_rom -select -assert-count 0 t:PDPW16KD # requested LUTROM explicitly +select -assert-count 0 t:DP16KD # requested LUTROM explicitly select -assert-min 18 t:LUT4 design -reset; read_verilog -defer ../common/blockrom.v @@ -272,37 +211,9 @@ chparam -set ADDRESS_WIDTH 3 -set DATA_WIDTH 36 sync_rom hierarchy -top sync_rom setattr -set logic_block 1 m:memory synth_ecp5 -top sync_rom; cd sync_rom -select -assert-count 0 t:PDPW16KD # requested LUTROM explicitly +select -assert-count 0 t:DP16KD # requested LUTROM explicitly select -assert-min 18 t:LUT4 -design -reset; read_verilog -defer ../common/blockrom.v -chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_rom -hierarchy -top sync_rom -setattr -set syn_ramstyle "block_ram" m:memory -synth_ecp5 -top sync_rom; cd sync_rom -select -assert-count 1 t:$mem_v2 # requested BRAM but this is a ROM - -design -reset; read_verilog -defer ../common/blockrom.v -chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_rom -hierarchy -top sync_rom -setattr -set ram_block 1 m:memory -synth_ecp5 -top sync_rom; cd sync_rom -select -assert-count 1 t:$mem_v2 # requested BRAM but this is a ROM - -design -reset; read_verilog -defer ../common/blockrom.v -chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_rom -hierarchy -top sync_rom -setattr -set syn_ramstyle "block_rom" m:memory -synth_ecp5 -top sync_rom -nobram; cd sync_rom -select -assert-count 1 t:$mem_v2 # requested BROM but BRAM is disabled - -design -reset; read_verilog -defer ../common/blockrom.v -chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 36 sync_rom -hierarchy -top sync_rom -setattr -set rom_block 1 m:memory -synth_ecp5 -top sync_rom -nobram; cd sync_rom -select -assert-count 1 t:$mem_v2 # requested BROM but BRAM is disabled - # ROM bits <= 18K; Data width <= 18; Address width <= 10: -> DP16KD design -reset; read_verilog -defer ../common/blockrom.v @@ -349,31 +260,3 @@ setattr -set logic_block 1 m:memory synth_ecp5 -top sync_rom; cd sync_rom select -assert-count 0 t:DP16KD # requested LUTROM explicitly select -assert-min 9 t:LUT4 - -design -reset; read_verilog -defer ../common/blockrom.v -chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 18 sync_rom -hierarchy -top sync_rom -setattr -set syn_ramstyle "block_ram" m:memory -synth_ecp5 -top sync_rom; cd sync_rom -select -assert-count 1 t:$mem_v2 # requested BRAM but this is a ROM - -design -reset; read_verilog -defer ../common/blockrom.v -chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 18 sync_rom -hierarchy -top sync_rom -setattr -set ram_block 1 m:memory -synth_ecp5 -top sync_rom; cd sync_rom -select -assert-count 1 t:$mem_v2 # requested BRAM but this is a ROM - -design -reset; read_verilog -defer ../common/blockrom.v -chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 18 sync_rom -hierarchy -top sync_rom -setattr -set syn_ramstyle "block_rom" m:memory -synth_ecp5 -top sync_rom -nobram; cd sync_rom -select -assert-count 1 t:$mem_v2 # requested BROM but BRAM is disabled - -design -reset; read_verilog -defer ../common/blockrom.v -chparam -set ADDRESS_WIDTH 2 -set DATA_WIDTH 18 sync_rom -hierarchy -top sync_rom -setattr -set rom_block 1 m:memory -synth_ecp5 -top sync_rom -nobram; cd sync_rom -select -assert-count 1 t:$mem_v2 # requested BROM but BRAM is disabled |