diff options
Diffstat (limited to 'techlibs')
| -rw-r--r-- | techlibs/xilinx/abc9_map.v | 356 | ||||
| -rw-r--r-- | techlibs/xilinx/abc9_model.v | 7 | ||||
| -rw-r--r-- | techlibs/xilinx/abc9_unmap.v | 8 | ||||
| -rw-r--r-- | techlibs/xilinx/abc9_xc7.box | 51 | ||||
| -rw-r--r-- | techlibs/xilinx/cells_sim.v | 82 | ||||
| -rw-r--r-- | techlibs/xilinx/synth_xilinx.cc | 20 |
6 files changed, 476 insertions, 48 deletions
diff --git a/techlibs/xilinx/abc9_map.v b/techlibs/xilinx/abc9_map.v index 0eac08f3f..49000ea25 100644 --- a/techlibs/xilinx/abc9_map.v +++ b/techlibs/xilinx/abc9_map.v @@ -18,7 +18,361 @@ * */ -// ============================================================================ +// The following techmapping rules are intended to be run (with -max_iter 1) +// before invoking the `abc9` pass in order to transform the design into +// a format that it understands. +// +// For example, (complex) flip-flops are expected to be described as an +// combinatorial box (containing all control logic such as clock enable +// or synchronous resets) followed by a basic D-Q flop. +// Yosys will automatically analyse the simulation model (described in +// cells_sim.v) and detach any $_DFF_P_ or $_DFF_N_ cells present in +// order to extract the combinatorial control logic left behind. +// Specifically, a simulation model similar to the one below: +// +// ++===================================++ +// || Sim model || +// || /\/\/\/\ || +// D -->>-----< > +------+ || +// R -->>-----< Comb. > |$_DFF_| || +// CE -->>-----< logic >-----| [NP]_|---+---->>-- Q +// || +--< > +------+ | || +// || | \/\/\/\/ | || +// || | | || +// || +----------------------------+ || +// || || +// ++===================================++ +// +// is transformed into: +// +// ++==================++ +// || Comb box || +// || || +// || /\/\/\/\ || +// D -->>-----< > || +------+ +// R -->>-----< Comb. > || |$__ABC| +// CE -->>-----< logic >--->>-- $nextQ --| _FF_ |--+-->> Q +// $abc9_currQ +-->>-----< > || +------+ | +// | || \/\/\/\/ || | +// | || || | +// | ++==================++ | +// | | +// +----------------------------------------------+ +// +// The purpose of the following FD* rules are to wrap the flop with: +// (a) a special $__ABC9_FF_ in front of the FD*'s output, indicating to abc9 +// the connectivity of its basic D-Q flop +// (b) an optional $__ABC9_ASYNC_ cell in front of $__ABC_FF_'s output to +// capture asynchronous behaviour +// (c) a special _TECHMAP_REPLACE_.$abc9_clock wire to capture its clock +// domain and polarity (used when partitioning the module so that `abc9' only +// performs sequential synthesis (with reachability analysis) correctly on +// one domain at a time) and also used to infer the optional delay target +// from the (* abc9_clock_period = %d *) attribute attached to any wire +// within +// (d) a special _TECHMAP_REPLACE_.$abc9_init wire to encode the flop's initial +// state +// (e) a special _TECHMAP_REPLACE_.$abc9_currQ wire that will be used for feedback +// into the (combinatorial) FD* cell to facilitate clock-enable behaviour +// +// In order to perform sequential synthesis, `abc9' also requires that +// the initial value of all flops be zero. + +module FDRE (output Q, input C, CE, D, R); + parameter [0:0] INIT = 1'b0; + parameter [0:0] IS_C_INVERTED = 1'b0; + parameter [0:0] IS_D_INVERTED = 1'b0; + parameter [0:0] IS_R_INVERTED = 1'b0; + wire QQ, $nextQ; + generate if (INIT == 1'b1) begin + assign Q = ~QQ; + FDSE #( + .INIT(1'b0), + .IS_C_INVERTED(IS_C_INVERTED), + .IS_D_INVERTED(IS_D_INVERTED), + .IS_S_INVERTED(IS_R_INVERTED) + ) _TECHMAP_REPLACE_ ( + .D(~D), .Q($nextQ), .C(C), .CE(CE), .S(R) + ); + end + else begin + assign Q = QQ; + FDRE #( + .INIT(1'b0), + .IS_C_INVERTED(IS_C_INVERTED), + .IS_D_INVERTED(IS_D_INVERTED), + .IS_R_INVERTED(IS_R_INVERTED) + ) _TECHMAP_REPLACE_ ( + .D(D), .Q($nextQ), .C(C), .CE(CE), .R(R) + ); + end + endgenerate + \$__ABC9_FF_ abc_dff (.D($nextQ), .Q(QQ)); + + // Special signals + wire [1:0] _TECHMAP_REPLACE_.$abc9_clock = {C, IS_C_INVERTED}; + wire [0:0] _TECHMAP_REPLACE_.$abc9_init = 1'b0; + wire [0:0] _TECHMAP_REPLACE_.$abc9_currQ = QQ; +endmodule +module FDRE_1 (output Q, input C, CE, D, R); + parameter [0:0] INIT = 1'b0; + wire QQ, $nextQ; + generate if (INIT == 1'b1) begin + assign Q = ~QQ; + FDSE_1 #( + .INIT(1'b0) + ) _TECHMAP_REPLACE_ ( + .D(~D), .Q($nextQ), .C(C), .CE(CE), .S(R) + ); + end + else begin + assign Q = QQ; + FDRE_1 #( + .INIT(1'b0) + ) _TECHMAP_REPLACE_ ( + .D(D), .Q($nextQ), .C(C), .CE(CE), .R(R) + ); + end + endgenerate + \$__ABC9_FF_ abc_dff (.D($nextQ), .Q(QQ)); + + // Special signals + wire [1:0] _TECHMAP_REPLACE_.$abc9_clock = {C, 1'b1 /* IS_C_INVERTED */}; + wire [0:0] _TECHMAP_REPLACE_.$abc9_init = 1'b0; + wire [0:0] _TECHMAP_REPLACE_.$abc9_currQ = QQ; +endmodule + +module FDCE (output Q, input C, CE, D, CLR); + parameter [0:0] INIT = 1'b0; + parameter [0:0] IS_C_INVERTED = 1'b0; + parameter [0:0] IS_D_INVERTED = 1'b0; + parameter [0:0] IS_CLR_INVERTED = 1'b0; + wire QQ, $nextQ, $abc9_currQ; + generate if (INIT == 1'b1) begin + assign Q = ~QQ; + FDPE #( + .INIT(1'b0), + .IS_C_INVERTED(IS_C_INVERTED), + .IS_D_INVERTED(IS_D_INVERTED), + .IS_PRE_INVERTED(IS_CLR_INVERTED) + ) _TECHMAP_REPLACE_ ( + .D(~D), .Q($nextQ), .C(C), .CE(CE), .PRE(CLR) + // ^^^ Note that async + // control is not directly + // supported by abc9 but its + // behaviour is captured by + // $__ABC9_ASYNC below + ); + end + else begin + assign Q = QQ; + FDCE #( + .INIT(1'b0), + .IS_C_INVERTED(IS_C_INVERTED), + .IS_D_INVERTED(IS_D_INVERTED), + .IS_CLR_INVERTED(IS_CLR_INVERTED) + ) _TECHMAP_REPLACE_ ( + .D(D), .Q($nextQ), .C(C), .CE(CE), .CLR(CLR) + // ^^^ Note that async + // control is not directly + // supported by abc9 but its + // behaviour is captured by + // $__ABC9_ASYNC below + ); + end endgenerate + \$__ABC9_FF_ abc_dff (.D($nextQ), .Q($abc9_currQ)); + // Since this is an async flop, async behaviour is also dealt with + // using the $_ABC9_ASYNC box by abc9_map.v + \$__ABC9_ASYNC abc_async (.A($abc9_currQ), .S(CLR ^ IS_CLR_INVERTED), .Y(QQ)); + + // Special signals + wire [1:0] _TECHMAP_REPLACE_.$abc9_clock = {C, IS_C_INVERTED}; + wire [0:0] _TECHMAP_REPLACE_.$abc9_init = 1'b0; + wire [0:0] _TECHMAP_REPLACE_.$abc9_currQ = $abc9_currQ; +endmodule +module FDCE_1 (output Q, input C, CE, D, CLR); + parameter [0:0] INIT = 1'b0; + wire QQ, $nextQ, $abc9_currQ; + generate if (INIT == 1'b1) begin + assign Q = ~QQ; + FDPE_1 #( + .INIT(1'b0) + ) _TECHMAP_REPLACE_ ( + .D(~D), .Q($nextQ), .C(C), .CE(CE), .PRE(CLR) + // ^^^ Note that async + // control is not directly + // supported by abc9 but its + // behaviour is captured by + // $__ABC9_ASYNC below + ); + end + else begin + assign Q = QQ; + FDCE_1 #( + .INIT(1'b0) + ) _TECHMAP_REPLACE_ ( + .D(D), .Q($nextQ), .C(C), .CE(CE), .CLR(CLR) + // ^^^ Note that async + // control is not directly + // supported by abc9 but its + // behaviour is captured by + // $__ABC9_ASYNC below + ); + end endgenerate + \$__ABC9_FF_ abc_dff (.D($nextQ), .Q($abc9_currQ)); + \$__ABC9_ASYNC abc_async (.A($abc9_currQ), .S(CLR), .Y(QQ)); + + // Special signals + wire [1:0] _TECHMAP_REPLACE_.$abc9_clock = {C, 1'b1 /* IS_C_INVERTED */}; + wire [0:0] _TECHMAP_REPLACE_.$abc9_init = 1'b0; + wire [0:0] _TECHMAP_REPLACE_.$abc9_currQ = $abc9_currQ; +endmodule + +module FDPE (output Q, input C, CE, D, PRE); + parameter [0:0] INIT = 1'b1; + parameter [0:0] IS_C_INVERTED = 1'b0; + parameter [0:0] IS_D_INVERTED = 1'b0; + parameter [0:0] IS_PRE_INVERTED = 1'b0; + wire QQ, $nextQ, $abc9_currQ; + generate if (INIT == 1'b1) begin + assign Q = ~QQ; + FDCE #( + .INIT(1'b0), + .IS_C_INVERTED(IS_C_INVERTED), + .IS_D_INVERTED(IS_D_INVERTED), + .IS_CLR_INVERTED(IS_PRE_INVERTED), + ) _TECHMAP_REPLACE_ ( + .D(~D), .Q($nextQ), .C(C), .CE(CE), .CLR(PRE) + // ^^^ Note that async + // control is not directly + // supported by abc9 but its + // behaviour is captured by + // $__ABC9_ASYNC below + ); + end + else begin + assign Q = QQ; + FDPE #( + .INIT(1'b0), + .IS_C_INVERTED(IS_C_INVERTED), + .IS_D_INVERTED(IS_D_INVERTED), + .IS_PRE_INVERTED(IS_PRE_INVERTED), + ) _TECHMAP_REPLACE_ ( + .D(D), .Q($nextQ), .C(C), .CE(CE), .PRE(PRE) + // ^^^ Note that async + // control is not directly + // supported by abc9 but its + // behaviour is captured by + // $__ABC9_ASYNC below + ); + end endgenerate + \$__ABC9_FF_ abc_dff (.D($nextQ), .Q($abc9_currQ)); + \$__ABC9_ASYNC abc_async (.A($abc9_currQ), .S(PRE ^ IS_PRE_INVERTED), .Y(QQ)); + + // Special signals + wire [1:0] _TECHMAP_REPLACE_.$abc9_clock = {C, IS_C_INVERTED}; + wire [0:0] _TECHMAP_REPLACE_.$abc9_init = 1'b0; + wire [0:0] _TECHMAP_REPLACE_.$abc9_currQ = $abc9_currQ; +endmodule +module FDPE_1 (output Q, input C, CE, D, PRE); + parameter [0:0] INIT = 1'b1; + wire QQ, $nextQ, $abc9_currQ; + generate if (INIT == 1'b1) begin + assign Q = ~QQ; + FDCE_1 #( + .INIT(1'b0) + ) _TECHMAP_REPLACE_ ( + .D(~D), .Q($nextQ), .C(C), .CE(CE), .CLR(PRE) + // ^^^ Note that async + // control is not directly + // supported by abc9 but its + // behaviour is captured by + // $__ABC9_ASYNC below + ); + end + else begin + assign Q = QQ; + FDPE_1 #( + .INIT(1'b0) + ) _TECHMAP_REPLACE_ ( + .D(D), .Q($nextQ), .C(C), .CE(CE), .PRE(PRE) + // ^^^ Note that async + // control is not directly + // supported by abc9 but its + // behaviour is captured by + // $__ABC9_ASYNC below + ); + end endgenerate + \$__ABC9_FF_ abc_dff (.D($nextQ), .Q($abc9_currQ)); + \$__ABC9_ASYNC abc_async (.A($abc9_currQ), .S(PRE), .Y(QQ)); + + // Special signals + wire [1:0] _TECHMAP_REPLACE_.$abc9_clock = {C, 1'b1 /* IS_C_INVERTED */}; + wire [0:0] _TECHMAP_REPLACE_.$abc9_init = 1'b0; + wire [0:0] _TECHMAP_REPLACE_.$abc9_currQ = $abc9_currQ; +endmodule + +module FDSE (output Q, input C, CE, D, S); + parameter [0:0] INIT = 1'b1; + parameter [0:0] IS_C_INVERTED = 1'b0; + parameter [0:0] IS_D_INVERTED = 1'b0; + parameter [0:0] IS_S_INVERTED = 1'b0; + wire QQ, $nextQ; + generate if (INIT == 1'b1) begin + assign Q = ~QQ; + FDRE #( + .INIT(1'b0), + .IS_C_INVERTED(IS_C_INVERTED), + .IS_D_INVERTED(IS_D_INVERTED), + .IS_R_INVERTED(IS_S_INVERTED) + ) _TECHMAP_REPLACE_ ( + .D(~D), .Q($nextQ), .C(C), .CE(CE), .R(S) + ); + end + else begin + assign Q = QQ; + FDSE #( + .INIT(1'b0), + .IS_C_INVERTED(IS_C_INVERTED), + .IS_D_INVERTED(IS_D_INVERTED), + .IS_S_INVERTED(IS_S_INVERTED) + ) _TECHMAP_REPLACE_ ( + .D(D), .Q($nextQ), .C(C), .CE(CE), .S(S) + ); + end endgenerate + \$__ABC9_FF_ abc_dff (.D($nextQ), .Q(QQ)); + + // Special signals + wire [1:0] _TECHMAP_REPLACE_.$abc9_clock = {C, IS_C_INVERTED}; + wire [0:0] _TECHMAP_REPLACE_.$abc9_init = 1'b0; + wire [0:0] _TECHMAP_REPLACE_.$abc9_currQ = QQ; +endmodule +module FDSE_1 (output Q, input C, CE, D, S); + parameter [0:0] INIT = 1'b1; + wire QQ, $nextQ; + generate if (INIT == 1'b1) begin + assign Q = ~QQ; + FDRE_1 #( + .INIT(1'b0) + ) _TECHMAP_REPLACE_ ( + .D(~D), .Q($nextQ), .C(C), .CE(CE), .R(S) + ); + end + else begin + assign Q = QQ; + FDSE_1 #( + .INIT(1'b0) + ) _TECHMAP_REPLACE_ ( + .D(D), .Q($nextQ), .C(C), .CE(CE), .S(S) + ); + end endgenerate + \$__ABC9_FF_ abc_dff (.D($nextQ), .Q(QQ)); + + // Special signals + wire [1:0] _TECHMAP_REPLACE_.$abc9_clock = {C, 1'b1 /* IS_C_INVERTED */}; + wire [0:0] _TECHMAP_REPLACE_.$abc9_init = 1'b0; + wire [0:0] _TECHMAP_REPLACE_.$abc9_currQ = QQ; +endmodule module RAM32X1D ( output DPO, SPO, diff --git a/techlibs/xilinx/abc9_model.v b/techlibs/xilinx/abc9_model.v index 8c8e1556c..cc0e5ec41 100644 --- a/techlibs/xilinx/abc9_model.v +++ b/techlibs/xilinx/abc9_model.v @@ -30,6 +30,13 @@ module \$__XILINX_MUXF78 (output O, input I0, I1, I2, I3, S0, S1); : (S0 ? I1 : I0); endmodule +module \$__ABC9_FF_ (input D, output Q); +endmodule + +(* abc_box_id = 1000 *) +module \$__ABC9_ASYNC (input A, S, output Y); +endmodule + // Box to emulate comb/seq behaviour of RAMD{32,64} and SRL{16,32} // Necessary since RAMD* and SRL* have both combinatorial (i.e. // same-cycle read operation) and sequential (write operation diff --git a/techlibs/xilinx/abc9_unmap.v b/techlibs/xilinx/abc9_unmap.v index ad6469702..21fe78d08 100644 --- a/techlibs/xilinx/abc9_unmap.v +++ b/techlibs/xilinx/abc9_unmap.v @@ -20,6 +20,14 @@ // ============================================================================ +module \$__ABC9_ASYNC (input A, S, output Y); + assign Y = A; +endmodule + +module \$__ABC9_FF_ (input D, output Q); + assign Q = D; +endmodule + module \$__ABC9_LUT6 (input A, input [5:0] S, output Y); assign Y = A; endmodule diff --git a/techlibs/xilinx/abc9_xc7.box b/techlibs/xilinx/abc9_xc7.box index 774388d49..24b1898a4 100644 --- a/techlibs/xilinx/abc9_xc7.box +++ b/techlibs/xilinx/abc9_xc7.box @@ -41,6 +41,57 @@ CARRY4 4 1 10 8 592 540 520 356 - 512 548 292 - 228 580 526 507 398 385 508 528 378 380 114 +# Box to emulate async behaviour of FD[CP]* +# Inputs: A S +# Outputs: Y +$__ABC9_ASYNC 1000 0 2 1 +0 764 + +# The following FD*.{CE,R,CLR,PRE) are offset by 46ps to +# reflect the -46ps Tsu +# https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L237-L251 +# https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L265-L277 + +# Inputs: C CE D R \$currQ +# Outputs: Q +FDRE 1001 1 5 1 +0 151 0 446 0 + +# Inputs: C CE D R \$currQ +# Outputs: Q +FDRE_1 1002 1 5 1 +0 151 0 446 0 + +# Inputs: C CE CLR D \$currQ +# Outputs: Q +FDCE 1003 1 5 1 +0 151 806 0 0 + +# Inputs: C CE CLR D \$currQ +# Outputs: Q +FDCE_1 1004 1 5 1 +0 151 806 0 0 + +# Inputs: C CE D PRE \$currQ +# Outputs: Q +FDPE 1005 1 5 1 +0 151 0 806 0 + +# Inputs: C CE D PRE \$currQ +# Outputs: Q +FDPE_1 1006 1 5 1 +0 151 0 806 0 + +# Inputs: C CE D S \$currQ +# Outputs: Q +FDSE 1007 1 5 1 +0 151 0 446 0 + +# Inputs: C CE D S \$currQ +# Outputs: Q +FDSE_1 1008 1 5 1 +0 151 0 446 0 + # SLICEM/A6LUT # Box to emulate comb/seq behaviour of RAMD{32,64} and SRL{16,32} # Necessary since RAMD* and SRL* have both combinatorial (i.e. diff --git a/techlibs/xilinx/cells_sim.v b/techlibs/xilinx/cells_sim.v index 3ed0759db..ef963793c 100644 --- a/techlibs/xilinx/cells_sim.v +++ b/techlibs/xilinx/cells_sim.v @@ -283,6 +283,7 @@ endmodule // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLL_L.sdf#L238-L250 +(* abc9_box_id=1001, lib_whitebox, abc9_flop *) module FDRE ( (* abc9_arrival=303 *) output reg Q, @@ -306,29 +307,20 @@ module FDRE ( endcase endgenerate endmodule -module FDSE ( +(* abc9_box_id=1002, lib_whitebox, abc9_flop *) +module FDRE_1 ( (* abc9_arrival=303 *) output reg Q, (* clkbuf_sink *) - (* invertible_pin = "IS_C_INVERTED" *) input C, - input CE, - (* invertible_pin = "IS_D_INVERTED" *) - input D, - (* invertible_pin = "IS_S_INVERTED" *) - input S + input CE, D, R ); - parameter [0:0] INIT = 1'b1; - parameter [0:0] IS_C_INVERTED = 1'b0; - parameter [0:0] IS_D_INVERTED = 1'b0; - parameter [0:0] IS_S_INVERTED = 1'b0; + parameter [0:0] INIT = 1'b0; initial Q <= INIT; - generate case (|IS_C_INVERTED) - 1'b0: always @(posedge C) if (S == !IS_S_INVERTED) Q <= 1'b1; else if (CE) Q <= D ^ IS_D_INVERTED; - 1'b1: always @(negedge C) if (S == !IS_S_INVERTED) Q <= 1'b1; else if (CE) Q <= D ^ IS_D_INVERTED; - endcase endgenerate + always @(negedge C) if (R) Q <= 1'b0; else if (CE) Q <= D; endmodule +(* abc9_box_id=1003, lib_whitebox, abc9_flop *) module FDCE ( (* abc9_arrival=303 *) output reg Q, @@ -354,6 +346,20 @@ module FDCE ( endcase endgenerate endmodule +(* abc9_box_id=1004, lib_whitebox, abc9_flop *) +module FDCE_1 ( + (* abc9_arrival=303 *) + output reg Q, + (* clkbuf_sink *) + input C, + input CE, D, CLR +); + parameter [0:0] INIT = 1'b0; + initial Q <= INIT; + always @(negedge C, posedge CLR) if (CLR) Q <= 1'b0; else if (CE) Q <= D; +endmodule + +(* abc9_box_id=1005, lib_whitebox, abc9_flop *) module FDPE ( (* abc9_arrival=303 *) output reg Q, @@ -379,52 +385,54 @@ module FDPE ( endcase endgenerate endmodule -module FDRE_1 ( - (* abc9_arrival=303 *) - output reg Q, - (* clkbuf_sink *) - input C, - input CE, D, R -); - parameter [0:0] INIT = 1'b0; - initial Q <= INIT; - always @(negedge C) if (R) Q <= 1'b0; else if(CE) Q <= D; -endmodule - -module FDSE_1 ( +(* abc9_box_id=1006, lib_whitebox, abc9_flop *) +module FDPE_1 ( (* abc9_arrival=303 *) output reg Q, (* clkbuf_sink *) input C, - input CE, D, S + input CE, D, PRE ); parameter [0:0] INIT = 1'b1; initial Q <= INIT; - always @(negedge C) if (S) Q <= 1'b1; else if(CE) Q <= D; + always @(negedge C, posedge PRE) if (PRE) Q <= 1'b1; else if (CE) Q <= D; endmodule -module FDCE_1 ( +(* abc9_box_id=1007, lib_whitebox, abc9_flop *) +module FDSE ( (* abc9_arrival=303 *) output reg Q, (* clkbuf_sink *) + (* invertible_pin = "IS_C_INVERTED" *) input C, - input CE, D, CLR + input CE, + (* invertible_pin = "IS_D_INVERTED" *) + input D, + (* invertible_pin = "IS_S_INVERTED" *) + input S ); - parameter [0:0] INIT = 1'b0; + parameter [0:0] INIT = 1'b1; + parameter [0:0] IS_C_INVERTED = 1'b0; + parameter [0:0] IS_D_INVERTED = 1'b0; + parameter [0:0] IS_S_INVERTED = 1'b0; initial Q <= INIT; - always @(negedge C, posedge CLR) if (CLR) Q <= 1'b0; else if (CE) Q <= D; + generate case (|IS_C_INVERTED) + 1'b0: always @(posedge C) if (S == !IS_S_INVERTED) Q <= 1'b1; else if (CE) Q <= D ^ IS_D_INVERTED; + 1'b1: always @(negedge C) if (S == !IS_S_INVERTED) Q <= 1'b1; else if (CE) Q <= D ^ IS_D_INVERTED; + endcase endgenerate endmodule -module FDPE_1 ( +(* abc9_box_id=1008, lib_whitebox, abc9_flop *) +module FDSE_1 ( (* abc9_arrival=303 *) output reg Q, (* clkbuf_sink *) input C, - input CE, D, PRE + input CE, D, S ); parameter [0:0] INIT = 1'b1; initial Q <= INIT; - always @(negedge C, posedge PRE) if (PRE) Q <= 1'b1; else if (CE) Q <= D; + always @(negedge C) if (S) Q <= 1'b1; else if (CE) Q <= D; endmodule module LDCE ( diff --git a/techlibs/xilinx/synth_xilinx.cc b/techlibs/xilinx/synth_xilinx.cc index 2c5686a35..de262c8ad 100644 --- a/techlibs/xilinx/synth_xilinx.cc +++ b/techlibs/xilinx/synth_xilinx.cc @@ -292,10 +292,11 @@ struct SynthXilinxPass : public ScriptPass ff_map_file = "+/xilinx/xc7_ff_map.v"; if (check_label("begin")) { + std::string read_args; if (vpr) - run("read_verilog -lib -D_EXPLICIT_CARRY +/xilinx/cells_sim.v"); - else - run("read_verilog -lib +/xilinx/cells_sim.v"); + read_args += " -D_EXPLICIT_CARRY"; + read_args += " -lib +/xilinx/cells_sim.v"; + run("read_verilog" + read_args); run("read_verilog -lib +/xilinx/cells_xtra.v"); @@ -542,6 +543,7 @@ struct SynthXilinxPass : public ScriptPass else abc9_opts += " -lut +/xilinx/abc9_xc7.lut"; run("abc9" + abc9_opts); + run("techmap -map +/xilinx/abc9_unmap.v"); } else { if (nowidelut) @@ -557,13 +559,10 @@ struct SynthXilinxPass : public ScriptPass run("xilinx_srl -fixed -minlen 3", "(skip if '-nosrl')"); std::string techmap_args = "-map +/xilinx/lut_map.v -map +/xilinx/cells_map.v"; if (help_mode) - techmap_args += " [-map " + ff_map_file + "]"; - else if (abc9) - techmap_args += " -map +/xilinx/abc9_unmap.v"; - else - techmap_args += " -map " + ff_map_file; - run("techmap " + techmap_args); - run("clean"); + techmap_args += stringf("[-map %s]", ff_map_file.c_str()); + else if (!abc9) + techmap_args += stringf(" -map %s", ff_map_file.c_str()); + run("techmap " + techmap_args, "(option without '-abc9')"); } if (check_label("finalize")) { @@ -571,6 +570,7 @@ struct SynthXilinxPass : public ScriptPass run("clkbufmap -buf BUFG O:I ", "(skip if '-noclkbuf')"); if (help_mode || ise) run("extractinv -inv INV O:I", "(only if '-ise')"); + run("clean"); } if (check_label("check")) { |