diff options
Diffstat (limited to 'techlibs/xilinx/cells_sim.v')
-rw-r--r-- | techlibs/xilinx/cells_sim.v | 865 |
1 files changed, 445 insertions, 420 deletions
diff --git a/techlibs/xilinx/cells_sim.v b/techlibs/xilinx/cells_sim.v index f9d837e4c..08142b37f 100644 --- a/techlibs/xilinx/cells_sim.v +++ b/techlibs/xilinx/cells_sim.v @@ -263,46 +263,31 @@ module LUT6_2(output O6, output O5, input I0, I1, I2, I3, I4, I5); endmodule (* abc9_lut=10 *) -module $__ABC9_LUT7(output O, input I0, I1, I2, I3, I4, I5, I6); - parameter [127:0] INIT = 0; - wire [63: 0] s6 = I6 ? INIT[127:64] : INIT[63: 0]; - wire [31: 0] s5 = I5 ? s6[63:32] : s6[31: 0]; - wire [15: 0] s4 = I4 ? s5[31:16] : s5[15: 0]; - wire [ 7: 0] s3 = I3 ? s4[15: 8] : s4[ 7: 0]; - wire [ 3: 0] s2 = I2 ? s3[ 7: 4] : s3[ 3: 0]; - wire [ 1: 0] s1 = I1 ? s2[ 3: 2] : s2[ 1: 0]; - assign O = I0 ? s1[1] : s1[0]; +module \$__ABC9_LUT7 (output O, input I0, I1, I2, I3, I4, I5, I6); specify - (I0 => O) = 1028; - (I1 => O) = 1017; - (I2 => O) = 858; - (I3 => O) = 793; - (I4 => O) = 624; - (I5 => O) = 513; - (I6 => O) = 464; + // https://github.com/SymbiFlow/prjxray-db/blob/1c85daf1b115da4d27ca83c6b89f53a94de39748/artix7/timings/slicel.sdf#L867 + (I0 => O) = 642 + 223 /* to cross MUXF7 */ + 174 /* CMUX */; + (I1 => O) = 631 + 223 /* to cross MUXF7 */ + 174 /* CMUX */; + (I2 => O) = 472 + 223 /* to cross MUXF7 */ + 174 /* CMUX */; + (I3 => O) = 407 + 223 /* to cross MUXF7 */ + 174 /* CMUX */; + (I4 => O) = 238 + 223 /* to cross MUXF7 */ + 174 /* CMUX */; + (I5 => O) = 127 + 223 /* to cross MUXF7 */ + 174 /* CMUX */; + (I6 => O) = 0 + 296 /* to select MUXF7 */ + 174 /* CMUX */; endspecify endmodule (* abc9_lut=20 *) -module $__ABC9_LUT8(output O, input I0, I1, I2, I3, I4, I5, I6, I7); - parameter [255:0] INIT = 0; - wire [127: 0] s7 = I7 ? INIT[255:128] : INIT[127: 0]; - wire [ 63: 0] s6 = I6 ? s7[127:63] : s7[ 64: 0]; - wire [ 31: 0] s5 = I5 ? s6[ 63:32] : s6[ 31: 0]; - wire [ 15: 0] s4 = I4 ? s5[ 31:16] : s5[ 15: 0]; - wire [ 7: 0] s3 = I3 ? s4[ 15: 8] : s4[ 7: 0]; - wire [ 3: 0] s2 = I2 ? s3[ 7: 4] : s3[ 3: 0]; - wire [ 1: 0] s1 = I1 ? s2[ 3: 2] : s2[ 1: 0]; - assign O = I0 ? s1[1] : s1[0]; +module \$__ABC9_LUT8 (output O, input I0, I1, I2, I3, I4, I5, I6, I7); specify - (I0 => O) = 1149; - (I1 => O) = 1138; - (I2 => O) = 979; - (I3 => O) = 914; - (I4 => O) = 745; - (I5 => O) = 634; - (I6 => O) = 585; - (I7 => O) = 468; + // https://github.com/SymbiFlow/prjxray-db/blob/1c85daf1b115da4d27ca83c6b89f53a94de39748/artix7/timings/slicel.sdf#L716 + (I0 => O) = 642 + 223 /* to cross F7BMUX */ + 104 /* to cross F8MUX */ + 192 /* BMUX */; + (I1 => O) = 631 + 223 /* to cross F7BMUX */ + 104 /* to cross F8MUX */ + 192 /* BMUX */; + (I2 => O) = 472 + 223 /* to cross F7BMUX */ + 104 /* to cross F8MUX */ + 192 /* BMUX */; + (I3 => O) = 407 + 223 /* to cross F7BMUX */ + 104 /* to cross F8MUX */ + 192 /* BMUX */; + (I4 => O) = 238 + 223 /* to cross F7BMUX */ + 104 /* to cross F8MUX */ + 192 /* BMUX */; + (I5 => O) = 127 + 223 /* to cross F7BMUX */ + 104 /* to cross F8MUX */ + 192 /* BMUX */; + (I6 => O) = 0 + 296 /* to select F7BMUX */ + 104 /* to cross F8MUX */ + 192 /* BMUX */; + (I7 => O) = 0 + 0 + 273 /* to select F8MUX */ + 192 /* BMUX */; endspecify endmodule @@ -323,9 +308,9 @@ module MUXF7(output O, input I0, I1, S); assign O = S ? I1 : I0; specify // https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLL_L.sdf#L451-L453 - (I0 => O) = 204; - (I1 => O) = 208; - (S => O) = 286; + (I0 => O) = 217; + (I1 => O) = 223; + (S => O) = 296; endspecify endmodule @@ -497,21 +482,23 @@ module FDRE ( 1'b0: always @(posedge C) if (R == !IS_R_INVERTED) Q <= 1'b0; else if (CE) Q <= D ^ IS_D_INVERTED; 1'b1: always @(negedge C) if (R == !IS_R_INVERTED) Q <= 1'b0; else if (CE) Q <= D ^ IS_D_INVERTED; endcase - if (!IS_C_INVERTED) - specify - if (CE) (posedge C => (Q : D)) = 303; - //$setup(D , posedge C, -46); // Negative times not currently supported - $setup(CE, posedge C, 109); - $setup(R , posedge C, 404); - endspecify - else - specify - if (CE) (negedge C => (Q : D)) = 303; - //if (CE) $setup(D , negedge C, -46); // Negative times not currently supported - $setup(CE, negedge C, 109); - $setup(R , negedge C, 404); - endspecify endgenerate + specify + // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L249 + //$setup(D , posedge C &&& CE &&& !IS_C_INVERTED , -46); // Negative times not currently supported + //$setup(D , negedge C &&& CE &&& IS_C_INVERTED , -46); // Negative times not currently supported + // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L248 + $setup(CE, posedge C &&& !IS_C_INVERTED, 109); + $setup(CE, negedge C &&& IS_C_INVERTED , 109); + // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L274 + $setup(R , posedge C &&& !IS_C_INVERTED, 404); + $setup(R , negedge C &&& IS_C_INVERTED, 404); + // https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLL_L.sdf#L243 + if (!IS_C_INVERTED && R ^ IS_R_INVERTED) (posedge C => (Q : 1'b0)) = 303; + if ( IS_C_INVERTED && R ^ IS_R_INVERTED) (negedge C => (Q : 1'b0)) = 303; + if (!IS_C_INVERTED && R ~^ IS_R_INVERTED && CE) (posedge C => (Q : D ^ IS_D_INVERTED)) = 303; + if ( IS_C_INVERTED && R ~^ IS_R_INVERTED && CE) (negedge C => (Q : D ^ IS_D_INVERTED)) = 303; + endspecify endmodule (* abc9_flop, lib_whitebox *) @@ -527,10 +514,14 @@ module FDRE_1 ( initial Q <= INIT; always @(negedge C) if (R) Q <= 1'b0; else if (CE) Q <= D; specify - if (CE) (negedge C => (Q : D)) = 303; - //if (CE) $setup(D , negedge C, -46); // Negative times not currently supported + // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L249 + //$setup(D , negedge C &&& CE, -46); // Negative times not currently supported + // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L248 $setup(CE, negedge C, 109); - $setup(R , negedge C, 404); + // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L274 + $setup(R , negedge C, 404); // https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLL_L.sdf#L243 + if (R) (negedge C => (Q : 1'b0)) = 303; + if (!R && CE) (negedge C => (Q : D)) = 303; endspecify endmodule @@ -556,21 +547,23 @@ module FDSE ( 1'b0: always @(posedge C) if (S == !IS_S_INVERTED) Q <= 1'b1; else if (CE) Q <= D ^ IS_D_INVERTED; 1'b1: always @(negedge C) if (S == !IS_S_INVERTED) Q <= 1'b1; else if (CE) Q <= D ^ IS_D_INVERTED; endcase - if (!IS_C_INVERTED) - specify - if (CE) (posedge C => (Q : D)) = 303; - //if (CE) $setup(D , posedge C, -46); // Negative times not currently supported - $setup(CE, posedge C, 109); - $setup(S , posedge C, 404); - endspecify - else - specify - if (CE) (negedge C => (Q : D)) = 303; - //if (CE) $setup(D , negedge C, -46); // Negative times not currently supported - $setup(CE, negedge C, 109); - $setup(S , negedge C, 404); - endspecify endgenerate + specify + // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L249 + //$setup(D , posedge C &&& !IS_C_INVERTED &&& CE, -46); // Negative times not currently supported + //$setup(D , negedge C &&& IS_C_INVERTED &&& CE, -46); // Negative times not currently supported + // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L248 + $setup(CE, posedge C &&& !IS_C_INVERTED, 109); + $setup(CE, negedge C &&& IS_C_INVERTED, 109); + // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L274 + $setup(S , posedge C &&& !IS_C_INVERTED, 404); + $setup(S , negedge C &&& IS_C_INVERTED, 404); + // https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLL_L.sdf#L243 + if (!IS_C_INVERTED && S ^ IS_S_INVERTED) (posedge C => (Q : 1'b1)) = 303; + if ( IS_C_INVERTED && S ^ IS_S_INVERTED) (negedge C => (Q : 1'b1)) = 303; + if (!IS_C_INVERTED && S ~^ IS_S_INVERTED && CE) (posedge C => (Q : D ^ IS_D_INVERTED)) = 303; + if ( IS_C_INVERTED && S ~^ IS_S_INVERTED && CE) (negedge C => (Q : D ^ IS_D_INVERTED)) = 303; + endspecify endmodule (* abc9_flop, lib_whitebox *) @@ -586,10 +579,15 @@ module FDSE_1 ( initial Q <= INIT; always @(negedge C) if (S) Q <= 1'b1; else if (CE) Q <= D; specify - if (CE) (negedge C => (Q : D)) = 303; - //if (CE) $setup(D , negedge C, -46); // Negative times not currently supported + // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L249 + //$setup(D , negedge C &&& CE, -46); // Negative times not currently supported + // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L248 $setup(CE, negedge C, 109); + // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L274 $setup(S , negedge C, 404); + // https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLL_L.sdf#L243 + if (S) (negedge C => (Q : 1'b1)) = 303; + if (!S && CE) (negedge C => (Q : D)) = 303; endspecify endmodule @@ -652,21 +650,22 @@ module FDCE ( 2'b10: always @(negedge C, posedge CLR) if ( CLR) Q <= 1'b0; else if (CE) Q <= D ^ IS_D_INVERTED; 2'b11: always @(negedge C, negedge CLR) if (!CLR) Q <= 1'b0; else if (CE) Q <= D ^ IS_D_INVERTED; endcase - if (!IS_C_INVERTED) - specify - if (CE) (posedge C => (Q : D)) = 303; - //if (CE) $setup(D , posedge C, -46); // Negative times not currently supported - $setup(CE , posedge C, 109); - $setup(CLR, posedge C, 764); - endspecify - else - specify - if (CE) (negedge C => (Q : D)) = 303; - //if (CE) $setup(D , negedge C, -46); // Negative times not currently supported - $setup(CE , negedge C, 109); - $setup(CLR, negedge C, 764); - endspecify - endgenerate + endgenerate + specify + // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L249 + //$setup(D , posedge C &&& !IS_C_INVERTED &&& CE, -46); // Negative times not currently supported + //$setup(D , negedge C &&& IS_C_INVERTED &&& CE, -46); // Negative times not currently supported + // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L248 + $setup(CE , posedge C &&& !IS_C_INVERTED, 109); + $setup(CE , negedge C &&& IS_C_INVERTED, 109); + $setup(CLR, posedge C &&& !IS_C_INVERTED, 404); + $setup(CLR, negedge C &&& IS_C_INVERTED, 404); + // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L270 + //if (!IS_CLR_INVERTED) (posedge CLR => (Q : 1'b0)) = 764; // Captured by $__ABC9_ASYNC0 + //if ( IS_CLR_INVERTED) (negedge CLR => (Q : 1'b0)) = 764; // Captured by $__ABC9_ASYNC0 + if (!IS_C_INVERTED && CLR ~^ IS_CLR_INVERTED && CE) (posedge C => (Q : D ^ IS_D_INVERTED)) = 303; + if ( IS_C_INVERTED && CLR ~^ IS_CLR_INVERTED && CE) (negedge C => (Q : D ^ IS_D_INVERTED)) = 303; + endspecify endmodule (* abc9_flop, lib_whitebox *) @@ -682,10 +681,14 @@ module FDCE_1 ( initial Q <= INIT; always @(negedge C, posedge CLR) if (CLR) Q <= 1'b0; else if (CE) Q <= D; specify - if (CE) (negedge C => (Q : D)) = 303; - //if (CE) $setup(D , negedge C, -46); // Negative times not currently supported + // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L249 + //$setup(D , negedge C &&& CE, -46); // Negative times not currently supported + // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L248 $setup(CE , negedge C, 109); - $setup(CLR, negedge C, 764); + $setup(CLR, negedge C, 404); + // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L270 + //(posedge CLR => (Q : 1'b0)) = 764; // Captured by $__ABC9_ASYNC0 + if (!CLR && CE) (negedge C => (Q : D)) = 303; endspecify endmodule @@ -712,21 +715,22 @@ module FDPE ( 2'b10: always @(negedge C, posedge PRE) if ( PRE) Q <= 1'b1; else if (CE) Q <= D ^ IS_D_INVERTED; 2'b11: always @(negedge C, negedge PRE) if (!PRE) Q <= 1'b1; else if (CE) Q <= D ^ IS_D_INVERTED; endcase - if (!IS_C_INVERTED) - specify - if (CE) (posedge C => (Q : D)) = 303; - //if (CE) $setup(D , posedge C, -46); // Negative times not currently supported - $setup(CE , posedge C, 109); - $setup(PRE, posedge C, 764); - endspecify - else - specify - if (CE) (negedge C => (Q : D)) = 303; - //if (CE) $setup(D , negedge C, -46); // Negative times not currently supported - $setup(CE , negedge C, 109); - $setup(PRE, negedge C, 764); - endspecify endgenerate + specify + // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L249 + //$setup(D , posedge C &&& !IS_C_INVERTED &&& CE, -46); // Negative times not currently supported + //$setup(D , negedge C &&& IS_C_INVERTED &&& CE, -46); // Negative times not currently supported + // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L248 + $setup(CE , posedge C &&& !IS_C_INVERTED, 109); + $setup(CE , negedge C &&& IS_C_INVERTED, 109); + $setup(PRE, posedge C &&& !IS_C_INVERTED, 404); + $setup(PRE, negedge C &&& IS_C_INVERTED, 404); + // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L270 + //if (!IS_PRE_INVERTED) (posedge PRE => (Q : 1'b1)) = 764; // Captured by $__ABC9_ASYNC1 + //if ( IS_PRE_INVERTED) (negedge PRE => (Q : 1'b1)) = 764; // Captured by $__ABC9_ASYNC1 + if (!IS_C_INVERTED && PRE ~^ IS_PRE_INVERTED && CE) (posedge C => (Q : D ^ IS_D_INVERTED)) = 303; + if ( IS_C_INVERTED && PRE ~^ IS_PRE_INVERTED && CE) (negedge C => (Q : D ^ IS_D_INVERTED)) = 303; + endspecify endmodule (* abc9_flop, lib_whitebox *) @@ -742,10 +746,15 @@ module FDPE_1 ( initial Q <= INIT; always @(negedge C, posedge PRE) if (PRE) Q <= 1'b1; else if (CE) Q <= D; specify - if (CE) (negedge C => (Q : D)) = 303; - //if (CE) $setup(D , negedge C, -46); // Negative times not currently supported + // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L249 + //$setup(D , negedge C &&& CE, -46); // Negative times not currently supported + // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L248 $setup(CE , negedge C, 109); - $setup(PRE, negedge C, 764); + $setup(PRE, negedge C, 404); + // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L270 + //if (!IS_PRE_INVERTED) (posedge PRE => (Q : 1'b1)) = 764; // Captured by $__ABC9_ASYNC1 + //if (IS_PRE_INVERTED) (negedge PRE => (Q : 1'b1)) = 764; // Captured by $__ABC9_ASYNC1 + if (!PRE && CE) (negedge C => (Q : D)) = 303; endspecify endmodule @@ -1375,48 +1384,38 @@ module RAM32X1D ( assign DPO = mem[dpra]; wire clk = WCLK ^ IS_WCLK_INVERTED; always @(posedge clk) if (WE) mem[a] <= D; - generate - if (!IS_WCLK_INVERTED) - specify - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L981 - if (WE) (posedge WCLK => (SPO : D)) = 1153; - if (WE) (posedge WCLK => (DPO : D)) = 1153; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L986 - $setup(D , posedge WCLK, 453); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L834 - $setup(WE, posedge WCLK, 654); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L800 - $setup(A0, posedge WCLK, 245); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L798 - $setup(A1, posedge WCLK, 208); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L796 - $setup(A2, posedge WCLK, 147); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L794 - $setup(A3, posedge WCLK, 68); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L792 - $setup(A4, posedge WCLK, 66); - endspecify - else - specify - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L981 - if (WE) (negedge WCLK => (SPO : D)) = 1153; - if (WE) (negedge WCLK => (DPO : D)) = 1153; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L986 - $setup(D , negedge WCLK, 453); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L834 - $setup(WE, negedge WCLK, 654); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L800 - $setup(A0, negedge WCLK, 245); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L798 - $setup(A1, negedge WCLK, 208); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L796 - $setup(A2, negedge WCLK, 147); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L794 - $setup(A3, negedge WCLK, 68); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L792 - $setup(A4, negedge WCLK, 66); - endspecify - endgenerate + specify + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L986 + $setup(D , posedge WCLK &&& !IS_WCLK_INVERTED && WE, 453); + $setup(D , negedge WCLK &&& IS_WCLK_INVERTED && WE, 453); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L834 + $setup(WE, posedge WCLK &&& !IS_WCLK_INVERTED, 654); + $setup(WE, negedge WCLK &&& IS_WCLK_INVERTED, 654); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L800 + $setup(A0, posedge WCLK &&& !IS_WCLK_INVERTED && WE, 245); + $setup(A0, negedge WCLK &&& IS_WCLK_INVERTED && WE, 245); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L798 + $setup(A1, posedge WCLK &&& !IS_WCLK_INVERTED && WE, 208); + $setup(A1, negedge WCLK &&& IS_WCLK_INVERTED && WE, 208); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L796 + $setup(A2, posedge WCLK &&& !IS_WCLK_INVERTED && WE, 147); + $setup(A2, negedge WCLK &&& IS_WCLK_INVERTED && WE, 147); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L794 + $setup(A3, posedge WCLK &&& !IS_WCLK_INVERTED && WE, 68); + $setup(A3, negedge WCLK &&& IS_WCLK_INVERTED && WE, 68); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L792 + $setup(A4, posedge WCLK &&& !IS_WCLK_INVERTED && WE, 66); + $setup(A4, posedge WCLK &&& IS_WCLK_INVERTED && WE, 66); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L981 + if (!IS_WCLK_INVERTED && WE) (posedge WCLK => ({SPO,DPO} : {D,1'bx})) = 1153; + if ( IS_WCLK_INVERTED && WE) (negedge WCLK => ({SPO,DPO} : {D,1'bx})) = 1153; + // Captured by $__ABC9_RAM6 + //({A0,DPRA0} => {SPO,DPO}) = 642; + //({A1,DPRA1} => {SPO,DPO}) = 631; + //({A2,DPRA2} => {SPO,DPO}) = 472; + //({A3,DPRA3} => {SPO,DPO}) = 407; + //({A4,DPRA4} => {SPO,DPO}) = 238; + endspecify endmodule module RAM32X1D_1 ( @@ -1443,23 +1442,28 @@ module RAM32X1D_1 ( wire clk = WCLK ^ IS_WCLK_INVERTED; always @(negedge clk) if (WE) mem[a] <= D; specify - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L981 - if (WE) (negedge WCLK => (SPO : D)) = 1153; - if (WE) (negedge WCLK => (DPO : D)) = 1153; // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L986 - $setup(D , negedge WCLK, 453); + $setup(D , negedge WCLK &&& WE, 453); // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L834 $setup(WE, negedge WCLK, 654); // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L800 - $setup(A0, negedge WCLK, 245); + $setup(A0, negedge WCLK &&& WE, 245); // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L798 - $setup(A1, negedge WCLK, 208); + $setup(A1, negedge WCLK &&& WE, 208); // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L796 - $setup(A2, negedge WCLK, 147); + $setup(A2, negedge WCLK &&& WE, 147); // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L794 - $setup(A3, negedge WCLK, 68); + $setup(A3, negedge WCLK &&& WE, 68); // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L792 - $setup(A4, negedge WCLK, 66); + $setup(A4, negedge WCLK &&& WE, 66); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L981 + if (WE) (negedge WCLK => ({SPO,DPO} : {D,1'bx})) = 1153; + // Captured by $__ABC9_RAM6 + //({A0,DPRA0} => {SPO,DPO}) = 642; + //({A1,DPRA1} => {SPO,DPO}) = 631; + //({A2,DPRA2} => {SPO,DPO}) = 472; + //({A3,DPRA3} => {SPO,DPO}) = 407; + //({A4,DPRA4} => {SPO,DPO}) = 238; endspecify endmodule @@ -1482,52 +1486,42 @@ module RAM64X1D ( assign DPO = mem[dpra]; wire clk = WCLK ^ IS_WCLK_INVERTED; always @(posedge clk) if (WE) mem[a] <= D; - generate - if (!IS_WCLK_INVERTED) - specify - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L981 - if (WE) (posedge WCLK => (SPO : D)) = 1153; - if (WE) (posedge WCLK => (DPO : D)) = 1153; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L986 - $setup(D , posedge WCLK, 453); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L834 - $setup(WE, posedge WCLK, 654); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L828 - $setup(A0, posedge WCLK, 362); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L826 - $setup(A1, posedge WCLK, 245); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L824 - $setup(A2, posedge WCLK, 208); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L822 - $setup(A3, posedge WCLK, 147); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L820 - $setup(A4, posedge WCLK, 68); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L818 - $setup(A5, posedge WCLK, 66); - endspecify - else - specify - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L981 - if (WE) (negedge WCLK => (SPO : D)) = 1153; - if (WE) (negedge WCLK => (DPO : D)) = 1153; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L986 - $setup(D , negedge WCLK, 453); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L834 - $setup(WE, negedge WCLK, 654); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L828 - $setup(A0, negedge WCLK, 362); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L826 - $setup(A1, negedge WCLK, 245); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L824 - $setup(A2, negedge WCLK, 208); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L822 - $setup(A3, negedge WCLK, 147); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L820 - $setup(A4, negedge WCLK, 68); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L818 - $setup(A5, negedge WCLK, 66); - endspecify - endgenerate + specify + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L986 + $setup(D , posedge WCLK &&& !IS_WCLK_INVERTED && WE, 453); + $setup(D , negedge WCLK &&& IS_WCLK_INVERTED && WE, 453); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L834 + $setup(WE, posedge WCLK &&& !IS_WCLK_INVERTED, 654); + $setup(WE, negedge WCLK &&& IS_WCLK_INVERTED, 654); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L828 + $setup(A0, posedge WCLK &&& !IS_WCLK_INVERTED && WE, 362); + $setup(A0, negedge WCLK &&& IS_WCLK_INVERTED && WE, 362); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L826 + $setup(A1, posedge WCLK &&& !IS_WCLK_INVERTED && WE, 245); + $setup(A1, negedge WCLK &&& IS_WCLK_INVERTED && WE, 245); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L824 + $setup(A2, posedge WCLK &&& !IS_WCLK_INVERTED && WE, 208); + $setup(A2, negedge WCLK &&& IS_WCLK_INVERTED && WE, 208); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L822 + $setup(A3, posedge WCLK &&& !IS_WCLK_INVERTED && WE, 147); + $setup(A3, negedge WCLK &&& IS_WCLK_INVERTED && WE, 147); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L820 + $setup(A4, posedge WCLK &&& !IS_WCLK_INVERTED && WE, 68); + $setup(A4, negedge WCLK &&& IS_WCLK_INVERTED && WE, 68); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L818 + $setup(A5, posedge WCLK &&& !IS_WCLK_INVERTED && WE, 66); + $setup(A5, negedge WCLK &&& IS_WCLK_INVERTED && WE, 66); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L981 + if (!IS_WCLK_INVERTED && WE) (posedge WCLK => ({SPO,DPO} : {D,1'bx})) = 1153; + if ( IS_WCLK_INVERTED && WE) (negedge WCLK => ({SPO,DPO} : {D,1'bx})) = 1153; + // Captured by $__ABC9_RAM6 + //({A0,DPRA0} => {SPO,DPO}) = 642; + //({A1,DPRA1} => {SPO,DPO}) = 631; + //({A2,DPRA2} => {SPO,DPO}) = 472; + //({A3,DPRA3} => {SPO,DPO}) = 407; + //({A4,DPRA4} => {SPO,DPO}) = 238; + //({A5,DPRA5} => {SPO,DPO}) = 127; + endspecify endmodule module RAM64X1D_1 ( @@ -1550,25 +1544,24 @@ module RAM64X1D_1 ( wire clk = WCLK ^ IS_WCLK_INVERTED; always @(negedge clk) if (WE) mem[a] <= D; specify - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L981 - if (WE) (negedge WCLK => (SPO : D)) = 1153; - if (WE) (negedge WCLK => (DPO : D)) = 1153; // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L986 - $setup(D , negedge WCLK, 453); + $setup(D , negedge WCLK &&& WE, 453); // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L834 $setup(WE, negedge WCLK, 654); // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L828 - $setup(A0, negedge WCLK, 362); + $setup(A0, negedge WCLK &&& WE, 362); // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L826 - $setup(A1, negedge WCLK, 245); + $setup(A1, negedge WCLK &&& WE, 245); // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L824 - $setup(A2, negedge WCLK, 208); + $setup(A2, negedge WCLK &&& WE, 208); // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L822 - $setup(A3, negedge WCLK, 147); + $setup(A3, negedge WCLK &&& WE, 147); // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L820 - $setup(A4, negedge WCLK, 68); + $setup(A4, negedge WCLK &&& WE, 68); // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L818 - $setup(A5, negedge WCLK, 66); + $setup(A5, negedge WCLK &&& WE, 66); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L981 + if (WE) (negedge WCLK => ({SPO,DPO} : {D,1'bx})) = 1153; endspecify endmodule @@ -1579,8 +1572,6 @@ module RAM128X1D ( (* invertible_pin = "IS_WCLK_INVERTED" *) input WCLK, input WE, - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L818-830 - (* abc9_required="616 362 245 208 147 68 66" *) input [6:0] A, input [6:0] DPRA ); @@ -1591,46 +1582,47 @@ module RAM128X1D ( assign DPO = mem[DPRA]; wire clk = WCLK ^ IS_WCLK_INVERTED; always @(posedge clk) if (WE) mem[A] <= D; - generate - if (!IS_WCLK_INVERTED) - specify - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L981 - // plus 208ps to cross MUXF7 - if (WE) (posedge WCLK => (SPO : D)) = 1359; - if (WE) (posedge WCLK => (DPO : D)) = 1359; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L986 - $setup(D , posedge WCLK, 453); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L834 - $setup(WE, posedge WCLK, 654); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L818-830 - $setup(A[0], posedge WCLK, 616); - $setup(A[1], posedge WCLK, 362); - $setup(A[2], posedge WCLK, 245); - $setup(A[3], posedge WCLK, 208); - $setup(A[4], posedge WCLK, 147); - $setup(A[5], posedge WCLK, 68); - $setup(A[6], posedge WCLK, 66); - endspecify - else - specify - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L981 - // plus 208ps to cross MUXF7 - if (WE) (negedge WCLK => (SPO : D)) = 1359; - if (WE) (negedge WCLK => (DPO : D)) = 1359; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L986 - $setup(D , negedge WCLK, 453); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L834 - $setup(WE, negedge WCLK, 654); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L818-830 - $setup(A[0], negedge WCLK, 616); - $setup(A[1], negedge WCLK, 362); - $setup(A[2], negedge WCLK, 245); - $setup(A[3], negedge WCLK, 208); - $setup(A[4], negedge WCLK, 147); - $setup(A[5], negedge WCLK, 68); - $setup(A[6], negedge WCLK, 66); - endspecify - endgenerate + specify + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L986 + $setup(D , posedge WCLK &&& !IS_WCLK_INVERTED && WE, 453); + $setup(D , negedge WCLK &&& IS_WCLK_INVERTED && WE, 453); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L834 + $setup(WE, posedge WCLK &&& !IS_WCLK_INVERTED, 654); + $setup(WE, negedge WCLK &&& IS_WCLK_INVERTED, 654); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L818-830 + $setup(A[0], posedge WCLK &&& !IS_WCLK_INVERTED && WE, 616); + $setup(A[0], negedge WCLK &&& IS_WCLK_INVERTED && WE, 616); + $setup(A[1], posedge WCLK &&& !IS_WCLK_INVERTED && WE, 362); + $setup(A[1], negedge WCLK &&& IS_WCLK_INVERTED && WE, 362); + $setup(A[2], posedge WCLK &&& !IS_WCLK_INVERTED && WE, 245); + $setup(A[2], negedge WCLK &&& IS_WCLK_INVERTED && WE, 245); + $setup(A[3], posedge WCLK &&& !IS_WCLK_INVERTED && WE, 208); + $setup(A[3], negedge WCLK &&& IS_WCLK_INVERTED && WE, 208); + $setup(A[4], posedge WCLK &&& !IS_WCLK_INVERTED && WE, 147); + $setup(A[4], negedge WCLK &&& IS_WCLK_INVERTED && WE, 147); + $setup(A[5], posedge WCLK &&& !IS_WCLK_INVERTED && WE, 68); + $setup(A[5], negedge WCLK &&& IS_WCLK_INVERTED && WE, 68); + $setup(A[6], posedge WCLK &&& !IS_WCLK_INVERTED && WE, 66); + $setup(A[6], negedge WCLK &&& IS_WCLK_INVERTED && WE, 66); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L981 + if (!IS_WCLK_INVERTED && WE) (posedge WCLK => (SPO : D)) = 1153 + 217 /* to cross F7AMUX */ + 175 /* AMUX */; + if ( IS_WCLK_INVERTED && WE) (negedge WCLK => (DPO : 1'bx)) = 1153 + 223 /* to cross F7BMUX */ + 174 /* CMUX */; + // Captured by $__ABC9_RAM7 + //(A[0] => SPO) = 642 + 193 /* to cross F7AMUX */ + 175 /* AMUX */; + //(A[1] => SPO) = 631 + 193 /* to cross F7AMUX */ + 175 /* AMUX */; + //(A[2] => SPO) = 472 + 193 /* to cross F7AMUX */ + 175 /* AMUX */; + //(A[3] => SPO) = 407 + 193 /* to cross F7AMUX */ + 175 /* AMUX */; + //(A[4] => SPO) = 238 + 193 /* to cross F7AMUX */ + 175 /* AMUX */; + //(A[5] => SPO) = 127 + 193 /* to cross F7AMUX */ + 175 /* AMUX */; + //(A[6] => SPO) = 0 + 276 /* to select F7AMUX */ + 175 /* AMUX */; + //(DPRA[0] => DPO) = 642 + 223 /* to cross MUXF7 */ + 174 /* CMUX */; + //(DPRA[1] => DPO) = 631 + 223 /* to cross MUXF7 */ + 174 /* CMUX */; + //(DPRA[2] => DPO) = 472 + 223 /* to cross MUXF7 */ + 174 /* CMUX */; + //(DPRA[3] => DPO) = 407 + 223 /* to cross MUXF7 */ + 174 /* CMUX */; + //(DPRA[4] => DPO) = 238 + 223 /* to cross MUXF7 */ + 174 /* CMUX */; + //(DPRA[5] => DPO) = 127 + 223 /* to cross MUXF7 */ + 174 /* CMUX */; + //(DPRA[6] => DPO) = 0 + 296 /* to select MUXF7 */ + 174 /* CMUX */; + endspecify endmodule module RAM256X1D ( @@ -1690,87 +1682,72 @@ module RAM32M ( mem_c[2*ADDRD+:2] <= DIC; mem_d[2*ADDRD+:2] <= DID; end - generate - if (!IS_WCLK_INVERTED) - specify - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L889 - if (WE) (posedge WCLK => (DOA[0] : DIA[0])) = 1153; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L857 - if (WE) (posedge WCLK => (DOA[1] : DIA[1])) = 1188; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L957 - if (WE) (posedge WCLK => (DOB[0] : DIB[0])) = 1161; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L925 - if (WE) (posedge WCLK => (DOB[1] : DIB[1])) = 1187; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L993 - if (WE) (posedge WCLK => (DOC[0] : DIC[0])) = 1158; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L1025 - if (WE) (posedge WCLK => (DOC[1] : DIC[1])) = 1180; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L1093 - if (WE) (posedge WCLK => (DOD[0] : DID[0])) = 1163; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L1061 - if (WE) (posedge WCLK => (DOD[1] : DID[1])) = 1190; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L986 - $setup(ADDRD[0], posedge WCLK, 245); - $setup(ADDRD[1], posedge WCLK, 208); - $setup(ADDRD[2], posedge WCLK, 147); - $setup(ADDRD[3], posedge WCLK, 68); - $setup(ADDRD[4], posedge WCLK, 66); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L986-L988 - $setup(DIA[0], posedge WCLK, 453); - $setup(DIA[1], posedge WCLK, 384); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L1054-L1056 - $setup(DIB[0], posedge WCLK, 461); - $setup(DIB[1], posedge WCLK, 354); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L1122-L1124 - $setup(DIC[0], posedge WCLK, 457); - $setup(DIC[1], posedge WCLK, 375); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L1190-L1192 - $setup(DID[0], posedge WCLK, 310); - $setup(DID[1], posedge WCLK, 334); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L834 - $setup(WE, posedge WCLK, 654); - endspecify - else - specify - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L889 - if (WE) (negedge WCLK => (DOA[0] : DIA[0])) = 1153; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L857 - if (WE) (negedge WCLK => (DOA[1] : DIA[1])) = 1188; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L957 - if (WE) (negedge WCLK => (DOB[0] : DIB[0])) = 1161; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L925 - if (WE) (negedge WCLK => (DOB[1] : DIB[1])) = 1187; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L993 - if (WE) (negedge WCLK => (DOC[0] : DIC[0])) = 1158; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L1025 - if (WE) (negedge WCLK => (DOC[1] : DIC[1])) = 1180; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L1093 - if (WE) (negedge WCLK => (DOD[0] : DID[0])) = 1163; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L1061 - if (WE) (negedge WCLK => (DOD[1] : DID[1])) = 1190; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L986 - $setup(ADDRD[0], negedge WCLK, 245); - $setup(ADDRD[1], negedge WCLK, 208); - $setup(ADDRD[2], negedge WCLK, 147); - $setup(ADDRD[3], negedge WCLK, 68); - $setup(ADDRD[4], negedge WCLK, 66); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L986-L988 - $setup(DIA[0], negedge WCLK, 453); - $setup(DIA[1], negedge WCLK, 384); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L1054-L1056 - $setup(DIB[0], negedge WCLK, 461); - $setup(DIB[1], negedge WCLK, 354); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L1122-L1124 - $setup(DIC[0], negedge WCLK, 457); - $setup(DIC[1], negedge WCLK, 375); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L1190-L1192 - $setup(DID[0], negedge WCLK, 310); - $setup(DID[1], negedge WCLK, 334); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L834 - $setup(WE, posedge WCLK, 654); - endspecify - endgenerate - + specify + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L986 + $setup(ADDRD[0], posedge WCLK &&& !IS_WCLK_INVERTED && WE, 245); + $setup(ADDRD[0], negedge WCLK &&& IS_WCLK_INVERTED && WE, 245); + $setup(ADDRD[1], posedge WCLK &&& !IS_WCLK_INVERTED && WE, 208); + $setup(ADDRD[1], negedge WCLK &&& IS_WCLK_INVERTED && WE, 208); + $setup(ADDRD[2], posedge WCLK &&& !IS_WCLK_INVERTED && WE, 147); + $setup(ADDRD[2], negedge WCLK &&& IS_WCLK_INVERTED && WE, 147); + $setup(ADDRD[3], posedge WCLK &&& !IS_WCLK_INVERTED && WE, 68); + $setup(ADDRD[3], negedge WCLK &&& IS_WCLK_INVERTED && WE, 68); + $setup(ADDRD[4], posedge WCLK &&& !IS_WCLK_INVERTED && WE, 66); + $setup(ADDRD[4], negedge WCLK &&& IS_WCLK_INVERTED && WE, 66); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L986-L988 + $setup(DIA[0], posedge WCLK &&& !IS_WCLK_INVERTED && WE, 453); + $setup(DIA[0], negedge WCLK &&& IS_WCLK_INVERTED && WE, 453); + $setup(DIA[1], posedge WCLK &&& !IS_WCLK_INVERTED && WE, 384); + $setup(DIA[1], negedge WCLK &&& IS_WCLK_INVERTED && WE, 384); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L1054-L1056 + $setup(DIB[0], posedge WCLK &&& !IS_WCLK_INVERTED && WE, 461); + $setup(DIB[0], negedge WCLK &&& IS_WCLK_INVERTED && WE, 461); + $setup(DIB[1], posedge WCLK &&& !IS_WCLK_INVERTED && WE, 354); + $setup(DIB[1], negedge WCLK &&& IS_WCLK_INVERTED && WE, 354); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L1122-L1124 + $setup(DIC[0], posedge WCLK &&& !IS_WCLK_INVERTED && WE, 457); + $setup(DIC[0], negedge WCLK &&& IS_WCLK_INVERTED && WE, 457); + $setup(DIC[1], posedge WCLK &&& !IS_WCLK_INVERTED && WE, 375); + $setup(DIC[1], negedge WCLK &&& IS_WCLK_INVERTED && WE, 375); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L1190-L1192 + $setup(DID[0], posedge WCLK &&& !IS_WCLK_INVERTED && WE, 310); + $setup(DID[0], negedge WCLK &&& IS_WCLK_INVERTED && WE, 310); + $setup(DID[1], posedge WCLK &&& !IS_WCLK_INVERTED && WE, 334); + $setup(DID[1], negedge WCLK &&& IS_WCLK_INVERTED && WE, 334); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L834 + $setup(WE, posedge WCLK &&& !IS_WCLK_INVERTED, 654); + $setup(WE, negedge WCLK &&& IS_WCLK_INVERTED, 654); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L889 + if (!IS_WCLK_INVERTED && WE) (posedge WCLK => (DOA[0] : DIA[0])) = 1153; + if ( IS_WCLK_INVERTED && WE) (negedge WCLK => (DOA[0] : DIA[0])) = 1153; + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L857 + if (!IS_WCLK_INVERTED && WE) (posedge WCLK => (DOA[1] : DIA[1])) = 1188; + if ( IS_WCLK_INVERTED && WE) (negedge WCLK => (DOA[1] : DIA[1])) = 1188; + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L957 + if (!IS_WCLK_INVERTED && WE) (posedge WCLK => (DOB[0] : DIB[0])) = 1161; + if ( IS_WCLK_INVERTED && WE) (negedge WCLK => (DOB[0] : DIB[0])) = 1161; + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L925 + if (!IS_WCLK_INVERTED && WE) (posedge WCLK => (DOB[1] : DIB[1])) = 1187; + if ( IS_WCLK_INVERTED && WE) (negedge WCLK => (DOB[1] : DIB[1])) = 1187; + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L993 + if (!IS_WCLK_INVERTED && WE) (posedge WCLK => (DOC[0] : DIC[0])) = 1158; + if ( IS_WCLK_INVERTED && WE) (negedge WCLK => (DOC[0] : DIC[0])) = 1158; + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L1025 + if (!IS_WCLK_INVERTED && WE) (posedge WCLK => (DOC[1] : DIC[1])) = 1180; + if ( IS_WCLK_INVERTED && WE) (negedge WCLK => (DOC[1] : DIC[1])) = 1180; + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L1093 + if (!IS_WCLK_INVERTED && WE) (posedge WCLK => (DOD[0] : DID[0])) = 1163; + if ( IS_WCLK_INVERTED && WE) (negedge WCLK => (DOD[0] : DID[0])) = 1163; + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L1061 + if (!IS_WCLK_INVERTED && WE) (posedge WCLK => (DOD[1] : DID[1])) = 1190; + if ( IS_WCLK_INVERTED && WE) (negedge WCLK => (DOD[1] : DID[1])) = 1190; + // Captured by $__ABC9_RAM6 + //({{2{ADDRA[0]}},{2{ADDRB[0]}},{2{ADDRC[0]}},{2{ADDRD[0]}}} => {DOA,DOB,DOC,DOD}) = 642; + //({{2{ADDRA[1]}},{2{ADDRB[1]}},{2{ADDRC[1]}},{2{ADDRD[1]}}} => {DOA,DOB,DOC,DOD}) = 631; + //({{2{ADDRA[2]}},{2{ADDRB[2]}},{2{ADDRC[2]}},{2{ADDRD[2]}}} => {DOA,DOB,DOC,DOD}) = 472; + //({{2{ADDRA[3]}},{2{ADDRB[3]}},{2{ADDRC[3]}},{2{ADDRD[3]}}} => {DOA,DOB,DOC,DOD}) = 407; + //({{2{ADDRA[4]}},{2{ADDRB[4]}},{2{ADDRC[4]}},{2{ADDRD[4]}}} => {DOA,DOB,DOC,DOD}) = 238; + endspecify endmodule module RAM32M16 ( @@ -1879,64 +1856,54 @@ module RAM64M ( mem_c[ADDRD] <= DIC; mem_d[ADDRD] <= DID; end - generate - if (!IS_WCLK_INVERTED) - specify - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L889 - if (WE) (posedge WCLK => (DOA : DIA)) = 1153; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L957 - if (WE) (posedge WCLK => (DOB : DIB)) = 1161; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L1025 - if (WE) (posedge WCLK => (DOC : DIC)) = 1158; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L1093 - if (WE) (posedge WCLK => (DOD : DID)) = 1163; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L818-L830 - $setup(ADDRD[0], posedge WCLK, 362); - $setup(ADDRD[1], posedge WCLK, 245); - $setup(ADDRD[2], posedge WCLK, 208); - $setup(ADDRD[3], posedge WCLK, 147); - $setup(ADDRD[4], posedge WCLK, 68); - $setup(ADDRD[5], posedge WCLK, 66); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L986-L988 - $setup(DIA, posedge WCLK, 384); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L1054-L1056 - $setup(DIB, posedge WCLK, 354); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L1122-L1124 - $setup(DIC, posedge WCLK, 375); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L1190-L1192 - $setup(DID, posedge WCLK, 310); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L834 - $setup(WE, posedge WCLK, 654); - endspecify - else - specify - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L889 - if (WE) (negedge WCLK => (DOA : DIA)) = 1153; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L957 - if (WE) (negedge WCLK => (DOB : DIB)) = 1161; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L1025 - if (WE) (negedge WCLK => (DOC : DIC)) = 1158; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L1093 - if (WE) (negedge WCLK => (DOD : DID)) = 1163; - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L818-L830 - $setup(ADDRD[0], negedge WCLK, 362); - $setup(ADDRD[1], negedge WCLK, 245); - $setup(ADDRD[2], negedge WCLK, 208); - $setup(ADDRD[3], negedge WCLK, 147); - $setup(ADDRD[4], negedge WCLK, 68); - $setup(ADDRD[5], negedge WCLK, 66); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L986-L988 - $setup(DIA, negedge WCLK, 384); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L1054-L1056 - $setup(DIB, negedge WCLK, 354); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L1122-L1124 - $setup(DIC, negedge WCLK, 375); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L1190-L1192 - $setup(DID, negedge WCLK, 310); - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L834 - $setup(WE, negedge WCLK, 654); - endspecify - endgenerate + specify + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L818-L830 + $setup(ADDRD[0], posedge WCLK &&& !IS_WCLK_INVERTED && WE, 362); + $setup(ADDRD[0], negedge WCLK &&& IS_WCLK_INVERTED && WE, 362); + $setup(ADDRD[1], posedge WCLK &&& !IS_WCLK_INVERTED && WE, 245); + $setup(ADDRD[1], negedge WCLK &&& IS_WCLK_INVERTED && WE, 245); + $setup(ADDRD[2], posedge WCLK &&& !IS_WCLK_INVERTED && WE, 208); + $setup(ADDRD[2], negedge WCLK &&& IS_WCLK_INVERTED && WE, 208); + $setup(ADDRD[3], posedge WCLK &&& !IS_WCLK_INVERTED && WE, 147); + $setup(ADDRD[3], negedge WCLK &&& IS_WCLK_INVERTED && WE, 147); + $setup(ADDRD[4], posedge WCLK &&& !IS_WCLK_INVERTED && WE, 68); + $setup(ADDRD[4], negedge WCLK &&& IS_WCLK_INVERTED && WE, 68); + $setup(ADDRD[5], posedge WCLK &&& !IS_WCLK_INVERTED && WE, 66); + $setup(ADDRD[5], negedge WCLK &&& IS_WCLK_INVERTED && WE, 66); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L986-L988 + $setup(DIA, posedge WCLK &&& !IS_WCLK_INVERTED && WE, 384); + $setup(DIA, negedge WCLK &&& IS_WCLK_INVERTED && WE, 384); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L1054-L1056 + $setup(DIB, posedge WCLK &&& !IS_WCLK_INVERTED && WE, 354); + $setup(DIB, negedge WCLK &&& IS_WCLK_INVERTED && WE, 354); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L1122-L1124 + $setup(DIC, posedge WCLK &&& !IS_WCLK_INVERTED && WE, 375); + $setup(DIC, negedge WCLK &&& IS_WCLK_INVERTED && WE, 375); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L1190-L1192 + $setup(DID, posedge WCLK &&& !IS_WCLK_INVERTED && WE, 310); + $setup(DID, negedge WCLK &&& IS_WCLK_INVERTED && WE, 310); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L834 + $setup(WE, posedge WCLK &&& !IS_WCLK_INVERTED && WE, 654); + $setup(WE, negedge WCLK &&& IS_WCLK_INVERTED && WE, 654); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L889 + if (!IS_WCLK_INVERTED && WE) (posedge WCLK => (DOA : DIA)) = 1153; + if ( IS_WCLK_INVERTED && WE) (negedge WCLK => (DOA : DIA)) = 1153; + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L957 + if (!IS_WCLK_INVERTED && WE) (posedge WCLK => (DOB : DIB)) = 1161; + if ( IS_WCLK_INVERTED && WE) (negedge WCLK => (DOB : DIB)) = 1161; + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L1025 + if (!IS_WCLK_INVERTED && WE) (posedge WCLK => (DOC : DIC)) = 1158; + if ( IS_WCLK_INVERTED && WE) (negedge WCLK => (DOC : DIC)) = 1158; + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L1093 + if (!IS_WCLK_INVERTED && WE) (posedge WCLK => (DOD : DID)) = 1163; + if ( IS_WCLK_INVERTED && WE) (negedge WCLK => (DOD : DID)) = 1163; + // Captured by $__ABC9_RAM6 + //({ADDRA[0],ADDRB[0],ADDRC[0],ADDRD[0]} => {DOA,DOB,DOC,DOD}) = 642; + //({ADDRA[1],ADDRB[1],ADDRC[1],ADDRD[1]} => {DOA,DOB,DOC,DOD}) = 631; + //({ADDRA[2],ADDRB[2],ADDRC[2],ADDRD[2]} => {DOA,DOB,DOC,DOD}) = 472; + //({ADDRA[3],ADDRB[3],ADDRC[3],ADDRD[3]} => {DOA,DOB,DOC,DOD}) = 407; + //({ADDRA[4],ADDRB[4],ADDRC[4],ADDRD[4]} => {DOA,DOB,DOC,DOD}) = 238; + endspecify endmodule module RAM64M8 ( @@ -2064,11 +2031,21 @@ module SRL16 ( reg [15:0] r = INIT; assign Q = r[{A3,A2,A1,A0}]; always @(posedge CLK) r <= { r[14:0], D }; + + specify + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L905 + (posedge CLK => (Q : 1'bx)) = 1472; + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L912 + $setup(D , posedge CLK, 173); + // Captured by $__ABC9_RAM6 + //(A0 => Q) = 631; + //(A1 => Q) = 472; + //(A2 => Q) = 407; + //(A3 => Q) = 238; + endspecify endmodule module SRL16E ( - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L905 - (* abc9_arrival=1472 *) output Q, input A0, A1, A2, A3, CE, (* clkbuf_sink *) @@ -2088,6 +2065,19 @@ module SRL16E ( else always @(posedge CLK) if (CE) r <= { r[14:0], D }; endgenerate + specify + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L912 + $setup(D , posedge CLK &&& !IS_CLK_INVERTED, 173); + $setup(D , negedge CLK &&& IS_CLK_INVERTED, 173); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L905 + if (!IS_CLK_INVERTED && CE) (posedge CLK => (Q : 1'bx)) = 1472; + if ( IS_CLK_INVERTED && CE) (negedge CLK => (Q : 1'bx)) = 1472; + // Captured by $__ABC9_RAM6 + //(A0 => Q) = 631; + //(A1 => Q) = 472; + //(A2 => Q) = 407; + //(A3 => Q) = 238; + endspecify endmodule module SRLC16 ( @@ -2104,6 +2094,18 @@ module SRLC16 ( assign Q15 = r[15]; assign Q = r[{A3,A2,A1,A0}]; always @(posedge CLK) r <= { r[14:0], D }; + + specify + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L905 + (posedge CLK => (Q : 1'bx)) = 1472; + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L912 + $setup(D , posedge CLK, 173); + // Captured by $__ABC9_RAM6 + //(A0 => Q) = 631; + //(A1 => Q) = 472; + //(A2 => Q) = 407; + //(A3 => Q) = 238; + endspecify endmodule module SRLC16E ( @@ -2128,14 +2130,24 @@ module SRLC16E ( else always @(posedge CLK) if (CE) r <= { r[14:0], D }; endgenerate + specify + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L912 + $setup(D , posedge CLK &&& !IS_CLK_INVERTED, 173); + $setup(D , negedge CLK &&& IS_CLK_INVERTED, 173); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L905 + if (!IS_CLK_INVERTED && CE) (posedge CLK => (Q : D)) = 1472; + if ( IS_CLK_INVERTED && CE) (negedge CLK => (Q : D)) = 1472; + // Captured by $__ABC9_RAM6 + //(A0 => Q) = 642; + //(A1 => Q) = 631; + //(A2 => Q) = 472; + //(A3 => Q) = 407; + //(A4 => Q) = 238; + endspecify endmodule module SRLC32E ( - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L905 - (* abc9_arrival=1472 *) output Q, - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L904 - (* abc9_arrival=1114 *) output Q31, input [4:0] A, input CE, @@ -2157,6 +2169,23 @@ module SRLC32E ( else always @(posedge CLK) if (CE) r <= { r[30:0], D }; endgenerate + specify + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L912 + $setup(D , posedge CLK &&& !IS_CLK_INVERTED, 173); + $setup(D , negedge CLK &&& IS_CLK_INVERTED, 173); + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L905 + if (!IS_CLK_INVERTED && CE) (posedge CLK => (Q : 1'bx)) = 1472; + if ( IS_CLK_INVERTED && CE) (negedge CLK => (Q : 1'bx)) = 1472; + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L904 + if (!IS_CLK_INVERTED && CE) (posedge CLK => (Q : 1'bx)) = 1114; + if ( IS_CLK_INVERTED && CE) (negedge CLK => (Q : 1'bx)) = 1114; + // Captured by $__ABC9_RAM6 + //(A0 => Q) = 642; + //(A1 => Q) = 631; + //(A2 => Q) = 472; + //(A3 => Q) = 407; + //(A4 => Q) = 238; + endspecify endmodule module CFGLUT5 ( @@ -2928,31 +2957,16 @@ module DSP48E1 ( output reg [3:0] CARRYOUT, output reg MULTSIGNOUT, output OVERFLOW, -`ifdef YOSYS - (* abc9_arrival = \P.abc9_arrival () *) -`endif output reg signed [47:0] P, output reg PATTERNBDETECT, output reg PATTERNDETECT, -`ifdef YOSYS - (* abc9_arrival = \PCOUT.abc9_arrival () *) -`endif output [47:0] PCOUT, output UNDERFLOW, -`ifdef YOSYS - (* abc9_required = \A.abc9_required () *) -`endif input signed [29:0] A, input [29:0] ACIN, input [3:0] ALUMODE, -`ifdef YOSYS - (* abc9_required = \B.abc9_required () *) -`endif input signed [17:0] B, input [17:0] BCIN, -`ifdef YOSYS - (* abc9_required = \C.abc9_required () *) -`endif input [47:0] C, input CARRYCASCIN, input CARRYIN, @@ -2971,16 +2985,10 @@ module DSP48E1 ( input CEM, input CEP, (* clkbuf_sink *) input CLK, -`ifdef YOSYS - (* abc9_required = \D.abc9_required () *) -`endif input [24:0] D, input [4:0] INMODE, input MULTSIGNIN, input [6:0] OPMODE, -`ifdef YOSYS - (* abc9_required = \PCIN.abc9_required () *) -`endif input [47:0] PCIN, input RSTA, input RSTALLCARRYIN, @@ -3157,6 +3165,23 @@ module DSP48E1 ( // $error("Invalid DSP48E1 configuration"); end endfunction + + specify + $setup(A , posedge CLK &&& !IS_CLK_INVERTED, \A.abc9_required () ); + $setup(A , negedge CLK &&& IS_CLK_INVERTED, \A.abc9_required () ); + $setup(B , posedge CLK &&& !IS_CLK_INVERTED, \B.abc9_required () ); + $setup(B , negedge CLK &&& IS_CLK_INVERTED, \B.abc9_required () ); + $setup(C , posedge CLK &&& !IS_CLK_INVERTED, \C.abc9_required () ); + $setup(C , negedge CLK &&& IS_CLK_INVERTED, \C.abc9_required () ); + $setup(D , posedge CLK &&& !IS_CLK_INVERTED, \D.abc9_required () ); + $setup(D , negedge CLK &&& IS_CLK_INVERTED, \D.abc9_required () ); + $setup(PCIN, posedge CLK &&& !IS_CLK_INVERTED, \PCIN.abc9_required () ); + $setup(PCIN, negedge CLK &&& IS_CLK_INVERTED, \PCIN.abc9_required () ); + if (!IS_CLK_INVERTED && CEP) (posedge CLK => (P : 48'bx)) = \P.abc9_arrival () ; + if ( IS_CLK_INVERTED && CEP) (negedge CLK => (P : 48'bx)) = \P.abc9_arrival () ; + if (!IS_CLK_INVERTED && CEP) (posedge CLK => (PCOUT : 48'bx)) = \PCOUT.abc9_arrival () ; + if ( IS_CLK_INVERTED && CEP) (negedge CLK => (PCOUT : 48'bx)) = \PCOUT.abc9_arrival () ; + endspecify `endif initial begin |