Replace opt_rmdff with opt_dff.

8 files changed, 31 insertions, 34 deletions

diff --git a/tests/arch/anlogic/dffs.ys b/tests/arch/anlogic/dffs.ys
index d3281ab89..deb90e051 100644
--- a/tests/arch/anlogic/dffs.ys
+++ b/tests/arch/anlogic/dffs.ys
@@ -15,6 +15,5 @@ proc
 equiv_opt -assert -map +/anlogic/cells_sim.v synth_anlogic # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd dffe # Constrain all select calls below inside the top module
-select -assert-count 1 t:AL_MAP_LUT3
 select -assert-count 1 t:AL_MAP_SEQ
-select -assert-none t:AL_MAP_LUT3 t:AL_MAP_SEQ %% t:* %D
+select -assert-none t:AL_MAP_SEQ %% t:* %D
diff --git a/tests/arch/ecp5/fsm.ys b/tests/arch/ecp5/fsm.ys
index ba91e5fc0..a77986bbc 100644
--- a/tests/arch/ecp5/fsm.ys
+++ b/tests/arch/ecp5/fsm.ys
@@ -10,8 +10,8 @@ sat -verify -prove-asserts -show-public -set-at 1 in_reset 1 -seq 20 -prove-skip
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd fsm # Constrain all select calls below inside the top module
 
-select -assert-count 1 t:L6MUX21
-select -assert-count 15 t:LUT4
-select -assert-count 6 t:PFUMX
+select -assert-max 1 t:L6MUX21
+select -assert-max 16 t:LUT4
+select -assert-max 7 t:PFUMX
 select -assert-count 6 t:TRELLIS_FF
 select -assert-none t:L6MUX21 t:LUT4 t:PFUMX t:TRELLIS_FF %% t:* %D
diff --git a/tests/arch/efinix/adffs.ys b/tests/arch/efinix/adffs.ys
index 49dc7f256..86d446439 100644
--- a/tests/arch/efinix/adffs.ys
+++ b/tests/arch/efinix/adffs.ys
@@ -32,9 +32,8 @@ design -load postopt # load the post-opt design (otherwise equiv_opt loads the p
 cd dffs # Constrain all select calls below inside the top module
 select -assert-count 1 t:EFX_FF
 select -assert-count 1 t:EFX_GBUFCE
-select -assert-count 1 t:EFX_LUT4
 
-select -assert-none t:EFX_FF t:EFX_GBUFCE t:EFX_LUT4 %% t:* %D
+select -assert-none t:EFX_FF t:EFX_GBUFCE %% t:* %D
 
 
 design -load read
@@ -45,6 +44,5 @@ design -load postopt # load the post-opt design (otherwise equiv_opt loads the p
 cd ndffnr # Constrain all select calls below inside the top module
 select -assert-count 1 t:EFX_FF
 select -assert-count 1 t:EFX_GBUFCE
-select -assert-count 1 t:EFX_LUT4
 
-select -assert-none t:EFX_FF t:EFX_GBUFCE t:EFX_LUT4 %% t:* %D
+select -assert-none t:EFX_FF t:EFX_GBUFCE %% t:* %D
diff --git a/tests/arch/efinix/dffs.ys b/tests/arch/efinix/dffs.ys
index af787ab67..f9111873c 100644
--- a/tests/arch/efinix/dffs.ys
+++ b/tests/arch/efinix/dffs.ys
@@ -19,6 +19,5 @@ design -load postopt # load the post-opt design (otherwise equiv_opt loads the p
 cd dffe # Constrain all select calls below inside the top module
 select -assert-count 1 t:EFX_FF
 select -assert-count 1 t:EFX_GBUFCE
-select -assert-count 1 t:EFX_LUT4
 
-select -assert-none t:EFX_FF t:EFX_GBUFCE t:EFX_LUT4 %% t:* %D
+select -assert-none t:EFX_FF t:EFX_GBUFCE %% t:* %D
diff --git a/tests/arch/gowin/init.ys b/tests/arch/gowin/init.ys
index 88e88c15a..fba7c2fa5 100644
--- a/tests/arch/gowin/init.ys
+++ b/tests/arch/gowin/init.ys
@@ -45,24 +45,25 @@ flatten
 synth_gowin -run coarse:
 
 # check the flops mapped as expected
-select -assert-count 1 t:DFF
+select -assert-count 2 t:DFF
 select -assert-count 1 t:DFFC
 select -assert-count 1 t:DFFCE
-select -assert-count 1 t:DFFE
-select -assert-count 1 t:DFFN
+select -assert-count 0 t:DFFE
+select -assert-count 2 t:DFFN
 select -assert-count 1 t:DFFNC
 select -assert-count 1 t:DFFNCE
-select -assert-count 1 t:DFFNE
+select -assert-count 0 t:DFFNE
 select -assert-count 1 t:DFFNP
 select -assert-count 1 t:DFFNPE
 select -assert-count 0 t:DFFNR
 select -assert-count 0 t:DFFNRE
-select -assert-count 2 t:DFFNS
-select -assert-count 2 t:DFFNSE
+select -assert-count 3 t:DFFNS
+select -assert-count 1 t:DFFNSE
 select -assert-count 1 t:DFFP
 select -assert-count 1 t:DFFPE
 select -assert-count 0 t:DFFR
 select -assert-count 0 t:DFFRE
-select -assert-count 2 t:DFFS
-select -assert-count 2 t:DFFSE
-select -assert-count 12 t:LUT2
+select -assert-count 3 t:DFFS
+select -assert-count 1 t:DFFSE
+select -assert-count 4 t:LUT2
+select -assert-count 4 t:LUT4
diff --git a/tests/arch/intel_alm/adffs.ys b/tests/arch/intel_alm/adffs.ys
index 04fa2ad24..4565dcc64 100644
--- a/tests/arch/intel_alm/adffs.ys
+++ b/tests/arch/intel_alm/adffs.ys
@@ -77,10 +77,9 @@ equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd ndffnr # Constrain all select calls below inside the top module
 select -assert-count 1 t:MISTRAL_FF
-select -assert-count 1 t:MISTRAL_NOT
-select -assert-count 1 t:MISTRAL_ALUT2
+select -assert-count 2 t:MISTRAL_NOT
 
-select -assert-none t:MISTRAL_FF t:MISTRAL_NOT t:MISTRAL_ALUT2 %% t:* %D
+select -assert-none t:MISTRAL_FF t:MISTRAL_NOT %% t:* %D
 
 
 design -load read
@@ -90,7 +89,6 @@ equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd ndffnr # Constrain all select calls below inside the top module
 select -assert-count 1 t:MISTRAL_FF
-select -assert-count 1 t:MISTRAL_NOT
-select -assert-count 1 t:MISTRAL_ALUT2
+select -assert-count 2 t:MISTRAL_NOT
 
-select -assert-none t:MISTRAL_FF t:MISTRAL_NOT t:MISTRAL_ALUT2 %% t:* %D
+select -assert-none t:MISTRAL_FF t:MISTRAL_NOT %% t:* %D
diff --git a/tests/arch/intel_alm/fsm.ys b/tests/arch/intel_alm/fsm.ys
index 6491b2e08..e54b5c21e 100644
--- a/tests/arch/intel_alm/fsm.ys
+++ b/tests/arch/intel_alm/fsm.ys
@@ -12,12 +12,13 @@ design -load postopt # load the post-opt design (otherwise equiv_opt loads the p
 cd fsm # Constrain all select calls below inside the top module
 
 select -assert-count 6 t:MISTRAL_FF
+select -assert-max 1 t:MISTRAL_NOT
 select -assert-max 2 t:MISTRAL_ALUT2 # Clang returns 2, GCC returns 1
-select -assert-count 1 t:MISTRAL_ALUT3
-select -assert-max 1 t:MISTRAL_ALUT4 # Clang returns 0, GCC returns 1
+select -assert-max 1 t:MISTRAL_ALUT3
+select -assert-max 2 t:MISTRAL_ALUT4 # Clang returns 0, GCC returns 1
 select -assert-max 6 t:MISTRAL_ALUT5 # Clang returns 5, GCC returns 4
 select -assert-max 2 t:MISTRAL_ALUT6 # Clang returns 1, GCC returns 2
-select -assert-none t:MISTRAL_FF t:MISTRAL_ALUT2 t:MISTRAL_ALUT3 t:MISTRAL_ALUT4 t:MISTRAL_ALUT5 t:MISTRAL_ALUT6 %% t:* %D
+select -assert-none t:MISTRAL_FF t:MISTRAL_NOT t:MISTRAL_ALUT2 t:MISTRAL_ALUT3 t:MISTRAL_ALUT4 t:MISTRAL_ALUT5 t:MISTRAL_ALUT6 %% t:* %D
 
 design -reset
 read_verilog ../common/fsm.v
@@ -34,9 +35,10 @@ design -load postopt # load the post-opt design (otherwise equiv_opt loads the p
 cd fsm # Constrain all select calls below inside the top module
 
 select -assert-count 6 t:MISTRAL_FF
+select -assert-max 1 t:MISTRAL_NOT
 select -assert-max 2 t:MISTRAL_ALUT2 # Clang returns 2, GCC returns 1
 select -assert-max 2 t:MISTRAL_ALUT3 # Clang returns 2, GCC returns 1
-select -assert-max 1 t:MISTRAL_ALUT4 # Clang returns 0, GCC returns 1
+select -assert-max 2 t:MISTRAL_ALUT4 # Clang returns 0, GCC returns 1
 select -assert-max 6 t:MISTRAL_ALUT5 # Clang returns 5, GCC returns 4
 select -assert-max 2 t:MISTRAL_ALUT6 # Clang returns 1, GCC returns 2
-select -assert-none t:MISTRAL_FF t:MISTRAL_ALUT2 t:MISTRAL_ALUT3 t:MISTRAL_ALUT4 t:MISTRAL_ALUT5 t:MISTRAL_ALUT6 %% t:* %D
+select -assert-none t:MISTRAL_FF t:MISTRAL_NOT t:MISTRAL_ALUT2 t:MISTRAL_ALUT3 t:MISTRAL_ALUT4 t:MISTRAL_ALUT5 t:MISTRAL_ALUT6 %% t:* %D
diff --git a/tests/tools/autotest.sh b/tests/tools/autotest.sh
index 4d3478628..72a3d51eb 100755
--- a/tests/tools/autotest.sh
+++ b/tests/tools/autotest.sh
@@ -193,13 +193,13 @@ do
 		elif [ "$frontend" = "verific_gates" ]; then
 			test_passes -p "verific -vlog2k ${bn}_ref.${refext}; verific -import -gates -all; opt; memory;;"
 		else
-			test_passes -f "$frontend $include_opts" -p "hierarchy; proc; opt; memory; opt; fsm; opt -full -fine" ${bn}_ref.${refext}
+			test_passes -f "$frontend $include_opts" -p "hierarchy; proc; opt -nodffe -nosdff; fsm; opt; memory; opt -full -fine" ${bn}_ref.${refext}
 			test_passes -f "$frontend $include_opts" -p "hierarchy; synth -run coarse; techmap; opt; abc -dff" ${bn}_ref.${refext}
 			if [ -n "$firrtl2verilog" ]; then
 			    if test -z "$xfirrtl" || ! grep "$fn" "$xfirrtl" ; then
-				"$toolsdir"/../../yosys -b "firrtl" -o ${bn}_ref.fir -f "$frontend $include_opts" -p "prep -nordff; proc; opt; memory; opt; fsm; opt -full -fine; pmuxtree" ${bn}_ref.${refext}
+				"$toolsdir"/../../yosys -b "firrtl" -o ${bn}_ref.fir -f "$frontend $include_opts" -p "prep -nordff; proc; opt -nodffe -nosdff; fsm; opt; memory; opt -full -fine; pmuxtree" ${bn}_ref.${refext}
 				$firrtl2verilog -i ${bn}_ref.fir -o ${bn}_ref.fir.v
-				test_passes -f "$frontend $include_opts" -p "hierarchy; proc; opt; memory; opt; fsm; opt -full -fine" ${bn}_ref.fir.v
+				test_passes -f "$frontend $include_opts" -p "hierarchy; proc; opt -nodffe -nosdff; fsm; opt; memory; opt -full -fine" ${bn}_ref.fir.v
 			    fi
 			fi
 		fi