xilinx: Initial support for LUT4 devices.

Adds support for mapping logic, including LUTs, wide LUTs, and carry
chains.

Fixes #1547

3 files changed, 83 insertions, 1 deletions

diff --git a/tests/arch/xilinx/add_sub.ys b/tests/arch/xilinx/add_sub.ys
index 70cfe81a3..6be9a73a3 100644
--- a/tests/arch/xilinx/add_sub.ys
+++ b/tests/arch/xilinx/add_sub.ys
@@ -1,11 +1,23 @@
 read_verilog ../common/add_sub.v
 hierarchy -top top
 proc
+design -save orig
+
 equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd top # Constrain all select calls below inside the top module
 stat
-select -assert-count 16 t:LUT2
+select -assert-count 8 t:LUT2
 select -assert-count 2 t:CARRY4
 select -assert-none t:LUT2 t:CARRY4 %% t:* %D
 
+design -load orig
+
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx -family xc3s -noiopad # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+stat
+select -assert-count 8 t:LUT2
+select -assert-count 6 t:MUXCY
+select -assert-count 8 t:XORCY
+select -assert-none t:LUT2 t:MUXCY t:XORCY %% t:* %D
diff --git a/tests/arch/xilinx/fsm.ys b/tests/arch/xilinx/fsm.ys
index a464fcfdb..fec4c6082 100644
--- a/tests/arch/xilinx/fsm.ys
+++ b/tests/arch/xilinx/fsm.ys
@@ -3,6 +3,8 @@ hierarchy -top fsm
 proc
 flatten
 
+design -save orig
+
 equiv_opt -run :prove -map +/xilinx/cells_sim.v synth_xilinx -noiopad
 miter -equiv -make_assert -flatten gold gate miter
 sat -verify -prove-asserts -show-public -set-at 1 in_reset 1 -seq 20 -prove-skip 1 miter
@@ -17,3 +19,20 @@ select -assert-count 1 t:LUT2
 select -assert-count 3 t:LUT5
 select -assert-count 1 t:LUT6
 select -assert-none t:BUFG t:FDRE t:FDSE t:LUT2 t:LUT5 t:LUT6 %% t:* %D
+
+design -load orig
+
+equiv_opt -run :prove -map +/xilinx/cells_sim.v synth_xilinx -family xc3se -noiopad
+miter -equiv -make_assert -flatten gold gate miter
+sat -verify -prove-asserts -show-public -set-at 1 in_reset 1 -seq 20 -prove-skip 1 miter
+
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd fsm # Constrain all select calls below inside the top module
+stat
+select -assert-count 1 t:BUFG
+select -assert-count 6 t:FDRE
+select -assert-count 1 t:LUT1
+select -assert-count 3 t:LUT3
+select -assert-count 6 t:LUT4
+select -assert-count 6 t:MUXF5
+select -assert-none t:BUFG t:FDRE t:LUT1 t:LUT3 t:LUT4 t:MUXF5 %% t:* %D
diff --git a/tests/arch/xilinx/mux_lut4.ys b/tests/arch/xilinx/mux_lut4.ys
new file mode 100644
index 000000000..3e3256993
--- /dev/null
+++ b/tests/arch/xilinx/mux_lut4.ys
@@ -0,0 +1,51 @@
+read_verilog ../common/mux.v
+design -save read
+
+hierarchy -top mux2
+proc
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx -family xc3se -noiopad # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mux2 # Constrain all select calls below inside the top module
+select -assert-count 1 t:LUT3
+
+select -assert-none t:LUT3 %% t:* %D
+
+
+design -load read
+hierarchy -top mux4
+proc
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx -family xc3se -noiopad # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mux4 # Constrain all select calls below inside the top module
+select -assert-count 4 t:LUT1
+select -assert-count 2 t:MUXF5
+select -assert-count 1 t:MUXF6
+
+select -assert-none t:LUT1 t:MUXF5 t:MUXF6 %% t:* %D
+
+
+design -load read
+hierarchy -top mux8
+proc
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx -family xc3se -noiopad # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mux8 # Constrain all select calls below inside the top module
+select -assert-count 4 t:LUT1
+select -assert-count 3 t:LUT4
+select -assert-count 2 t:MUXF5
+select -assert-count 1 t:MUXF6
+
+select -assert-none t:LUT1 t:LUT4 t:MUXF5 t:MUXF6 %% t:* %D
+
+
+design -load read
+hierarchy -top mux16
+proc
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx -family xc3se -noiopad # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mux16 # Constrain all select calls below inside the top module
+select -assert-max 32 t:LUT*
+select -assert-max 8 t:MUXF6
+select -assert-max 4 t:MUXF7
+
+select -assert-none t:LUT* t:MUXF5 t:MUXF6 t:MUXF7 %% t:* %D