Changes required for VPR place and route synth_xilinx.

Signed-off-by: Keith Rothman <537074+litghost@users.noreply.github.com>

1 files changed, 70 insertions, 33 deletions

diff --git a/techlibs/xilinx/cells_sim.v b/techlibs/xilinx/cells_sim.v
index eba17ac9c..787b37cc8 100644
--- a/techlibs/xilinx/cells_sim.v
+++ b/techlibs/xilinx/cells_sim.v
@@ -1,3 +1,21 @@
+/*
+ *  yosys -- Yosys Open SYnthesis Suite
+ *
+ *  Copyright (C) 2012  Clifford Wolf <clifford@clifford.at>
+ *
+ *  Permission to use, copy, modify, and/or distribute this software for any
+ *  purpose with or without fee is hereby granted, provided that the above
+ *  copyright notice and this permission notice appear in all copies.
+ *
+ *  THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ *  WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ *  ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ *  WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ *  ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ *  OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
 
 // See Xilinx UG953 and UG474 for a description of the cell types below.
 // http://www.xilinx.com/support/documentation/user_guides/ug474_7Series_CLB.pdf
@@ -104,56 +122,75 @@ module CARRY4(output [3:0] CO, O, input CI, CYINIT, input [3:0] DI, S);
   assign CO[3] = S[3] ? CO[2] : DI[3];
 endmodule
 
+`ifdef _EXPLICIT_CARRY
+
+module CARRY0(output CO_CHAIN, CO_FABRIC, O, input CI, CI_INIT, DI, S);
+  parameter CYINIT_FABRIC = 0;
+  wire CI_COMBINE;
+  if(CYINIT_FABRIC) begin
+    assign CI_COMBINE = CI_INIT;
+  end else begin
+    assign CI_COMBINE = CI;
+  end
+  assign CO_CHAIN = S ? CI_COMBINE : DI;
+  assign CO_FABRIC = S ? CI_COMBINE : DI;
+  assign O = S ^ CI_COMBINE;
+endmodule
+
+module CARRY(output CO_CHAIN, CO_FABRIC, O, input CI, DI, S);
+  assign CO_CHAIN = S ? CI : DI;
+  assign CO_FABRIC = S ? CI : DI;
+  assign O = S ^ CI;
+endmodule
+
+`endif
+
 module FDRE (output reg Q, input C, CE, D, R);
   parameter [0:0] INIT = 1'b0;
-  parameter [0:0] IS_C_INVERTED = 1'b0;
-  parameter [0:0] IS_D_INVERTED = 1'b0;
-  parameter [0:0] IS_R_INVERTED = 1'b0;
   initial Q <= INIT;
-  generate case (|IS_C_INVERTED)
-    1'b0: always @(posedge C) if (R == !IS_R_INVERTED) Q <= 1'b0; else if (CE) Q <= D ^ IS_D_INVERTED;
-    1'b1: always @(negedge C) if (R == !IS_R_INVERTED) Q <= 1'b0; else if (CE) Q <= D ^ IS_D_INVERTED;
-  endcase endgenerate
+  always @(posedge C) if (R) Q <= 1'b0; else if(CE) Q <= D;
 endmodule
 
 module FDSE (output reg Q, input C, CE, D, S);
-  parameter [0:0] INIT = 1'b0;
-  parameter [0:0] IS_C_INVERTED = 1'b0;
-  parameter [0:0] IS_D_INVERTED = 1'b0;
-  parameter [0:0] IS_S_INVERTED = 1'b0;
+  parameter [0:0] INIT = 1'b1;
   initial Q <= INIT;
-  generate case (|IS_C_INVERTED)
-    1'b0: always @(posedge C) if (S == !IS_S_INVERTED) Q <= 1'b1; else if (CE) Q <= D ^ IS_D_INVERTED;
-    1'b1: always @(negedge C) if (S == !IS_S_INVERTED) Q <= 1'b1; else if (CE) Q <= D ^ IS_D_INVERTED;
-  endcase endgenerate
+  always @(posedge C) if (S) Q <= 1'b1; else if(CE) Q <= D;
 endmodule
 
 module FDCE (output reg Q, input C, CE, D, CLR);
   parameter [0:0] INIT = 1'b0;
-  parameter [0:0] IS_C_INVERTED = 1'b0;
-  parameter [0:0] IS_D_INVERTED = 1'b0;
-  parameter [0:0] IS_CLR_INVERTED = 1'b0;
   initial Q <= INIT;
-  generate case ({|IS_C_INVERTED, |IS_CLR_INVERTED})
-    2'b00: always @(posedge C, posedge CLR) if ( CLR) Q <= 1'b0; else if (CE) Q <= D ^ IS_D_INVERTED;
-    2'b01: always @(posedge C, negedge CLR) if (!CLR) Q <= 1'b0; else if (CE) Q <= D ^ IS_D_INVERTED;
-    2'b10: always @(negedge C, posedge CLR) if ( CLR) Q <= 1'b0; else if (CE) Q <= D ^ IS_D_INVERTED;
-    2'b11: always @(negedge C, negedge CLR) if (!CLR) Q <= 1'b0; else if (CE) Q <= D ^ IS_D_INVERTED;
-  endcase endgenerate
+  always @(posedge C, posedge CLR) if (CLR) Q <= 1'b0; else if (CE) Q <= D;
 endmodule
 
 module FDPE (output reg Q, input C, CE, D, PRE);
+  parameter [0:0] INIT = 1'b1;
+  initial Q <= INIT;
+  always @(negedge C, posedge PRE) if (PRE) Q <= 1'b1; else if (CE) Q <= D;
+endmodule
+
+module FDRE_1 (output reg Q, input C, CE, D, R);
   parameter [0:0] INIT = 1'b0;
-  parameter [0:0] IS_C_INVERTED = 1'b0;
-  parameter [0:0] IS_D_INVERTED = 1'b0;
-  parameter [0:0] IS_PRE_INVERTED = 1'b0;
   initial Q <= INIT;
-  generate case ({|IS_C_INVERTED, |IS_PRE_INVERTED})
-    2'b00: always @(posedge C, posedge PRE) if ( PRE) Q <= 1'b1; else if (CE) Q <= D ^ IS_D_INVERTED;
-    2'b01: always @(posedge C, negedge PRE) if (!PRE) Q <= 1'b1; else if (CE) Q <= D ^ IS_D_INVERTED;
-    2'b10: always @(negedge C, posedge PRE) if ( PRE) Q <= 1'b1; else if (CE) Q <= D ^ IS_D_INVERTED;
-    2'b11: always @(negedge C, negedge PRE) if (!PRE) Q <= 1'b1; else if (CE) Q <= D ^ IS_D_INVERTED;
-  endcase endgenerate
+  always @(negedge C) if (R) Q <= 1'b0; else if(CE) Q <= D;
+endmodule
+
+module FDSE_1 (output reg Q, input C, CE, D, S);
+  parameter [0:0] INIT = 1'b1;
+  initial Q <= INIT;
+  always @(negedge C) if (S) Q <= 1'b1; else if(CE) Q <= D;
+endmodule
+
+module FDCE_1 (output reg Q, input C, CE, D, CLR);
+  parameter [0:0] INIT = 1'b0;
+  initial Q <= INIT;
+  always @(negedge C, posedge CLR) if (CLR) Q <= 1'b0; else if (CE) Q <= D;
+endmodule
+
+module FDPE_1 (output reg Q, input C, CE, D, PRE);
+  parameter [0:0] INIT = 1'b1;
+  initial Q <= INIT;
+  always @(negedge C, posedge PRE) if (PRE) Q <= 1'b1; else if (CE) Q <= D;
 endmodule
 
 module RAM64X1D (