Adding Cyclone IV (E, GX), Arria 10, Cyclone V and LPM functions (ALTPLL and M9K); M9K is not finished yet. Achronix Speedster also in this commit. Both Arria10 and Speedster-i are still experimental due complexity, but you can experiment around those devices right now

3 files changed, 280 insertions, 0 deletions

diff --git a/techlibs/achronix/speedster22i/cells_arith_speedster.v b/techlibs/achronix/speedster22i/cells_arith_speedster.v
new file mode 100755
index 000000000..9ef073f7c
--- /dev/null
+++ b/techlibs/achronix/speedster22i/cells_arith_speedster.v
@@ -0,0 +1,65 @@
+/*
+ *  yosys -- Yosys Open SYnthesis Suite
+ *
+ *  Copyright (C) 2012  Clifford Wolf <clifford@clifford.at>
+ *
+ *  Permission to use, copy, modify, and/or distribute this software for any
+ *  purpose with or without fee is hereby granted, provided that the above
+ *  copyright notice and this permission notice appear in all copies.
+ *
+ *  THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ *  WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ *  ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ *  WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ *  ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ *  OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+// NOTE: This is still WIP.
+(* techmap_celltype = "$alu" *)
+module _80_altera_max10_alu (A, B, CI, BI, X, Y, CO);
+   parameter A_SIGNED = 0;
+   parameter B_SIGNED = 0;
+   parameter A_WIDTH  = 1;
+   parameter B_WIDTH  = 1;
+   parameter Y_WIDTH  = 1;
+
+	input [A_WIDTH-1:0] A;
+	input [B_WIDTH-1:0] B;
+	output [Y_WIDTH-1:0] X, Y;
+
+	input CI, BI;
+	//output [Y_WIDTH-1:0] CO;
+        output                 CO;
+
+	wire _TECHMAP_FAIL_ = Y_WIDTH <= 4;
+
+	wire [Y_WIDTH-1:0] A_buf, B_buf;
+	\$pos #(.A_SIGNED(A_SIGNED), .A_WIDTH(A_WIDTH), .Y_WIDTH(Y_WIDTH)) A_conv (.A(A), .Y(A_buf));
+	\$pos #(.A_SIGNED(B_SIGNED), .A_WIDTH(B_WIDTH), .Y_WIDTH(Y_WIDTH)) B_conv (.A(B), .Y(B_buf));
+
+	wire [Y_WIDTH-1:0] AA = A_buf;
+	wire [Y_WIDTH-1:0] BB = BI ? ~B_buf : B_buf;
+	//wire [Y_WIDTH:0] C = {CO, CI};
+        wire [Y_WIDTH+1:0] COx;
+        wire [Y_WIDTH+1:0] C = {COx, CI};
+    
+	/* Start implementation */
+	(* keep *) fiftyfivenm_lcell_comb #(.lut_mask(16'b0000_0000_1010_1010), .sum_lutc_input("cin")) carry_start (.cout(COx[0]), .dataa(C[0]), .datab(1'b1), .datac(1'b1), .datad(1'b1));
+	
+	genvar i;
+	generate for (i = 0; i < Y_WIDTH; i = i + 1) begin: slice
+	  if(i==Y_WIDTH-1) begin
+	    (* keep *) fiftyfivenm_lcell_comb #(.lut_mask(16'b1111_0000_1110_0000), .sum_lutc_input("cin")) carry_end (.combout(COx[Y_WIDTH]), .dataa(1'b1), .datab(1'b1), .datac(1'b1), .datad(1'b1), .cin(C[Y_WIDTH]));
+            assign CO = COx[Y_WIDTH];
+          end
+	  else
+	    fiftyfivenm_lcell_comb #(.lut_mask(16'b1001_0110_1110_1000), .sum_lutc_input("cin")) arith_cell (.combout(Y[i]), .cout(COx[i+1]), .dataa(AA[i]), .datab(BB[i]), .datac(1'b1), .datad(1'b1), .cin(C[i+1]));
+	  end: slice
+	endgenerate
+	/* End implementation */
+	assign X = AA ^ BB;
+   
+endmodule  
diff --git a/techlibs/achronix/speedster22i/cells_comb_speedster.v b/techlibs/achronix/speedster22i/cells_comb_speedster.v
new file mode 100755
index 000000000..24c57c41a
--- /dev/null
+++ b/techlibs/achronix/speedster22i/cells_comb_speedster.v
@@ -0,0 +1,127 @@
+/*
+ *  yosys -- Yosys Open SYnthesis Suite
+ *
+ *  Copyright (C) 2012  Clifford Wolf <clifford@clifford.at>
+ *
+ *  Permission to use, copy, modify, and/or distribute this software for any
+ *  purpose with or without fee is hereby granted, provided that the above
+ *  copyright notice and this permission notice appear in all copies.
+ *
+ *  THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ *  WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ *  ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ *  WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ *  ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ *  OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+module VCC (output V);
+   assign V = 1'b1;
+endmodule // VCC
+
+module GND (output G);
+   assign G = 1'b0;
+endmodule // GND
+
+/* Altera MAX10 devices Input Buffer Primitive */
+module PADIN (output padout, input padin);
+   assign padout = padin;
+endmodule // fiftyfivenm_io_ibuf
+
+/* Altera MAX10 devices Output Buffer Primitive */
+module PADOUT (output padout, input padin, input oe);
+   assign padout  = padin;
+   assign oe = oe;
+endmodule // fiftyfivenm_io_obuf
+
+/* Altera MAX10 4-input non-fracturable LUT Primitive */
+module LUT4 (output dout,
+             input  din0, din1, din2, din3);
+
+/* Internal parameters which define the behaviour
+   of the LUT primitive.
+   lut_mask define the lut function, can be expressed in 16-digit bin or hex.
+   sum_lutc_input define the type of LUT (combinational | arithmetic).
+   dont_touch for retiming || carry options.
+   lpm_type for WYSIWYG */
+
+parameter lut_function = 16'hFFFF;
+//parameter dont_touch = "off";
+//parameter lpm_type = "fiftyfivenm_lcell_comb";
+//parameter sum_lutc_input = "datac";
+
+reg [1:0] lut_type;
+reg cout_rt;
+reg combout_rt;
+wire dataa_w;
+wire datab_w;
+wire datac_w;
+wire datad_w;
+wire cin_w;
+
+assign dataa_w = din0;
+assign datab_w = din1;
+assign datac_w = din2;
+assign datad_w = din3;
+
+function lut_data;
+input [15:0] mask;
+input        dataa, datab, datac, datad;
+reg [7:0]   s3;
+reg [3:0]   s2;
+reg [1:0]   s1;
+  begin
+       s3 = datad ? mask[15:8] : mask[7:0];
+       s2 = datac ?   s3[7:4]  :   s3[3:0];
+       s1 = datab ?   s2[3:2]  :   s2[1:0];
+       lut_data = dataa ? s1[1] : s1[0];
+  end
+
+endfunction
+
+initial begin
+    /*if (sum_lutc_input == "datac")*/ lut_type = 0;
+    /*else
+    if (sum_lutc_input == "cin")   lut_type = 1;
+    else begin
+      $error("Error in sum_lutc_input. Parameter %s is not a valid value.\n", sum_lutc_input);
+      $finish();
+    end*/
+end
+
+always @(dataa_w or datab_w or datac_w or datad_w or cin_w) begin
+    if (lut_type == 0) begin // logic function
+        combout_rt = lut_data(lut_function, dataa_w, datab_w,
+                            datac_w, datad_w);
+    end
+    else if (lut_type == 1) begin // arithmetic function
+        combout_rt = lut_data(lut_function, dataa_w, datab_w,
+                            cin_w, datad_w);
+    end
+    cout_rt = lut_data(lut_function, dataa_w, datab_w, cin_w, 'b0);
+end
+
+assign dout = combout_rt & 1'b1;
+//assign cout = cout_rt & 1'b1;
+
+endmodule // fiftyfivenm_lcell_comb
+
+/* Altera MAX10 D Flip-Flop Primitive */
+// TODO: Implement advanced simulation functions
+module dffeas ( output q,
+                input d, clk, clrn, prn, ena,
+		input asdata, aload, sclr, sload );
+
+parameter power_up="dontcare";
+parameter is_wysiwyg="false";
+  reg q;
+
+  always @(posedge clk)
+    q <= d;
+
+endmodule
+
+
+
diff --git a/techlibs/achronix/speedster22i/cells_map_speedster.v b/techlibs/achronix/speedster22i/cells_map_speedster.v
new file mode 100755
index 000000000..fb26eabf0
--- /dev/null
+++ b/techlibs/achronix/speedster22i/cells_map_speedster.v
@@ -0,0 +1,88 @@
+/*
+ *  yosys -- Yosys Open SYnthesis Suite
+ *
+ *  Copyright (C) 2012  Clifford Wolf <clifford@clifford.at>
+ *
+ *  Permission to use, copy, modify, and/or distribute this software for any
+ *  purpose with or without fee is hereby granted, provided that the above
+ *  copyright notice and this permission notice appear in all copies.
+ *
+ *  THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ *  WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ *  ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ *  WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ *  ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ *  OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+// Normal mode DFF negedge clk, negedge reset
+module  \$_DFF_N_ (input D, C, output Q);
+   parameter WYSIWYG="TRUE";
+   dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(1'b1), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0));
+endmodule
+// Normal mode DFF
+module  \$_DFF_P_ (input D, C, output Q);
+   parameter WYSIWYG="TRUE";
+   dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(1'b1), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0));
+endmodule
+
+// Async Active Low Reset DFF
+module  \$_DFF_PN0_ (input D, C, R, output Q);
+   parameter WYSIWYG="TRUE";
+   dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(R), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0));
+endmodule
+// Async Active High Reset DFF
+module  \$_DFF_PP0_ (input D, C, R, output Q);
+   parameter WYSIWYG="TRUE";
+   wire R_i = ~ R;
+   dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(R_i), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0));
+endmodule
+// Async Active Low Reset DFF
+module  \$_DFF_PN0_ (input D, C, R, output Q);
+   parameter WYSIWYG="TRUE";
+   dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(R), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0));
+endmodule
+/* */
+module  \$__DFFE_PP0 (input D, C, E, R, output Q); 
+   parameter WYSIWYG="TRUE";
+   wire E_i = ~ E;
+   dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(R), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(E_i), .sload(1'b0));
+endmodule
+
+// Input buffer map
+module \$__inpad (input I, output O);
+    PADIN _TECHMAP_REPLACE_ (.padout(O), .padin(I));
+endmodule
+
+// Output buffer map
+module \$__outpad (input I, output O);
+    PADOUT _TECHMAP_REPLACE_ (.padout(O), .padin(I), .oe(1'b1));
+endmodule
+
+// LUT Map
+/* 0 -> datac
+   1 -> cin */
+module \$lut (A, Y);
+   parameter WIDTH  = 0;
+   parameter LUT    = 0;
+   input [WIDTH-1:0] A;
+   output 	     Y;
+   generate
+      if (WIDTH == 1) begin
+	   assign Y = ~A[0]; // Not need to spend 1 logic cell for such an easy function
+      end else
+      if (WIDTH == 2) begin
+              LUT4 #(.lut_function({4{LUT}})) _TECHMAP_REPLACE_ (.dout(Y), .din0(A[0]), .din1(A[1]), .din2(1'b0),.din3(1'b0));
+      end else
+      if(WIDTH == 3) begin
+	      LUT4 #(.lut_function({2{LUT}})) _TECHMAP_REPLACE_ (.dout(Y), .din0(A[0]), .din1(A[1]), .din2(A[2]),.din3(1'b0));
+      end else
+      if(WIDTH == 4) begin
+             LUT4 #(.lut_function(LUT)) _TECHMAP_REPLACE_ (.dout(Y), .din0(A[0]), .din1(A[1]), .din2(A[2]), .din3(A[3]));
+      end else
+	   wire _TECHMAP_FAIL_ = 1;
+   endgenerate
+endmodule //
+
+