testsuite/gna: add a test for #2153

2 files changed, 132 insertions, 0 deletions

diff --git a/testsuite/gna/issue2153/issue.vhdl b/testsuite/gna/issue2153/issue.vhdl
new file mode 100644
index 000000000..f6a8cdf4c
--- /dev/null
+++ b/testsuite/gna/issue2153/issue.vhdl
@@ -0,0 +1,121 @@
+library ieee;
+  use ieee.std_logic_1164.all;
+
+entity sequencer is
+  generic (
+    seq : string
+  );
+  port (
+    clk  : in  std_logic;
+    data : out std_logic
+  );
+end entity sequencer;
+
+architecture rtl of sequencer is
+
+  signal index : natural := seq'low;
+
+  function to_bit (a : in character) return std_logic is
+    variable ret : std_logic;
+  begin
+    case a is
+      when '0' | '_' => ret := '0';
+      when '1' | '-' => ret := '1';
+      when others    => ret := 'X';
+    end case;
+    return ret;
+  end function to_bit;
+
+begin
+
+  process (clk) is
+  begin
+    if rising_edge(clk) then
+      if (index < seq'high) then
+        index <= index + 1;
+      end if;
+    end if;
+  end process;
+
+  data <= to_bit(seq(index));
+
+end architecture rtl;
+
+
+library ieee;
+  use ieee.std_logic_1164.all;
+  use ieee.numeric_std.all;
+
+entity issue is
+  port (
+    clk : in std_logic
+  );
+end entity issue;
+
+architecture psl of issue is
+
+  signal a, b, c, d : std_logic;
+
+begin
+
+  --                                          01234567890
+  SEQ_A : entity work.sequencer generic map ("_-____-____") port map (clk, a);
+  SEQ_B : entity work.sequencer generic map ("___-_____-_") port map (clk, b);
+
+  --                                          01234567890
+  SEQ_C : entity work.sequencer generic map ("_-___-_____") port map (clk, c);
+  SEQ_D : entity work.sequencer generic map ("_____-___-_") port map (clk, d);
+
+  default clock is rising_edge(clk);
+
+  -- Should hold, but fails at cycle 3
+  -- Potential GHDL bug?
+  -- This is similar to waveform 2.9(i) on page 16
+  -- in the book "A practical introduction to PSL"
+  BEFORE_0_a : assert always (a -> next (b before_ a))
+    report "BEFORE_0_a failed";
+
+  -- Should hold but does not at cycle 9
+  -- Potential GHDL bug?
+  -- This is similar to waveform 2.9(ii) on page 16
+  -- in the book "A practical introduction to PSL"
+  BEFORE_1_a : assert always (c -> next (d before_ c))
+    report "BEFORE_1_a failed";
+
+end architecture psl;
+
+library ieee;
+  use ieee.std_logic_1164.all;
+
+use std.env.all;
+
+
+entity test_issue is
+end entity test_issue;
+
+
+architecture sim of test_issue is
+
+  signal clk   : std_logic := '1';
+
+begin
+
+
+  clk <= not clk after 500 ps;
+
+  DUT : entity work.issue(psl) port map (clk);
+
+  -- stop simulation after 30 cycles
+  process
+    variable index : natural := 10;
+  begin
+    loop
+      wait until rising_edge(clk);
+      index := index - 1;
+      exit when index = 0;
+    end loop;
+    stop(0);
+  end process;
+
+
+end architecture sim;
diff --git a/testsuite/gna/issue2153/testsuite.sh b/testsuite/gna/issue2153/testsuite.sh
new file mode 100755
index 000000000..197a21ff9
--- /dev/null
+++ b/testsuite/gna/issue2153/testsuite.sh
@@ -0,0 +1,11 @@
+#! /bin/sh
+
+. ../../testenv.sh
+
+export GHDL_STD_FLAGS=--std=08
+analyze issue.vhdl
+elab_simulate issue
+
+clean
+
+echo "Test successful"