aboutsummaryrefslogtreecommitdiffstats
path: root/realtek_mst_i2c_spi.c
blob: c7de2fe7d10a4a82341031ffb9655db1a19846e2 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
/*
 * This file is part of the flashrom project.
 *
 * Copyright (C) 2020 The Chromium OS Authors
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <stdlib.h>
#include <stdint.h>
#include <stdio.h>
#include <string.h>
#include <time.h>
#include <errno.h>

#include "programmer.h"
#include "spi.h"
#include "i2c_helper.h"


#define MCU_I2C_SLAVE_ADDR	0x94
#define REGISTER_ADDRESS	(0x94 >> 1)
#define RTK_PAGE_SIZE		128
#define MAX_SPI_WAIT_RETRIES	1000

#define MCU_MODE 0x6F
#define 	MCU_ISP_MODE_MASK 0x80
#define 	START_WRITE_XFER 0xA0
#define 	WRITE_XFER_STATUS_MASK  0x20

#define MCU_DATA_PORT 0x70

#define MAP_PAGE_BYTE2 0x64
#define MAP_PAGE_BYTE1 0x65
#define MAP_PAGE_BYTE0 0x66

//opcodes
#define OPCODE_READ  3
#define OPCODE_WRITE 2

#define GPIO_CONFIG_ADDRESS 0x104F
#define GPIO_VALUE_ADDRESS  0xFE3F

struct realtek_mst_i2c_spi_data {
	int fd;
	int reset;
};

static int realtek_mst_i2c_spi_write_data(int fd, uint16_t addr, void *buf, uint16_t len)
{
	i2c_buffer_t data;
	if (i2c_buffer_t_fill(&data, buf, len))
		return SPI_GENERIC_ERROR;

	return i2c_write(fd, addr, &data) == len ? 0 : SPI_GENERIC_ERROR;
}

static int realtek_mst_i2c_spi_read_data(int fd, uint16_t addr, void *buf, uint16_t len)
{
	i2c_buffer_t data;
	if (i2c_buffer_t_fill(&data, buf, len))
		return SPI_GENERIC_ERROR;

	return i2c_read(fd, addr, &data) == len ? 0 : SPI_GENERIC_ERROR;
}

static int get_fd_from_context(const struct flashctx *flash)
{
	if (!flash || !flash->mst || !flash->mst->spi.data) {
		msg_perr("Unable to extract fd from flash context.\n");
		return SPI_GENERIC_ERROR;
	}
	const struct realtek_mst_i2c_spi_data *data =
		(const struct realtek_mst_i2c_spi_data *)flash->mst->spi.data;

	return data->fd;
}

static int realtek_mst_i2c_spi_write_register(int fd, uint8_t reg, uint8_t value)
{
	uint8_t command[] = { reg, value };
	return realtek_mst_i2c_spi_write_data(fd, REGISTER_ADDRESS, command, 2);
}

static int realtek_mst_i2c_spi_read_register(int fd, uint8_t reg, uint8_t *value)
{
	uint8_t command[] = { reg };
	int ret = realtek_mst_i2c_spi_write_data(fd, REGISTER_ADDRESS, command, 1);
	ret |= realtek_mst_i2c_spi_read_data(fd, REGISTER_ADDRESS, value, 1);

	return ret ? SPI_GENERIC_ERROR : 0;
}

static int realtek_mst_i2c_spi_wait_command_done(int fd, unsigned int offset, int mask,
		int target, int multiplier)
{
	uint8_t val;
	int tried = 0;
	int ret = 0;
	do {
		ret |= realtek_mst_i2c_spi_read_register(fd, offset, &val);
	} while (!ret && ((val & mask) != target) && ++tried < (MAX_SPI_WAIT_RETRIES*multiplier));

	if (tried == MAX_SPI_WAIT_RETRIES) {
		msg_perr("%s: Time out on sending command.\n", __func__);
		return -MAX_SPI_WAIT_RETRIES;
	}

	return (val & mask) != target ? SPI_GENERIC_ERROR : ret;
}

static int realtek_mst_i2c_spi_enter_isp_mode(int fd)
{
	int ret = realtek_mst_i2c_spi_write_register(fd, MCU_MODE, MCU_ISP_MODE_MASK);
	/* wait for ISP mode enter success */
	ret |= realtek_mst_i2c_spi_wait_command_done(fd, MCU_MODE, MCU_ISP_MODE_MASK, MCU_ISP_MODE_MASK, 1);

	if (ret)
		return ret;

	// set internal osc divider register to default to speed up MCU
	// 0x06A0 = 0x74
	ret |= realtek_mst_i2c_spi_write_register(fd, 0xF4, 0x9F);
	ret |= realtek_mst_i2c_spi_write_register(fd, 0xF5, 0x06);
	ret |= realtek_mst_i2c_spi_write_register(fd, 0xF4, 0xA0);
	ret |= realtek_mst_i2c_spi_write_register(fd, 0xF5, 0x74);

	return ret;
}

static int realtek_mst_i2c_execute_write(int fd)
{
	int ret = realtek_mst_i2c_spi_write_register(fd, MCU_MODE, START_WRITE_XFER);
	ret |= realtek_mst_i2c_spi_wait_command_done(fd, MCU_MODE, WRITE_XFER_STATUS_MASK, 0, 1);
	return ret;
}

static int realtek_mst_i2c_spi_reset_mpu(int fd)
{
	uint8_t mcu_mode_val;
	int ret = realtek_mst_i2c_spi_read_register(fd, MCU_MODE, &mcu_mode_val);
	if (ret || (mcu_mode_val & MCU_ISP_MODE_MASK) == 0) {
		msg_perr("%s: MST not in ISP mode, cannot perform MCU reset.\n", __func__);
		return SPI_GENERIC_ERROR;
	}

	// 0xFFEE[1] = 1;
	uint8_t val = 0;
	ret |= realtek_mst_i2c_spi_read_register(fd, 0xEE, &val);
	ret |= realtek_mst_i2c_spi_write_register(fd, 0xEE, (val & 0xFD) | 0x02);
	return ret;
}

static int realtek_mst_i2c_spi_select_indexed_register(int fd, uint16_t address)
{
	int ret = 0;

	ret |= realtek_mst_i2c_spi_write_register(fd, 0xF4, 0x9F);
	ret |= realtek_mst_i2c_spi_write_register(fd, 0xF5, address >> 8);
	ret |= realtek_mst_i2c_spi_write_register(fd, 0xF4, address & 0xFF);

	return ret;
}

static int realtek_mst_i2c_spi_write_indexed_register(int fd, uint16_t address, uint8_t val)
{
	int ret = 0;

	ret |= realtek_mst_i2c_spi_select_indexed_register(fd, address);
	ret |= realtek_mst_i2c_spi_write_register(fd, 0xF5, val);

	return ret;
}

static int realtek_mst_i2c_spi_read_indexed_register(int fd, uint16_t address, uint8_t *val)
{
	int ret = 0;

	ret |= realtek_mst_i2c_spi_select_indexed_register(fd, address);
	ret |= realtek_mst_i2c_spi_read_register(fd, 0xF5, val);

	return ret;
}


/* Toggle the GPIO pin 88, this could be routed to different controls like write
 * protection or a led. */
static int realtek_mst_i2c_spi_toggle_gpio_88_strap(int fd, bool toggle)
{
	int ret = 0;
	uint8_t val = 0;

	/* Read register 0x104F into val. */
	ret |= realtek_mst_i2c_spi_read_indexed_register(fd, GPIO_CONFIG_ADDRESS, &val);
	/* Write 0x104F[3:0] = b0001 to enable the toggle of pin value. */
	ret |= realtek_mst_i2c_spi_write_indexed_register(fd, GPIO_CONFIG_ADDRESS, (val & 0xF0) | 0x01);

	/* Read register 0xFE3F into val. */
	ret |= realtek_mst_i2c_spi_read_indexed_register(fd, GPIO_VALUE_ADDRESS, &val);
	/* Write 0xFE3F[0] = b|toggle| to toggle pin value to low/high. */
	ret |= realtek_mst_i2c_spi_write_indexed_register(fd, GPIO_VALUE_ADDRESS, (val & 0xFE) | toggle);

	return ret;
}

static int realtek_mst_i2c_spi_send_command(const struct flashctx *flash,
				unsigned int writecnt, unsigned int readcnt,
				const unsigned char *writearr,
				unsigned char *readarr)
{
	unsigned i;
	int max_timeout_mul = 1;
	int ret = 0;

	if (writecnt > 4 || readcnt > 3 || writecnt == 0) {
		return SPI_GENERIC_ERROR;
	}

	int fd = get_fd_from_context(flash);
	if (fd < 0)
		return SPI_GENERIC_ERROR;

	/* First byte of writearr should be the spi opcode value, followed by the value to write. */
	writecnt--;

	/**
	 * Before dispatching a SPI opcode the MCU register 0x60 requires
	 * the following configuration byte set:
	 *
	 *  BIT0      - start [0] , end [1].
	 *  BITS[1-4] - counts.
	 *  BITS[5-7] - opcode type.
	 *
	 * | bit7 | bit6 | bit5 |
	 * +------+------+------+
	 * |  0   |  1   |  0   | ~ JEDEC_RDID,REMS,READ
	 * |  0   |  1   |  1   | ~ JEDEC_WRSR
	 * |  1   |  0   |  1   | ~ JEDEC_.. erasures.
	 */
	uint8_t ctrl_reg_val = (writecnt << 3) | (readcnt << 1);
	switch (writearr[0]) {
	/* WREN isn't a supported somehow? ignore it. */
	case JEDEC_WREN: return 0;
	/* WRSR requires BIT6 && BIT5 set. */
	case JEDEC_WRSR:
		ctrl_reg_val |= (1 << 5);
		ctrl_reg_val |= (2 << 5);
		break;
	/* Erasures require BIT7 && BIT5 set. */
	case JEDEC_CE_C7:
		max_timeout_mul *= 20; /* chip erasures take much longer! */
	/* FALLTHRU */
	case JEDEC_CE_60:
	case JEDEC_BE_52:
	case JEDEC_BE_D8:
	case JEDEC_BE_D7:
	case JEDEC_SE:
		ctrl_reg_val |= (1 << 5);
		ctrl_reg_val |= (4 << 5);
		break;
	default:
		/* Otherwise things like RDID,REMS,READ require BIT6 */
		ctrl_reg_val |= (2 << 5);
	}
	ret |= realtek_mst_i2c_spi_write_register(fd, 0x60, ctrl_reg_val);
	ret |= realtek_mst_i2c_spi_write_register(fd, 0x61, writearr[0]); /* opcode */

	for (i = 0; i < writecnt; ++i)
		ret |= realtek_mst_i2c_spi_write_register(fd, 0x64 + i, writearr[i + 1]);
	ret |= realtek_mst_i2c_spi_write_register(fd, 0x60, ctrl_reg_val | 0x1);
	if (ret)
		return ret;

	ret = realtek_mst_i2c_spi_wait_command_done(fd, 0x60, 0x01, 0, max_timeout_mul);
	if (ret)
		return ret;

	for (i = 0; i < readcnt; ++i)
		ret |= realtek_mst_i2c_spi_read_register(fd, 0x67 + i, &readarr[i]);

	return ret;
}

static int realtek_mst_i2c_spi_map_page(int fd, uint32_t addr)
{
	int ret = 0;

	uint8_t block_idx = (addr >> 16) & 0xff;
	uint8_t page_idx  = (addr >>  8) & 0xff;
	uint8_t byte_idx  =  addr        & 0xff;

	ret |= realtek_mst_i2c_spi_write_register(fd, MAP_PAGE_BYTE2, block_idx);
	ret |= realtek_mst_i2c_spi_write_register(fd, MAP_PAGE_BYTE1, page_idx);
	ret |= realtek_mst_i2c_spi_write_register(fd, MAP_PAGE_BYTE0, byte_idx);

	return ret ? SPI_GENERIC_ERROR : 0;
}

static int realtek_mst_i2c_spi_write_page(int fd, uint8_t reg, const uint8_t *buf, unsigned int len)
{
	/**
	 * Using static buffer with maximum possible size,
	 * extra byte is needed for prefixing the data port register at index 0.
	 */
	uint8_t wbuf[RTK_PAGE_SIZE + 1] = { MCU_DATA_PORT };
	if (len > RTK_PAGE_SIZE)
		return SPI_GENERIC_ERROR;

	memcpy(&wbuf[1], buf, len);

	return realtek_mst_i2c_spi_write_data(fd, REGISTER_ADDRESS, wbuf, len + 1);
}

static int realtek_mst_i2c_spi_read(struct flashctx *flash, uint8_t *buf,
			unsigned int start, unsigned int len)
{
	unsigned i;
	int ret = 0;

	if (start & 0xff)
		return default_spi_read(flash, buf, start, len);

	int fd = get_fd_from_context(flash);
	if (fd < 0)
		return SPI_GENERIC_ERROR;

	start--;
	ret |= realtek_mst_i2c_spi_write_register(fd, 0x60, 0x46); // **
	ret |= realtek_mst_i2c_spi_write_register(fd, 0x61, OPCODE_READ);
	ret |= realtek_mst_i2c_spi_map_page(fd, start);
	ret |= realtek_mst_i2c_spi_write_register(fd, 0x6a, 0x03);
	ret |= realtek_mst_i2c_spi_write_register(fd, 0x60, 0x47); // **
	if (ret)
		return ret;

	ret = realtek_mst_i2c_spi_wait_command_done(fd, 0x60, 0x01, 0, 1);
	if (ret)
		return ret;

	/**
	 * The first byte is just a null, probably a status code?
	 * Advance the read by a offset of one byte and continue.
	 */
	uint8_t dummy;
	realtek_mst_i2c_spi_read_register(fd, MCU_DATA_PORT, &dummy);

	for (i = 0; i < len; i += RTK_PAGE_SIZE) {
		ret |= realtek_mst_i2c_spi_read_data(fd, REGISTER_ADDRESS,
				buf + i, min(len - i, RTK_PAGE_SIZE));
		if (ret)
			return ret;
	}

	return ret;
}

static int realtek_mst_i2c_spi_write_256(struct flashctx *flash, const uint8_t *buf,
				unsigned int start, unsigned int len)
{
	unsigned i;
	int ret = 0;

	if (start & 0xff)
		return default_spi_write_256(flash, buf, start, len);

	int fd = get_fd_from_context(flash);
	if (fd < 0)
		return SPI_GENERIC_ERROR;

	ret |= realtek_mst_i2c_spi_write_register(fd, 0x6D, 0x02); /* write opcode */
	ret |= realtek_mst_i2c_spi_write_register(fd, 0x71, (RTK_PAGE_SIZE - 1)); /* fit len=256 */

	for (i = 0; i < len; i += RTK_PAGE_SIZE) {
		uint16_t page_len = min(len - i, RTK_PAGE_SIZE);
		if (len - i < RTK_PAGE_SIZE)
			ret |= realtek_mst_i2c_spi_write_register(fd, 0x71, page_len-1);
		ret |= realtek_mst_i2c_spi_map_page(fd, start + i);
		if (ret)
			break;

		/* Wait for empty buffer. */
		ret |= realtek_mst_i2c_spi_wait_command_done(fd, MCU_MODE, 0x10, 0x10, 1);
		if (ret)
			break;

		ret |= realtek_mst_i2c_spi_write_page(fd, MCU_DATA_PORT,
				buf + i, page_len);
		if (ret)
			break;
		ret |= realtek_mst_i2c_execute_write(fd);
		if (ret)
			break;
		update_progress(flash, FLASHROM_PROGRESS_WRITE, i + RTK_PAGE_SIZE, len);
	}

	return ret;
}

static int realtek_mst_i2c_spi_write_aai(struct flashctx *flash, const uint8_t *buf,
				 unsigned int start, unsigned int len)
{
	msg_perr("%s: AAI write function is not supported.\n", __func__);
	return SPI_GENERIC_ERROR;
}

static int realtek_mst_i2c_spi_shutdown(void *data)
{
	int ret = 0;
	struct realtek_mst_i2c_spi_data *realtek_mst_data =
		(struct realtek_mst_i2c_spi_data *)data;
	int fd = realtek_mst_data->fd;
	ret |= realtek_mst_i2c_spi_toggle_gpio_88_strap(fd, false);
	if (realtek_mst_data->reset) {
		/*
		 * Return value for reset mpu is not checked since
		 * the return value is not guaranteed to be 0 on a
		 * success reset. Currently there is no way to fix
		 * that. For more details see b:147402710.
		 */
		realtek_mst_i2c_spi_reset_mpu(fd);
	}
	i2c_close(fd);
	free(data);

	return ret;
}

static const struct spi_master spi_master_i2c_realtek_mst = {
	.max_data_read = 16,
	.max_data_write = 8,
	.command = realtek_mst_i2c_spi_send_command,
	.multicommand = default_spi_send_multicommand,
	.read = realtek_mst_i2c_spi_read,
	.write_256 = realtek_mst_i2c_spi_write_256,
	.write_aai = realtek_mst_i2c_spi_write_aai,
	.shutdown = realtek_mst_i2c_spi_shutdown,
};

static int get_params(int *reset, int *enter_isp)
{
	char *reset_str = NULL, *isp_str = NULL;
	int ret = 0;

	reset_str = extract_programmer_param("reset-mcu");
	if (reset_str) {
		if (reset_str[0] == '1') {
			*reset = 1;
		} else if (reset_str[0] == '0') {
			*reset = 0;
		} else {
			msg_perr("%s: Incorrect param format, reset-mcu=1 or 0.\n", __func__);
			ret = SPI_GENERIC_ERROR;
		}
	} else {
		*reset = 0; /* Default behaviour is no MCU reset on tear-down. */
	}
	free(reset_str);

	isp_str = extract_programmer_param("enter-isp");
	if (isp_str) {
		if (isp_str[0] == '1') {
			*enter_isp = 1;
		} else if (isp_str[0] == '0') {
			*enter_isp = 0;
		} else {
			msg_perr("%s: Incorrect param format, enter-isp=1 or 0.\n", __func__);
			ret = SPI_GENERIC_ERROR;
		}
	} else {
		*enter_isp = 1; /* Default behaviour is enter ISP on setup. */
	}
	free(isp_str);

	return ret;
}

static int realtek_mst_i2c_spi_init(void)
{
	int ret = 0;
	int reset = 0, enter_isp = 0;

	if (get_params(&reset, &enter_isp))
		return SPI_GENERIC_ERROR;

	int fd = i2c_open_from_programmer_params(REGISTER_ADDRESS, 0);
	if (fd < 0)
		return fd;

	if (enter_isp) {
		ret |= realtek_mst_i2c_spi_enter_isp_mode(fd);
		if (ret)
			return ret;
	}

	ret |= realtek_mst_i2c_spi_toggle_gpio_88_strap(fd, true);
	if (ret) {
		msg_perr("Unable to toggle gpio 88 strap to True.\n");
		return ret;
	}

	struct realtek_mst_i2c_spi_data *data = calloc(1, sizeof(*data));
	if (!data) {
		msg_perr("Unable to allocate space for extra SPI master data.\n");
		return SPI_GENERIC_ERROR;
	}

	data->fd = fd;
	data->reset = reset;
	return register_spi_master(&spi_master_i2c_realtek_mst, data);
}

const struct programmer_entry programmer_realtek_mst_i2c_spi = {
	.name			= "realtek_mst_i2c_spi",
	.type			= OTHER,
	.devs.note		= "Device files /dev/i2c-*.\n",
	.init			= realtek_mst_i2c_spi_init,
	.map_flash_region	= fallback_map,
	.unmap_flash_region	= fallback_unmap,
	.delay			= internal_delay,
};