aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--board_enable.c89
-rw-r--r--flash.h8
-rw-r--r--it87spi.c33
-rw-r--r--wbsio_spi.c10
4 files changed, 63 insertions, 77 deletions
diff --git a/board_enable.c b/board_enable.c
index ac305288..57677df6 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -44,26 +44,26 @@ void w836xx_ext_leave(uint16_t port)
OUTB(0xAA, port);
}
-/* General functions for reading/writing Winbond Super I/Os. */
-unsigned char wbsio_read(uint16_t index, uint8_t reg)
+/* Generic Super I/O helper functions */
+uint8_t sio_read(uint16_t port, uint8_t reg)
{
- OUTB(reg, index);
- return INB(index + 1);
+ OUTB(reg, port);
+ return INB(port + 1);
}
-void wbsio_write(uint16_t index, uint8_t reg, uint8_t data)
+void sio_write(uint16_t port, uint8_t reg, uint8_t data)
{
- OUTB(reg, index);
- OUTB(data, index + 1);
+ OUTB(reg, port);
+ OUTB(data, port + 1);
}
-void wbsio_mask(uint16_t index, uint8_t reg, uint8_t data, uint8_t mask)
+void sio_mask(uint16_t port, uint8_t reg, uint8_t data, uint8_t mask)
{
uint8_t tmp;
- OUTB(reg, index);
- tmp = INB(index + 1) & ~mask;
- OUTB(tmp | (data & mask), index + 1);
+ OUTB(reg, port);
+ tmp = INB(port + 1) & ~mask;
+ OUTB(tmp | (data & mask), port + 1);
}
/**
@@ -73,30 +73,30 @@ void wbsio_mask(uint16_t index, uint8_t reg, uint8_t data, uint8_t mask)
* - Agami Aruma
* - IWILL DK8-HTX
*/
-static int w83627hf_gpio24_raise(uint16_t index, const char *name)
+static int w83627hf_gpio24_raise(uint16_t port, const char *name)
{
- w836xx_ext_enter(index);
+ w836xx_ext_enter(port);
/* Is this the W83627HF? */
- if (wbsio_read(index, 0x20) != 0x52) { /* Super I/O device ID reg. */
+ if (sio_read(port, 0x20) != 0x52) { /* Super I/O device ID reg. */
fprintf(stderr, "\nERROR: %s: W83627HF: Wrong ID: 0x%02X.\n",
- name, wbsio_read(index, 0x20));
- w836xx_ext_leave(index);
+ name, sio_read(port, 0x20));
+ w836xx_ext_leave(port);
return -1;
}
/* PIN89S: WDTO/GP24 multiplex -> GPIO24 */
- wbsio_mask(index, 0x2B, 0x10, 0x10);
+ sio_mask(port, 0x2B, 0x10, 0x10);
/* Select logical device 8: GPIO port 2 */
- wbsio_write(index, 0x07, 0x08);
+ sio_write(port, 0x07, 0x08);
- wbsio_mask(index, 0x30, 0x01, 0x01); /* Activate logical device. */
- wbsio_mask(index, 0xF0, 0x00, 0x10); /* GPIO24 -> output */
- wbsio_mask(index, 0xF2, 0x00, 0x10); /* Clear GPIO24 inversion */
- wbsio_mask(index, 0xF1, 0x10, 0x10); /* Raise GPIO24 */
+ sio_mask(port, 0x30, 0x01, 0x01); /* Activate logical device. */
+ sio_mask(port, 0xF0, 0x00, 0x10); /* GPIO24 -> output */
+ sio_mask(port, 0xF2, 0x00, 0x10); /* Clear GPIO24 inversion */
+ sio_mask(port, 0xF1, 0x10, 0x10); /* Raise GPIO24 */
- w836xx_ext_leave(index);
+ w836xx_ext_leave(port);
return 0;
}
@@ -113,27 +113,27 @@ static int w83627hf_gpio24_raise_2e(const char *name)
* - MSI K8T Neo2-F
* - MSI K8N-NEO3
*/
-static int w83627thf_gpio4_4_raise(uint16_t index, const char *name)
+static int w83627thf_gpio4_4_raise(uint16_t port, const char *name)
{
- w836xx_ext_enter(index);
+ w836xx_ext_enter(port);
/* Is this the W83627THF? */
- if (wbsio_read(index, 0x20) != 0x82) { /* Super I/O device ID reg. */
+ if (sio_read(port, 0x20) != 0x82) { /* Super I/O device ID reg. */
fprintf(stderr, "\nERROR: %s: W83627THF: Wrong ID: 0x%02X.\n",
- name, wbsio_read(index, 0x20));
- w836xx_ext_leave(index);
+ name, sio_read(port, 0x20));
+ w836xx_ext_leave(port);
return -1;
}
/* PINxxxxS: GPIO4/bit 4 multiplex -> GPIOXXX */
- wbsio_write(index, 0x07, 0x09); /* Select LDN 9: GPIO port 4 */
- wbsio_mask(index, 0x30, 0x02, 0x02); /* Activate logical device. */
- wbsio_mask(index, 0xF4, 0x00, 0x10); /* GPIO4 bit 4 -> output */
- wbsio_mask(index, 0xF6, 0x00, 0x10); /* Clear GPIO4 bit 4 inversion */
- wbsio_mask(index, 0xF5, 0x10, 0x10); /* Raise GPIO4 bit 4 */
+ sio_write(port, 0x07, 0x09); /* Select LDN 9: GPIO port 4 */
+ sio_mask(port, 0x30, 0x02, 0x02); /* Activate logical device. */
+ sio_mask(port, 0xF4, 0x00, 0x10); /* GPIO4 bit 4 -> output */
+ sio_mask(port, 0xF6, 0x00, 0x10); /* Clear GPIO4 bit 4 inversion */
+ sio_mask(port, 0xF5, 0x10, 0x10); /* Raise GPIO4 bit 4 */
- w836xx_ext_leave(index);
+ w836xx_ext_leave(port);
return 0;
}
@@ -151,14 +151,14 @@ static int w83627thf_gpio4_4_raise_4e(const char *name)
/**
* w83627: Enable MEMW# and set ROM size to max.
*/
-static void w836xx_memw_enable(uint16_t index)
+static void w836xx_memw_enable(uint16_t port)
{
- w836xx_ext_enter(index);
- if (!(wbsio_read(index, 0x24) & 0x02)) { /* Flash ROM enabled? */
+ w836xx_ext_enter(port);
+ if (!(sio_read(port, 0x24) & 0x02)) { /* Flash ROM enabled? */
/* Enable MEMW# and set ROM size select to max. (4M). */
- wbsio_mask(index, 0x24, 0x28, 0x28);
+ sio_mask(port, 0x24, 0x28, 0x28);
}
- w836xx_ext_leave(index);
+ w836xx_ext_leave(port);
}
/**
@@ -595,21 +595,18 @@ static int board_kontron_986lcd_m(const char *name)
static int board_biostar_p4m80_m4(const char *name)
{
/* enter IT87xx conf mode */
- OUTB(0x87, 0x2e);
- OUTB(0x01, 0x2e);
- OUTB(0x55, 0x2e);
- OUTB(0x55, 0x2e);
+ enter_conf_mode_ite(0x2e);
/* select right flash chip */
- wbsio_mask(0x2e, 0x22, 0x80, 0x80);
+ sio_mask(0x2e, 0x22, 0x80, 0x80);
/* bit 3: flash chip write enable
* bit 7: map flash chip at 1MB-128K (why though? ignoring this.)
*/
- wbsio_mask(0x2e, 0x24, 0x04, 0x04);
+ sio_mask(0x2e, 0x24, 0x04, 0x04);
/* exit IT87xx conf mode */
- wbsio_write(0x2e, 0x02, 0x02);
+ exit_conf_mode_ite(0x2e);
return 0;
}
diff --git a/flash.h b/flash.h
index 42cda8d0..835c919d 100644
--- a/flash.h
+++ b/flash.h
@@ -579,9 +579,9 @@ void print_supported_pcidevs(struct pcidev_status *devs);
/* board_enable.c */
void w836xx_ext_enter(uint16_t port);
void w836xx_ext_leave(uint16_t port);
-unsigned char wbsio_read(uint16_t index, uint8_t reg);
-void wbsio_write(uint16_t index, uint8_t reg, uint8_t data);
-void wbsio_mask(uint16_t index, uint8_t reg, uint8_t data, uint8_t mask);
+uint8_t sio_read(uint16_t port, uint8_t reg);
+void sio_write(uint16_t port, uint8_t reg, uint8_t data);
+void sio_mask(uint16_t port, uint8_t reg, uint8_t data, uint8_t mask);
int board_flash_enable(const char *vendor, const char *part);
void print_supported_boards(void);
@@ -737,6 +737,8 @@ int ich_spi_write_256(struct flashchip *flash, uint8_t * buf);
/* it87spi.c */
extern uint16_t it8716f_flashport;
+void enter_conf_mode_ite(uint16_t port);
+void exit_conf_mode_ite(uint16_t port);
int it87xx_probe_spi_flash(const char *name);
int it8716f_spi_command(unsigned int writecnt, unsigned int readcnt,
const unsigned char *writearr, unsigned char *readarr);
diff --git a/it87spi.c b/it87spi.c
index d0b2e224..da82937b 100644
--- a/it87spi.c
+++ b/it87spi.c
@@ -34,23 +34,10 @@ uint16_t it8716f_flashport = 0;
/* use fast 33MHz SPI (<>0) or slow 16MHz (0) */
int fast_spi = 1;
-/* Generic Super I/O helper functions */
-uint8_t regval(uint16_t port, uint8_t reg)
-{
- OUTB(reg, port);
- return INB(port + 1);
-}
-
-void regwrite(uint16_t port, uint8_t reg, uint8_t val)
-{
- OUTB(reg, port);
- OUTB(val, port + 1);
-}
-
/* Helper functions for most recent ITE IT87xx Super I/O chips */
#define CHIP_ID_BYTE1_REG 0x20
#define CHIP_ID_BYTE2_REG 0x21
-static void enter_conf_mode_ite(uint16_t port)
+void enter_conf_mode_ite(uint16_t port)
{
OUTB(0x87, port);
OUTB(0x01, port);
@@ -61,9 +48,9 @@ static void enter_conf_mode_ite(uint16_t port)
OUTB(0xaa, port);
}
-static void exit_conf_mode_ite(uint16_t port)
+void exit_conf_mode_ite(uint16_t port)
{
- regwrite(port, 0x02, 0x02);
+ sio_write(port, 0x02, 0x02);
}
static uint16_t find_ite_spi_flash_port(uint16_t port)
@@ -73,13 +60,13 @@ static uint16_t find_ite_spi_flash_port(uint16_t port)
enter_conf_mode_ite(port);
- id = regval(port, CHIP_ID_BYTE1_REG) << 8;
- id |= regval(port, CHIP_ID_BYTE2_REG);
+ id = sio_read(port, CHIP_ID_BYTE1_REG) << 8;
+ id |= sio_read(port, CHIP_ID_BYTE2_REG);
/* TODO: Handle more IT87xx if they support flash translation */
if (0x8716 == id || 0x8718 == id) {
/* NOLDN, reg 0x24, mask out lowest bit (suspend) */
- tmp = regval(port, 0x24) & 0xFE;
+ tmp = sio_read(port, 0x24) & 0xFE;
printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
0xFFFE0000, 0xFFFFFFFF, (tmp & 1 << 1) ? "en" : "dis");
printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
@@ -94,13 +81,13 @@ static uint16_t find_ite_spi_flash_port(uint16_t port)
if ((tmp & 0xe) && (!(tmp & 1 << 4))) {
printf("Enabling LPC write to serial flash\n");
tmp |= 1 << 4;
- regwrite(port, 0x24, tmp);
+ sio_write(port, 0x24, tmp);
}
printf("serial flash pin %i\n", (tmp & 1 << 5) ? 87 : 29);
/* LDN 0x7, reg 0x64/0x65 */
- regwrite(port, 0x07, 0x7);
- flashport = regval(port, 0x64) << 8;
- flashport |= regval(port, 0x65);
+ sio_write(port, 0x07, 0x7);
+ flashport = sio_read(port, 0x64) << 8;
+ flashport |= sio_read(port, 0x65);
}
exit_conf_mode_ite(port);
return flashport;
diff --git a/wbsio_spi.c b/wbsio_spi.c
index 9b82687b..3c8c7a62 100644
--- a/wbsio_spi.c
+++ b/wbsio_spi.c
@@ -32,24 +32,24 @@ static uint16_t wbsio_get_spibase(uint16_t port)
uint16_t flashport = 0;
w836xx_ext_enter(port);
- id = wbsio_read(port, 0x20);
+ id = sio_read(port, 0x20);
if (id != 0xa0) {
fprintf(stderr, "\nW83627 not found at 0x%x, id=0x%02x want=0xa0.\n", port, id);
goto done;
}
- if (0 == (wbsio_read(port, 0x24) & 2)) {
+ if (0 == (sio_read(port, 0x24) & 2)) {
fprintf(stderr, "\nW83627 found at 0x%x, but SPI pins are not enabled. (CR[0x24] bit 1=0)\n", port);
goto done;
}
- wbsio_write(port, 0x07, 0x06);
- if (0 == (wbsio_read(port, 0x30) & 1)) {
+ sio_write(port, 0x07, 0x06);
+ if (0 == (sio_read(port, 0x30) & 1)) {
fprintf(stderr, "\nW83627 found at 0x%x, but SPI is not enabled. (LDN6[0x30] bit 0=0)\n", port);
goto done;
}
- flashport = (wbsio_read(port, 0x62) << 8) | wbsio_read(port, 0x63);
+ flashport = (sio_read(port, 0x62) << 8) | sio_read(port, 0x63);
done:
w836xx_ext_leave(port);