diff options
author | Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> | 2010-07-21 10:26:01 +0000 |
---|---|---|
committer | Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> | 2010-07-21 10:26:01 +0000 |
commit | e7fdd6e9a17129da53b8f4104b58899b5a011458 (patch) | |
tree | 0bd5bf090f36ef8f444d37e5bf4f2238345ac617 /flashrom.8 | |
parent | 17e23ac9798e5e983232c42314d7affb2994925e (diff) | |
download | flashrom-e7fdd6e9a17129da53b8f4104b58899b5a011458.tar.gz flashrom-e7fdd6e9a17129da53b8f4104b58899b5a011458.tar.bz2 flashrom-e7fdd6e9a17129da53b8f4104b58899b5a011458.zip |
Add support for RayeR SPIPGM hardware as described in http://rayer.ic.cz/elektro/spipgm.htm
To use the RayeR driver, run
flashrom -p rayer_spi -V
Known bugs/limitations:
- Won't compile/work on non-x86 architectures.
- Will always use direct port I/O access.
Log follows:
flashrom v0.9.2-r1039 on MS-DOS 7 (i686), built with libpci 3.1.5, GCC
4.3.2, little endian
Calibrating delay loop... OK.
Initializing rayer_bitbang_spi programmer
Using port 0x378 as I/O base for parallel port access.
...
Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1
0xc2, id2 0x2015
...
Found chip "Macronix MX25L1605" (2048 KB, SPI) at physical address
0xffe00000.
...
No operations were specified.
Corresponding to flashrom svn r1093.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Martin Rehak <rayer@seznam.cz>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Diffstat (limited to 'flashrom.8')
-rw-r--r-- | flashrom.8 | 10 |
1 files changed, 10 insertions, 0 deletions
@@ -187,6 +187,9 @@ USB SPI programmer)" .sp .BR "* buspirate_spi" " (for SPI flash ROMs attached to a Bus Pirate)" .sp +.BR "* rayer_spi" " (for SPI flash ROMs attached to a RayeR parport \ +based programmer)" +.sp Some programmers have optional or mandatory parameters which are described in detail in the .B PROGRAMMER SPECIFIC INFO @@ -389,6 +392,10 @@ where can be any of .BR 30k ", " 125k ", " 250k ", " 1M ", " 2M ", " 2.6M ", " 4M ", " 8M (in Hz). The default is the maximum frequency of 8 MHz. +.TP +.BR "rayer_spi " programmer +No parameters defined yet. More information about the hardware is available at +http://rayer.ic.cz/elektro/spipgm.htm .SH EXIT STATUS flashrom exits with 0 on success, 1 on most failures but with 2 if /dev/mem (/dev/xsvc on Solaris) can not be opened and with 3 if a call to mmap() fails. @@ -411,6 +418,9 @@ needs PCI configuration space access and raw I/O port access. .BR gfxnvidia " and " drkaiser need PCI configuration space access and raw memory access. .sp +.B rayer_spi +needs raw I/O port access. +.sp .B satasii needs PCI configuration space read access and raw memory access. .sp |