diff options
Diffstat (limited to 'contrib/cp210x-program/build')
| -rw-r--r-- | contrib/cp210x-program/build/lib/cp210x/__init__.py | 4 | ||||
| -rw-r--r-- | contrib/cp210x-program/build/lib/cp210x/cp210x.py | 398 | ||||
| -rw-r--r-- | contrib/cp210x-program/build/lib/cp210x/eeprom.py | 180 | ||||
| -rw-r--r-- | contrib/cp210x-program/build/lib/cp210x/usb.py | 274 | ||||
| -rw-r--r-- | contrib/cp210x-program/build/lib/cp210x/valuefile.py | 234 | ||||
| -rwxr-xr-x | contrib/cp210x-program/build/scripts-2.6/cp210x-program | 266 |
6 files changed, 1356 insertions, 0 deletions
diff --git a/contrib/cp210x-program/build/lib/cp210x/__init__.py b/contrib/cp210x-program/build/lib/cp210x/__init__.py new file mode 100644 index 0000000..b761032 --- /dev/null +++ b/contrib/cp210x-program/build/lib/cp210x/__init__.py @@ -0,0 +1,4 @@ +# -*- coding: utf-8 -*- + +__author__ = "Johannes Hölzl <johannes.hoelzl@gmx.de>" +__license__ = "GNU LGPL" diff --git a/contrib/cp210x-program/build/lib/cp210x/cp210x.py b/contrib/cp210x-program/build/lib/cp210x/cp210x.py new file mode 100644 index 0000000..c51cb35 --- /dev/null +++ b/contrib/cp210x-program/build/lib/cp210x/cp210x.py @@ -0,0 +1,398 @@ +# -*- coding: utf-8 -*- +# Copyright (c) 2007 Johannes Hölzl <johannes.hoelzl@gmx.de> +# +# This library is covered by the GNU LGPL, read LICENSE for details. +"""Provides access to the EEPROM of Silabs CP210x devices + +The following classes are available: + +class Cp210xProgrammer: + Provides direct access to the CP2101, can be used to write single data + directly or via an EEPROM image. + +class EEPROM: + Can be used to read or write a hex file containing the EEPROM content + of an CP2101. Provides also access to the single fields in the EEPROM. +""" + +import ctypes +import usb + +__all__ = ['Cp210xProgrammer', 'Cp210xError'] + +CP2101_UART = 0x00 +CP2101_CONFIG = 0xFF + +CP2101_UART_ENABLE = 0x0001 +CP2101_UART_DISABLE = 0x0000 + +REG_VENDOR_ID = 0x3701 +REG_PRODUCT_ID = 0x3702 +REG_PRODUCT_STRING = 0x3703 +REG_SERIAL_NUMBER = 0x3704 +REG_CFG_ATTRIBUTES = 0x3705 +REG_MAX_POWER = 0x3706 +REG_VERSION = 0x3707 +REG_UNKNOWN = 0x3708 +REG_EEPROM = 0x3709 +REG_LOCK_VALUE = 0x370A +REG_PART_NUMBER = 0x370B + +SIZE_EEPROM = 0x0400 +SIZE_PRODUCT_STRING = 0x007D +SIZE_SERIAL_NUMBER = 0x003F +SIZE_BAUDRATES = 32 +SIZE_BAUDRATE_CFG = 10 +SIZE_BAUDRATE_TABLE = SIZE_BAUDRATES * SIZE_BAUDRATE_CFG +SIZE_VENDOR_STRING = 24 + +LCK_LOCKED = 0x00 +LCK_UNLOCKED = 0xFF + +VID_SILABS = 0x10C4 +PID_CP210x = 0xEA60 + +VALUES = [ + ('product_string', 'string'), + ('serial_number', 'string'), + ('product_id', 'id'), + ('vendor_id', 'id'), + ('version', 'version'), + ('bus_powered', 'boolean'), + ('max_power', 'int'), + ('locked', 'boolean'), + ('part_number', 'int'), + ('vendor_string', 'string'), + ('baudrate_table', 'list'), +] + +def iif(v, a, b): + if v: + return a + else: + return b + +def to_div2(p): + value = int(p / 2) + if (value * 2) < p: + value += 1 + return value + +def to_bcd(i): + assert i >= 0 and i <= 99 + return (i // 10) << 4 | (i % 10) + +def to_bcd2( (i, j) ): + return to_bcd(i) << 8 | to_bcd(j) + +def from_bcd(num): + return num & 0x0F + (num >> 4) * 10 + +def from_bcd2(data): + return (from_bcd(data >> 8), from_bcd(data & 0xFF)) + +def from_binary(data, le=True): + value = 0 + if le: + data = data[::-1] + for byte in data: + value = value << 8 | ord(byte) + return value + +def to_binary(value, size=2, le=True): + data = '' + for i in range(size): + data += chr(value & 0xFF) + value >>= 8 + if le: + return data + else: + return data[::-1] + +def parse_baudrate_cfg(data): + return (from_binary(data[0:2], le=False), + from_binary(data[2:4], le=False), + from_binary(data[4:5]), + from_binary(data[6:10])) + +def build_baudrate_cfg(baudgen, timer0reload, prescaler, baudrate): + return (to_binary(baudgen, le=False) + to_binary(timer0reload, le=False) + + to_binary(prescaler, 1) + '\x00' + to_binary(baudrate, 4)) + +class Cp210xError(IOError): + pass + +class DeviceLocked(Cp210xError): + pass + +class Cp210xProgrammer(object): + """Program an Silabs CP2101, CP2102 or CP2103 + + This modul provides access to Silabs CP210x devices to set some USB + descriptor fields and some USB descriptor strings. + + The following fields can be set: + + * Vendor ID + * Product ID + * Product String + * Serial Number + * Device Version + * Bus Powered + * max. Power consumption + + Either use libusb to find a device, and provide the device description + to the constructor, or use Cp210xProgrammer.list_device() to list all + devices matching certain pattern. + + To progamm the device open() it, set the data, and close() it. To have the + changed fields reread call reset() before closing it. + """ + + TIMEOUT = 300 #ms + + @classmethod + def list_devices(self, patterns=[{ 'idVendor': VID_SILABS, + 'idProduct': PID_CP210x }]): + """Yields a list of devices matching certain patterns. + + param patterns: This must be a list of dictionaries or pairs of string. + Each device in the usb tree is matched against all pattern in the + list. + + When an item is a dictionary all fields of the descriptors + are compared against the corresponding values in the dictionary. If + each value is equal, the device is yielded. + + When an item is a pair of strings. The first string must be the + dirname of the bus and the second string the filename of the device. + + For example: + + >> list(Cp210xProgrammer.list_device([{ 'idVendor': VID_SILABS, + 'idProduct': PID_CP210x }])) + [device(...)] + + """ + + usb.find_busses() + usb.find_devices() + + bus = usb.get_busses() + while bus: + dev = bus.contents.devices + while dev: + for pattern in patterns: + if isinstance(pattern, dict): + for name, value in pattern.items(): + if getattr(dev.contents.descriptor, name) != value: + break + else: + yield self(dev) + break + elif isinstance(pattern, tuple): + if (bus.contents.dirname == pattern[0] and + dev.contents.filename == pattern[1]): + yield self(dev) + break + dev = dev.contents.next + bus = bus.contents.next + + def __init__(self, dev_info): + self.dev_info = dev_info + self.handle = None + self._locked = None + + def open(self): + """Opens the device. + + Only after an successful call to open() data can be read from and + written to the device. + + Claims all resources associated with this device. + """ + self.handle = usb.open(self.dev_info) + if self.handle == 0: + self.handle = None + raise Cp210xError("Can't open device.") + usb.set_configuration(self.handle, 1) + usb.claim_interface(self.handle, 0) + + def reset(self): + """Force the USB stack to reset the device. + + Resets the device through an hard reset over the port to which the + device is connected. After that happend the EEPROM content in the device + is reread and the device's descriptors are the one written to it. + """ + assert self.handle is not None + usb.reset(self.handle) + + def close(self): + """Closes the device. + + Releases all resources associated with this device. + """ + assert self.handle is not None + usb.release_interface(self.handle, 0) + usb.close(self.handle) + self.handle = None + + def __del__(self): + if self.handle is not None: + self.close() + + def _set_config(self, value, index=0, data=None, request=CP2101_CONFIG): + assert self.handle is not None + if self.get_locked(): + raise DeviceLocked() + + if data is not None: + data_length = len(data) + else: + data_length = 0 + res = usb.control_msg(self.handle, usb.ENDPOINT_OUT | usb.TYPE_VENDOR, + request, value, index, data, data_length, + self.TIMEOUT) + if res < 0: + raise Cp210xError("Unable to send request %04X result=%d" + % (value, res)) + + def _set_config_string(self, value, content, max_length): + assert isinstance(content, basestring) + encoded = content.encode('utf-16-le') + assert len(encoded) <= max_length + self._set_config(value, data=chr(len(encoded) + 2) + "\x03" + encoded) + + def _get_config(self, value, length, index=0, request=CP2101_CONFIG): + assert self.handle is not None + data = ctypes.create_string_buffer(length) + res = usb.control_msg(self.handle, usb.ENDPOINT_IN | usb.TYPE_VENDOR, + request, value, index, data, length, + self.TIMEOUT) + if res < 0: + raise Cp210xError("Unable to send request, %04X result=%d" + % (value, res)) + return data.raw[:res] + + def _get_int8_config(self, value, index=0, request=CP2101_CONFIG): + return ord(self._get_config(value, 1, index=index, request=request)) + + def _get_int16_config(self, value, index=0, request=CP2101_CONFIG): + data = self._get_config(value, 2, index=index, request=request) + return ord(data[0]) << 8 | ord(data[1]) + + def get_eeprom_content(self): + """Reads the entire EEPROM content as one big 1024-byte blob. + """ + return self._get_config(REG_EEPROM, SIZE_EEPROM) + + def get_baudrate_content(self): + """Return the baudrate table as binary data. + """ + return self._get_config(REG_EEPROM, SIZE_BAUDRATE_TABLE) + + def get_baudrate_table(self): + """Returns the baudrate table. + + A list containing 4-tuples are returnes. + Each tuple containes the following data: + + * BaudGen: Value used to generate the real baudrate. + * Time0Reset: Value used to generate the usb timeout. + * Prescaler: Used to generate the real baudrate. + * Baudrate: The baudrate which activates this entry. + """ + data = self.get_baudrate_content() + return [parse_baudrate_cfg(data[pos:pos+SIZE_BAUDRATE_CFG]) + for pos in range(0, SIZE_BAUDRATE_TABLE, SIZE_BAUDRATE_CFG)] + + def set_baudrate_table(self, baudrates): + """Writes the baudrate table. + + See get_baudrate_table() for the structure of the table. + """ + assert len(baudrates) == SIZE_BAUDRATES + self.set_baudrate_content(data=''.join(build_baudrate_cfg(*cfg) + for cfg in baudrates)) + baudrate_table = property(get_baudrate_table, set_baudrate_table) + + def get_part_number(self): + """ The part number of the device. + + Returns: 1 for an CP2101 + 2 for an CP2102 + 3 for an CP2103 + """ + return self._get_int8_config(REG_PART_NUMBER) + + def get_locked(self): + """ The lock value of the device. + + When True is returnes no data can be written to the device. + """ + if self._locked is None: + self._locked = self._get_int8_config(REG_LOCK_VALUE) == LCK_LOCKED + return self._locked + + def set_eeprom_content(self, content): + """Writes an 1024-byte blob to the EEPROM + """ + assert len(content) == SIZE_EEPROM, ("EEPROM data must be %i bytes." + % SIZE_EEPROM) + assert isinstance(content, str), "EEPROM data must be string." + self._set_config(REG_EEPROM, data=content) + + def set_product_id(self, pid): + """Sets the Product ID + """ + assert pid > 0x0000 and pid < 0xFFFF + self._set_config(REG_PRODUCT_ID, pid) + + def set_vendor_id(self, vid): + """Sets the Vendor ID + """ + assert vid > 0x0000 and vid < 0xFFFF + self._set_config(REG_VENDOR_ID, vid) + + def set_product_string(self, product_string): + """Sets the product string. + + Be aware that the string will be stored as UTF-16 encoded and should not + exceed SIZE_PRODUCT_STRING + """ + self._set_config_string(REG_PRODUCT_STRING, product_string, + SIZE_PRODUCT_STRING) + + def set_serial_number(self, serial_number): + self._set_config_string(REG_SERIAL_NUMBER, serial_number, + SIZE_SERIAL_NUMBER) + + def set_max_power(self, max_power): + assert max_power >= 0 and max_power <= 500 + self._set_config(REG_MAX_POWER, to_div2(max_power)) + + def set_bus_powered(self, bus_powered): + if bus_powered: + self._set_config(REG_CFG_ATTRIBUTES, 0xC0) + else: + self._set_config(REG_CFG_ATTRIBUTES, 0x80) + + def set_version(self, version): + self._set_config(REG_VERSION, to_bcd2(version)) + + def set_locked(self, locked): + """ The lock value of the device. + + When True is returnes no data can be written to the device. + """ + if locked: + self._set_config(REG_LOCK_VALUE, LCK_LOCKED) + else: + self._set_config(REG_LOCK_VALUE, LCK_UNLOCKED) + + def set_values(self, values): + for name, value in values.items(): + if name not in ['part_number', 'vendor_string']: + getattr(self, "set_" + name) (value) + diff --git a/contrib/cp210x-program/build/lib/cp210x/eeprom.py b/contrib/cp210x-program/build/lib/cp210x/eeprom.py new file mode 100644 index 0000000..25f0372 --- /dev/null +++ b/contrib/cp210x-program/build/lib/cp210x/eeprom.py @@ -0,0 +1,180 @@ +# -*- coding: utf-8 -*- +# Copyright (c) 2007 Johannes Hölzl <johannes.hoelzl@gmx.de> +# +# This library is covered by the GNU LGPL, read LICENSE for details. + +import cp210x +from cp210x import from_binary, to_binary, iif, VALUES + +__all__ = ['EEPROM', 'HexFileError'] + +POS_BAUDRATE_TABLE = 0x0000 +POS_PART_NUMBER = 0x01FF +POS_PRODUCT_STRING = 0x0208 +POS_SERIAL_NUMBER = 0x0307 +POS_PRODUCT_ID = 0x0390 +POS_VENDOR_ID = 0x0392 +POS_VERSION = 0x0394 +POS_CFG_ATTRIBUTES = 0x03A1 +POS_MAX_POWER = 0x03A2 +POS_VENDOR_STRING = 0x03C3 +POS_LOCK_VALUE = 0x03FF + +class HexFileError(StandardError): + pass + +def checksum(line): + return sum(ord(c) for c in line) & 0xFF + +def _int_value(position, size, read=lambda x:x, write=lambda x:x): + def get(self): + return read(from_binary(self.get(position, size))) + def set(self, value): + self.set(position, to_binary(write(value), size)) + return property(get, set) + +def _str_value(position, max_size): + def get(self): + size = from_binary(self.get(position, 1)) + assert size <= (max_size + 2) and size >= 2 + assert self.get(position + 1, 1) == '\x03', "Missing 0x03 at %04X" % (position + 1) + return self.get(position + 2, size - 2).decode('utf-16-le') + + def set(self, value): + encoded = value.encode('utf-16-le') + assert len(encoded) <= max_size + self.set(position, chr(len(encoded) + 2) + '\x03' + encoded) + + return property(get, set) + +class EEPROM(object): + START_ADDRESS = 0x3600 + def __init__(self, content=None): + if isinstance(content, str) or content is None: + assert content is None or len(content) == cp210x.SIZE_EEPROM + self.content = content + elif isinstance(content, cp210x.Cp210xProgrammer): + self.content = content.get_eeprom_content() + else: + self.parse_hex_file(content.read()) + + def write_to_cp210x(self, cp210xDevice): + cp210xDevice.set_eeprom_content(self.content) + + def parse_hex_file(self, hex_content): + self.content = '' + address = self.START_ADDRESS + for tag in hex_content.split('\n'): + if not tag.startswith(':'): + raise HexFileError("Line doesn't start with ':'") + + try: + content = tag[1:].decode('hex') + except TypeError: + raise HexFileError("Hex data expected") + + if len(content) < 5: + raise HexFileError("Line to short") + + if checksum(content) != 0: + raise HexFileError("Checksum error") + + size = from_binary(content[0]) + tag_address = from_binary(content[1:3], le=False) + tag_type = from_binary(content[3:4]) + line = content[4:-1] + + if tag_type == 0x00: + if tag_address != address: + raise HexFileError("Expected address %04X but found %04X" + % (address, tag_address)) + self.content += line + address += len(line) + elif tag_type == 0x01: + if size != 0 or len(line) != 0: + raise HexFileError("Defekt end tag") + break + + else: + raise HexFileError("Unknown tag type %02X" % tag_type) + + def build_hex_file(self): + for tag_start in range(0, len(self.content), 0x10): + line = self.content[tag_start:tag_start+0x10] + address = self.START_ADDRESS + tag_start + tag = (to_binary(len(line), 1) + + to_binary(address, le=False) + + '\x00' + + line) + cs = checksum(tag) + if cs == 0: + tag += '\x00' + else: + tag += chr(0x100 - cs) + yield ":%s\n" % tag.encode('hex') + yield ":00000001FF\n" + + def write_hex_file(self, f): + if isinstance(f, str): + f = file(f, 'wb') + do_close = True + else: + do_close = False + for line in self.build_hex_file(): + f.write(line) + if do_close: + f.close() + + def read_hex_file(self, f): + if isinstance(f, str): + f = file(f, 'rb') + do_close = True + else: + do_close = False + self.parse_hex_file(f.read()) + if do_close: + f.close() + + def get(self, pos, length): + return self.content[pos:pos+length] + + def set(self, pos, data): + self.content = (self.content[:pos] + + data + + self.content[pos + len(data):]) + + def _get_baudrate_table(self): + dat = self.get(POS_BAUDRATE_TABLE, cp210x.SIZE_BAUDRATE_TABLE) + return [cp210x.parse_baudrate_cfg(dat[pos:pos+cp210x.SIZE_BAUDRATE_CFG]) + for pos in range(0, cp210x.SIZE_BAUDRATE_TABLE, + cp210x.SIZE_BAUDRATE_CFG)] + def _set_baudrate_table(self, baudrates): + assert len(baudrates) == cp210x.SIZE_BAUDRATES + self.set(POS_BAUDRATE_TABLE, + ''.join(cp210x.build_baudrate_cfg(*cfg) for cfg in baudrates)) + baudrate_table = property(_get_baudrate_table, _set_baudrate_table) + product_string = _str_value(POS_PRODUCT_STRING, cp210x.SIZE_PRODUCT_STRING) + serial_number = _str_value(POS_SERIAL_NUMBER, cp210x.SIZE_SERIAL_NUMBER) + part_number = _int_value(POS_PART_NUMBER, 1) + product_id = _int_value(POS_PRODUCT_ID, 2) + vendor_id = _int_value(POS_VENDOR_ID, 2) + version = _int_value(POS_VERSION, 2, + cp210x.from_bcd2, cp210x.to_bcd2) + bus_powered = _int_value(POS_CFG_ATTRIBUTES, 1, + lambda a: bool(a & 0x40), + lambda a: iif(a, 0xC0, 0x80)) + max_power = _int_value(POS_MAX_POWER, 1, lambda p: p*2, cp210x.to_div2) + vendor_string = _str_value(POS_VENDOR_STRING, cp210x.SIZE_VENDOR_STRING) + locked = _int_value(POS_LOCK_VALUE, 1, + lambda l: l == cp210x.LCK_LOCKED, + lambda b: iif(b, cp210x.LCK_LOCKED, + cp210x.LCK_UNLOCKED)) + + def get_values(self): + return dict((name, getattr(self, name)) for name, type in VALUES) + + def set_values(self, values): + for name, value in values.items(): + setattr(self, name, value) + + diff --git a/contrib/cp210x-program/build/lib/cp210x/usb.py b/contrib/cp210x-program/build/lib/cp210x/usb.py new file mode 100644 index 0000000..be70f82 --- /dev/null +++ b/contrib/cp210x-program/build/lib/cp210x/usb.py @@ -0,0 +1,274 @@ +# Python interface for "usb.h" version 0.1.4.4.4 +# +# Copyright (c) 2005 Robert Hoelzl <robert.hoelzl@gmx.de> +# Copyright (c) 2007 Johannes Hoelzl <johannes.hoelzl@gmx.de> +# +# This library is covered by the GNU LGPL, read LICENSE for details. + +from ctypes import * +import sys + +class LibUsbNotInstalled(OSError): + pass + +try: + if sys.platform == 'darwin': + PATH_MAX = 1024 + dll=cdll.LoadLibrary("libusb.dylib") + elif sys.platform == 'linux2': + PATH_MAX = 4096 + dll=cdll.LoadLibrary("libusb.so") + else: + raise NotImplementedError("Platform %s not supported by usb.py" % sys.platform) +except OSError: + raise LibUsbNotInstalled() + + +# helper functions +def func(f, *args, **retval): + f.restype = retval.get('retval', None) + f.argtypes = args + if retval.has_key('rename'): globals()[retval['rename']] = f + else: globals()[f.__name__[4:]] = f + +# constants +CLASS_PER_INTERFACE = 0 +USB_CLASS_AUDIO = 1 +CLASS_COMM = 2 +CLASS_HID = 3 +CLASS_PRINTER = 7 +CLASS_PTP = 6 +CLASS_MASS_STORAGE = 8 +CLASS_HUB = 9 +CLASS_DATA = 10 +CLASS_VENDOR_SPEC = 0xff + +DT_DEVICE = 0x01 +DT_CONFIG = 0x02 +DT_STRING = 0x03 +DT_INTERFACE = 0x04 +DT_ENDPOINT = 0x05 + +DT_HID = 0x21 +DT_REPORT = 0x22 +DT_PHYSICAL = 0x23 +DT_HUB = 0x29 + +DT_DEVICE_SIZE = 18 +DT_CONFIG_SIZE = 9 +DT_INTERFACE_SIZE = 9 +DT_ENDPOINT_SIZE = 7 +DT_ENDPOINT_AUDIO_SIZE = 9 # Audio extension +DT_HUB_NONVAR_SIZE = 7 + + +class descriptor_header(Structure): _fields_ = [ + ("bLength", c_uint8), + ("bDescriptorType", c_uint8) ] + + +class string_descriptor(Structure): _fields_ = [ + ("bLength", c_uint8), + ("bDescriptorType", c_uint8), + ("wData", c_uint*1) ] + +class hid_descriptor(Structure): _fields_ = [ + ("bLength", c_uint8), + ("bDescriptorType", c_uint8), + ("bcdHID", c_uint16), + ("bCountryCode", c_uint8), + ("bNumDescriptors", c_uint8) ] + +MAXENDPOINTS = 32 +class endpoint_descriptor(Structure): _fields_ = [ + ("bLength", c_uint8), + ("bDescriptorType", c_uint8), + ("bEndpointAddress", c_uint8), + ("bmAttributes", c_uint8), + ("wMaxPacketSize", c_uint16), + ("bInterval", c_uint8), + ("bRefresh", c_uint8), + ("bSynchAddress", c_uint8), + + ("extra", POINTER(c_uint8)), + ("extralen", c_int) ] + + +ENDPOINT_ADDRESS_MASK = 0x0f # in bEndpointAddress +ENDPOINT_DIR_MASK = 0x80 + +ENDPOINT_TYPE_MASK = 0x03 # in bmAttributes +ENDPOINT_TYPE_CONTROL = 0 +ENDPOINT_TYPE_ISOCHRONOUS = 1 +ENDPOINT_TYPE_BULK = 2 +ENDPOINT_TYPE_INTERRUPT = 3 + +MAXINTERFACES = 32 +class interface_descriptor(Structure): _fields_ = [ + ("bLength", c_uint8), + ("bDescriptorType", c_uint8), + ("bInterfaceNumber", c_uint8), + ("bAlternateSetting", c_uint8), + ("bNumEndpoints", c_uint8), + ("bInterfaceClass", c_uint8), + ("bInterfaceSubClass", c_uint8), + ("bInterfaceProtocol", c_uint8), + ("iInterface", c_uint8), + + ("endpoint", POINTER(endpoint_descriptor)), + + ("extra", POINTER(c_uint8)), + ("extralen", c_int) ] + +MAXALTSETTING = 128 # Hard limit +class interface(Structure): _fields_ = [ + ("altsetting", POINTER(interface_descriptor)), + + ("num_altsetting", c_int) ] + +MAXCONFIG = 8 +class config_descriptor(Structure): _fields_ = [ + ("bLength", c_uint8), + ("bDescriptorType", c_uint8), + ("wTotalLength", c_uint16), + ("bNumInterfaces", c_uint8), + ("bConfigurationValue", c_uint8), + ("iConfiguration", c_uint16), + ("bmAttributes", c_uint8), + ("MaxPower", c_uint8), + + ("interface", POINTER(interface)), + + ("extra", POINTER(c_uint8)), # Extra descriptors + ("extralen", c_int) ] + +class device_descriptor(Structure): _fields_ = [ + ("bLength", c_uint8), + ("bDescriptorType", c_uint8), + ("bcdUSB", c_uint16), + ("bDeviceClass", c_uint8), + ("bDeviceSubClass", c_uint8), + ("bDeviceProtocol", c_uint8), + ("bMaxPacketSize0", c_uint8), + ("idVendor", c_uint16), + ("idProduct", c_uint16), + ("bcdDevice", c_uint16), + ("iManufacturer", c_uint8), + ("iProduct", c_uint8), + ("iSerialNumber", c_uint8), + ("bNumConfigurations", c_uint8) ] + +class ctrl_setup(Structure): _fields_ = [ + ("bRequestType", c_uint8), + ("bRequest", c_uint8), + ("wValue", c_uint16), + ("wIndex", c_uint16), + ("wLength", c_uint16) ] + + +REQ_GET_STATUS = 0x00 +REQ_CLEAR_FEATURE = 0x01 +# 0x02 is reserved +REQ_SET_FEATURE = 0x03 +# 0x04 is reserved +REQ_SET_ADDRESS = 0x05 +REQ_GET_DESCRIPTOR = 0x06 +REQ_SET_DESCRIPTOR = 0x07 +REQ_GET_CONFIGURATION = 0x08 +REQ_SET_CONFIGURATION = 0x09 +REQ_GET_INTERFACE = 0x0A +REQ_SET_INTERFACE = 0x0B +REQ_SYNCH_FRAME = 0x0C + +TYPE_STANDARD = (0x00 << 5) +TYPE_CLASS = (0x01 << 5) +TYPE_VENDOR = (0x02 << 5) +TYPE_RESERVED = (0x03 << 5) + +RECIP_DEVICE = 0x00 +RECIP_INTERFACE = 0x01 +RECIP_ENDPOINT = 0x02 +RECIP_OTHER = 0x03 + +ENDPOINT_IN = 0x80 +ENDPOINT_OUT = 0x00 + +# Error codes +ERROR_BEGIN = 500000 + +#if 1 +#define USB_LE16_TO_CPU(x) do { x = ((x & 0xff) << 8) | ((x & 0xff00) >> 8); } while(0) +#else +#define USB_LE16_TO_CPU(x) +#endif + +device_p = POINTER("device") +bus_p = POINTER("bus") + +class device(Structure): _fields_ = [ + ("next", device_p), + ("prev", device_p), + ("filename", c_char*(PATH_MAX + 1)), + + ("bus", bus_p), + ("descriptor", device_descriptor), + ("config", POINTER(config_descriptor)), + + ("dev", c_void_p), # Darwin support + + ("devnum", c_char), + + ("num_children", c_uint8), + ("children", POINTER(device_p)) ] +SetPointerType(device_p, device) + +class bus(Structure): _fields_ = [ + ("next", bus_p), + ("prev", bus_p), + + ("dirname", c_char*(PATH_MAX + 1)), + + ("devices", device_p), + ("location", c_uint), + + ("root_dev", device_p) ] +SetPointerType(bus_p, bus) + + +dev_handle_p = c_void_p + + +func(dll.usb_open, device_p, retval=dev_handle_p, rename="_open") +func(dll.usb_close, dev_handle_p, retval=c_int) +func(dll.usb_get_string, dev_handle_p, c_int, c_int, c_char_p, c_int, retval=c_int) +func(dll.usb_get_string_simple, dev_handle_p, c_int, c_char_p, c_int, retval=c_int) +func(dll.usb_get_descriptor_by_endpoint, dev_handle_p, c_int, c_uint8, c_uint8, c_void_p, c_int, retval=c_int) +func(dll.usb_get_descriptor, dev_handle_p, c_uint8, c_uint8, c_void_p, c_int, retval=c_int) + +func(dll.usb_bulk_write, dev_handle_p, c_int, c_char_p, c_int, c_int, retval=c_int) +func(dll.usb_bulk_read, dev_handle_p, c_int, c_char_p, c_int, c_int, retval=c_int) +func(dll.usb_interrupt_write, dev_handle_p, c_int, c_char_p, c_int, c_int, retval=c_int) +func(dll.usb_interrupt_read, dev_handle_p, c_int, c_char_p, c_int, c_int, retval=c_int) +func(dll.usb_control_msg, dev_handle_p, c_int, c_int, c_int, c_int, c_char_p, c_int, c_int, retval=c_int) +func(dll.usb_set_configuration, dev_handle_p, c_int, retval=c_int) +func(dll.usb_claim_interface, dev_handle_p, c_int, retval=c_int) +func(dll.usb_release_interface, dev_handle_p, c_int, retval=c_int) +func(dll.usb_set_altinterface, dev_handle_p, c_int, retval=c_int) +func(dll.usb_resetep, dev_handle_p, c_uint16, retval=c_int) +func(dll.usb_clear_halt, dev_handle_p, c_uint16, retval=c_int) +func(dll.usb_reset, dev_handle_p, retval=c_int) + +func(dll.usb_strerror, retval=c_char_p) + +func(dll.usb_init) +func(dll.usb_set_debug, c_int) +func(dll.usb_find_busses, retval=c_int) +func(dll.usb_find_devices, retval=c_int) +func(dll.usb_device, dev_handle_p, retval=device_p, rename="get_device") +func(dll.usb_get_busses, retval=bus_p) + +func(dll.usb_detach_kernel_driver_np, dev_handle_p, c_int, retval=c_int) + +# workaround for bug in ctypes 0.9.6 (cannot create functions with c_void_p as retval) +def open(dev): + return cast(_open(dev), dev_handle_p) diff --git a/contrib/cp210x-program/build/lib/cp210x/valuefile.py b/contrib/cp210x-program/build/lib/cp210x/valuefile.py new file mode 100644 index 0000000..ae665d2 --- /dev/null +++ b/contrib/cp210x-program/build/lib/cp210x/valuefile.py @@ -0,0 +1,234 @@ +# -*- coding: utf-8 -*- +# Copyright (c) 2007 Johannes Hölzl <johannes.hoelzl@gmx.de> +# +# This library is covered by the GNU LGPL, read LICENSE for details. + +# For documentation of the baudrate table see: +# +# [AN205] Silicon Labs Application Note 205 Rev. 0.3 +# http://www.silabs.com/public/documents/tpub_doc/anote/Microcontrollers/Interface/en/an205.pdf + +import re +from ConfigParser import ConfigParser + +import cp210x +from cp210x import VALUES, SIZE_BAUDRATES + +__all__ = ['read_file', 'write_file', 'update_values', 'PrescalerIsZero', + 'ValuesFileError'] + +class ValuesError(StandardError): + pass + +class PrescalerIsZero(ValuesError): + pass + +class ValuesFileError(ValuesError): + pass + +version_pattern = re.compile(r'^\s*(\d\d?)\.(\d\d?)\s*$') +def read_version(s): + match = version_pattern.match(s) + if match is None: + raise ValueError("Version does not match 'xx.yy'") + return (int(match.group(1)), int(match.group(2))) +def write_version(v): + return "%d.%02d" % v + +def read_hex(s): + return int(s.strip(), 16) + +def write_hex(num): + return "%04X" % num + +def write_bool(b): + if b: + return 'yes' + else: + return 'no' + +def read_bool(s): + s = s.strip().lower() + if s not in ['true', 'yes', 'false', 'no']: + raise ValueError("Boolean must be either 'true', 'yes', 'false' or 'no'.") + return s in ['true', 'yes'] + +def read_baudrate_info(s): + values = s.split(',') + if len(values) != 3: + raise ValueError("Baudrate info must be three comma-separated items") + try: + baudgen = read_hex(values[0]) + except ValueError: + raise ValueError("The first baudrate info must be a hex-value") + try: + timer0 = read_hex(values[1]) + except ValueError: + raise ValueError("The second baudrate info must be a hex-value") + try: + prescale = int(values[2]) + except ValueError: + raise ValueError("The thirdbaudrate info must be a number") + return (baudgen, timer0, prescale) + +TYPES = { + 'boolean': (read_bool, write_bool), + 'int': (int, str), + 'id': (read_hex, write_hex), + 'string': (str, str), + 'version': (read_version, write_version), +} + +def read_file(fp): + cp = ConfigParser() + if isinstance(fp, str): + cp.read([fp]) + else: + cp.readfp(fp) + + values = {} + + for name, type in VALUES: + if name is 'baudrate_table': + continue + reader, _ = TYPES[type] + if cp.has_option('usb device', name): + try: + values[name] = reader(cp.get('usb device', name)) + except ValueError, err: + raise ValuesFileError("Key '%s': %s" % (name, str(err))) + + if cp.has_section('baudrate table'): + baudrate_table = [] + for name, value in cp.items('baudrate table'): + try: + baudrate = int(name) + except ValueError: + raise ValuesFileError("Key names in 'baudrate table' must be" + " baudrate numbers.") + try: + baudrate_table.append(read_baudrate_info(value) + (baudrate, )) + except ValueError, err: + raise ValuesFileError("Wrong baudrate info %i: %s" + % (baudrate, str(err))) + baudrate_table.sort(key=(lambda i: i[3]), reverse=True) + + values['baudrate_table'] = baudrate_table + return values + +def write_file(fp, values): + fp.write("[usb device]\n") + + for name, type in VALUES: + if name == 'baudrate_table': + continue + _, writer = TYPES[type] + if name in values: + fp.write("%s = %s\n" % (name, writer(values[name]))) + + if 'baudrate_table' in values: + fp.write("\n") + fp.write("[baudrate table]\n") + for (baudgen, timegen, prescaler, + baudrate) in sorted(values['baudrate_table'], key=(lambda i: i[3]), + reverse=True): + fp.write("%7d = %04X, %04X, %d # %s\n" + % (baudrate, baudgen, timegen, prescaler, + show_baudrate(baudgen, timegen, prescaler))) + +def calc_baudrate(baudgen, timegen, prescaler): + # This formulas are from AN205 page 5. + if prescaler == 0: + raise PrescalerIsZero("Prescaler is 0") + baudrate = (24000000. / prescaler) / (0x10000 - baudgen) + return (baudrate, (0x10000 - timegen) * 2) + +def show_baudrate(baudgen, timegen, prescaler): + try: + baudrate, timeout = calc_baudrate(baudgen, timegen, prescaler) + except PrescalerIsZero: + return "Wrong data, Prescaler is 0." + if timeout >= 1000: + timeout = "%1.3f ms" % (float(timeout) / 1000) + else: + timeout = "%d us" % timeout + if baudrate is None: + return ", %s" % (baudrate, timeout) + else: + return "%7.0f Baud, %s" % (baudrate, timeout) + +def update_values(v, new, dev): + old_baudrate_table = v.get('baudrate_table') + new_baudrate_table = new.get('baudrate_table') + + v.update(new) + + # update baudrate table + # it is needed, that the baudrate table has 32 entries when it is written + # to the eeprom or device. + if ((old_baudrate_table is not None or new_baudrate_table is not None) and + (new_baudrate_table is None or + len(new_baudrate_table) < SIZE_BAUDRATES)): + + if old_baudrate_table is not None: + if len(old_baudrate_table) < SIZE_BAUDRATES: + baudrate_table = old_baudrate_table + else: + baudrate_table = list(merge_baudrate_table(dev.baudrate_table, + old_baudrate_table)) + else: + baudrate_table = dev.baudrate_table + + if new_baudrate_table: + baudrate_table = list(merge_baudrate_table(baudrate_table, + new_baudrate_table)) + v['baudrate_table'] = baudrate_table + + + +def merge_baudrate_table(old, new): + for (old_info, (start, stop)) in zip(old, REQUEST_BAUDRATE_RANGES): + for baudgen, timer, prescaler, baudrate in new: + if ((start is None or baudrate <= start) and + baudrate >= stop): + yield (baudgen, timer, prescaler, baudrate) + break + else: + yield old_info + +REQUEST_BAUDRATE_RANGES = [ +# The table data is from AN205 Table 1 on page 1. +# Start End Default Baudrate + (None, 2457601), # Undefined + (2457600, 1474561), # Undefined + (1474560, 1053258), # Undefined + (1053257, 670255), # 921600 + ( 670254, 567139), # 576000 + ( 567138, 491521), # 500000 + ( 491520, 273067), # 460800 + ( 273066, 254235), # 256000 + ( 254234, 237833), # 250000 + ( 237832, 156869), # 230400 + ( 156868, 129348), # 153600 + ( 129347, 117029), # 128000 + ( 117028, 77609), # 115200 + ( 77608, 64112), # 76800 + ( 64111, 58054), # 64000 + ( 58053, 56281), # 57600 + ( 56280, 51559), # 56000 + ( 51558, 38602), # 51200 + ( 38601, 28913), # 38400 + ( 28912, 19251), # 28800 + ( 19250, 16063), # 19200 + ( 16062, 14429), # 16000 + ( 14428, 9613), # 14400 + ( 9612, 7208), # 9600 + ( 7207, 4804), # 7200 + ( 4803, 4001), # 4800 + ( 4000, 2401), # 4000 + ( 2400, 1801), # 2400 + ( 1800, 1201), # 1800 + ( 1200, 601), # 1200 + ( 600, 301), # 600 + ( 300, 57), # 300 +] diff --git a/contrib/cp210x-program/build/scripts-2.6/cp210x-program b/contrib/cp210x-program/build/scripts-2.6/cp210x-program new file mode 100755 index 0000000..524a123 --- /dev/null +++ b/contrib/cp210x-program/build/scripts-2.6/cp210x-program @@ -0,0 +1,266 @@ +#!/usr/bin/python +# -*- coding: utf-8 -*- +# Copyright (c) 2007 Johannes Hölzl <johannes.hoelzl@gmx.de> +# +# This library is covered by the GNU LGPL, read LICENSE for details. +"""\ +Provides access to the EEPROM in an Silabs CP210x. The data can be directly to +the device read or written. +""" +__author__ = "Johannes Hölzl <johannes.hoelzl@gmx.de>" +__license__ = "GNU LGPL" +__version__ = "0.2" + +import sys +import re +import string +import traceback +import optparse + +from cp210x import usb, valuefile, cp210x +from cp210x.eeprom import EEPROM, HexFileError +from cp210x.valuefile import read_baudrate_info, update_values, ValuesFileError +TRANS_UNDERSCORE = string.maketrans('_', '-') + +ERR_OK = 0 +ERR_WRONG_INPUT = -1 +ERR_INTERNAL = -2 +ERR_DEVICE_LOCKED = -3 +ERR_DEVICE_NOT_FOUND = -4 +ERR_DEVICE_ERROR = -5 + +def error(message, retval=-1): + sys.stderr.write(message + "\n") + sys.exit(retval) + +class Option(optparse.Option): + TYPES = list(optparse.Option.TYPES) + TYPE_CHECKER = dict(optparse.Option.TYPE_CHECKER) + for type, (reader, _) in valuefile.TYPES.items(): + if type in TYPES: + continue + TYPES.append(type) + def checker(self, name, value, reader=reader): + try: + return reader(value) + except ValueError, err: + raise optparse.OptionValueError("option %s: %s" % (name, + str(err))) + TYPE_CHECKER[type] = checker + +class OptionParser(optparse.OptionParser): + def error(self, msg): + error(msg, ERR_WRONG_INPUT) + + def __init__(self, *args, **kwargs): + if 'option_class' not in kwargs: + kwargs['option_class'] = Option + optparse.OptionParser.__init__(self, *args, **kwargs) + +def input_file(arg): + if arg is None or arg == '-': + return sys.stdin + else: + return file(arg, 'rb') + +def output_file(arg): + if arg is None or arg == '-': + return sys.stdout + else: + return file(arg, 'wb') + +def options_to_values(options): + values = {} + for name, type in cp210x.VALUES: + if name == "baudrate_table": + continue + value = getattr(options, name) + if value is not None: + values[name] = value + + if options.baudrate_table: + baudrate_table = [] + for s in options.baudrate_table: + try: + baudrate, info = s.split(':') + except TypeError: + error("option --set-baudrate: need two parts separated by ':'", + ERR_WRONG_INPUT) + try: + baudrate_table.append(read_baudrate_info(info) + + (int(baudrate), )) + except ValueError, err: + error("option --set-baudrate: %s" % str(err), + ERR_WRONG_INPUT) + + values['baudrate_table'] = baudrate_table + return values + +def find_device(patterns): + usb_patterns = [] + for pattern in patterns: + if ':' in pattern: + try: + vidString, pidString = pattern.split(':') + vid = int(vidString, 16) + pid = int(pidString, 16) + + except (TypeError, ValueError): + error("Match be either 'ddd/ddd' or 'hhhh:hhhh'.", + ERR_WRONG_INPUT) + + usb_patterns.append(dict(idVendor=vid, idProduct=pid)) + elif '/' in pattern: + try: + bus, device = pattern.split('/') + usb_patterns.append( (bus, device) ) + except (TypeError, ValueError): + error("Match be either 'ddd/ddd' or 'hhhh:hhhh'.", + ERR_WRONG_INPUT) + else: + error("Match be either 'ddd/ddd' or 'hhhh:hhhh'.", + ERR_WRONG_INPUT) + + for dev in cp210x.Cp210xProgrammer.list_devices(usb_patterns): + return dev + + error("No devices found", ERR_DEVICE_NOT_FOUND) + +def read_cp210x(options): + dev = find_device(options.match) + dev.open() + try: + eeprom = EEPROM(dev) + finally: + dev.close() + + if options.hex_output: + eeprom.write_hex_file(output_file(options.hex_output)) + if options.ini_output or not options.hex_output: + valuefile.write_file(output_file(options.ini_output), eeprom.get_values()) + +def write_cp210x(options): + dev = find_device(options.match) + dev.open() + try: + if options.hex_input or options.force_eeprom: + + if options.hex_input: + eeprom = EEPROM(input_file(options.hex_input)) + else: + eeprom = EEPROM(dev) + + values = eeprom.get_values() + if options.ini_input: + values = valuefile.read_file(input_file(options.ini_input)) + update_values(values, options_to_values(options), eeprom) + + eeprom.set_values(values) + + eeprom.write_to_cp210x(dev) + if options.reset_device: + dev.reset() + + else: + if options.ini_input: + values = valuefile.read_file(input_file(options.ini_input)) + else: + values = {} + update_values(values, options_to_values(options), dev) + dev.set_values(values) + + if options.reset_device: + dev.reset() + finally: + dev.close() + +def change_hexfile(options): + eeprom = EEPROM(input_file(options.hex_input)) + values = {} + if options.ini_input: + update_values(values, + valuefile.read_file(input_file(options.ini_input)), + eeprom) + update_values(values, options_to_values(options), eeprom) + eeprom.set_values(values) + if options.ini_output: + valuefile.write_file(output_file(options.ini_output), + eeprom.get_values()) + eeprom.write_hex_file(output_file(options.hex_output)) + +def parse_hexfile(options): + eeprom = EEPROM(input_file(options.hex_input)) + valuefile.write_file(output_file(options.ini_output), eeprom.get_values()) + +parser = OptionParser(version=__version__, description=__doc__) +parser.add_option("-r", "--read-cp210x", const=read_cp210x, + dest="action", action="store_const") +parser.add_option("-w", "--write-cp210x", const=write_cp210x, + dest="action", action="store_const") +parser.add_option("-c", "--change-hexfile", const=change_hexfile, + dest="action", action="store_const") +parser.add_option("-p", "--parse-hexfile", const=parse_hexfile, + dest="action", action="store_const") +parser.add_option("-F", "--hex-input", metavar="FILE") +parser.add_option("-f", "--hex-output", metavar="FILE") +parser.add_option("-I", "--ini-input", metavar="FILE") +parser.add_option("-i", "--ini-output", metavar="FILE") +for name, type in cp210x.VALUES: + if name == 'baudrate_table': + continue + parser.add_option("--set-" + name.translate(TRANS_UNDERSCORE), + dest=name, metavar=name.upper(), type=type) +parser.add_option("--set-baudrate", action="append", dest="baudrate_table") +parser.add_option("-m", "--match", action="append", metavar="PATTERN") +parser.add_option("--reset-device", action="store_true") +parser.add_option("--force-eeprom", action="store_true") + +parser.set_defaults( + action=read_cp210x, + hex_input=None, + hex_output=None, + ini_input=None, + ini_output=None, + match=[], + baudrate_table=[], + reset_device=False, + force_eeprom=False, +) + +def main(): + (options, _) = parser.parse_args() + if not options.match: + options.match = ['10C4:EA60', '10C4:EA61'] + options.action(options) + +if __name__ == '__main__': + try: + usb.init() + main() + + except cp210x.DeviceLocked: + error("Can not write data to device. Device is locked.", + ERR_DEVICE_LOCKED) + + except cp210x.Cp210xError, err: + error(str(err), ERR_DEVICE_ERROR) + + except IOError, err: + error(str(err), ERR_OTHER) + + except HexFileError, err: + error(str(err), ERR_OTHER) + + except ValuesFileError, err: + error(str(err), ERR_OTHER) + + except usb.LibUsbNotInstalled: + error("Package 'libusb' not installed.") + + except SystemExit, err: + raise + + except: + traceback.print_exc() + sys.exit(ERR_INTERNAL) + |