From 2c39ddc83452c34fedc86261ed1f96d7537adfd1 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 14 Dec 2015 21:28:10 +0100
Subject: [PATCH 502/513] net-next: mediatek: add switch driver for rt3050

This driver is very basic and only provides basic init and irq support.
Switchdev support for this device will follow.

Signed-off-by: John Crispin <blogic@openwrt.org>
---
 drivers/net/ethernet/mediatek/esw_rt3050.c |  640 ++++++++++++++++++++++++++++
 drivers/net/ethernet/mediatek/esw_rt3050.h |   29 ++
 2 files changed, 669 insertions(+)
 create mode 100644 drivers/net/ethernet/mediatek/esw_rt3050.c
 create mode 100644 drivers/net/ethernet/mediatek/esw_rt3050.h

--- /dev/null
+++ b/drivers/net/ethernet/mediatek/esw_rt3050.c
@@ -0,0 +1,640 @@
+/*   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; version 2 of the License
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
+ *   Copyright (C) 2009-2015 Felix Fietkau <nbd@nbd.name>
+ *   Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/skbuff.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/clk.h>
+#include <linux/of_net.h>
+#include <linux/of_mdio.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#include "mtk_eth_soc.h"
+
+#include <linux/ioport.h>
+#include <linux/mii.h>
+
+#include <ralink_regs.h>
+
+/* HW limitations for this switch:
+ * - No large frame support (PKT_MAX_LEN at most 1536)
+ * - Can't have untagged vlan and tagged vlan on one port at the same time,
+ *   though this might be possible using the undocumented PPE.
+ */
+
+#define RT305X_ESW_REG_ISR		0x00
+#define RT305X_ESW_REG_IMR		0x04
+#define RT305X_ESW_REG_FCT0		0x08
+#define RT305X_ESW_REG_PFC1		0x14
+#define RT305X_ESW_REG_ATS		0x24
+#define RT305X_ESW_REG_ATS0		0x28
+#define RT305X_ESW_REG_ATS1		0x2c
+#define RT305X_ESW_REG_ATS2		0x30
+#define RT305X_ESW_REG_PVIDC(_n)	(0x40 + 4 * (_n))
+#define RT305X_ESW_REG_VLANI(_n)	(0x50 + 4 * (_n))
+#define RT305X_ESW_REG_VMSC(_n)		(0x70 + 4 * (_n))
+#define RT305X_ESW_REG_POA		0x80
+#define RT305X_ESW_REG_FPA		0x84
+#define RT305X_ESW_REG_SOCPC		0x8c
+#define RT305X_ESW_REG_POC0		0x90
+#define RT305X_ESW_REG_POC1		0x94
+#define RT305X_ESW_REG_POC2		0x98
+#define RT305X_ESW_REG_SGC		0x9c
+#define RT305X_ESW_REG_STRT		0xa0
+#define RT305X_ESW_REG_PCR0		0xc0
+#define RT305X_ESW_REG_PCR1		0xc4
+#define RT305X_ESW_REG_FPA2		0xc8
+#define RT305X_ESW_REG_FCT2		0xcc
+#define RT305X_ESW_REG_SGC2		0xe4
+#define RT305X_ESW_REG_P0LED		0xa4
+#define RT305X_ESW_REG_P1LED		0xa8
+#define RT305X_ESW_REG_P2LED		0xac
+#define RT305X_ESW_REG_P3LED		0xb0
+#define RT305X_ESW_REG_P4LED		0xb4
+#define RT305X_ESW_REG_PXPC(_x)		(0xe8 + (4 * _x))
+#define RT305X_ESW_REG_P1PC		0xec
+#define RT305X_ESW_REG_P2PC		0xf0
+#define RT305X_ESW_REG_P3PC		0xf4
+#define RT305X_ESW_REG_P4PC		0xf8
+#define RT305X_ESW_REG_P5PC		0xfc
+
+#define RT305X_ESW_LED_LINK		0
+#define RT305X_ESW_LED_100M		1
+#define RT305X_ESW_LED_DUPLEX		2
+#define RT305X_ESW_LED_ACTIVITY		3
+#define RT305X_ESW_LED_COLLISION	4
+#define RT305X_ESW_LED_LINKACT		5
+#define RT305X_ESW_LED_DUPLCOLL		6
+#define RT305X_ESW_LED_10MACT		7
+#define RT305X_ESW_LED_100MACT		8
+/* Additional led states not in datasheet: */
+#define RT305X_ESW_LED_BLINK		10
+#define RT305X_ESW_LED_ON		12
+
+#define RT305X_ESW_LINK_S		25
+#define RT305X_ESW_DUPLEX_S		9
+#define RT305X_ESW_SPD_S		0
+
+#define RT305X_ESW_PCR0_WT_NWAY_DATA_S	16
+#define RT305X_ESW_PCR0_WT_PHY_CMD	BIT(13)
+#define RT305X_ESW_PCR0_CPU_PHY_REG_S	8
+
+#define RT305X_ESW_PCR1_WT_DONE		BIT(0)
+
+#define RT305X_ESW_ATS_TIMEOUT		(5 * HZ)
+#define RT305X_ESW_PHY_TIMEOUT		(5 * HZ)
+
+#define RT305X_ESW_PVIDC_PVID_M		0xfff
+#define RT305X_ESW_PVIDC_PVID_S		12
+
+#define RT305X_ESW_VLANI_VID_M		0xfff
+#define RT305X_ESW_VLANI_VID_S		12
+
+#define RT305X_ESW_VMSC_MSC_M		0xff
+#define RT305X_ESW_VMSC_MSC_S		8
+
+#define RT305X_ESW_SOCPC_DISUN2CPU_S	0
+#define RT305X_ESW_SOCPC_DISMC2CPU_S	8
+#define RT305X_ESW_SOCPC_DISBC2CPU_S	16
+#define RT305X_ESW_SOCPC_CRC_PADDING	BIT(25)
+
+#define RT305X_ESW_POC0_EN_BP_S		0
+#define RT305X_ESW_POC0_EN_FC_S		8
+#define RT305X_ESW_POC0_DIS_RMC2CPU_S	16
+#define RT305X_ESW_POC0_DIS_PORT_M	0x7f
+#define RT305X_ESW_POC0_DIS_PORT_S	23
+
+#define RT305X_ESW_POC2_UNTAG_EN_M	0xff
+#define RT305X_ESW_POC2_UNTAG_EN_S	0
+#define RT305X_ESW_POC2_ENAGING_S	8
+#define RT305X_ESW_POC2_DIS_UC_PAUSE_S	16
+
+#define RT305X_ESW_SGC2_DOUBLE_TAG_M	0x7f
+#define RT305X_ESW_SGC2_DOUBLE_TAG_S	0
+#define RT305X_ESW_SGC2_LAN_PMAP_M	0x3f
+#define RT305X_ESW_SGC2_LAN_PMAP_S	24
+
+#define RT305X_ESW_PFC1_EN_VLAN_M	0xff
+#define RT305X_ESW_PFC1_EN_VLAN_S	16
+#define RT305X_ESW_PFC1_EN_TOS_S	24
+
+#define RT305X_ESW_VLAN_NONE		0xfff
+
+#define RT305X_ESW_GSC_BC_STROM_MASK	0x3
+#define RT305X_ESW_GSC_BC_STROM_SHIFT	4
+
+#define RT305X_ESW_GSC_LED_FREQ_MASK	0x3
+#define RT305X_ESW_GSC_LED_FREQ_SHIFT	23
+
+#define RT305X_ESW_POA_LINK_MASK	0x1f
+#define RT305X_ESW_POA_LINK_SHIFT	25
+
+#define RT305X_ESW_PORT_ST_CHG		BIT(26)
+#define RT305X_ESW_PORT0		0
+#define RT305X_ESW_PORT1		1
+#define RT305X_ESW_PORT2		2
+#define RT305X_ESW_PORT3		3
+#define RT305X_ESW_PORT4		4
+#define RT305X_ESW_PORT5		5
+#define RT305X_ESW_PORT6		6
+
+#define RT305X_ESW_PMAP_LLLLLL		0x3f
+#define RT305X_ESW_PMAP_LLLLWL		0x2f
+#define RT305X_ESW_PMAP_WLLLLL		0x3e
+
+#define RT305X_ESW_PORTS_INTERNAL					\
+		(BIT(RT305X_ESW_PORT0) | BIT(RT305X_ESW_PORT1) |	\
+		 BIT(RT305X_ESW_PORT2) | BIT(RT305X_ESW_PORT3) |	\
+		 BIT(RT305X_ESW_PORT4))
+
+#define RT305X_ESW_PORTS_NOCPU						\
+		(RT305X_ESW_PORTS_INTERNAL | BIT(RT305X_ESW_PORT5))
+
+#define RT305X_ESW_PORTS_CPU	BIT(RT305X_ESW_PORT6)
+
+#define RT305X_ESW_PORTS_ALL						\
+		(RT305X_ESW_PORTS_NOCPU | RT305X_ESW_PORTS_CPU)
+
+#define RT305X_ESW_NUM_PORTS		7
+#define RT305X_ESW_NUM_LEDS		5
+
+#define RT5350_EWS_REG_LED_POLARITY	0x168
+#define RT5350_RESET_EPHY		BIT(24)
+
+struct esw_port {
+	bool	disable;
+	u8	led;
+};
+
+struct rt305x_esw {
+	struct device		*dev;
+	void __iomem		*base;
+	int			irq;
+
+	/* Protects against concurrent register r/w operations. */
+	spinlock_t		reg_rw_lock;
+
+	unsigned char		port_map;
+	unsigned int		reg_led_polarity;
+
+	struct esw_port ports[RT305X_ESW_NUM_PORTS];
+
+};
+
+static inline void esw_w32(struct rt305x_esw *esw, u32 val, unsigned reg)
+{
+	__raw_writel(val, esw->base + reg);
+}
+
+static inline u32 esw_r32(struct rt305x_esw *esw, unsigned reg)
+{
+	return __raw_readl(esw->base + reg);
+}
+
+static inline void esw_rmw_raw(struct rt305x_esw *esw, unsigned reg,
+			       unsigned long mask, unsigned long val)
+{
+	unsigned long t;
+
+	t = __raw_readl(esw->base + reg) & ~mask;
+	__raw_writel(t | val, esw->base + reg);
+}
+
+static void esw_rmw(struct rt305x_esw *esw, unsigned reg,
+		    unsigned long mask, unsigned long val)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&esw->reg_rw_lock, flags);
+	esw_rmw_raw(esw, reg, mask, val);
+	spin_unlock_irqrestore(&esw->reg_rw_lock, flags);
+}
+
+static u32 rt305x_mii_write(struct rt305x_esw *esw, u32 phy_addr,
+			    u32 phy_register, u32 write_data)
+{
+	unsigned long t_start = jiffies;
+	int ret = 0;
+
+	while (1) {
+		if (!(esw_r32(esw, RT305X_ESW_REG_PCR1) &
+		      RT305X_ESW_PCR1_WT_DONE))
+			break;
+		if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) {
+			ret = 1;
+			goto out;
+		}
+	}
+
+	write_data &= 0xffff;
+	esw_w32(esw, (write_data << RT305X_ESW_PCR0_WT_NWAY_DATA_S) |
+		      (phy_register << RT305X_ESW_PCR0_CPU_PHY_REG_S) |
+		      (phy_addr) | RT305X_ESW_PCR0_WT_PHY_CMD,
+		RT305X_ESW_REG_PCR0);
+
+	t_start = jiffies;
+	while (1) {
+		if (esw_r32(esw, RT305X_ESW_REG_PCR1) &
+			    RT305X_ESW_PCR1_WT_DONE)
+			break;
+
+		if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) {
+			ret = 1;
+			break;
+		}
+	}
+out:
+	if (ret)
+		dev_err(esw->dev, "ramips_eth: MDIO timeout\n");
+	return ret;
+}
+
+static unsigned esw_get_port_disable(struct rt305x_esw *esw)
+{
+	unsigned reg;
+
+	reg = esw_r32(esw, RT305X_ESW_REG_POC0);
+	return (reg >> RT305X_ESW_POC0_DIS_PORT_S) &
+	       RT305X_ESW_POC0_DIS_PORT_M;
+}
+
+static void esw_hw_init(struct rt305x_esw *esw)
+{
+	int i;
+	u8 port_disable = 0;
+	u8 port_map = RT305X_ESW_PMAP_LLLLLL;
+
+	/* vodoo from original driver */
+	esw_w32(esw, 0xC8A07850, RT305X_ESW_REG_FCT0);
+	esw_w32(esw, 0x00000000, RT305X_ESW_REG_SGC2);
+	/* Port priority 1 for all ports, vlan enabled. */
+	esw_w32(esw, 0x00005555 |
+		     (RT305X_ESW_PORTS_ALL << RT305X_ESW_PFC1_EN_VLAN_S),
+		RT305X_ESW_REG_PFC1);
+
+	/* Enable Back Pressure, and Flow Control */
+	esw_w32(esw, ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_BP_S) |
+		      (RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_FC_S)),
+		RT305X_ESW_REG_POC0);
+
+	/* Enable Aging, and VLAN TAG removal */
+	esw_w32(esw, ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC2_ENAGING_S) |
+		      (RT305X_ESW_PORTS_NOCPU << RT305X_ESW_POC2_UNTAG_EN_S)),
+		RT305X_ESW_REG_POC2);
+
+	esw_w32(esw, 0x00d6500c, RT305X_ESW_REG_FCT2);
+
+	/* 300s aging timer, max packet len 1536, broadcast storm prevention
+	 * disabled, disable collision abort, mac xor48 hash, 10 packet back
+	 * pressure jam, GMII disable was_transmit, back pressure disabled,
+	 * 30ms led flash, unmatched IGMP as broadcast, rmc tb fault to all
+	 * ports.
+	 */
+	esw_w32(esw, 0x0008a301, RT305X_ESW_REG_SGC);
+
+	/* Setup SoC Port control register */
+	esw_w32(esw,
+		(RT305X_ESW_SOCPC_CRC_PADDING |
+		(RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISUN2CPU_S) |
+		(RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISMC2CPU_S) |
+		(RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISBC2CPU_S)),
+		RT305X_ESW_REG_SOCPC);
+
+	/* ext phy base addr 31, enable port 5 polling, rx/tx clock skew 1,
+	 * turbo mii off, rgmi 3.3v off
+	 * port5: disabled
+	 * port6: enabled, gige, full-duplex, rx/tx-flow-control
+	 */
+	esw_w32(esw, 0x3f502b28, RT305X_ESW_REG_FPA2);
+	esw_w32(esw, 0x00000000, RT305X_ESW_REG_FPA);
+
+	/* Force Link/Activity on ports */
+	esw_w32(esw, 0x00000005, RT305X_ESW_REG_P0LED);
+	esw_w32(esw, 0x00000005, RT305X_ESW_REG_P1LED);
+	esw_w32(esw, 0x00000005, RT305X_ESW_REG_P2LED);
+	esw_w32(esw, 0x00000005, RT305X_ESW_REG_P3LED);
+	esw_w32(esw, 0x00000005, RT305X_ESW_REG_P4LED);
+
+	/* Copy disabled port configuration from bootloader setup */
+	port_disable = esw_get_port_disable(esw);
+	for (i = 0; i < 6; i++)
+		esw->ports[i].disable = (port_disable & (1 << i)) != 0;
+
+	if (ralink_soc == RT305X_SOC_RT3352) {
+		/* reset EPHY */
+		fe_reset(RT5350_RESET_EPHY);
+
+		rt305x_mii_write(esw, 0, 31, 0x8000);
+		for (i = 0; i < 5; i++) {
+			if (esw->ports[i].disable) {
+				rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
+			} else {
+				rt305x_mii_write(esw, i, MII_BMCR,
+						 BMCR_FULLDPLX |
+						 BMCR_ANENABLE |
+						 BMCR_SPEED100);
+			}
+			/* TX10 waveform coefficient LSB=0 disable PHY */
+			rt305x_mii_write(esw, i, 26, 0x1601);
+			/* TX100/TX10 AD/DA current bias */
+			rt305x_mii_write(esw, i, 29, 0x7016);
+			/* TX100 slew rate control */
+			rt305x_mii_write(esw, i, 30, 0x0038);
+		}
+
+		/* select global register */
+		rt305x_mii_write(esw, 0, 31, 0x0);
+		/* enlarge agcsel threshold 3 and threshold 2 */
+		rt305x_mii_write(esw, 0, 1, 0x4a40);
+		/* enlarge agcsel threshold 5 and threshold 4 */
+		rt305x_mii_write(esw, 0, 2, 0x6254);
+		/* enlarge agcsel threshold  */
+		rt305x_mii_write(esw, 0, 3, 0xa17f);
+		rt305x_mii_write(esw, 0, 12, 0x7eaa);
+		/* longer TP_IDL tail length */
+		rt305x_mii_write(esw, 0, 14, 0x65);
+		/* increased squelch pulse count threshold. */
+		rt305x_mii_write(esw, 0, 16, 0x0684);
+		/* set TX10 signal amplitude threshold to minimum */
+		rt305x_mii_write(esw, 0, 17, 0x0fe0);
+		/* set squelch amplitude to higher threshold */
+		rt305x_mii_write(esw, 0, 18, 0x40ba);
+		/* tune TP_IDL tail and head waveform, enable power
+		 * down slew rate control
+		 */
+		rt305x_mii_write(esw, 0, 22, 0x253f);
+		/* set PLL/Receive bias current are calibrated */
+		rt305x_mii_write(esw, 0, 27, 0x2fda);
+		/* change PLL/Receive bias current to internal(RT3350) */
+		rt305x_mii_write(esw, 0, 28, 0xc410);
+		/* change PLL bias current to internal(RT3052_MP3) */
+		rt305x_mii_write(esw, 0, 29, 0x598b);
+		/* select local register */
+		rt305x_mii_write(esw, 0, 31, 0x8000);
+	} else if (ralink_soc == RT305X_SOC_RT5350) {
+		/* reset EPHY */
+		fe_reset(RT5350_RESET_EPHY);
+
+		/* set the led polarity */
+		esw_w32(esw, esw->reg_led_polarity & 0x1F,
+			RT5350_EWS_REG_LED_POLARITY);
+
+		/* local registers */
+		rt305x_mii_write(esw, 0, 31, 0x8000);
+		for (i = 0; i < 5; i++) {
+			if (esw->ports[i].disable) {
+				rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
+			} else {
+				rt305x_mii_write(esw, i, MII_BMCR,
+						 BMCR_FULLDPLX |
+						 BMCR_ANENABLE |
+						 BMCR_SPEED100);
+			}
+			/* TX10 waveform coefficient LSB=0 disable PHY */
+			rt305x_mii_write(esw, i, 26, 0x1601);
+			/* TX100/TX10 AD/DA current bias */
+			rt305x_mii_write(esw, i, 29, 0x7015);
+			/* TX100 slew rate control */
+			rt305x_mii_write(esw, i, 30, 0x0038);
+		}
+
+		/* global registers */
+		rt305x_mii_write(esw, 0, 31, 0x0);
+		/* enlarge agcsel threshold 3 and threshold 2 */
+		rt305x_mii_write(esw, 0, 1, 0x4a40);
+		/* enlarge agcsel threshold 5 and threshold 4 */
+		rt305x_mii_write(esw, 0, 2, 0x6254);
+		/* enlarge agcsel threshold 6 */
+		rt305x_mii_write(esw, 0, 3, 0xa17f);
+		rt305x_mii_write(esw, 0, 12, 0x7eaa);
+		/* longer TP_IDL tail length */
+		rt305x_mii_write(esw, 0, 14, 0x65);
+		/* increased squelch pulse count threshold. */
+		rt305x_mii_write(esw, 0, 16, 0x0684);
+		/* set TX10 signal amplitude threshold to minimum */
+		rt305x_mii_write(esw, 0, 17, 0x0fe0);
+		/* set squelch amplitude to higher threshold */
+		rt305x_mii_write(esw, 0, 18, 0x40ba);
+		/* tune TP_IDL tail and head waveform, enable power
+		 * down slew rate control
+		 */
+		rt305x_mii_write(esw, 0, 22, 0x253f);
+		/* set PLL/Receive bias current are calibrated */
+		rt305x_mii_write(esw, 0, 27, 0x2fda);
+		/* change PLL/Receive bias current to internal(RT3350) */
+		rt305x_mii_write(esw, 0, 28, 0xc410);
+		/* change PLL bias current to internal(RT3052_MP3) */
+		rt305x_mii_write(esw, 0, 29, 0x598b);
+		/* select local register */
+		rt305x_mii_write(esw, 0, 31, 0x8000);
+	} else if (ralink_soc == MT762X_SOC_MT7628AN || ralink_soc == MT762X_SOC_MT7688) {
+		int i;
+
+		/* reset EPHY */
+		fe_reset(RT5350_RESET_EPHY);
+
+		rt305x_mii_write(esw, 0, 31, 0x2000); /* change G2 page */
+		rt305x_mii_write(esw, 0, 26, 0x0020);
+
+		for (i = 0; i < 5; i++) {
+			rt305x_mii_write(esw, i, 31, 0x8000);
+			rt305x_mii_write(esw, i,  0, 0x3100);
+			rt305x_mii_write(esw, i, 30, 0xa000);
+			rt305x_mii_write(esw, i, 31, 0xa000);
+			rt305x_mii_write(esw, i, 16, 0x0606);
+			rt305x_mii_write(esw, i, 23, 0x0f0e);
+			rt305x_mii_write(esw, i, 24, 0x1610);
+			rt305x_mii_write(esw, i, 30, 0x1f15);
+			rt305x_mii_write(esw, i, 28, 0x6111);
+			rt305x_mii_write(esw, i, 31, 0x2000);
+			rt305x_mii_write(esw, i, 26, 0x0000);
+		}
+
+		/* 100Base AOI setting */
+		rt305x_mii_write(esw, 0, 31, 0x5000);
+		rt305x_mii_write(esw, 0, 19, 0x004a);
+		rt305x_mii_write(esw, 0, 20, 0x015a);
+		rt305x_mii_write(esw, 0, 21, 0x00ee);
+		rt305x_mii_write(esw, 0, 22, 0x0033);
+		rt305x_mii_write(esw, 0, 23, 0x020a);
+		rt305x_mii_write(esw, 0, 24, 0x0000);
+		rt305x_mii_write(esw, 0, 25, 0x024a);
+		rt305x_mii_write(esw, 0, 26, 0x035a);
+		rt305x_mii_write(esw, 0, 27, 0x02ee);
+		rt305x_mii_write(esw, 0, 28, 0x0233);
+		rt305x_mii_write(esw, 0, 29, 0x000a);
+		rt305x_mii_write(esw, 0, 30, 0x0000);
+	} else {
+		rt305x_mii_write(esw, 0, 31, 0x8000);
+		for (i = 0; i < 5; i++) {
+			if (esw->ports[i].disable) {
+				rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
+			} else {
+				rt305x_mii_write(esw, i, MII_BMCR,
+						 BMCR_FULLDPLX |
+						 BMCR_ANENABLE |
+						 BMCR_SPEED100);
+			}
+			/* TX10 waveform coefficient */
+			rt305x_mii_write(esw, i, 26, 0x1601);
+			/* TX100/TX10 AD/DA current bias */
+			rt305x_mii_write(esw, i, 29, 0x7058);
+			/* TX100 slew rate control */
+			rt305x_mii_write(esw, i, 30, 0x0018);
+		}
+
+		/* PHY IOT */
+		/* select global register */
+		rt305x_mii_write(esw, 0, 31, 0x0);
+		/* tune TP_IDL tail and head waveform */
+		rt305x_mii_write(esw, 0, 22, 0x052f);
+		/* set TX10 signal amplitude threshold to minimum */
+		rt305x_mii_write(esw, 0, 17, 0x0fe0);
+		/* set squelch amplitude to higher threshold */
+		rt305x_mii_write(esw, 0, 18, 0x40ba);
+		/* longer TP_IDL tail length */
+		rt305x_mii_write(esw, 0, 14, 0x65);
+		/* select local register */
+		rt305x_mii_write(esw, 0, 31, 0x8000);
+	}
+
+	if (esw->port_map)
+		port_map = esw->port_map;
+	else
+		port_map = RT305X_ESW_PMAP_LLLLLL;
+
+	/* Unused HW feature, but still nice to be consistent here...
+	 * This is also exported to userspace ('lan' attribute) so it's
+	 * conveniently usable to decide which ports go into the wan vlan by
+	 * default.
+	 */
+	esw_rmw(esw, RT305X_ESW_REG_SGC2,
+		RT305X_ESW_SGC2_LAN_PMAP_M << RT305X_ESW_SGC2_LAN_PMAP_S,
+		port_map << RT305X_ESW_SGC2_LAN_PMAP_S);
+
+	/* make the switch leds blink */
+	for (i = 0; i < RT305X_ESW_NUM_LEDS; i++)
+		esw->ports[i].led = 0x05;
+
+	/* Only unmask the port change interrupt */
+	esw_w32(esw, ~RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_IMR);
+}
+
+static irqreturn_t esw_interrupt(int irq, void *_esw)
+{
+	struct rt305x_esw *esw = (struct rt305x_esw *)_esw;
+	u32 status;
+
+	status = esw_r32(esw, RT305X_ESW_REG_ISR);
+	if (status & RT305X_ESW_PORT_ST_CHG) {
+		u32 link = esw_r32(esw, RT305X_ESW_REG_POA);
+
+		link >>= RT305X_ESW_POA_LINK_SHIFT;
+		link &= RT305X_ESW_POA_LINK_MASK;
+		dev_info(esw->dev, "link changed 0x%02X\n", link);
+	}
+	esw_w32(esw, status, RT305X_ESW_REG_ISR);
+
+	return IRQ_HANDLED;
+}
+
+static int esw_probe(struct platform_device *pdev)
+{
+	struct resource *res = platform_get_resource(p, IORESOURCE_MEM, 0);
+	struct device_node *np = pdev->dev.of_node;
+	const __be32 *port_map, *reg_init;
+	struct rt305x_esw *esw;
+	struct resource *irq;
+	int ret;
+
+	esw = devm_kzalloc(&pdev->dev, sizeof(*esw), GFP_KERNEL);
+	if (!esw)
+		return -ENOMEM;
+
+	esw->dev = &pdev->dev;
+	esw->irq = irq->start;
+	esw->base = devm_ioremap_resource(&pdev->dev, res);
+	if (!esw->base)
+		return -EADDRNOTAVAIL;
+
+	port_map = of_get_property(np, "mediatek,portmap", NULL);
+	if (port_map)
+		esw->port_map = be32_to_cpu(*port_map);
+
+	reg_init = of_get_property(np, "mediatek,led_polarity", NULL);
+	if (reg_init)
+		esw->reg_led_polarity = be32_to_cpu(*reg_init);
+
+	platform_set_drvdata(pdev, esw);
+
+	spin_lock_init(&esw->reg_rw_lock);
+
+	esw_hw_init(esw);
+
+	ret = devm_request_irq(&pdev->dev, esw->irq, esw_interrupt, 0, "esw",
+			       esw);
+
+	if (!ret) {
+		esw_w32(esw, RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_ISR);
+		esw_w32(esw, ~RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_IMR);
+	}
+
+	return ret;
+}
+
+static int esw_remove(struct platform_device *pdev)
+{
+	struct rt305x_esw *esw = platform_get_drvdata(pdev);
+
+	if (esw) {
+		esw_w32(esw, ~0, RT305X_ESW_REG_IMR);
+		platform_set_drvdata(pdev, NULL);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id ralink_esw_match[] = {
+	{ .compatible = "ralink,rt3050-esw" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ralink_esw_match);
+
+static struct platform_driver esw_driver = {
+	.probe = esw_probe,
+	.remove = esw_remove,
+	.driver = {
+		.name = "rt3050-esw",
+		.owner = THIS_MODULE,
+		.of_match_table = ralink_esw_match,
+	},
+};
+
+int __init mtk_switch_init(void)
+{
+	return platform_driver_register(&esw_driver);
+}
+
+void mtk_switch_exit(void)
+{
+	platform_driver_unregister(&esw_driver);
+}
--- /dev/null
+++ b/drivers/net/ethernet/mediatek/esw_rt3050.h
@@ -0,0 +1,29 @@
+/*   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; version 2 of the License
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
+ *   Copyright (C) 2009-2015 Felix Fietkau <nbd@nbd.name>
+ *   Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
+ */
+
+#ifndef _RALINK_ESW_RT3052_H__
+#define _RALINK_ESW_RT3052_H__
+
+#ifdef CONFIG_NET_MEDIATEK_ESW_RT3052
+
+int __init mtk_switch_init(void);
+void mtk_switch_exit(void);
+
+#else
+
+static inline int __init mtk_switch_init(void) { return 0; }
+static inline void mtk_switch_exit(void) { }
+
+#endif
+#endif