diff options
Diffstat (limited to 'doc-src/tutorials/transparent-dhcp.html')
| -rw-r--r-- | doc-src/tutorials/transparent-dhcp.html | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/doc-src/tutorials/transparent-dhcp.html b/doc-src/tutorials/transparent-dhcp.html index e0148afa..ce8a10fd 100644 --- a/doc-src/tutorials/transparent-dhcp.html +++ b/doc-src/tutorials/transparent-dhcp.html @@ -4,10 +4,10 @@ This walkthrough illustrates how to set up transparent proxying with mitmproxy. The network setup is simple: `internet <--> proxy vm <--> (virtual) internal network`. For the proxy machine, *eth0* represents the outgoing network. *eth1* is connected to the internal network that will be proxified, using a static ip (192.168.3.1). <hr>VirtualBox configuration: - <img src="@!urlTo("tutorials/transparent-dhcp/step1_vbox_eth0.png")!@"/><br><br> - <img src="@!urlTo("tutorials/transparent-dhcp/step1_vbox_eth1.png")!@"/> + <img src="@!urlTo('tutorials/transparent-dhcp/step1_vbox_eth0.png')!@"/><br><br> + <img src="@!urlTo('tutorials/transparent-dhcp/step1_vbox_eth1.png')!@"/> <br>Proxy VM: - <img src="@!urlTo("tutorials/transparent-dhcp/step1_proxy.png")!@"/> + <img src="@!urlTo('tutorials/transparent-dhcp/step1_proxy.png')!@"/> <hr> 2. **Configure DHCP and DNS** We use dnsmasq to provide DHCP and DNS in our internal network. @@ -34,7 +34,7 @@ This walkthrough illustrates how to set up transparent proxying with mitmproxy. `sudo service dnsmasq restart` <hr> Your proxied machine's network settings should now look similar to this: - <img src="@!urlTo("tutorials/transparent-dhcp/step2_proxied_vm.png")!@"/> + <img src="@!urlTo('tutorials/transparent-dhcp/step2_proxied_vm.png')!@"/> <hr> 3. **Set up traffic redirection to mitmproxy** @@ -46,7 +46,7 @@ This walkthrough illustrates how to set up transparent proxying with mitmproxy. -j REDIRECT --to-port 8080 </pre> -4. If required, <a href="@!urlTo("ssl.html")!@">install the mitmproxy +4. If required, <a href="@!urlTo('ssl.html')!@">install the mitmproxy certificates on the test device</a>. 5. Finally, we can run <code>mitmproxy -T</code>. |