1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
|
/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
/**
* @file boards/base/Mikromedia-STM32-M4-ILI9341/ginput_lld_mouse_board.h
* @brief GINPUT Touch low level driver source for the MCU.
*/
#ifndef _GINPUT_LLD_MOUSE_BOARD_H
#define _GINPUT_LLD_MOUSE_BOARD_H
#define ADC_NUM_CHANNELS 2
#define ADC_BUF_DEPTH 1
static const ADCConversionGroup adcgrpcfg = {
FALSE,
ADC_NUM_CHANNELS,
0,
0,
/* HW dependent part.*/
0,
ADC_CR2_SWSTART,
0,
0,
ADC_SQR1_NUM_CH(ADC_NUM_CHANNELS),
0,
ADC_SQR3_SQ2_N(ADC_CHANNEL_IN8) | ADC_SQR3_SQ1_N(ADC_CHANNEL_IN9)
};
/**
* @brief Initialise the board for the touch.
*
* @notapi
*/
static inline void init_board(void) {
adcStart(&ADCD1, 0);
}
/**
* @brief Aquire the bus ready for readings
*
* @notapi
*/
static inline void aquire_bus(void) {
}
/**
* @brief Release the bus after readings
*
* @notapi
*/
static inline void release_bus(void) {
}
static inline void setup_x(void) {
palSetPad(GPIOB, GPIOB_DRIVEA);
palClearPad(GPIOB, GPIOB_DRIVEB);
chThdSleepMilliseconds(2);
}
static inline void setup_y(void) {
palClearPad(GPIOB, GPIOB_DRIVEA);
palSetPad(GPIOB, GPIOB_DRIVEB);
chThdSleepMilliseconds(2);
}
static inline void setup_z(void) {
palClearPad(GPIOB, GPIOB_DRIVEA);
palClearPad(GPIOB, GPIOB_DRIVEB);
chThdSleepMilliseconds(2);
}
static inline uint16_t read_x(void) {
adcsample_t samples[ADC_NUM_CHANNELS * ADC_BUF_DEPTH];
adcConvert(&ADCD1, &adcgrpcfg, samples, ADC_BUF_DEPTH);
return samples[1];
}
static inline uint16_t read_y(void) {
adcsample_t samples[ADC_NUM_CHANNELS * ADC_BUF_DEPTH];
adcConvert(&ADCD1, &adcgrpcfg, samples, ADC_BUF_DEPTH);
return samples[0];
}
static inline uint16_t read_z(void) {
adcsample_t samples[ADC_NUM_CHANNELS * ADC_BUF_DEPTH];
adcConvert(&ADCD1, &adcgrpcfg, samples, ADC_BUF_DEPTH);
// z will go from ~200 to ~4000 when pressed
// auto range this back to 0 to 100
if (samples[0] > 4000)
return 100;
if (samples[0] < 400)
return 0;
return (samples[0] - 400) / ((4000-400)/100);
}
#endif /* _GINPUT_LLD_MOUSE_BOARD_H */
|
