1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
|
/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
#ifndef _GDISP_LLD_BOARD_H
#define _GDISP_LLD_BOARD_H
static const LCD_Parameters DisplayTimings[] = {
// You need one of these array elements per display
{
480, 272, // Panel width and height
2, 2, 41, // Horizontal Timings (back porch, front porch, pulse)
CALC_PERIOD(480,2,2,41), // Total Horizontal Period (calculated from above line)
2, 2, 10, // Vertical Timings (back porch, front porch, pulse)
CALC_PERIOD(272,2,2,10), // Total Vertical Period (calculated from above line)
CALC_FPR(480,272,2,2,41,2,2,10,73ULL), // FPR - the 60ULL is the frames per second. Note the ULL!
LCD_PANEL_DATA_WIDTH_24BIT | LCD_PANEL_ENABLE_DITHERING
},
};
/* GPIO Pin Config */
#define GDISP_CMD_PORT GPIOF
#define GDISP_DATA_LO_PORT GPIOG
#define GDISP_DATA_HI_PORT GPIOE
#define GDISP_WR 11
#define GDISP_RD 12
#define GDISP_CS 13
#define GDISP_RST 14
#define GDISP_DC 15
#define SET_CS palSetPad(GDISP_CMD_PORT, GDISP_CS);
#define CLR_CS palClearPad(GDISP_CMD_PORT, GDISP_CS);
#define SET_RST palSetPad(GDISP_CMD_PORT, GDISP_RST);
#define CLR_RST palClearPad(GDISP_CMD_PORT, GDISP_RST);
#define SET_WR palSetPad(GDISP_CMD_PORT, GDISP_WR);
#define CLR_WR palClearPad(GDISP_CMD_PORT, GDISP_WR);
#define SET_RD palSetPad(GDISP_CMD_PORT, GDISP_RD);
#define CLR_RD palClearPad(GDISP_CMD_PORT, GDISP_RD);
#define SET_DC palSetPad(GDISP_CMD_PORT, GDISP_DC);
#define CLR_DC palClearPad(GDISP_CMD_PORT, GDISP_DC);
#define writeStrobe { CLR_WR; /*asm volatile ("nop;");*/ SET_WR; }
IOBus busCMD = { GDISP_CMD_PORT, (1 << GDISP_CS) | (1 << GDISP_RST) | (1 << GDISP_WR) | (1 << GDISP_RD) | (1 << GDISP_DC), 11 };
IOBus busDataLo = { GDISP_DATA_LO_PORT, 0xFF, 0 };
IOBus busDataHi = { GDISP_DATA_HI_PORT, 0xFF, 8 };
static GFXINLINE void init_board(GDisplay *g) {
g->board = 0;
switch(g->controllerdisplay) {
case 0:
palSetBusMode(&busCMD, PAL_MODE_OUTPUT_PUSHPULL);
palSetBusMode(&busDataLo, PAL_MODE_OUTPUT_PUSHPULL);
palSetBusMode(&busDataHi, PAL_MODE_OUTPUT_PUSHPULL);
SET_CS; SET_WR; SET_RD; SET_DC; SET_RST;
break;
default:
break;
}
}
static GFXINLINE void post_init_board(GDisplay *g) {
(void) g;
}
static GFXINLINE void setpin_reset(GDisplay *g, gBool state) {
(void) g;
if (state) {
CLR_RST;
} else {
SET_RST;
}
}
static GFXINLINE void acquire_bus(GDisplay *g) {
(void) g;
CLR_CS;
}
static GFXINLINE void release_bus(GDisplay *g) {
(void) g;
SET_CS;
}
static GFXINLINE void write_index(GDisplay *g, uint16_t index) {
(void) g;
CLR_DC;
palWriteBus(&busDataLo, (index & 0xFF));
palWriteBus(&busDataHi, (index >> 8));
writeStrobe;
SET_DC;
}
static GFXINLINE void write_data(GDisplay *g, uint16_t data) {
(void) g;
palWriteBus(&busDataLo, (data & 0xFF));
palWriteBus(&busDataHi, (data >> 8));
writeStrobe;
}
static GFXINLINE void setreadmode(GDisplay *g) {
(void) g;
palSetBusMode(&busDataLo, PAL_MODE_INPUT_PULLUP);
palSetBusMode(&busDataHi, PAL_MODE_INPUT_PULLUP);
}
static GFXINLINE void setwritemode(GDisplay *g) {
(void) g;
palSetBusMode(&busDataLo, PAL_MODE_OUTPUT_PUSHPULL);
palSetBusMode(&busDataHi, PAL_MODE_OUTPUT_PUSHPULL);
}
static GFXINLINE uint16_t read_data(GDisplay *g) {
uint16_t data;
(void) g;
CLR_RD;
data = (palReadBus(&busDataHi) << 8) | palReadBus(&busDataLo);
SET_RD;
return data;
}
#endif /* _GDISP_LLD_BOARD_H */
|
