1 files changed, 60 insertions, 0 deletions
diff --git a/drivers/ginput/touch/STMPE811/gmouse_lld_STMPE811_board_template.h b/drivers/ginput/touch/STMPE811/gmouse_lld_STMPE811_board_template.h
new file mode 100644
index 00000000..4520cf67
--- /dev/null
+++ b/drivers/ginput/touch/STMPE811/gmouse_lld_STMPE811_board_template.h
@@ -0,0 +1,60 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#ifndef _GINPUT_LLD_MOUSE_BOARD_H
+#define _GINPUT_LLD_MOUSE_BOARD_H
+
+// Resolution and Accuracy Settings
+#define GMOUSE_STMPE811_PEN_CALIBRATE_ERROR		8
+#define GMOUSE_STMPE811_PEN_CLICK_ERROR			6
+#define GMOUSE_STMPE811_PEN_MOVE_ERROR			4
+#define GMOUSE_STMPE811_FINGER_CALIBRATE_ERROR	14
+#define GMOUSE_STMPE811_FINGER_CLICK_ERROR		18
+#define GMOUSE_STMPE811_FINGER_MOVE_ERROR		14
+
+// How much extra data to allocate at the end of the GMouse structure for the board's use
+#define GMOUSE_STMPE811_BOARD_DATA_SIZE			0
+
+// Options - Leave these commented to make it user configurable in the gfxconf.h
+//#define GMOUSE_STMPE811_READ_PRESSURE		FALSE
+//#define GMOUSE_STMPE811_SELF_CALIBRATE	FALSE
+//#define GMOUSE_STMPE811_TEST_MODE			FALSE
+
+// If TRUE this board has the STMPE811 IRQ pin connected to a GPIO.
+// Note: For tested hardware this is unreliable and should be set to FALSE until tested.
+//			Symptoms are that mouse readings just appear to stop for a bit. Lifting the touch
+//			and re-applying the touch cause readings to start again.
+#define GMOUSE_STMPE811_GPIO_IRQPIN				FALSE
+
+// If TRUE this is a really slow CPU and we should always clear the FIFO between reads.
+#define GMOUSE_STMPE811_SLOW_CPU				FALSE
+
+static bool_t init_board(GMouse* m, unsigned driverinstance) {
+}
+
+#if GMOUSE_STMPE811_GPIO_IRQPIN
+	static bool_t getpin_irq(GMouse* m) {
+
+	}
+#endif
+
+static inline void aquire_bus(GMouse* m) {
+}
+
+static inline void release_bus(GMouse* m) {
+}
+
+static void write_reg(GMouse* m, uint8_t reg, uint8_t val) {
+}
+
+static uint8_t read_byte(GMouse* m, uint8_t reg) {
+}
+
+static uint16_t read_word(GMouse* m, uint8_t reg) {
+}
+
+#endif /* _GINPUT_LLD_MOUSE_BOARD_H */