1 files changed, 0 insertions, 82 deletions
diff --git a/drivers/gdisp/ST7565/gdisp_lld_board_template.h b/drivers/gdisp/ST7565/gdisp_lld_board_template.h
deleted file mode 100644
index 2f40ccc7..00000000
--- a/drivers/gdisp/ST7565/gdisp_lld_board_template.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-/**
- * @brief   Initialize the board for the display.
- * @notes	This board definition uses GPIO and assumes exclusive access to these GPIO pins
- * @notapi
- */
-static inline void init_board(void) {
-  /* Configure SPI bus here. Up to 10Mhz, SPI Mode = 3 (CPOL = 1, CPHA = 0) */
-  /* Configure A0, !CS, !RST pin for output */
-}
-
-/**
- * @brief   Set or clear the lcd reset pin.
- * @param[in] state		TRUE = lcd in reset, FALSE = normal operation
- * @notapi
- */
-static inline void setpin_reset(bool_t state) {
-  /* Set !CS to low */
-  if (state) {
-    /* Set !RST to low */
-  } else {
-    /* Set !RST to high */
-  }
-}
-
-/**
- * @brief   Set the lcd back-light level.
- * @param[in] percent		0 to 100%
- * @notapi
- */
-static inline void set_backlight(uint8_t percent) {
-
-}
-
-/**
- * @brief   Take exclusive control of the bus
- * @notapi
- */
-static inline void acquire_bus(void) {
-
-}
-
-/**
- * @brief   Release exclusive control of the bus
- * @notapi
- */
-static inline void release_bus(void) {
-
-}
-
-/**
- * @brief   Send command to the display.
- * @param[in] cmd	The command to send
- * @notapi
- */
-static inline void write_cmd(uint8_t cmd) {
-  /* Set A0 to low */
-  /* Transmit cmd over SPI */
-}
-
-/**
- * @brief   Send data to the display.
- * @param[in] data	The data to send
- * @notapi
- */
-static inline void write_data(uint8_t* data, uint16_t length) {
-  /* Set A0 to high */
-  /* Transmit data for length over SPI. DMA is recommended. */
-}
-
-#endif /* _GDISP_LLD_BOARD_H */
-/** @} */
-