diff options
Diffstat (limited to 'drivers/gdisp/Nokia6610GE12')
| -rw-r--r-- | drivers/gdisp/Nokia6610GE12/GE12.h | 81 | ||||
| -rw-r--r-- | drivers/gdisp/Nokia6610GE12/gdisp_lld.c | 528 | ||||
| -rw-r--r-- | drivers/gdisp/Nokia6610GE12/gdisp_lld.mk | 5 | ||||
| -rw-r--r-- | drivers/gdisp/Nokia6610GE12/gdisp_lld_board_example.h | 135 | ||||
| -rw-r--r-- | drivers/gdisp/Nokia6610GE12/gdisp_lld_board_olimexsam7ex256.h | 196 | ||||
| -rw-r--r-- | drivers/gdisp/Nokia6610GE12/gdisp_lld_config.h | 58 | ||||
| -rw-r--r-- | drivers/gdisp/Nokia6610GE12/readme.txt | 15 |
7 files changed, 0 insertions, 1018 deletions
diff --git a/drivers/gdisp/Nokia6610GE12/GE12.h b/drivers/gdisp/Nokia6610GE12/GE12.h deleted file mode 100644 index 6c980e2e..00000000 --- a/drivers/gdisp/Nokia6610GE12/GE12.h +++ /dev/null @@ -1,81 +0,0 @@ -/*
- ChibiOS/GFX - Copyright (C) 2012
- Joel Bodenmann aka Tectu <joel@unormal.org>
-
- This file is part of ChibiOS/GFX.
-
- ChibiOS/GFX is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/GFX is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef GE12_H
-#define GE12_H
-
-// *************************************************************************************
-// LCD Include File for Philips PCF8833 STN RGB- 132x132x3 Driver (GE12)
-//
-// Taken from Philips data sheet Feb 14, 2003
-// *************************************************************************************
-
-// Philips PCF8833 LCD controller command codes
-#define NOP 0x00 // nop
-#define SWRESET 0x01 // software reset
-#define BSTROFF 0x02 // booster voltage OFF
-#define BSTRON 0x03 // booster voltage ON
-#define RDDIDIF 0x04 // read display identification
-#define RDDST 0x09 // read display status
-#define SLEEPIN 0x10 // sleep in
-#define SLEEPOUT 0x11 // sleep out
-#define PTLON 0x12 // partial display mode
-#define NORON 0x13 // display normal mode
-#define INVOFF 0x20 // inversion OFF
-#define INVON 0x21 // inversion ON
-#define DALO 0x22 // all pixel OFF
-#define DAL 0x23 // all pixel ON
-#define SETCON 0x25 // write contrast
-#define DISPOFF 0x28 // display OFF
-#define DISPON 0x29 // display ON
-#define CASET 0x2A // column address set
-#define PASET 0x2B // page address set
-#define RAMWR 0x2C // memory write
-#define RGBSET 0x2D // colour set
-#define PTLAR 0x30 // partial area
-#define VSCRDEF 0x33 // vertical scrolling definition
-#define TEOFF 0x34 // test mode
-#define TEON 0x35 // test mode
-#define MADCTL 0x36 // memory access control
-#define SEP 0x37 // vertical scrolling start address
-#define IDMOFF 0x38 // idle mode OFF
-#define IDMON 0x39 // idle mode ON
-#define COLMOD 0x3A // interface pixel format
-#define SETVOP 0xB0 // set Vop
-#define BRS 0xB4 // bottom row swap
-#define TRS 0xB6 // top row swap
-#define DISCTR 0xB9 // display control
-#define DOR 0xBA // data order
-#define TCDFE 0xBD // enable/disable DF temperature compensation
-#define TCVOPE 0xBF // enable/disable Vop temp comp
-#define EC 0xC0 // internal or external oscillator
-#define SETMUL 0xC2 // set multiplication factor
-#define TCVOPAB 0xC3 // set TCVOP slopes A and B
-#define TCVOPCD 0xC4 // set TCVOP slopes c and d
-#define TCDF 0xC5 // set divider frequency
-#define DF8COLOR 0xC6 // set divider frequency 8-color mode
-#define SETBS 0xC7 // set bias system
-#define RDTEMP 0xC8 // temperature read back
-#define NLI 0xC9 // n-line inversion
-#define RDID1 0xDA // read ID1
-#define RDID2 0xDB // read ID2
-#define RDID3 0xDC // read ID3
-
-#endif /* GE12_H */
diff --git a/drivers/gdisp/Nokia6610GE12/gdisp_lld.c b/drivers/gdisp/Nokia6610GE12/gdisp_lld.c deleted file mode 100644 index 7e5e1215..00000000 --- a/drivers/gdisp/Nokia6610GE12/gdisp_lld.c +++ /dev/null @@ -1,528 +0,0 @@ -/*
- ChibiOS/GFX - Copyright (C) 2012
- Joel Bodenmann aka Tectu <joel@unormal.org>
-
- This file is part of ChibiOS/GFX.
-
- ChibiOS/GFX is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/GFX is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @file drivers/gdisp/Nokia6610GE12/gdisp_lld.c
- * @brief GDISP Graphics Driver subsystem low level driver source for the Nokia6610 GE12 display.
- *
- * @addtogroup GDISP
- * @{
- */
-
-#include "ch.h"
-#include "hal.h"
-#include "gfx.h"
-
-#if GFX_USE_GDISP /*|| defined(__DOXYGEN__)*/
-
-/* Include the emulation code for things we don't support */
-#include "gdisp/lld/emulation.c"
-
-/*===========================================================================*/
-/* Driver local definitions. */
-/*===========================================================================*/
-
-/* Controller definitions */
-#include "GE12.h"
-
-/* This controller is only ever used with a 132 x 132 display */
-#if defined(GDISP_SCREEN_HEIGHT)
- #warning "GDISP: This low level driver does not support setting a screen size. It is being ignored."
- #undef GDISP_SCREEN_HEIGHT
-#endif
-#if defined(GDISP_SCREEN_WIDTH)
- #warning "GDISP: This low level driver does not support setting a screen size. It is being ignored."
- #undef GDISP_SCREEN_WIDTH
-#endif
-#define GDISP_SCREEN_HEIGHT 132
-#define GDISP_SCREEN_WIDTH 132
-
-#define GDISP_INITIAL_CONTRAST 38
-#define GDISP_INITIAL_BACKLIGHT 100
-
-/*===========================================================================*/
-/* Driver exported variables. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local variables. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-#if defined(GDISP_USE_CUSTOM_BOARD) && GDISP_USE_CUSTOM_BOARD
- /* Include the user supplied board definitions */
- #include "gdisp_lld_board.h"
-#elif defined(BOARD_OLIMEX_SAM7_EX256)
- #include "gdisp_lld_board_olimexsam7ex256.h"
-#else
- /* Include the user supplied board definitions */
- #include "gdisp_lld_board.h"
-#endif
-
-// Some macros just to make reading the code easier
-#define delayms(ms) chThdSleepMilliseconds(ms)
-#define write_data2(d1, d2) { write_data(d1); write_data(d2); }
-#define write_data3(d1, d2, d3) { write_data(d1); write_data(d2); write_data(d3); }
-#define write_cmd1(cmd, d1) { write_cmd(cmd); write_data(d1); }
-#define write_cmd2(cmd, d1, d2) { write_cmd(cmd); write_data2(d1, d2); }
-#define write_cmd3(cmd, d1, d2, d3) { write_cmd(cmd); write_data3(d1, d2, d3); }
-
-// A very common thing to do.
-// An inline function has been used here incase the parameters have side effects with the internal calculations.
-static __inline void setviewport(coord_t x, coord_t y, coord_t cx, coord_t cy) {
- write_cmd2(CASET, x, x+cx-1); // Column address set
- write_cmd2(PASET, y, y+cy-1); // Page address set
-}
-
-/*===========================================================================*/
-/* Driver interrupt handlers. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-/* ---- Required Routines ---- */
-/*
- The following 2 routines are required.
- All other routines are optional.
-*/
-
-/**
- * @brief Low level GDISP driver initialization.
- *
- * @notapi
- */
-bool_t GDISP_LLD(init)(void) {
- /* Initialise your display */
- init_board();
-
- // Hardware reset
- setpin_reset(TRUE);
- delayms(20);
- setpin_reset(FALSE);
- delayms(20);
-
- // Get the bus for the following initialisation commands
- acquire_bus();
-
- // UNTESTED
- #if 1
- write_cmd(SLEEPOUT); // Sleep out
- write_cmd(INVON); // Inversion on: seems to be required for this controller
- write_cmd1(COLMOD, 0x03); // Color Interface Pixel Format - 0x03 = 12 bits-per-pixel
- write_cmd1(MADCTL, 0xC8); // Memory access controler - 0xC0 = mirror x and y, reverse rgb
- write_cmd1(SETCON, GDISP_INITIAL_CONTRAST); // Write contrast
- delayms(20);
- write_cmd(DISPON); // Display On
- #else
- // Alternative
- write_cmd(SOFTRST); // Software Reset
- delayms(20);
- write_cmd(INITESC); // Initial escape
- delayms(20);
- write_cmd1(REFSET, 0x00); // Refresh set
- write_cmd(DISPCTRL); // Set Display control - really 7 bytes of data
- write_data(128); // Set the lenght of one selection term
- write_data(128); // Set N inversion -> no N inversion
- write_data(134); // Set frame frequence and bias rate -> 2 devision of frequency and 1/8 bias, 1/67 duty, 96x67 size
- write_data(84); // Set duty parameter
- write_data(69); // Set duty parameter
- write_data(82); // Set duty parameter
- write_data(67); // Set duty parameter
- write_cmd(GRAYSCALE0); // Grey scale 0 position set - really 15 bytes of data
- write_data(1); // GCP1 - gray lavel to be output when the RAM data is "0001"
- write_data(2); // GCP2 - gray lavel to be output when the RAM data is "0010"
- write_data(4); // GCP3 - gray lavel to be output when the RAM data is "0011"
- write_data(8); // GCP4 - gray lavel to be output when the RAM data is "0100"
- write_data(16); // GCP5 - gray lavel to be output when the RAM data is "0101"
- write_data(30); // GCP6 - gray lavel to be output when the RAM data is "0110"
- write_data(40); // GCP7 - gray lavel to be output when the RAM data is "0111"
- write_data(50); // GCP8 - gray lavel to be output when the RAM data is "1000"
- write_data(60); // GCP9 - gray lavel to be output when the RAM data is "1001"
- write_data(70); // GCP10 - gray lavel to be output when the RAM data is "1010"
- write_data(80); // GCP11 - gray lavel to be output when the RAM data is "1011"
- write_data(90); // GCP12 - gray lavel to be output when the RAM data is "1100"
- write_data(100); // GCP13 - gray lavel to be output when the RAM data is "1101"
- write_data(110); // GCP14 - gray lavel to be output when the RAM data is "1110"
- write_data(127); // GCP15 - gray lavel to be output when the RAM data is "1111"
- write_cmd1(GAMMA, 0x01); // Gamma curve set - select gray scale - GRAYSCALE 0 or GREYSCALE 1 - Select grey scale 0
- write_cmd1(COMMONDRV, 0x00); // Command driver output - Set COM1-COM41 side come first, normal mod
- write_cmd(NORMALMODE); // Set Normal mode (my)
- // write_cmd(INVERSIONOFF); // Inversion off
- write_cmd2(COLADDRSET, 0, 131); // Column address set
- write_cmd2(PAGEADDRSET, 0, 131); // Page address set
- write_cmd1(ACCESSCTRL, 0x40); // Memory access controler - 0x40 horizontal
- // write_data(0x20); // vertical
- write_cmd1(PWRCTRL, 0x04); // Power control - Internal resistance, V1OUT -> high power mode, oscilator devision rate
- write_cmd(SLEEPOUT); // Sleep out
- write_cmd(VOLTCTRL); // Voltage control - voltage control and write contrast define LCD electronic volume
- // write_data(0x7f); // full voltage control
- // write_data(0x03); // must be "1"
- write_cmd1(CONTRAST, GDISP_INITIAL_CONTRAST); // Write contrast
- delayms(20);
- write_cmd(TEMPGRADIENT); // Temperature gradient - really 14 bytes of data
- for(i=0; i<14; i++)
- write_data(0);
- write_cmd(BOOSTVON); // Booster voltage ON
- write_cmd(DISPLAYON); // Finally - Display On
- #endif
-
- // Release the bus
- release_bus();
-
- /* Turn on the back-light */
- set_backlight(GDISP_INITIAL_BACKLIGHT);
-
- /* Initialise the GDISP structure to match */
- GDISP.Width = GDISP_SCREEN_WIDTH;
- GDISP.Height = GDISP_SCREEN_HEIGHT;
- GDISP.Orientation = GDISP_ROTATE_0;
- GDISP.Powermode = powerOn;
- GDISP.Backlight = GDISP_INITIAL_BACKLIGHT;
- GDISP.Contrast = GDISP_INITIAL_CONTRAST;
- #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP
- GDISP.clipx0 = 0;
- GDISP.clipy0 = 0;
- GDISP.clipx1 = GDISP.Width;
- GDISP.clipy1 = GDISP.Height;
- #endif
- return TRUE;
-}
-
-/**
- * @brief Draws a pixel on the display.
- *
- * @param[in] x X location of the pixel
- * @param[in] y Y location of the pixel
- * @param[in] color The color of the pixel
- *
- * @notapi
- */
-void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) {
- #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP
- if (x < GDISP.clipx0 || y < GDISP.clipy0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return;
- #endif
- acquire_bus();
- setviewport(x, y, 1, 1);
- write_cmd3(RAMWR, 0, (color>>8) & 0x0F, color & 0xFF);
- release_bus();
-}
-
-/* ---- Optional Routines ---- */
-
-#if GDISP_HARDWARE_FILLS || defined(__DOXYGEN__)
- /**
- * @brief Fill an area with a color.
- *
- * @param[in] x, y The start filled area
- * @param[in] cx, cy The width and height to be filled
- * @param[in] color The color of the fill
- *
- * @notapi
- */
- void GDISP_LLD(fillarea)(coord_t x, coord_t y, coord_t cx, coord_t cy, color_t color) {
- unsigned i, tuples;
-
- #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP
- if (x < GDISP.clipx0) { cx -= GDISP.clipx0 - x; x = GDISP.clipx0; }
- if (y < GDISP.clipy0) { cy -= GDISP.clipy0 - y; y = GDISP.clipy0; }
- if (cx <= 0 || cy <= 0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return;
- if (x+cx > GDISP.clipx1) cx = GDISP.clipx1 - x;
- if (y+cy > GDISP.clipy1) cy = GDISP.clipy1 - y;
- #endif
-
- tuples = (cx*cy+1)/2; // With an odd sized area we over-print by one pixel.
- // This extra pixel is ignored by the controller.
-
- acquire_bus();
- setviewport(x, y, cx, cy);
- write_cmd(RAMWR);
- for(i=0; i < tuples; i++)
- write_data3(((color >> 4) & 0xFF), (((color << 4) & 0xF0)|((color >> 8) & 0x0F)), (color & 0xFF));
- release_bus();
- }
-#endif
-
-#if GDISP_HARDWARE_BITFILLS || defined(__DOXYGEN__)
- /**
- * @brief Fill an area with a bitmap.
- *
- * @param[in] x, y The start filled area
- * @param[in] cx, cy The width and height to be filled
- * @param[in] srcx, srcy The bitmap position to start the fill from
- * @param[in] srccx The width of a line in the bitmap.
- * @param[in] buffer The pixels to use to fill the area.
- *
- * @notapi
- */
- void GDISP_LLD(blitareaex)(coord_t x, coord_t y, coord_t cx, coord_t cy, coord_t srcx, coord_t srcy, coord_t srccx, const pixel_t *buffer) {
- coord_t endx, endy, lg;
- color_t c1, c2;
- #if GDISP_PACKED_PIXELS
- coord_t pos;
- const uint8_t *p;
- #endif
-
- #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP
- if (x < GDISP.clipx0) { cx -= GDISP.clipx0 - x; srcx += GDISP.clipx0 - x; x = GDISP.clipx0; }
- if (y < GDISP.clipy0) { cy -= GDISP.clipy0 - y; srcy += GDISP.clipy0 - y; y = GDISP.clipy0; }
- if (srcx+cx > srccx) cx = srccx - srcx;
- if (cx <= 0 || cy <= 0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return;
- if (x+cx > GDISP.clipx1) cx = GDISP.clipx1 - x;
- if (y+cy > GDISP.clipy1) cy = GDISP.clipy1 - y;
- #endif
-
- /* What are our end points */
- endx = srcx + cx;
- endy = y + cy;
-
- acquire_bus();
- setviewport(x, y, cx, cy);
- write_cmd(RAMWR);
-
- #if !GDISP_PACKED_PIXELS
- // Although this controller uses packed pixels we support unpacked pixel
- // formats in this blit by packing the data as we feed it to the controller.
- lg = srccx - cx;
- buffer += srcy * srccx + srcx;
- x = srcx;
- while (1) {
- /* Get a pixel */
- c1 = *buffer++;
- if (++x >= endx) {
- if (++y >= endy) {
- /* Odd pixel at end */
- write_data3(0, ((c1 >> 8) & 0x0F), (c1 & 0xFF));
- break;
- }
- x = srcx;
- buffer += lg;
- }
- /* Get the next pixel */
- c2 = *buffer++;
- write_data3(((c1 >> 4) & 0xFF), (((c1 << 4) & 0xF0)|((c2 >> 8) & 0x0F)), (c2 & 0xFF));
- if (++x >= endx) {
- if (++y >= endy)
- break;
- x = srcx;
- buffer += lg;
- }
- }
-
- #else
-
- // Although this controller uses packed pixels, we may have to feed it into
- // the controller with different packing to the source bitmap
- #if !GDISP_PACKED_LINES
- srccx = (srccx + 1) & ~1;
- #endif
- pos = srcy*srccx;
- lg = (srccx - cx)/2*3;
- p = ((const uint8_t *)buffer) + ((pos+srcx)/2 * 3);
-
- x = srcx;
- while (1) {
- /* Get a pixel */
- switch((pos+x)&1) {
- case 0: c1 = (((color_t)p[0]) << 4)|(((color_t)p[1])>>4); break;
- case 1: c1 = (((color_t)p[1]&0x0F) << 8)|((color_t)p[1]); break;
- }
- if (++x >= endx) {
- if (++y >= endy) {
- /* Odd pixel at end */
- write_data3(0, ((c1 >> 8) & 0x0F), (c1 & 0xFF));
- break;
- }
- x = srcx;
- p += lg;
- pos += srccx;
- }
- /* Get the next pixel */
- switch((pos+x)&1) {
- case 0: c2 = (((color_t)p[0]) << 4)|(((color_t)p[1])>>4); break;
- case 1: c2 = (((color_t)p[1]&0x0F) << 8)|((color_t)p[1]); break;
- }
- write_data3(((c1 >> 4) & 0xFF), (((c1 << 4) & 0xF0)|((c2 >> 8) & 0x0F)), (c2 & 0xFF));
- if (++x >= endx) {
- if (++y >= endy)
- break;
- x = srcx;
- p += lg;
- pos += srccx;
- }
- }
- #endif
- release_bus();
- }
-#endif
-
-#if (GDISP_NEED_PIXELREAD && GDISP_HARDWARE_PIXELREAD)
- /**
- * @brief Get the color of a particular pixel.
- * @note If x,y is off the screen, the result is undefined.
- *
- * @param[in] x, y The start of the text
- *
- * @notapi
- */
- color_t GDISP_LLD(getpixelcolor)(coord_t x, coord_t y) {
- /* NOT IMPLEMENTED */
- /* Some board hardware might support this in the future.
- * The Olimex board doesn't.
- */
- }
-#endif
-
-#if (GDISP_NEED_SCROLL && GDISP_HARDWARE_SCROLL)
- /**
- * @brief Scroll vertically a section of the screen.
- * @note If x,y + cx,cy is off the screen, the result is undefined.
- * @note If lines is >= cy, it is equivelent to a area fill with bgcolor.
- *
- * @param[in] x, y The start of the area to be scrolled
- * @param[in] cx, cy The size of the area to be scrolled
- * @param[in] lines The number of lines to scroll (Can be positive or negative)
- * @param[in] bgcolor The color to fill the newly exposed area.
- *
- * @notapi
- */
- void GDISP_LLD(verticalscroll)(coord_t x, coord_t y, coord_t cx, coord_t cy, int lines, color_t bgcolor) {
- /* NOT IMPLEMENTED */
- /* The hardware seems capable of doing this.
- * It is just really complex so we leave it out for now.
- */
- }
-#endif
-
-#if GDISP_HARDWARE_CONTROL || defined(__DOXYGEN__)
- /**
- * @brief Driver Control
- * @details Unsupported control codes are ignored.
- * @note The value parameter should always be typecast to (void *).
- * @note There are some predefined and some specific to the low level driver.
- * @note GDISP_CONTROL_POWER - Takes a gdisp_powermode_t
- * GDISP_CONTROL_ORIENTATION - Takes a gdisp_orientation_t
- * GDISP_CONTROL_BACKLIGHT - Takes an int from 0 to 100. For a driver
- * that only supports off/on anything other
- * than zero is on.
- * GDISP_CONTROL_CONTRAST - Takes an int from 0 to 100.
- * GDISP_CONTROL_LLD - Low level driver control constants start at
- * this value.
- *
- * @param[in] what What to do.
- * @param[in] value The value to use (always cast to a void *).
- *
- * @notapi
- */
- void GDISP_LLD(control)(unsigned what, void *value) {
- /* The hardware is capable of supporting...
- * GDISP_CONTROL_POWER - not implemented yet
- * GDISP_CONTROL_ORIENTATION - not implemented yet
- * GDISP_CONTROL_BACKLIGHT - supported (the OlimexSAM7EX256 board.h currently only implements off/on although PWM is supported by the hardware)
- * GDISP_CONTROL_CONTRAST - supported
- */
- switch(what) {
-#if 0
- // NOT IMPLEMENTED YET
- case GDISP_CONTROL_POWER:
- if (GDISP.Powermode == (gdisp_powermode_t)value)
- return;
- switch((gdisp_powermode_t)value) {
- case powerOff:
- // Code here
- break;
- case powerOn:
- // Code here
- /* You may need this ---
- * if (GDISP.Powermode != powerSleep)
- * GDISP_LLD(init)();
- */
- break;
- case powerSleep:
- /* Code here */
- break;
- default:
- return;
- }
- GDISP.Powermode = (gdisp_powermode_t)value;
- return;
-#endif
-#if 0
- // NOT IMPLEMENTED YET
- case GDISP_CONTROL_ORIENTATION:
- if (GDISP.Orientation == (gdisp_orientation_t)value)
- return;
- // WriteSpiData(0x48); // no mirror Y (temporary to satisfy Olimex bmptoarray utility)
- // WriteSpiData(0xC8); // restore to (mirror x and y, reverse rgb)
- switch((gdisp_orientation_t)value) {
- case GDISP_ROTATE_0:
- // Code here
- GDISP.Height = GDISP_SCREEN_HEIGHT;
- GDISP.Width = GDISP_SCREEN_WIDTH;
- break;
- case GDISP_ROTATE_90:
- // Code here
- GDISP.Height = GDISP_SCREEN_WIDTH;
- GDISP.Width = GDISP_SCREEN_HEIGHT;
- break;
- case GDISP_ROTATE_180:
- // Code here
- GDISP.Height = GDISP_SCREEN_HEIGHT;
- GDISP.Width = GDISP_SCREEN_WIDTH;
- break;
- case GDISP_ROTATE_270:
- // Code here
- GDISP.Height = GDISP_SCREEN_WIDTH;
- GDISP.Width = GDISP_SCREEN_HEIGHT;
- break;
- default:
- return;
- }
- #if GDISP_NEED_CLIP || GDISP_NEED_VALIDATION
- GDISP.clipx0 = 0;
- GDISP.clipy0 = 0;
- GDISP.clipx1 = GDISP.Width;
- GDISP.clipy1 = GDISP.Height;
- #endif
- GDISP.Orientation = (gdisp_orientation_t)value;
- return;
-#endif
- case GDISP_CONTROL_BACKLIGHT:
- if ((unsigned)value > 100) value = (void *)100;
- set_backlight((unsigned)value);
- GDISP.Backlight = (unsigned)value;
- return;
- case GDISP_CONTROL_CONTRAST:
- if ((unsigned)value > 100) value = (void *)100;
- acquire_bus();
- write_cmd1(CONTRAST,(unsigned)value);
- release_bus();
- GDISP.Contrast = (unsigned)value;
- return;
- }
- }
-#endif
-
-#endif /* GFX_USE_GDISP */
-/** @} */
diff --git a/drivers/gdisp/Nokia6610GE12/gdisp_lld.mk b/drivers/gdisp/Nokia6610GE12/gdisp_lld.mk deleted file mode 100644 index 575d52a3..00000000 --- a/drivers/gdisp/Nokia6610GE12/gdisp_lld.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List the required driver.
-GFXSRC += $(GFXLIB)/drivers/gdisp/Nokia6610GE12/gdisp_lld.c
-
-# Required include directories
-GFXINC += $(GFXLIB)/drivers/gdisp/Nokia6610GE12
diff --git a/drivers/gdisp/Nokia6610GE12/gdisp_lld_board_example.h b/drivers/gdisp/Nokia6610GE12/gdisp_lld_board_example.h deleted file mode 100644 index 1885f07c..00000000 --- a/drivers/gdisp/Nokia6610GE12/gdisp_lld_board_example.h +++ /dev/null @@ -1,135 +0,0 @@ -/*
- ChibiOS/GFX - Copyright (C) 2012
- Joel Bodenmann aka Tectu <joel@unormal.org>
-
- This file is part of ChibiOS/GFX.
-
- ChibiOS/GFX is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/GFX is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @file drivers/gdisp/Nokia6610GE12/gdisp_lld_board_example.h
- * @brief GDISP Graphic Driver subsystem board interface for the Nokia6610 GE12 display.
- *
- * @addtogroup GDISP
- * @{
- */
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-/**
- * @brief Initialise the board for the display.
- * @notes Performs the following functions:
- * 1. initialise the spi port used by your display
- * 2. initialise the reset pin (initial state not-in-reset)
- * 3. initialise the chip select pin (initial state not-active)
- * 4. initialise the backlight pin (initial state back-light off)
- *
- * @notapi
- */
-static __inline void init_board(void) {
- /* Code here */
- #error "gdispNokia6610GE12: You must supply a definition for init_board for your board"
-}
-
-/**
- * @brief Set or clear the lcd reset pin.
- *
- * @param[in] state TRUE = lcd in reset, FALSE = normal operation
- *
- * @notapi
- */
-static __inline void setpin_reset(bool_t state) {
- /* Code here */
- #error "gdispNokia6610GE12: You must supply a definition for setpin_reset for your board"
-}
-
-/**
- * @brief Set the lcd back-light level.
- * @note For now 0% turns the backlight off, anything else the backlight is on.
- * While the hardware supports PWM backlight control, we are not using it
- * yet.
- *
- * @param[in] percent 0 to 100%
- *
- * @notapi
- */
-static __inline void set_backlight(uint8_t percent) {
- /* Code here */
- #error "gdispNokia6610GE12: You must supply a definition for set_backlight for your board"
-}
-
-/**
- * @brief Take exclusive control of the bus
- *
- * @notapi
- */
-static __inline void acquire_bus(void) {
- /* Code here */
- #error "gdispNokia6610GE12: You must supply a definition for acquire_bus for your board"
-}
-
-/**
- * @brief Release exclusive control of the bus
- *
- * @notapi
- */
-static __inline void release_bus(void) {
- /* Code here */
- #error "gdispNokia6610GE12: You must supply a definition for release_bus for your board"
-}
-
-/**
- * @brief Send an 8 bit command to the lcd.
- *
- * @param[in] cmd The command to send
- *
- * @notapi
- */
-static __inline void write_cmd(uint16_t cmd) {
- /* Code here */
- #error "gdispNokia6610GE12: You must supply a definition for write_cmd for your board"
-}
-
-/**
- * @brief Send an 8 bit data to the lcd.
- *
- * @param[in] data The data to send
- *
- * @notapi
- */
-static __inline void write_data(uint16_t data) {
- /* Code here */
- #error "gdispNokia6610GE12: You must supply a definition for write_data for your board"
-}
-
-#if GDISP_HARDWARE_READPIXEL || GDISP_HARDWARE_SCROLL || defined(__DOXYGEN__)
-/**
- * @brief Read data from the lcd.
- *
- * @return The data from the lcd
- * @note The chip select may need to be asserted/de-asserted
- * around the actual spi read
- *
- * @notapi
- */
-static __inline uint16_t read_data(void) {
- /* Code here */
- #error "gdispNokia6610GE12: You must supply a definition for read_data for your board"
-}
-#endif
-
-#endif /* _GDISP_LLD_BOARD_H */
-/** @} */
diff --git a/drivers/gdisp/Nokia6610GE12/gdisp_lld_board_olimexsam7ex256.h b/drivers/gdisp/Nokia6610GE12/gdisp_lld_board_olimexsam7ex256.h deleted file mode 100644 index c161a9a3..00000000 --- a/drivers/gdisp/Nokia6610GE12/gdisp_lld_board_olimexsam7ex256.h +++ /dev/null @@ -1,196 +0,0 @@ -/*
- ChibiOS/GFX - Copyright (C) 2012
- Joel Bodenmann aka Tectu <joel@unormal.org>
-
- This file is part of ChibiOS/GFX.
-
- ChibiOS/GFX is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/GFX is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @file drivers/gdisp/Nokia6610GE12/gdisp_lld_board_olimexsam7ex256.h
- * @brief GDISP Graphic Driver subsystem board interface for the Olimex SAM7-EX256 board.
- *
- * @addtogroup GDISP
- * @{
- */
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-// ******************************************************
-// Pointers to AT91SAM7X256 peripheral data structures
-// ******************************************************
-volatile AT91PS_PIO pPIOA = AT91C_BASE_PIOA;
-volatile AT91PS_PIO pPIOB = AT91C_BASE_PIOB;
-volatile AT91PS_SPI pSPI = AT91C_BASE_SPI0;
-volatile AT91PS_PMC pPMC = AT91C_BASE_PMC;
-volatile AT91PS_PDC pPDC = AT91C_BASE_PDC_SPI0;
-
-/**
- * @brief Initialise the board for the display.
- * @notes Performs the following functions:
- * 1. initialise the spi port used by your display
- * 2. initialise the reset pin (initial state not-in-reset)
- * 3. initialise the chip select pin (initial state not-active)
- * 4. initialise the backlight pin (initial state back-light off)
- *
- * @notapi
- */
-static __inline void init_board(void) {
- // *********************************************************************************************
- // InitSpi( )
- //
- // Sets up SPI channel 0 for communications to Nokia 6610 LCD Display
- //
- // I/O ports used: PA2 = LCD Reset (set to low to reset)
- // PA12 = LCD chip select (set to low to select the LCD chip)
- // PA16 = SPI0_MISO Master In - Slave Out (not used in LCD interface)
- // PA17 = SPI0_MOSI Master Out - Slave In pin (Serial Data to LCD slave)
- // PA18 = SPI0_SPCK Serial Clock (to LCD slave)
- // PB20 = backlight control (normally PWM control, 1 = full on)
- //
- // *********************************************************************************************}
-
- /* This code should really use the ChibiOS driver for these functions */
-
- // Pin for backlight
- pPIOB->PIO_CODR = PIOB_LCD_BL_MASK; // Set PB20 to LOW
- pPIOB->PIO_OER = PIOB_LCD_BL_MASK; // Configure PB20 as output
-
- // Reset pin
- pPIOA->PIO_SODR = PIOA_LCD_RESET_MASK; // Set PA2 to HIGH
- pPIOA->PIO_OER = PIOA_LCD_RESET_MASK; // Configure PA2 as output
-
- // CS pin - this seems to be ignored
- // pPIOA->PIO_SODR = 1<<12; // Set PA2 to HIGH
- // pPIOA->PIO_OER = 1<<12; // Configure PA2 as output
-
- // Init SPI0
- // Disable the following pins from PIO control (will be used instead by the SPI0 peripheral)
- // BIT12 = PA12 -> SPI0_NPCS0 chip select
- // BIT16 = PA16 -> SPI0_MISO Master In - Slave Out (not used in LCD interface)
- // BIT17 = PA17 -> SPI0_MOSI Master Out - Slave In pin (Serial Data to LCD slave)
- // BIT18 = PA18 -> SPI0_SPCK Serial Clock (to LCD slave)
- pPIOA->PIO_PDR = (1<<12) | (1<<16) | (1<<17) | (1<<18);
- pPIOA->PIO_ASR = (1<<12) | (1<<16) | (1<<17) | (1<<18);
- pPIOA->PIO_BSR = 0;
-
- //enable the clock of SPI
- pPMC->PMC_PCER = 1 << AT91C_ID_SPI0;
-
- // Fixed mode
- pSPI->SPI_CR = 0x81; //SPI Enable, Sowtware reset
- pSPI->SPI_CR = 0x01; //SPI Enable
-
- //pSPI->SPI_MR = 0xE0019; //Master mode, fixed select, disable decoder, FDIV=1 (MCK), PCS=1110
- pSPI->SPI_MR = 0xE0011; //Master mode, fixed select, disable decoder, FDIV=0 (MCK), PCS=1110
-
- //pSPI->SPI_CSR[0] = 0x01010C11; //9bit, CPOL=1, ClockPhase=0, SCLK = 48Mhz/32*12 = 125kHz
- pSPI->SPI_CSR[0] = 0x01010311; //9bit, CPOL=1, ClockPhase=0, SCLK = 48Mhz/8 = 6MHz if using commented MR line above
-}
-
-/**
- * @brief Set or clear the lcd reset pin.
- *
- * @param[in] state TRUE = lcd in reset, FALSE = normal operation
- *
- * @notapi
- */
-static __inline void setpin_reset(bool_t state) {
- if (state)
- palClearPad(IOPORT1, PIOA_LCD_RESET);
- else
- palSetPad(IOPORT1, PIOA_LCD_RESET);
-}
-
-/**
- * @brief Set the lcd back-light level.
- * @note For now 0% turns the backlight off, anything else the backlight is on.
- * While the hardware supports PWM backlight control, we are not using it
- * yet.
- *
- * @param[in] percent 0 to 100%
- *
- * @notapi
- */
-static __inline void set_backlight(uint8_t percent) {
- if (percent)
- palSetPad(IOPORT2, PIOB_LCD_BL);
- else
- palClearPad(IOPORT2, PIOB_LCD_BL);
-}
-
-/**
- * @brief Take exclusive control of the bus
- *
- * @notapi
- */
-static __inline void acquire_bus(void) {
- /* Nothing to do for this board as the LCD is the only device on the SPI port */
-}
-
-/**
- * @brief Release exclusive control of the bus
- *
- * @notapi
- */
-static __inline void release_bus(void) {
- // Nothing to do for this board as the LCD is the only device on the SPI port
-}
-
-/**
- * @brief Send an 8 bit command to the lcd.
- *
- * @param[in] cmd The command to send
- *
- * @notapi
- */
-static __inline void write_cmd(uint16_t cmd) {
- // wait for the previous transfer to complete
- while((pSPI->SPI_SR & AT91C_SPI_TXEMPTY) == 0);
- // send the command
- pSPI->SPI_TDR = cmd & 0xFF;
-}
-
-/**
- * @brief Send an 8 bit data to the lcd.
- *
- * @param[in] data The data to send
- *
- * @notapi
- */
-static __inline void write_data(uint16_t data) {
- // wait for the previous transfer to complete
- while((pSPI->SPI_SR & AT91C_SPI_TXEMPTY) == 0);
- // send the data
- pSPI->SPI_TDR = data | 0x0100;
-}
-
-#if GDISP_HARDWARE_READPIXEL || GDISP_HARDWARE_SCROLL || defined(__DOXYGEN__)
-/**
- * @brief Read data from the lcd.
- *
- * @return The data from the lcd
- *
- * @notapi
- */
-static __inline uint16_t read_data(void) {
- #error "gdispNokia6610GE12: GDISP_HARDWARE_READPIXEL and GDISP_HARDWARE_SCROLL are not supported on this board"
- return 0;
-}
-#endif
-
-#endif /* _GDISP_LLD_BOARD_H */
-/** @} */
diff --git a/drivers/gdisp/Nokia6610GE12/gdisp_lld_config.h b/drivers/gdisp/Nokia6610GE12/gdisp_lld_config.h deleted file mode 100644 index ab9d35e7..00000000 --- a/drivers/gdisp/Nokia6610GE12/gdisp_lld_config.h +++ /dev/null @@ -1,58 +0,0 @@ -/*
- ChibiOS/GFX - Copyright (C) 2012
- Joel Bodenmann aka Tectu <joel@unormal.org>
-
- This file is part of ChibiOS/GFX.
-
- ChibiOS/GFX is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/GFX is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @file drivers/gdisp/Nokia6610GE12/gdisp_lld_config.h
- * @brief GDISP Graphic Driver subsystem low level driver header for the Nokia6610 GE12 display.
- *
- * @addtogroup GDISP
- * @{
- */
-
-#ifndef _GDISP_LLD_CONFIG_H
-#define _GDISP_LLD_CONFIG_H
-
-#if GFX_USE_GDISP
-
-/*===========================================================================*/
-/* Driver hardware support. */
-/*===========================================================================*/
-
-#define GDISP_DRIVER_NAME "Nokia6610GE12"
-#define GDISP_LLD(x) gdisp_lld_##x##_Nokia6610GE12
-
-#define GDISP_HARDWARE_FILLS TRUE
-#define GDISP_HARDWARE_BITFILLS TRUE
-#define GDISP_HARDWARE_CONTROL TRUE
-
-#define GDISP_SOFTWARE_TEXTFILLDRAW FALSE
-#define GDISP_SOFTWARE_TEXTBLITCOLUMN FALSE
-
-#define GDISP_PIXELFORMAT GDISP_PIXELFORMAT_RGB444
-/* This driver supports both packed and unpacked pixel formats and line formats.
- * By default we leave these as FALSE.
- */
-#define GDISP_PACKED_PIXELS FALSE
-#define GDISP_PACKED_LINES FALSE
-
-#endif /* GFX_USE_GDISP */
-
-#endif /* _GDISP_LLD_CONFIG_H */
-/** @} */
diff --git a/drivers/gdisp/Nokia6610GE12/readme.txt b/drivers/gdisp/Nokia6610GE12/readme.txt deleted file mode 100644 index 54c4570f..00000000 --- a/drivers/gdisp/Nokia6610GE12/readme.txt +++ /dev/null @@ -1,15 +0,0 @@ -This driver is for the Nokia6610 Philips (GE12) controller
-
-To use this driver:
-
-1. Add in your halconf.h:
- a) #define GFX_USE_GDISP TRUE
- b) Any optional high level driver defines (see gdisp.h) eg: GDISP_NEED_MULTITHREAD
- c) If you are not using a known board then create a gdisp_lld_board.h file
- and ensure it is on your include path.
- Use the gdisp_lld_board_example.h file as a basis.
- Currently known boards are:
- Olimex SAM7-EX256
-
-2. To your makefile add the following lines:
- include $(GFXLIB)/drivers/gdisp/Nokia6610GE12/gdisp_lld.mk
|