diff options
Diffstat (limited to 'drivers/gdisp/Nokia6610/gdisp_lld.c')
-rw-r--r-- | drivers/gdisp/Nokia6610/gdisp_lld.c | 624 |
1 files changed, 256 insertions, 368 deletions
diff --git a/drivers/gdisp/Nokia6610/gdisp_lld.c b/drivers/gdisp/Nokia6610/gdisp_lld.c index 5ebe2177..b1740609 100644 --- a/drivers/gdisp/Nokia6610/gdisp_lld.c +++ b/drivers/gdisp/Nokia6610/gdisp_lld.c @@ -60,8 +60,6 @@ /* Driver local functions. */
/*===========================================================================*/
-#include "gdisp_fonts.h"
-
#if defined(BOARD_OLIMEX_SAM7_EX256)
#include "gdisp_lld_board_olimexsam7ex256.h"
#else
@@ -69,16 +67,13 @@ #include "gdisp_lld_board.h"
#endif
-#define gdisp_lld_write_command(cmd) GDISP_LLD(write_spi)((cmd) & ~0x0100)
-#define gdisp_lld_write_data(data) GDISP_LLD(write_spi)((data) | 0x0100)
-
static __inline void gdisp_lld_setviewport(coord_t x, coord_t y, coord_t cx, coord_t cy) {
- gdisp_lld_write_command(CASET); // Column address set
- gdisp_lld_write_data(x);
- gdisp_lld_write_data(x+cx-1);
- gdisp_lld_write_command(PASET); // Page address set
- gdisp_lld_write_data(y);
- gdisp_lld_write_data(y+cy-1);
+ GDISP_LLD(write_cmd)(CASET); // Column address set
+ GDISP_LLD(write_data)(x);
+ GDISP_LLD(write_data)(x+cx-1);
+ GDISP_LLD(write_cmd)(PASET); // Page address set
+ GDISP_LLD(write_data)(y);
+ GDISP_LLD(write_data)(y+cy-1);
}
/*===========================================================================*/
@@ -112,141 +107,141 @@ bool_t GDISP_LLD(init)(void) { #if defined(LCD_USE_GE8)
#if 1
- gdisp_lld_write_command(DISCTL); // Display control
- gdisp_lld_write_data(0x00); // P1: 0x00 = 2 divisions, switching period=8 (default)
- gdisp_lld_write_data(0x20); // P2: 0x20 = nlines/4 - 1 = 132/4 - 1 = 32)
- gdisp_lld_write_data(0x00); // P3: 0x00 = no inversely highlighted lines
- gdisp_lld_write_command(COMSCN); // COM scan
- gdisp_lld_write_data(1); // P1: 0x01 = Scan 1->80, 160<-81
- gdisp_lld_write_command(OSCON); // Internal oscilator ON
- gdisp_lld_write_command(SLPOUT); // Sleep out
- gdisp_lld_write_command(PWRCTR); // Power control
- gdisp_lld_write_data(0x0f); // reference voltage regulator on, circuit voltage follower on, BOOST ON
+ GDISP_LLD(write_cmd)(DISCTL); // Display control
+ GDISP_LLD(write_data)(0x00); // P1: 0x00 = 2 divisions, switching period=8 (default)
+ GDISP_LLD(write_data)(0x20); // P2: 0x20 = nlines/4 - 1 = 132/4 - 1 = 32)
+ GDISP_LLD(write_data)(0x00); // P3: 0x00 = no inversely highlighted lines
+ GDISP_LLD(write_cmd)(COMSCN); // COM scan
+ GDISP_LLD(write_data)(1); // P1: 0x01 = Scan 1->80, 160<-81
+ GDISP_LLD(write_cmd)(OSCON); // Internal oscilator ON
+ GDISP_LLD(write_cmd)(SLPOUT); // Sleep out
+ GDISP_LLD(write_cmd)(PWRCTR); // Power control
+ GDISP_LLD(write_data)(0x0f); // reference voltage regulator on, circuit voltage follower on, BOOST ON
// Interesting - all the code seems to say this should be done. But my display doesn't want it!
- //gdisp_lld_write_command(DISINV); // Inverse display
- gdisp_lld_write_command(DATCTL); // Data control
- gdisp_lld_write_data(0x01); // P1: 0x01 = page address inverted, column address normal, address scan in column direction
- gdisp_lld_write_data(0x00); // P2: 0x00 = RGB sequence (default value)
- gdisp_lld_write_data(0x02); // P3: 0x02 = Grayscale -> 16 (selects 12-bit color, type A)
- gdisp_lld_write_command(VOLCTR); // Voltage control (contrast setting)
- gdisp_lld_write_data(32); // P1 = 32 volume value (experiment with this value to get the best contrast)
- gdisp_lld_write_data(3); // P2 = 3 resistance ratio (only value that works)
+ //GDISP_LLD(write_cmd)(DISINV); // Inverse display
+ GDISP_LLD(write_cmd)(DATCTL); // Data control
+ GDISP_LLD(write_data)(0x48/*0x01*/); // P1: 0x01 = page address inverted, column address normal, address scan in column direction
+ GDISP_LLD(write_data)(0x00); // P2: 0x00 = RGB sequence (default value)
+ GDISP_LLD(write_data)(0x02); // P3: 0x02 = Grayscale -> 16 (selects 12-bit color, type A)
+ GDISP_LLD(write_cmd)(VOLCTR); // Voltage control (contrast setting)
+ GDISP_LLD(write_data)(32); // P1 = 32 volume value (experiment with this value to get the best contrast)
+ GDISP_LLD(write_data)(3); // P2 = 3 resistance ratio (only value that works)
chThdSleepMilliseconds(100); // allow power supply to stabilize
- gdisp_lld_write_command(DISON); // Turn on the display
+ GDISP_LLD(write_cmd)(DISON); // Turn on the display
#else
// Alternative
- gdisp_lld_write_command(DISCTL); // Display control
- gdisp_lld_write_data(0x00); // default
- gdisp_lld_write_data(0x20); // (32 + 1) * 4 = 132 lines (of which 130 are visible)
- gdisp_lld_write_data(0x0a); // default
- gdisp_lld_write_command(COMSCN); // COM scan
- gdisp_lld_write_data(0x00); // Scan 1-80
- gdisp_lld_write_command(OSCON); // Internal oscilator ON
+ GDISP_LLD(write_cmd)(DISCTL); // Display control
+ GDISP_LLD(write_data)(0x00); // default
+ GDISP_LLD(write_data)(0x20); // (32 + 1) * 4 = 132 lines (of which 130 are visible)
+ GDISP_LLD(write_data)(0x0a); // default
+ GDISP_LLD(write_cmd)(COMSCN); // COM scan
+ GDISP_LLD(write_data)(0x00); // Scan 1-80
+ GDISP_LLD(write_cmd)(OSCON); // Internal oscilator ON
chThdSleepMilliseconds(100); // wait aproximetly 100ms
- gdisp_lld_write_command(SLPOUT); // Sleep out
- gdisp_lld_write_command(VOLCTR); // Voltage control
- gdisp_lld_write_data(0x1F); // middle value of V1
- gdisp_lld_write_data(0x03); // middle value of resistance value
- gdisp_lld_write_command(TMPGRD); // Temperature gradient
- gdisp_lld_write_data(0x00); // default
- gdisp_lld_write_command(PWRCTR); // Power control
- gdisp_lld_write_data(0x0f); // referance voltage regulator on, circuit voltage follower on, BOOST ON
- gdisp_lld_write_command(DISNOR); // Normal display
- gdisp_lld_write_command(DISINV); // Inverse display
- gdisp_lld_write_command(PTLOUT); // Partial area off
- // gdisp_lld_write_command(ASCSET); // Scroll area set
- // gdisp_lld_write_data(0);
- // gdisp_lld_write_data(0);
- // gdisp_lld_write_data(40);
- // gdisp_lld_write_data(3);
- // gdisp_lld_write_command(SCSTART); // Vertical scrool address start
- // gdisp_lld_write_data(0);
- gdisp_lld_write_command(DATCTL); // Data control
- gdisp_lld_write_data(0x00); // all inversions off, column direction
- gdisp_lld_write_data(0x03); // RGB sequence
- gdisp_lld_write_data(0x02); // Grayscale -> 16
- gdisp_lld_write_command(PASET); // Page Address set
- gdisp_lld_write_data(0);
- gdisp_lld_write_data(131);
- gdisp_lld_write_command(CASET); // Page Column set
- gdisp_lld_write_data(0);
- gdisp_lld_write_data(131);
- gdisp_lld_write_command(DISON); // Turn on the display
+ GDISP_LLD(write_cmd)(SLPOUT); // Sleep out
+ GDISP_LLD(write_cmd)(VOLCTR); // Voltage control
+ GDISP_LLD(write_data)(0x1F); // middle value of V1
+ GDISP_LLD(write_data)(0x03); // middle value of resistance value
+ GDISP_LLD(write_cmd)(TMPGRD); // Temperature gradient
+ GDISP_LLD(write_data)(0x00); // default
+ GDISP_LLD(write_cmd)(PWRCTR); // Power control
+ GDISP_LLD(write_data)(0x0f); // referance voltage regulator on, circuit voltage follower on, BOOST ON
+ GDISP_LLD(write_cmd)(DISNOR); // Normal display
+ GDISP_LLD(write_cmd)(DISINV); // Inverse display
+ GDISP_LLD(write_cmd)(PTLOUT); // Partial area off
+ // GDISP_LLD(write_cmd)(ASCSET); // Scroll area set
+ // GDISP_LLD(write_data)(0);
+ // GDISP_LLD(write_data)(0);
+ // GDISP_LLD(write_data)(40);
+ // GDISP_LLD(write_data)(3);
+ // GDISP_LLD(write_cmd)(SCSTART); // Vertical scrool address start
+ // GDISP_LLD(write_data)(0);
+ GDISP_LLD(write_cmd)(DATCTL); // Data control
+ GDISP_LLD(write_data)(0x00); // all inversions off, column direction
+ GDISP_LLD(write_data)(0x03); // RGB sequence
+ GDISP_LLD(write_data)(0x02); // Grayscale -> 16
+ GDISP_LLD(write_cmd)(PASET); // Page Address set
+ GDISP_LLD(write_data)(0);
+ GDISP_LLD(write_data)(131);
+ GDISP_LLD(write_cmd)(CASET); // Page Column set
+ GDISP_LLD(write_data)(0);
+ GDISP_LLD(write_data)(131);
+ GDISP_LLD(write_cmd)(DISON); // Turn on the display
#endif
#elif defined(LCD_USE_GE12)
#if 1
- gdisp_lld_write_command(SLEEPOUT); // Sleep out
- gdisp_lld_write_command(INVON); // Inversion on: seems to be required for this controller
- gdisp_lld_write_command(COLMOD); // Color Interface Pixel Format
- gdisp_lld_write_data(0x03); // 0x03 = 12 bits-per-pixel
- gdisp_lld_write_command(MADCTL); // Memory access controler
- gdisp_lld_write_data(0xC8); // 0xC0 = mirror x and y, reverse rgb
- gdisp_lld_write_command(SETCON); // Write contrast
- gdisp_lld_write_data(0x30); // contrast - experiental value
+ GDISP_LLD(write_cmd)(SLEEPOUT); // Sleep out
+ GDISP_LLD(write_cmd)(INVON); // Inversion on: seems to be required for this controller
+ GDISP_LLD(write_cmd)(COLMOD); // Color Interface Pixel Format
+ GDISP_LLD(write_data)(0x03); // 0x03 = 12 bits-per-pixel
+ GDISP_LLD(write_cmd)(MADCTL); // Memory access controler
+ GDISP_LLD(write_data)(0xC8); // 0xC0 = mirror x and y, reverse rgb
+ GDISP_LLD(write_cmd)(SETCON); // Write contrast
+ GDISP_LLD(write_data)(0x30); // contrast - experiental value
chThdSleepMilliseconds(20);
- gdisp_lld_write_command(DISPON); // Display On
+ GDISP_LLD(write_cmd)(DISPON); // Display On
#else
// Alternative
// Hardware reset commented out
- gdisp_lld_write_command(SOFTRST); // Software Reset
+ GDISP_LLD(write_cmd)(SOFTRST); // Software Reset
chThdSleepMilliseconds(20);
- gdisp_lld_write_command(INITESC); // Initial escape
+ GDISP_LLD(write_cmd)(INITESC); // Initial escape
chThdSleepMilliseconds(20);
- gdisp_lld_write_command(REFSET); // Refresh set
- gdisp_lld_write_data(0);
- gdisp_lld_write_command(DISPCTRL); // Set Display control
- gdisp_lld_write_data(128); // Set the lenght of one selection term
- gdisp_lld_write_data(128); // Set N inversion -> no N inversion
- gdisp_lld_write_data(134); // Set frame frequence and bias rate -> 2 devision of frequency and 1/8 bias, 1/67 duty, 96x67 size
- gdisp_lld_write_data(84); // Set duty parameter
- gdisp_lld_write_data(69); // Set duty parameter
- gdisp_lld_write_data(82); // Set duty parameter
- gdisp_lld_write_data(67); // Set duty parameter
- gdisp_lld_write_command(GRAYSCALE0); // Grey scale 0 position set - 15 parameters
- gdisp_lld_write_data(1); // GCP1 - gray lavel to be output when the RAM data is "0001"
- gdisp_lld_write_data(2); // GCP2 - gray lavel to be output when the RAM data is "0010"
- gdisp_lld_write_data(4); // GCP3 - gray lavel to be output when the RAM data is "0011"
- gdisp_lld_write_data(8); // GCP4 - gray lavel to be output when the RAM data is "0100"
- gdisp_lld_write_data(16); // GCP5 - gray lavel to be output when the RAM data is "0101"
- gdisp_lld_write_data(30); // GCP6 - gray lavel to be output when the RAM data is "0110"
- gdisp_lld_write_data(40); // GCP7 - gray lavel to be output when the RAM data is "0111"
- gdisp_lld_write_data(50); // GCP8 - gray lavel to be output when the RAM data is "1000"
- gdisp_lld_write_data(60); // GCP9 - gray lavel to be output when the RAM data is "1001"
- gdisp_lld_write_data(70); // GCP10 - gray lavel to be output when the RAM data is "1010"
- gdisp_lld_write_data(80); // GCP11 - gray lavel to be output when the RAM data is "1011"
- gdisp_lld_write_data(90); // GCP12 - gray lavel to be output when the RAM data is "1100"
- gdisp_lld_write_data(100); // GCP13 - gray lavel to be output when the RAM data is "1101"
- gdisp_lld_write_data(110); // GCP14 - gray lavel to be output when the RAM data is "1110"
- gdisp_lld_write_data(127); // GCP15 - gray lavel to be output when the RAM data is "1111"
- gdisp_lld_write_command(GAMMA); // Gamma curve set - select gray scale - GRAYSCALE 0 or GREYSCALE 1
- gdisp_lld_write_data(1); // Select grey scale 0
- gdisp_lld_write_command(COMMONDRV); // Command driver output
- gdisp_lld_write_data(0); // Set COM1-COM41 side come first, normal mod
- gdisp_lld_write_command(NORMALMODE); // Set Normal mode (my)
- // gdisp_lld_write_command(INVERSIONOFF); // Inversion off
- gdisp_lld_write_command(COLADDRSET); // Column address set
- gdisp_lld_write_data(0);
- gdisp_lld_write_data(131);
- gdisp_lld_write_command(PAGEADDRSET); // Page address set
- gdisp_lld_write_data(0);
- gdisp_lld_write_data(131);
- gdisp_lld_write_command(ACCESSCTRL); // Memory access controler
- gdisp_lld_write_data(0x40); // horizontal
- //gdisp_lld_write_data(0x20); // vertical
- gdisp_lld_write_command(PWRCTRL); // Power control
- gdisp_lld_write_data(4); // Internal resistance, V1OUT -> high power mode, oscilator devision rate
- gdisp_lld_write_command(SLEEPOUT); // Sleep out
- gdisp_lld_write_command(VOLTCTRL); // Voltage control - voltage control and write contrast define LCD electronic volume
- //gdisp_lld_write_data(0x7f); // full voltage control
- //gdisp_lld_write_data(0x03); // must be "1"
- gdisp_lld_write_command(CONTRAST); // Write contrast
- gdisp_lld_write_data(0x3b); // contrast
+ GDISP_LLD(write_cmd)(REFSET); // Refresh set
+ GDISP_LLD(write_data)(0);
+ GDISP_LLD(write_cmd)(DISPCTRL); // Set Display control
+ GDISP_LLD(write_data)(128); // Set the lenght of one selection term
+ GDISP_LLD(write_data)(128); // Set N inversion -> no N inversion
+ GDISP_LLD(write_data)(134); // Set frame frequence and bias rate -> 2 devision of frequency and 1/8 bias, 1/67 duty, 96x67 size
+ GDISP_LLD(write_data)(84); // Set duty parameter
+ GDISP_LLD(write_data)(69); // Set duty parameter
+ GDISP_LLD(write_data)(82); // Set duty parameter
+ GDISP_LLD(write_data)(67); // Set duty parameter
+ GDISP_LLD(write_cmd)(GRAYSCALE0); // Grey scale 0 position set - 15 parameters
+ GDISP_LLD(write_data)(1); // GCP1 - gray lavel to be output when the RAM data is "0001"
+ GDISP_LLD(write_data)(2); // GCP2 - gray lavel to be output when the RAM data is "0010"
+ GDISP_LLD(write_data)(4); // GCP3 - gray lavel to be output when the RAM data is "0011"
+ GDISP_LLD(write_data)(8); // GCP4 - gray lavel to be output when the RAM data is "0100"
+ GDISP_LLD(write_data)(16); // GCP5 - gray lavel to be output when the RAM data is "0101"
+ GDISP_LLD(write_data)(30); // GCP6 - gray lavel to be output when the RAM data is "0110"
+ GDISP_LLD(write_data)(40); // GCP7 - gray lavel to be output when the RAM data is "0111"
+ GDISP_LLD(write_data)(50); // GCP8 - gray lavel to be output when the RAM data is "1000"
+ GDISP_LLD(write_data)(60); // GCP9 - gray lavel to be output when the RAM data is "1001"
+ GDISP_LLD(write_data)(70); // GCP10 - gray lavel to be output when the RAM data is "1010"
+ GDISP_LLD(write_data)(80); // GCP11 - gray lavel to be output when the RAM data is "1011"
+ GDISP_LLD(write_data)(90); // GCP12 - gray lavel to be output when the RAM data is "1100"
+ GDISP_LLD(write_data)(100); // GCP13 - gray lavel to be output when the RAM data is "1101"
+ GDISP_LLD(write_data)(110); // GCP14 - gray lavel to be output when the RAM data is "1110"
+ GDISP_LLD(write_data)(127); // GCP15 - gray lavel to be output when the RAM data is "1111"
+ GDISP_LLD(write_cmd)(GAMMA); // Gamma curve set - select gray scale - GRAYSCALE 0 or GREYSCALE 1
+ GDISP_LLD(write_data)(1); // Select grey scale 0
+ GDISP_LLD(write_cmd)(COMMONDRV); // Command driver output
+ GDISP_LLD(write_data)(0); // Set COM1-COM41 side come first, normal mod
+ GDISP_LLD(write_cmd)(NORMALMODE); // Set Normal mode (my)
+ // GDISP_LLD(write_cmd)(INVERSIONOFF); // Inversion off
+ GDISP_LLD(write_cmd)(COLADDRSET); // Column address set
+ GDISP_LLD(write_data)(0);
+ GDISP_LLD(write_data)(131);
+ GDISP_LLD(write_cmd)(PAGEADDRSET); // Page address set
+ GDISP_LLD(write_data)(0);
+ GDISP_LLD(write_data)(131);
+ GDISP_LLD(write_cmd)(ACCESSCTRL); // Memory access controler
+ GDISP_LLD(write_data)(0x40); // horizontal
+ //GDISP_LLD(write_data)(0x20); // vertical
+ GDISP_LLD(write_cmd)(PWRCTRL); // Power control
+ GDISP_LLD(write_data)(4); // Internal resistance, V1OUT -> high power mode, oscilator devision rate
+ GDISP_LLD(write_cmd)(SLEEPOUT); // Sleep out
+ GDISP_LLD(write_cmd)(VOLTCTRL); // Voltage control - voltage control and write contrast define LCD electronic volume
+ //GDISP_LLD(write_data)(0x7f); // full voltage control
+ //GDISP_LLD(write_data)(0x03); // must be "1"
+ GDISP_LLD(write_cmd)(CONTRAST); // Write contrast
+ GDISP_LLD(write_data)(0x3b); // contrast
chThdSleepMilliseconds(20);
- gdisp_lld_write_command(TEMPGRADIENT); // Temperature gradient
- for(i=0; i<14; i++) gdisp_lld_write_data(0);
- gdisp_lld_write_command(BOOSTVON); // Booster voltage ON
- gdisp_lld_write_command(DISPLAYON); // Finally - Display On
+ GDISP_LLD(write_cmd)(TEMPGRADIENT); // Temperature gradient
+ for(i=0; i<14; i++) GDISP_LLD(write_data)(0);
+ GDISP_LLD(write_cmd)(BOOSTVON); // Booster voltage ON
+ GDISP_LLD(write_cmd)(DISPLAYON); // Finally - Display On
#endif
#endif
@@ -260,6 +255,12 @@ bool_t GDISP_LLD(init)(void) { GDISP.Powermode = powerOn;
GDISP.Backlight = 100;
GDISP.Contrast = 50;
+ #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP
+ GDISP.clipx0 = 0;
+ GDISP.clipy0 = 0;
+ GDISP.clipx1 = GDISP.Width-1;
+ GDISP.clipy1 = GDISP.Height-1;
+ #endif
return TRUE;
}
@@ -273,70 +274,21 @@ bool_t GDISP_LLD(init)(void) { * @notapi
*/
void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) {
- #if GDISP_NEED_VALIDATION
- if (x >= GDISP.Width || y >= GDISP.Height) return;
+ #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP
+ if (x < GDISP.clipx0 || y < GDISP.clipy0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return;
#endif
gdisp_lld_setviewport(x, y, 1, 1);
- gdisp_lld_write_command(RAMWR);
- gdisp_lld_write_data((color >> 4) & 0xFF);
- gdisp_lld_write_data((color << 4) & 0xF0);
- gdisp_lld_write_command(NOP);
+ GDISP_LLD(write_cmd)(RAMWR);
+ GDISP_LLD(write_data)((color >> 4) & 0xFF);
+ GDISP_LLD(write_data)((color << 4) & 0xF0);
+ GDISP_LLD(write_cmd)(NOP);
}
/* ---- Optional Routines ---- */
-/*
- All the below routines are optional.
- Defining them will increase speed but everything
- will work if they are not defined.
- If you are not using a routine - turn it off using
- the appropriate GDISP_HARDWARE_XXXX macro.
- Don't bother coding for obvious similar routines if
- there is no performance penalty as the emulation software
- makes a good job of using similar routines.
- eg. If fillarea() is defined there is little
- point in defining clear() unless the
- performance bonus is significant.
- For good performance it is suggested to implement
- fillarea() and blitarea().
-*/
-
-#if GDISP_HARDWARE_CLEARS || defined(__DOXYGEN__)
- /**
- * @brief Clear the display.
- * @note Optional - The high level driver can emulate using software.
- *
- * @param[in] color The color of the pixel
- *
- * @notapi
- */
- void GDISP_LLD(clear(color_t color) {
- /* NOT IMPLEMENTED */
- /* Nothing to be gained by implementing this
- * as fillarea is just as fast.
- */
- }
-#endif
-
-#if GDISP_HARDWARE_LINES || defined(__DOXYGEN__)
- /**
- * @brief Draw a line.
- * @note Optional - The high level driver can emulate using software.
- *
- * @param[in] x0, y0 The start of the line
- * @param[in] x1, y1 The end of the line
- * @param[in] color The color of the line
- *
- * @notapi
- */
- void GDISP_LLD(drawline)(coord_t x0, coord_t y0, coord_t x1, coord_t y1, color_t color) {
- /* NOT IMPLEMENTED */
- }
-#endif
#if GDISP_HARDWARE_FILLS || defined(__DOXYGEN__)
/**
* @brief Fill an area with a color.
- * @note Optional - The high level driver can emulate using software.
*
* @param[in] x, y The start filled area
* @param[in] cx, cy The width and height to be filled
@@ -357,11 +309,11 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) { // This extra pixel is ignored by the controller.
gdisp_lld_setviewport(x, y, cx, cy);
- gdisp_lld_write_command(RAMWR);
+ GDISP_LLD(write_cmd)(RAMWR);
for(i=0; i < tuples; i++) {
- gdisp_lld_write_data((color >> 4) & 0xFF);
- gdisp_lld_write_data(((color << 4) & 0xF0)|((color >> 8) & 0x0F));
- gdisp_lld_write_data(color & 0xFF);
+ GDISP_LLD(write_data)((color >> 4) & 0xFF);
+ GDISP_LLD(write_data)(((color << 4) & 0xF0)|((color >> 8) & 0x0F));
+ GDISP_LLD(write_data)(color & 0xFF);
}
}
#endif
@@ -369,175 +321,125 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) { #if GDISP_HARDWARE_BITFILLS || defined(__DOXYGEN__)
/**
* @brief Fill an area with a bitmap.
- * @note Optional - The high level driver can emulate using software.
*
* @param[in] x, y The start filled area
* @param[in] cx, cy The width and height to be filled
+ * @param[in] srcx, srcy The bitmap position to start the fill from
+ * @param[in] srccx The width of a line in the bitmap.
* @param[in] buffer The pixels to use to fill the area.
*
* @notapi
*/
- void GDISP_LLD(blitarea)(coord_t x, coord_t y, coord_t cx, coord_t cy, const pixel_t *buffer) {
- unsigned i, area, tuples;
- #ifndef GDISP_PACKED_PIXELS
- color_t c1, c2;
+ void GDISP_LLD(blitareaex)(coord_t x, coord_t y, coord_t cx, coord_t cy, coord_t srcx, coord_t srcy, coord_t srccx, const pixel_t *buffer) {
+ coord_t endx, endy, lg;
+ color_t c1, c2;
+ #if GDISP_PACKED_PIXELS
+ coord_t pos;
+ const uint8_t *p;
#endif
- #if GDISP_NEED_VALIDATION
- if (cx < 1 || cy < 1 || x >= GDISP.Width || y >= GDISP.Height) return;
- if (x+cx > GDISP.Width) return;
- if (y+cy > GDISP.Height) cy = GDISP.Height - y;
+ #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP
+ if (x < GDISP.clipx0) { cx -= GDISP.clipx0 - x; srcx += GDISP.clipx0 - x; x = GDISP.clipx0; }
+ if (y < GDISP.clipy0) { cy -= GDISP.clipy0 - y; srcy += GDISP.clipy0 - y; y = GDISP.clipy0; }
+ if (srcx+cx > srccx) cx = srccx - srcx;
+ if (cx <= 0 || cy <= 0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return;
+ if (x+cx > GDISP.clipx1) cx -= GDISP.clipx1 - x;
+ if (y+cy > GDISP.clipy1) cy -= GDISP.clipy1 - y;
#endif
- area = cx*cy;
+ /* What are our end points */
+ endx = srcx + cx;
+ endy = y + cy;
gdisp_lld_setviewport(x, y, cx, cy);
- gdisp_lld_write_command(RAMWR);
-
- #ifdef GDISP_PACKED_PIXELS
- // 3 bytes per 2 pixels + an extra 2 bytes if the total size is odd.
- // Note we can't just over-estimate this and let the controller handle the extra pixel
- // as that might over-run our source buffer (very bad in some circumstances).
- tuples = (area/2)*3+(area & 0x01)*2;
- for(i=0; i < tuples; i++)
- gdisp_lld_write_data(*buffer++);
- if (area & 0x01)
- gdisp_lld_write_command(NOP);
- #else
+ GDISP_LLD(write_cmd)(RAMWR);
+
+ #if !GDISP_PACKED_PIXELS
// Although this controller uses packed pixels we support unpacked pixel
// formats in this blit by packing the data as we feed it to the controller.
- tuples = area/2;
- for(i=0; i < tuples; i++) {
+ lg = srccx - cx;
+ buffer += srcy * srccx + srcx;
+ x = srcx;
+ while (1) {
+ /* Get a pixel */
c1 = *buffer++;
+ if (++x >= endx) {
+ if (++y >= endy) {
+ /* Odd pixel at end */
+ GDISP_LLD(write_data)((c1 >> 4) & 0xFF);
+ GDISP_LLD(write_data)((c1 << 4) & 0xF0);
+ GDISP_LLD(write_cmd)(NOP);
+ break;
+ }
+ x = srcx;
+ buffer += lg;
+ }
+ /* Get the next pixel */
c2 = *buffer++;
- gdisp_lld_write_data((c1 >> 4) & 0xFF);
- gdisp_lld_write_data(((c1 << 4) & 0xF0)|((c2 >> 8) & 0x0F));
- gdisp_lld_write_data(c2 & 0xFF);
+ GDISP_LLD(write_data)((c1 >> 4) & 0xFF);
+ GDISP_LLD(write_data)(((c1 << 4) & 0xF0)|((c2 >> 8) & 0x0F));
+ GDISP_LLD(write_data)(c2 & 0xFF);
+ if (++x >= endx) {
+ if (++y >= endy)
+ break;
+ x = srcx;
+ buffer += lg;
+ }
}
- if (area & 0x01) {
- c1 = *buffer++;
- gdisp_lld_write_data((c1 >> 4) & 0xFF);
- gdisp_lld_write_data((c1 << 4) & 0xF0);
- gdisp_lld_write_command(NOP);
- }
- #endif
- }
-#endif
-/* Circular Drawing Functions */
-#if (GDISP_NEED_CIRCLE && GDISP_HARDWARE_CIRCLES) || defined(__DOXYGEN__)
- /**
- * @brief Draw a circle.
- * @note Optional - The high level driver can emulate using software.
- * @note If GDISP_NEED_CLIPPING is defined this routine MUST behave
- * correctly if the circle is over the edges of the screen.
- *
- * @param[in] x, y The centre of the circle
- * @param[in] radius The radius of the circle
- * @param[in] color The color of the circle
- *
- * @notapi
- */
- void GDISP_LLD(drawcircle)(coord_t x, coord_t y, coord_t radius, color_t color) {
- /* NOT IMPLEMENTED */
- }
-#endif
-
-#if (GDISP_NEED_CIRCLE && GDISP_HARDWARE_CIRCLEFILLS) || defined(__DOXYGEN__)
- /**
- * @brief Create a filled circle.
- * @note Optional - The high level driver can emulate using software.
- * @note If GDISP_NEED_CLIPPING is defined this routine MUST behave
- * correctly if the circle is over the edges of the screen.
- *
- * @param[in] x, y The centre of the circle
- * @param[in] radius The radius of the circle
- * @param[in] color The color of the circle
- *
- * @notapi
- */
- void GDISP_LLD(fillcircle)(coord_t x, coord_t y, coord_t radius, color_t color) {
- /* NOT IMPLEMENTED */
- }
-#endif
-
-#if (GDISP_NEED_ELLIPSE && GDISP_HARDWARE_ELLIPSES) || defined(__DOXYGEN__)
- /**
- * @brief Draw an ellipse.
- * @note Optional - The high level driver can emulate using software.
- * @note If GDISP_NEED_CLIPPING is defined this routine MUST behave
- * correctly if the ellipse is over the edges of the screen.
- *
- * @param[in] x, y The centre of the ellipse
- * @param[in] a, b The dimensions of the ellipse
- * @param[in] color The color of the ellipse
- *
- * @notapi
- */
- void GDISP_LLD(drawellipse)(coord_t x, coord_t y, coord_t a, coord_t b, color_t color) {
- /* NOT IMPLEMENTED */
- }
-#endif
-
-#if (GDISP_NEED_ELLIPSE && GDISP_HARDWARE_ELLIPSEFILLS) || defined(__DOXYGEN__)
- /**
- * @brief Create a filled ellipse.
- * @note Optional - The high level driver can emulate using software.
- * @note If GDISP_NEED_CLIPPING is defined this routine MUST behave
- * correctly if the ellipse is over the edges of the screen.
- *
- * @param[in] x, y The centre of the ellipse
- * @param[in] a, b The dimensions of the ellipse
- * @param[in] color The color of the ellipse
- *
- * @notapi
- */
- void GDISP_LLD(fillellipse)(coord_t x, coord_t y, coord_t a, coord_t b, color_t color) {
- /* NOT IMPLEMENTED */
- }
-#endif
-
-#if (GDISP_NEED_TEXT && GDISP_HARDWARE_TEXT) || defined(__DOXYGEN__)
- #include "gdisp_fonts.h"
-#endif
-
-#if (GDISP_NEED_TEXT && GDISP_HARDWARE_TEXT) || defined(__DOXYGEN__)
- /**
- * @brief Draw a character using a transparent background.
- * @note Optional - The high level driver can emulate using software.
- *
- * @param[in] x, y The top-left corner of the text
- * @param[in] c The character to print
- * @param[in] color The color of the character
- *
- * @notapi
- */
- void GDISP_LLD(drawchar)(coord_t x, coord_t y, char c, font_t font, color_t color) {
- /* NOT IMPLEMENTED */
- }
-#endif
+ #else
-#if (GDISP_NEED_TEXT && GDISP_HARDWARE_TEXTFILLS) || defined(__DOXYGEN__)
- /**
- * @brief Draw a character using a filled background.
- * @note Optional - The high level driver can emulate using software.
- *
- * @param[in] x, y The top-left corner of the text
- * @param[in] c The character to print
- * @param[in] color The color of the character
- * @param[in] bgcolor The background color
- *
- * @notapi
- */
- void GDISP_LLD(fillchar)(coord_t x, coord_t y, char c, font_t font, color_t color, color_t bgcolor) {
- /* NOT IMPLEMENTED */
+ // Although this controller uses packed pixels, we may have to feed it into
+ // the controller with different packing to the source bitmap
+ #if !GDISP_PACKED_LINES
+ srccx = (srccx + 1) & ~1;
+ #endif
+ pos = srcy*srccx;
+ lg = (srccx - cx)/2*3;
+ p = ((const uint8_t *)buffer) + ((pos+srcx)/2 * 3);
+
+ x = srcx;
+ while (1) {
+ /* Get a pixel */
+ switch((pos+x)&1) {
+ case 0: c1 = (((color_t)p[0]) << 4)|(((color_t)p[1])>>4); break;
+ case 1: c1 = (((color_t)p[1]&0x0F) << 8)|((color_t)p[1]); break;
+ }
+ if (++x >= endx) {
+ if (++y >= endy) {
+ /* Odd pixel at end */
+ GDISP_LLD(write_data)((c1 >> 4) & 0xFF);
+ GDISP_LLD(write_data)((c1 << 4) & 0xF0);
+ GDISP_LLD(write_cmd)(NOP);
+ break;
+ }
+ x = srcx;
+ p += lg;
+ pos += srccx;
+ }
+ /* Get the next pixel */
+ switch((pos+x)&1) {
+ case 0: c2 = (((color_t)p[0]) << 4)|(((color_t)p[1])>>4); break;
+ case 1: c2 = (((color_t)p[1]&0x0F) << 8)|((color_t)p[1]); break;
+ }
+ GDISP_LLD(write_data)((c1 >> 4) & 0xFF);
+ GDISP_LLD(write_data)(((c1 << 4) & 0xF0)|((c2 >> 8) & 0x0F));
+ GDISP_LLD(write_data)(c2 & 0xFF);
+ if (++x >= endx) {
+ if (++y >= endy)
+ break;
+ x = srcx;
+ p += lg;
+ pos += srccx;
+ }
+ }
+ #endif
}
#endif
-#if (GDISP_NEED_PIXELREAD && GDISP_HARDWARE_PIXELREAD) || defined(__DOXYGEN__)
+#if (GDISP_NEED_PIXELREAD && GDISP_HARDWARE_PIXELREAD)
/**
* @brief Get the color of a particular pixel.
- * @note Optional.
* @note If x,y is off the screen, the result is undefined.
*
* @param[in] x, y The start of the text
@@ -546,13 +448,15 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) { */
color_t GDISP_LLD(getpixelcolor)(coord_t x, coord_t y) {
/* NOT IMPLEMENTED */
+ /* Some board hardware might support this in the future.
+ * The Olimex board doesn't.
+ */
}
#endif
-#if (GDISP_NEED_SCROLL && GDISP_HARDWARE_SCROLL) || defined(__DOXYGEN__)
+#if (GDISP_NEED_SCROLL && GDISP_HARDWARE_SCROLL)
/**
* @brief Scroll vertically a section of the screen.
- * @note Optional.
* @note If x,y + cx,cy is off the screen, the result is undefined.
* @note If lines is >= cy, it is equivelent to a area fill with bgcolor.
*
@@ -565,6 +469,9 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) { */
void GDISP_LLD(verticalscroll)(coord_t x, coord_t y, coord_t cx, coord_t cy, int lines, color_t bgcolor) {
/* NOT IMPLEMENTED */
+ /* The hardware seems capable of doing this.
+ * It is just really complex so we leave it out for now.
+ */
}
#endif
@@ -590,6 +497,13 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) { */
void GDISP_LLD(control)(int what, void *value) {
/* NOT IMPLEMENTED YET */
+ /* The hardware is capable of supporting...
+ * GDISP_CONTROL_POWER
+ * GDISP_CONTROL_ORIENTATION
+ * GDISP_CONTROL_BACKLIGHT (at least on the Olimex board)
+ * GDISP_CONTROL_CONTRAST
+ * We don't currently implement any of it.
+ */
switch(what) {
case GDISP_CONTROL_POWER:
if (GDISP.Powermode == (gdisp_powermode_t)value)
@@ -602,7 +516,7 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) { /* Code here */
/* You may need this ---
if (GDISP.Powermode != powerSleep)
- GDISP_LLD(init();
+ GDISP_LLD(init)();
*/
break;
case powerSleep:
@@ -642,6 +556,12 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) { default:
return;
}
+ #if GDISP_NEED_CLIP || GDISP_NEED_VALIDATION
+ GDISP.clipx0 = 0;
+ GDISP.clipy0 = 0;
+ GDISP.clipx1 = GDISP.Width;
+ GDISP.clipy1 = GDISP.Height;
+ #endif
GDISP.Orientation = (gdisp_orientation_t)value;
return;
/*
@@ -652,37 +572,5 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) { }
#endif
-#if (GDISP_NEED_QUERY && GDISP_HARDWARE_QUERY) || defined(__DOXYGEN__)
-/**
- * @brief Query a driver value.
- * @detail Typecase the result to the type you want.
- * @note GDISP_QUERY_WIDTH - (coord_t) Gets the width of the screen
- * GDISP_QUERY_HEIGHT - (coord_t) Gets the height of the screen
- * GDISP_QUERY_POWER - (gdisp_powermode_t) Get the current powermode
- * GDISP_QUERY_ORIENTATION - (gdisp_orientation_t) Get the current screen orientation
- * GDISP_QUERY_BACKLIGHT - (coord_t) Get the backlight state (0 to 100)
- * GDISP_QUERY_CONTRAST - (coord_t) Get the contrast (0 to 100).
- * GDISP_QUERY_LLD - Low level driver control constants start at
- * this value.
- *
- * @param[in] what What to Query
- *
- * @notapi
- */
-void *GDISP_LLD(query)(unsigned what) {
- switch(what) {
- case GDISP_QUERY_WIDTH: return (void *)(unsigned)GDISP.Width;
- case GDISP_QUERY_HEIGHT: return (void *)(unsigned)GDISP.Height;
- case GDISP_QUERY_POWER: return (void *)(unsigned)GDISP.Powermode;
- case GDISP_QUERY_ORIENTATION: return (void *)(unsigned)GDISP.Orientation;
- case GDISP_QUERY_BACKLIGHT: return (void *)(unsigned)GDISP.Backlight;
- case GDISP_QUERY_CONTRAST: return (void *)(unsigned)GDISP.Contrast;
- case GDISP_QUERY_LLD+0:
- /* Code here */
- default: return (void *)-1;
- }
-}
-#endif
-
#endif /* HAL_USE_GDISP */
/** @} */
|