1 files changed, 0 insertions, 130 deletions
diff --git a/drivers/gdisp/ILI9341/board_ILI9341_mikromedia.h b/drivers/gdisp/ILI9341/board_ILI9341_mikromedia.h
deleted file mode 100644
index a0eed13b..00000000
--- a/drivers/gdisp/ILI9341/board_ILI9341_mikromedia.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-/**
- * @file    drivers/gdisp/ILI9341/board_ILI9341_mikromedia.h
- * @brief   GDISP Graphics Driver subsystem low level driver source for the ILI9341 display.
- */
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-// For a multiple display configuration we would put all this in a structure and then
-//	set g->board to that structure.
-#define SET_CS    palSetPad(GPIOE, GPIOE_LCD_CS);
-#define CLR_CS    palClearPad(GPIOE, GPIOE_LCD_CS);
-#define SET_RS    palSetPad(GPIOE, GPIOE_LCD_RS);
-#define CLR_RS    palClearPad(GPIOE, GPIOE_LCD_RS);
-#define SET_WR    palSetPad(GPIOE, GPIOE_PMWR);
-#define CLR_WR    palClearPad(GPIOE, GPIOE_PMWR);
-#define SET_RD    palSetPad(GPIOE, GPIOE_PMRD);
-#define CLR_RD    palClearPad(GPIOE, GPIOE_PMRD);
-
-static inline void init_board(GDisplay *g) {
-
-	// As we are not using multiple displays we set g->board to NULL as we don't use it.
-	g->board = 0;
-
-	switch(g->controllerdisplay) {
-	case 0:											// Set up for Display 0
-		/* Configure the pins to a well know state */
-		SET_RS;
-		SET_RD;
-		SET_WR;
-		CLR_CS;
-
-		/* Hardware reset */
-		palSetPad(GPIOE, GPIOE_LCD_RST);
-		chThdSleepMilliseconds(100);
-		palClearPad(GPIOE, GPIOE_LCD_RST);
-		chThdSleepMilliseconds(100);
-		palSetPad(GPIOE, GPIOE_LCD_RST);
-		chThdSleepMilliseconds(100);
-		break;
-	}
-}
-
-static inline void post_init_board(GDisplay *g) {
-	(void) g;
-}
-
-static inline void setpin_reset(GDisplay *g, bool_t state) {
-	(void) g;
-	if(state) {
-		// reset lcd
-		palClearPad(GPIOE, GPIOE_LCD_RST);
-	} else {
-		palSetPad(GPIOE, GPIOE_LCD_RST);
-	}
-}
-
-static inline void set_backlight(GDisplay *g, uint8_t percent) {
-	(void) g;
-	// TODO: can probably pwm this
-	if(percent) {
-		// turn back light on
-		palSetPad(GPIOE, GPIOE_LCD_BLED);
-	} else {
-		// turn off
-		palClearPad(GPIOE, GPIOE_LCD_BLED);
-	}
-}
-
-static inline void acquire_bus(GDisplay *g) {
-	(void) g;
-}
-
-static inline void release_bus(GDisplay *g) {
-	(void) g;
-}
-
-/**
- * @brief   Short delay
- *
- * @param[in] dly		Length of delay
- *
- * @notapi
- */
-static inline void ili9341_delay(uint16_t dly) {
-  static uint16_t i;
-  for(i = 0; i < dly; i++)
-    asm("nop");
-}
-
-static inline void write_index(GDisplay *g, uint16_t index) {
-	(void) g;
-	palWriteGroup(GPIOE, 0x00FF, 0, index);
-	CLR_RS; CLR_WR; ili9341_delay(1); SET_WR; ili9341_delay(1); SET_RS;
-}
-
-static inline void write_data(GDisplay *g, uint16_t data) {
-	(void) g;
-	palWriteGroup(GPIOE, 0x00FF, 0, data);
-	CLR_WR; ili9341_delay(1); SET_WR; ili9341_delay(1);
-}
-
-static inline void setreadmode(GDisplay *g) {
-	(void) g;
-	// change pin mode to digital input
-	palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_INPUT);
-}
-
-static inline void setwritemode(GDisplay *g) {
-	(void) g;
-	// change pin mode back to digital output
-	palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
-}
-
-static inline uint16_t read_data(GDisplay *g) {
-	CLR_RD;
-	value = palReadPort(GPIOE);
-	value = palReadPort(GPIOE);
-	SET_RD;
-	return value;
-}
-
-#endif /* _GDISP_LLD_BOARD_H */