diff options
Diffstat (limited to 'drivers/gdisp/ILI9325/gdisp_lld_board_hy_stm32_100p.h')
-rw-r--r-- | drivers/gdisp/ILI9325/gdisp_lld_board_hy_stm32_100p.h | 119 |
1 files changed, 0 insertions, 119 deletions
diff --git a/drivers/gdisp/ILI9325/gdisp_lld_board_hy_stm32_100p.h b/drivers/gdisp/ILI9325/gdisp_lld_board_hy_stm32_100p.h deleted file mode 100644 index 3e2c269b..00000000 --- a/drivers/gdisp/ILI9325/gdisp_lld_board_hy_stm32_100p.h +++ /dev/null @@ -1,119 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -/* - driver quickly hacked together from a chinese sourcecode that came - with the board and existing ili9320 code by Chris van Dongen (sjaak) - (sjaak2002 at msn.com) - - Also added rotation for 180 and 270 degrees and minor tweaks to - setcursor - - Added code comes without warranty and free bugs. Feel free to use - or misuse the added code :D -*/ - - -/** - * @file drivers/gdisp/ILI9325/gdisp_lld_board_hy_stm32_100p.h - * @brief GDISP Graphic Driver subsystem board interface for the ILI9325 display. - * - * @addtogroup GDISP - * @{ - */ - -#ifndef GDISP_LLD_BOARD_H -#define GDISP_LLD_BOARD_H - -#define GDISP_REG (*((volatile uint16_t *) 0x60000000)) /* RS = 0 */ -#define GDISP_RAM (*((volatile uint16_t *) 0x60020000)) /* RS = 1 */ - -static inline void init_board(void) { - /* FSMC setup for F1 */ - rccEnableAHB(RCC_AHBENR_FSMCEN, 0); - - /* set pin modes */ -/* IOBus busD = {GPIOD, PAL_WHOLE_PORT, 0}; - IOBus busE = {GPIOE, PAL_WHOLE_PORT, 0}; - palSetBusMode(&busD, PAL_MODE_STM32_ALTERNATE_PUSHPULL); - palSetBusMode(&busE, PAL_MODE_STM32_ALTERNATE_PUSHPULL); - palSetPadMode(GPIOE, GPIOE_TFT_RST, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOD, GPIOD_TFT_LIGHT, PAL_MODE_OUTPUT_PUSHPULL); */ - - const unsigned char FSMC_Bank = 0; - - /* FSMC timing */ - FSMC_Bank1->BTCR[FSMC_Bank+1] = (6) | (10 << 8) | (10 << 16); - - /* Bank1 NOR/SRAM control register configuration - * This is actually not needed as already set by default after reset */ - FSMC_Bank1->BTCR[FSMC_Bank] = FSMC_BCR1_MWID_0 | FSMC_BCR1_WREN | FSMC_BCR1_MBKEN; - -} - -static inline void setpin_reset(bool_t state) { - if(state) - palClearPad(GPIOE, GPIOE_TFT_RST); - else - palSetPad(GPIOE, GPIOE_TFT_RST); -} - -static inline void write_index(uint16_t reg) { - GDISP_REG = reg; -} - -static inline void write_data(uint16_t data) { - GDISP_RAM = data; -} - -static inline uint16_t read_data(void) { - return GDISP_RAM; -} - -static inline void set_backlight(uint8_t percent) { - (void)percent; -} - -/** - * @brief Take exclusive control of the bus - * - * @notapi - */ -static inline void acquire_bus(void) { - -} - -/** - * @brief Release exclusive control of the bus - * - * @notapi - */ -static inline void release_bus(void) { - -} - -/** - * @brief Set the bus in read mode - * - * @notapi - */ -static inline void setreadmode(void) { - -} - -/** - * @brief Set the bus back into write mode - * - * @notapi - */ -static inline void setwritemode(void) { - -} - -#endif /* GDISP_LLD_BOARD_H */ -/** @} */ - |