1 files changed, 0 insertions, 111 deletions
diff --git a/boards/base/Marlin/ginput_lld_mouse_board.h b/boards/base/Marlin/ginput_lld_mouse_board.h
deleted file mode 100644
index d787d224..00000000
--- a/boards/base/Marlin/ginput_lld_mouse_board.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-/**
- * @file    drivers/ginput/touch/FT5x06/ginput_lld_mouse_board_marlin.h
- * @brief   GINPUT Touch low level driver source for the FT5x06.
- *
- * @defgroup Mouse Mouse
- * @ingroup GINPUT
- * @{
- */
-
-#ifndef _GINPUT_LLD_MOUSE_BOARD_H
-#define _GINPUT_LLD_MOUSE_BOARD_H
-
-/* I2C interface #2 - Touchscreen controller */
-static const I2CConfig i2ccfg2 = {
-    OPMODE_I2C,
-    400000,
-    FAST_DUTY_CYCLE_2,
-};
-
-/**
- * @brief   Initialise the board for the touch.
- *
- * @notapi
- */
-static void init_board(void) {
-
-}
-
-
-/**
- * @brief	Write a value into a certain register
- *
- * @param[in] reg	The register address
- * @param[in] n		The amount of bytes (one or two)
- * @param[in] val	The value
- *
- * @notapi
- */
-static void write_reg(uint8_t reg, uint8_t n, uint16_t val) {
-	uint8_t txbuf[3];
-
-	i2cAcquireBus(&I2CD2);
-
-	txbuf[0] = reg;
-
-	if (n == 1) {
-		txbuf[1] = val;
-		i2cMasterTransmitTimeout(&I2CD2, FT5x06_ADDR, txbuf, 2, 0, 0, MS2ST(FT5x06_TIMEOUT));
-	} else if (n == 2) {
-		txbuf[1] = ((val & 0xFF00) >> 8);
-		txbuf[2] = (val & 0x00FF);
-		i2cMasterTransmitTimeout(&I2CD2, FT5x06_ADDR, txbuf, 3, 0, 0, MS2ST(FT5x06_TIMEOUT));
-	}
-	
-	i2cReleaseBus(&I2CD2);
-}
- 
-/**
- * @brief	Read the value of a certain register
- *
- * @param[in] reg	The register address
- * @param[in] n		The amount of bytes (one or two)
- *
- * @return Data read from device (one byte or two depending on n param)
- *
- * @notapi
- */
-static uint16_t read_reg(uint8_t reg, uint8_t n) {
-	uint8_t txbuf[1], rxbuf[2];
-	uint16_t ret;
-
-	rxbuf[0] = 0;
-	rxbuf[1] = 0;
-
-	i2cAcquireBus(&I2CD2);
-
-	txbuf[0] = reg;
-	i2cMasterTransmitTimeout(&I2CD2, FT5x06_ADDR, txbuf, 1, rxbuf, n, MS2ST(FT5x06_TIMEOUT));
-
-	if (n == 1) {
-		ret = rxbuf[0];
-	} else if (n == 2) {
-		ret = ((rxbuf[0] << 8) | (rxbuf[1] & 0xFF));
-	}
-
-	i2cReleaseBus(&I2CD2);
-
-	return ret;
-}
-
-static void read_reg_n(uint8_t reg, uint8_t n, uint8_t *rxbuf) {
-	uint8_t txbuf[1];
-
-	i2cAcquireBus(&I2CD2);
-
-	txbuf[0] = reg;
-	i2cMasterTransmitTimeout(&I2CD2, FT5x06_ADDR, txbuf, 1, rxbuf, n, MS2ST(FT5x06_TIMEOUT));
-
-	i2cReleaseBus(&I2CD2);
-}
-
-#endif /* _GINPUT_LLD_MOUSE_BOARD_H */
-/** @} */
-