diff options
author | Joel Bodenmann <joel@unormal.org> | 2013-07-21 17:42:25 +0200 |
---|---|---|
committer | Joel Bodenmann <joel@unormal.org> | 2013-07-21 17:42:25 +0200 |
commit | d98e6c5d0d6c048c99aeda810da10e6a6a130325 (patch) | |
tree | 397a911a667c873bcd68419307519210fe150e9b /drivers/ginput/touch/STMPE811/readme.txt | |
parent | c29950c7670397d60b32e92fa4aadb29fea227a4 (diff) | |
download | uGFX-d98e6c5d0d6c048c99aeda810da10e6a6a130325.tar.gz uGFX-d98e6c5d0d6c048c99aeda810da10e6a6a130325.tar.bz2 uGFX-d98e6c5d0d6c048c99aeda810da10e6a6a130325.zip |
cleaned up board file mess
Diffstat (limited to 'drivers/ginput/touch/STMPE811/readme.txt')
-rw-r--r-- | drivers/ginput/touch/STMPE811/readme.txt | 20 |
1 files changed, 0 insertions, 20 deletions
diff --git a/drivers/ginput/touch/STMPE811/readme.txt b/drivers/ginput/touch/STMPE811/readme.txt deleted file mode 100644 index 065840d8..00000000 --- a/drivers/ginput/touch/STMPE811/readme.txt +++ /dev/null @@ -1,20 +0,0 @@ -The STMPE811 driver comes with two different #defines to perfectly fit -your application: - - -STMPE811_NO_GPIO_IRQPIN -This Macro is meant to be set in your board file. When you set this macro to -TRUE, the GINPUT module will not use the IRQ lane which might be connected -to a GPIO pin to recognize interrupts by the STMPE811 controller. This -costs a few more I2C calls. -When the interrupt IRQ pin is connected to a GPIO of your MCU, set this -macro to FALSE. - - -STMP811_SLOW_CPU -If you have a slow CPU and you need to take care of your resources, you can -set this macro TRUE. This will save some IRQs and therefore a few I2C calls. -The disadvantage is a little higher response time. -If you don't want to draw continious lines on your display, it's recommended -to set this to TRUE anyways. - |