removed xxx_unknown.h board files from ginput drivers

1 files changed, 0 insertions, 174 deletions

diff --git a/drivers/ginput/touch/MCU/ginput_lld_mouse_board_unknown.h b/drivers/ginput/touch/MCU/ginput_lld_mouse_board_unknown.h
deleted file mode 100644
index f16661c8..00000000
--- a/drivers/ginput/touch/MCU/ginput_lld_mouse_board_unknown.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/*

-    ChibiOS/GFX - Copyright (C) 2012

-                 Joel Bodenmann aka Tectu <joel@unormal.org>

-

-    This file is part of ChibiOS/GFX.

-

-    ChibiOS/GFX is free software; you can redistribute it and/or modify

-    it under the terms of the GNU General Public License as published by

-    the Free Software Foundation; either version 3 of the License, or

-    (at your option) any later version.

-

-    ChibiOS/GFX is distributed in the hope that it will be useful,

-    but WITHOUT ANY WARRANTY; without even the implied warranty of

-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

-    GNU General Public License for more details.

-

-    You should have received a copy of the GNU General Public License

-    along with this program.  If not, see <http://www.gnu.org/licenses/>.

-*/

-

-/**

- * @file    drivers/ginput/touch/MCU/ginput_lld_mouse_board_unknown.h

- * @brief   GINPUT Touch low level driver source for the MCU on some unknown board.

- *

- * @addtogroup GINPUT_MOUSE

- * @{

- */

-

-#ifndef _GINPUT_LLD_MOUSE_BOARD_H

-#define _GINPUT_LLD_MOUSE_BOARD_H

-

-#define ADC_NUM_CHANNELS   2

-#define ADC_BUF_DEPTH      1

-

-static const ADCConversionGroup adc_y_config = {

-    FALSE,

-    ADC_NUM_CHANNELS,

-    NULL,

-    NULL,

-    0, 0,

-    0, 0,

-    ADC_SQR1_NUM_CH(ADC_NUM_CHANNELS),

-    0,

-    ADC_SQR3_SQ2_N(ADC_CHANNEL_IN12) | ADC_SQR3_SQ1_N(ADC_CHANNEL_IN13)

-};

-

-static const ADCConversionGroup adc_x_config = {

-    FALSE,

-    ADC_NUM_CHANNELS,

-    NULL,

-    NULL,

-    0, 0,

-    0, 0,

-    ADC_SQR1_NUM_CH(ADC_NUM_CHANNELS),

-    0,

-    ADC_SQR3_SQ2_N(ADC_CHANNEL_IN10) | ADC_SQR3_SQ1_N(ADC_CHANNEL_IN11)

-};

-

-/**

- * @brief   Initialise the board for the mouse/touch.

- *

- * @notapi

- */

-static __inline void init_board(void) {

-	/* Code here */

-	#error "ginputMCU: You must supply a definition for init_board for your board

-	

-	adcStart(ts->adc_driver, NULL);

-}

-

-/**

- * @brief   Check whether the surface is currently touched

- * @return	TRUE if the surface is currently touched

- *

- * @notapi

- */

-static __inline bool_t getpin_pressed(void) {

-	/* Code here */

-	#error "ginputMCU: You must supply a definition for getpin_pressed for your board"

-	palSetPadMode(ts->yd_port, ts->yd_pin, PAL_MODE_INPUT_PULLDOWN);

-	palSetPadMode(ts->yu_port, ts->yu_pin, PAL_MODE_INPUT);

-	palSetPadMode(ts->xl_port, ts->xl_pin, PAL_MODE_INPUT);

-	palSetPadMode(ts->xr_port, ts->xr_pin, PAL_MODE_OUTPUT_PUSHPULL);

-	palSetPad(ts->xr_port, ts->xr_pin);

-

-	return palReadPad(ts->yd_port, ts->yd_pin);

-}

-

-/**

- * @brief   Aquire the bus ready for readings

- *

- * @notapi

- */

-static __inline void aquire_bus(void) {

-	/* Code here */

-	#error "ginputMCU: You must supply a definition for aquire_bus for your board"

-}

-

-/**

- * @brief   Release the bus after readings

- *

- * @notapi

- */

-static __inline void release_bus(void) {

-	/* Code here */

-	#error "ginputMCU: You must supply a definition for release_bus for your board"

-}

-

-/**

- * @brief   Read an x value from touch controller

- * @return	The value read from the controller

- *

- * @notapi

- */

-static __inline uint16_t read_x_value(void) {

-	/* Code here */

-	#error "ginputMCU: You must supply a definition for read_x_value for your board"

-	uint16_t val1, val2;

-	adcsample_t samples[ADC_NUM_CHANNELS * ADC_BUF_DEPTH];

-

-    palSetPadMode(ts->yd_port, ts->yd_pin, PAL_MODE_INPUT_ANALOG);

-    palSetPadMode(ts->yu_port, ts->yu_pin, PAL_MODE_INPUT_ANALOG);

-    palSetPadMode(ts->xl_port, ts->xl_pin, PAL_MODE_OUTPUT_PUSHPULL);

-    palSetPadMode(ts->xr_port, ts->xr_pin, PAL_MODE_OUTPUT_PUSHPULL);

-

-    palSetPad(ts->xl_port, ts->xl_pin);

-    palClearPad(ts->xr_port, ts->xr_pin);

-    chThdSleepMilliseconds(1);

-    adcConvert(ts->adc_driver, &adc_x_config, samples, ADC_BUF_DEPTH);

-    val1 = ((samples[0] + samples[1])/2);

-

-    palClearPad(ts->xl_port, ts->xl_pin);

-    palSetPad(ts->xr_port, ts->xr_pin);

-    chThdSleepMilliseconds(1);

-    adcConvert(ts->adc_driver, &adc_x_config, samples, ADC_BUF_DEPTH);

-    val2 = ((samples[0] + samples[1])/2);

-

-	return ((val1+((1<<12)-val2))/4);

-}

-

-/**

- * @brief   Read an y value from touch controller

- * @return	The value read from the controller

- *

- * @notapi

- */

-static __inline uint16_t read_y_value(void) {

-	/* Code here */

-	#error "ginputMCU: You must supply a definition for read_y_value for your board"

-	uint16_t val1, val2;

-	adcsample_t samples[ADC_NUM_CHANNELS * ADC_BUF_DEPTH];

-

-	palSetPadMode(ts->xl_port, ts->xl_pin, PAL_MODE_INPUT_ANALOG);

-	palSetPadMode(ts->xr_port, ts->xr_pin, PAL_MODE_INPUT_ANALOG);

-	palSetPadMode(ts->yd_port, ts->yd_pin, PAL_MODE_OUTPUT_PUSHPULL);

-	palSetPadMode(ts->yu_port, ts->yu_pin, PAL_MODE_OUTPUT_PUSHPULL);

-

-	palSetPad(ts->yu_port, ts->yu_pin);

-	palClearPad(ts->yd_port, ts->yd_pin);

-	chThdSleepMilliseconds(1);

-	adcConvert(ts->adc_driver, &adc_y_config, samples, ADC_BUF_DEPTH);

-	val1 = ((samples[0] + samples[1])/2);

-

-	palClearPad(ts->yu_port, ts->yu_pin);

-	palSetPad(ts->yd_port, ts->yd_pin);

-	chThdSleepMilliseconds(1);

-	adcConvert(ts->adc_driver, &adc_y_config, samples, ADC_BUF_DEPTH);

-	val2 = ((samples[0] + samples[1])/2);

-

-	return ((val1+((1<<12)-val2))/4);

-}

-

-#endif /* _GINPUT_LLD_MOUSE_BOARD_H */

-/** @} */