removed GDISP_LLD() macro

1 files changed, 0 insertions, 144 deletions

diff --git a/drivers/ginput/touch/ADS7843/ginput_lld_mouse.c b/drivers/ginput/touch/ADS7843/ginput_lld_mouse.c
deleted file mode 100644
index 65065176..00000000
--- a/drivers/ginput/touch/ADS7843/ginput_lld_mouse.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/*

-    ChibiOS/GFX - Copyright (C) 2012

-                 Joel Bodenmann aka Tectu <joel@unormal.org>

-

-    This file is part of ChibiOS/GFX.

-

-    ChibiOS/GFX is free software; you can redistribute it and/or modify

-    it under the terms of the GNU General Public License as published by

-    the Free Software Foundation; either version 3 of the License, or

-    (at your option) any later version.

-

-    ChibiOS/GFX is distributed in the hope that it will be useful,

-    but WITHOUT ANY WARRANTY; without even the implied warranty of

-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

-    GNU General Public License for more details.

-

-    You should have received a copy of the GNU General Public License

-    along with this program.  If not, see <http://www.gnu.org/licenses/>.

-*/

-

-/**

- * @file    drivers/ginput/touch/ADS7843/ginput_lld_mouse.c

- * @brief   GINPUT Touch low level driver source for the ADS7843.

- *

- * @defgroup Mouse Mouse

- * @ingroup GINPUT

- * @{

- */

-

-#include "ch.h"

-#include "hal.h"

-#include "gfx.h"

-

-#if (GFX_USE_GINPUT && GINPUT_NEED_MOUSE) /*|| defined(__DOXYGEN__)*/

-

-#include "ginput/lld/mouse.h"

-

-#if defined(GINPUT_MOUSE_USE_CUSTOM_BOARD) && GINPUT_MOUSE_USE_CUSTOM_BOARD

-	#include "ginput_lld_mouse_board.h"

-#elif defined(BOARD_FIREBULL_STM32_F103)

-	#include "ginput_lld_mouse_board_firebull_stm32f103.h"

-#elif defined(BOARD_OLIMEX_STM32_E407)

-	#include "ginput_lld_mouse_board_olimex_stm32_e407.h"

-#else

-	#include "ginput_lld_mouse_board_example.h"

-#endif

-

-static uint16_t sampleBuf[7];

-static coord_t	lastx, lasty;

-

-/**

- * @brief   7-point median filtering code for touch samples

- *

- * @note    This is an internally used routine only.

- *

- * @notapi

- */

-static void filter(void) {

-	uint16_t temp;

-	int i,j;

-

-	for(i = 0; i < 4; i++) {

-		for(j = i; j < 7; j++) {

-			if(sampleBuf[i] > sampleBuf[j]) {

-				/* Swap the values */

-				temp = sampleBuf[i];

-				sampleBuf[i] = sampleBuf[j];

-				sampleBuf[j] = temp;

-			}

-		}

-	}

-}

-

-/**

- * @brief   Initialise the mouse/touch.

- *

- * @notapi

- */

-void ginput_lld_mouse_init(void) {

-	init_board();

-}

-

-/**

- * @brief   Read the mouse/touch position.

- *

- * @param[in] pt	A pointer to the structure to fill

- *

- * @note			For drivers that don't support returning a position

- *					when the touch is up (most touch devices), it should

- *					return the previous position with the new Z value.

- *					The z value is the pressure for those touch devices

- *					that support it (-100 to 100 where > 0 is touched)

- *					or, 0 or 100 for those drivers that don't.

- *

- * @notapi

- */

-void ginput_lld_mouse_get_reading(MouseReading *pt) {

-	uint16_t i;

-

-	// If touch-off return the previous results

-	if (!getpin_pressed()) {

-		pt->x = lastx;

-		pt->y = lasty;

-		pt->z = 0;

-		pt->buttons = 0;

-		return;

-	}

-	

-	// Read the port to get the touch settings

-	aquire_bus();

-

-	/* Get the X value

-	 * Discard the first conversion - very noisy and keep the ADC on hereafter

-	 * till we are done with the sampling. Note that PENIRQ is disabled while reading.

-	 * Finally switch on PENIRQ once again - perform a dummy read.

-	 * Once we have the readings, find the medium using our filter function

- 	 */

-	read_value(0xD1);

-	for(i = 0; i < 7; i++)

-		sampleBuf[i] = read_value(0xD1);

-	read_value(0xD0);

-	filter();

-	lastx = (coord_t)sampleBuf[3];

-

-	/* Get the Y value using the same process as above */

-	read_value(0x91);

-	for(i = 0; i < 7; i++)

-		sampleBuf[i] = read_value(0x91);

-	read_value(0x90);

-	filter();

-	lasty = (coord_t)sampleBuf[3];

-

-	// Release the bus

-	release_bus();

-	

-	// Return the results

-	pt->x = lastx;

-	pt->y = lasty;

-	pt->z = 100;

-	pt->buttons = GINPUT_TOUCH_PRESSED;

-}

-

-#endif /* GFX_USE_GINPUT && GINPUT_NEED_MOUSE */

-/** @} */