new ILI9320 driver - please use as template

1 files changed, 157 insertions, 157 deletions

diff --git a/drivers/gdisp/ILI9320/gdisp_lld.c b/drivers/gdisp/ILI9320/gdisp_lld.c
index d17c5cb0..26fad328 100644
--- a/drivers/gdisp/ILI9320/gdisp_lld.c
+++ b/drivers/gdisp/ILI9320/gdisp_lld.c
@@ -20,7 +20,7 @@
 

 /**

  * @file    drivers/gdisp/ILI9320/gdisp_lld.c

- * @brief   GDISP Graphics Driver subsystem low level driver source for the SSD1289 display.

+ * @brief   GDISP Graphics Driver subsystem low level driver source for the ILI9320 display.

  *

  * @addtogroup GDISP

  * @{

@@ -35,61 +35,121 @@
 /* Include the emulation code for things we don't support */

 #include "gdisp_emulation.c"

 

-#include "ili9320_lld.c.h"

+#if defined(BOARD_OLIMEX_STM32_LCD)

+	#include "gdisp_lld_board_olimex_stm32_lcd.h"

+#else

+	#include "gdisp_lld_board_example.h"

+#endif

 

 /*===========================================================================*/

-/* Driver interrupt handlers.                                                */

+/* Driver local definitions.                                                 */

 /*===========================================================================*/

 

+/* This controller is only ever used with a 240 x 320 display */

+#if defined(GDISP_SCREEN_HEIGHT)

+	#undef GDISP_SCREEN_HEIGHT

+#endif

+#if defined(GDISP_SCREEN_WIDTH)

+	#undef GDISP_SCREEN_WIDTH

+#endif

+

+#define GDISP_SCREEN_WIDTH		240

+#define GDISP_SCREEN_HEIGHT		320

+

 /*===========================================================================*/

-/* Driver exported functions.                                                */

+/* Driver exported variables.                                                */

 /*===========================================================================*/

 

-/* ---- Required Routines ---- */

-/*

-	The following 2 routines are required.

-	All other routines are optional.

-*/

+/*===========================================================================*/

+/* Driver local variables.                                                   */

+/*===========================================================================*/

+uint32_t DISPLAY_CODE;

 

-/**

- * @brief   Low level GDISP driver initialization.

- *

- * @notapi

- */

-bool_t GDISP_LLD(init)(void) {

-#if defined(GDISP_USE_FSMC)

+/*===========================================================================*/

+/* Driver local functions.                                                   */

+/*===========================================================================*/

+static __inline void lld_lcdDelay(uint16_t us) {

+    chThdSleepMicroseconds(us);

+}

+

+static __inline void lld_lcdWriteIndex(uint16_t index) {

+	GDISP_LLD(write_index)(index);

+}

 

-	/* FSMC setup for F1/F3 */

-	rccEnableAHB(RCC_AHBENR_FSMCEN, 0);

+static __inline void lld_lcdWriteData(uint16_t data) {

+	GDISP_LLD(write_data)(data);

+}

 

-   	/* set pins to FSMC mode */

-   	IOBus busD = {GPIOD, PAL_WHOLE_PORT, 0};

-   	IOBus busE = {GPIOE, PAL_WHOLE_PORT, 0};

+static __inline void lld_lcdWriteReg(uint16_t lcdReg, uint16_t lcdRegValue) {

+	GDISP_LLD(write_index)(lcdReg);

+	GDISP_LLD(write_data)(lcdRegValue);

+}

 

-	palSetBusMode(&busD, PAL_MODE_STM32_ALTERNATE_PUSHPULL );

-	palSetBusMode(&busE, PAL_MODE_STM32_ALTERNATE_PUSHPULL );

+static __inline void lld_lcdWriteStreamStart(void) {

+	GDISP_REG = 0x0022; 

+}

+	

+static __inline void lld_lcdWriteStreamStop(void) {

 

-	// const unsigned char FSMC_Bank = 0;

-	const unsigned char FSMC_Bank = 6;

+}

 

-	/* FSMC timing */

-	FSMC_Bank1->BTCR[FSMC_Bank+1] = (10) | (10 << 8) | (10 << 16);

+static __inline void lld_lcdWriteStream(uint16_t *buffer, uint16_t size) {

+	uint16_t i;

 

-	/* Bank1 NOR/SRAM control register configuration

-	 * This is actually not needed as already set by default after reset */

-	FSMC_Bank1->BTCR[FSMC_Bank] = FSMC_BCR1_MWID_0 | FSMC_BCR1_WREN | FSMC_BCR1_MBKEN;

-#endif

+	for(i = 0; i < size; i++)

+		GDISP_RAM = buffer[i];

+}

+

+static __inline void lld_lcdReadStreamStart(void) {

+	GDISP_REG = 0x0022;

+}

+

+static __inline void lld_lcdReadStreamStop(void) {

+

+}

+

+static __inline void lld_lcdReadStream(uint16_t *buffer, size_t size) {

+	uint16_t i;

+	volatile uint16_t dummy;

+

+	dummy = GDISP_RAM; /* throw away first value read */

+	(void)dummy;

+

+	for(i = 0; i < size; i++)

+		buffer[i] = GDISP_RAM;

+}

+

+static __inline uint16_t lld_lcdReadReg(uint16_t lcdReg) {

+	volatile uint16_t dummy;

 

-	palSetPadMode(GPIOE, GPIOE_TFT_RST, PAL_MODE_OUTPUT_PUSHPULL);

-	palSetPad(GPIOE, GPIOE_TFT_RST);

+	GDISP_LLD(write_index)(lcdReg);

 

-	uint32_t DISPLAY_CODE = lld_lcdReadReg(0);

+	/* fix this! */

+	//dummy = GDISP_LLD(read_data);

+	dummy = GDISP_RAM;

+	(void)dummy;

 

-	lld_lcdWriteReg(0x0000, 0x0001); //start Int. osc

+	/* fix this! */

+	//return GDISP_LLD(read_data);

+	return GDISP_RAM;

+}

+

+bool_t GDISP_LLD(init)(void) {

+	/* Initialise your display */

+	GDISP_LLD(init_board)();

+

+	/* Hardware reset */

+	GDISP_LLD(setpin_reset)(TRUE);

+	lld_lcdDelay(1000);

+	GDISP_LLD(setpin_reset)(FALSE);

+	lld_lcdDelay(1000);

+

+    DISPLAY_CODE = lld_lcdReadReg(0);

+    lld_lcdWriteReg(0x0000, 0x0001); //start Int. osc

     lld_lcdDelay(500);

     lld_lcdWriteReg(0x0001, 0x0100); //Set SS bit (shift direction of outputs is from S720 to S1)

     lld_lcdWriteReg(0x0002, 0x0700); //select  the line inversion

-	lld_lcdWriteReg(0x0003, 0x1038); //Entry mode(Horizontal : increment,Vertical : increment, AM=1)

+    lld_lcdWriteReg(0x0003, 0x1038); //Entry mode(Horizontal : increment,Vertical : increment, AM=1)

     lld_lcdWriteReg(0x0004, 0x0000); //Resize control(No resizing)

     lld_lcdWriteReg(0x0008, 0x0202); //front and back porch 2 lines

     lld_lcdWriteReg(0x0009, 0x0000); //select normal scan

@@ -126,13 +186,12 @@ bool_t GDISP_LLD(init)(void) {
     lld_lcdWriteReg(0x0051, 0x00EF); //Horizontal GRAM end Position

     lld_lcdWriteReg(0x0052, 0x0000); //Vertical GRAM Start Position

     lld_lcdWriteReg(0x0053, 0x013F); //Vertical GRAM end Position

-

-	switch (DISPLAY_CODE) {

+	switch (DISPLAY_CODE) {   

 		case 0x9320:

-			lld_lcdWriteReg(0x0060, 0x2700); //starts scanning from G1, and 320 drive lines

-			break;

-		case 0x9325:

-			lld_lcdWriteReg(0x0060, 0xA700); //starts scanning from G1, and 320 drive lines

+        	lld_lcdWriteReg(0x0060, 0x2700); //starts scanning from G1, and 320 drive lines

+        	break;

+      	case 0x9325:

+     		lld_lcdWriteReg(0x0060, 0xA700); //starts scanning from G1, and 320 drive lines

 			break;

 	}

 

@@ -147,64 +206,67 @@ bool_t GDISP_LLD(init)(void) {
     lld_lcdWriteReg(0x0007, 0x0173); //display On

 

     /* Initialise the GDISP structure */

-	GDISP.Width = GDISP_SCREEN_WIDTH;

-	GDISP.Height = GDISP_SCREEN_HEIGHT;

-	GDISP.Orientation = GDISP_ROTATE_0;

-	GDISP.Powermode = powerOn;

-	GDISP.Backlight = 100;

-	GDISP.Contrast = 50;

-	#if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP

-		GDISP.clipx0 = 0;

-		GDISP.clipy0 = 0;

-		GDISP.clipx1 = GDISP.Width;

-		GDISP.clipy1 = GDISP.Height;

-	#endif

+    GDISP.Width = GDISP_SCREEN_WIDTH;

+    GDISP.Height = GDISP_SCREEN_HEIGHT;

+    GDISP.Orientation = GDISP_ROTATE_0;

+    GDISP.Powermode = powerOn;

+    GDISP.Backlight = 100;

+    GDISP.Contrast = 50;

+    #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP

+	GDISP.clipx0 = 0;

+	GDISP.clipy0 = 0;

+	GDISP.clipx1 = GDISP.Width;

+	GDISP.clipy1 = GDISP.Height;

+    #endif

+

 	return TRUE;

 }

 

-/**

- * @brief   Draws a pixel on the display.

- *

- * @param[in] x        X location of the pixel

- * @param[in] y        Y location of the pixel

- * @param[in] color    The color of the pixel

- *

- * @notapi

- */

-void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) {

-	#if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP

-		if (x < GDISP.clipx0 || y < GDISP.clipy0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return;

-	#endif

+static void lld_lcdSetCursor(uint16_t x, uint16_t y) {

+    uint32_t addr;

+

+    addr = y * 0x100 + x;

+

+    lld_lcdWriteReg(0x0020, addr & 0xff);   /* low addr */

+    lld_lcdWriteReg(0x0021, (addr >> 8) & 0x1ff); /* high addr */

+}

+

+static void lld_lcdSetViewPort(uint16_t x, uint16_t y, uint16_t cx, uint16_t cy) {

+	switch(GDISP.Orientation) {

+		case GDISP_ROTATE_0:

+			lld_lcdWriteReg(0x0050, x - 1);

+			lld_lcdWriteReg(0x0051, x + cx - 2);

+			lld_lcdWriteReg(0x0052, y - 1);

+			lld_lcdWriteReg(0x0053, y + cy - 2);

+			break;

+

+		case GDISP_ROTATE_90:

+			break;

+

+		case GDISP_ROTATE_180:

+			break;

+

+		case GDISP_ROTATE_270:

+			break;

+

+	}

+

 	lld_lcdSetCursor(x, y);

-	lld_lcdWriteReg(0x0022, color);

 }

 

-/* ---- Optional Routines ---- */

-/*

-	All the below routines are optional.

-	Defining them will increase speed but everything

-	will work if they are not defined.

-	If you are not using a routine - turn it off using

-	the appropriate GDISP_HARDWARE_XXXX macro.

-	Don't bother coding for obvious similar routines if

-	there is no performance penalty as the emulation software

-	makes a good job of using similar routines.

-		eg. If gfillarea() is defined there is little

-			point in defining clear() unless the

-			performance bonus is significant.

-	For good performance it is suggested to implement

-		fillarea() and blitarea().

-*/

+static __inline void lld_lcdResetViewPort(void) { 

+	/* ToDo */

+}

+

+void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) {

+    #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP

+        if (x < GDISP.clipx0 || y < GDISP.clipy0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return;

+    #endif

+    lld_lcdSetCursor(x, y);

+    lld_lcdWriteReg(0x0022, color);

+}

 

 #if GDISP_HARDWARE_CLEARS || defined(__DOXYGEN__)

-	/**

-	 * @brief   Clear the display.

-	 * @note    Optional - The high level driver can emulate using software.

-	 *

-	 * @param[in] color    The color of the pixel

-	 *

-	 * @notapi

-	 */

 	void GDISP_LLD(clear)(color_t color) {

 	    unsigned i;

 

@@ -219,16 +281,6 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) {
 #endif

 

 #if GDISP_HARDWARE_FILLS || defined(__DOXYGEN__)

-	/**

-	 * @brief   Fill an area with a color.

-	 * @note    Optional - The high level driver can emulate using software.

-	 *

-	 * @param[in] x, y     The start filled area

-	 * @param[in] cx, cy   The width and height to be filled

-	 * @param[in] color    The color of the fill

-	 *

-	 * @notapi

-	 */

 	void GDISP_LLD(fillarea)(coord_t x, coord_t y, coord_t cx, coord_t cy, color_t color) {

 		#if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP

 			if (x < GDISP.clipx0) { cx -= GDISP.clipx0 - x; x = GDISP.clipx0; }

@@ -251,18 +303,6 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) {
 #endif

 

 #if GDISP_HARDWARE_BITFILLS || defined(__DOXYGEN__)

-	/**

-	 * @brief   Fill an area with a bitmap.

-	 * @note    Optional - The high level driver can emulate using software.

-	 *

-	 * @param[in] x, y     The start filled area

-	 * @param[in] cx, cy   The width and height to be filled

-	 * @param[in] srcx, srcy   The bitmap position to start the fill from

-	 * @param[in] srccx    The width of a line in the bitmap.

-	 * @param[in] buffer   The pixels to use to fill the area.

-	 *

-	 * @notapi

-	 */

 	void GDISP_LLD(blitareaex)(coord_t x, coord_t y, coord_t cx, coord_t cy, coord_t srcx, coord_t srcy, coord_t srccx, const pixel_t *buffer) {

 		coord_t endx, endy;

 		unsigned lg;

@@ -292,15 +332,6 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) {
 #endif

 

 #if (GDISP_NEED_PIXELREAD && GDISP_HARDWARE_PIXELREAD) || defined(__DOXYGEN__)

-	/**

-	 * @brief   Get the color of a particular pixel.

-	 * @note    Optional.

-	 * @note    If x,y is off the screen, the result is undefined.

-	 *

-	 * @param[in] x, y     The start of the text

-	 *

-	 * @notapi

-	 */

 	color_t GDISP_LLD(getpixelcolor)(coord_t x, coord_t y) {

 		color_t color;

 

@@ -321,19 +352,6 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) {
 #endif

 

 #if (GDISP_NEED_SCROLL && GDISP_HARDWARE_SCROLL) || defined(__DOXYGEN__)

-	/**

-	 * @brief   Scroll vertically a section of the screen.

-	 * @note    Optional.

-	 * @note    If x,y + cx,cy is off the screen, the result is undefined.

-	 * @note    If lines is >= cy, it is equivelent to a area fill with bgcolor.

-	 *

-	 * @param[in] x, y     The start of the area to be scrolled

-	 * @param[in] cx, cy   The size of the area to be scrolled

-	 * @param[in] lines    The number of lines to scroll (Can be positive or negative)

-	 * @param[in] bgcolor  The color to fill the newly exposed area.

-	 *

-	 * @notapi

-	 */

 	void GDISP_LLD(verticalscroll)(coord_t x, coord_t y, coord_t cx, coord_t cy, int lines, color_t bgcolor) {

 		static color_t buf[((GDISP_SCREEN_HEIGHT > GDISP_SCREEN_WIDTH ) ? GDISP_SCREEN_HEIGHT : GDISP_SCREEN_WIDTH)];

 		coord_t row0, row1;

@@ -387,25 +405,6 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) {
 #endif

 

 #if (GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL) || defined(__DOXYGEN__)

-	/**

-	 * @brief   Driver Control

-	 * @details	Unsupported control codes are ignored.

-	 * @note	The value parameter should always be typecast to (void *).

-	 * @note	There are some predefined and some specific to the low level driver.

-	 * @note	GDISP_CONTROL_POWER			- Takes a gdisp_powermode_t

-	 * 			GDISP_CONTROL_ORIENTATION	- Takes a gdisp_orientation_t

-	 * 			GDISP_CONTROL_BACKLIGHT -	 Takes an int from 0 to 100. For a driver

-	 * 											that only supports off/on anything other

-	 * 											than zero is on.

-	 * 			GDISP_CONTROL_CONTRAST		- Takes an int from 0 to 100.

-	 * 			GDISP_CONTROL_LLD			- Low level driver control constants start at

-	 * 											this value.

-	 *

-	 * @param[in] what		What to do.

-	 * @param[in] value		The value to use (always cast to a void *).

-	 *

-	 * @notapi

-	 */

 	void GDISP_LLD(control)(unsigned what, void *value) {

 		switch(what) {

 			case GDISP_CONTROL_POWER:

@@ -436,7 +435,7 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) {
 						lld_lcdWriteReg(0x0013, 0x0E00); /* VDV[4:0] for VCOM amplitude */

 						lld_lcdWriteReg(0x0029, 0x0009); /* VCM[4:0] for VCOMH */

 						lld_lcdDelay(500);

-						lld_lcdWriteReg(0x0007, 0x0173); /* 262K color and display ON */						

+						lld_lcdWriteReg(0x0007, 0x0173); /* 262K color and display ON */	

 						if(GDISP.Powermode != powerSleep || GDISP.Powermode != powerDeepSleep)

 							GDISP_LLD(init)();

 						break;

@@ -448,7 +447,7 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) {
                         lld_lcdWriteReg(0x0012, 0x0000); /* VREG1OUT voltage */

                         lld_lcdWriteReg(0x0013, 0x0000); /* VDV[4:0] for VCOM amplitude */

                         lld_lcdDelay(2000); /* Dis-charge capacitor power voltage */

-                        lld_lcdWriteReg(0x0010, 0x0002); /* SAP, BT[3:0], APE, AP, DSTB, SLP */						

+                        lld_lcdWriteReg(0x0010, 0x0002); /* SAP, BT[3:0], APE, AP, DSTB, SLP */				

 						break;

 

 					case powerDeepSleep:

@@ -525,3 +524,4 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) {
 

 #endif /* GFX_USE_GDISP */

 /** @} */

+