Add driver for ED060SC4 e-ink display panel

8 files changed, 946 insertions, 0 deletions

diff --git a/drivers/gdisp/ED060SC4/ed060sc4.h b/drivers/gdisp/ED060SC4/ed060sc4.h
new file mode 100644
index 00000000..8a38f135
--- /dev/null
+++ b/drivers/gdisp/ED060SC4/ed060sc4.h
@@ -0,0 +1,16 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#ifndef _ED060SC4_H_
+#define _ED060SC4_H_
+
+#include "gfx.h"
+
+/* Control command for flushing all data to display. */
+#define GDISP_CONTROL_FLUSH (GDISP_CONTROL_LLD + 0)
+
+#endif
diff --git a/drivers/gdisp/ED060SC4/example_schematics.png b/drivers/gdisp/ED060SC4/example_schematics.png
new file mode 100644
index 00000000..0d9d095f
--- /dev/null
+++ b/drivers/gdisp/ED060SC4/example_schematics.png
diff --git a/drivers/gdisp/ED060SC4/gdisp_lld.c b/drivers/gdisp/ED060SC4/gdisp_lld.c
new file mode 100644
index 00000000..fcc03944
--- /dev/null
+++ b/drivers/gdisp/ED060SC4/gdisp_lld.c
@@ -0,0 +1,606 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+/* Low-level E-ink panel driver routines for ED060SC4. */
+
+#include "gfx.h"
+#include "ed060sc4.h"
+
+#if GFX_USE_GDISP
+
+#include "gdisp/lld/emulation.c"
+
+/* =================================
+ *      Default configuration
+ * ================================= */
+
+#ifndef GDISP_SCREEN_HEIGHT
+#       define GDISP_SCREEN_HEIGHT 600
+#endif
+
+#ifndef GDISP_SCREEN_WIDTH
+#       define GDISP_SCREEN_WIDTH 800
+#endif
+
+/* Number of pixels per byte */
+#ifndef EINK_PPB
+#       define EINK_PPB 4
+#endif
+
+/* Delay for generating clock pulses.
+ * Unit is approximate clock cycles of the CPU (0 to 15).
+ * This should be atleast 50 ns.
+ */
+#ifndef EINK_CLOCKDELAY
+#       define EINK_CLOCKDELAY 0
+#endif
+
+/* Width of one framebuffer block.
+ * Must be divisible by EINK_PPB and evenly divide GDISP_SCREEN_WIDTH. */
+#ifndef EINK_BLOCKWIDTH
+#       define EINK_BLOCKWIDTH 20
+#endif
+
+/* Height of one framebuffer block.
+ * Must evenly divide GDISP_SCREEN_WIDTH. */
+#ifndef EINK_BLOCKHEIGHT
+#       define EINK_BLOCKHEIGHT 20
+#endif
+
+/* Number of block buffers to use for framebuffer emulation. */
+#ifndef EINK_NUMBUFFERS
+#       define EINK_NUMBUFFERS 40
+#endif
+
+/* Do a "blinking" clear, i.e. clear to opposite polarity first.
+ * This reduces the image persistence. */
+#ifndef EINK_BLINKCLEAR
+#       define EINK_BLINKCLEAR TRUE
+#endif
+
+/* Number of passes to use when clearing the display */
+#ifndef EINK_CLEARCOUNT
+#       define EINK_CLEARCOUNT 10
+#endif
+
+/* Number of passes to use when writing to the display */
+#ifndef EINK_WRITECOUNT
+#       define EINK_WRITECOUNT 4
+#endif
+
+/* ====================================
+ *      Lower level driver functions
+ * ==================================== */
+
+#include "gdisp_lld_board.h"
+
+/** Delay between signal changes, to give time for IO pins to change state. */
+static inline void clockdelay()
+{
+	#if EINK_CLOCKDELAY & 1
+	asm("nop");
+	#endif
+	#if EINK_CLOCKDELAY & 2
+	asm("nop");
+	asm("nop");
+	#endif
+	#if EINK_CLOCKDELAY & 4
+	asm("nop");
+	asm("nop");
+	asm("nop");
+	asm("nop");
+	#endif
+	#if EINK_CLOCKDELAY & 8
+	asm("nop");
+	asm("nop");
+	asm("nop");
+	asm("nop");
+	asm("nop");
+	asm("nop");
+	asm("nop");
+	asm("nop");
+	#endif
+}
+
+/** Fast vertical clock pulse for gate driver, used during initializations */
+static void vclock_quick()
+{
+	setpin_ckv(TRUE);
+	eink_delay(1);
+	setpin_ckv(FALSE);
+	eink_delay(4);
+}
+
+/** Horizontal clock pulse for clocking data into source driver */
+static void hclock()
+{
+	clockdelay();
+	setpin_cl(TRUE);
+	clockdelay();
+	setpin_cl(FALSE);
+}
+
+/** Start a new vertical gate driver scan from top.
+ * Note: Does not clear any previous bits in the shift register,
+ *       so you should always scan through the whole display before
+ *       starting a new scan.
+ */
+static void vscan_start()
+{
+	setpin_gmode(TRUE);
+	vclock_quick();
+	setpin_spv(FALSE);
+	vclock_quick();
+	setpin_spv(TRUE);
+	vclock_quick();
+}
+
+/** Waveform for strobing a row of data onto the display.
+ * Attempts to minimize the leaking of color to other rows by having
+ * a long idle period after a medium-length strobe period.
+ */
+static void vscan_write()
+{
+	setpin_ckv(TRUE);
+	setpin_oe(TRUE);
+	eink_delay(5);
+	setpin_oe(FALSE);
+	setpin_ckv(FALSE);
+	eink_delay(200);
+}
+
+/** Waveform used when clearing the display. Strobes a row of data to the
+ * screen, but does not mind some of it leaking to other rows.
+ */
+static void vscan_bulkwrite()
+{
+	setpin_ckv(TRUE);
+	eink_delay(20);
+	setpin_ckv(FALSE);
+	eink_delay(200);
+}
+
+/** Waveform for skipping a vertical row without writing anything.
+ * Attempts to minimize the amount of change in any row.
+ */
+static void vscan_skip()
+{
+	setpin_ckv(TRUE);
+	eink_delay(1);
+	setpin_ckv(FALSE);
+	eink_delay(100);
+}
+
+/** Stop the vertical scan. The significance of this escapes me, but it seems
+ * necessary or the next vertical scan may be corrupted.
+ */
+static void vscan_stop()
+{
+	setpin_gmode(FALSE);
+	vclock_quick();
+	vclock_quick();
+	vclock_quick();
+	vclock_quick();
+	vclock_quick();
+}
+
+/** Start updating the source driver data (from left to right). */
+static void hscan_start()
+{
+	/* Disable latching and output enable while we are modifying the row. */
+	setpin_le(FALSE);
+	setpin_oe(FALSE);
+	
+	/* The start pulse should remain low for the duration of the row. */
+	setpin_sph(FALSE);
+}
+
+/** Write data to the horizontal row. */
+static void hscan_write(const uint8_t *data, int count)
+{
+	while (count--)
+	{
+		/* Set the next byte on the data pins */
+		setpins_data(*data++);
+		
+		/* Give a clock pulse to the shift register */
+		hclock();
+	}
+}
+
+/** Finish and transfer the row to the source drivers.
+ * Does not set the output enable, so the drivers are not yet active. */
+static void hscan_stop()
+{
+	/* End the scan */
+	setpin_sph(TRUE);
+	hclock();
+	
+	/* Latch the new data */
+	setpin_le(TRUE);
+	clockdelay();
+	setpin_le(FALSE);
+}
+
+/** Turn on the power to the E-Ink panel, observing proper power sequencing. */
+static void power_on()
+{
+	unsigned i;
+	
+	/* First the digital power supply and signal levels. */
+	setpower_vdd(TRUE);
+	setpin_le(FALSE);
+	setpin_oe(FALSE);
+	setpin_cl(FALSE);
+	setpin_sph(TRUE);
+	setpins_data(0);
+	setpin_ckv(FALSE);
+	setpin_gmode(FALSE);
+	setpin_spv(TRUE);
+	
+	/* Min. 100 microsecond delay after digital supply */
+	gfxSleepMicroseconds(100);
+	
+	/* Then negative voltages and min. 1000 microsecond delay. */
+	setpower_vneg(TRUE);
+	gfxSleepMicroseconds(1000);
+	
+	/* Finally the positive voltages. */
+	setpower_vpos(TRUE);
+	
+	/* Clear the vscan shift register */
+	vscan_start();
+	for (i = 0; i < GDISP_SCREEN_HEIGHT; i++)
+		vclock_quick();
+	vscan_stop();
+}
+
+/** Turn off the power, observing proper power sequencing. */
+static void power_off()
+{
+	/* First the high voltages */
+	setpower_vpos(FALSE);
+	setpower_vneg(FALSE);
+	
+	/* Wait for any capacitors to drain */
+	gfxSleepMilliseconds(100);
+	
+	/* Then put all signals and digital supply to ground. */
+	setpin_le(FALSE);
+	setpin_oe(FALSE);
+	setpin_cl(FALSE);
+	setpin_sph(FALSE);
+	setpins_data(0);
+	setpin_ckv(FALSE);
+	setpin_gmode(FALSE);
+	setpin_spv(FALSE);
+	setpower_vdd(FALSE);
+}
+
+/* ====================================
+ *      Framebuffer emulation layer
+ * ==================================== */
+
+#if EINK_PPB == 4
+#define PIXELMASK 3
+#define PIXEL_WHITE 2
+#define PIXEL_BLACK 1
+#define BYTE_WHITE 0xAA
+#define BYTE_BLACK 0x55
+#else
+#error Unsupported EINK_PPB value.
+#endif
+
+#if GDISP_SCREEN_HEIGHT % EINK_BLOCKHEIGHT != 0
+#error GDISP_SCREEN_HEIGHT must be evenly divisible by EINK_BLOCKHEIGHT
+#endif
+
+#if GDISP_SCREEN_WIDTH % EINK_BLOCKWIDTH != 0
+#error GDISP_SCREEN_WIDTH must be evenly divisible by EINK_BLOCKWIDTH
+#endif
+
+#if EINK_BLOCKWIDTH % EINK_PPB != 0
+#error EINK_BLOCKWIDTH must be evenly divisible by EINK_PPB
+#endif
+
+#if EINK_NUMBUFFERS > 254
+#error EINK_NUMBUFFERS must be at most 254.
+#endif
+
+#define BLOCKS_Y (GDISP_SCREEN_HEIGHT / EINK_BLOCKHEIGHT)
+#define BLOCKS_X (GDISP_SCREEN_WIDTH / EINK_BLOCKWIDTH)
+#define WIDTH_BYTES (EINK_BLOCKWIDTH / EINK_PPB)
+
+/* Buffers that store the data for a small area of the display. */
+typedef struct {
+	uint8_t data[EINK_BLOCKHEIGHT][WIDTH_BYTES];
+} block_t;
+
+static uint8_t g_next_block; /* Index of the next free block buffer. */
+static block_t g_blocks[EINK_NUMBUFFERS];
+
+/* Map that stores the buffers associated to each area of the display.
+ * Value of 0 means that the block is not allocated.
+ * Other values are the index in g_blocks + 1.
+ */
+static uint8_t g_blockmap[BLOCKS_Y][BLOCKS_X]; 
+
+/** Check if the row contains any allocated blocks. */
+static bool_t blocks_on_row(unsigned by)
+{
+	unsigned bx;
+	for (bx = 0; bx < BLOCKS_X; bx++)
+	{
+		if (g_blockmap[by][bx] != 0)
+		{
+			return TRUE;
+		}
+	}
+	return FALSE;
+}
+
+/** Write out a block row. */
+static void write_block_row(unsigned by)
+{
+	unsigned bx, dy, dx;
+	for (dy = 0; dy < EINK_BLOCKHEIGHT; dy++)
+	{
+		hscan_start();
+		for (bx = 0; bx < BLOCKS_X; bx++)
+		{
+			if (g_blockmap[by][bx] == 0)
+			{
+				for (dx = 0; dx < WIDTH_BYTES; dx++)
+				{
+					const uint8_t dummy = 0;
+					hscan_write(&dummy, 1);
+				}
+			}
+			else
+			{
+				block_t *block = &g_blocks[g_blockmap[by][bx] - 1];
+				hscan_write(&block->data[dy][0], WIDTH_BYTES);
+			}
+		}
+		hscan_stop();
+		
+		vscan_write();
+	}
+}
+
+/** Clear the block map, i.e. deallocate all blocks */
+static void clear_block_map()
+{
+	unsigned bx, by;
+	for (by = 0; by < BLOCKS_Y; by++)
+	{
+		for (bx = 0; bx < BLOCKS_X; bx++)
+		{
+			g_blockmap[by][bx] = 0;
+		}
+	}
+	
+	g_next_block = 0;
+}
+
+/** Flush all the buffered rows to display. */
+static void flush_buffers()
+{
+	unsigned by, dy, i;
+	
+	for (i = 0; i < EINK_WRITECOUNT; i++)
+	{
+		vscan_start();
+		
+		for (by = 0; by < BLOCKS_Y; by++)
+		{
+			if (!blocks_on_row(by))
+			{
+				/* Skip the whole row of blocks. */
+				for (dy = 0; dy < EINK_BLOCKHEIGHT; dy++)
+				{
+					vscan_skip();
+				}
+			}
+			else
+			{
+				/* Write out the blocks. */
+				write_block_row(by);
+			}
+		}
+		
+		vscan_stop();
+	}
+	
+	clear_block_map();
+}
+
+/** Initialize a newly allocated block. */
+static void zero_block(block_t *block)
+{
+	unsigned dx, dy;
+	for (dy = 0; dy < EINK_BLOCKHEIGHT; dy++)
+	{
+		for (dx = 0; dx < WIDTH_BYTES; dx++)
+		{
+			block->data[dy][dx] = 0;
+		}
+	}
+}
+
+/** Allocate a buffer
+ * Automatically flushes if all buffers are full. */
+static block_t *alloc_buffer(unsigned bx, unsigned by)
+{
+	block_t *result;
+	if (g_blockmap[by][bx] == 0)
+	{
+		if (g_next_block >= EINK_NUMBUFFERS)
+		{
+			flush_buffers();
+		}
+		
+		result = &g_blocks[g_next_block];
+		g_blockmap[by][bx] = g_next_block + 1;
+		g_next_block++;
+		zero_block(result);
+		return result;
+	}
+	else
+	{
+		result = &g_blocks[g_blockmap[by][bx] - 1];
+		return result;
+	}
+}
+
+/* ===============================
+ *         Public functions
+ * =============================== */
+
+bool_t gdisp_lld_init(void)
+{
+	init_board();
+	
+	/* Make sure that all the pins are in "off" state.
+	 * Having any pin high could cause voltage leaking to the
+	 * display, which in turn causes the image to leak slowly away.
+	 */
+	power_off();
+	
+	clear_block_map();
+	
+	/* Initialize the global GDISP structure */
+	GDISP.Width = GDISP_SCREEN_WIDTH;
+	GDISP.Height = GDISP_SCREEN_HEIGHT;
+	GDISP.Orientation = GDISP_ROTATE_0;
+	GDISP.Powermode = powerOff;
+	GDISP.Backlight = 0;
+	GDISP.Contrast = 0;
+	#if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP
+	GDISP.clipx0 = 0;
+	GDISP.clipy0 = 0;
+	GDISP.clipx1 = GDISP.Width;
+	GDISP.clipy1 = GDISP.Height;
+	#endif
+	
+	return TRUE;
+}
+
+void gdisp_lld_draw_pixel(coord_t x, coord_t y, color_t color)
+{
+	block_t *block;
+	uint8_t byte;
+	unsigned bx, by, dx, dy;
+	uint8_t bitpos;
+	
+	bx = x / EINK_BLOCKWIDTH;
+	by = y / EINK_BLOCKHEIGHT;
+	dx = x % EINK_BLOCKWIDTH;
+	dy = y % EINK_BLOCKHEIGHT;
+	
+	if (bx < 0 || bx >= BLOCKS_X || by < 0 || by >= BLOCKS_Y)
+		return;
+	
+	block = alloc_buffer(bx, by);
+	
+	bitpos = (6 - 2 * (dx % EINK_PPB));
+	byte = block->data[dy][dx / EINK_PPB];
+	byte &= ~(PIXELMASK << bitpos);
+	if (color)
+	{
+		byte |= PIXEL_WHITE << bitpos;
+	}
+	else
+	{
+		byte |= PIXEL_BLACK << bitpos;   
+	}
+	block->data[dy][dx / EINK_PPB] = byte;
+}
+
+#if !GDISP_NEED_CONTROL
+#error You must enable GDISP_NEED_CONTROL for the E-Ink driver.
+#endif
+
+void gdisp_lld_control(unsigned what, void *value) {
+	gdisp_powermode_t newmode;
+	
+	switch(what)
+	{
+		case GDISP_CONTROL_POWER:
+			newmode = (gdisp_powermode_t)value;
+			
+			if (GDISP.Powermode == newmode)
+				return;
+			
+			if (newmode == powerOn)
+			{
+				power_on();
+			}
+			else
+			{
+				flush_buffers();
+				power_off();
+			}
+			GDISP.Powermode = newmode;
+			break;
+			
+		case GDISP_CONTROL_FLUSH:
+			flush_buffers();
+			break;
+	}
+}
+
+/* ===============================
+ *       Accelerated routines
+ * =============================== */
+
+#if GDISP_HARDWARE_CLEARS
+
+static void subclear(color_t color)
+{
+	unsigned x, y;
+	uint8_t byte;
+	
+	hscan_start();
+	byte = color ? BYTE_WHITE : BYTE_BLACK;
+	for (x = 0; x < GDISP_SCREEN_WIDTH; x++)
+	{
+		hscan_write(&byte, 1);
+	}
+	hscan_stop();
+	
+	setpin_oe(TRUE);
+	vscan_start();
+	for (y = 0; y < GDISP_SCREEN_HEIGHT; y++)
+	{
+		vscan_bulkwrite();
+	}
+	vscan_stop();
+	setpin_oe(FALSE);
+}
+
+void gdisp_lld_clear(color_t color)
+{
+	unsigned i;
+	clear_block_map();
+	
+	if (EINK_BLINKCLEAR)
+	{
+		subclear(!color);
+		gfxSleepMilliseconds(50);
+	}
+	
+	for (i = 0; i < EINK_CLEARCOUNT; i++)
+	{
+		subclear(color);
+		gfxSleepMilliseconds(10);
+	}
+	
+}
+#endif
+
+#endif
diff --git a/drivers/gdisp/ED060SC4/gdisp_lld.mk b/drivers/gdisp/ED060SC4/gdisp_lld.mk
new file mode 100644
index 00000000..d5c1492f
--- /dev/null
+++ b/drivers/gdisp/ED060SC4/gdisp_lld.mk
@@ -0,0 +1,2 @@
+GFXSRC += $(GFXLIB)/drivers/gdisp/ED060SC4/gdisp_lld.c
+GFXINC += $(GFXLIB)/drivers/gdisp/ED060SC4
diff --git a/drivers/gdisp/ED060SC4/gdisp_lld_board_example.h b/drivers/gdisp/ED060SC4/gdisp_lld_board_example.h
new file mode 100644
index 00000000..98f05ee8
--- /dev/null
+++ b/drivers/gdisp/ED060SC4/gdisp_lld_board_example.h
@@ -0,0 +1,127 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+/* Board interface definitions for ED060SC4 PrimeView E-ink panel.
+ * 
+ * This file corresponds to the connections shown in example_schematics.png,
+ * and is designed to interface with ChibiOS/RT.
+ * 
+ * Please note that this file has never been tested in exactly this pin
+ * configuration, because the actual boards I have are slightly different.
+ */
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+#include <hal.h>
+
+/*
+ * IO pins assignments.
+ */
+#define GPIOB_EINK_VDD      0
+#define GPIOB_EINK_GMODE    1
+#define GPIOB_EINK_SPV      2
+#define GPIOB_EINK_CKV      3
+#define GPIOB_EINK_CL       4
+#define GPIOB_EINK_LE       5
+#define GPIOB_EINK_OE       6
+#define GPIOB_EINK_SPH      7
+#define GPIOB_EINK_D0       8
+#define GPIOB_EINK_D1       9
+#define GPIOB_EINK_D2       10
+#define GPIOB_EINK_D3       11
+#define GPIOB_EINK_D4       12
+#define GPIOB_EINK_D5       13
+#define GPIOB_EINK_D6       14
+#define GPIOB_EINK_D7       15
+
+#define GPIOC_SMPS_CTRL     13
+#define GPIOC_VPOS_CTRL     14
+#define GPIOC_VNEG_CTRL     15
+
+
+/* Set up IO pins for the panel connection. */
+static inline void init_board(void) {
+	/* Main SMPS power control, active low
+	 * (open collector so that MOSFET gate can be pulled up to Vbat) */
+	palWritePad(GPIOC, GPIOC_SMPS_CTRL, true);
+	palSetPadMode(GPIOC, GPIOC_SMPS_CTRL, PAL_MODE_OUTPUT_OPENDRAIN);
+	
+	/* Power control for the positive & negative side */
+	palWritePad(GPIOC, GPIOC_VPOS_CTRL, false);
+	palSetPadMode(GPIOC, GPIOC_VPOS_CTRL, PAL_MODE_OUTPUT_PUSHPULL);
+	palWritePad(GPIOC, GPIOC_VNEG_CTRL, false);
+	palSetPadMode(GPIOC, GPIOC_VNEG_CTRL, PAL_MODE_OUTPUT_PUSHPULL);
+	
+	/* Main data bus */
+	palWritePort(GPIOB, 0);
+	palSetGroupMode(GPIOB, 0xFFFF, 0, PAL_MODE_OUTPUT_PUSHPULL);
+}
+
+/* Delay for display waveforms. Should be an accurate microsecond delay. */
+static void eink_delay(int us)
+{
+	halPolledDelay(US2RTT(us));
+}
+
+/* Turn the E-ink panel Vdd supply (+3.3V) on or off. */
+static inline void setpower_vdd(bool_t on) {
+	palWritePad(GPIOB, GPIOB_SMPS_CTRL, !on);
+	palWritePad(GPIOA, GPIOA_EINK_VDD, on);
+}
+
+/* Turn the E-ink panel negative supplies (-15V, -20V) on or off. */
+static inline void setpower_vneg(bool_t on) {
+	palWritePad(GPIOA, GPIOA_VNEG_CTRL, on);
+}
+
+/* Turn the E-ink panel positive supplies (-15V, -20V) on or off. */
+static inline void setpower_vpos(bool_t on) {
+	palWritePad(GPIOA, GPIOA_VPOS_CTRL, on);
+}
+
+/* Set the state of the LE (source driver Latch Enable) pin. */
+static inline void setpin_le(bool_t on) {
+	palWritePad(GPIOB, GPIOB_EINK_LE, on);
+}
+
+/* Set the state of the OE (source driver Output Enable) pin. */
+static inline void setpin_oe(bool_t on) {
+	palWritePad(GPIOB, GPIOB_EINK_OE, on);
+}
+
+/* Set the state of the CL (source driver Clock) pin. */
+static inline void setpin_cl(bool_t on) {
+	palWritePad(GPIOB, GPIOB_EINK_CL, on);
+}
+
+/* Set the state of the SPH (source driver Start Pulse Horizontal) pin. */
+static inline void setpin_sph(bool_t on) {
+	palWritePad(GPIOB, GPIOB_EINK_SPH, on);
+}
+
+/* Set the state of the D0-D7 (source driver Data) pins. */
+static inline void setpins_data(uint8_t value) {
+	palWriteGroup(GPIOB, 0xFF, GPIOB_EINK_D0, value);
+}
+
+/* Set the state of the CKV (gate driver Clock Vertical) pin. */
+static inline void setpin_ckv(bool_t on) {
+	palWritePad(GPIOB, GPIOB_EINK_CKV, on);
+}
+
+/* Set the state of the GMODE (gate driver Gate Mode) pin. */
+static inline void setpin_gmode(bool_t on) {
+	palWritePad(GPIOC, GPIOC_EINK_GMODE, on);
+}
+
+/* Set the state of the SPV (gate driver Start Pulse Vertical) pin. */
+static inline void setpin_spv(bool_t on) {
+	palWritePad(GPIOB, GPIOB_EINK_SPV, on);
+}
+
+#endif
diff --git a/drivers/gdisp/ED060SC4/gdisp_lld_board_template.h b/drivers/gdisp/ED060SC4/gdisp_lld_board_template.h
new file mode 100644
index 00000000..68129bf8
--- /dev/null
+++ b/drivers/gdisp/ED060SC4/gdisp_lld_board_template.h
@@ -0,0 +1,83 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+/* Board interface definitions for ED060SC4 PrimeView E-ink panel.
+ * 
+ * You should implement the following functions to define the interface to
+ * the panel on your board.
+ */
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+/* Set up IO pins for the panel connection. */
+static inline void init_board(void) {
+	#error Unimplemented
+}
+
+/* Delay for display waveforms. Should be an accurate microsecond delay. */
+static void eink_delay(int us)
+{
+	#error Unimplemented
+}
+
+/* Turn the E-ink panel Vdd supply (+3.3V) on or off. */
+static inline void setpower_vdd(bool_t on) {
+	#error Unimplemented
+}
+
+/* Turn the E-ink panel negative supplies (-15V, -20V) on or off. */
+static inline void setpower_vneg(bool_t on) {
+	#error Unimplemented
+}
+
+/* Turn the E-ink panel positive supplies (-15V, -20V) on or off. */
+static inline void setpower_vpos(bool_t on) {
+	#error Unimplemented
+}
+
+/* Set the state of the LE (source driver Latch Enable) pin. */
+static inline void setpin_le(bool_t on) {
+	#error Unimplemented
+}
+
+/* Set the state of the OE (source driver Output Enable) pin. */
+static inline void setpin_oe(bool_t on) {
+	#error Unimplemented
+}
+
+/* Set the state of the CL (source driver Clock) pin. */
+static inline void setpin_cl(bool_t on) {
+	#error Unimplemented
+}
+
+/* Set the state of the SPH (source driver Start Pulse Horizontal) pin. */
+static inline void setpin_sph(bool_t on) {
+	#error Unimplemented
+}
+
+/* Set the state of the D0-D7 (source driver Data) pins. */
+static inline void setpins_data(uint8_t value) {
+	#error Unimplemented
+}
+
+/* Set the state of the CKV (gate driver Clock Vertical) pin. */
+static inline void setpin_ckv(bool_t on) {
+	#error Unimplemented
+}
+
+/* Set the state of the GMODE (gate driver Gate Mode) pin. */
+static inline void setpin_gmode(bool_t on) {
+	#error Unimplemented
+}
+
+/* Set the state of the SPV (gate driver Start Pulse Vertical) pin. */
+static inline void setpin_spv(bool_t on) {
+	#error Unimplemented
+}
+
+#endif
diff --git a/drivers/gdisp/ED060SC4/gdisp_lld_config.h b/drivers/gdisp/ED060SC4/gdisp_lld_config.h
new file mode 100644
index 00000000..befd997c
--- /dev/null
+++ b/drivers/gdisp/ED060SC4/gdisp_lld_config.h
@@ -0,0 +1,27 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+/* Supported features of the driver for ED060SC4 PrimeView E-Ink panel. */
+
+#ifndef _GDISP_LLD_CONFIG_H
+#define _GDISP_LLD_CONFIG_H
+
+#if GFX_USE_GDISP
+
+#define GDISP_DRIVER_NAME               "ED060SC4"
+#define GDISP_HARDWARE_CLEARS           TRUE
+#define GDISP_HARDWARE_FILLS            FALSE
+#define GDISP_HARDWARE_BITFILLS         FALSE
+#define GDISP_HARDWARE_SCROLL           FALSE
+#define GDISP_HARDWARE_PIXELREAD        FALSE
+#define GDISP_HARDWARE_CONTROL          TRUE
+
+#define GDISP_PIXELFORMAT               GDISP_PIXELFORMAT_MONO
+
+#endif
+
+#endif
diff --git a/drivers/gdisp/ED060SC4/readme.txt b/drivers/gdisp/ED060SC4/readme.txt
new file mode 100644
index 00000000..5409d810
--- /dev/null
+++ b/drivers/gdisp/ED060SC4/readme.txt
@@ -0,0 +1,85 @@
+1. Introduction
+
+This is a driver for ED060SC4 800x600 e-ink display panel manufactured by
+Prime View. Note that this driver uses a direct connection to the panel from
+the processor; it does not use a separate controller chip between the processor
+and the panel.
+
+To use the driver, you need to be able to control the following signals from
+your processor:
+
+Gate driver: SPV, CKV, GMODE.
+Source driver: CL, LE, OE, SPH, D0-D7.
+Power supply: +-15V, +22V, -20V, digital Vdd
+
+The file "example_schematics.png" shows how to connect the signals to e.g. a
+STM32L151 microcontroller. It also includes an example circuit for providing
+the panel supply voltages.
+
+Note that the larger panels (such as the 800x600) consist of multiple segments
+with separate gate driver signals. These can be daisy chained as shown in the
+example schematic.
+
+
+
+
+2. Frame buffer emulation
+
+Because there is not enough memory to store a full frame buffer on the
+processor, this driver emulates a frame buffer by storing the display data in
+blocks. It will buffer up to EINK_NUMBUFFERS blocks and then write them to the
+screen. The following #defines control the buffering. Larger numbers will
+result in faster drawing, but also use more RAM on the processor:
+
+#define EINK_BLOCKWIDTH 20    // Width of a single block in buffer
+#define EINK_BLOCKHEIGHT 20   // Height of a single block in buffers
+#define EINK_NUMBUFFERS 40    // Number of blocks to buffer
+
+After drawing your images, you should flush the buffers using the following
+command:
+
+    #include <ed060sc4.h>
+    gdispControl(GDISP_CONTROL_FLUSH, 0);
+
+The buffers are also flushed whenever you turn the display off using:
+
+    gdispSetPowerMode(powerOff);
+
+
+
+3. Display clearing and writing waveforms
+
+This driver does not know the official Prime View waveforms for driving the
+display, mostly because those are trade secrets and not publicly available.
+Instead, it uses reverse engineered waveforms that are mostly functional.
+
+The following #defines control the waveforms:
+
+#define EINK_BLINKCLEAR TRUE      // Clear to opposite color first
+#define EINK_CLEARCOUNT 10        // Number of sweeps to clear the display
+#define EINK_WRITECOUNT 4         // Number of sweeps when writing to display
+
+Increasing the clearcount and writecount can improve contrast, but will also
+slow down the drawing and use more power.
+
+
+
+4. Clock speeds
+
+Because the driver bit bangs the display, the clock frequency of the processor
+is quite significant. This is controlled by EINK_CLOCKDELAY variable. Set it
+so that the delay is atleast 50 nanoseconds.
+
+
+
+5. Support for other kinds of panels
+
+Most of the Prime View panels should work using this driver, but only ED060SC4
+has been tested so far. Some points of consideration:
+
+- Some displays may use 4 bits per pixel. The driver currently assumes 2 bits
+  per pixel.
+- Larger displays may require some other way of daisy chaining than shown in
+  the example schematics.
+
+