SSD1306 board file for SAM7EX256 using UEXT connector

1 files changed, 212 insertions, 0 deletions

diff --git a/boards/base/Olimex-SAM7EX256-GE8/board_SSD1306.h b/boards/base/Olimex-SAM7EX256-GE8/board_SSD1306.h
new file mode 100644
index 00000000..137808da
--- /dev/null
+++ b/boards/base/Olimex-SAM7EX256-GE8/board_SSD1306.h
@@ -0,0 +1,212 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+#include "board_uext.h"
+
+// The various methods of driving the SPI interface
+#define SPI_METHOD_PIO		1
+#define SPI_METHOD_AT91		2
+#define SPI_METHOD_CHIBIOS	3			// ChibiOS SPI for AT91SAM7 requires patch 7675 or higher to work correctly
+
+// The various methods of driving the PIO interface
+#define PIO_METHOD_AT91		1
+#define PIO_METHOD_CHIBIOS	2			// ChibiOS PIO for the AT91SAM7 requires patch 7669 or higher to work correctly
+
+// What methods are we using in this file
+#define SPI_METHOD			SPI_METHOD_AT91
+#define PIO_METHOD			PIO_METHOD_AT91
+
+// If using SPI_METHOD_CHIBIOS or SPI_METHOD_AT91 then this must be defined for your CPU
+#define SPI_CONFIG_REGISTER		0x00000801			// For AT91SAM7:	8bit, CPOL=1, NCPHA = 0, ClockPhase=0, SCLK = 48Mhz/8 = 6MHz
+
+//---------------------------------------------------------------------
+
+#define PORT_RESET		UEXT_PORT_PIN5
+#define PIN_RESET		UEXT_PORTPIN_PIN5
+#define PORT_DC			UEXT_PORT_PIN6
+#define PIN_DC			UEXT_PORTPIN_PIN6
+
+#if PIO_METHOD == PIO_METHOD_AT91
+	#define PinIsOutput(port,pin)		((port)->PIO_OER = 1 << (pin), (port)->PIO_PER = 1 << (pin), (port)->PIO_MDDR = 1 << (pin), (port)->PIO_PPUDR = 1 << (pin))
+	#define PinSet(port,pin)			(port)->PIO_SODR = 1 << (pin)
+	#define PinClear(port,pin)			(port)->PIO_CODR = 1 << (pin)
+#elif PIO_METHOD == PIO_METHOD_CHIBIOS
+	#define PinIsOutput(port,pin)		palSetPadMode((port), (pin), PAL_MODE_OUTPUT_PUSHPULL)
+	#define PinSet(port,pin)			palSetPad((port), (pin))
+	#define PinClear(port,pin)			palClearPad((port), (pin))
+#else
+	#error "TLS8204 board file: Unsupported PIO method"
+#endif
+
+#if SPI_METHOD == SPI_METHOD_PIO
+
+	static void spi_delay(volatile unsigned long a) { while (a!=0) a--; }
+
+	static void spi_write(uint8_t data) {
+		uint8_t bit;
+
+		for(bit = 0x80; bit; bit >>= 1) {
+			if(data & bit)
+				PinSet(UEXT_SPI_MOSI_PORT, UEXT_SPI_MOSI_PORTPIN);
+			else
+				PinClear(UEXT_SPI_MOSI_PORT, UEXT_SPI_MOSI_PORTPIN);
+			spi_delay(1);
+			PinClear(UEXT_SPI_SCK_PORT, UEXT_SPI_SCK_PORTPIN);
+			spi_delay(1);
+			PinSet(UEXT_SPI_SCK_PORT, UEXT_SPI_SCK_PORTPIN);
+		}
+	}
+
+	#define SPI_INIT() {		\
+		PinIsOutput	(UEXT_SPI_MOSI_PORT, UEXT_SPI_MOSI_PORTPIN);	\
+		PinSet		(UEXT_SPI_MOSI_PORT, UEXT_SPI_MOSI_PORTPIN);	\
+		PinIsOutput	(UEXT_SPI_SCK_PORT, UEXT_SPI_SCK_PORTPIN);		\
+		PinSet		(UEXT_SPI_SCK_PORT, UEXT_SPI_SCK_PORTPIN);		\
+		PinIsOutput	(UEXT_SPI_CS_PORT, UEXT_SPI_CS_PORTPIN);		\
+		PinSet		(UEXT_SPI_CS_PORT, UEXT_SPI_CS_PORTPIN);		\
+	}
+
+	#define SPI_GETBUS()				PinClear(UEXT_SPI_CS_PORT, UEXT_SPI_CS_PORTPIN)
+	#define SPI_RELEASEBUS()			PinSet(UEXT_SPI_CS_PORT, UEXT_SPI_CS_PORTPIN)
+	#define SPI_WAITCOMPLETE()
+	#define SPI_WRITEBYTE(data) 		spi_write(data)
+	#define SPI_WRITEBYTES(pdata, len) 	while(len--) spi_write(*pdata++)
+
+#elif SPI_METHOD == SPI_METHOD_AT91
+
+	#if UEXT_SPI_SCK_PORTPIN == 22
+		// Assume it is on SPI1
+		#define UEXT_SPI_DEV		AT91C_BASE_SPI1
+		#define UEXT_SPI_ID			AT91C_ID_SPI1
+		#define UEXT_SPI_PORT		AT91C_BASE_PIOA
+		#define UEXT_SPI_PERIPH		PIO_BSR
+	#else
+		// Assume it is on SPI0
+		#define UEXT_SPI_DEV		AT91C_BASE_SPI0
+		#define UEXT_SPI_ID			AT91C_ID_SPI0
+		#define UEXT_SPI_PORT		AT91C_BASE_PIOA
+		#define UEXT_SPI_PERIPH		PIO_ASR
+	#endif
+
+	#define SPI_INIT() {											\
+		UEXT_SPI_PORT->PIO_MDDR			= (1<<UEXT_SPI_CS_PORTPIN) | (1<<UEXT_SPI_SCK_PORTPIN) | (1<<UEXT_SPI_MOSI_PORTPIN) | (1<<UEXT_SPI_MISO_PORTPIN); \
+		UEXT_SPI_PORT->PIO_PPUER		= 1<<UEXT_SPI_MISO_PORTPIN;	\
+		UEXT_SPI_PORT->PIO_PDR			= (1<<UEXT_SPI_CS_PORTPIN) | (1<<UEXT_SPI_SCK_PORTPIN) | (1<<UEXT_SPI_MOSI_PORTPIN) | (1<<UEXT_SPI_MISO_PORTPIN); \
+		UEXT_SPI_PORT->UEXT_SPI_PERIPH	= (1<<UEXT_SPI_CS_PORTPIN) | (1<<UEXT_SPI_SCK_PORTPIN) | (1<<UEXT_SPI_MOSI_PORTPIN) | (1<<UEXT_SPI_MISO_PORTPIN); \
+		AT91C_BASE_PMC->PMC_PCER		= 1 << UEXT_SPI_ID;			\
+		UEXT_SPI_DEV->SPI_CR			= 0x81;						\
+		UEXT_SPI_DEV->SPI_CR			= 0x81;						\
+		UEXT_SPI_DEV->SPI_CR			= 0x01;						\
+		UEXT_SPI_DEV->SPI_MR			= 0x000E0011;				\
+		UEXT_SPI_DEV->SPI_CSR[0]		= SPI_CONFIG_REGISTER;		\
+	}
+
+	#define SPI_WAITCOMPLETE()			while(!(UEXT_SPI_DEV->SPI_SR & AT91C_SPI_TXEMPTY))
+	#define SPI_GETBUS()
+	#define SPI_RELEASEBUS()
+	#define SPI_WRITEBYTE(data) {									\
+		while(!(UEXT_SPI_DEV->SPI_SR & AT91C_SPI_TDRE));			\
+		UEXT_SPI_DEV->SPI_TDR = data;								\
+	}
+	#define SPI_WRITEBYTES(pdata, len) 	while(len--) SPI_WRITEBYTE(*pdata++)
+
+#elif SPI_METHOD == SPI_METHOD_CHIBIOS
+
+	static const SPIConfig spiconfig = {
+		0,
+		/* HW dependent part.*/
+		UEXT_SPI_CS_PORT,
+		UEXT_SPI_CS_PORTPIN,
+		SPI_CONFIG_REGISTER
+	};
+
+	#define SPI_INIT()
+
+	#define SPI_GETBUS() {											\
+		spiStart(UEXT_SPI, &spiconfig);								\
+		spiSelect(UEXT_SPI);										\
+	}
+
+	#define SPI_RELEASEBUS() {										\
+		spiUnselect(UEXT_SPI);										\
+		spiStop(UEXT_SPI);											\
+	}
+
+	#define SPI_WAITCOMPLETE()
+	#define SPI_WRITEBYTE(data)				spiSend(UEXT_SPI, 1, &data)
+	#define SPI_WRITEBYTES(pdata, len)		spiSend(UEXT_SPI, len, pdata)
+
+#else
+	#error "TLS8204 board file: Unsupported SPI method"
+#endif
+
+static inline void init_board(GDisplay *g) {
+	(void) g;
+
+	PinIsOutput	(PORT_DC, PIN_DC);
+	PinIsOutput	(PORT_RESET, PIN_RESET);
+	PinSet		(PORT_RESET, PIN_RESET);
+
+	SPI_INIT();
+}
+
+static inline void post_init_board(GDisplay *g) {
+	(void) g;
+}
+
+static inline void setpin_reset(GDisplay *g, bool_t state) {
+	(void) g;
+	(void) state;
+
+	if (state)
+		PinClear(PORT_RESET, PIN_RESET);
+	else
+		PinSet(PORT_RESET, PIN_RESET);
+}
+
+static inline void set_backlight(GDisplay *g, uint8_t percent) {
+	(void) g;
+	(void) percent;
+}
+
+static inline void acquire_bus(GDisplay *g) {
+	(void) g;
+
+	SPI_GETBUS();
+}
+
+static inline void release_bus(GDisplay *g) {
+	(void) g;
+
+	SPI_WAITCOMPLETE();
+	SPI_RELEASEBUS();
+}
+
+static inline void write_cmd(GDisplay *g, uint8_t cmd) {
+	(void) g;
+
+	// Command mode please
+	SPI_WAITCOMPLETE();
+	PinClear(PORT_DC, PIN_DC);
+
+	SPI_WRITEBYTE(cmd);
+}
+
+static inline void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
+	(void) g;
+
+	// Data mode please
+	SPI_WAITCOMPLETE();
+	PinSet(PORT_DC, PIN_DC);
+
+	SPI_WRITEBYTES(data, length);
+}
+
+#endif /* _GDISP_LLD_BOARD_H */