Removed TDISP module

2 files changed, 0 insertions, 181 deletions

diff --git a/boards/addons/tdisp/HD44780/tdisp_lld_board_olimex_e407.h b/boards/addons/tdisp/HD44780/tdisp_lld_board_olimex_e407.h
deleted file mode 100644
index 12407356..00000000
--- a/boards/addons/tdisp/HD44780/tdisp_lld_board_olimex_e407.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-/**
- * @file    drivers/tdisp/HD44780/tdisp_lld_board_olimex_e407.h
- * @brief   TDISP driver subsystem board interface for the HD44780 display
- *
- * @addtogroup TDISP
- * @{
- */
-
-#ifndef _TDISP_LLD_BOARD_H
-#define _TDISP_LLD_BOARD_H
-
-/* Configure these to match the hardware connections on your board */
-#define BUS_4BITS	FALSE
-#define PORT_DATA	GPIOG
-#define PORT_CTRL	GPIOE
-#define PIN_RS		0
-#define PIN_RW		1
-#define PIN_EN		2
-
-static void init_board(void) {
-	palSetGroupMode(PORT_CTRL, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
-	palSetGroupMode(PORT_DATA, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
-	palClearPad(PORT_CTRL, PIN_RW);
-}
-
-static void writeToLCD(uint8_t data) {
-	palWritePort(PORT_DATA, data);
-	palSetPad(PORT_CTRL, PIN_EN);
-	gfxSleepMicroseconds(1);
-	palClearPad(PORT_CTRL, PIN_EN);
-	gfxSleepMicroseconds(5);
-}
-
-static void write_cmd(uint8_t data) {
-	palClearPad(PORT_CTRL, PIN_RS);
-	#if BUS_4BITS
-		writeToLCD(data>>4);
-	#endif
-	writeToLCD(data);
-}
-
-static void write_data(uint8_t data) {
-	palSetPad(PORT_CTRL, PIN_RS);
-	#if BUS_4BITS
-		writeToLCD(data>>4);
-	#endif
-	writeToLCD(data);
-}
-
-#endif /* _TDISP_LLD_BOARD_H */
-/** @} */
-
diff --git a/boards/addons/tdisp/HD44780/tdisp_lld_board_st_stm32f4_discovery.h b/boards/addons/tdisp/HD44780/tdisp_lld_board_st_stm32f4_discovery.h
deleted file mode 100644
index 43e161f1..00000000
--- a/boards/addons/tdisp/HD44780/tdisp_lld_board_st_stm32f4_discovery.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-/**
- * @file    drivers/tdisp/HD44780/tdisp_lld_board_st_stm32f4_discovery.h
- * @brief   TDISP driver subsystem board interface for the HD44780 display
- *
- * @addtogroup TDISP
- * @{
- */
-
-#ifndef _TDISP_LLD_BOARD_H
-#define _TDISP_LLD_BOARD_H
-
-/* Configure these to match the hardware connections on your board */
-#define BUS_4BITS	TRUE
-
-/* Configure the bitoffset in the dataport so they match with the
- * hardware pins. An offset of 0 means bit0 stays at bit0 of the dataport.
- * If the offset is set to 3, bit0 of the nibble will be positioned at
- * P[A..G]3 of the hardware-port.
- */
-#define hardware_offset	3
-
-/* The port where the data is sent to. In the
- * low-leveldriver het hardware_offset is taken
- * into account. If for example the hardware_offset
- * is set to 3, then de data will be sent to
- * PE3, PE4, PE5 en PE6, if the dataport where GPIOE.
- */
-#define PORT_DATA	GPIOE
-
-/* The port used to controle the controle lines of
- * the display.
- */
-#define PORT_CTRL	GPIOD
-/* Pin to controle the R/S-line of the display */
-#define PIN_RS		0
-/* Pin to controle the EN-line of the display */
-#define PIN_EN		1
-/* Pin to controle the R/W-pin of the display.
- * If reading of the display is not used disable
- * reading in the gfxconf.h and put a dummy value here
- * as it will not be used.
- */
-#define PIN_RW		7
-
-
-static void init_board(void) {
-	/* Initialize the ports for data and controle-lines */
-	palSetGroupMode(PORT_CTRL, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
-	palSetGroupMode(PORT_DATA, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
-	/* Set alle controle pins to low */
-	palClearPad(PORT_CTRL, PIN_RS);
-	palClearPad(PORT_CTRL, PIN_EN);
-	#if TDISP_NEED_READ
-	  palClearPad(PORT_CTRL, PIN_RW);
-	#endif
-}
-
-/* This is the low-level routine for sending the bits
- * to the LCD-display. This routine shifts
- * the bits so they match the hardware port.
- */
-static void writeToLCD(uint8_t data) {
-	palWritePort(PORT_DATA, data<<hardware_offset);
-	palSetPad(PORT_CTRL, PIN_EN);
-	gfxSleepMicroseconds(1);
-	palClearPad(PORT_CTRL, PIN_EN);
-	/* wait a little while so that de display can process the data */
-	gfxSleepMicroseconds(5);
-}
-
-/* Writes a command to the display. The
- * RS-line is pulled low and than the
- * data is send.
- */
-static void write_cmd(uint8_t data) {
-	palClearPad(PORT_CTRL, PIN_RS);
-	#if BUS_4BITS
-		/* first send the high-nibble */
-		writeToLCD(data>>4);
-	#endif
-	/* send the low-nibble */
-	#if BUS_4BITS
-		/* in 4-bit mode the high-nibble is zeroed out */
-		writeToLCD(data & 0x0F);
-	#else
-		writeToLCD(data);
-	#endif
-}
-
-// static void write_initcmd(uint8_t data) {
-//   write_cmd(data);
-// }
-
-/* Write data to the display. The
- * RS-line is pulled high and than the
- * data is send.
- */
-static void write_data(uint8_t data) {
-	palSetPad(PORT_CTRL, PIN_RS);
-	#if BUS_4BITS
-		/* first send the high-nibble */
-		writeToLCD(data>>4);
-	#endif
-	/* send the low-nibble */
-	#if BUS_4BITS
-		/* in 4-bit mode the high-nibble is zeroed out */
-		writeToLCD(data & 0x0F);
-	#else
-		writeToLCD(data);
-	#endif
-}
-
-#endif /* _TDISP_LLD_BOARD_H */
-/** @} */
-